mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/rtc_api.c
- Revision:
- 62:7731d679ae64
- Parent:
- 60:142c6c6f5949
- Child:
- 70:c1fbde68b492
diff -r cf80ee640ace -r 7731d679ae64 targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/rtc_api.c --- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/rtc_api.c Tue Dec 17 10:15:06 2013 +0000 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/rtc_api.c Tue Dec 17 11:00:05 2013 +0000 @@ -24,12 +24,18 @@ BKP_DeInit(); // Reset Backup Domain + // Uncomment these lines if you use the LSE // Enable LSE and wait till it's ready - RCC_LSEConfig(RCC_LSE_ON); - while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) {} + //RCC_LSEConfig(RCC_LSE_ON); + //while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) {} + //RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE); // Select LSE as RTC Clock Source - RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE); // Select LSE as RTC Clock Source - + // Uncomment these lines if you use the LSI + // Enable LSI and wait till it's ready + RCC_LSICmd(ENABLE); + while (RCC_GetFlagStatus(RCC_FLAG_LSIRDY) == RESET) {} + RCC_RTCCLKConfig(RCC_RTCCLKSource_LSI); // Select LSI as RTC Clock Source + RCC_RTCCLKCmd(ENABLE); // Enable RTC Clock RTC_WaitForSynchro(); // Wait for RTC registers synchronization @@ -37,8 +43,9 @@ RTC_WaitForLastTask(); // Wait until last write operation on RTC registers has finished // Set RTC period to 1 sec - // RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767+1) - RTC_SetPrescaler(32767); + // For LSE: prescaler = RTCCLK/RTC period = 32768Hz/1Hz = 32768 + // For LSI: prescaler = RTCCLK/RTC period = 40000Hz/1Hz = 40000 + RTC_SetPrescaler(39999); RTC_WaitForLastTask(); // Wait until last write operation on RTC registers has finished