Revision 11:755119e91ed4, committed 2015-05-06

Comitter:

sphasim

Date:

Wed May 06 16:02:10 2015 +0000

Parent:

10:66f5d56781d9

Commit message:

Ready for submission

Changed in this revision

diff -r 66f5d56781d9 -r 755119e91ed4 LCD_pedometer_mtr8_v5.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/LCD_pedometer_mtr8_v5.cpp	Wed May 06 16:02:10 2015 +0000
@@ -0,0 +1,237 @@
+#include "mbed.h"
+#include "MMA8451Q8.h"
+#include "SLCD.h"
+/* 
+Test of the accelerometer, digital I/O, on-board LCD screen, and 16-bit ADC.
+ Looing at vector product of the x-y components of the accelerometer.
+ Works pretty well. Still rough, program wise - sc 140710
+ Addiing touch sensor to replace potentiometer.
+ Show x and y components 
+ */
+
+#define BLINKTIME 0.7
+#define DATATIME 0.5
+#define DATADISPDWELL 0.2
+#define NUMLEDS 2
+#define LEDON 0
+#define LEDOFF 1
+#define SCALING 13
+#define LCDLEN 10
+#define RSTARTMESS "PNCH"
+#define MAXVECT "MAXV"
+#define XCOMP "XCMP"
+#define YCOMP "YCMP"
+#define ZCOMP "ZCMP"
+#define ANALTOVOLTS 3.3
+#define LEDDELAY 0.400
+//define states
+#define NUMSTATES 4
+#define XCOMPD 0
+#define YCOMPD 1
+#define ZCOMPD 2
+#define VMAXD 3
+#define MAXGS 8
+#define COUNTSCALE 1
+#define REG_WHO_AM_I      0x0D
+#define XYZ_DATA_CFG      0x0E
+
+#define REG_OUT_X_MSB     0x01
+#define REG_OUT_Y_MSB     0x03
+#define REG_OUT_Z_MSB     0x05
+
+#define MAX_2G            0x00
+#define MAX_4G            0x01
+#define MAX_8G            0x02
+
+
+#define PROGNAME "LCD_punch_mtr 8 v5\r/n"
+#define LCDNAME "PC.V5"
+
+
+//#define PRINTDBUG
+// Accelerometer SPI pins
+#if   defined (TARGET_KL25Z) || defined (TARGET_KL46Z)
+  PinName const SDA = PTE25;
+  PinName const SCL = PTE24;
+#elif defined (TARGET_KL05Z)
+  PinName const SDA = PTB4;
+  PinName const SCL = PTB3;
+#else
+  #error TARGET NOT DEFINED
+#endif
+
+#define MMA8451_I2C_ADDRESS (0x1d<<1)
+
+SLCD slcd; //define LCD display
+Timer blinkTimer;
+Timer dataTimer;
+Timer displayTimer;
+MMA8451Q acc(SDA, SCL, MMA8451_I2C_ADDRESS);
+AnalogIn TMP01(PTB1);
+DigitalOut LEDs[NUMLEDS]={LED_RED, LED_GREEN}; //Indicator LEDs
+Serial pc(USBTX, USBRX);
+char displayTitles[NUMSTATES][LCDLEN] = {XCOMP,YCOMP,ZCOMP,MAXVECT};
+float accaxisdata[NUMSTATES];
+char displayformats[NUMSTATES][LCDLEN] = {"%4.0f","y.%3.2f","z.%3.2f","v.%3.2f"};
+
+void LCDMess(char *lMess, float dWait){
+        slcd.Home();
+        slcd.clear();
+        slcd.printf(lMess);
+        wait(dWait);
+} 
+void LCDMessNoDwell(char *lMess){
+        slcd.Home();
+        slcd.clear();
+        slcd.printf(lMess);
+} 
+
+
+void allLEDsOFF(int numberOfLEDS) {
+    int i;
+    for (i=0;i<numberOfLEDS; i++){
+            LEDs[i] = LEDOFF;
+        }
+
+}
+
+void runLEDs(int numberOfLEDS) {
+    int i;
+    for (i=0;i<numberOfLEDS; i++){
+            LEDs[i] = LEDON;
+            wait(0.2);
+        }
+   allLEDsOFF(numberOfLEDS);     
+}
+
+
+
+int main() {
+    
+    int RButtonState;
+    int LButtonState;
+    DigitalIn RtButton(PTC12);
+    DigitalIn LftButton(PTC3);
+    int displayState = XCOMPD; 
+    float xAcc = 0.0;
+    float yAcc = 0.0;
+    float zAcc = 0.0;
+    float previous_xAcc = 0.0;
+    float xAccDiff = 0.0;
+    int xcounter = 0;
+    float previous_yAcc = 0.0;
+    float yAccDiff = 0.0;
+    int ycounter = 0;
+    float previous_zAcc = 0.0;
+    float zAccDiff = 0.0;
+    int zcounter = 0;
+    float vector;
+    float vMax = 0.0;
+    float DisplayTime = DATADISPDWELL;
+    float LEDDwell = BLINKTIME;
+    int outState = false;
+    char lcdData[LCDLEN]; //buffer needs places dor decimal pt and colon
+    uint8_t regData = MAX_4G; // test value must change after G setting
+    
+#ifdef PRINTDBUG
+        pc.printf(PROGNAME);
+#endif
