siva surendar / mbed-dev

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of mbed-dev by mbed official

targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_hal_conf.h@144:ef7eb2e8f9f7, 2016-09-02 (annotated)

Committer:
<>
Date:
Fri Sep 02 15:07:44 2016 +0100
Revision:
144:ef7eb2e8f9f7
Parent:
124:6a4a5b7d7324 
This updates the lib to the mbed lib v125

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /**
<> 144:ef7eb2e8f9f7 2 ******************************************************************************
<> 144:ef7eb2e8f9f7 3 * @file stm32f1xx_hal_conf.h
<> 144:ef7eb2e8f9f7 4 * @author MCD Application Team
<> 144:ef7eb2e8f9f7 5 * @version V1.0.4
<> 144:ef7eb2e8f9f7 6 * @date 29-April-2016
<> 144:ef7eb2e8f9f7 7 * @brief HAL configuration template file.
<> 144:ef7eb2e8f9f7 8 * This file should be copied to the application folder and renamed
<> 144:ef7eb2e8f9f7 9 * to stm32f1xx_hal_conf.h.
<> 144:ef7eb2e8f9f7 10 ******************************************************************************
<> 144:ef7eb2e8f9f7 11 * @attention
<> 144:ef7eb2e8f9f7 12 *
<> 144:ef7eb2e8f9f7 13 * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
<> 144:ef7eb2e8f9f7 14 *
<> 144:ef7eb2e8f9f7 15 * Redistribution and use in source and binary forms, with or without modification,
<> 144:ef7eb2e8f9f7 16 * are permitted provided that the following conditions are met:
<> 144:ef7eb2e8f9f7 17 * 1. Redistributions of source code must retain the above copyright notice,
<> 144:ef7eb2e8f9f7 18 * this list of conditions and the following disclaimer.
<> 144:ef7eb2e8f9f7 19 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 144:ef7eb2e8f9f7 20 * this list of conditions and the following disclaimer in the documentation
<> 144:ef7eb2e8f9f7 21 * and/or other materials provided with the distribution.
<> 144:ef7eb2e8f9f7 22 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 144:ef7eb2e8f9f7 23 * may be used to endorse or promote products derived from this software
<> 144:ef7eb2e8f9f7 24 * without specific prior written permission.
<> 144:ef7eb2e8f9f7 25 *
<> 144:ef7eb2e8f9f7 26 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 144:ef7eb2e8f9f7 27 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 144:ef7eb2e8f9f7 28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 144:ef7eb2e8f9f7 29 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 144:ef7eb2e8f9f7 30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 144:ef7eb2e8f9f7 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 144:ef7eb2e8f9f7 32 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 144:ef7eb2e8f9f7 33 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 144:ef7eb2e8f9f7 34 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 144:ef7eb2e8f9f7 35 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 144:ef7eb2e8f9f7 36 *
<> 144:ef7eb2e8f9f7 37 ******************************************************************************
<> 144:ef7eb2e8f9f7 38 */
<> 144:ef7eb2e8f9f7 39
<> 144:ef7eb2e8f9f7 40 /* Define to prevent recursive inclusion -------------------------------------*/
<> 144:ef7eb2e8f9f7 41 #ifndef __STM32F1xx_HAL_CONF_H
<> 144:ef7eb2e8f9f7 42 #define __STM32F1xx_HAL_CONF_H
<> 144:ef7eb2e8f9f7 43
<> 144:ef7eb2e8f9f7 44 #ifdef __cplusplus
<> 144:ef7eb2e8f9f7 45 extern "C" {
<> 144:ef7eb2e8f9f7 46 #endif
<> 144:ef7eb2e8f9f7 47
<> 144:ef7eb2e8f9f7 48 /* Exported types ------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 49 /* Exported constants --------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 50
<> 144:ef7eb2e8f9f7 51 /* ########################## Module Selection ############################## */
<> 144:ef7eb2e8f9f7 52 /**
<> 144:ef7eb2e8f9f7 53 * @brief This is the list of modules to be used in the HAL driver
<> 144:ef7eb2e8f9f7 54 */
