Etherios Cloud Connector very first porting for mbed. Tested in an LPC1768

Etherios Cloud Connector for Embedded v2.1.0.3 library for mbed. Early porting.

This port is centered mainly in the platform code. So it should work properly with the provided examples of send_data, device_request, data_points, RCI and firmware_update (stub implementation, not a real one... yet ;-)). Filesystem is not implemented yet, and some examples might need changes.

To run, it needs the following libraries: - mbed - mbed-rtos - EthernetInterface

Find more information (and the source code!) about Etherios Cloud Connector for Embedded here: http://www.etherios.com/products/devicecloud/support/connector and in: http://www.etherios.com

Revision:
0:1c358ea10753
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/private/connector_sm_cmd.h	Tue Dec 03 13:34:02 2013 +0000
@@ -0,0 +1,1125 @@
+/*
+ * Copyright (c) 2013 Digi International Inc.,
+ * All rights not expressly granted are reserved.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this file,
+ * You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * Digi International Inc. 11001 Bren Road East, Minnetonka, MN 55343
+ * =======================================================================
+ */
+static connector_status_t sm_copy_user_request(connector_sm_data_t * const sm_ptr, connector_sm_session_t * const session)
+{
+    connector_status_t result = connector_abort;
+    connector_bool_t response_needed;
+
+    ASSERT_GOTO(sm_ptr->pending.data != NULL, error);
+    session->bytes_processed = 0;
+
+    switch (sm_ptr->pending.request)
+    {
+        case connector_initiate_ping_request:
+        {
+            connector_sm_send_ping_request_t const * const request = sm_ptr->pending.data;
+
+            session->user.context = request->user_context;
+            session->user.header = NULL;
+            session->command = connector_sm_cmd_ping;
+            response_needed = request->response_required;
+            session->sm_state = connector_sm_state_prepare_segment;
+            break;
+        }
+#if (defined CONNECTOR_DATA_SERVICE)
+        case connector_initiate_send_data:
+        {
+            connector_request_data_service_send_t const * const request = sm_ptr->pending.data;
+
+            session->user.context = request->user_context;
+            session->user.header = request->path;
+            session->command = (request->path != NULL) ? connector_sm_cmd_data : connector_sm_cmd_no_path_data;
+            response_needed = request->response_required;
+            session->sm_state = connector_sm_state_get_total_length;
+            #if (defined CONNECTOR_DATA_POINTS)
+            if (request->path != NULL)
+            {
+                char const dp_prefix[] = "DataPoint/";
+                size_t const dp_prefix_bytes = sizeof dp_prefix - 1;
+
+                if (!strncmp(request->path, dp_prefix, dp_prefix_bytes))
+                    SmSetDatapoint(session->flags);
+            }
+            #endif
+            break;
+        }
+#endif
+        default:
+            ASSERT_GOTO(connector_false, error);
+            break;
+    }
+
+    if (response_needed) SmSetResponseNeeded(session->flags);
+
+    result = connector_working;
+
+error:
+    return result;
+}
+
+static void sm_verify_result(connector_sm_data_t * const sm_ptr, connector_status_t * const result)
+{
+    switch (*result)
+    {
+        case connector_pending:
+        case connector_working:
+        case connector_idle:
+            goto done;
+
+        case connector_invalid_data_size:
+            connector_debug_printf("WARNING: received a 'connector_invalid_data_size'\n");
+            break;
+        case connector_abort:
+        case connector_invalid_response:
+            sm_ptr->close.status = connector_close_status_abort;
+            break;
+
+        default:
+            sm_ptr->close.status = connector_close_status_device_error;
+            break;
+    }
+
+    *result = connector_working;
+    switch(sm_ptr->transport.state)
+    {
+        case connector_transport_idle:
+        case connector_transport_close:
+        case connector_transport_terminate:
+            break;
+
+        default:
+            sm_ptr->transport.state = connector_transport_close;
+            break;
+    }
+
+done:
+    return;
+}
+
+#if (defined CONNECTOR_COMPRESSION) || (defined CONNECTOR_SM_MULTIPART)
+static size_t sm_get_max_payload_bytes(connector_sm_data_t * const sm_ptr)
+{
+    size_t const sm_header_size = 5;
+    
+    /* This is used for Rx path... */
+    size_t const max_payload_bytes = sm_ptr->transport.sm_mtu_rx - sm_header_size;
+
+    return max_payload_bytes;
+}
+#endif
+
+static connector_status_t sm_allocate_user_buffer(connector_data_t * const connector_ptr, sm_data_block_t * const dblock)
+{
+    void * ptr = NULL;
+    connector_status_t result = connector_working;
+
+    if (dblock->bytes > 0)
+    {
+        ASSERT(dblock->data == NULL);
+        result = malloc_data_buffer(connector_ptr, dblock->bytes, named_buffer_id(sm_data_block), &ptr);