+    LCDMess(LCDNAME, BLINKTIME);
+// Initialze readings and sequence the LED's for dramtic effect.
+    allLEDsOFF(NUMLEDS);
+    blinkTimer.start();
+    blinkTimer.reset();
+    displayTimer.start();
+    displayTimer.reset();
+    dataTimer.start();
+    dataTimer.reset();
+    LCDMess(RSTARTMESS, BLINKTIME);
+// Go into registers ofn Accelerometer, change sensitivity then test.
+// http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8451Q.pdf
+// See page 26
+// Set 2 g max limit ****************** Note limits
+    acc.setGLimit(MAX_4G); // For now set to 2g
+    acc.readRegs(XYZ_DATA_CFG, &regData, 1);
+    sprintf (lcdData,"%d",regData);
+    LCDMess(lcdData,BLINKTIME);
+    acc.readRegs(REG_WHO_AM_I, &regData, 1);
+    sprintf (lcdData,"%d",regData);
+    LCDMess(lcdData,BLINKTIME);   
+// main loop forever 
+    while(true) {
+
+// Handle user input for display selections
+        RButtonState = !RtButton; // button is pulled up so false is when button is pushed it's inverted to avoid confusion downstream
+        if (RButtonState){
+            vMax = 0.0; // Clear vMax
+            LCDMess(RSTARTMESS, BLINKTIME);
+        }
+        LButtonState = !LftButton;
+        if (LButtonState) {  //Change data that is displayed
+            displayState = (displayState + 1) % NUMSTATES;
+            // Change to switch/case soon.
+            LCDMess(displayTitles[displayState],BLINKTIME);     
+        }
+    
+// --------------------------------------------
+        while (dataTimer.read() > DATATIME){
+
+// No offset
+            xAcc = (acc.getAccX());
+            xCounts = acc.getAccAxis(REG_OUT_X_MSB);
+            yAcc = (acc.getAccY());
+            yCounts = acc.getAccAxis(REG_OUT_Y_MSB);
+            zAcc = (acc.getAccZ());
+            zCounts = acc.getAccAxis(REG_OUT_Z_MSB);
+            
+            
+            //xsteps
+            xAccDiff = abs(previous_xAcc - xAcc);
+            if (xAccDiff > 0.02){
+                xcounter++;                
+            };
+            
+            //ysteps
+            yAccDiff = abs(previous_yAcc - yAcc);
+            if (yAccDiff > 0.03){
+                ycounter++;                
+            };
+            
+            //zsteps
+            zAccDiff = abs(previous_zAcc - zAcc);
+            if (zAccDiff > 0.01){
+                zcounter++;                
+            };
+            
+            previous_xAcc = xAcc;
+            previous_yAcc = yAcc;
+            previous_zAcc = zAcc;
+            printf("%1.2f    %1.2f   %1.2f   %1.2f   %d   %1.2f   %d   %1.2f   %d\n", xAcc, yAcc, zAcc, xAccDiff, xcounter, yAccDiff,  ycounter, zAccDiff,  zcounter);
+           
+//Prepare data for LCD display 
+            accaxisdata[XCOMPD] = abs((float)xcounter/COUNTSCALE); // scalling is set to 1 at this point
+            accaxisdata[YCOMPD] = abs((float)ycounter/COUNTSCALE);
+            accaxisdata[ZCOMPD] = abs((float)zcounter/COUNTSCALE);
+            
+            
+            accaxisdata[VMAXD] = vMax;
+            dataTimer.reset();
+            LEDDwell = 1.1 - vMax/MAXGS;
+        }
+
+// Display the appropriate data on the LCD based upon what mode was chosen
+        while (displayTimer.read() > DisplayTime){
+            sprintf (lcdData,displayformats[displayState],accaxisdata[displayState]);          
+            LCDMessNoDwell(lcdData);
+            displayTimer.reset();
+        } // displaytimer 
+// Wait then do the whole thing again.  
+// Alive LEDs
+        while(blinkTimer.read()> LEDDwell) {     
+            LEDs[0].write(outState);
+            LEDs[1].write(!outState);
+            outState = !outState; 
+            blinkTimer.reset();
+        } 
+    }//forever loop
+}// main

