Motor.h

00001 /* mbed simple H-bridge motor controller
00002  * Copyright (c) 2007-2010, sford
00003  *
00004  * Permission is hereby granted, free of charge, to any person obtaining a copy
00005  * of this software and associated documentation files (the "Software"), to deal
00006  * in the Software without restriction, including without limitation the rights
00007  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
00008  * copies of the Software, and to permit persons to whom the Software is
00009  * furnished to do so, subject to the following conditions:
00010  *
00011  * The above copyright notice and this permission notice shall be included in
00012  * all copies or substantial portions of the Software.
00013  *
00014  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
00015  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
00016  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
00017  * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
00018  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
00019  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
00020  * THE SOFTWARE.
00021  */
00022 
00023 #ifndef MBED_MOTOR_H
00024 #define MBED_MOTOR_H
00025 
00026 #include "mbed.h"
00027 
00028 /** Interface to control a standard DC motor 
00029  * with an H-bridge using a PwmOut and 2 DigitalOuts
00030  */
00031 class Motor {
00032 public:
00033 
00034     /** Create a motor control interface    
00035      *
00036      * @param pwm A PwmOut pin, driving the H-bridge enable line to control the speed
00037      * @param fwd A DigitalOut, set high when the motor should go forward
00038      * @param rev A DigitalOut, set high when the motor should go backwards
00039      */
00040     Motor(PinName pwm, PinName fwd, PinName rev);
00041     
00042     /** Set the speed of the motor
00043      * 
00044      * @param speed The speed of the motor as a normalised value between -1.0 and 1.0
00045      */
00046     void speed(float speed);
00047 
00048 protected:
00049     PwmOut _pwm;
00050     DigitalOut _fwd;
00051     DigitalOut _rev;
00052 
00053 };
00054 
00055 #endif