mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_mpu.h
- Revision:
- 149:1fb5f62b92bd
- Parent:
- 146:f64d43ff0c18
diff -r 213f3ebbe634 -r 1fb5f62b92bd targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_mpu.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_mpu.h Thu Apr 03 11:45:06 2014 +0100 @@ -0,0 +1,1923 @@ +/* + * Copyright (c) 2014, Freescale Semiconductor, Inc. + * All rights reserved. + * + * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_MPU_REGISTERS_H__ +#define __HW_MPU_REGISTERS_H__ + +#include "regs.h" + +/* + * MK64F12 MPU + * + * Memory protection unit + * + * Registers defined in this header file: + * - HW_MPU_CESR - Control/Error Status Register + * - HW_MPU_EARn - Error Address Register, slave port n + * - HW_MPU_EDRn - Error Detail Register, slave port n + * - HW_MPU_RGDn_WORD0 - Region Descriptor n, Word 0 + * - HW_MPU_RGDn_WORD1 - Region Descriptor n, Word 1 + * - HW_MPU_RGDn_WORD2 - Region Descriptor n, Word 2 + * - HW_MPU_RGDn_WORD3 - Region Descriptor n, Word 3 + * - HW_MPU_RGDAACn - Region Descriptor Alternate Access Control n + * + * - hw_mpu_t - Struct containing all module registers. + */ + +//! @name Module base addresses +//@{ +#ifndef REGS_MPU_BASE +#define HW_MPU_INSTANCE_COUNT (1U) //!< Number of instances of the MPU module. +#define REGS_MPU_BASE (0x4000D000U) //!< Base address for MPU. +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_MPU_CESR - Control/Error Status Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_MPU_CESR - Control/Error Status Register (RW) + * + * Reset value: 0x00815101U + */ +typedef union _hw_mpu_cesr +{ + uint32_t U; + struct _hw_mpu_cesr_bitfields + { + uint32_t VLD : 1; //!< [0] Valid + uint32_t RESERVED0 : 7; //!< [7:1] + uint32_t NRGD : 4; //!< [11:8] Number Of Region Descriptors + uint32_t NSP : 4; //!< [15:12] Number Of Slave Ports + uint32_t HRL : 4; //!< [19:16] Hardware Revision Level + uint32_t RESERVED1 : 7; //!< [26:20] + uint32_t SPERR : 5; //!< [31:27] Slave Port n Error + } B; +} hw_mpu_cesr_t; +#endif + +/*! + * @name Constants and macros for entire MPU_CESR register + */ +//@{ +#define HW_MPU_CESR_ADDR (REGS_MPU_BASE + 0x0U) + +#ifndef __LANGUAGE_ASM__ +#define HW_MPU_CESR (*(__IO hw_mpu_cesr_t *) HW_MPU_CESR_ADDR) +#define HW_MPU_CESR_RD() (HW_MPU_CESR.U) +#define HW_MPU_CESR_WR(v) (HW_MPU_CESR.U = (v)) +#define HW_MPU_CESR_SET(v) (HW_MPU_CESR_WR(HW_MPU_CESR_RD() | (v))) +#define HW_MPU_CESR_CLR(v) (HW_MPU_CESR_WR(HW_MPU_CESR_RD() & ~(v))) +#define HW_MPU_CESR_TOG(v) (HW_MPU_CESR_WR(HW_MPU_CESR_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual MPU_CESR bitfields + */ + +/*! + * @name Register MPU_CESR, field VLD[0] (RW) + * + * Global enable/disable for the MPU. + * + * Values: + * - 0 - MPU is disabled. All accesses from all bus masters are allowed. + * - 1 - MPU is enabled + */ +//@{ +#define BP_MPU_CESR_VLD (0U) //!< Bit position for MPU_CESR_VLD. +#define BM_MPU_CESR_VLD (0x00000001U) //!< Bit mask for MPU_CESR_VLD. +#define BS_MPU_CESR_VLD (1U) //!< Bit field size in bits for MPU_CESR_VLD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_CESR_VLD field. +#define BR_MPU_CESR_VLD (BITBAND_ACCESS32(HW_MPU_CESR_ADDR, BP_MPU_CESR_VLD)) +#endif + +//! @brief Format value for bitfield MPU_CESR_VLD. +#define BF_MPU_CESR_VLD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_CESR_VLD), uint32_t) & BM_MPU_CESR_VLD) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the VLD field to a new value. +#define BW_MPU_CESR_VLD(v) (BITBAND_ACCESS32(HW_MPU_CESR_ADDR, BP_MPU_CESR_VLD) = (v)) +#endif +//@} + +/*! + * @name Register MPU_CESR, field NRGD[11:8] (RO) + * + * Indicates the number of region descriptors implemented in the MPU. + * + * Values: + * - 0000 - 8 region descriptors + * - 0001 - 12 region descriptors + * - 0010 - 16 region descriptors + */ +//@{ +#define BP_MPU_CESR_NRGD (8U) //!< Bit position for MPU_CESR_NRGD. +#define BM_MPU_CESR_NRGD (0x00000F00U) //!< Bit mask for MPU_CESR_NRGD. +#define BS_MPU_CESR_NRGD (4U) //!< Bit field size in bits for MPU_CESR_NRGD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_CESR_NRGD field. +#define BR_MPU_CESR_NRGD (HW_MPU_CESR.B.NRGD) +#endif +//@} + +/*! + * @name Register MPU_CESR, field NSP[15:12] (RO) + * + * Specifies the number of slave ports connected to the MPU. + */ +//@{ +#define BP_MPU_CESR_NSP (12U) //!< Bit position for MPU_CESR_NSP. +#define BM_MPU_CESR_NSP (0x0000F000U) //!< Bit mask for MPU_CESR_NSP. +#define BS_MPU_CESR_NSP (4U) //!< Bit field size in bits for MPU_CESR_NSP. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_CESR_NSP field. +#define BR_MPU_CESR_NSP (HW_MPU_CESR.B.NSP) +#endif +//@} + +/*! + * @name Register MPU_CESR, field HRL[19:16] (RO) + * + * Specifies the MPU's hardware and definition revision level. It can be read by + * software to determine the functional definition of the module. + */ +//@{ +#define BP_MPU_CESR_HRL (16U) //!< Bit position for MPU_CESR_HRL. +#define BM_MPU_CESR_HRL (0x000F0000U) //!< Bit mask for MPU_CESR_HRL. +#define BS_MPU_CESR_HRL (4U) //!< Bit field size in bits for MPU_CESR_HRL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_CESR_HRL field. +#define BR_MPU_CESR_HRL (HW_MPU_CESR.B.HRL) +#endif +//@} + +/*! + * @name Register MPU_CESR, field SPERR[31:27] (W1C) + * + * Indicates a captured error in EARn and EDRn. This bit is set when the + * hardware detects an error and records the faulting address and attributes. It is + * cleared by writing one to it. If another error is captured at the exact same cycle + * as the write, the flag remains set. A find-first-one instruction or + * equivalent can detect the presence of a captured error. The following shows the + * correspondence between the bit number and slave port number: Bit 31 corresponds to + * slave port 0. Bit 30 corresponds to slave port 1. Bit 29 corresponds to slave + * port 2. Bit 28 corresponds to slave port 3. Bit 27 corresponds to slave port 4. + * + * Values: + * - 0 - No error has occurred for slave port n. + * - 1 - An error has occurred for slave port n. + */ +//@{ +#define BP_MPU_CESR_SPERR (27U) //!< Bit position for MPU_CESR_SPERR. +#define BM_MPU_CESR_SPERR (0xF8000000U) //!< Bit mask for MPU_CESR_SPERR. +#define BS_MPU_CESR_SPERR (5U) //!