<> 144:ef7eb2e8f9f7 55 #define HAL_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 56 #define HAL_ADC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 57 #define HAL_CAN_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 58 #define HAL_CEC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 59 #define HAL_CORTEX_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 60 #define HAL_CRC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 61 #define HAL_DAC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 62 #define HAL_DMA_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 63 #define HAL_ETH_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 64 #define HAL_FLASH_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 65 #define HAL_GPIO_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 66 #define HAL_HCD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 67 #define HAL_I2C_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 68 #define HAL_I2S_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 69 #define HAL_IRDA_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 70 #define HAL_IWDG_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 71 #define HAL_NAND_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 72 #define HAL_NOR_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 73 #define HAL_PCCARD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 74 #define HAL_PCD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 75 #define HAL_PWR_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 76 #define HAL_RCC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 77 #define HAL_RTC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 78 #define HAL_SD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 79 #define HAL_SMARTCARD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 80 #define HAL_SPI_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 81 #define HAL_SRAM_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 82 #define HAL_TIM_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 83 #define HAL_UART_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 84 #define HAL_USART_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 85 #define HAL_WWDG_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 86
<> 144:ef7eb2e8f9f7 87 /* ########################## Oscillator Values adaptation ####################*/
<> 144:ef7eb2e8f9f7 88 /**
<> 144:ef7eb2e8f9f7 89 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
<> 144:ef7eb2e8f9f7 90 * This value is used by the RCC HAL module to compute the system frequency
<> 144:ef7eb2e8f9f7 91 * (when HSE is used as system clock source, directly or through the PLL).
<> 144:ef7eb2e8f9f7 92 */
<> 144:ef7eb2e8f9f7 93 #if !defined (HSE_VALUE)
<> 144:ef7eb2e8f9f7 94 #if defined(USE_STM3210C_EVAL)
<> 144:ef7eb2e8f9f7 95 #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
<> 144:ef7eb2e8f9f7 96 #else
<> 144:ef7eb2e8f9f7 97 #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
<> 144:ef7eb2e8f9f7 98 #endif
<> 144:ef7eb2e8f9f7 99 #endif /* HSE_VALUE */
<> 144:ef7eb2e8f9f7 100
<> 144:ef7eb2e8f9f7 101 #if !defined (HSE_STARTUP_TIMEOUT)
<> 144:ef7eb2e8f9f7 102 #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
<> 144:ef7eb2e8f9f7 103 #endif /* HSE_STARTUP_TIMEOUT */
<> 144:ef7eb2e8f9f7 104
<> 144:ef7eb2e8f9f7 105 /**
<> 144:ef7eb2e8f9f7 106 * @brief Internal High Speed oscillator (HSI) value.
<> 144:ef7eb2e8f9f7 107 * This value is used by the RCC HAL module to compute the system frequency
<> 144:ef7eb2e8f9f7 108 * (when HSI is used as system clock source, directly or through the PLL).
<> 144:ef7eb2e8f9f7 109 */
<> 144:ef7eb2e8f9f7 110 #if !defined (HSI_VALUE)
<> 144:ef7eb2e8f9f7 111 #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
<> 144:ef7eb2e8f9f7 112 #endif /* HSI_VALUE */
<> 144:ef7eb2e8f9f7 113
<> 144:ef7eb2e8f9f7 114 /**
<> 144:ef7eb2e8f9f7 115 * @brief External Low Speed oscillator (LSE) value.
