mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_rcc_ex.c
- Revision:
- 237:f3da66175598
diff -r 6ac0938ee349 -r f3da66175598 targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_rcc_ex.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_rcc_ex.c Tue Jun 24 14:45:08 2014 +0100 @@ -0,0 +1,622 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_rcc_ex.c + * @author MCD Application Team + * @version V1.0.1 + * @date 18-June-2014 + * @brief Extended RCC HAL module driver + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Clock Source configuration functions + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f3xx_hal.h" + +/** @addtogroup STM32F3xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx + * @brief RCC Extended HAL module driver. + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RCCEx_Private_Functions + * @{ + */ + +/** @defgroup RCCEx_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) and RCC_BDCR register are set to their reset values. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals clocks + * (ADC, CEC, I2C, I2S, SDADC, HRTIM, TIM, USART, RTC and USB). + * + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) and RCC_BDCR register are set to their reset values. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLK(PeriphClkInit->PeriphClockSelection)); + + + /*---------------------------- RTC configuration -------------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + { + /* Enable Power Clock*/ + __PWR_CLK_ENABLE(); + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while((PWR->CR & PWR_CR_DBP) == RESET) + { + if((HAL_GetTick()-tickstart) > DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset the Backup domain only if the RTC Clock source selction is modified */ + if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg; + } + + /* If LSE is selected as RTC clock source, wait for LSE reactivation */ + if(PeriphClkInit->RTCClockSelection == RCC_RTCCLKSOURCE_LSE) + { + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick()-tickstart) > LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + + /*------------------------------- USART1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + + /*----------------------------- USART2 Configuration --------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) + { + /* Check the parameters */ + assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); + + /* Configure the USART2 clock source */ + __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); + } + + /*------------------------------ USART3 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) + { + /* Check the parameters */ + assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); + + /* Configure the USART3 clock source */ + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + } + + /*------------------------------ I2C1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + } + +#if defined(STM32F302x8) || defined(STM32F302xC) || \ + defined(STM32F303xC) || defined(STM32F373xC) + + /*------------------------------ USB Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + /* Check the parameters */ + assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->USBClockSelection)); + + /* Configure the USB clock source */ + __HAL_RCC_USB_CONFIG(PeriphClkInit->USBClockSelection); + } + +#endif /* STM32F302x8 || STM32F302xC || */ + /* STM32F303xC || STM32F373xC */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \ + defined(STM32F373xC) || defined(STM32F378xx) + + /*------------------------------ I2C2 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); + + /* Configure the I2C2 clock source */ + __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); + } + +#endif + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) + + /*------------------------------ I2C3 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection)); + + /* Configure the I2C3 clock source */ + __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection); + } + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */ + +#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) + + /*------------------------------ UART4 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) + { + /* Check the parameters */ + assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection)); + + /* Configure the UART4 clock source */ + __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection); + } + + /*------------------------------ UART5 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) + { + /* Check the parameters */ + assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection)); + + /* Configure the UART5 clock source */ + __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection); + } + +#endif /* STM32F302xC || STM32F303xC || STM32F358xx */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) + + /*------------------------------ I2S Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) + { + /* Check the parameters */ + assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection)); + + /* Configure the I2S clock source */ + __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection); + } + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || STM32F302xC || STM32F303xC || STM32F358xx */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) + + /*------------------------------ ADC1 clock Configuration ------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC1) == RCC_PERIPHCLK_ADC1) + { + /* Check