< Bit field size in bits for MPU_CESR_SPERR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_CESR_SPERR field. +#define BR_MPU_CESR_SPERR (HW_MPU_CESR.B.SPERR) +#endif + +//! @brief Format value for bitfield MPU_CESR_SPERR. +#define BF_MPU_CESR_SPERR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_CESR_SPERR), uint32_t) & BM_MPU_CESR_SPERR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SPERR field to a new value. +#define BW_MPU_CESR_SPERR(v) (HW_MPU_CESR_WR((HW_MPU_CESR_RD() & ~BM_MPU_CESR_SPERR) | BF_MPU_CESR_SPERR(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_MPU_EARn - Error Address Register, slave port n +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_MPU_EARn - Error Address Register, slave port n (RO) + * + * Reset value: 0x00000000U + * + * When the MPU detects an access error on slave port n, the 32-bit reference + * address is captured in this read-only register and the corresponding bit in + * CESR[SPERR] set. Additional information about the faulting access is captured in + * the corresponding EDRn at the same time. This register and the corresponding + * EDRn contain the most recent access error; there are no hardware interlocks with + * CESR[SPERR], as the error registers are always loaded upon the occurrence of + * each protection violation. + */ +typedef union _hw_mpu_earn +{ + uint32_t U; + struct _hw_mpu_earn_bitfields + { + uint32_t EADDR : 32; //!< [31:0] Error Address + } B; +} hw_mpu_earn_t; +#endif + +/*! + * @name Constants and macros for entire MPU_EARn register + */ +//@{ +#define HW_MPU_EARn_COUNT (5U) + +#define HW_MPU_EARn_ADDR(n) (REGS_MPU_BASE + 0x10U + (0x8U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_MPU_EARn(n) (*(__I hw_mpu_earn_t *) HW_MPU_EARn_ADDR(n)) +#define HW_MPU_EARn_RD(n) (HW_MPU_EARn(n).U) +#endif +//@} + +/* + * Constants & macros for individual MPU_EARn bitfields + */ + +/*! + * @name Register MPU_EARn, field EADDR[31:0] (RO) + * + * Indicates the reference address from slave port n that generated the access + * error + */ +//@{ +#define BP_MPU_EARn_EADDR (0U) //!< Bit position for MPU_EARn_EADDR. +#define BM_MPU_EARn_EADDR (0xFFFFFFFFU) //!< Bit mask for MPU_EARn_EADDR. +#define BS_MPU_EARn_EADDR (32U) //!< Bit field size in bits for MPU_EARn_EADDR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_EARn_EADDR field. +#define BR_MPU_EARn_EADDR(n) (HW_MPU_EARn(n).U) +#endif +//@} +//------------------------------------------------------------------------------------------- +// HW_MPU_EDRn - Error Detail Register, slave port n +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_MPU_EDRn - Error Detail Register, slave port n (RO) + * + * Reset value: 0x00000000U + * + * When the MPU detects an access error on slave port n, 32 bits of error detail + * are captured in this read-only register and the corresponding bit in + * CESR[SPERR] is set. Information on the faulting address is captured in the + * corresponding EARn register at the same time. This register and the corresponding EARn + * register contain the most recent access error; there are no hardware interlocks + * with CESR[SPERR] as the error registers are always loaded upon the occurrence + * of each protection violation. + */ +typedef union _hw_mpu_edrn +{ + uint32_t U; + struct _hw_mpu_edrn_bitfields + { + uint32_t ERW : 1; //!< [0] Error Read/Write + uint32_t EATTR : 3; //!