<> 144:ef7eb2e8f9f7 116 * This value is used by the UART, RTC HAL module to compute the system frequency
<> 144:ef7eb2e8f9f7 117 */
<> 144:ef7eb2e8f9f7 118 #if !defined (LSE_VALUE)
<> 144:ef7eb2e8f9f7 119 #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
<> 144:ef7eb2e8f9f7 120 #endif /* LSE_VALUE */
<> 144:ef7eb2e8f9f7 121
<> 144:ef7eb2e8f9f7 122
<> 144:ef7eb2e8f9f7 123 #if !defined (LSE_STARTUP_TIMEOUT)
<> 144:ef7eb2e8f9f7 124 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
<> 144:ef7eb2e8f9f7 125 #endif /* HSE_STARTUP_TIMEOUT */
<> 144:ef7eb2e8f9f7 126
<> 144:ef7eb2e8f9f7 127
<> 144:ef7eb2e8f9f7 128 /* Tip: To avoid modifying this file each time you need to use different HSE,
<> 144:ef7eb2e8f9f7 129 === you can define the HSE value in your toolchain compiler preprocessor. */
<> 144:ef7eb2e8f9f7 130
<> 144:ef7eb2e8f9f7 131 /* ########################### System Configuration ######################### */
<> 144:ef7eb2e8f9f7 132 /**
<> 144:ef7eb2e8f9f7 133 * @brief This is the HAL system configuration section
<> 144:ef7eb2e8f9f7 134 */
<> 144:ef7eb2e8f9f7 135 #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
<> 144:ef7eb2e8f9f7 136 #define TICK_INT_PRIORITY ((uint32_t)0x000F) /*!< tick interrupt priority */
<> 144:ef7eb2e8f9f7 137 #define USE_RTOS 0
<> 144:ef7eb2e8f9f7 138 #define PREFETCH_ENABLE 1
<> 144:ef7eb2e8f9f7 139
<> 144:ef7eb2e8f9f7 140 /* ########################## Assert Selection ############################## */
<> 144:ef7eb2e8f9f7 141 /**
<> 144:ef7eb2e8f9f7 142 * @brief Uncomment the line below to expanse the "assert_param" macro in the
<> 144:ef7eb2e8f9f7 143 * HAL drivers code
<> 144:ef7eb2e8f9f7 144 */
<> 144:ef7eb2e8f9f7 145 /*#define USE_FULL_ASSERT 1*/
<> 144:ef7eb2e8f9f7 146
<> 144:ef7eb2e8f9f7 147
<> 144:ef7eb2e8f9f7 148 /* ################## Ethernet peripheral configuration ##################### */
<> 144:ef7eb2e8f9f7 149
<> 144:ef7eb2e8f9f7 150 /* Section 1 : Ethernet peripheral configuration */
<> 144:ef7eb2e8f9f7 151
<> 144:ef7eb2e8f9f7 152 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
<> 144:ef7eb2e8f9f7 153 #define MAC_ADDR0 2
<> 144:ef7eb2e8f9f7 154 #define MAC_ADDR1 0
<> 144:ef7eb2e8f9f7 155 #define MAC_ADDR2 0
<> 144:ef7eb2e8f9f7 156 #define MAC_ADDR3 0
<> 144:ef7eb2e8f9f7 157 #define MAC_ADDR4 0
<> 144:ef7eb2e8f9f7 158 #define MAC_ADDR5 0
<> 144:ef7eb2e8f9f7 159
<> 144:ef7eb2e8f9f7 160 /* Definition of the Ethernet driver buffers size and count */
<> 144:ef7eb2e8f9f7 161 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
<> 144:ef7eb2e8f9f7 162 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
<> 144:ef7eb2e8f9f7 163 #define ETH_RXBUFNB ((uint32_t)8) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
<> 144:ef7eb2e8f9f7 164 #define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
<> 144:ef7eb2e8f9f7 165
<> 144:ef7eb2e8f9f7 166 /* Section 2: PHY configuration section */
<> 144:ef7eb2e8f9f7 167
<> 144:ef7eb2e8f9f7 168 /* DP83848 PHY Address*/
<> 144:ef7eb2e8f9f7 169 #define DP83848_PHY_ADDRESS 0x01
<> 144:ef7eb2e8f9f7 170 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
<> 144:ef7eb2e8f9f7 171 #define PHY_RESET_DELAY ((uint32_t)0x000000FF)
<> 144:ef7eb2e8f9f7 172 /* PHY Configuration delay */
<> 144:ef7eb2e8f9f7 173 #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
<> 144:ef7eb2e8f9f7 174
<> 144:ef7eb2e8f9f7 175 #define PHY_READ_TO ((uint32_t)0x0000FFFF)
<> 144:ef7eb2e8f9f7 176 #define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
<> 144:ef7eb2e8f9f7 177
<> 144:ef7eb2e8f9f7 178 /* Section 3: Common PHY Registers */
<> 144:ef7eb2e8f9f7 179
