mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h
- Revision:
- 205:c41fc65bcfb4
- Child:
- 218:44081b78fdc2
diff -r 92d082577917 -r c41fc65bcfb4 targets/cmsis/TARGET_STM/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h Thu May 22 20:00:09 2014 +0100 @@ -0,0 +1,519 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_uart_ex.h + * @author MCD Application Team + * @version V1.0.0 + * @date 20-May-2014 + * @brief Header file of UART HAL Extension module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_UART_EX_H +#define __STM32F0xx_HAL_UART_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UART Word Length + * @{ + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) +#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1) +#define UART_WORDLENGTH_8B ((uint32_t)0x00000000) +#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) +#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_7B) || \ + ((LENGTH) == UART_WORDLENGTH_8B) || \ + ((LENGTH) == UART_WORDLENGTH_9B)) +#else +#define UART_WORDLENGTH_8B ((uint32_t)0x00000000) +#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) +#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ + ((LENGTH) == UART_WORDLENGTH_9B)) +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) */ +/** + * @} + */ + +/** @defgroup UARTEx_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000) +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) +#else +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000) +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE)) +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) */ +/** + * @} + */ + + +#if !defined(STM32F030x6) && !defined(STM32F030x8) +/** @defgroup UARTEx_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE ((uint32_t)0x00000000) +#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) +#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \ + ((LIN) == UART_LIN_ENABLE)) +/** + * @} + */ + +/** @defgroup UARTEx_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) +#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) +#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) +/** + * @} + */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ + + + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define UART_FLAG_REACK ((uint32_t)0x00400000) +#define UART_FLAG_TEACK ((uint32_t)0x00200000) +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define UART_FLAG_WUF ((uint32_t)0x00100000) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +#define UART_FLAG_RWU ((uint32_t)0x00080000) +#define UART_FLAG_SBKF ((uint32_t)0x00040000 +#define UART_FLAG_CMF ((uint32_t)0x00020000) +#define UART_FLAG_BUSY ((uint32_t)0x00010000) +#define UART_FLAG_ABRF ((uint32_t)0x00008000) +#define UART_FLAG_ABRE ((uint32_t)0x00004000) +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define UART_FLAG_EOBF ((uint32_t)0x00001000) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +#define UART_FLAG_RTOF ((uint32_t)0x00000800) +#define UART_FLAG_CTS ((uint32_t)0x00000400) +#define UART_FLAG_CTSIF ((uint32_t)0x00000200) +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define UART_FLAG_LBDF ((uint32_t)0x00000100) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +#define UART_FLAG_TXE ((uint32_t)0x00000080) +#define UART_FLAG_TC ((uint32_t)0x00000040) +#define UART_FLAG_RXNE ((uint32_t)0x00000020) +#define UART_FLAG_IDLE ((uint32_t)0x00000010) +#define UART_FLAG_ORE ((uint32_t)0x00000008) +#define UART_FLAG_NE ((uint32_t)0x00000004) +#define UART_FLAG_FE ((uint32_t)0x00000002) +#define UART_FLAG_PE ((uint32_t)0x00000001) +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE ((uint16_t)0x0028) +#define UART_IT_TXE ((uint16_t)0x0727) +#define UART_IT_TC ((uint16_t)0x0626) +#define UART_IT_RXNE ((uint16_t)0x0525) +#define UART_IT_IDLE ((uint16_t)0x0424) +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define UART_IT_LBD ((uint16_t)0x0846) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +#define UART_IT_CTS ((uint16_t)0x096A) +#define UART_IT_CM ((uint16_t)0x142E) +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define UART_IT_WUF ((uint16_t)0x1476) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +/** + * @} + */ + + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */ +#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ +#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \ + ((PARAM) == UART_SENDBREAK_REQUEST) || \ + ((PARAM) == UART_MUTE_MODE_REQUEST) || \ + ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \ + ((PARAM) == UART_TXDATA_FLUSH_REQUEST)) +#else +#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \ + ((PARAM) == UART_SENDBREAK_REQUEST) || \ + ((PARAM) == UART_MUTE_MODE_REQUEST) || \ + ((PARAM) == UART_RXDATA_FLUSH_REQUEST)) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +/** + * @} + */ + +#if !defined(STM32F030x6) && !defined(STM32F030x8) +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000) +#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM) +#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE)) +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000) +#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1) +#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS) +#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \ + ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \ + ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY)) +/** + * @} + */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Macros + * @{ + */ + +/** @brief Reports the UART clock source. + * @param __HANDLE__: specifies the UART Handle + * @param __CLOCKSOURCE__ : output variable + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ + + +#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) +#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } while(0) +#elif defined (STM32F030x8) || \ + defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F051x8) || defined (STM32F058xx) +#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) +#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */ + + +/** @brief Computes the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__: specifies the UART Handle + * @retval none + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) +#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FF ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FF ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FF ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007F ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007F ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003F ; \ + } \ + } \ +} while(0) +#else +#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FF ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FF ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FF ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007F ; \ + } \ + } \ +} while(0) +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint16_t BreakDetectLength); +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); +/* I/O operation functions ***************************************************/ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart); +/* Peripheral Control functions **********************************************/ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +/* Peripheral State functions ************************************************/ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_UART_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/