< [3:1] Error Attributes + uint32_t EMN : 4; //!< [7:4] Error Master Number + uint32_t EPID : 8; //!< [15:8] Error Process Identification + uint32_t EACD : 16; //!< [31:16] Error Access Control Detail + } B; +} hw_mpu_edrn_t; +#endif + +/*! + * @name Constants and macros for entire MPU_EDRn register + */ +//@{ +#define HW_MPU_EDRn_COUNT (5U) + +#define HW_MPU_EDRn_ADDR(n) (REGS_MPU_BASE + 0x14U + (0x8U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_MPU_EDRn(n) (*(__I hw_mpu_edrn_t *) HW_MPU_EDRn_ADDR(n)) +#define HW_MPU_EDRn_RD(n) (HW_MPU_EDRn(n).U) +#endif +//@} + +/* + * Constants & macros for individual MPU_EDRn bitfields + */ + +/*! + * @name Register MPU_EDRn, field ERW[0] (RO) + * + * Indicates the access type of the faulting reference. + * + * Values: + * - 0 - Read + * - 1 - Write + */ +//@{ +#define BP_MPU_EDRn_ERW (0U) //!< Bit position for MPU_EDRn_ERW. +#define BM_MPU_EDRn_ERW (0x00000001U) //!< Bit mask for MPU_EDRn_ERW. +#define BS_MPU_EDRn_ERW (1U) //!< Bit field size in bits for MPU_EDRn_ERW. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_EDRn_ERW field. +#define BR_MPU_EDRn_ERW(n) (BITBAND_ACCESS32(HW_MPU_EDRn_ADDR(n), BP_MPU_EDRn_ERW)) +#endif +//@} + +/*! + * @name Register MPU_EDRn, field EATTR[3:1] (RO) + * + * Indicates attribute information about the faulting reference. All other + * encodings are reserved. + * + * Values: + * - 000 - User mode, instruction access + * - 001 - User mode, data access + * - 010 - Supervisor mode, instruction access + * - 011 - Supervisor mode, data access + */ +//@{ +#define BP_MPU_EDRn_EATTR (1U) //!< Bit position for MPU_EDRn_EATTR. +#define BM_MPU_EDRn_EATTR (0x0000000EU) //!< Bit mask for MPU_EDRn_EATTR. +#define BS_MPU_EDRn_EATTR (3U) //!< Bit field size in bits for MPU_EDRn_EATTR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_EDRn_EATTR field. +#define BR_MPU_EDRn_EATTR(n) (HW_MPU_EDRn(n).B.EATTR) +#endif +//@} + +/*! + * @name Register MPU_EDRn, field EMN[7:4] (RO) + * + * Indicates the bus master that generated the access error. + */ +//@{ +#define BP_MPU_EDRn_EMN (4U) //!< Bit position for MPU_EDRn_EMN. +#define BM_MPU_EDRn_EMN (0x000000F0U) //!< Bit mask for MPU_EDRn_EMN. +#define BS_MPU_EDRn_EMN (4U) //!< Bit field size in bits for MPU_EDRn_EMN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_EDRn_EMN field. +#define BR_MPU_EDRn_EMN(n) (HW_MPU_EDRn(n).B.EMN) +#endif +//@} + +/*! + * @name Register MPU_EDRn, field EPID[15:8] (RO) + * + * Records the process identifier of the faulting reference. The process + * identifier is typically driven only by processor cores; for other bus masters, this + * field is cleared. + */ +//@{ +#define BP_MPU_EDRn_EPID (8U) //!< Bit position for MPU_EDRn_EPID. +#define BM_MPU_EDRn_EPID (0x0000FF00U) //!< Bit mask for MPU_EDRn_EPID. +#define BS_MPU_EDRn_EPID (8U) //!< Bit field size in bits for MPU_EDRn_EPID. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_EDRn_EPID field. +#define BR_MPU_EDRn_EPID(n) (HW_MPU_EDRn(n).B.EPID) +#endif +//@} + +/*! + * @name Register MPU_EDRn, field EACD[31:16] (RO) + * + * Indicates the region descriptor with the access error. If EDRn contains a + * captured error and EACD is cleared, an access did not hit in any region + * descriptor. If only a single EACD bit is set, the protection error was caused by a + * single non-overlapping region descriptor. If two or more EACD bits are set, the + * protection error was caused by an overlapping set of region descriptors. + */ +//@{ +#define BP_MPU_EDRn_EACD (16U) //!< Bit position for MPU_EDRn_EACD. +#define BM_MPU_EDRn_EACD (0xFFFF0000U) //!< Bit mask for MPU_EDRn_EACD. +#define BS_MPU_EDRn_EACD (16U) //!< Bit field size in bits for MPU_EDRn_EACD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_EDRn_EACD field. +#define BR_MPU_EDRn_EACD(n) (HW_MPU_EDRn(n).B.EACD) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_MPU_RGDn_WORD0 - Region Descriptor n, Word 0 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_MPU_RGDn_WORD0 - Region Descriptor n, Word 0 (RW) + * + * Reset value: 0x00000000U + * + * The first word of the region descriptor defines the 0-modulo-32 byte start + * address of the memory region. Writes to this register clear the region + * descriptor's valid bit (RGDn_WORD3[VLD]). + */ +typedef union _hw_mpu_rgdn_word0 +{ + uint32_t U; + struct _hw_mpu_rgdn_word0_bitfields + { + uint32_t RESERVED0 : 5; //!< [4:0] + uint32_t SRTADDR : 27; //!< [31:5] Start Address + } B; +} hw_mpu_rgdn_word0_t; +#endif + +/*! + * @name Constants and macros for entire MPU_RGDn_WORD0 register + */ +//@{ +#define HW_MPU_RGDn_WORD0_COUNT (12U) + +#define HW_MPU_RGDn_WORD0_ADDR(n) (REGS_MPU_BASE + 0x400U + (0x10U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_MPU_RGDn_WORD0(n) (*(__IO hw_mpu_rgdn_word0_t *) HW_MPU_RGDn_WORD0_ADDR(n)) +#define HW_MPU_RGDn_WORD0_RD(n) (HW_MPU_RGDn_WORD0(n).U) +#define HW_MPU_RGDn_WORD0_WR(n, v) (HW_MPU_RGDn_WORD0(n).U = (v)) +#define HW_MPU_RGDn_WORD0_SET(n, v) (HW_MPU_RGDn_WORD0_WR(n, HW_MPU_RGDn_WORD0_RD(n) | (v))) +#define HW_MPU_RGDn_WORD0_CLR(n, v) (HW_MPU_RGDn_WORD0_WR(n, HW_MPU_RGDn_WORD0_RD(n) & ~(v))) +#define HW_MPU_RGDn_WORD0_TOG(n, v) (HW_MPU_RGDn_WORD0_WR(n, HW_MPU_RGDn_WORD0_RD(n) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual MPU_RGDn_WORD0 bitfields + */ + +/*! + * @name Register MPU_RGDn_WORD0, field SRTADDR[31:5] (RW) + * + * Defines the most significant bits of the 0-modulo-32 byte start address of + * the memory region. + */ +//@{ +#define BP_MPU_RGDn_WORD0_SRTADDR (5U) //!< Bit position for MPU_RGDn_WORD0_SRTADDR. +#define BM_MPU_RGDn_WORD0_SRTADDR (0xFFFFFFE0U) //!< Bit mask for MPU_RGDn_WORD0_SRTADDR. +#define BS_MPU_RGDn_WORD0_SRTADDR (27U) //!< Bit field size in bits for MPU_RGDn_WORD0_SRTADDR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD0_SRTADDR field. +#define BR_MPU_RGDn_WORD0_SRTADDR(n) (HW_MPU_RGDn_WORD0(n).B.SRTADDR) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD0_SRTADDR. +#define BF_MPU_RGDn_WORD0_SRTADDR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD0_SRTADDR), uint32_t) & BM_MPU_RGDn_WORD0_SRTADDR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SRTADDR field to a new value. +#define BW_MPU_RGDn_WORD0_SRTADDR(n, v) (HW_MPU_RGDn_WORD0_WR(n, (HW_MPU_RGDn_WORD0_RD(n) & ~BM_MPU_RGDn_WORD0_SRTADDR) | BF_MPU_RGDn_WORD0_SRTADDR(v))) +#endif +//@} +//------------------------------------------------------------------------------------------- +// HW_MPU_RGDn_WORD1 - Region Descriptor n, Word 1 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_MPU_RGDn_WORD1 - Region Descriptor n, Word 1 (RW) + * + * Reset value: 0xFFFFFFFFU + * + * The second word of the region descriptor defines the 31-modulo-32 byte end + * address of the memory region. Writes to this register clear the region + * descriptor's valid bit (RGDn_WORD3[VLD]). + */ +typedef union _hw_mpu_rgdn_word1 +{ + uint32_t U; + struct _hw_mpu_rgdn_word1_bitfields + { + uint32_t RESERVED0 : 5; //!< [4:0] + uint32_t ENDADDR : 27; //!< [31:5] End Address + } B; +} hw_mpu_rgdn_word1_t; +#endif + +/*! + * @name Constants and macros for entire MPU_RGDn_WORD1 register + */ +//@{ +#define HW_MPU_RGDn_WORD1_COUNT (12U) + +#define HW_MPU_RGDn_WORD1_ADDR(n) (REGS_MPU_BASE + 0x404U + (0x10U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_MPU_RGDn_WORD1(n) (*(__IO hw_mpu_rgdn_word1_t *) HW_MPU_RGDn_WORD1_ADDR(n)) +#define HW_MPU_RGDn_WORD1_RD(n) (HW_MPU_RGDn_WORD1(n).U) +#define HW_MPU_RGDn_WORD1_WR(n, v) (HW_MPU_RGDn_WORD1(n).U = (v)) +#define HW_MPU_RGDn_WORD1_SET(n, v) (HW_MPU_RGDn_WORD1_WR(n, HW_MPU_RGDn_WORD1_RD(n) | (v))) +#define HW_MPU_RGDn_WORD1_CLR(n, v) (HW_MPU_RGDn_WORD1_WR(n, HW_MPU_RGDn_WORD1_RD(n) & ~(v))) +#define HW_MPU_RGDn_WORD1_TOG(n, v) (HW_MPU_RGDn_WORD1_WR(n, HW_MPU_RGDn_WORD1_RD(n) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual MPU_RGDn_WORD1 bitfields + */ + +/*! + * @name Register MPU_RGDn_WORD1, field ENDADDR[31:5] (RW) + * + * Defines the most significant bits of the 31-modulo-32 byte end address of the + * memory region. The MPU does not verify that ENDADDR >= SRTADDR. + */ +//@{ +#define BP_MPU_RGDn_WORD1_ENDADDR (5U) //!< Bit position for MPU_RGDn_WORD1_ENDADDR. +#define BM_MPU_RGDn_WORD1_ENDADDR (0xFFFFFFE0U) //!< Bit mask for MPU_RGDn_WORD1_ENDADDR. +#define BS_MPU_RGDn_WORD1_ENDADDR (27U) //!< Bit field size in bits for MPU_RGDn_WORD1_ENDADDR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD1_ENDADDR field. +#define BR_MPU_RGDn_WORD1_ENDADDR(n) (HW_MPU_RGDn_WORD1(n).B.ENDADDR) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD1_ENDADDR. +#define BF_MPU_RGDn_WORD1_ENDADDR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD1_ENDADDR), uint32_t) & BM_MPU_RGDn_WORD1_ENDADDR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ENDADDR field to a new value. +#define BW_MPU_RGDn_WORD1_ENDADDR(n, v) (HW_MPU_RGDn_WORD1_WR(n, (HW_MPU_RGDn_WORD1_RD(n) & ~BM_MPU_RGDn_WORD1_ENDADDR) | BF_MPU_RGDn_WORD1_ENDADDR(v))) +#endif +//@} +//------------------------------------------------------------------------------------------- +// HW_MPU_RGDn_WORD2 - Region Descriptor n, Word 2 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_MPU_RGDn_WORD2 - Region Descriptor n, Word 2 (RW) + * + * Reset value: 0x0061F7DFU + * + * The third word of the region descriptor defines the access control rights of + * the memory region. The access control privileges depend on two broad + * classifications of bus masters: Bus masters 0-3 have a 5-bit field defining separate + * privilege rights for user and supervisor mode accesses, as well as the optional + * inclusion of a process identification field within the