Sog Yang / Mbed OS NNN50_BLEWIFISensor

BLE-WiFi with BIOSensors

Dependencies:   AS7000 BNO055 NNN50_WIFI_API

DELTA NNN50 (Bluetooth LE 4.X & 802.11 b/g/n) with Bio Sensor (HRM, 9DoF motion Sensor) reference design.

Env. Setup step by step.

  1. Download or build a TCP Server on you host computer
    1. Please find out the TCP server code or install TCP server application in your host computer.
  2. Import this sample application and setup these information about AP & TCP Server
    1. *char* AP_SSID = "SOG";
    2. *char* AP_PWD = "1122334455667788";
    3. *char* TCP_SERVER_ADDRESS = "10.0.1.13";
    4. *int TCP_SERVER_PORT = 1030;
  3. Compiler your code and download to your mBed device.
  4. Control your mBed device
    1. Please use NORDSemi nRF Tool and setup and watch these information: GATT CMD: 0x00 (connect to AP, TCP Server, and create TCP socket), 0x02 disconnection TCP server, close socket, and WiFi sleep), 0xA1 (send sensor data to tcp server from out_buffer[]) and Status will be update by Bluetooth LE adv through manufacturing information
0x000x020xA1
WiFi,AP&TCP Server connectWiFi,AP, & TCP Server disconnectSend sensor data to TCP Server

DOORService.h

Committer:
sog_yang
Date:
2017-05-02
Revision:
5:ffe1a4c4881e

File content as of revision 5:ffe1a4c4881e:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef __BLE_DOOR_SERVICE_H__
#define __BLE_DOOR_SERVICE_H__

class DOORService {
public:
    const static uint16_t DOOR_SERVICE_UUID              = 0xA000;
    const static uint16_t DOOR_STATE_CHARACTERISTIC_UUID = 0xA001 ;

    DOORService(BLEDevice &_ble, uint8_t initialValueForDOORCharacteristic): 
        ble(_ble), doorState(DOOR_STATE_CHARACTERISTIC_UUID, &initialValueForDOORCharacteristic)
    {
        GattCharacteristic *charTable[] = {&doorState};
        GattService         doorCTL_Service(DOOR_SERVICE_UUID, charTable, sizeof(charTable) / sizeof(GattCharacteristic *));
        ble.addService(doorCTL_Service);
    }

    GattAttribute::Handle_t getValueHandle() const {
        return doorState.getValueHandle();
    }

private:
    BLEDevice                         &ble;
    ReadWriteGattCharacteristic<uint8_t>  doorState;
};

#endif /* #ifndef __BLE_LED_SERVICE_H__ */