diff -r 66f5d56781d9 -r 755119e91ed4 LCD_punch_mtr8_v5.cpp
--- a/LCD_punch_mtr8_v5.cpp	Tue Apr 28 23:12:14 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,223 +0,0 @@
-#include "mbed.h"
-#include "MMA8451Q8.h"
-#include "SLCD.h"
-/* 
-Test of the accelerometer, digital I/O, on-board LCD screen, and 16-bit ADC.
- Looing at vector product of the x-y components of the accelerometer.
- Works pretty well. Still rough, program wise - sc 140710
- Addiing touch sensor to replace potentiometer.
- Show x and y components 
- */
-
-#define BLINKTIME 0.7
-#define DATATIME 0.1
-#define DATADISPDWELL 0.2
-#define NUMLEDS 2
-#define LEDON 0
-#define LEDOFF 1
-#define SCALING 13
-#define LCDLEN 10
-#define RSTARTMESS "PNCH"
-#define MAXVECT "MAXV"
-#define XCOMP "XCMP"
-#define YCOMP "YCMP"
-#define ZCOMP "ZCMP"
-#define ANALTOVOLTS 3.3
-#define LEDDELAY 0.400
-//define states
-#define NUMSTATES 4
-#define XCOMPD 0
-#define YCOMPD 1
-#define ZCOMPD 2
-#define VMAXD 3
-#define MAXGS 8
-#define COUNTSCALE 1
-#define REG_WHO_AM_I      0x0D
-#define XYZ_DATA_CFG      0x0E
-
-#define REG_OUT_X_MSB     0x01
-#define REG_OUT_Y_MSB     0x03
-#define REG_OUT_Z_MSB     0x05
-
-#define MAX_2G            0x00
-#define MAX_4G            0x01
-#define MAX_8G            0x02
-
-
-#define PROGNAME "LCD_punch_mtr 8 v5\r/n"
-#define LCDNAME "PC.V5"
-
-
-//#define PRINTDBUG
-// Accelerometer SPI pins
-#if   defined (TARGET_KL25Z) || defined (TARGET_KL46Z)
-  PinName const SDA = PTE25;
-  PinName const SCL = PTE24;
-#elif defined (TARGET_KL05Z)
-  PinName const SDA = PTB4;
-  PinName const SCL = PTB3;
-#else
-  #error TARGET NOT DEFINED
-#endif
-
-#define MMA8451_I2C_ADDRESS (0x1d<<1)
-
-SLCD slcd; //define LCD display
-Timer blinkTimer;
-Timer dataTimer;
-Timer displayTimer;
-MMA8451Q acc(SDA, SCL, MMA8451_I2C_ADDRESS);
-AnalogIn TMP01(PTB1);
-DigitalOut LEDs[NUMLEDS]={LED_RED, LED_GREEN}; //Indicator LEDs
-Serial pc(USBTX, USBRX);
-char displayTitles[NUMSTATES][LCDLEN] = {XCOMP,YCOMP,ZCOMP,MAXVECT};
-float accaxisdata[NUMSTATES];
-char displayformats[NUMSTATES][LCDLEN] = {"%4.0f","y.%3.2f","z.%3.2f","v.%3.2f"};
-
-void LCDMess(char *lMess, float dWait){
-        slcd.Home();
-        slcd.clear();
-        slcd.printf(lMess);
-        wait(dWait);
-} 
-void LCDMessNoDwell(char *lMess){
-        slcd.Home();
-        slcd.clear();
-        slcd.printf(lMess);
-} 
-
-
-void allLEDsOFF(int numberOfLEDS) {
-    int i;
-    for (i=0;i<numberOfLEDS; i++){
-            LEDs[i] = LEDOFF;
-        }
-
-}
-
-void runLEDs(int numberOfLEDS) {
-    int i;
-    for (i=0;i<numberOfLEDS; i++){
-            LEDs[i] = LEDON;
-            wait(0.2);
-        }
-   allLEDsOFF(numberOfLEDS);     
-}
-
-
-
-int main() {
-    
-    int RButtonState;
-    int LButtonState;
-    DigitalIn RtButton(PTC12);
-    DigitalIn LftButton(PTC3);
-    int displayState = XCOMPD; 
-    float xAcc = 0.0;
-    float yAcc = 0.0;
-    float zAcc = 0.0;
-    float previous_xAcc = 0.0;
-    float xAccDiff = 0.0;
-    int counter = 0;
-    float vector;
-    float vMax = 0.0;
-    float DisplayTime = DATADISPDWELL;
-    float LEDDwell = BLINKTIME;
-    int outState = false;
-    char lcdData[LCDLEN]; //buffer needs places dor decimal pt and colon
-    uint8_t regData = MAX_4G; // test value must change after G setting
-    int16_t xCounts;
-    int16_t yCounts;
-    int16_t zCounts;
-    
-#ifdef PRINTDBUG
-        pc.printf(PROGNAME);
-#endif
-    LCDMess(LCDNAME, BLINKTIME);
-// Initialze readings and sequence the LED's for dramtic effect.
-    allLEDsOFF(NUMLEDS);
