mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: vendor/NXP/LPC812/hal/spi_api.c
- Revision:
- 10:3bc89ef62ce7
diff -r 0ce32e54c9a7 -r 3bc89ef62ce7 vendor/NXP/LPC812/hal/spi_api.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/vendor/NXP/LPC812/hal/spi_api.c Fri Jun 14 17:49:17 2013 +0100 @@ -0,0 +1,210 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include <math.h> + +#include "spi_api.h" +#include "cmsis.h" +#include "pinmap.h" +#include "error.h" + +static const SWM_Map SWM_SPI_SSEL[] = { + {4, 16}, + {5, 16}, +}; + +static const SWM_Map SWM_SPI_SCLK[] = { + {3, 24}, + {4, 24}, +}; + +static const SWM_Map SWM_SPI_MOSI[] = { + {4, 0}, + {5, 0}, +}; + +static const SWM_Map SWM_SPI_MISO[] = { + {4, 8}, + {5, 16}, +}; + +// bit flags for used SPIs +static unsigned char spi_used = 0; +static int get_available_spi(void) { + int i; + for (i=0; i<2; i++) { + if ((spi_used & (1 << i)) == 0) + return i; + } + return -1; +} + +static inline int ssp_disable(spi_t *obj); +static inline int ssp_enable(spi_t *obj); + +void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) { + int spi_n = get_available_spi(); + if (spi_n == -1) { + error("No available SPI"); + } + obj->spi_n = spi_n; + spi_used |= (1 << spi_n); + + obj->spi = (spi_n) ? (LPC_SPI_TypeDef *)(LPC_SPI1_BASE) : (LPC_SPI_TypeDef *)(LPC_SPI0_BASE); + + const SWM_Map *swm; + uint32_t regVal; + + swm = &SWM_SPI_SCLK[obj->spi_n]; + regVal = LPC_SWM->PINASSIGN[swm->n] & ~(0xFF << swm->offset); + LPC_SWM->PINASSIGN[swm->n] = regVal | (sclk << swm->offset); + + swm = &SWM_SPI_MOSI[obj->spi_n]; + regVal = LPC_SWM->PINASSIGN[swm->n] & ~(0xFF << swm->offset); + LPC_SWM->PINASSIGN[swm->n] = regVal | (mosi << swm->offset); + + swm = &SWM_SPI_MISO[obj->spi_n]; + regVal = LPC_SWM->PINASSIGN[swm->n] & ~(0xFF << swm->offset); + LPC_SWM->PINASSIGN[swm->n] = regVal | (miso << swm->offset); + + swm = &SWM_SPI_SSEL[obj->spi_n]; + regVal = LPC_SWM->PINASSIGN[swm->n] & ~(0xFF << swm->offset); + LPC_SWM->PINASSIGN[swm->n] = regVal | (ssel << swm->offset); + + // clear interrupts + obj->spi->INTENCLR = 0x3f; + + // enable power and clocking + switch (obj->spi_n) { + case 0: + LPC_SYSCON->SYSAHBCLKCTRL |= (1<<11); + LPC_SYSCON->PRESETCTRL &= ~(0x1<<0); + LPC_SYSCON->PRESETCTRL |= (0x1<<0); + break; + case 1: + LPC_SYSCON->SYSAHBCLKCTRL |= (1<<12); + LPC_SYSCON->PRESETCTRL &= ~(0x1<<1); + LPC_SYSCON->PRESETCTRL |= (0x1<<1); + break; + } + + // set default format and frequency + if (ssel == NC) { + spi_format(obj, 8, 0, 0); // 8 bits, mode 0, master + } else { + spi_format(obj, 8, 0, 1); // 8 bits, mode 0, slave + } + spi_frequency(obj, 1000000); + + // enable the ssp channel + ssp_enable(obj); +} + +void spi_free(spi_t *obj) {} + +void spi_format(spi_t *obj, int bits, int mode, int slave) { + ssp_disable(obj); + + if (!(bits >= 1 && bits <= 16) || !(mode >= 0 && mode <= 3)) { + error("SPI format error"); + } + + + int polarity = (mode & 0x2) ? 1 : 0; + int phase = (mode & 0x1) ? 1 : 0; + + // set it up + int DSS = bits - 1; // DSS (data select size) + int SPO = (polarity) ? 1 : 0; // SPO - clock out polarity + int SPH = (phase) ? 1 : 0; // SPH - clock out phase + + uint32_t tmp = obj->spi->CFG; + tmp &= ~((1 << 2) | (1 << 4) | (1 << 5)); + tmp |= (SPH << 4) | (SPO << 5) | ((slave ? 0 : 1) << 2); + obj->spi->CFG = tmp; + + // select frame length + tmp = obj->spi->TXDATCTL; + tmp &= ~(0xf << 24); + tmp |= (DSS << 24); + obj->spi->TXDATCTL = tmp; + + ssp_enable(obj); +} + +void spi_frequency(spi_t *obj, int hz) { + ssp_disable(obj); + + uint32_t PCLK = SystemCoreClock; + + obj->spi->DIV = PCLK/hz - 1; + obj->spi->DLY = 0; + ssp_enable(obj); +} + +static inline int ssp_disable(spi_t *obj) { + return obj->spi->CFG &= ~(1 << 0); +} + +static inline int ssp_enable(spi_t *obj) { + return obj->spi->CFG |= (1 << 0); +} + +static inline int ssp_readable(spi_t *obj) { + return obj->spi->STAT & (1 << 0); +} + +static inline int ssp_writeable(spi_t *obj) { + return obj->spi->STAT & (1 << 1); +} + +static inline void ssp_write(spi_t *obj, int value) { + while (!ssp_writeable(obj)); + // end of transfer + obj->spi->TXDATCTL |= (1 << 20); + obj->spi->TXDAT = value; +} + +static inline int ssp_read(spi_t *obj) { + while (!ssp_readable(obj)); + return obj->spi->RXDAT; +} + +static inline int ssp_busy(spi_t *obj) { + // TODO + return 0; +} + +int spi_master_write(spi_t *obj, int value) { + ssp_write(obj, value); + return ssp_read(obj); +} + +int spi_slave_receive(spi_t *obj) { + return (ssp_readable(obj) && !ssp_busy(obj)) ? (1) : (0); +}; + +int spi_slave_read(spi_t *obj) { + return obj->spi->RXDAT; +} + +void spi_slave_write(spi_t *obj, int value) { + while (ssp_writeable(obj) == 0) ; + obj->spi->TXDAT = value; +} + +int spi_busy(spi_t *obj) { + return ssp_busy(obj); +}