![](/media/cache/profiles/ce5140df15d046a66883807d18d0264b.50x50_q85.jpg)
Now supports DS18B20 and DS18S20 Maxim/Dallas one-wire thermometer devices. Also supports DS18S20 in 9, 10, 11, and 12 bit resolution modes. 'Use Address' mode now checks if the correct device type is present, and informs the user which device to use. Correct temperature conversion times now used in non-parasitic mode. The device should be placed at least 6 inches (15 cm) from the mbed board in order to accurately read ambient temperature.
Diff: DebugTrace.cpp
- Revision:
- 0:01a6a40578c9
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DebugTrace.cpp Sun Jan 03 11:57:31 2010 +0000 @@ -0,0 +1,143 @@ +/* +* DebugTrace. Allows dumping debug messages/values to serial or +* to file. +* +* Copyright (C) <2009> Petras Saduikis <petras@petras.co.uk> +* +* This file is part of DebugTrace. +* +* DebugTrace is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 3 of the License, or +* (at your option) any later version. +* +* DebugTrace is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with DebugTrace. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "DebugTrace.h" +#include <mbed.h> +#include <stdarg.h> +#include <string.h> + +Serial logSerial(USBTX, USBRX); +LocalFileSystem local("local"); + +const char* FILE_PATH = "/local/"; +const char* EXTN = ".bak"; + +DebugTrace::DebugTrace(eLog on, eLogTarget mode, const char* fileName, int maxSize) : + enabled(on), logMode(mode), maxFileSize(maxSize), currentFileSize(0), + logFileStatus(0) +{ + // allocate memory for file name strings + int str_size = (strlen(fileName) + strlen(FILE_PATH) + strlen(EXTN) + 1) * sizeof(char); + logFile = (char*)malloc(str_size); + logFileBackup = (char*)malloc(str_size); + + // add path to log file name + strcpy(logFile, FILE_PATH); + strcat(logFile, fileName); + + // create backup file name + strcpy(logFileBackup, logFile); + strcpy(logFileBackup, strtok(logFileBackup, ".")); + strcat(logFileBackup, EXTN); +} + +DebugTrace::~DebugTrace() +{ + // dust to dust, ashes to ashes + if (logFile != NULL) free(logFile); + if (logFileBackup != NULL) free(logFileBackup); +} + +void DebugTrace::clear() +{ + // don't care about whether these fail + remove(logFile); + remove(logFileBackup); +} + +void DebugTrace::backupLog() +{ + // delete previous backup file + if (remove(logFileBackup)) + { + // standard copy stuff + char ch; + FILE* to = fopen(logFileBackup, "wb"); + if (NULL != to) + { + FILE* from = fopen(logFile, "rb"); + if (NULL != from) + { + while(!feof(from)) + { + ch = fgetc(from); + if (ferror(from)) break; + + if(!feof(from)) fputc(ch, to); + if (ferror(to)) break; + } + } + + if (NULL != from) fclose(from); + if (NULL != to) fclose(to); + } + } + + // now delete the log file, so we are ready to start again + // even if backup creation failed - the show must go on! + logFileStatus = remove(logFile); +} + +void DebugTrace::traceOut(const char* fmt, ...) +{ + if (enabled) + { + va_list ap; // argument list pointer + va_start(ap, fmt); + + if (TO_SERIAL == logMode) + { + vfprintf(logSerial, fmt, ap); + } + else // TO_FILE + { + if (0 == logFileStatus) // otherwise we failed to remove a full log file + { + // Write data to file. Note the file size may go over limit + // as we check total size afterwards, using the size written to file. + // This is not a big issue, as this mechanism is only here + // to stop the file growing unchecked. Just remember log file sizes may + // be some what over (as apposed to some what under), so don't push it + // with the max file size. + FILE* fp = fopen(logFile, "a"); + if (NULL == fp) + { + va_end(ap); + return; + } + int size_written = vfprintf(fp, fmt, ap); + fclose(fp); + + // check if we are over the max file size + // if so backup file and start again + currentFileSize += size_written; + if (currentFileSize >= maxFileSize) + { + backupLog(); + currentFileSize = 0; + } + } + } + + va_end(ap); + } +}