mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_cmp.h
- Revision:
- 146:f64d43ff0c18
diff -r cfacfb0a9e19 -r f64d43ff0c18 targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_cmp.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_cmp.h Wed Apr 02 21:00:08 2014 +0100 @@ -0,0 +1,1018 @@ +/* + * Copyright (c) 2014, Freescale Semiconductor, Inc. + * All rights reserved. + * + * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_CMP_REGISTERS_H__ +#define __HW_CMP_REGISTERS_H__ + +#include "regs.h" + +/* + * MK64F12 CMP + * + * High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX) + * + * Registers defined in this header file: + * - HW_CMP_CR0 - CMP Control Register 0 + * - HW_CMP_CR1 - CMP Control Register 1 + * - HW_CMP_FPR - CMP Filter Period Register + * - HW_CMP_SCR - CMP Status and Control Register + * - HW_CMP_DACCR - DAC Control Register + * - HW_CMP_MUXCR - MUX Control Register + * + * - hw_cmp_t - Struct containing all module registers. + */ + +//! @name Module base addresses +//@{ +#ifndef REGS_CMP_BASE +#define HW_CMP_INSTANCE_COUNT (3U) //!< Number of instances of the CMP module. +#define HW_CMP0 (0U) //!< Instance number for CMP0. +#define HW_CMP1 (1U) //!< Instance number for CMP1. +#define HW_CMP2 (2U) //!< Instance number for CMP2. +#define REGS_CMP0_BASE (0x40073000U) //!< Base address for CMP0. +#define REGS_CMP1_BASE (0x40073008U) //!< Base address for CMP1. +#define REGS_CMP2_BASE (0x40073010U) //!< Base address for CMP2. + +//! @brief Table of base addresses for CMP instances. +static const uint32_t __g_regs_CMP_base_addresses[] = { + REGS_CMP0_BASE, + REGS_CMP1_BASE, + REGS_CMP2_BASE, + }; + +//! @brief Get the base address of CMP by instance number. +//! @param x CMP instance number, from 0 through 2. +#define REGS_CMP_BASE(x) (__g_regs_CMP_base_addresses[(x)]) + +//! @brief Get the instance number given a base address. +//! @param b Base address for an instance of CMP. +#define REGS_CMP_INSTANCE(b) ((b) == REGS_CMP0_BASE ? HW_CMP0 : (b) == REGS_CMP1_BASE ? HW_CMP1 : (b) == REGS_CMP2_BASE ? HW_CMP2 : 0) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_CMP_CR0 - CMP Control Register 0 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_CMP_CR0 - CMP Control Register 0 (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_cr0 +{ + uint8_t U; + struct _hw_cmp_cr0_bitfields + { + uint8_t HYSTCTR : 2; //!< [1:0] Comparator hard block hysteresis + //! control + uint8_t RESERVED0 : 2; //!< [3:2] + uint8_t FILTER_CNT : 3; //!< [6:4] Filter Sample Count + uint8_t RESERVED1 : 1; //!< [7] + } B; +} hw_cmp_cr0_t; +#endif + +/*! + * @name Constants and macros for entire CMP_CR0 register + */ +//@{ +#define HW_CMP_CR0_ADDR(x) (REGS_CMP_BASE(x) + 0x0U) + +#ifndef __LANGUAGE_ASM__ +#define HW_CMP_CR0(x) (*(__IO hw_cmp_cr0_t *) HW_CMP_CR0_ADDR(x)) +#define HW_CMP_CR0_RD(x) (HW_CMP_CR0(x).U) +#define HW_CMP_CR0_WR(x, v) (HW_CMP_CR0(x).U = (v)) +#define HW_CMP_CR0_SET(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) | (v))) +#define HW_CMP_CR0_CLR(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) & ~(v))) +#define HW_CMP_CR0_TOG(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual CMP_CR0 bitfields + */ + +/*! + * @name Register CMP_CR0, field HYSTCTR[1:0] (RW) + * + * Defines the programmable hysteresis level. The hysteresis values associated + * with each level are device-specific. See the Data Sheet of the device for the + * exact values. + * + * Values: + * - 00 - Level 0 + * - 01 - Level 1 + * - 10 - Level 2 + * - 11 - Level 3 + */ +//@{ +#define BP_CMP_CR0_HYSTCTR (0U) //!< Bit position for CMP_CR0_HYSTCTR. +#define BM_CMP_CR0_HYSTCTR (0x03U) //!< Bit mask for CMP_CR0_HYSTCTR. +#define BS_CMP_CR0_HYSTCTR (2U) //!< Bit field size in bits for CMP_CR0_HYSTCTR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_CR0_HYSTCTR field. +#define BR_CMP_CR0_HYSTCTR(x) (HW_CMP_CR0(x).B.HYSTCTR) +#endif + +//! @brief Format value for bitfield CMP_CR0_HYSTCTR. +#define BF_CMP_CR0_HYSTCTR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR0_HYSTCTR), uint8_t) & BM_CMP_CR0_HYSTCTR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the HYSTCTR field to a new value. +#define BW_CMP_CR0_HYSTCTR(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_HYSTCTR) | BF_CMP_CR0_HYSTCTR(v))) +#endif +//@} + +/*! + * @name Register CMP_CR0, field FILTER_CNT[6:4] (RW) + * + * Represents the number of consecutive samples that must agree prior to the + * comparator ouput filter accepting a new output state. For information regarding + * filter programming and latency, see the Functional descriptionThe CMP module + * can be used to compare two analog input voltages applied to INP and INM. . + * + * Values: + * - 000 - Filter is disabled. If SE = 1, then COUT is a logic 0. This is not a + * legal state, and is not recommended. If SE = 0, COUT = COUTA. + * - 001 - One sample must agree. The comparator output is simply sampled. + * - 010 - 2 consecutive samples must agree. + * - 011 - 3 consecutive samples must agree. + * - 100 - 4 consecutive samples must agree. + * - 101 - 5 consecutive samples must agree. + * - 110 - 6 consecutive samples must agree. + * - 111 - 7 consecutive samples must agree. + */ +//@{ +#define BP_CMP_CR0_FILTER_CNT (4U) //!< Bit position for CMP_CR0_FILTER_CNT. +#define BM_CMP_CR0_FILTER_CNT (0x70U) //!< Bit mask for CMP_CR0_FILTER_CNT. +#define BS_CMP_CR0_FILTER_CNT (3U) //!< Bit field size in bits for CMP_CR0_FILTER_CNT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_CR0_FILTER_CNT field. +#define BR_CMP_CR0_FILTER_CNT(x) (HW_CMP_CR0(x).B.FILTER_CNT) +#endif + +//! @brief Format value for bitfield CMP_CR0_FILTER_CNT. +#define BF_CMP_CR0_FILTER_CNT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR0_FILTER_CNT), uint8_t) & BM_CMP_CR0_FILTER_CNT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FILTER_CNT field to a new value. +#define BW_CMP_CR0_FILTER_CNT(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_FILTER_CNT) | BF_CMP_CR0_FILTER_CNT(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_CMP_CR1 - CMP Control Register 1 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_CMP_CR1 - CMP Control Register 1 (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_cr1 +{ + uint8_t U; + struct _hw_cmp_cr1_bitfields + { + uint8_t EN : 1; //!< [0] Comparator Module Enable + uint8_t OPE : 1; //!< [1] Comparator Output Pin Enable + uint8_t COS : 1; //!< [2] Comparator Output Select + uint8_t INV : 1; //!< [3] Comparator INVERT + uint8_t PMODE : 1; //!< [4] Power Mode Select + uint8_t RESERVED0 : 1; //!< [5] + uint8_t WE : 1; //!< [6] Windowing Enable + uint8_t SE : 1; //!< [7] Sample Enable + } B; +} hw_cmp_cr1_t; +#endif + +/*! + * @name Constants and macros for entire CMP_CR1 register + */ +//@{ +#define HW_CMP_CR1_ADDR(x) (REGS_CMP_BASE(x) + 0x1U) + +#ifndef __LANGUAGE_ASM__ +#define HW_CMP_CR1(x) (*(__IO hw_cmp_cr1_t *) HW_CMP_CR1_ADDR(x)) +#define HW_CMP_CR1_RD(x) (HW_CMP_CR1(x).U) +#define HW_CMP_CR1_WR(x, v) (HW_CMP_CR1(x).U = (v)) +#define HW_CMP_CR1_SET(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) | (v))) +#define HW_CMP_CR1_CLR(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) & ~(v))) +#define HW_CMP_CR1_TOG(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual CMP_CR1 bitfields + */ + +/*! + * @name Register CMP_CR1, field EN[0] (RW) + * + * Enables the Analog Comparator module. When the module is not enabled, it + * remains in the off state, and consumes no power. When the user selects the same + * input from analog mux to the positive and negative port, the comparator is + * disabled automatically. + * + * Values: + * - 0 - Analog Comparator is disabled. + * - 1 - Analog Comparator is enabled. + */ +//@{ +#define BP_CMP_CR1_EN (0U) //!< Bit position for CMP_CR1_EN. +#define BM_CMP_CR1_EN (0x01U) //!< Bit mask for CMP_CR1_EN. +#define BS_CMP_CR1_EN (1U) //!< Bit field size in bits for CMP_CR1_EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_CR1_EN field. +#define BR_CMP_CR1_EN(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN)) +#endif + +//! @brief Format value for bitfield CMP_CR1_EN. +#define BF_CMP_CR1_EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_EN), uint8_t) & BM_CMP_CR1_EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the EN field to a new value. +#define BW_CMP_CR1_EN(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN) = (v)) +#endif +//@} + +/*! + * @name Register CMP_CR1, field OPE[1] (RW) + * + * Values: + * - 0 - CMPO is not available on the associated CMPO output pin. If the + * comparator does not own the pin, this field has no effect. + * - 1 - CMPO is available on the associated CMPO output pin. The comparator + * output (CMPO) is driven out on the associated CMPO output pin if the + * comparator owns the pin. If the comparator does not own the field, this bit has no + * effect. + */ +//@{ +#define BP_CMP_CR1_OPE (1U) //!< Bit position for CMP_CR1_OPE. +#define BM_CMP_CR1_OPE (0x02U) //!< Bit mask for CMP_CR1_OPE. +#define BS_CMP_CR1_OPE (1U) //!< Bit field size in bits for CMP_CR1_OPE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_CR1_OPE field. +#define BR_CMP_CR1_OPE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE)) +#endif + +//! @brief Format value for bitfield CMP_CR1_OPE. +#define BF_CMP_CR1_OPE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_OPE), uint8_t) & BM_CMP_CR1_OPE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the OPE field to a new value. +#define BW_CMP_CR1_OPE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE) = (v)) +#endif +//@} + +/*! + * @name Register CMP_CR1, field COS[2] (RW) + * + * Values: + * - 0 - Set the filtered comparator output (CMPO) to equal COUT. + * - 1 - Set the unfiltered comparator output (CMPO) to equal COUTA. + */ +//@{ +#define BP_CMP_CR1_COS (2U) //!< Bit position for CMP_CR1_COS. +#define BM_CMP_CR1_COS (0x04U) //!< Bit mask for CMP_CR1_COS. +#define BS_CMP_CR1_COS (1U) //!< Bit field size in bits for CMP_CR1_COS. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_CR1_COS field. +#define BR_CMP_CR1_COS(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS)) +#endif + +//! @brief Format value for bitfield CMP_CR1_COS. +#define BF_CMP_CR1_COS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_COS), uint8_t) & BM_CMP_CR1_COS) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COS field to a new value. +#define BW_CMP_CR1_COS(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS) = (v)) +#endif +//@} + +/*! + * @name Register CMP_CR1, field INV[3] (RW) + * + * Allows selection of the polarity of the analog comparator function. It is + * also driven to the COUT output, on both the device pin and as SCR[COUT], when + * OPE=0. + * + * Values: + * - 0 - Does not invert the comparator output. + * - 1 - Inverts the comparator output. + */ +//@{ +#define BP_CMP_CR1_INV (3U) //!< Bit position for CMP_CR1_INV. +#define BM_CMP_CR1_INV (0x08U) //!< Bit mask for CMP_CR1_INV. +#define BS_CMP_CR1_INV (1U) //!< Bit field size in bits for CMP_CR1_INV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_CR1_INV field. +#define BR_CMP_CR1_INV(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV)) +#endif + +//! @brief Format value for bitfield CMP_CR1_INV. +#define BF_CMP_CR1_INV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_INV), uint8_t) & BM_CMP_CR1_INV) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the INV field to a new value. +#define BW_CMP_CR1_INV(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV) = (v)) +#endif +//@} + +/*! + * @name Register CMP_CR1, field PMODE[4] (RW) + * + * See the electrical specifications table in the device Data Sheet for details. + * + * Values: + * - 0 - Low-Speed (LS) Comparison mode selected. In this mode, CMP has slower + * output propagation delay and lower current consumption. + * - 1 - High-Speed (HS) Comparison mode selected. In this mode, CMP has faster + * output propagation delay and higher current consumption. + */ +//@{ +#define BP_CMP_CR1_PMODE (4U) //!< Bit position for CMP_CR1_PMODE. +#define BM_CMP_CR1_PMODE (0x10U) //!< Bit mask for CMP_CR1_PMODE. +#define BS_CMP_CR1_PMODE (1U) //!< Bit field size in bits for CMP_CR1_PMODE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_CR1_PMODE field. +#define BR_CMP_CR1_PMODE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE)) +#endif + +//! @brief Format value for bitfield CMP_CR1_PMODE. +#define BF_CMP_CR1_PMODE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_PMODE), uint8_t) & BM_CMP_CR1_PMODE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PMODE field to a new value. +#define BW_CMP_CR1_PMODE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE) = (v)) +#endif +//@} + +/*! + * @name Register CMP_CR1, field WE[6] (RW) + * + * At any given time, either SE or WE can be set. If a write to this register + * attempts to set both, then SE is set and WE is cleared. However, avoid writing + * 1s to both field locations because this "11" case is reserved and may change in + * future implementations. + * + * Values: + * - 0 - Windowing mode is not selected. + * - 1 - Windowing mode is selected. + */ +//@{ +#define BP_CMP_CR1_WE (6U) //!< Bit position for CMP_CR1_WE. +#define BM_CMP_CR1_WE (0x40U) //!< Bit mask for CMP_CR1_WE. +#define BS_CMP_CR1_WE (1U) //!< Bit field size in bits for CMP_CR1_WE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_CR1_WE field. +#define BR_CMP_CR1_WE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE)) +#endif + +//! @brief Format value for bitfield CMP_CR1_WE. +#define BF_CMP_CR1_WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_WE), uint8_t) & BM_CMP_CR1_WE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WE field to a new value. +#define BW_CMP_CR1_WE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE) = (v)) +#endif +//@} + +/*! + * @name Register CMP_CR1, field SE[7] (RW) + * + * At any given time, either SE or WE can be set. If a write to this register + * attempts to set both, then SE is set and WE is cleared. However, avoid writing + * 1s to both field locations because this "11" case is reserved and may change in + * future implementations. + * + * Values: + * - 0 - Sampling mode is not selected. + * - 1 - Sampling mode is selected. + */ +//@{ +#define BP_CMP_CR1_SE (7U) //!< Bit position for CMP_CR1_SE. +#define BM_CMP_CR1_SE (0x80U) //!< Bit mask for CMP_CR1_SE. +#define BS_CMP_CR1_SE (1U) //!< Bit field size in bits for CMP_CR1_SE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_CR1_SE field. +#define BR_CMP_CR1_SE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE)) +#endif + +//! @brief Format value for bitfield CMP_CR1_SE. +#define BF_CMP_CR1_SE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_SE), uint8_t) & BM_CMP_CR1_SE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SE field to a new value. +#define BW_CMP_CR1_SE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_CMP_FPR - CMP Filter Period Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_CMP_FPR - CMP Filter Period Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_fpr +{ + uint8_t U; + struct _hw_cmp_fpr_bitfields + { + uint8_t FILT_PER : 8; //!< [7:0] Filter Sample Period + } B; +} hw_cmp_fpr_t; +#endif + +/*! + * @name Constants and macros for entire CMP_FPR register + */ +//@{ +#define HW_CMP_FPR_ADDR(x) (REGS_CMP_BASE(x) + 0x2U) + +#ifndef __LANGUAGE_ASM__ +#define HW_CMP_FPR(x) (*(__IO hw_cmp_fpr_t *) HW_CMP_FPR_ADDR(x)) +#define HW_CMP_FPR_RD(x) (HW_CMP_FPR(x).U) +#define HW_CMP_FPR_WR(x, v) (HW_CMP_FPR(x).U = (v)) +#define HW_CMP_FPR_SET(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) | (v))) +#define HW_CMP_FPR_CLR(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) & ~(v))) +#define HW_CMP_FPR_TOG(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual CMP_FPR bitfields + */ + +/*! + * @name Register CMP_FPR, field FILT_PER[7:0] (RW) + * + * Specifies the sampling period, in bus clock cycles, of the comparator output + * filter, when CR1[SE]=0. Setting FILT_PER to 0x0 disables the filter. Filter + * programming and latency details appear in the Functional descriptionThe CMP + * module can be used to compare two analog input voltages applied to INP and INM. . + * This field has no effect when CR1[SE]=1. In that case, the external SAMPLE + * signal is used to determine the sampling period. + */ +//@{ +#define BP_CMP_FPR_FILT_PER (0U) //!< Bit position for CMP_FPR_FILT_PER. +#define BM_CMP_FPR_FILT_PER (0xFFU) //!< Bit mask for CMP_FPR_FILT_PER. +#define BS_CMP_FPR_FILT_PER (8U) //!< Bit field size in bits for CMP_FPR_FILT_PER. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_FPR_FILT_PER field. +#define BR_CMP_FPR_FILT_PER(x) (HW_CMP_FPR(x).U) +#endif + +//! @brief Format value for bitfield CMP_FPR_FILT_PER. +#define BF_CMP_FPR_FILT_PER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_FPR_FILT_PER), uint8_t) & BM_CMP_FPR_FILT_PER) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FILT_PER field to a new value. +#define BW_CMP_FPR_FILT_PER(x, v) (HW_CMP_FPR_WR(x, v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_CMP_SCR - CMP Status and Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_CMP_SCR - CMP Status and Control Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_scr +{ + uint8_t U; + struct _hw_cmp_scr_bitfields + { + uint8_t COUT : 1; //!< [0] Analog Comparator Output + uint8_t CFF : 1; //!< [1] Analog Comparator Flag Falling + uint8_t CFR : 1; //!< [2] Analog Comparator Flag Rising + uint8_t IEF : 1; //!< [3] Comparator Interrupt Enable Falling + uint8_t IER : 1; //!< [4] Comparator Interrupt Enable Rising + uint8_t RESERVED0 : 1; //!< [5] + uint8_t DMAEN : 1; //!< [6] DMA Enable Control + uint8_t RESERVED1 : 1; //!< [7] + } B; +} hw_cmp_scr_t; +#endif + +/*! + * @name Constants and macros for entire CMP_SCR register + */ +//@{ +#define HW_CMP_SCR_ADDR(x) (REGS_CMP_BASE(x) + 0x3U) + +#ifndef __LANGUAGE_ASM__ +#define HW_CMP_SCR(x) (*(__IO hw_cmp_scr_t *) HW_CMP_SCR_ADDR(x)) +#define HW_CMP_SCR_RD(x) (HW_CMP_SCR(x).U) +#define HW_CMP_SCR_WR(x, v) (HW_CMP_SCR(x).U = (v)) +#define HW_CMP_SCR_SET(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) | (v))) +#define HW_CMP_SCR_CLR(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) & ~(v))) +#define HW_CMP_SCR_TOG(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual CMP_SCR bitfields + */ + +/*! + * @name Register CMP_SCR, field COUT[0] (RO) + * + * Returns the current value of the Analog Comparator output, when read. The + * field is reset to 0 and will read as CR1[INV] when the Analog Comparator module + * is disabled, that is, when CR1[EN] = 0. Writes to this field are ignored. + */ +//@{ +#define BP_CMP_SCR_COUT (0U) //!< Bit position for CMP_SCR_COUT. +#define BM_CMP_SCR_COUT (0x01U) //!< Bit mask for CMP_SCR_COUT. +#define BS_CMP_SCR_COUT (1U) //!< Bit field size in bits for CMP_SCR_COUT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_SCR_COUT field. +#define BR_CMP_SCR_COUT(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_COUT)) +#endif +//@} + +/*! + * @name Register CMP_SCR, field CFF[1] (W1C) + * + * Detects a falling-edge on COUT, when set, during normal operation. CFF is + * cleared by writing 1 to it. During Stop modes, CFF is level sensitive is edge + * sensitive . + * + * Values: + * - 0 - Falling-edge on COUT has not been detected. + * - 1 - Falling-edge on COUT has occurred. + */ +//@{ +#define BP_CMP_SCR_CFF (1U) //!< Bit position for CMP_SCR_CFF. +#define BM_CMP_SCR_CFF (0x02U) //!< Bit mask for CMP_SCR_CFF. +#define BS_CMP_SCR_CFF (1U) //!< Bit field size in bits for CMP_SCR_CFF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_SCR_CFF field. +#define BR_CMP_SCR_CFF(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF)) +#endif + +//! @brief Format value for bitfield CMP_SCR_CFF. +#define BF_CMP_SCR_CFF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_CFF), uint8_t) & BM_CMP_SCR_CFF) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CFF field to a new value. +#define BW_CMP_SCR_CFF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF) = (v)) +#endif +//@} + +/*! + * @name Register CMP_SCR, field CFR[2] (W1C) + * + * Detects a rising-edge on COUT, when set, during normal operation. CFR is + * cleared by writing 1 to it. During Stop modes, CFR is level sensitive is edge + * sensitive . + * + * Values: + * - 0 - Rising-edge on COUT has not been detected. + * - 1 - Rising-edge on COUT has occurred. + */ +//@{ +#define BP_CMP_SCR_CFR (2U) //!< Bit position for CMP_SCR_CFR. +#define BM_CMP_SCR_CFR (0x04U) //!< Bit mask for CMP_SCR_CFR. +#define BS_CMP_SCR_CFR (1U) //!< Bit field size in bits for CMP_SCR_CFR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_SCR_CFR field. +#define BR_CMP_SCR_CFR(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR)) +#endif + +//! @brief Format value for bitfield CMP_SCR_CFR. +#define BF_CMP_SCR_CFR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_CFR), uint8_t) & BM_CMP_SCR_CFR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CFR field to a new value. +#define BW_CMP_SCR_CFR(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR) = (v)) +#endif +//@} + +/*! + * @name Register CMP_SCR, field IEF[3] (RW) + * + * Enables the CFF interrupt from the CMP. When this field is set, an interrupt + * will be asserted when CFF is set. + * + * Values: + * - 0 - Interrupt is disabled. + * - 1 - Interrupt is enabled. + */ +//@{ +#define BP_CMP_SCR_IEF (3U) //!