mbed w/ spi bug fig
Fork of mbed-src by
Diff: capi/sleep_api.h
- Revision:
- 9:0ce32e54c9a7
- Parent:
- 8:4e25b8576136
- Child:
- 10:3bc89ef62ce7
--- a/capi/sleep_api.h Thu May 30 16:59:31 2013 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,64 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_SLEEP_API_H -#define MBED_SLEEP_API_H - -#include "device.h" - -#if DEVICE_SLEEP - -#ifdef __cplusplus -extern "C" { -#endif - -/** Send the microcontroller to sleep - * - * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the - * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates - * dynamic power used by the processor, memory systems and buses. The processor, peripheral and - * memory state are maintained, and the peripherals continue to work and can generate interrupts. - * - * The processor can be woken up by any internal peripheral interrupt or external pin interrupt. - * - * @note - * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored. - * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be - * able to access the LocalFileSystem - */ -void sleep(void); - -/** Send the microcontroller to deep sleep - * - * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode - * has the same sleep features as sleep plus it powers down peripherals and clocks. All state - * is still maintained. - * - * The processor can only be woken up by an external interrupt on a pin or a watchdog timer. - * - * @note - * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored. - * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be - * able to access the LocalFileSystem - */ -void deepsleep(void); - -#ifdef __cplusplus -} -#endif - -#endif - -#endif