+    }
+
+    dblock->data = ptr;
+
+    return result;
+}
+
+static connector_status_t sm_map_callback_status_to_connector_status(connector_callback_status_t const callback_status)
+{
+    connector_status_t result;
+
+    switch (callback_status)
+    {
+        case connector_callback_continue:
+            result = connector_working;
+            break;
+
+        case connector_callback_busy:
+            result = connector_pending;
+            break;
+
+        case connector_callback_error:
+            result = connector_device_error;
+            break;
+
+        default:
+            result = connector_abort;
+            break;
+    }
+
+    return result;
+}
+
+#if (defined CONNECTOR_DATA_SERVICE)
+static connector_callback_status_t sm_inform_data_complete(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_request_id_t request_id;
+    connector_callback_status_t callback_status;
+    connector_data_service_status_t status_info;
+
+    status_info.transport = session->transport;
+    status_info.user_context = session->user.context;
+    status_info.session_error = connector_session_error_none;
+    switch (session->error)
+    {
+        case connector_sm_error_cancel:
+            status_info.status = connector_data_service_status_cancel;
+            break;
+
+        case connector_sm_error_timeout:
+            status_info.status = connector_data_service_status_timeout;
+            break;
+
+        case connector_sm_error_complete:
+            status_info.status = connector_data_service_status_complete;
+            break;
+
+        case connector_sm_error_no_resource:
+            status_info.session_error = connector_session_error_memory;
+            /* no break */
+        default:
+            status_info.status = connector_data_service_status_session_error;
+            break;
+    }
+
+    #if (defined CONNECTOR_DATA_POINTS)
+    if (SmIsDatapoint(session->flags))
+    {
+        callback_status = dp_handle_callback(connector_ptr, connector_request_id_data_service_send_status, &status_info);
+    }
+    else
+    #endif
+    {
+        request_id.data_service_request = SmIsClientOwned(session->flags) ? connector_request_id_data_service_send_status : connector_request_id_data_service_receive_status;
+        callback_status = connector_callback(connector_ptr->callback, connector_class_id_data_service, request_id, &status_info);
+    }
+
+    return callback_status;
+}
+#endif
+
+#if (defined CONNECTOR_SM_CLI)
+static connector_callback_status_t sm_inform_cli_complete(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_request_id_t request_id;
+    connector_callback_status_t callback_status;
+    connector_sm_cli_status_t cb_data;
+
+    cb_data.transport = session->transport;
+    cb_data.user_context = session->user.context;
+    cb_data.status = (session->error == connector_sm_error_cancel) ? connector_sm_cli_status_cancel : connector_sm_cli_status_error;
+    request_id.sm_request = connector_request_id_sm_cli_status;
+    callback_status = connector_callback(connector_ptr->callback, connector_class_id_short_message, request_id, &cb_data);
+    if (callback_status == connector_callback_unrecognized)
+        callback_status = connector_callback_error;
+
+    return callback_status;
+}
+#endif
+
+static connector_callback_status_t sm_inform_ping_complete(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_callback_status_t callback_status = connector_callback_continue;
+
+    if (SmIsClientOwned(session->flags))
+    {
+        connector_request_id_t request_id;
+        connector_sm_ping_response_t cb_data;
+
+        cb_data.transport = session->transport;
+        cb_data.user_context = session->user.context;
+        switch (session->error)
+        {
+            case connector_sm_error_none:
+                cb_data.status = connector_sm_ping_status_success;
+                break;
+
+            case connector_sm_error_cancel:
+                cb_data.status = connector_sm_ping_status_cancel;
+                break;
+
+            case connector_sm_error_timeout:
+                cb_data.status = connector_sm_ping_status_timeout;
+                break;
+
+            case connector_sm_error_complete:
+                cb_data.status = connector_sm_ping_status_complete;
+                break;
+
+            default:
+                cb_data.status = connector_sm_ping_status_error;
+                break;
+        }
+
+        request_id.sm_request = connector_request_id_sm_ping_response;
+        callback_status = connector_callback(connector_ptr->callback, connector_class_id_short_message, request_id, &cb_data);
+        if (callback_status == connector_callback_unrecognized)
+            callback_status = connector_callback_continue;
+    }
+
+    return callback_status;
+}
+
+static connector_status_t sm_inform_session_complete(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_status_t result;
+    connector_callback_status_t callback_status = connector_callback_continue;
+
+    if (session->sm_state == connector_sm_state_complete) goto done;
+
+    switch (session->command)
+    {
+        case connector_sm_cmd_data:
+        case connector_sm_cmd_no_path_data:
+#if (defined CONNECTOR_DATA_SERVICE)
+            callback_status = sm_inform_data_complete(connector_ptr, session);
+#endif
+            break;
+
+        #if (defined CONNECTOR_SM_CLI)
+        case connector_sm_cmd_cli:
+            callback_status = sm_inform_cli_complete(connector_ptr, session);
+            break;
+        #endif
+
+        case connector_sm_cmd_ping:
+            callback_status = sm_inform_ping_complete(connector_ptr, session);
+            break;
+
+        default:
+            connector_debug_printf("sm_inform_session_complete: cancelling the session cmd [%d]\n", session->command);
+            callback_status = connector_callback_continue;
+            break;
+    }
+
+done:
+    result = sm_map_callback_status_to_connector_status(callback_status);
+
+    if (session->in.data != NULL)
+    {
+        if (free_data_buffer(connector_ptr, named_buffer_id(sm_data_block), session->in.data) != connector_working)
+            result = connector_abort;
+
+        session->in.bytes = 0;
+        session->in.data = NULL;
+    }
+
+    return result;
+}
+
+static connector_status_t sm_switch_path(connector_data_t * const connector_ptr, connector_sm_session_t * const session, connector_sm_state_t const next_state)
+{
+    connector_status_t result = connector_working;
+
+    if (session->in.data != NULL)
+    {
+        result = free_data_buffer(connector_ptr, named_buffer_id(sm_data_block), session->in.data);
+        if (result != connector_working) goto error;
+
+        session->in.bytes = 0;
+        session->in.data = NULL;
+    }
+
+    if (SmIsResponseNeeded(session->flags))
+    {
+        session->sm_state = next_state;
+        SmClearCompressed(session->flags);
+        SmClearMultiPart(session->flags);
+        SmSetResponse(session->flags);
+        session->segments.processed = 0;
+        if (session->command == connector_sm_cmd_data || session->command == connector_sm_cmd_no_path_data)
+            SmClearResponseNeeded(session->flags); /* After the response is sent, inform the user that the session is completed */
+    }
+    else
+    {
+        if (SmIsClientOwned(session->flags) && !SmIsError(session->flags)) /* If it is an error, it has already been called by sm_handle_error() */
+        {
+            session->error = connector_sm_error_complete;
+            result = sm_inform_session_complete(connector_ptr, session);
+        }
+
+        session->sm_state = connector_sm_state_complete;
+    }
+
+error:
+    return result;
+}
+
+static void sm_set_payload_process(connector_sm_session_t * const session)
+{
+    size_t const zlib_header_bytes = 2;
+
+    session->in.bytes = session->bytes_processed;
+    session->sm_state = connector_sm_state_prepare_segment;
+    session->bytes_processed = SmIsCompressed(session->flags) ? zlib_header_bytes : 0;
+}
+
+static void sm_set_payload_complete(connector_sm_session_t * const session)
+{
+    ASSERT(session->bytes_processed <= session->in.bytes);
+
+    #if (defined CONNECTOR_COMPRESSION)
+    session->sm_state = connector_sm_state_compress;
+    #else
+    sm_set_payload_process(session);
+    #endif
+}
+
+static void sm_set_header_complete(connector_sm_session_t * const session)
+{
+    if (session->bytes_processed < session->in.bytes)
+        session->sm_state = connector_sm_state_more_data;
+    else
+        sm_set_payload_complete(session);
+}
+
+static connector_status_t sm_prepare_data_request(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_status_t result = connector_abort;
+    size_t const path_length_field_bytes = 1;
+    char const * path = NULL;
+    size_t path_len = 0;
+
+    if (session->command == connector_sm_cmd_data)
+    {
+        size_t const five_bits_max_len = (1 << 5);
+
+        path = session->user.header;
+        ASSERT_GOTO(path != NULL, error);
+        path_len = strlen(path);
+        ASSERT_GOTO(path_len < five_bits_max_len, error);
+        session->in.bytes += (path_length_field_bytes + path_len);
+    }
+
+    session->bytes_processed = 0;
+    result = sm_allocate_user_buffer(connector_ptr, &session->in);
+    if (result != connector_working)
+    {
+        session->error = connector_sm_error_no_resource;
+        goto error;
+    }
+
+    if (path != NULL)
+    {
+        uint8_t * header = session->in.data;
+
+        *header++ = path_len;
+        memcpy(header, path, path_len);
+        session->bytes_processed = path_length_field_bytes + path_len;
+    }
+
+    sm_set_header_complete(session);
+
+error:
+    return result;
+}
+
+static connector_status_t sm_prepare_data_response(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_status_t const result = sm_allocate_user_buffer(connector_ptr, &session->in);
+
+    if (result == connector_working)
+    {
+        session->bytes_processed = 0;
+        sm_set_header_complete(session);
+    }
+    else
+        session->error = connector_sm_error_no_resource;
+
+    return result;
+}
+
+#if (defined CONNECTOR_SM_CLI)
+static connector_status_t sm_process_cli_request(connector_data_t * const connector_ptr, connector_sm_session_t * const session, void * const payload, size_t const bytes)
+{
+    connector_status_t result = connector_abort;
+    char * const cli_command = payload;
+    size_t cli_bytes;
+    connector_sm_data_t * sm_ptr = NULL;
+
+    if (SmIsLastData(session->flags))
+    {
+        cli_bytes = strlen(cli_command) + 1; /* +1 for nul-terminate */
+    }
+    else
+    {
+        cli_bytes = bytes;
+    }
+
+    switch (session->transport)
+    {
+        #if (defined CONNECTOR_TRANSPORT_UDP)
+        case connector_transport_udp:
+            sm_ptr = &connector_ptr->sm_udp;
+            break;
+        #endif
+
+        #if (defined CONNECTOR_TRANSPORT_SMS)
+        case connector_transport_sms:
+            sm_ptr = &connector_ptr->sm_sms;
+            break;
+        #endif
+
+        default:
+            ASSERT(connector_false);
+            break;
+    }
+
+    if (bytes > cli_bytes)
+    {
+        size_t const max_response_packets = LoadBE16(cli_command + cli_bytes);
+        size_t max_response_bytes = 0;
+
+        size_t const max_payload = sm_ptr->transport.sm_mtu_tx - record_end(segment);
+
+        if (max_response_packets == 0)
+            max_response_bytes = 0;
+        else if (max_response_packets == 1)
+            max_response_bytes = max_payload;
+        else
+        {
+            size_t const segment0_overhead_bytes = record_end(segment0) - record_end(segmentn);
+            max_response_bytes = max_response_packets * max_payload - segment0_overhead_bytes;
+        }
+
+        session->user.header = (void *)max_response_bytes;
+    }
+    else
+    {
+        session->user.header = (void *)SIZE_MAX;
+    }
+
+    {
+        connector_request_id_t request_id;
+        connector_sm_cli_request_t cli_request;
+        connector_callback_status_t callback_status;
+
+        cli_request.transport = session->transport;
+        cli_request.user_context = session->user.context;
+        cli_request.buffer = cli_command;
+        cli_request.bytes_used = cli_bytes;
+        cli_request.response_required = SmIsResponseNeeded(session->flags);
+#if (CONNECTOR_VERSION >= 0x02010000)
+        cli_request.more_data = SmIsNotLastData(session->flags);
+#endif
+
+        request_id.sm_request = connector_request_id_sm_cli_request;
+        callback_status = connector_callback(connector_ptr->callback, connector_class_id_short_message, request_id, &cli_request);
+        if (callback_status == connector_callback_unrecognized)
+            callback_status = connector_callback_error;
+        result = sm_map_callback_status_to_connector_status(callback_status);
+        if (callback_status == connector_callback_continue)
+            session->user.context = cli_request.user_context;
+    }
+
+    return result;
+}
+
+static connector_status_t sm_prepare_cli_response(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_status_t result;
+    connector_sm_cli_response_t cli_response;
+    size_t const allowed_bytes = (size_t)session->user.header;
+
+    if (session->in.data == NULL)
+    {
+        if (session->in.bytes > allowed_bytes)
+            session->in.bytes = allowed_bytes;
+
+        session->bytes_processed = 0;
+        result = sm_allocate_user_buffer(connector_ptr, &session->in);
+        if (result != connector_working)
+            goto error;
+    }
+
+    cli_response.transport = session->transport;
+    cli_response.user_context = session->user.context;
+    ASSERT(session->in.bytes >= session->bytes_processed);
+    cli_response.bytes_available = (session->in.bytes - session->bytes_processed);
+    cli_response.buffer = ((char *)session->in.data) + session->bytes_processed;
+    cli_response.bytes_used = 0;
+    cli_response.more_data = connector_false;
+
+    {
+        connector_callback_status_t status;
+        connector_request_id_t request_id;
+
+        request_id.sm_request = connector_request_id_sm_cli_response;
+        status = connector_callback(connector_ptr->callback, connector_class_id_short_message, request_id, &cli_response);
+        if (status == connector_callback_unrecognized)
+            status = connector_callback_error;
+        ASSERT(cli_response.bytes_available >= cli_response.bytes_used);
+        result = sm_map_callback_status_to_connector_status(status);
+    }
+
+    switch (result)
+    {
+        case connector_working:
+            session->bytes_processed += cli_response.bytes_used;
+            if ((!cli_response.more_data) || (session->bytes_processed >= session->in.bytes))
+                sm_set_payload_complete(session);
+            break;
+
+        case connector_device_error:
+            session->error = connector_sm_error_cancel;
+            result = connector_working;
+            break;
+
+        default:
+            break;
+    }
+
+error:
+    return result;
+}
+#endif
+
+#if (defined CONNECTOR_TRANSPORT_SMS)