<> 144:ef7eb2e8f9f7 180 #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
<> 144:ef7eb2e8f9f7 181 #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
<> 144:ef7eb2e8f9f7 182
<> 144:ef7eb2e8f9f7 183 #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
<> 144:ef7eb2e8f9f7 184 #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
<> 144:ef7eb2e8f9f7 185 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
<> 144:ef7eb2e8f9f7 186 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
<> 144:ef7eb2e8f9f7 187 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
<> 144:ef7eb2e8f9f7 188 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
<> 144:ef7eb2e8f9f7 189 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
<> 144:ef7eb2e8f9f7 190 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
<> 144:ef7eb2e8f9f7 191 #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
<> 144:ef7eb2e8f9f7 192 #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
<> 144:ef7eb2e8f9f7 193
<> 144:ef7eb2e8f9f7 194 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
<> 144:ef7eb2e8f9f7 195 #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
<> 144:ef7eb2e8f9f7 196 #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
<> 144:ef7eb2e8f9f7 197
<> 144:ef7eb2e8f9f7 198 /* Section 4: Extended PHY Registers */
<> 144:ef7eb2e8f9f7 199
<> 144:ef7eb2e8f9f7 200 #define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
<> 144:ef7eb2e8f9f7 201 #define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
<> 144:ef7eb2e8f9f7 202 #define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
<> 144:ef7eb2e8f9f7 203
<> 144:ef7eb2e8f9f7 204 #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
<> 144:ef7eb2e8f9f7 205 #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
<> 144:ef7eb2e8f9f7 206 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
<> 144:ef7eb2e8f9f7 207
<> 144:ef7eb2e8f9f7 208 #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
<> 144:ef7eb2e8f9f7 209 #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
<> 144:ef7eb2e8f9f7 210
<> 144:ef7eb2e8f9f7 211 #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
<> 144:ef7eb2e8f9f7 212 #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
<> 144:ef7eb2e8f9f7 213
<> 144:ef7eb2e8f9f7 214
<> 144:ef7eb2e8f9f7 215
<> 144:ef7eb2e8f9f7 216 /* Includes ------------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 217 /**
<> 144:ef7eb2e8f9f7 218 * @brief Include module's header file
<> 144:ef7eb2e8f9f7 219 */
<> 144:ef7eb2e8f9f7 220
<> 144:ef7eb2e8f9f7 221 #ifdef HAL_RCC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 222 #include "stm32f1xx_hal_rcc.h"
<> 144:ef7eb2e8f9f7 223 #endif /* HAL_RCC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 224
<> 144:ef7eb2e8f9f7 225 #ifdef HAL_GPIO_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 226 #include "stm32f1xx_hal_gpio.h"
<> 144:ef7eb2e8f9f7 227 #endif /* HAL_GPIO_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 228
<> 144:ef7eb2e8f9f7 229 #ifdef HAL_DMA_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 230 #include "stm32f1xx_hal_dma.h"
<> 144:ef7eb2e8f9f7 231 #endif /* HAL_DMA_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 232
<> 144:ef7eb2e8f9f7 233 #ifdef HAL_ETH_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 234 #include "stm32f1xx_hal_eth.h"
<> 144:ef7eb2e8f9f7 235 #endif /* HAL_ETH_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 236
<> 144:ef7eb2e8f9f7 237 #ifdef HAL_CAN_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 238 #include "stm32f1xx_hal_can.h"