< Bit position for CMP_SCR_IEF. +#define BM_CMP_SCR_IEF (0x08U) //!< Bit mask for CMP_SCR_IEF. +#define BS_CMP_SCR_IEF (1U) //!< Bit field size in bits for CMP_SCR_IEF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_SCR_IEF field. +#define BR_CMP_SCR_IEF(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF)) +#endif + +//! @brief Format value for bitfield CMP_SCR_IEF. +#define BF_CMP_SCR_IEF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_IEF), uint8_t) & BM_CMP_SCR_IEF) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the IEF field to a new value. +#define BW_CMP_SCR_IEF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF) = (v)) +#endif +//@} + +/*! + * @name Register CMP_SCR, field IER[4] (RW) + * + * Enables the CFR interrupt from the CMP. When this field is set, an interrupt + * will be asserted when CFR is set. + * + * Values: + * - 0 - Interrupt is disabled. + * - 1 - Interrupt is enabled. + */ +//@{ +#define BP_CMP_SCR_IER (4U) //!< Bit position for CMP_SCR_IER. +#define BM_CMP_SCR_IER (0x10U) //!< Bit mask for CMP_SCR_IER. +#define BS_CMP_SCR_IER (1U) //!< Bit field size in bits for CMP_SCR_IER. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_SCR_IER field. +#define BR_CMP_SCR_IER(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER)) +#endif + +//! @brief Format value for bitfield CMP_SCR_IER. +#define BF_CMP_SCR_IER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_IER), uint8_t) & BM_CMP_SCR_IER) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the IER field to a new value. +#define BW_CMP_SCR_IER(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER) = (v)) +#endif +//@} + +/*! + * @name Register CMP_SCR, field DMAEN[6] (RW) + * + * Enables the DMA transfer triggered from the CMP module. When this field is + * set, a DMA request is asserted when CFR or CFF is set. + * + * Values: + * - 0 - DMA is disabled. + * - 1 - DMA is enabled. + */ +//@{ +#define BP_CMP_SCR_DMAEN (6U) //!< Bit position for CMP_SCR_DMAEN. +#define BM_CMP_SCR_DMAEN (0x40U) //!< Bit mask for CMP_SCR_DMAEN. +#define BS_CMP_SCR_DMAEN (1U) //!< Bit field size in bits for CMP_SCR_DMAEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_SCR_DMAEN field. +#define BR_CMP_SCR_DMAEN(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN)) +#endif + +//! @brief Format value for bitfield CMP_SCR_DMAEN. +#define BF_CMP_SCR_DMAEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_DMAEN), uint8_t) & BM_CMP_SCR_DMAEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DMAEN field to a new value. +#define BW_CMP_SCR_DMAEN(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_CMP_DACCR - DAC Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_CMP_DACCR - DAC Control Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_daccr +{ + uint8_t U; + struct _hw_cmp_daccr_bitfields + { + uint8_t VOSEL : 6; //!< [5:0] DAC Output Voltage Select + uint8_t VRSEL : 1; //!< [6] Supply Voltage Reference Source Select + uint8_t DACEN : 1; //!< [7] DAC Enable + } B; +} hw_cmp_daccr_t; +#endif + +/*! + * @name Constants and macros for entire CMP_DACCR register + */ +//@{ +#define HW_CMP_DACCR_ADDR(x) (REGS_CMP_BASE(x) + 0x4U) + +#ifndef __LANGUAGE_ASM__ +#define HW_CMP_DACCR(x) (*(__IO hw_cmp_daccr_t *) HW_CMP_DACCR_ADDR(x)) +#define HW_CMP_DACCR_RD(x) (HW_CMP_DACCR(x).U) +#define HW_CMP_DACCR_WR(x, v) (HW_CMP_DACCR(x).U = (v)) +#define HW_CMP_DACCR_SET(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) | (v))) +#define HW_CMP_DACCR_CLR(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) & ~(v))) +#define HW_CMP_DACCR_TOG(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual CMP_DACCR bitfields + */ + +/*! + * @name Register CMP_DACCR, field VOSEL[5:0] (RW) + * + * Selects an output voltage from one of 64 distinct levels. DACO = (V in /64) * + * (VOSEL[5:0] + 1) , so the DACO range is from V in /64 to V in . + */ +//@{ +#define BP_CMP_DACCR_VOSEL (0U) //!