+static connector_status_t sm_process_config_request(connector_data_t * const connector_ptr, connector_sm_session_t * const session, void * const payload, size_t const bytes)
+{
+    connector_status_t result = connector_success;
+    connector_sm_receive_config_request_t config_request;
+    
+    ASSERT(SmIsLastData(session->flags));
+    config_request.phone_number = payload;
+
+    {
+        size_t const phone_bytes = strlen(config_request.phone_number) + 1;
+        config_request.service_id = (phone_bytes < bytes) ? config_request.phone_number + phone_bytes : NULL;
+    }
+
+    /* Callback sms transport close/open so new phone makes effect */
+    {
+        connector_sm_data_t * const sm_ptr = &connector_ptr->sm_sms;    /* Assume it's SMS transport */
+        ASSERT(sm_ptr->network.class_id == connector_class_id_network_sms);
+
+        if (sm_ptr->network.handle != NULL)
+        {
+            connector_callback_status_t callback_status;
+            connector_request_id_t request_id;
+            connector_network_close_t close_data;
+
+            /* Close */
+            close_data.handle = sm_ptr->network.handle;
+            close_data.status = connector_close_status_device_stopped;
+
+            request_id.network_request = connector_request_id_network_close;
+            callback_status = connector_callback(connector_ptr->callback, sm_ptr->network.class_id, request_id, &close_data);
+                ASSERT(callback_status != connector_callback_unrecognized);
+            switch (callback_status)
+            {
+                case connector_callback_busy:
+                    result = connector_pending;
+                    sm_ptr->transport.state = connector_transport_receive; /* Keep on receive state to complete reconfiguration operation */
+                    goto error;
+
+                case connector_callback_continue:
+                    sm_ptr->network.handle = NULL;
+                    result = connector_working;
+                    break;
+
+                default:
+                    sm_ptr->close.status = connector_close_status_abort;
+                    break;
+            }
+        }
+        
+        if (sm_ptr->network.handle == NULL)
+        {
+            connector_callback_status_t callback_status;
+            connector_request_id_t request_id;
+            connector_network_open_t open_data;
+
+            /* Open */
+            open_data.device_cloud_url = config_request.phone_number;
+            open_data.handle = NULL;
+
+            request_id.network_request = connector_request_id_network_open;
+            callback_status = connector_callback(connector_ptr->callback, sm_ptr->network.class_id, request_id, &open_data);
+            ASSERT(callback_status != connector_callback_unrecognized);
+            switch (callback_status)
+            {
+                case connector_callback_continue:
+                    result = connector_working;
+                    sm_ptr->network.handle = open_data.handle;
+                    break;
+
+                case  connector_callback_abort:
+                    result = connector_abort;
+                    goto error;
+
+                case connector_callback_unrecognized:
+                    result = connector_unavailable;
+                    goto error;
+
+                case connector_callback_error:
+                    result = connector_open_error;
+                    goto error;
+
+                case connector_callback_busy:
+                    result = connector_pending;
+                    sm_ptr->transport.state = connector_transport_receive; /* Keep on receive state to complete reconfiguration operation */
+                    goto error;
+            }
+        }
+    }
+
+    /* Callback to config.c so user can save the new phone to persistent storage */
+#if !(defined CONNECTOR_CLOUD_PHONE)
+    result = set_config_device_cloud_phone(connector_ptr, config_request.phone_number);
+#endif
+
+    /* Callback to user */
+    {
+        connector_request_id_t request_id;
+        connector_callback_status_t callback_status;
+        config_request.transport = session->transport;
+        config_request.response_required = SmIsResponseNeeded(session->flags);
+
+        request_id.sm_request = connector_request_id_sm_config_request;
+        callback_status = connector_callback(connector_ptr->callback, connector_class_id_short_message, request_id, &config_request);
+        result = sm_map_callback_status_to_connector_status(callback_status);
+    }
+error:
+    return result;
+}
+#endif
+
+#if (defined CONNECTOR_DATA_SERVICE)
+static connector_status_t sm_pass_target_info(connector_data_t * const connector_ptr, connector_sm_session_t * const session, uint8_t * const target_ptr, size_t target_bytes)
+{
+    #define SM_TARGET_MAX_LENGTH    32
+    connector_status_t result = connector_working;
+    connector_callback_status_t callback_status;
+    connector_request_id_t request_id;
+    connector_data_service_receive_target_t cb_data;
+    char target_name[SM_TARGET_MAX_LENGTH];
+
+    cb_data.transport = session->transport;
