BLE UART example

Fork of Nucleo_BLE_BlueNRG by ST Americas mbed Team

Revision:
0:a948f5f3904c
Child:
3:104f1bba39ca
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/utils/inc/Utils.h	Fri Dec 19 18:56:07 2014 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+* Copyright (c) 2006-2013 ARM Limited
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+
+#include "hal_types.h"
+#include "mbed.h"
+
+// utility functions
+
+#ifndef __UTIL_H__
+#define __UTIL_H__
+
+#define NEED_CONSOLE_OUTPUT 1 /* Set this if you need debug messages on the console;
+                            * it will have an impact on code-size and power consumption. */
+
+#if NEED_CONSOLE_OUTPUT
+//Serial usb(USBTX, USBRX); // tx, rx
+extern Serial  pc;
+#define DEBUG(...) { pc.printf(__VA_ARGS__); }
+#else
+#define DEBUG(...) /* nothing */
+#endif /* #if NEED_CONSOLE_OUTPUT */
+
+#define STORE_LE_16(buf, val)    ( ((buf)[0] =  (tHalUint8) (val)    ) , \
+    ((buf)[1] =  (tHalUint8) (val>>8) ) )
+
+#define STORE_LE_32(buf, val)    ( ((buf)[0] =  (tHalUint8) (val)     ) , \
+    ((buf)[1] =  (tHalUint8) (val>>8)  ) , \
+    ((buf)[2] =  (tHalUint8) (val>>16) ) , \
+    ((buf)[3] =  (tHalUint8) (val>>24) ) ) 
+
+#define COPY_UUID_128(uuid_struct, uuid_15, uuid_14, uuid_13, uuid_12, uuid_11, uuid_10, uuid_9, uuid_8, uuid_7, uuid_6, uuid_5, uuid_4, uuid_3, uuid_2, uuid_1, uuid_0) \
+    do {\
+        uuid_struct[0] = uuid_0; uuid_struct[1] = uuid_1; uuid_struct[2] = uuid_2; uuid_struct[3] = uuid_3; \
+        uuid_struct[4] = uuid_4; uuid_struct[5] = uuid_5; uuid_struct[6] = uuid_6; uuid_struct[7] = uuid_7; \
+        uuid_struct[8] = uuid_8; uuid_struct[9] = uuid_9; uuid_struct[10] = uuid_10; uuid_struct[11] = uuid_11; \
+        uuid_struct[12] = uuid_12; uuid_struct[13] = uuid_13; uuid_struct[14] = uuid_14; uuid_struct[15] = uuid_15; \
+    }while(0)
+
+
+double getHighPowerAndPALevelValue(int8_t dBMLevel, int8_t& EN_HIGH_POWER, int8_t& PA_LEVEL);
+
+#endif // __UTIL_H__
\ No newline at end of file