Diff: targets/hal/TARGET_Freescale/TARGET_KL25Z/PeripheralNames.h

Revision:

17:151ab7482c89

Parent:

13:0645d8841f51

Child:

50:b08ceb75017d

--- a/targets/hal/TARGET_Freescale/TARGET_KL25Z/PeripheralNames.h	Wed Aug 07 16:33:54 2013 +0000
+++ b/targets/hal/TARGET_Freescale/TARGET_KL25Z/PeripheralNames.h	Thu Aug 08 15:42:46 2013 +0100
@@ -1,86 +1,89 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    UART_0 = (int)UART0_BASE,
-    UART_1 = (int)UART1_BASE,
-    UART_2 = (int)UART2_BASE
-} UARTName;
-#define STDIO_UART_TX     USBTX
-#define STDIO_UART_RX     USBRX
-#define STDIO_UART        UART_0
-
-typedef enum {
-    I2C_0 = (int)I2C0_BASE,
-    I2C_1 = (int)I2C1_BASE,
-} I2CName;
-
-#define TPM_SHIFT   8
-typedef enum {
-    PWM_1  = (0 << TPM_SHIFT) | (0),  // TPM0 CH0
-    PWM_2  = (0 << TPM_SHIFT) | (1),  // TPM0 CH1
-    PWM_3  = (0 << TPM_SHIFT) | (2),  // TPM0 CH2
-    PWM_4  = (0 << TPM_SHIFT) | (3),  // TPM0 CH3
-    PWM_5  = (0 << TPM_SHIFT) | (4),  // TPM0 CH4
-    PWM_6  = (0 << TPM_SHIFT) | (5),  // TPM0 CH5
-
-    PWM_7  = (1 << TPM_SHIFT) | (0),  // TPM1 CH0
-    PWM_8  = (1 << TPM_SHIFT) | (1),  // TPM1 CH1
-
-    PWM_9  = (2 << TPM_SHIFT) | (0),  // TPM2 CH0
-    PWM_10 = (2 << TPM_SHIFT) | (1)   // TPM2 CH1
-} PWMName;
-
-typedef enum {
-    ADC0_SE0  =  0,
-    ADC0_SE3  =  3,
-    ADC0_SE4b =  4,
-    ADC0_SE5b =  5,
-    ADC0_SE6b =  6,
-    ADC0_SE7b =  7,
-    ADC0_SE8  =  8,
-    ADC0_SE9  =  9,
-    ADC0_SE11 = 11,
-    ADC0_SE12 = 12,
-    ADC0_SE13 = 13,
-    ADC0_SE14 = 14,
-    ADC0_SE15 = 15,
-    ADC0_SE23 = 23
-} ADCName;
-
-typedef enum {
-    DAC_0 = 0
-} DACName;
-
-
-typedef enum {
-    SPI_0 = (int)SPI0_BASE,
-    SPI_1 = (int)SPI1_BASE,
-} SPIName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    UART_0 = (int)UART0_BASE,
+    UART_1 = (int)UART1_BASE,
+    UART_2 = (int)UART2_BASE
+} UARTName;
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        UART_0
+
+typedef enum {
+    I2C_0 = (int)I2C0_BASE,
+    I2C_1 = (int)I2C1_BASE,
+} I2CName;
+
+#define TPM_SHIFT   8
+typedef enum {
+    PWM_1  = (0 << TPM_SHIFT) | (0),  // TPM0 CH0
+    PWM_2  = (0 << TPM_SHIFT) | (1),  // TPM0 CH1
+    PWM_3  = (0 << TPM_SHIFT) | (2),  // TPM0 CH2
+    PWM_4  = (0 << TPM_SHIFT) | (3),  // TPM0 CH3
+    PWM_5  = (0 << TPM_SHIFT) | (4),  // TPM0 CH4
+    PWM_6  = (0 << TPM_SHIFT) | (5),  // TPM0 CH5
+
+    PWM_7  = (1 << TPM_SHIFT) | (0),  // TPM1 CH0
+    PWM_8  = (1 << TPM_SHIFT) | (1),  // TPM1 CH1
+
+    PWM_9  = (2 << TPM_SHIFT) | (0),  // TPM2 CH0
+    PWM_10 = (2 << TPM_SHIFT) | (1)   // TPM2 CH1
+} PWMName;
+
+#define CHANNELS_A_SHIFT 5
+typedef enum {
+    ADC0_SE0  =  0,
+    ADC0_SE3  =  3,
+    ADC0_SE4a =  (1 << CHANNELS_A_SHIFT) | (4),
+    ADC0_SE4b =  4,
+    ADC0_SE5b =  5,
+    ADC0_SE6b =  6,
+    ADC0_SE7a =  (1 << CHANNELS_A_SHIFT) | (7),
+    ADC0_SE7b =  7,
+    ADC0_SE8  =  8,
+    ADC0_SE9  =  9,
+    ADC0_SE11 = 11,
+    ADC0_SE12 = 12,
+    ADC0_SE13 = 13,
+    ADC0_SE14 = 14,
+    ADC0_SE15 = 15,
+    ADC0_SE23 = 23
+} ADCName;
+
+typedef enum {
+    DAC_0 = 0
+} DACName;
+
+
+typedef enum {
+    SPI_0 = (int)SPI0_BASE,
+    SPI_1 = (int)SPI1_BASE,
+} SPIName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif