Diff: includes/jfdctfst.c

Revision:

0:791a779d6220

diff -r 000000000000 -r 791a779d6220 includes/jfdctfst.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/includes/jfdctfst.c	Mon Jul 31 09:16:35 2017 +0000
@@ -0,0 +1,232 @@
+/*
+ * jfdctfst.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2015 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a fast, not so accurate integer implementation of the
+ * forward DCT (Discrete Cosine Transform).
+ *
+ * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
+ * on each column.  Direct algorithms are also available, but they are
+ * much more complex and seem not to be any faster when reduced to code.
+ *
+ * This implementation is based on Arai, Agui, and Nakajima's algorithm for
+ * scaled DCT.  Their original paper (Trans. IEICE E-71(11):1095) is in
+ * Japanese, but the algorithm is described in the Pennebaker & Mitchell
+ * JPEG textbook (see REFERENCES section in file README).  The following code
+ * is based directly on figure 4-8 in P&M.
+ * While an 8-point DCT cannot be done in less than 11 multiplies, it is
+ * possible to arrange the computation so that many of the multiplies are
+ * simple scalings of the final outputs.  These multiplies can then be
+ * folded into the multiplications or divisions by the JPEG quantization
+ * table entries.  The AA&N method leaves only 5 multiplies and 29 adds
+ * to be done in the DCT itself.
+ * The primary disadvantage of this method is that with fixed-point math,
+ * accuracy is lost due to imprecise representation of the scaled
+ * quantization values.  The smaller the quantization table entry, the less
+ * precise the scaled value, so this implementation does worse with high-
+ * quality-setting files than with low-quality ones.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+#ifdef DCT_IFAST_SUPPORTED
+
+
+/*
+ * This module is specialized to the case DCTSIZE = 8.
+ */
+
+#if DCTSIZE != 8
+  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+#endif
+
+
+/* Scaling decisions are generally the same as in the LL&M algorithm;
+ * see jfdctint.c for more details.  However, we choose to descale
+ * (right shift) multiplication products as soon as they are formed,
+ * rather than carrying additional fractional bits into subsequent additions.
+ * This compromises accuracy slightly, but it lets us save a few shifts.
+ * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples)
+ * everywhere except in the multiplications proper; this saves a good deal
+ * of work on 16-bit-int machines.
+ *
+ * Again to save a few shifts, the intermediate results between pass 1 and
+ * pass 2 are not upscaled, but are represented only to integral precision.
+ *
+ * A final compromise is to represent the multiplicative constants to only
+ * 8 fractional bits, rather than 13.  This saves some shifting work on some
+ * machines, and may also reduce the cost of multiplication (since there
+ * are fewer one-bits in the constants).
+ */
+
+#define CONST_BITS  8
+
+
+/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
+ * causing a lot of useless floating-point operations at run time.
+ * To get around this we use the following pre-calculated constants.
+ * If you change CONST_BITS you may want to add appropriate values.
+ * (With a reasonable C compiler, you can just rely on the FIX() macro...)
+ */
+
+#if CONST_BITS == 8
+#define FIX_0_382683433  ((INT32)   98)		/* FIX(0.382683433) */
+#define FIX_0_541196100  ((INT32)  139)		/* FIX(0.541196100) */
+#define FIX_0_707106781  ((INT32)  181)		/* FIX(0.707106781) */
+#define FIX_1_306562965  ((INT32)  334)		/* FIX(1.306562965) */
+#else
+#define FIX_0_382683433  FIX(0.382683433)
+#define FIX_0_541196100  FIX(0.541196100)
+#define FIX_0_707106781  FIX(0.707106781)
+#define FIX_1_306562965  FIX(1.306562965)
+#endif
+
+
+/* We can gain a little more speed, with a further compromise in accuracy,
+ * by omitting the addition in a descaling shift.  This yields an incorrectly
+ * rounded result half the time...
+ */
+
+#ifndef USE_ACCURATE_ROUNDING
+#undef DESCALE
+#define DESCALE(x,n)  RIGHT_SHIFT(x, n)
+#endif
+
+
+/* Multiply a DCTELEM variable by an INT32 constant, and immediately
+ * descale to yield a DCTELEM result.
+ */
+
+#define MULTIPLY(var,const)  ((DCTELEM) DESCALE((var) * (const), CONST_BITS))
+
+
+/*
+ * Perform the forward DCT on one block of samples.
+ *
+ * cK represents cos(K*pi/16).
+ */
+
+GLOBAL(void)
+jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  DCTELEM tmp10, tmp11, tmp12, tmp13;
+  DCTELEM z1, z2, z3, z4, z5, z11, z13;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+
+  dataptr = data;
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Load data into workspace */
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]);
+    tmp7 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]);
+    tmp6 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]);
+    tmp5 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]);
+    tmp4 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]);
+
+    /* Even part */
+
+    tmp10 = tmp0 + tmp3;	/* phase 2 */
+    tmp13 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp1 - tmp2;
+
+    /* Apply unsigned->signed conversion. */
+    dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */
+    dataptr[4] = tmp10 - tmp11;
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
+    dataptr[2] = tmp13 + z1;	/* phase 5 */
+    dataptr[6] = tmp13 - z1;
+
+    /* Odd part */
+
+    tmp10 = tmp4 + tmp5;	/* phase 2 */
+    tmp11 = tmp5 + tmp6;
+    tmp12 = tmp6 + tmp7;
+
+    /* The rotator is modified from fig 4-8 to avoid extra negations. */
+    z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
+    z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
+    z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
+    z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
+
+    z11 = tmp7 + z3;		/* phase 5 */
+    z13 = tmp7 - z3;
+
+    dataptr[5] = z13 + z2;	/* phase 6 */
+    dataptr[3] = z13 - z2;
+    dataptr[1] = z11 + z4;
+    dataptr[7] = z11 - z4;
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns. */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
+    tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
+    tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
+    tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
+    tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
+
+    /* Even part */
+
+    tmp10 = tmp0 + tmp3;	/* phase 2 */
+    tmp13 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp1 - tmp2;
+
+    dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */
+    dataptr[DCTSIZE*4] = tmp10 - tmp11;
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
+    dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */
+    dataptr[DCTSIZE*6] = tmp13 - z1;
+
+    /* Odd part */
+
+    tmp10 = tmp4 + tmp5;	/* phase 2 */
+    tmp11 = tmp5 + tmp6;
+    tmp12 = tmp6 + tmp7;
+
+    /* The rotator is modified from fig 4-8 to avoid extra negations. */
+    z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
+    z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
+    z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
+    z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
+
+    z11 = tmp7 + z3;		/* phase 5 */
+    z13 = tmp7 - z3;
+
+    dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */
+    dataptr[DCTSIZE*3] = z13 - z2;
+    dataptr[DCTSIZE*1] = z11 + z4;
+    dataptr[DCTSIZE*7] = z11 - z4;
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+#endif /* DCT_IFAST_SUPPORTED */