mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_NXP/TARGET_LPC11U6X/PinNames.h
- Revision:
- 174:8bb9f3a33240
- Child:
- 203:0f54f988aa69
diff -r 033f1c328f6e -r 8bb9f3a33240 targets/hal/TARGET_NXP/TARGET_LPC11U6X/PinNames.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11U6X/PinNames.h Tue Apr 29 11:15:07 2014 +0100 @@ -0,0 +1,181 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2014 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 16 +#define PIN_SHIFT 9 + +typedef enum { + // LPC11U68 Pin Names (PORT[19:16] + PIN[15:9] + IOCON offset[8:0]) + + P0_0 = (0 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x000, + P0_1 = (0 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x004, + P0_2 = (0 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x008, + P0_3 = (0 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x00C, + P0_4 = (0 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x010, + P0_5 = (0 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x014, + P0_6 = (0 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x018, + P0_7 = (0 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x01C, + P0_8 = (0 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x020, + P0_9 = (0 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x024, + P0_10= (0 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x028, + P0_11= (0 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x02C, + P0_12= (0 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x030, + P0_13= (0 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x034, + P0_14= (0 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x038, + P0_15= (0 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x03C, + P0_16= (0 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x040, + P0_17= (0 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x044, + P0_18= (0 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x048, + P0_19= (0 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x04C, + P0_20= (0 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x050, + P0_21= (0 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x054, + P0_22= (0 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x058, + P0_23= (0 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x05C, + + P1_0 = (1 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x060, + P1_1 = (1 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x064, + P1_2 = (1 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x068, + P1_3 = (1 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x06C, + P1_4 = (1 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x070, + P1_5 = (1 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x074, + P1_6 = (1 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x078, + P1_7 = (1 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x07C, + P1_8 = (1 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x080, + P1_9 = (1 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x084, + P1_10= (1 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x088, + P1_11= (1 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x08C, + P1_12= (1 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x090, + P1_13= (1 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x094, + P1_14= (1 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x098, + P1_15= (1 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x09C, + P1_16= (1 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x0A0, + P1_17= (1 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x0A4, + P1_18= (1 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x0A8, + P1_19= (1 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x0AC, + P1_20= (1 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x0B0, + P1_21= (1 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x0B4, + P1_22= (1 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x0B8, + P1_23= (1 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x0BC, + P1_24= (1 << PORT_SHIFT) | (24<< PIN_SHIFT) | 0x0C0, + P1_25= (1 << PORT_SHIFT) | (25<< PIN_SHIFT) | 0x0C4, + P1_26= (1 << PORT_SHIFT) | (26<< PIN_SHIFT) | 0x0C8, + P1_27= (1 << PORT_SHIFT) | (27<< PIN_SHIFT) | 0x0CC, + P1_28= (1 << PORT_SHIFT) | (28<< PIN_SHIFT) | 0x0D0, + P1_29= (1 << PORT_SHIFT) | (29<< PIN_SHIFT) | 0x0D4, + P1_30= (1 << PORT_SHIFT) | (30<< PIN_SHIFT) | 0x0D8, + P1_31= (1 << PORT_SHIFT) | (31<< PIN_SHIFT) | 0x0DC, + + P2_0 = (2 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x0F0, + P2_1 = (2 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x0F4, + P2_2 = (2 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x0FC, + P2_3 = (2 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x100, + P2_4 = (2 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x104, + P2_5 = (2 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x108, + P2_6 = (2 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x10C, + P2_7 = (2 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x110, + P2_8 = (2 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x114, + P2_9 = (2 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x118, + P2_10= (2 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x11C, + P2_11= (2 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x120, + P2_12= (2 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x124, + P2_13= (2 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x128, + P2_14= (2 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x12C, + P2_15= (2 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x130, + P2_16= (2 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x134, + P2_17= (2 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x138, + P2_18= (2 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x13C, + P2_19= (2 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x140, + P2_20= (2 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x144, + P2_21= (2 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x148, + P2_22= (2 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x14C, + P2_23= (2 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x150, + + LED_RED = P2_17, + LED_GREEN = P2_16, + LED_BLUE = P2_18, + + // mbed original LED naming + LED1 = LED_BLUE, + LED2 = LED_GREEN, + LED3 = LED_RED, + LED4 = LED_RED, + + // Serial to USB pins + USBTX = P0_19, + USBRX = P0_18, + + // Arduino Shield Receptacles Names + D0 = P0_18, + D1 = P0_19, + D2 = P1_18, + D3 = P1_24, + D4 = P1_19, + D5 = P1_26, + D6 = P1_27, + D7 = P1_25, + D8 = P1_28, + D9 = P2_3, + D10= P0_2, + D11= P0_9, + D12= P0_8, + D13= P1_29, + D14= P0_5, + D15= P0_4, + + A0 = P1_9, + A1 = P0_14, + A2 = P0_13, + A3 = P0_12, + A4 = P0_5, // same port as SDA + A5 = P0_4, // same port as SCL + SDA= P0_5, // same port as A4 + SCL= P0_4, // same port as A5 + + // Not connected + NC = (int)0xFFFFFFFF, +} PinName; + +typedef enum { + PullUp = 2, + PullDown = 1, + PullNone = 0, + Repeater = 3, + OpenDrain = 4, + PullDefault = PullDown +} PinMode; + +#define STDIO_UART_TX USBTX +#define STDIO_UART_RX USBRX +#define STDIO_UART UART_0 + +#ifdef __cplusplus +} +#endif + +#endif