![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Repository for testing ADF code of COM_TMTC_SIMPLE
Fork of COM_MNG_TMTC_SIMPLE by
adf.h
- Committer:
- shreeshas95
- Date:
- 2015-12-22
- Revision:
- 2:2caf2a9a13aa
- Parent:
- 1:a0055b3280c8
- Child:
- 3:6c81fc8834e2
File content as of revision 2:2caf2a9a13aa:
//without reset feature , with state checks. InterruptIn IRQ(ADF_IRQ); Ticker ticker; bool sent_tmfrom_SDcard; bool loop_on; bool ADF_off; bool buffer_state; uint8_t signal = 0x00; unsigned char bbram_buffer[66]={0x19,0x00,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x00,0xF4,0xC2,0x10,0xC0,0x00,0x30,0x31,0x07,0x00,0x01,0x00,0x7F,0x00,0x0B,0x37,0x00,0x00,0x40,0x0C,0x00,0x05,0x00,0x00,0x18,0x12,0x34,0x56,0x10,0x10,0xC4,0x14,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00}; //int initialise_card(); //int disk_initialize(); #define bbram_write {\ SPI_mutex.lock();\ gCS_ADF=0;\ spi.write(0xB0);\ wait_us(300);\ gCS_ADF=1;\ gCS_ADF=0;\ for(int i=0;i<66;i++){\ spi.write(bbram_buffer[i]);\ }\ gCS_ADF=1;\ SPI_mutex.unlock();\ } //------------------------------------------------------------------------ // state checking functions //bool assrt_phy_off( int, int, int); //bool assrt_phy_on( int,int,int); //bool assrt_phy_tx(int,int,int); #define START_ADDRESS 0x020; #define MISO_PIN PTE3 /**************Defining Counter Limits**************/ #define THRS 20 #define STATE_ERR_THRS 20 #define PHY_OFF_EXEC_TIME 300 #define PHY_ON_EXEC_TIME 300 #define PHY_TX_EXEC_TIME 600 /******DEFINING COMMANDS*********/ #define CMD_HW_RESET 0xC8 #define CMD_PHY_ON 0xB1 #define CMD_PHY_OFF 0xB0 #define CMD_PHY_TX 0xB5 #define CMD_CONFIG_DEV 0xBB #define check_status {\ unsigned char stat=0;\ gCS_ADF=0;\ spi.write(0xFF);\ stat = spi.write(0xFF);\ gCS_ADF=1;\ status = stat;\ } // all three arguments are int #define assrt_phy_off(return_this) {\ int cmd_err_cnt = 0;\ int spi_err_cnt = 0;\ int state_err_cnt = 0;\ for(int i = 0 ; i < 40 ;i++){\ check_status;\ if(status == 0xB1){\ return_this = 0;\ break;\ }\ else if(cmd_err_cnt>THRS||spi_err_cnt>THRS){\ return_this = 1;\ break;\ }\ else if(state_err_cnt>STATE_ERR_THRS){\ return_this = 1;\ break;\ }\ else if( (status & 0xA0) == 0xA0 ){\ gCS_ADF=0;\ spi.write(CMD_PHY_OFF);\ gCS_ADF=1;\ wait_us(PHY_OFF_EXEC_TIME);\ state_err_cnt++;\ }\ else if(status&0x80==0x00){\ wait_ms(5);\ spi_err_cnt++;\ }\ else {\ wait_ms(1);\ cmd_err_cnt++;\ }\ }\ } //#define assrt_phy_on(cmd_err_cnt, spi_err_cnt, state_err_cnt, return_this){\ // status=check_status();\ // if((status&0x1F)==0x12){\ // return 0;\ // }\ // else if(cmd_err_cnt>THRS||spi_err_cnt>THRS){\ // return 1;\ // }\ // else if(state_err_cnt>STATE_ERR_THRS){\ // return 1;\ // }\ // else if((status&0xA0)==0xA0){\ // cs_adf=0;\ // spi.write(0xB1);\ // cs_adf=1;\ // wait_us(PHY_ON_EXEC_TIME);\ // return assrt_phy_on(cmd_err_cnt,spi_err_cnt,state_err_cnt+1);\ // }\ // else if(status&0x80==0x00){\ // wait_ms(5);\ // //Error: SPI=0 Not ready CMD= Dont care // return assrt_phy_on(cmd_err_cnt,spi_err_cnt+1,state_err_cnt);\ // }\ // else{\ // if(status&0xA0==0x80){\ // wait_ms(1);\ // //Error: Command Not ready SPI Ready