Diff: Protocols/PAR16.cpp

Revision:

4:12ba0ecc2c1f

Child:

5:b222a9461d6b

diff -r 48f3282c2be8 -r 12ba0ecc2c1f Protocols/PAR16.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Protocols/PAR16.cpp	Sun Feb 15 20:06:07 2015 +0000
@@ -0,0 +1,172 @@
+ /* mbed UniGraphic library - PAR16 protocol class
+ * Copyright (c) 2015 Giuliano Dianda
+ * Released under the MIT License: http://mbed.org/license/mit
+ *
+ * Derived work of:
+ *
+ * mbed library for 240*320 pixel display TFT based on ILI9341 LCD Controller
+ * Copyright (c) 2013 Peter Drescher - DC2PD
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "PAR16.h"
+
+PAR16::PAR16(PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD)
+    : _port(port,0xFFFF), _CS(CS), _reset(reset), _DC(DC), _WR(WR), _RD(RD)
+{
+    _reset = 1;
+    _DC=1;
+    _WR=1;
+    _RD=1;
+    _CS=1;
+#ifdef STMPORTDEBUG
+    findport(port); //on return, GPIO get disabled
+#endif
+    _port.mode(PullNone);
+    _port.output(); // will re-enable our GPIO port
+    hw_reset();    
+}
+
+#ifdef STMPORTDEBUG
+// create a port obj with STM HAL drivers, just to collect memorymapped regs
+void PAR16::findport(PortName port)
+{
+    port_t tempport;
+    port_init(&tempport, port, 0xFF, PIN_INPUT);
+    outreg = tempport.reg_out;
+    inreg = tempport.reg_in;
+ //   debug("out 0x%.8X  in 0x%.8X\r\n", outreg, inreg);
+}
+#endif
+void PAR16::wr_cmd8(unsigned char cmd)
+{   
+#ifdef USE_CS
+    _CS = 0;
+#endif    
+    _DC = 0; // 0=cmd
+    _port.write(cmd);      // write 8bit
+    _WR=0;
+    _WR=1;
+#ifdef USE_CS
+    _CS = 1;
+#endif
+}
+void PAR16::wr_data8(unsigned char data)
+{
+#ifdef USE_CS
+    _CS = 0;
+#endif
+    _DC = 1; // 1=data
+    _port.write(data);    // write 8bit
+    _WR=0;
+    _WR=1;
+#ifdef USE_CS
+    _CS = 1;
+#endif
+}
+void PAR16::wr_cmd16(unsigned short cmd)
+{   
+#ifdef USE_CS
+    _CS = 0;
+#endif    
+    _DC = 0; // 0=cmd
+    _port.write(cmd>>8);      // write 8bit
+    _WR=0;
+    _WR=1;
+    _port.write(cmd&0xFF);      // write 8bit
+    _WR=0;
+    _WR=1;
+#ifdef USE_CS
+    _CS = 1;
+#endif
+}
+void PAR16::wr_data16(unsigned short data)
+{
+#ifdef USE_CS
+    _CS = 0;
+#endif
+    _DC = 1; // 1=data
+    _port.write(data>>8);    // write 8bit
+    _WR=0;
+    _WR=1;
+    _port.write(data&0xFF);    // write 8bit
+    _WR=0;
+    _WR=1;
+#ifdef USE_CS
+    _CS = 1;
+#endif
+}
+void PAR16::wr_gram(unsigned short data)
+{
+#ifdef USE_CS
+    _CS = 0;
+#endif
+    _DC = 1; // 1=data
+    _port.write(data);    // write 16bit
+    _WR=0;
+    _WR=1;
+#ifdef USE_CS
+    _CS = 1;
+#endif
+}
+void PAR16::wr_gram(unsigned short data, unsigned int count)
+{
+#ifdef USE_CS
+    _CS = 0;
+#endif
+    _DC = 1; // 1=data
+    while(count)
+    {
+        _port.write(data);    // write 16bit
+        _WR=0;
+        _WR=1;
+        count--;
+    }
+#ifdef USE_CS
+    _CS = 1;
+#endif
+}
+void PAR16::wr_grambuf(unsigned short* data, unsigned int lenght)
+{
+#ifdef USE_CS
+    _CS = 0;
+#endif
+    _DC = 1; // 1=data
+    while(lenght)
+    {
+        _port.write(*data);    // write 16bit
+        _WR=0;
+        _WR=1;
+        data++;
+        lenght--;
+    }
+#ifdef USE_CS
+    _CS = 1;
+#endif
+}
+
+void PAR16::hw_reset()
+{
+    wait_ms(15);
+    _DC = 1;
+    _CS = 1;
+    _WR = 1;
+    _RD = 1;
+    _reset = 0;                        // display reset
+    wait_us(50);
+    _reset = 1;                       // end reset
+    wait_ms(15);
+#ifndef USE_CS
+    _CS=0;      // put CS low now and forever
+#endif
+}
+void PAR16::BusEnable(bool enable)
+{
+    _CS = enable ? 0:1;
+}
\ No newline at end of file