Dependencies: BLE_nRF8001 DebounceIn mbed
Revision 0:11e1f075d0d2, committed 2015-03-31
- Comitter:
- sitakumar
- Date:
- Tue Mar 31 20:39:50 2015 +0000
- Commit message:
- 3/31
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_nRF8001.lib Tue Mar 31 20:39:50 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/RedBearLab/code/BLE_nRF8001/#e9a412d69201
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DebounceIn.lib Tue Mar 31 20:39:50 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/AjK/code/DebounceIn/#31ae5cfb44a4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Tue Mar 31 20:39:50 2015 +0000 @@ -0,0 +1,176 @@ +#include "mbed.h" +#include "BLEPeripheral.h" + +//serial connection via USB +Serial serial(USBTX, USBRX); + +//Declare Input and Output pins +DigitalIn pb(D3); +AnalogIn pH_sensor(A0); +InterruptIn button(D2); +DigitalOut led(LED_RED); + +// The SPI construct, REQN and RDYN IO construct should be modified manually +// It depend on the board you are using and the REQN&RDYN configuration on BLE Shield +SPI spi(PTD2, PTD3, PTD1); +DigitalInOut BLE_RDY(PTD5); +DigitalInOut BLE_REQ(PTD0); +DigitalInOut BLE_RESET(PTA13); + +//for BLE +int count = 0; +unsigned char txbuf[16] = {0}; +unsigned char txlen = 0; + +/*----- BLE Utility -------------------------------------------------------------------------*/ +// create peripheral instance, see pinouts above +BLEPeripheral blePeripheral = BLEPeripheral(&BLE_REQ, &BLE_RDY, NULL); + +// create service +BLEService uartService = BLEService("713d0000503e4c75ba943148f18d941e"); + +// create characteristic +//BLECharacteristic txCharacteristic = BLECharacteristic("713d0002503e4c75ba943148f18d941e", BLENotify, 20); +BLECharacteristic rxCharacteristic = BLECharacteristic("713d0003503e4c75ba943148f18d941e", BLENotify, 20); +/*--------------------------------------------------------------------------------------------*/ + +unsigned int interval = 0; +unsigned char count_on = 0; + +//for pH measurement +int calib = 0; +int avgReading = 0; +bool calibrationORnot = true; +bool ready = false; +int* reading[] = {0,0}; + + +//This loop takes a reading by taking 15 measurements and averaging them when it is called in the loop "measure" +int takeReading() +{ + double totalVal = 0.0; + double pH_sensor_read = 0.0; + int totalReadings = 0; + while(totalReadings < 16){ + pH_sensor_read = pH_sensor.read(); + totalVal = totalVal + pH_sensor_read; + totalReadings++; + } + int avgSensor = totalVal/15; + return avgSensor; + } + +void calibration() +{ + serial.printf("enter calibration loop\n"); + //Loop to take calibration value + calib = takeReading(); + serial.printf("calib is %d\n", calib); +} + +void calculate() +{ + serial.printf("entered calc\n"); + //Take average of readings over 10 seconds + avgReading = takeReading(); + serial.printf("took reading\n"); + ready = true; +} + +void measure() +{ + serial.baud(115200); + serial.printf("start measurement"); + //cb.mode(PullUp); + if(calibrationORnot) + { + calibration(); + calibrationORnot = !calibrationORnot; + } +//Loop to take measurement + else if(!calibrationORnot) + { + serial.printf("enter measurement loop\n"); + serial.printf("calib is %d\n", calib); + calculate(); + } +} + + +int main() +{ + pb.mode(PullUp); + serial.baud(115200); + serial.printf("Hello SmartD!\n"); + serial.printf("Serial begin!\r\n"); + int pH,yint,tempC,tempF; + + /*----- BLE Utility ---------------------------------------------*/ + // set advertised local name and service UUID + blePeripheral.setLocalName("Sita"); + + blePeripheral.setAdvertisedServiceUuid(uartService.uuid()); + + // add service and characteristic + blePeripheral.addAttribute(uartService); + blePeripheral.addAttribute(rxCharacteristic); + //blePeripheral.addAttribute(txCharacteristic); + + // begin initialization + blePeripheral.begin(); + /*---------------------------------------------------------------*/ + + //serial.printf("GOT IT pH is %d, Temp is %d\n\r", reading[0], reading[1]); + serial.printf("BLE UART Peripheral begin!\r\n"); + if (calibrationORnot) + { + button.rise(&measure); + } + + while(1) + { + //serial.printf("GOT IT pH is %d, Temp is %d\n\r", reading[0], reading[1]); + BLECentral central = blePeripheral.central(); + if (ready) + { + //calcuating yintercept of the ADC -> pH equation using calibration value and given that calibration liquid is pH4 + yint = (68.97*calib)-4; + serial.printf("yint is %f", yint); + //assumes linear relationship between pin readout -> voltage ->pH + pH = (0.0209*3300)*(avgReading)-yint; + //conversion to degrees C from sensor output voltage + tempC = (((3000*avgReading/1000) - 1.022129)/-0.0018496); + tempF = (tempC *9/5) + 32; + //print current pH and temp + serial.printf("pH = %5.2d & temp = %5.2d F\n\r", pH, tempF); + ready = !ready; + } + if (central) + { + // central connected to peripheral + serial.printf("Connected to central\r\n"); + while (central.connected()) + { + if (!pb) // if button pushed + { + serial.printf("pH is %d, Temp is %d\n\r", pH, tempF); + // Read and send out pH value from measure function + //unsigned int value = pH; +// serial.printf("VALUE IS %d\n\r", value); +// const unsigned char val[1] = {value}; +// serial.printf("VALUE AFTER IS %d\n\r", val[1]); +// rxCharacteristic.setValue(val,1); + unsigned int value2 = tempF; + serial.printf("VALUE FIRST IS %d\n\r", value2); + const unsigned char val2[1] = {value2}; + serial.printf("VALUE AFTER IS %d\n\r", val2[1]); + rxCharacteristic.setValue(val2,1); + + } + } + + // central disconnected + serial.printf("Disconnected from central\r\n"); + } + } +} \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.lib Tue Mar 31 20:39:50 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/#487b796308b0