Diff: targets/hal/TARGET_NXP/TARGET_LPC408X/PeripheralNames.h

Revision:

15:4892fe388435

Child:

50:b08ceb75017d

diff -r 096882eb0961 -r 4892fe388435 targets/hal/TARGET_NXP/TARGET_LPC408X/PeripheralNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC408X/PeripheralNames.h	Wed Aug 07 16:43:59 2013 +0300
@@ -0,0 +1,88 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    UART_0 = (int)LPC_UART0_BASE,
+    UART_1 = (int)LPC_UART1_BASE,
+    UART_2 = (int)LPC_UART2_BASE,
+    UART_3 = (int)LPC_UART3_BASE,
+    UART_4 = (int)LPC_UART4_BASE
+} UARTName;
+
+typedef enum {
+    ADC0_0 = 0,
+    ADC0_1,
+    ADC0_2,
+    ADC0_3,
+    ADC0_4,
+    ADC0_5,
+    ADC0_6,
+    ADC0_7
+} ADCName;
+
+typedef enum {
+    DAC_0 = 0
+} DACName;
+
+typedef enum {
+    SPI_0 = (int)LPC_SSP0_BASE,
+    SPI_1 = (int)LPC_SSP1_BASE,
+    SPI_2 = (int)LPC_SSP2_BASE
+} SPIName;
+
+typedef enum {
+    I2C_0 = (int)LPC_I2C0_BASE,
+    I2C_1 = (int)LPC_I2C1_BASE,
+    I2C_2 = (int)LPC_I2C2_BASE
+} I2CName;
+
+typedef enum {
+    PWM0_1 = 1,
+    PWM0_2,
+    PWM0_3,
+    PWM0_4,
+    PWM0_5,
+    PWM0_6,
+    PWM1_1,
+    PWM1_2,
+    PWM1_3,
+    PWM1_4,
+    PWM1_5,
+    PWM1_6
+} PWMName;
+
+typedef enum {
+     CAN_1 = (int)LPC_CAN1_BASE,
+     CAN_2 = (int)LPC_CAN2_BASE
+} CANName;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        UART_0
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif