Diff: targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/rtc_api.c

Revision:

216:577900467c9e

Parent:

166:cb4253f91ada

diff -r 83cf97a28428 -r 577900467c9e targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/rtc_api.c
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/rtc_api.c	Tue May 27 08:30:06 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/rtc_api.c	Tue May 27 10:00:08 2014 +0100
@@ -49,7 +49,7 @@
     // Reset back up registers
     RCC_BackupResetCmd(ENABLE);
     RCC_BackupResetCmd(DISABLE);
-  
+
     // Enable LSE clock
     RCC_LSEConfig(RCC_LSE_ON);
 
@@ -58,40 +58,48 @@
         LSEStatus = RCC_GetFlagStatus(RCC_FLAG_LSERDY);
         wait_ms(1);
         StartUpCounter++;
-    } while((LSEStatus == 0) && (StartUpCounter <= LSE_STARTUP_TIMEOUT));
+    } while ((LSEStatus == 0) && (StartUpCounter <= LSE_STARTUP_TIMEOUT));
 
     if (StartUpCounter > LSE_STARTUP_TIMEOUT) {
         // The LSE has not started, use LSI instead.
-        // The RTC Clock may vary due to LSI frequency dispersion.  
-        RCC_LSEConfig(RCC_LSE_OFF);   
+        // The RTC Clock may vary due to LSI frequency dispersion.
+        RCC_LSEConfig(RCC_LSE_OFF);
         RCC_LSICmd(ENABLE); // Enable LSI
         while (RCC_GetFlagStatus(RCC_FLAG_LSIRDY) == RESET) {} // Wait until ready
         RCC_RTCCLKConfig(RCC_RTCCLKSource_LSI); // Select the RTC Clock Source
-        rtc_freq = 40000; // [TODO] To be measured precisely using a timer input capture  
-    }  
-    else {
+        rtc_freq = 40000; // [TODO] To be measured precisely using a timer input capture
+    } else {
         // The LSE has correctly started
         RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE); // Select the RTC Clock Source
         rtc_freq = LSE_VALUE;
     }
-  
-    RCC_RTCCLKCmd(ENABLE); // Enable RTC Clock 
-      
+
+    RCC_RTCCLKCmd(ENABLE); // Enable RTC Clock
+
     RTC_WaitForSynchro(); // Wait for RTC registers synchronization
 
     RTC_InitTypeDef RTC_InitStructure;
     RTC_InitStructure.RTC_AsynchPrediv = 127;
-    RTC_InitStructure.RTC_SynchPrediv	 = (rtc_freq / 128) - 1;
+    RTC_InitStructure.RTC_SynchPrediv    = (rtc_freq / 128) - 1;
     RTC_InitStructure.RTC_HourFormat   = RTC_HourFormat_24;
     RTC_Init(&RTC_InitStructure);
-    
+
     PWR_BackupAccessCmd(DISABLE); // Disable access to Backup domain
-      
+
     rtc_inited = 1;
 }
 
 void rtc_free(void) {
-    RCC_DeInit(); // Resets the RCC clock configuration to the default reset state
+    // Reset RTC
+    PWR_BackupAccessCmd(ENABLE); // Enable access to Backup Domain
+    RTC_DeInit();
+    RCC_BackupResetCmd(ENABLE);
+    RCC_BackupResetCmd(DISABLE);
+    // Disable RTC, LSE and LSI clocks
+    RCC_RTCCLKCmd(DISABLE);
+    RCC_LSEConfig(RCC_LSE_OFF);
+    RCC_LSICmd(DISABLE);
+
     rtc_inited = 0;
 }
 
@@ -120,11 +128,11 @@
     RTC_DateTypeDef dateStruct;
     RTC_TimeTypeDef timeStruct;
     struct tm timeinfo;
-        
+
     // Read actual date and time
     RTC_GetTime(RTC_Format_BIN, &timeStruct);
     RTC_GetDate(RTC_Format_BIN, &dateStruct);
-    
+
     // Setup a tm structure based on the RTC
     timeinfo.tm_wday = dateStruct.RTC_WeekDay;
     timeinfo.tm_mon  = dateStruct.RTC_Month - 1;
@@ -133,11 +141,11 @@
     timeinfo.tm_hour = timeStruct.RTC_Hours;
     timeinfo.tm_min  = timeStruct.RTC_Minutes;
     timeinfo.tm_sec  = timeStruct.RTC_Seconds;
-    
+
     // Convert to timestamp
     time_t t = mktime(&timeinfo);
-    
-    return t;    
+
+    return t;
 }
 
 void rtc_write(time_t t) {
@@ -146,7 +154,7 @@
 
     // Convert the time into a tm
     struct tm *timeinfo = localtime(&t);
-    
+
     // Fill RTC structures
     dateStruct.RTC_WeekDay = timeinfo->tm_wday;
     dateStruct.RTC_Month   = timeinfo->tm_mon + 1;
@@ -156,11 +164,11 @@
     timeStruct.RTC_Minutes = timeinfo->tm_min;
     timeStruct.RTC_Seconds = timeinfo->tm_sec;
     timeStruct.RTC_H12     = RTC_HourFormat_24;
-    
+
     // Change the RTC current date/time
-    PWR_BackupAccessCmd(ENABLE); // Enable access to RTC    
+    PWR_BackupAccessCmd(ENABLE); // Enable access to RTC
     RTC_SetDate(RTC_Format_BIN, &dateStruct);
-    RTC_SetTime(RTC_Format_BIN, &timeStruct);    
+    RTC_SetTime(RTC_Format_BIN, &timeStruct);
     PWR_BackupAccessCmd(DISABLE); // Disable access to RTC
 }