Diff: main.cpp

Revision:

0:d02fb9a8c1ae

diff -r 000000000000 -r d02fb9a8c1ae main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu Oct 16 09:36:53 2014 +0000
@@ -0,0 +1,143 @@
+//w5100
+#include "main.h"
+
+//Serial pc(USBTX, USBRX); // tx, rx 
+void baud (int baudrate = 115200);
+
+char wartosc[20];
+float temperatura;
+ 
+int x; 
+
+//******************
+
+void f_ethernet_init(void);
+
+const char * IP_Addr    = "10.192.144.204";
+const char * IP_Subnet  = "255.255.252.0";
+const char * IP_Gateway = "10.192.147.254";
+
+
+
+int ret,dummy;
+int lv=1;
+bool status;
+
+int sw11;
+int sw33;
+
+
+
+
+
+//================= main =======================================================================
+
+int main()
+{       
+        pc.baud(BAUD); 
+        f_ethernet_init();
+        TCPSocketServer server;
+        TCPSocketConnection client;
+        server.bind(ECHO_SERVER_PORT);
+        server.listen();
+
+
+              
+        odczyt_z_SD(client, 2); //2 wyslij na com zawartosc karty SD          
+        temperatura_f(); 
+        pc.printf("\nEsperando conexion con cliente...\n");
+        
+    while(lv)
+          {
+             lv=server.accept(client);
+             if(!lv)
+                 {
+                     pc.printf("Cliente conectado: %s\n", client.get_address());          
+                  }
+            else
+                 {
+                  wait(1);
+                  }
+            }   
+           client.receive(data,sizeof(data));           
+          // pc.printf("Adres: %c",data);
+           
+                  
+    while(1)       
+        {   
+            sw11=myled;
+            sw33=myled2;
+            probe[0]->convertTemperature(true, DS1820::all_devices);  
+            slcd.Home(); 
+            slcd.printf("%3.1f",probe[0]->temperature());  
+            pc.printf("\n\rTemperatura: %3.2f\r\n",probe[0]->temperature() );            
+            
+            data_all[0]=0;
+            while(1)
+            {
+                data_rozmiar2=client.receive(data_all,data_rozmiar);
+                pc.printf("\n\r Zmienna\n\r %s",data_all);  // wysyła dane na com
+               
+                if (data_rozmiar2<data_rozmiar)
+                { 
+                data_all[data_rozmiar2]=0;
+                 break;
+                 }
+            } 
+            diody(); // funkcja do sterowania diodami
+           
+           //fotka(client,1); // wczytuje zdjecie i wysyła na ETH, na końcu czyszci tablice
+                    
+                client.send(a,sizeof(a)); //nagłowek htm
+                client.send(b,sizeof(b));
+                sprintf(paq_en,"<center><table border=10><tr><td><h1>%3.2f oC</h1></td></tr></table></center>",probe[0]->temperature());
+                client.send(paq_en,sizeof(paq_en));
+                sprintf(paq_en,"<center><table border=10><tr><td><h1>P1:[%d]____P2:[%i]</h1></td></tr></table></center>",sw33,sw11);
+                client.send(paq_en,sizeof(paq_en));  
+                         
+                odczyt_z_SD(client, 1);  //1 wysyła na ETH, 2 wysyła na COM, 3 wysyła na ETH i COM
+                client.send(t,sizeof(t)); 
+                          
+                client.Socket::~Socket();  
+                server.bind(ECHO_SERVER_PORT);
+                server.listen();
+                server.accept(client);         
+        }         
+}  
+
+ 
+
+void f_ethernet_init()
+{
+     uint8_t mac[]={0x00,0x08,0x0C,0x1C,0xAA,0xCA};
+   // mbed_mac_address((char *)mac); 
+    pc.printf("\tIniciando Servidor Ethernet...\n\r");
+    wait(1);
+    ret = eth.init(mac, IP_Addr, IP_Subnet, IP_Gateway);
+    if(!ret)
+    {
+        pc.printf("Inicializado, MAC= %s\n\r",eth.getMACAddress());
+    }    
+    else
+    {
+        pc.printf("Fallo comunicacion... Reinicie dispositivos...\n\r");    
+    }
+    pc.printf("Conectando.");
+    wait(0.5);
+    pc.printf(".");
+    wait(0.5);
+    pc.printf(".\n\r");
+    wait(0.5);
+    ret = eth.connect();
+    if(!ret)
+    {
+        pc.printf("Conexion Establecida!\n\n\r");
+        wait(1);
+        pc.printf("IP=%s\n\rMASK=%s\n\rGW=%s\n\r",eth.getIPAddress(), eth.getNetworkMask(), eth.getGateway());
+    }    
+    else
+    {
+        pc.printf("Fallo conexion... Reinicie dispositivos...\n\r"); 
+    }
+}  
+ 
\ No newline at end of file