Ray Liu / Mbed OS NuMaker-mbed-PWM1_DCservo

Modify the file main.cpp for M487

Files at this revision

API Documentation at this revision

Revision 0:6e96e6e154d1, committed 2017-09-29

Comitter:
shliu1
Date:
Fri Sep 29 05:45:11 2017 +0000
Commit message:
main.cpp adds the setting of TARGET_NUMAKER_PFM_M487 for M487

Changed in this revision

.gitignore Show annotated file Show diff for this revision Revisions of this file
README.md Show annotated file Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed-os.lib Show annotated file Show diff for this revision Revisions of this file 
diff -r 000000000000 -r 6e96e6e154d1 .gitignore
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.gitignore	Fri Sep 29 05:45:11 2017 +0000
@@ -0,0 +1,4 @@
+.build
+.mbed
+projectfiles
+*.py*

diff -r 000000000000 -r 6e96e6e154d1 README.md
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.md	Fri Sep 29 05:45:11 2017 +0000
@@ -0,0 +1,25 @@
+# Getting started PWM1 with DC servo motor on mbed OS
+
+
+### Import NuMaker-mbed-PWM1_DCservo from on-line IDE
+1. Please choose Nuvoton NuMaker-PFM-XXX as your target platform.
+2. Please press the left-up icon "New", then choose "NuMaker PWM1 drive + 5V DC servo motor" from the template list.
+3. Your NuMaker-mbed-PWM1_DCservo program is existed.
+
+#### Now compile
+Please press compile icon.
+
+#### Burn Code & Execute
+1. Connect the board NuMaker-PFM-XXX with your PC by USB cable, then there will be one "mbed" disk.
+2. Copy the built binary file into "mbed" disk on you PC.
+3. Press device's reset button to execute, and you could get the below log by uart console.
+-------------------------------------------------------------------------------
+...DCserv Start...
+DCservo pulse width = 500
+DCservo pulse width = 700
+
+		:
+		:
+...DCserv End.....
+--------------------------------------------------------------------------
+   PWM1 outputs to drive DC servo motor		
\ No newline at end of file

diff -r 000000000000 -r 6e96e6e154d1 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Sep 29 05:45:11 2017 +0000
@@ -0,0 +1,24 @@
+// NuMaker-PFM-NUC472 : PWM1 output to drive DC servo motor
+#include "mbed.h"
+
+#if defined(TARGET_NUMAKER_PFM_NUC472)
+PwmOut pwm1(PF_10); // PWM1 pinname
+#elif defined(TARGET_NUMAKER_PFM_M453)
+PwmOut pwm1(PC_7);
+#elif defined(TARGET_NUMAKER_PFM_M487)
+PwmOut pwm1(PA_4); // PWM1 pinname
+#endif
+
+int main() {
+    
+    int i=0;
+    printf("...DCserv Start...\n\r");
+    pwm1.period_us(20000);      // set PWM period to 20ms (50Hz)
+        
+    for (i=500; i<=2500; i=i+200) { // from 0.5ms to 2.5ms
+        pwm1.pulsewidth_us(i);      // set PWM pulse width to rotate motor
+        Thread::wait(1000);         // delay
+        printf("DCservo pulse width = %d\n\r", i);
+    } 
+    printf("...DCserv End.....\n\r");                             
+}

diff -r 000000000000 -r 6e96e6e154d1 mbed-os.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Fri Sep 29 05:45:11 2017 +0000
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#ca661f9d28526ca8f874b05432493a489c9671ea