definition. Bus masters + * 4-7 are limited to separate read and write permissions. For the privilege + * rights of bus masters 0-3, there are three flags associated with this function: + * Read (r) refers to accessing the referenced memory address using an operand + * (data) fetch Write (w) refers to updating the referenced memory address using a + * store (data) instruction Execute (x) refers to reading the referenced memory + * address using an instruction fetch Writes to RGDn_WORD2 clear the region + * descriptor's valid bit (RGDn_WORD3[VLD]). If only updating the access controls, write + * to RGDAACn instead because stores to these locations do not affect the + * descriptor's valid bit. + */ +typedef union _hw_mpu_rgdn_word2 +{ + uint32_t U; + struct _hw_mpu_rgdn_word2_bitfields + { + uint32_t M0UM : 3; //!< [2:0] Bus Master 0 User Mode Access Control + uint32_t M0SM : 2; //!< [4:3] Bus Master 0 Supervisor Mode Access + //! Control + uint32_t M0PE : 1; //!< [5] Bus Master 0 Process Identifier enable + uint32_t M1UM : 3; //!< [8:6] Bus Master 1 User Mode Access Control + uint32_t M1SM : 2; //!< [10:9] Bus Master 1 Supervisor Mode Access + //! Control + uint32_t M1PE : 1; //!< [11] Bus Master 1 Process Identifier enable + uint32_t M2UM : 3; //!< [14:12] Bus Master 2 User Mode Access control + uint32_t M2SM : 2; //!< [16:15] Bus Master 2 Supervisor Mode Access + //! Control + uint32_t M2PE : 1; //!< [17] Bus Master 2 Process Identifier Enable + uint32_t M3UM : 3; //!< [20:18] Bus Master 3 User Mode Access Control + uint32_t M3SM : 2; //!< [22:21] Bus Master 3 Supervisor Mode Access + //! Control + uint32_t M3PE : 1; //!< [23] Bus Master 3 Process Identifier Enable + uint32_t M4WE : 1; //!< [24] Bus Master 4 Write Enable + uint32_t M4RE : 1; //!< [25] Bus Master 4 Read Enable + uint32_t M5WE : 1; //!< [26] Bus Master 5 Write Enable + uint32_t M5RE : 1; //!< [27] Bus Master 5 Read Enable + uint32_t M6WE : 1; //!< [28] Bus Master 6 Write Enable + uint32_t M6RE : 1; //!< [29] Bus Master 6 Read Enable + uint32_t M7WE : 1; //!< [30] Bus Master 7 Write Enable + uint32_t M7RE : 1; //!< [31] Bus Master 7 Read Enable + } B; +} hw_mpu_rgdn_word2_t; +#endif + +/*! + * @name Constants and macros for entire MPU_RGDn_WORD2 register + */ +//@{ +#define HW_MPU_RGDn_WORD2_COUNT (12U) + +#define HW_MPU_RGDn_WORD2_ADDR(n) (REGS_MPU_BASE + 0x408U + (0x10U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_MPU_RGDn_WORD2(n) (*(__IO hw_mpu_rgdn_word2_t *) HW_MPU_RGDn_WORD2_ADDR(n)) +#define HW_MPU_RGDn_WORD2_RD(n) (HW_MPU_RGDn_WORD2(n).U) +#define HW_MPU_RGDn_WORD2_WR(n, v) (HW_MPU_RGDn_WORD2(n).U = (v)) +#define HW_MPU_RGDn_WORD2_SET(n, v) (HW_MPU_RGDn_WORD2_WR(n, HW_MPU_RGDn_WORD2_RD(n) | (v))) +#define HW_MPU_RGDn_WORD2_CLR(n, v) (HW_MPU_RGDn_WORD2_WR(n, HW_MPU_RGDn_WORD2_RD(n) & ~(v))) +#define HW_MPU_RGDn_WORD2_TOG(n, v) (HW_MPU_RGDn_WORD2_WR(n, HW_MPU_RGDn_WORD2_RD(n) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual MPU_RGDn_WORD2 bitfields + */ + +/*! + * @name Register MPU_RGDn_WORD2, field M0UM[2:0] (RW) + * + * See M3UM description. + */ +//@{ +#define BP_MPU_RGDn_WORD2_M0UM (0U) //!< Bit position for MPU_RGDn_WORD2_M0UM. +#define BM_MPU_RGDn_WORD2_M0UM (0x00000007U) //!