Diff: UTouchCD.h

Revision:

0:a275ef704eb8

Child:

1:88d79fcedec7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UTouchCD.h	Mon Jan 11 09:35:33 2016 +0000
@@ -0,0 +1,43 @@
+// UTouchCD.h
+// ----------
+//
+// Since there are slight deviations in all touch screens you should run a
+// calibration on your display module. Run the UTouch_Calibration sketch
+// that came with this library and follow the on-screen instructions to
+// update this file.
+//
+// Remember that is you have multiple display modules they will probably 
+// require different calibration data so you should run the calibration
+// every time you switch to another module.
+// You can, of course, store calibration data for all your modules here
+// and comment out the ones you dont need at the moment.
+//
+
+// These calibration settings works with my ITDB02-3.2S.
+// They MIGHT work on your 320x240 display module, but you should run the
+// calibration sketch anyway. If you are using a display with any other
+// resolution you MUST calibrate it as these settings WILL NOT work.
+//#define CAL_X 0x00378F66UL
+//#define CAL_Y 0x03C34155UL
+//#define CAL_S 0x000EF13FUL
+
+//#define CAL_X 0x001DC771UL
+//#define CAL_Y 0x01E200A6UL
+//#define CAL_S 0x000EF13FUL
+
+#ifndef UTouchCD_h
+#define UTouchCD_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define CAL_X   0x003B8EE2UL
+#define CAL_Y   0x03C4014CUL
+#define CAL_S   0x000EF13FUL
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
\ No newline at end of file