< Bit position for CMP_DACCR_VOSEL. +#define BM_CMP_DACCR_VOSEL (0x3FU) //!< Bit mask for CMP_DACCR_VOSEL. +#define BS_CMP_DACCR_VOSEL (6U) //!< Bit field size in bits for CMP_DACCR_VOSEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_DACCR_VOSEL field. +#define BR_CMP_DACCR_VOSEL(x) (HW_CMP_DACCR(x).B.VOSEL) +#endif + +//! @brief Format value for bitfield CMP_DACCR_VOSEL. +#define BF_CMP_DACCR_VOSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_DACCR_VOSEL), uint8_t) & BM_CMP_DACCR_VOSEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the VOSEL field to a new value. +#define BW_CMP_DACCR_VOSEL(x, v) (HW_CMP_DACCR_WR(x, (HW_CMP_DACCR_RD(x) & ~BM_CMP_DACCR_VOSEL) | BF_CMP_DACCR_VOSEL(v))) +#endif +//@} + +/*! + * @name Register CMP_DACCR, field VRSEL[6] (RW) + * + * Values: + * - 0 - V is selected as resistor ladder network supply reference V. in1 in + * - 1 - V is selected as resistor ladder network supply reference V. in2 in + */ +//@{ +#define BP_CMP_DACCR_VRSEL (6U) //!< Bit position for CMP_DACCR_VRSEL. +#define BM_CMP_DACCR_VRSEL (0x40U) //!< Bit mask for CMP_DACCR_VRSEL. +#define BS_CMP_DACCR_VRSEL (1U) //!< Bit field size in bits for CMP_DACCR_VRSEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_DACCR_VRSEL field. +#define BR_CMP_DACCR_VRSEL(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL)) +#endif + +//! @brief Format value for bitfield CMP_DACCR_VRSEL. +#define BF_CMP_DACCR_VRSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_DACCR_VRSEL), uint8_t) & BM_CMP_DACCR_VRSEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the VRSEL field to a new value. +#define BW_CMP_DACCR_VRSEL(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL) = (v)) +#endif +//@} + +/*! + * @name Register CMP_DACCR, field DACEN[7] (RW) + * + * Enables the DAC. When the DAC is disabled, it is powered down to conserve + * power. + * + * Values: + * - 0 - DAC is disabled. + * - 1 - DAC is enabled. + */ +//@{ +#define BP_CMP_DACCR_DACEN (7U) //!< Bit position for CMP_DACCR_DACEN. +#define BM_CMP_DACCR_DACEN (0x80U) //!< Bit mask for CMP_DACCR_DACEN. +#define BS_CMP_DACCR_DACEN (1U) //!< Bit field size in bits for CMP_DACCR_DACEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_DACCR_DACEN field. +#define BR_CMP_DACCR_DACEN(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN)) +#endif + +//! @brief Format value for bitfield CMP_DACCR_DACEN. +#define BF_CMP_DACCR_DACEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_DACCR_DACEN), uint8_t) & BM_CMP_DACCR_DACEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DACEN field to a new value. +#define BW_CMP_DACCR_DACEN(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_CMP_MUXCR - MUX Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_CMP_MUXCR - MUX Control Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_muxcr +{ + uint8_t U; + struct _hw_cmp_muxcr_bitfields + { + uint8_t MSEL : 3; //!< [2:0] Minus Input Mux Control + uint8_t PSEL : 3; //!< [5:3] Plus Input Mux Control + uint8_t RESERVED0 : 1; //!< [6] + uint8_t PSTM : 1; //!< [7] Pass Through Mode Enable + } B; +} hw_cmp_muxcr_t; +#endif + +/*! + * @name Constants and macros for entire CMP_MUXCR register + */ +//@{ +#define HW_CMP_MUXCR_ADDR(x) (REGS_CMP_BASE(x) + 0x5U) + +#ifndef __LANGUAGE_ASM__ +#define HW_CMP_MUXCR(x) (*(__IO hw_cmp_muxcr_t *) HW_CMP_MUXCR_ADDR(x)) +#define HW_CMP_MUXCR_RD(x) (HW_CMP_MUXCR(x).U) +#define HW_CMP_MUXCR_WR(x, v) (HW_CMP_MUXCR(x).U = (v)) +#define HW_CMP_MUXCR_SET(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) | (v))) +#define HW_CMP_MUXCR_CLR(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) & ~(v))) +#define HW_CMP_MUXCR_TOG(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual CMP_MUXCR bitfields + */ + +/*! + * @name Register CMP_MUXCR, field MSEL[2:0] (RW) + * + * Determines which input is selected for the minus input of the comparator. For + * INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate + * operation selects the same input for both muxes, the comparator automatically + * shuts down to prevent itself from becoming a noise generator. + * + * Values: + * - 000 - IN0 + * - 001 - IN1 + * - 010 - IN2 + * - 011 - IN3 + * - 100 - IN4 + * - 101 - IN5 + * - 110 - IN6 + * - 111 - IN7 + */ +//@{ +#define BP_CMP_MUXCR_MSEL (0U) //!< Bit position for CMP_MUXCR_MSEL. +#define BM_CMP_MUXCR_MSEL (0x07U) //!< Bit mask for CMP_MUXCR_MSEL. +#define BS_CMP_MUXCR_MSEL (3U) //!< Bit field size in bits for CMP_MUXCR_MSEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_MUXCR_MSEL field. +#define BR_CMP_MUXCR_MSEL(x) (HW_CMP_MUXCR(x).B.MSEL) +#endif + +//! @brief Format value for bitfield CMP_MUXCR_MSEL. +#define BF_CMP_MUXCR_MSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_MUXCR_MSEL), uint8_t) & BM_CMP_MUXCR_MSEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the MSEL field to a new value. +#define BW_CMP_MUXCR_MSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_MSEL) | BF_CMP_MUXCR_MSEL(v))) +#endif +//@} + +/*! + * @name Register CMP_MUXCR, field PSEL[5:3] (RW) + * + * Determines which input is selected for the plus input of the comparator. For + * INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate + * operation selects the same input for both muxes, the comparator automatically + * shuts down to prevent itself from becoming a noise generator. + * + * Values: + * - 000 - IN0 + * - 001 - IN1 + * - 010 - IN2 + * - 011 - IN3 + * - 100 - IN4 + * - 101 - IN5 + * - 110 - IN6 + * - 111 - IN7 + */ +//@{ +#define BP_CMP_MUXCR_PSEL (3U) //!< Bit position for CMP_MUXCR_PSEL. +#define BM_CMP_MUXCR_PSEL (0x38U) //!< Bit mask for CMP_MUXCR_PSEL. +#define BS_CMP_MUXCR_PSEL (3U) //!< Bit field size in bits for CMP_MUXCR_PSEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_MUXCR_PSEL field. +#define BR_CMP_MUXCR_PSEL(x) (HW_CMP_MUXCR(x).B.PSEL) +#endif + +//! @brief Format value for bitfield CMP_MUXCR_PSEL. +#define BF_CMP_MUXCR_PSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_MUXCR_PSEL), uint8_t) & BM_CMP_MUXCR_PSEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PSEL field to a new value. +#define BW_CMP_MUXCR_PSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_PSEL) | BF_CMP_MUXCR_PSEL(v))) +#endif +//@} + +/*! + * @name Register CMP_MUXCR, field PSTM[7] (RW) + * + * This bit is used to enable to MUX pass through mode. Pass through mode is + * always available but for some devices this feature must be always disabled due to + * the lack of package pins. + * + * Values: + * - 0 - Pass Through Mode is disabled. + * - 1 - Pass Through Mode is enabled. + */ +//@{ +#define BP_CMP_MUXCR_PSTM (7U) //!< Bit position for CMP_MUXCR_PSTM. +#define BM_CMP_MUXCR_PSTM (0x80U) //!< Bit mask for CMP_MUXCR_PSTM. +#define BS_CMP_MUXCR_PSTM (1U) //!< Bit field size in bits for CMP_MUXCR_PSTM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the CMP_MUXCR_PSTM field. +#define BR_CMP_MUXCR_PSTM(x) (BITBAND_ACCESS8(HW_CMP_MUXCR_ADDR(x), BP_CMP_MUXCR_PSTM)) +#endif + +//! @brief Format value for bitfield CMP_MUXCR_PSTM. +#define BF_CMP_MUXCR_PSTM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_MUXCR_PSTM), uint8_t) & BM_CMP_MUXCR_PSTM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PSTM field to a new value. +#define BW_CMP_MUXCR_PSTM(x, v) (BITBAND_ACCESS8(HW_CMP_MUXCR_ADDR(x), BP_CMP_MUXCR_PSTM) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// hw_cmp_t - module struct +//------------------------------------------------------------------------------------------- +/*! + * @brief All CMP module registers. + */ +#ifndef __LANGUAGE_ASM__ +#pragma pack(1) +typedef struct _hw_cmp +{ + __IO hw_cmp_cr0_t CR0; //!< [0x0] CMP Control Register 0 + __IO hw_cmp_cr1_t CR1; //!< [0x1] CMP Control Register 1 + __IO hw_cmp_fpr_t FPR; //!< [0x2] CMP Filter Period Register + __IO hw_cmp_scr_t SCR; //!< [0x3] CMP Status and Control Register + __IO hw_cmp_daccr_t DACCR; //!< [0x4] DAC Control Register + __IO hw_cmp_muxcr_t MUXCR; //!< [0x5] MUX Control Register +} hw_cmp_t; +#pragma pack() + +//! @brief Macro to access all CMP registers. +//! @param x CMP instance number. +//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, +//! use the '&' operator, like <code>&HW_CMP(0)</code>. +#define HW_CMP(x) (*(hw_cmp_t *) REGS_CMP_BASE(x)) +#endif + +#endif // __HW_CMP_REGISTERS_H__ +// v22/130726/0.9 +// EOF