<> 144:ef7eb2e8f9f7 239 #endif /* HAL_CAN_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 240
<> 144:ef7eb2e8f9f7 241 #ifdef HAL_CEC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 242 #include "stm32f1xx_hal_cec.h"
<> 144:ef7eb2e8f9f7 243 #endif /* HAL_CEC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 244
<> 144:ef7eb2e8f9f7 245 #ifdef HAL_CORTEX_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 246 #include "stm32f1xx_hal_cortex.h"
<> 144:ef7eb2e8f9f7 247 #endif /* HAL_CORTEX_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 248
<> 144:ef7eb2e8f9f7 249 #ifdef HAL_ADC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 250 #include "stm32f1xx_hal_adc.h"
<> 144:ef7eb2e8f9f7 251 #endif /* HAL_ADC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 252
<> 144:ef7eb2e8f9f7 253 #ifdef HAL_CRC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 254 #include "stm32f1xx_hal_crc.h"
<> 144:ef7eb2e8f9f7 255 #endif /* HAL_CRC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 256
<> 144:ef7eb2e8f9f7 257 #ifdef HAL_DAC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 258 #include "stm32f1xx_hal_dac.h"
<> 144:ef7eb2e8f9f7 259 #endif /* HAL_DAC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 260
<> 144:ef7eb2e8f9f7 261 #ifdef HAL_FLASH_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 262 #include "stm32f1xx_hal_flash.h"
<> 144:ef7eb2e8f9f7 263 #endif /* HAL_FLASH_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 264
<> 144:ef7eb2e8f9f7 265 #ifdef HAL_SRAM_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 266 #include "stm32f1xx_hal_sram.h"
<> 144:ef7eb2e8f9f7 267 #endif /* HAL_SRAM_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 268
<> 144:ef7eb2e8f9f7 269 #ifdef HAL_NOR_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 270 #include "stm32f1xx_hal_nor.h"
<> 144:ef7eb2e8f9f7 271 #endif /* HAL_NOR_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 272
<> 144:ef7eb2e8f9f7 273 #ifdef HAL_I2C_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 274 #include "stm32f1xx_hal_i2c.h"
<> 144:ef7eb2e8f9f7 275 #endif /* HAL_I2C_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 276
<> 144:ef7eb2e8f9f7 277 #ifdef HAL_I2S_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 278 #include "stm32f1xx_hal_i2s.h"
<> 144:ef7eb2e8f9f7 279 #endif /* HAL_I2S_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 280
<> 144:ef7eb2e8f9f7 281 #ifdef HAL_IWDG_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 282 #include "stm32f1xx_hal_iwdg.h"
<> 144:ef7eb2e8f9f7 283 #endif /* HAL_IWDG_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 284
<> 144:ef7eb2e8f9f7 285 #ifdef HAL_PWR_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 286 #include "stm32f1xx_hal_pwr.h"
<> 144:ef7eb2e8f9f7 287 #endif /* HAL_PWR_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 288
<> 144:ef7eb2e8f9f7 289 #ifdef HAL_RTC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 290 #include "stm32f1xx_hal_rtc.h"
<> 144:ef7eb2e8f9f7 291 #endif /* HAL_RTC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 292
<> 144:ef7eb2e8f9f7 293 #ifdef HAL_PCCARD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 294 #include "stm32f1xx_hal_pccard.h"
<> 144:ef7eb2e8f9f7 295 #endif /* HAL_PCCARD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 296
<> 144:ef7eb2e8f9f7 297 #ifdef HAL_SD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 298 #include "stm32f1xx_hal_sd.h"
<> 144:ef7eb2e8f9f7 299 #endif /* HAL_SD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 300
<> 144:ef7eb2e8f9f7 301 #ifdef HAL_NAND_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 302 #include "stm32f1xx_hal_nand.h"