cmd_err_cnt is a global variable // return assrt_phy_on(cmd_err_cnt+1,spi_err_cnt,state_err_cnt);\ // }\ // }\ //} #define initial_adf_check {\ spi.write(CMD_PHY_OFF);\ int tempReturn = 0;\ bool flag = false;\ while( hw_reset_err_cnt < 2 ){\ assrt_phy_off( tempReturn);\ if( !tempReturn ){\ bbram_write;\ bbram_flag=1;\ flag = true;\ break;\ }\ else{\ hardware_reset(0);\ hw_reset_err_cnt++;\ gPC.puts("Resetting hardware\r\n");\ }\ }\ if( flag == false ){\ gPC.puts("Seems to be SPI problem\r\n");\ }\ assrt_phy_off(tempReturn);\ if(!bbram_flag){\ bcn_flag=1;\ }\ } unsigned char status =0; unsigned int cmd_err_cnt=0; unsigned int state_err_cnt=0; unsigned int miso_err_cnt=0; unsigned int hw_reset_err_cnt=0; bool bcn_flag=0; bool bbram_flag=0; //bool assrt_phy_off(int cmd_err_cnt,int spi_err_cnt,int state_err_cnt){ // status=check_status(); // if(status==0xB1){ // return 0; // } // else if(cmd_err_cnt>THRS||spi_err_cnt>THRS){ // return 1;//You need to Reset the hardware // } // else if(state_err_cnt>STATE_ERR_THRS){ // return 1;//Again reset the hardware // } // else if((status&0xA0)==0xA0){ //If Status' first three bit ore 0b1X1 =>SPI ready, Dont care interrupt and CMD Ready. // cs_adf=0; // spi.write(CMD_PHY_OFF); //CMD_PHY_OFF=0xB0 // cs_adf=1; // wait_us(PHY_OFF_EXEC_TIME);// Typical = 24us We are giving 300us // return assrt_phy_off(cmd_err_cnt,spi_err_cnt,state_err_cnt+1); // } // else if(status&0x80==0x00){ // wait_ms(5); // //Error: SPI=0 Not ready CMD= Dont care // return assrt_phy_off(cmd_err_cnt,spi_err_cnt+1,state_err_cnt); // } // else {//if(status&0xA0==0x80){ // wait_ms(1); // //Error: Command Not ready SPI Ready cmd_err_cnt is a global variable // return assrt_phy_off(cmd_err_cnt+1,spi_err_cnt,state_err_cnt); // } //} //bool assrt_phy_on(int cmd_err_cnt,int spi_err_cnt,int state_err_cnt){ // status=check_status(); // if((status&0x1F)==0x12){ // return 0; // } // else if(cmd_err_cnt>THRS||spi_err_cnt>THRS){ // return 1;//You need to Reset the hardware // } // else if(state_err_cnt>STATE_ERR_THRS){ // return 1;//Again reset the hardware // } // else if((status&0xA0)==0xA0){ //If Status' first three bit ore 0b1X1 =>SPI ready, Dont care interrupt and CMD Ready. // cs_adf=0; // spi.write(0xB1); //CMD_PHY_OFF // cs_adf=1; // wait_us(PHY_ON_EXEC_TIME);// Typical = 24us We are giving 300us // return assrt_phy_on(cmd_err_cnt,spi_err_cnt,state_err_cnt+1); // } // else if(status&0x80==0x00){ // wait_ms(5); // //Error: SPI=0 Not ready CMD= Dont care // return assrt_phy_on(cmd_err_cnt,spi_err_cnt+1,state_err_cnt); // } // else{ // if(status&0xA0==0x80){ // wait_ms(1); // //Error: Command Not ready SPI Ready cmd_err_cnt is a global variable // return assrt_phy_on(cmd_err_cnt+1,spi_err_cnt,state_err_cnt); // } // } //} // bool assrt_phy_tx(int cmd_err_cnt,int spi_err_cnt,int state_err_cnt){ // status=check_status(); // if((status & 0x1F) == 0x14){ // return 0; // } // else if(cmd_err_cnt>THRS||spi_err_cnt>THRS){ // return 1;//You need to Reset the hardware // } // else if(state_err_cnt>STATE_ERR_THRS){ // return 1;//Again reset the hardware // } // else if((status&0xA0)==0xA0){ //If Status' first