mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/system_stm32f0xx.c
- Revision:
- 166:cb4253f91ada
- Parent:
- 106:ced8cbb51063
- Child:
- 167:d5744491c362
diff -r 46e3636d4af7 -r cb4253f91ada targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/system_stm32f0xx.c --- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/system_stm32f0xx.c Tue Apr 22 15:00:07 2014 +0100 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/system_stm32f0xx.c Tue Apr 22 16:00:06 2014 +0100 @@ -40,27 +40,17 @@ * value to your own configuration. * * 5. This file configures the system clock as follows: - *============================================================================= - *============================================================================= - * System Clock source | HSI *----------------------------------------------------------------------------- - * SYSCLK(Hz) | 8000000 - *----------------------------------------------------------------------------- - * HCLK(Hz) | 8000000 - *----------------------------------------------------------------------------- - * AHB Prescaler | 1 + * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI + * | (external 8 MHz clock) | (internal 8 MHz) + * | 2- PLL_HSE_XTAL | + * | (external 8 MHz xtal) | *----------------------------------------------------------------------------- - * APB Prescaler | 1 - *----------------------------------------------------------------------------- - * HSE Frequency(Hz) | NA - *---------------------------------------------------------------------------- - * PLLMUL | NA + * SYSCLK(MHz) | 48 | 48 *----------------------------------------------------------------------------- - * PREDIV | NA + * AHBCLK (MHz) | 48 | 48 *----------------------------------------------------------------------------- - * Flash Latency(WS) | 0 - *----------------------------------------------------------------------------- - * Prefetch Buffer | ON + * APBCLK (MHz) | 48 | 48 *----------------------------------------------------------------------------- ****************************************************************************** * @attention @@ -129,6 +119,10 @@ * @{ */ +/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */ +#define USE_PLL_HSE_EXTC (1) /* Use external clock */ +#define USE_PLL_HSE_XTAL (1) /* Use external xtal */ + /** * @} */ @@ -136,7 +130,8 @@ /** @addtogroup STM32F0xx_System_Private_Variables * @{ */ -uint32_t SystemCoreClock = 8000000; + +uint32_t SystemCoreClock = 48000000; __I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; /** @@ -147,7 +142,11 @@ * @{ */ -static void SetSysClock(void); +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +uint8_t SetSysClock_PLL_HSE(uint8_t bypass); +#endif + +uint8_t SetSysClock_PLL_HSI(void); /** * @} @@ -192,9 +191,6 @@ /* Disable all interrupts */ RCC->CIR = 0x00000000; - - /* Configure the System clock frequency, AHB/APBx prescalers and Flash settings */ - SetSysClock(); } /** @@ -277,30 +273,155 @@ } /** - * @brief Configures the System clock frequency, AHB/APBx prescalers and Flash - * settings. - * @note This function should be called only once the RCC clock configuration - * is reset to the default reset state (done in SystemInit() function). + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. * @param None * @retval None */ -static void SetSysClock(void) +void SetSysClock(void) { + /* 1- Try to start with HSE and external clock */ +#if USE_PLL_HSE_EXTC != 0 + if (SetSysClock_PLL_HSE(1) == 0) +#endif + { + /* 2- If fail try to start with HSE and external xtal */ + #if USE_PLL_HSE_XTAL != 0 + if (SetSysClock_PLL_HSE(0) == 0) + #endif + { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == 0) + { + while(1) + { + // [TODO] Put something here to tell the user that a problem occured... + } + } + } + } + + // Output clock on MCO pin (PA8) for debugging purpose + /* + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE); + GPIO_InitTypeDef GPIO_InitStructure; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; + GPIO_Init(GPIOA, &GPIO_InitStructure); + GPIO_PinAFConfig(GPIOA, GPIO_PinSource8, GPIO_AF_0); + // Output clock on MCO pin + // Warning: only RCC_MCOPrescaler_1 is available on STM32F030x8 devices + RCC_MCOConfig(RCC_MCOSource_SYSCLK, RCC_MCOPrescaler_1); + */ +} + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) /******************************************************************************/ -/* HSI used as System clock source */ +/* PLL (clocked by HSE) used as System clock source */ /******************************************************************************/ +uint8_t SetSysClock_PLL_HSE(uint8_t bypass) +{ + __IO uint32_t StartUpCounter = 0; + __IO uint32_t HSEStatus = 0; - /* At this stage the HSI is already enabled and used as System clock source */ + /* Bypass HSE: can be done only if HSE is OFF */ + RCC->CR &= ((uint32_t)~RCC_CR_HSEON); /* To be sure HSE is OFF */ + if (bypass != 0) + { + RCC->CR |= ((uint32_t)RCC_CR_HSEBYP); + } + else + { + RCC->CR &= ((uint32_t)~RCC_CR_HSEBYP); + } + + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - /* Enable Prefetch Buffer and Flash 0 wait state */ - FLASH->ACR = FLASH_ACR_PRFTBE; + /* Check if HSE has started correctly */ + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Enable Prefetch Buffer and set Flash Latency */ + FLASH->ACR = FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY; + + /* PLL configuration + PLLCLK = 48 MHz (xtal 8 MHz * 6) */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLMULL6 + | RCC_CFGR_HPRE_DIV1 /* HCLK = 48 MHz */ + | RCC_CFGR_PPRE_DIV1); /* PCLK = 48 MHz */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL) + { + } - /* HCLK = SYSCLK / 1 */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + return 1; // OK + } + else + { + return 0; // FAIL + } +} +#endif + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSI(void) +{ + /* Enable Prefetch Buffer and set Flash Latency */ + FLASH->ACR = FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY; - /* PCLK = HCLK / 1 */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE_DIV1; + /* PLL configuration + PLLCLK = 48 MHz ((HSI 8 MHz / 2) * 12) */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSI_Div2 | RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLMULL12 + | RCC_CFGR_HPRE_DIV1 /* HCLK = 48 MHz */ + | RCC_CFGR_PPRE_DIV1); /* PCLK = 48 MHz */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL) + { + } + + return 1; // OK } /**