+    cb_data.user_context = session->user.context;
+    if (target_bytes > 0)
+        memcpy(target_name, target_ptr, target_bytes);
+    target_name[target_bytes] = '\0';
+    cb_data.target = target_name;
+    cb_data.response_required = SmIsResponseNeeded(session->flags);
+
+    request_id.data_service_request = connector_request_id_data_service_receive_target;
+    callback_status = connector_callback(connector_ptr->callback, connector_class_id_data_service, request_id, &cb_data);
+    if (callback_status == connector_callback_unrecognized)
+        callback_status = connector_callback_error; 
+    result = sm_map_callback_status_to_connector_status(callback_status);
+    session->user.context = cb_data.user_context;
+
+    return result;
+}
+
+static connector_status_t sm_process_data_request(connector_data_t * const connector_ptr, connector_sm_session_t * const session, void * const payload, size_t const bytes)
+{
+    uint8_t * data_ptr = payload;
+    connector_status_t status = connector_working;
+
+    if (session->error == connector_sm_error_complete)
+        goto done;
+
+    if (session->bytes_processed == 0)
+    {
+        size_t target_length =  0;
+
+        if (session->command == connector_sm_cmd_data)
+            target_length = 0x1F & *data_ptr;
+
+        status = sm_pass_target_info(connector_ptr, session, data_ptr + 1, target_length);
+        if (status != connector_working)
+            goto error;
+
+        /* Increase target_length: 
+         * It's required for connector_sm_cmd_data to point correctly to actual data,
+         * and will be used for connector_sm_cmd_no_path_data to signal that sm_pass_target_info 
+         * has already been called */
+        target_length++;
+
+        /* Set pre-processed bytes for segment 0 */
+        session->bytes_processed = target_length;
+        
+        /* Return pending so bytes_processed and session->segments.processed are not incremented */
+        status = connector_pending;
+        SmSetTargetInPayload(session->flags);
+        goto done;
+    }
+    
+    {
+        connector_callback_status_t callback_status;
+        connector_request_id_t request_id;
+        connector_data_service_receive_data_t cb_data;
+        size_t bytes_pre_processed =  0;
+        
+        /* Compute pre-processed bytes for segment 0 */
+        if (SmIsTargetInPayload(session->flags) && (session->command == connector_sm_cmd_data))
+            bytes_pre_processed = session->bytes_processed;
+
+        data_ptr += bytes_pre_processed;
+        
+        cb_data.transport = session->transport;
+        cb_data.user_context = session->user.context;
+        cb_data.buffer = data_ptr;
+        cb_data.bytes_used = bytes - bytes_pre_processed;
+        cb_data.more_data = SmIsNotLastData(session->flags);
+        request_id.data_service_request = connector_request_id_data_service_receive_data;
+        callback_status = connector_callback(connector_ptr->callback, connector_class_id_data_service, request_id, &cb_data);
+        if (callback_status == connector_callback_unrecognized)
+            callback_status = connector_callback_error;
+        if (callback_status != connector_callback_busy)
+            SmClearTargetInPayload(session->flags);  
+        status = sm_map_callback_status_to_connector_status(callback_status);
+        session->user.context = cb_data.user_context;
+    }
+
+error:
+    switch (status)
+    {
+        case connector_device_error:
+            session->error = connector_sm_error_complete;
+            session->bytes_processed = bytes;
+            status = connector_working;
+            break;
+
+        case connector_working:
+            /* Restore pre-processed bytes for segment 0 */
+            if (session->segments.processed == 0)
+                session->bytes_processed = 0;
+            break;
+
+        default:
+            break;
+    }
+
+done:
+    return status;
+}
+
+static connector_status_t sm_process_data_response(connector_data_t * const connector_ptr, connector_sm_session_t * const session, void * const payload, size_t const bytes)
+{
+    connector_status_t status = connector_working;
+    connector_callback_status_t callback_status;
+    connector_data_service_send_response_t cb_data;
+    char * const text = payload;
+
+    cb_data.transport = session->transport;
+    cb_data.user_context = session->user.context;
+    if (SmIsError(session->flags))
+    {
+        switch (session->error)
+        {
+            case connector_sm_error_in_request:
+                cb_data.response = connector_data_service_send_response_bad_request;
+                break;
+
+            case connector_sm_error_unavailable:
+                cb_data.response = connector_data_service_send_response_unavailable;
+                break;
+
+            default:
+                cb_data.response = connector_data_service_send_response_cloud_error;
+                break;
+        }
+    }
+    else
+        cb_data.response = connector_data_service_send_response_success;
+
+    cb_data.hint = (bytes > 0) ? text : NULL;
+
+    #if (defined CONNECTOR_DATA_POINTS)
+    if (SmIsDatapoint(session->flags))
+    {
+        callback_status = dp_handle_callback(connector_ptr, connector_request_id_data_service_send_response, &cb_data);
+    }
+    else
+    #endif
+    {
+        connector_request_id_t request_id;
+
+        request_id.data_service_request = connector_request_id_data_service_send_response;
+        callback_status = connector_callback(connector_ptr->callback, connector_class_id_data_service, request_id, &cb_data);
+    }
+ 
+    status = sm_map_callback_status_to_connector_status(callback_status);
+    if (SmIsError(session->flags) && (status != connector_pending))
+    {
+        session->error = connector_sm_error_none;
+        SmClearError(session->flags);
+    }
+
+    return status;
+}
+#endif
+
+static connector_status_t sm_process_reboot(connector_data_t * const connector_ptr)
+{
+    connector_status_t result = connector_abort;
+    connector_request_id_t request_id;
+    connector_callback_status_t callback_status;
+
+    request_id.os_request = connector_request_id_os_reboot;
+    callback_status = connector_callback(connector_ptr->callback, connector_class_id_operating_system, request_id, NULL);
+    /* JIRA IC4C-119 */
+    /* ASSERT(callback_status != connector_callback_unrecognized); */
+    
+    result = sm_map_callback_status_to_connector_status(callback_status);
+
+    return result;
+}
+
+static connector_status_t sm_process_ping_response(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_status_t status;
+    connector_callback_status_t const callback_status = sm_inform_ping_complete(connector_ptr, session);
+
+    status = sm_map_callback_status_to_connector_status(callback_status);
+    if (SmIsError(session->flags) && (status != connector_pending))
+    {
+        session->error = connector_sm_error_none;
+        SmClearError(session->flags);
+    }
+    return status;
+}
+
+static connector_status_t sm_process_ping_request(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_status_t status;
+    connector_request_id_t request_id;
+    connector_sm_receive_ping_request_t cb_data;
+    connector_callback_status_t callback_status;
+
+    cb_data.transport = session->transport;
+    cb_data.response_required = SmIsResponseNeeded(session->flags);
+
+    request_id.sm_request = connector_request_id_sm_ping_request;
+    callback_status = connector_callback(connector_ptr->callback, connector_class_id_short_message, request_id, &cb_data);
+    if (callback_status == connector_callback_unrecognized)
+        callback_status = connector_callback_continue;
+    status = sm_map_callback_status_to_connector_status(callback_status);
+
+    return status;
+}
+
+static connector_status_t sm_process_opaque_response(connector_data_t * const connector_ptr, connector_sm_session_t * const session, void * payload, size_t const bytes)
+{
+    connector_status_t status;
+    connector_request_id_t request_id;
+    connector_sm_opaque_response_t cb_data;
+    connector_callback_status_t callback_status;
+
+    cb_data.transport = session->transport;
+    cb_data.id = session->request_id;
+    cb_data.data = payload;
+    cb_data.bytes_used = bytes;
+    cb_data.error = SmIsError(session->flags);
+
+    request_id.sm_request = connector_request_id_sm_opaque_response;
+    callback_status = connector_callback(connector_ptr->callback, connector_class_id_short_message, request_id, &cb_data);
+    status = sm_map_callback_status_to_connector_status(callback_status);
+
+    return status;
+}
+
+static connector_status_t sm_prepare_payload(connector_data_t * const connector_ptr, connector_sm_session_t * const session)
+{
+    connector_status_t result = connector_abort;
+    connector_status_t (* prepare_fn) (connector_data_t * const connector_ptr, connector_sm_session_t * const session) = NULL;
+
+    ASSERT_GOTO(session != NULL, error);
+    switch (session->command)
+    {
+        case connector_sm_cmd_data:
+        case connector_sm_cmd_no_path_data:
+            prepare_fn = SmIsClientOwned(session->flags) ? sm_prepare_data_request : sm_prepare_data_response;
+            break;
+
+        #if (defined CONNECTOR_SM_CLI)
+        case connector_sm_cmd_cli:
+            ASSERT_GOTO(SmIsCloudOwned(session->flags), error);
+            prepare_fn = sm_prepare_cli_response;
+            break;
+        #endif
+
+        default:
+            result = connector_unavailable;
+            goto unexpected;
+    }
+
+    result = prepare_fn(connector_ptr, session);
+
+unexpected:
+    if ((result == connector_working) && (session->error != connector_sm_error_none) && (session->error != connector_sm_error_complete))
+    {
+        session->sm_state = connector_sm_state_error;
+        SmSetError(session->flags);
+    }
+
+error:
+    return result;
+}
+
+static connector_status_t sm_pass_user_data(connector_data_t * const connector_ptr, connector_sm_session_t * const session, uint8_t * payload, size_t const bytes)
+{
+    connector_status_t result = connector_abort;