the parameters */ + assert_param(IS_RCC_ADC1PLLCLK_DIV(PeriphClkInit->Adc1ClockSelection)); + + /* Configure the ADC1 clock source */ + __HAL_RCC_ADC1_CONFIG(PeriphClkInit->Adc1ClockSelection); + } + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */ + +#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \ + defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) + + /*------------------------------ ADC1 & ADC2 clock Configuration -------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC12) == RCC_PERIPHCLK_ADC12) + { + /* Check the parameters */ + assert_param(IS_RCC_ADC12PLLCLK_DIV(PeriphClkInit->Adc12ClockSelection)); + + /* Configure the ADC12 clock source */ + __HAL_RCC_ADC12_CONFIG(PeriphClkInit->Adc12ClockSelection); + } + +#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */ + /* STM32F303x8 || STM32F334x8 || STM32F328xx */ + +#if defined(STM32F303xC) || defined(STM32F358xx) + + /*------------------------------ ADC3 & ADC4 clock Configuration -------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC34) == RCC_PERIPHCLK_ADC34) + { + /* Check the parameters */ + assert_param(IS_RCC_ADC34PLLCLK_DIV(PeriphClkInit->Adc34ClockSelection)); + + /* Configure the ADC34 clock source */ + __HAL_RCC_ADC34_CONFIG(PeriphClkInit->Adc34ClockSelection); + } + +#endif /* STM32F303xC || STM32F358xx */ + +#if defined(STM32F373xC) || defined(STM32F378xx) + + /*------------------------------ ADC1 clock Configuration ------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC1) == RCC_PERIPHCLK_ADC1) + { + /* Check the parameters */ + assert_param(IS_RCC_ADC1PCLK2_DIV(PeriphClkInit->Adc1ClockSelection)); + + /* Configure the ADC1 clock source */ + __HAL_RCC_ADC1_CONFIG(PeriphClkInit->Adc1ClockSelection); + } + +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \ + defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) + + /*------------------------------ TIM1 clock Configuration ----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM1CLKSOURCE(PeriphClkInit->Tim1ClockSelection)); + + /* Configure the TIM1 clock source */ + __HAL_RCC_TIM1_CONFIG(PeriphClkInit->Tim1ClockSelection); + } + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */ + /* STM32F302xC || STM32F303xC || STM32F358xx || */ + /* STM32F303x8 || STM32F334x8 || STM32F328xx */ + +#if defined(STM32F303xC) || defined(STM32F358xx) + + /*------------------------------ TIM8 clock Configuration ----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM8) == RCC_PERIPHCLK_TIM8) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM8CLKSOURCE(PeriphClkInit->Tim8ClockSelection)); + + /* Configure the TIM8 clock source */ + __HAL_RCC_TIM8_CONFIG(PeriphClkInit->Tim8ClockSelection); + } + +#endif /* STM32F303xC || STM32F358xx */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) + + /*------------------------------ TIM15 clock Configuration ----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM15CLKSOURCE(PeriphClkInit->Tim15ClockSelection)); + + /* Configure the TIM15 clock source */ + __HAL_RCC_TIM15_CONFIG(PeriphClkInit->Tim15ClockSelection); + } + + /*------------------------------ TIM16 clock Configuration ----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM16) == RCC_PERIPHCLK_TIM16) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM16CLKSOURCE(PeriphClkInit->Tim16ClockSelection)); + + /* Configure the TIM16 clock source */ + __HAL_RCC_TIM16_CONFIG(PeriphClkInit->Tim16ClockSelection); + } + + /*------------------------------ TIM17 clock Configuration ----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM17) == RCC_PERIPHCLK_TIM17) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM17CLKSOURCE(PeriphClkInit->Tim17ClockSelection)); + + /* Configure the TIM17 clock source */ + __HAL_RCC_TIM17_CONFIG(PeriphClkInit->Tim17ClockSelection); + } + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */ + +#if defined(STM32F334x8) + + /*------------------------------ HRTIM1 clock Configuration ----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_HRTIM1) == RCC_PERIPHCLK_HRTIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_HRTIM1CLKSOURCE(PeriphClkInit->Hrtim1ClockSelection)); + + /* Configure the HRTIM1 clock source */ + __HAL_RCC_HRTIM1_CONFIG(PeriphClkInit->Hrtim1ClockSelection); + } + +#endif /* STM32F334x8 */ + +#if defined(STM32F373xC) || defined(STM32F378xx) + + /*------------------------------ SDADC clock Configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDADC) == RCC_PERIPHCLK_SDADC) + { + /* Check the parameters */ + assert_param(IS_RCC_SDADCSYSCLK_DIV(PeriphClkInit->SdadcClockSelection)); + + /* Configure the SDADC clock prescaler */ + __HAL_RCC_SDADC_CONFIG(PeriphClkInit->SdadcClockSelection); + } + + /*------------------------------ CEC clock Configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } + +#endif /* STM32F373xC || STM32F378xx */ + + return HAL_OK; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks + * (ADC, CEC, I2C, I2S, SDADC, HRTIM, TIM, USART, RTC and USB clocks). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + /* Common part first */ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_RTC; + + /* Get the RTC configuration --------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + /* Get the USART1 clock configuration --------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); + /* Get the USART2 clock configuration -----------------------------------------*/ + PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); + /* Get the USART3 clock configuration -----------------------------------------*/ + PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); + /* Get the I2C1 clock configuration -----------------------------------------*/ + PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); + +#if defined(STM32F302x8) || defined(STM32F302xC) || \ + defined(STM32F303xC) || defined(STM32F373xC) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; + /* Get the USB clock configuration -----------------------------------------*/ + PeriphClkInit->USBClockSelection = __HAL_RCC_GET_USB_SOURCE(); + +#endif /* STM32F302x8 || STM32F302xC || */ + /* STM32F303xC || STM32F373xC */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \ + defined(STM32F373xC) || defined(STM32F378xx) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C2; + /* Get the I2C2 clock configuration -----------------------------------------*/ + PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || STM32F302xC || STM32F303xC || STM32F358xx || */ + /* STM32F373xC || STM32F378xx */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C3; + /* Get the I2C3 clock configuration -----------------------------------------*/ + PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE(); + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */ + +#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) + + PeriphClkInit->PeriphClockSelection |= (RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5); + /* Get the UART4 clock configuration -----------------------------------------*/ + PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE(); + /* Get the UART5 clock configuration -----------------------------------------*/ + PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE(); + +#endif /* STM32F302xC || STM32F303xC || STM32F358xx */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S; + /* Get the I2S clock configuration -----------------------------------------*/ + PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2S_SOURCE(); + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || STM32F302xC || STM32F303xC || STM32F358xx */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ + defined(STM32F373xC) || defined(STM32F378xx) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC1; + /* Get the ADC1 clock configuration -----------------------------------------*/ + PeriphClkInit->Adc1ClockSelection = __HAL_RCC_GET_ADC1_SOURCE(); + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || STM32F373xC || STM32F378xx */ + +#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \ + defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC12; + /* Get the ADC1 & ADC2 clock configuration -----------------------------------------*/ + PeriphClkInit->Adc12ClockSelection = __HAL_RCC_GET_ADC12_SOURCE(); + +#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */ + /* STM32F303x8 || STM32F334x8 || STM32F328xx */ + +#if defined(STM32F303xC) || defined(STM32F358xx) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC34; + /* Get the ADC3 & ADC4 clock configuration -----------------------------------------*/ + PeriphClkInit->Adc34ClockSelection = __HAL_RCC_GET_ADC34_SOURCE(); + +#endif /* STM32F303xC || STM32F358xx */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \ + defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM1; + /* Get the TIM1 clock configuration -----------------------------------------*/ + PeriphClkInit->Tim1ClockSelection = __HAL_RCC_GET_TIM1_SOURCE(); + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */ + /* STM32F302xC || STM32F303xC || STM32F358xx || */ + /* STM32F303x8 || STM32F334x8 || STM32F328xx */ + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) + + PeriphClkInit->PeriphClockSelection |= (RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | RCC_PERIPHCLK_TIM17); + /* Get the TIM15 clock configuration -----------------------------------------*/ + PeriphClkInit->Tim15ClockSelection = __HAL_RCC_GET_TIM15_SOURCE(); + /* Get the TIM16 clock configuration -----------------------------------------*/ + PeriphClkInit->Tim16ClockSelection = __HAL_RCC_GET_TIM16_SOURCE(); + /* Get the TIM17 clock configuration -----------------------------------------*/ + PeriphClkInit->Tim17ClockSelection = __HAL_RCC_GET_TIM17_SOURCE(); + +#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */ + +#if defined(STM32F303xC) || defined(STM32F358xx) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM8; + /* Get the TIM8 clock configuration -----------------------------------------*/ + PeriphClkInit->Tim8ClockSelection = __HAL_RCC_GET_TIM8_SOURCE(); + +#endif /* STM32F303xC || STM32F358xx */ + +#if defined(STM32F334x8) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_HRTIM1; + /* Get the HRTIM1 clock configuration -----------------------------------------*/ + PeriphClkInit->Hrtim1ClockSelection = __HAL_RCC_GET_HRTIM1_SOURCE(); + +#endif /* STM32F334x8 */ + +#if defined(STM32F373xC) || defined(STM32F378xx) + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SDADC; + /* Get the SDADC clock configuration -----------------------------------------*/ + PeriphClkInit->SdadcClockSelection = __HAL_RCC_GET_SDADC_SOURCE(); + + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC; + /* Get the CEC clock configuration -----------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); + +#endif /* STM32F373xC || STM32F378xx */ + +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/