-    blinkTimer.start();
-    blinkTimer.reset();
-    displayTimer.start();
-    displayTimer.reset();
-    dataTimer.start();
-    dataTimer.reset();
-    LCDMess(RSTARTMESS, BLINKTIME);
-// Go into registers ofn Accelerometer, change sensitivity then test.
-// http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8451Q.pdf
-// See page 26
-// Set 2 g max limit ****************** Note limits
-    acc.setGLimit(MAX_4G); // For now set to 2g
-    acc.readRegs(XYZ_DATA_CFG, &regData, 1);
-    sprintf (lcdData,"%d",regData);
-    LCDMess(lcdData,BLINKTIME);
-    acc.readRegs(REG_WHO_AM_I, &regData, 1);
-    sprintf (lcdData,"%d",regData);
-    LCDMess(lcdData,BLINKTIME);   
-// main loop forever 
-    while(true) {
-
-// Handle user input for display selections
-        RButtonState = !RtButton; // button is pulled up so false is when button is pushed it's inverted to avoid confusion downstream
-        if (RButtonState){
-            vMax = 0.0; // Clear vMax
-            LCDMess(RSTARTMESS, BLINKTIME);
-        }
-        LButtonState = !LftButton;
-        if (LButtonState) {  //Change data that is displayed
-            displayState = (displayState + 1) % NUMSTATES;
-            // Change to switch/case soon.
-            LCDMess(displayTitles[displayState],BLINKTIME);     
-        }
-    
-// --------------------------------------------
-        while (dataTimer.read() > DATATIME){
-
-// No offset
-            xAcc = (acc.getAccX());
-            xCounts = acc.getAccAxis(REG_OUT_X_MSB);
-            yAcc = (acc.getAccY());
-            yCounts = acc.getAccAxis(REG_OUT_Y_MSB);
-            zAcc = (acc.getAccZ());
-            zCounts = acc.getAccAxis(REG_OUT_Z_MSB);
-            
-            xAccDiff = abs(previous_xAcc - xAcc);
-            if (xAccDiff > 0.5){
-                counter++;                
-            };
-            previous_xAcc = xAcc;
-            printf("%1.2f    %1.2f   %1.2f   %1.2f   %d\n", xAcc, yAcc, zAcc, xAccDiff, counter);
-            
- // Calulate vector sum of x,y and z reading.       
-            vector = sqrt(pow(xAcc,2) + pow(zAcc,2));
-            vector = zAcc;
-            if (vector > vMax) {
-                vMax = vector;
-            }
-            
-//Prepare data for LCD display 
-            accaxisdata[XCOMPD] = abs((float)xCounts/COUNTSCALE); // scalling is set to 1 at this point
-            accaxisdata[YCOMPD] = abs((float)yCounts/COUNTSCALE);
-            accaxisdata[ZCOMPD] = abs((float)zCounts/COUNTSCALE);
-            
-            accaxisdata[VMAXD] = vMax;
-            dataTimer.reset();
-            LEDDwell = 1.1 - vMax/MAXGS;
-        }
-
-// Display the appropriate data on the LCD based upon what mode was chosen
-        while (displayTimer.read() > DisplayTime){
-            sprintf (lcdData,displayformats[displayState],accaxisdata[displayState]);          
-            LCDMessNoDwell(lcdData);
-            displayTimer.reset();
-        } // displaytimer 
-// Wait then do the whole thing again.  
-// Alive LEDs
-        while(blinkTimer.read()> LEDDwell) {     
-            LEDs[0].write(outState);
-            LEDs[1].write(!outState);
-            outState = !outState; 
-            blinkTimer.reset();
-        } 
-    }//forever loop
-}// main

diff -r 66f5d56781d9 -r 755119e91ed4 SP_LCD_pedometer_mtr_8_v5_class.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SP_LCD_pedometer_mtr_8_v5_class.lib	Wed May 06 16:02:10 2015 +0000
@@ -0,0 +1,1 @@
+http://developer.mbed.org/users/vbharam/code/Vishal_LCD_punch_mtr_8_v5_class/#66f5d56781d9