+    connector_sm_state_t next_state = connector_sm_state_send_data;
+
+    switch (session->command)
+    {
+        case connector_sm_cmd_data:
+        case connector_sm_cmd_no_path_data:
+            if (SmIsCloudOwned(session->flags))
+            {
+#if (defined CONNECTOR_DATA_SERVICE)
+                result = sm_process_data_request(connector_ptr, session, payload, bytes);
+#endif
+                next_state = connector_sm_state_get_total_length;
+            }
+            else
+            {
+#if (defined CONNECTOR_DATA_SERVICE)
+                result = sm_process_data_response(connector_ptr, session, payload, bytes);
+#endif
+                next_state = connector_sm_state_complete;
+            }
+            break;
+
+        #if (defined CONNECTOR_SM_CLI)
+        case connector_sm_cmd_cli:
+            result = sm_process_cli_request(connector_ptr, session, payload, bytes);
+            next_state = connector_sm_state_get_total_length;
+            break;
+        #endif
+
+        #if (defined CONNECTOR_TRANSPORT_SMS)
+        case connector_sm_cmd_config:
+            if (SmIsCloudOwned(session->flags))
+            {
+                result = sm_process_config_request(connector_ptr, session, payload, bytes);
+            }
+            break;
+        #endif
+
+        case connector_sm_cmd_connect:
+            #if (defined CONNECTOR_TRANSPORT_TCP)
+            if (edp_get_active_state(connector_ptr) == connector_transport_idle)
+                edp_set_active_state(connector_ptr, connector_transport_open);
+            result = connector_working;
+            #else
+            connector_debug_printf("WARNING: received a 'request connect' but TCP transport is not available\n");
+            result = connector_device_error;
+            #endif
+            break;
+
+        case connector_sm_cmd_ping:
+            if (SmIsCloudOwned(session->flags))
+            {
+                result = sm_process_ping_request(connector_ptr, session);
+            }
+            else
+            {
+                result = sm_process_ping_response(connector_ptr, session);
+                next_state = connector_sm_state_complete;
+            }
+            break;
+
+        case connector_sm_cmd_reboot:
+            SmSetReboot(session->flags);
+            result = connector_working;
+            break;
+
+        case connector_sm_cmd_opaque_response:
+            result = sm_process_opaque_response(connector_ptr, session, payload, bytes);
+            break;
+
+        default:
+            result = connector_unavailable;
+            break;
+    }
+
+    switch (result)
+    {
+        case connector_working:
+            session->bytes_processed += bytes;
+            switch (session->error)
+            {
+                case connector_sm_error_none:
+                case connector_sm_error_complete:
+                    if (SmIsLastData(session->flags))
+                        sm_switch_path(connector_ptr, session, next_state);
+                    break;
+
+                default:
+                    session->sm_state = connector_sm_state_error;
+                    SmSetError(session->flags);
+                    break;
+            }
+            break;
+
+        case connector_pending:
+            break;
+
+        case connector_device_error:
+            session->error = connector_sm_error_cancel;
+            session->sm_state = connector_sm_state_error;
+            SmSetError(session->flags);
+            result = connector_working;
+            break;
+
+        default:
+            session->sm_state = connector_sm_state_error;
+            SmSetError(session->flags);
+            break;
+    }
+
+    return result;
+}
+
+static connector_status_t sm_process_payload(connector_data_t * const connector_ptr, connector_sm_data_t * const sm_ptr, connector_sm_session_t * const session)
+{
+    connector_status_t result = connector_abort;
+    uint8_t * data_ptr;
+    size_t bytes;
+
+#if (defined CONNECTOR_SM_MULTIPART)
+    if (SmIsMultiPart(session->flags))
+    {
+        size_t const max_payload_bytes = sm_get_max_payload_bytes(sm_ptr);
+        size_t const data_index = session->segments.processed * max_payload_bytes;
+
+        ASSERT_GOTO(session->in.data != NULL, error);
+        ASSERT_GOTO(session->segments.processed < session->segments.count, error);
+        if (session->segments.processed == (session->segments.count - 1))
+            SmSetLastData(session->flags);
+
+        data_ptr = &session->in.data[data_index];
+        bytes = session->segments.size_array[session->segments.processed];
+    }
+    else
+#endif
+    {
+        UNUSED_PARAMETER(sm_ptr);
+        ASSERT_GOTO(SmIsNotMultiPart(session->flags), error);
+        SmSetLastData(session->flags);
+        data_ptr = session->in.data;
+        bytes = session->in.bytes;
+    }
+
+    result = sm_pass_user_data(connector_ptr, session, data_ptr, bytes);
+    if ((result == connector_working) && (SmIsNotLastData(session->flags)))
+        session->segments.processed++;
+
+error:
+    return result;
+}
+