three bit ore 0b1X1 =>SPI ready, Dont care interrupt and CMD Ready. // cs_adf=0; // spi.write(0xB1); //CMD_PHY_OFF // cs_adf=1; // wait_us(PHY_TX_EXEC_TIME);// Typical = 24us We are giving 300us // return assrt_phy_tx(cmd_err_cnt,spi_err_cnt,state_err_cnt+1); // } // else if(status&0x80==0x00){ // wait_ms(1); // //Error: SPI=0 Not ready CMD= Dont care // return assrt_phy_tx(cmd_err_cnt,spi_err_cnt+1,state_err_cnt); // } // else { // if(status&0xA0==0x80){ // wait_us(50); // //Error: Command Not ready SPI Ready cmd_err_cnt is a global variable // return assrt_phy_tx(cmd_err_cnt+1,spi_err_cnt,state_err_cnt); // } // } //} bool hardware_reset(int bcn_call){ for(int i= 0; i < 20 ; i++){ gCS_ADF=0; spi.write(CMD_HW_RESET); gCS_ADF=1; wait_ms(2);// Typically 1 ms int count=0; int temp_return = 0; while(count<10 && miso_err_cnt<10){ if(MISO_PIN){ assrt_phy_off(temp_return); if(!temp_return){ return 0; } count++; } else{ wait_us(50); miso_err_cnt++; } } } return 1; } //bool hardware_reset(int bcn_call){ // if (bcn_call>20){//Worst Case 20seconds will be lost ! // return 1; // } // int count=0; // cs_adf=0; // spi.write(CMD_HW_RESET); // cs_adf=1; // wait_ms(2);// Typically 1 ms // while(count<10 && miso_err_cnt<10){ // if(MISO_PIN){ // int temp_return; // assrt_phy_off(0,0,0,temp_return); // if(!temp_return){ // break; // } // count++; // } // else{ // wait_us(50); // miso_err_cnt++; // } // } // if(count==10 ||miso_err_cnt==10){ // return hardware_reset(bcn_call+1); // } // else // return 0; // //} //void initial_adf_check(){ // spi.write(CMD_PHY_OFF); //0xB0 // while(hw_reset_err_cnt<2){ // // if(!assrt_phy_off(0,0,0)){ //assrt_phy_off () returns 0 if state is PHY_OFF , returns 1 if couldn't go to PHY_OFF // bbram_write(); // bbram_flag=1; // break; // } // else{ // hardware_reset(0); // Asserts Hardware for 20sec(20times). PHY_OFF for 20,000 times // hw_reset_err_cnt++; // } // } // assrt_phy_off(0,0,0);// We actually do not need this but make sure "we do not need this" // if(!bbram_flag){ // //Switch to beacon // bcn_flag=1; // } //} //for reseting the transmission call assert function after b5 and b1. after b1 assert_phi_on and after b5 assert_phi_tx. //---------------------------------------------------------------------------- # define initiate {\ SPI_mutex.lock();\ gCS_ADF=0;\ spi.write(0xFF);\ spi.write(0xFF);\ gCS_ADF=1;\ gCS_ADF=0;\ spi.write(0x08);\ spi.write(0x14);\ spi.write(0xFF);\ gCS_ADF=1;\ gCS_ADF=0;\ spi.write(0x08);\ spi.write(0x15);\ spi.write(0xFF);\ gCS_ADF=1;\ gCS_ADF=0;\ spi.write(0x09);\ spi.write(0x24);\ spi.write(0x20);\ gCS_ADF=1;\ gCS_ADF=0;\ spi.write(0x09);\ spi.write(0x37);\ spi.write(0xE0);\ gCS_ADF=1;\ gCS_ADF=0;\ spi.write(0x09);\ spi.write(0x36);\ spi.write(0x70);\ gCS_ADF=1;\ gCS_ADF=0;\ spi.write(0x09);\ spi.write(0x39);\ spi.write(0x10);\ gCS_ADF=1;\ SPI_mutex.unlock();\ } #define write_data {\ SPI_mutex.lock();\ gCS_ADF=0;\ spi.write(0x0B);\ spi.write(0x36);\ spi.write(0xFF);\ gCS_ADF=1;\ gCS_ADF=0;\ if(buffer_state){\ spi.write(0x18);\ spi.write(0x20);\ for(unsigned char i=0; i<112;i++){\ spi.write(buffer_112[i]);\ }\ }\ else{\ spi.write(0x18);\ spi.write(0x90);\ for(unsigned char i=0; i<112;i++){\ spi.write(buffer_112[i]);\ }\ }\ gCS_ADF=1;\ SPI_mutex.unlock();\ buffer_state = !buffer_state;\ if(last_buffer){\ ADF_off = true;\ gPC.puts("adf_off\r\n");\ }\ } void check(){ if(IRQ){ gCOM_MNG_TMTC_THREAD->signal_set(signal); } } #define send_data {\ SPI_mutex.lock();\ gCS_ADF=0;\ spi.write(0xBB);\ gCS_ADF=1;\ gCS_ADF=0;\ spi.write(0xFF);\ spi.write(0xFF);\ gCS_ADF=1;\ SPI_mutex.unlock();\ if(sent_tmfrom_SDcard){\ send_tm_from_SD_card();\ }else{\ snd_tm.transmit_data(buffer_112,&last_buffer);\ }\ write_data;\ if(sent_tmfrom_SDcard){\ send_tm_from_SD_card();\ }else{\ snd_tm.transmit_data(buffer_112,&last_buffer);\ }\ write_data;\ if(sent_tmfrom_SDcard){\ send_tm_from_SD_card();\ }else{\ snd_tm.transmit_data(buffer_112,&last_buffer);\ }\ SPI_mutex.lock();\ gCS_ADF=0;\ spi.write(0xB1);\ gCS_ADF=1;\ wait_us(300);\ gCS_ADF=0;\ spi.write(0xFF);\ spi.write(0xFF);\ gCS_ADF=1;\ gCS_ADF=0;\ spi.write(0xB5);\ gCS_ADF=1;\ wait_us(300);\ gCS_ADF=0;\ spi.write(0xFF);\ spi.write(0xFF);\ gCS_ADF=1;\ SPI_mutex.unlock();\ ticker.attach_us(&check,32000);\ } #define adf_SND_SDCard {\ buffer_state = true;\ last_buffer = false;\ loop_on = true;\ ADF_off = false;\ sent_tmfrom_SDcard = true;\ signal = COM_MNG_TMTC_SIGNAL_ADF_SD;\ start_block_num = starting_add;\ end_block_num = ending_add;\ initial_adf_check;\ initiate;\ send_data;\ while(loop_on){\ /*led2=!led2;*/\ Thread::signal_wait(COM_MNG_TMTC_SIGNAL_ADF_SD);\ if(ADF_off){\ SPI_mutex.lock();\ ticker.detach();\ gCS_ADF=0;\ spi.write(0xB1);\ gCS_ADF=1;\ SPI_mutex.unlock();\ gPC.puts("transmission done\r\n");\ loop_on = false;\ }else{\ write_data;\ if(!last_buffer)\ send_tm_from_SD_card();\ }\ }\ } void read_TC(Base_tc* TC_ptr){ gPC.puts("Inside sd card sending\r\n"); unsigned char service_subtype = 0; uint64_t starting_add = 0, ending_add = 0; service_subtype = (TC_ptr->TC_string[2])&0x0f; starting_add = (TC_ptr->TC_string[5]) + ( (TC_ptr->TC_string[4])<<8 ) + ( (TC_ptr->TC_string[3]) <<16); ending_add = (TC_ptr->TC_string[8]) + ( (TC_ptr->TC_string[7])<<8 ) + ( (TC_ptr->TC_string[6]) <<16); starting_add = 10; // for now ending_add = 20; // adf_SND_SDCard(starting_add , ending_add); gPC.puts("sending from sd card\r\n"); adf_SND_SDCard; } //Timeout ADF_non_responsive_timeout; //bool ADF_non_responsive_flag = false; // //void ADF_non_responsive_fun(){ // ADF_non_responsive_flag = true; // gCOM_MNG_TMTC_THREAD->signal_set(signal); //} void adf_not_SDcard(){ buffer_state = true; last_buffer = false; loop_on = true; ADF_off = false; sent_tmfrom_SDcard = false; signal = COM_MNG_TMTC_SIGNAL_ADF_NSD; initial_adf_check; initiate; send_data; // gPC.puts("Inside adf transmission\r\n"); // ADF_non_responsive_timeout.attach(&ADF_non_responsive_fun, 10); while(loop_on){ Thread::signal_wait(COM_MNG_TMTC_SIGNAL_ADF_NSD); // if( ADF_non_responsive_flag == false ){ if(ADF_off){ SPI_mutex.lock(); ticker.detach(); // wait_ms(35); gCS_ADF=0; spi.write(0xB1); gCS_ADF=1; SPI_mutex.unlock(); loop_on = false; }else{ write_data; snd_tm.transmit_data(buffer_112,&last_buffer); } // } // else{ // gPC.puts("ADF non responsive\r\n"); // break; // } } }