<> 144:ef7eb2e8f9f7 303 #endif /* HAL_NAND_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 304
<> 144:ef7eb2e8f9f7 305 #ifdef HAL_SPI_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 306 #include "stm32f1xx_hal_spi.h"
<> 144:ef7eb2e8f9f7 307 #endif /* HAL_SPI_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 308
<> 144:ef7eb2e8f9f7 309 #ifdef HAL_TIM_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 310 #include "stm32f1xx_hal_tim.h"
<> 144:ef7eb2e8f9f7 311 #endif /* HAL_TIM_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 312
<> 144:ef7eb2e8f9f7 313 #ifdef HAL_UART_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 314 #include "stm32f1xx_hal_uart.h"
<> 144:ef7eb2e8f9f7 315 #endif /* HAL_UART_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 316
<> 144:ef7eb2e8f9f7 317 #ifdef HAL_USART_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 318 #include "stm32f1xx_hal_usart.h"
<> 144:ef7eb2e8f9f7 319 #endif /* HAL_USART_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 320
<> 144:ef7eb2e8f9f7 321 #ifdef HAL_IRDA_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 322 #include "stm32f1xx_hal_irda.h"
<> 144:ef7eb2e8f9f7 323 #endif /* HAL_IRDA_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 324
<> 144:ef7eb2e8f9f7 325 #ifdef HAL_SMARTCARD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 326 #include "stm32f1xx_hal_smartcard.h"
<> 144:ef7eb2e8f9f7 327 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 328
<> 144:ef7eb2e8f9f7 329 #ifdef HAL_WWDG_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 330 #include "stm32f1xx_hal_wwdg.h"
<> 144:ef7eb2e8f9f7 331 #endif /* HAL_WWDG_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 332
<> 144:ef7eb2e8f9f7 333 #ifdef HAL_PCD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 334 #include "stm32f1xx_hal_pcd.h"
<> 144:ef7eb2e8f9f7 335 #endif /* HAL_PCD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 336
<> 144:ef7eb2e8f9f7 337
<> 144:ef7eb2e8f9f7 338 #ifdef HAL_HCD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 339 #include "stm32f1xx_hal_hcd.h"
<> 144:ef7eb2e8f9f7 340 #endif /* HAL_HCD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 341
<> 144:ef7eb2e8f9f7 342
<> 144:ef7eb2e8f9f7 343 /* Exported macro ------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 344 #ifdef USE_FULL_ASSERT
<> 144:ef7eb2e8f9f7 345 /**
<> 144:ef7eb2e8f9f7 346 * @brief The assert_param macro is used for function's parameters check.
<> 144:ef7eb2e8f9f7 347 * @param expr: If expr is false, it calls assert_failed function
<> 144:ef7eb2e8f9f7 348 * which reports the name of the source file and the source
<> 144:ef7eb2e8f9f7 349 * line number of the call that failed.
<> 144:ef7eb2e8f9f7 350 * If expr is true, it returns no value.
<> 144:ef7eb2e8f9f7 351 * @retval None
<> 144:ef7eb2e8f9f7 352 */
<> 144:ef7eb2e8f9f7 353 #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
<> 144:ef7eb2e8f9f7 354 /* Exported functions ------------------------------------------------------- */
<> 144:ef7eb2e8f9f7 355 void assert_failed(uint8_t* file, uint32_t line);
<> 144:ef7eb2e8f9f7 356 #else
<> 144:ef7eb2e8f9f7 357 #define assert_param(expr) ((void)0)
<> 144:ef7eb2e8f9f7 358 #endif /* USE_FULL_ASSERT */
<> 144:ef7eb2e8f9f7 359
<> 144:ef7eb2e8f9f7 360 #ifdef __cplusplus
<> 144:ef7eb2e8f9f7 361 }
<> 144:ef7eb2e8f9f7 362 #endif
<> 144:ef7eb2e8f9f7 363
<> 144:ef7eb2e8f9f7 364 #endif /* __STM32F1xx_HAL_CONF_H */
<> 144:ef7eb2e8f9f7 365
<> 144:ef7eb2e8f9f7 366
<> 144:ef7eb2e8f9f7 367 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/