mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/PinNames.h
- Revision:
- 52:a51c77007319
- Child:
- 56:99eb381a3269
diff -r 7838415c99e7 -r a51c77007319 targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/PinNames.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/PinNames.h Mon Dec 02 11:30:05 2013 +0000 @@ -0,0 +1,178 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// MODE (see GPIOMode_TypeDef structure) +// AFNUM (see AF_mapping constant table) +#define STM_PIN_DATA(MODE, AFNUM) (((MODE) << 8) | (AFNUM)) +#define STM_PIN_MODE(X) ((X) >> 8) +#define STM_PIN_AFNUM(X) ((X) & 0xFF) + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +typedef enum { + + // high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F) + // low nibble = pin number + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_11 = 0x1B, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_3 = 0x23, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_7 = 0x27, + PC_8 = 0x28, + PC_9 = 0x29, + PC_10 = 0x2A, + PC_11 = 0x2B, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_0 = 0x30, + PD_1 = 0x31, + PD_2 = 0x32, + PD_3 = 0x33, + PD_4 = 0x34, + PD_5 = 0x35, + PD_6 = 0x36, + PD_7 = 0x37, + PD_8 = 0x38, + PD_9 = 0x39, + PD_10 = 0x3A, + PD_11 = 0x3B, + PD_12 = 0x3C, + PD_13 = 0x3D, + PD_14 = 0x3E, + PD_15 = 0x3F, + + PE_0 = 0x40, + PE_1 = 0x41, + PE_2 = 0x42, + PE_3 = 0x43, + PE_4 = 0x44, + PE_5 = 0x45, + PE_6 = 0x46, + PE_7 = 0x47, + PE_8 = 0x48, + PE_9 = 0x49, + PE_10 = 0x4A, + PE_11 = 0x4B, + PE_12 = 0x4C, + PE_13 = 0x4D, + PE_14 = 0x4E, + PE_15 = 0x4F, + + //-------------------- + // NUCLEO_F103RB board + //-------------------- + + // Arduino connectors + A0 = PA_0, + A1 = PA_1, + A2 = PA_4, + A3 = PB_0, + A4 = PC_1, + A5 = PC_0, + D0 = PA_3, + D1 = PA_2, + D2 = PA_10, + D3 = PB_3, + D4 = PB_5, + D5 = PB_4, + D6 = PB_10, + D7 = PA_8, + D8 = PA_9, + D9 = PC_7, + D10 = PB_6, + D11 = PA_7, + D12 = PA_6, + D13 = PA_5, + D14 = PB_9, + D15 = PB_8, + + USER_BUTTON = PC_13, + UART_TX = PA_2, + UART_RX = PA_3, + + // mbed mandatory namings + LED1 = PA_5, + LED2 = PA_5, + LED3 = PA_5, + LED4 = PA_5, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullUp = 1, + PullDown = 2, + OpenDrain = 3 +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif