mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/gpio_irq_api.c
- Revision:
- 146:f64d43ff0c18
- Child:
- 148:213f3ebbe634
diff -r cfacfb0a9e19 -r f64d43ff0c18 targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/gpio_irq_api.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/gpio_irq_api.c Wed Apr 02 21:00:08 2014 +0100 @@ -0,0 +1,214 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include <stddef.h> +#include "cmsis.h" + +#include "gpio_irq_api.h" +#include "gpio_api.h" +#include "fsl_gpio_hal.h" +#include "fsl_port_hal.h" +#include "error.h" + +#define CHANNEL_NUM 160 + +static uint32_t channel_ids[CHANNEL_NUM] = {0}; +static gpio_irq_handler irq_handler; + +#define IRQ_DISABLED (0) +#define IRQ_RAISING_EDGE (9) +#define IRQ_FALLING_EDGE (10) +#define IRQ_EITHER_EDGE (11) + +static void handle_interrupt_in(PortName port, int ch_base) { + uint32_t i; + + for (i = 0; i < 32; i++) { + if (port_hal_read_pin_interrupt_flag(port, i)) { + uint32_t id = channel_ids[ch_base + i]; + if (id == 0) { + continue; + } + + gpio_irq_event event = IRQ_NONE; + switch (BR_PORT_PCRn_IRQC(port, i)) { + case IRQ_RAISING_EDGE: + event = IRQ_RISE; + break; + + case IRQ_FALLING_EDGE: + event = IRQ_FALL; + break; + + case IRQ_EITHER_EDGE: + event = (gpio_hal_read_pin_input(port, i)) ? (IRQ_RISE) : (IRQ_FALL); + break; + } + if (event != IRQ_NONE) { + irq_handler(id, event); + } + } + } + port_hal_clear_port_interrupt_flag(port); +} + +void gpio_irqA(void) {handle_interrupt_in(PortA, 0);} +void gpio_irqB(void) {handle_interrupt_in(PortB, 32);} +void gpio_irqC(void) {handle_interrupt_in(PortC, 64);} +void gpio_irqD(void) {handle_interrupt_in(PortD, 96);} +void gpio_irqE(void) {handle_interrupt_in(PortE, 128);} + +int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) { + if (pin == NC) { + return -1; + } + + irq_handler = handler; + obj->port = pin >> GPIO_PORT_SHIFT; + obj->pin = pin & 0x7F; + + uint32_t ch_base, vector; + IRQn_Type irq_n; + switch (obj->port) { + case PortA: + ch_base = 0; + irq_n = PORTA_IRQn; + vector = (uint32_t)gpio_irqA; + break; + case PortB: + ch_base = 32; + irq_n = PORTB_IRQn; + vector = (uint32_t)gpio_irqB; + break; + case PortC: + ch_base = 64; + irq_n = PORTC_IRQn; + vector = (uint32_t)gpio_irqC; + break; + case PortD: + ch_base = 96; + irq_n = PORTD_IRQn; + vector = (uint32_t)gpio_irqD; + break; + case PortE: + ch_base = 128; + irq_n = PORTE_IRQn; + vector = (uint32_t)gpio_irqE; + break; + + default: + error("gpio_irq only supported on port A-E.\n"); + break; + } + NVIC_SetVector(irq_n, vector); + NVIC_EnableIRQ(irq_n); + + obj->ch = ch_base + obj->pin; + channel_ids[obj->ch] = id; + + return 0; +} + +void gpio_irq_free(gpio_irq_t *obj) { + channel_ids[obj->ch] = 0; +} + +void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) { + port_interrupt_config_t irq_settings = kPortIntDisabled; + + switch (BR_PORT_PCRn_IRQC(obj->port, obj->pin)) { + case IRQ_DISABLED: + if (enable) + irq_settings = (event == IRQ_RISE) ? (kPortIntRisingEdge) : (kPortIntFallingEdge); + break; + + case IRQ_RAISING_EDGE: + if (enable) { + irq_settings = (event == IRQ_RISE) ? (kPortIntRisingEdge) : (kPortIntEitherEdge); + } else { + if (event == IRQ_FALL) + irq_settings = kPortIntRisingEdge; + } + break; + + case IRQ_FALLING_EDGE: + if (enable) { + irq_settings = (event == IRQ_FALL) ? (kPortIntFallingEdge) : (kPortIntEitherEdge); + } else { + if (event == IRQ_RISE) + irq_settings = kPortIntFallingEdge; + } + break; + + case IRQ_EITHER_EDGE: + if (enable) { + irq_settings = kPortIntEitherEdge; + } else { + irq_settings = (event == IRQ_RISE) ? (kPortIntFallingEdge) : (kPortIntRisingEdge); + } + break; + } + + port_hal_configure_pin_interrupt(obj->port, obj->pin, irq_settings); + port_hal_clear_pin_interrupt_flag(obj->port, obj->pin); +} + +void gpio_irq_enable(gpio_irq_t *obj) { + switch (obj->port) { + case PortA: + NVIC_EnableIRQ(PORTA_IRQn); + break; + case PortB: + NVIC_EnableIRQ(PORTB_IRQn); + break; + case PortC: + NVIC_EnableIRQ(PORTC_IRQn); + break; + case PortD: + NVIC_EnableIRQ(PORTD_IRQn); + break; + case PortE: + NVIC_EnableIRQ(PORTE_IRQn); + break; + } +} + +void gpio_irq_disable(gpio_irq_t *obj) { + switch (obj->port) { + case PortA: + NVIC_DisableIRQ(PORTA_IRQn); + break; + case PortB: + NVIC_DisableIRQ(PORTB_IRQn); + break; + case PortC: + NVIC_DisableIRQ(PORTC_IRQn); + break; + case PortD: + NVIC_DisableIRQ(PORTD_IRQn); + break; + case PortE: + NVIC_DisableIRQ(PORTE_IRQn); + break; + } +} + +// Change the NMI pin to an input. This allows NMI pin to +// be used as a low power mode wakeup. The application will +// need to change the pin back to NMI_b or wakeup only occurs once! +void NMI_Handler(void) { + gpio_t gpio; + gpio_init_in(&gpio, PTA4); +}