.
Protocols/PAR8.h
- Committer:
- Geremia
- Date:
- 2015-02-17
- Revision:
- 7:bb0383b91104
- Parent:
- 6:8356d48a07db
- Child:
- 11:b842b8e332cb
File content as of revision 7:bb0383b91104:
#ifndef PAR8_H #define PAR8_H #include "mbed.h" #include "Protocols.h" //#include "GraphicsDisplay.h" /** Parallel 8bit interface */ class PAR8 : public Protocols { public: /** Create a PAR8 display interface with a GPIO port and 5 control pins * * @param port GPIO port to use * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display */ PAR8(PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD); protected: /** Send 8bit command to display controller * * @param cmd: byte to send * */ virtual void wr_cmd8(unsigned char cmd); /** Send 8bit data to display controller * * @param data: byte to send * */ virtual void wr_data8(unsigned char data); /** Send 2x8bit command to display controller * * @param cmd: halfword to send * */ virtual void wr_cmd16(unsigned short cmd); /** Send 2x8bit data to display controller * * @param data: halfword to send * */ virtual void wr_data16(unsigned short data); /** Send 16bit pixeldata to display controller * * @param data: halfword to send * */ virtual void wr_gram(unsigned short data); /** Send same 16bit pixeldata to display controller multiple times * * @param data: halfword to send * @param count: how many * */ virtual void wr_gram(unsigned short data, unsigned int count); /** Send array of pixeldata shorts to display controller * * @param data: unsigned short pixeldata array * @param lenght: lenght (in shorts) * */ virtual void wr_grambuf(unsigned short* data, unsigned int lenght); /** Read 16bit pixeldata from display controller (with dummy cycle) * * @returns 16bit color */ virtual unsigned short rd_gram(); /** Read 4x8bit register data (with dummy cycle) * @param reg the register to read * @returns data as uint * */ virtual unsigned int rd_reg_data32(unsigned char reg); /** Read 3x8bit ExtendedCommands register data * @param reg the register to read * @returns data as uint * @note EXTC regs (0xB0 to 0xFF) are read/write registers, for Parallel mode directly accessible in both directions */ virtual unsigned int rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd); /** HW reset sequence (without display init commands) */ virtual void hw_reset(); /** Set ChipSelect high or low * @param enable 0/1 */ virtual void BusEnable(bool enable); private: PortInOut _port; DigitalOut _CS; DigitalOut _reset; DigitalOut _DC; DigitalOut _WR; DigitalOut _RD; }; #endif