< Bit mask for MPU_RGDn_WORD2_M0UM. +#define BS_MPU_RGDn_WORD2_M0UM (3U) //!< Bit field size in bits for MPU_RGDn_WORD2_M0UM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M0UM field. +#define BR_MPU_RGDn_WORD2_M0UM(n) (HW_MPU_RGDn_WORD2(n).B.M0UM) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M0UM. +#define BF_MPU_RGDn_WORD2_M0UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M0UM), uint32_t) & BM_MPU_RGDn_WORD2_M0UM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M0UM field to a new value. +#define BW_MPU_RGDn_WORD2_M0UM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M0UM) | BF_MPU_RGDn_WORD2_M0UM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M0SM[4:3] (RW) + * + * See M3SM description. + */ +//@{ +#define BP_MPU_RGDn_WORD2_M0SM (3U) //!< Bit position for MPU_RGDn_WORD2_M0SM. +#define BM_MPU_RGDn_WORD2_M0SM (0x00000018U) //!< Bit mask for MPU_RGDn_WORD2_M0SM. +#define BS_MPU_RGDn_WORD2_M0SM (2U) //!< Bit field size in bits for MPU_RGDn_WORD2_M0SM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M0SM field. +#define BR_MPU_RGDn_WORD2_M0SM(n) (HW_MPU_RGDn_WORD2(n).B.M0SM) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M0SM. +#define BF_MPU_RGDn_WORD2_M0SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M0SM), uint32_t) & BM_MPU_RGDn_WORD2_M0SM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M0SM field to a new value. +#define BW_MPU_RGDn_WORD2_M0SM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M0SM) | BF_MPU_RGDn_WORD2_M0SM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M0PE[5] (RW) + * + * See M0PE description. + */ +//@{ +#define BP_MPU_RGDn_WORD2_M0PE (5U) //!< Bit position for MPU_RGDn_WORD2_M0PE. +#define BM_MPU_RGDn_WORD2_M0PE (0x00000020U) //!< Bit mask for MPU_RGDn_WORD2_M0PE. +#define BS_MPU_RGDn_WORD2_M0PE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M0PE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M0PE field. +#define BR_MPU_RGDn_WORD2_M0PE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M0PE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M0PE. +#define BF_MPU_RGDn_WORD2_M0PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M0PE), uint32_t) & BM_MPU_RGDn_WORD2_M0PE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M0PE field to a new value. +#define BW_MPU_RGDn_WORD2_M0PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M0PE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M1UM[8:6] (RW) + * + * See M3UM description. + */ +//@{ +#define BP_MPU_RGDn_WORD2_M1UM (6U) //!< Bit position for MPU_RGDn_WORD2_M1UM. +#define BM_MPU_RGDn_WORD2_M1UM (0x000001C0U) //!< Bit mask for MPU_RGDn_WORD2_M1UM. +#define BS_MPU_RGDn_WORD2_M1UM (3U) //!< Bit field size in bits for MPU_RGDn_WORD2_M1UM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M1UM field. +#define BR_MPU_RGDn_WORD2_M1UM(n) (HW_MPU_RGDn_WORD2(n).B.M1UM) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M1UM. +#define BF_MPU_RGDn_WORD2_M1UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M1UM), uint32_t) & BM_MPU_RGDn_WORD2_M1UM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M1UM field to a new value. +#define BW_MPU_RGDn_WORD2_M1UM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M1UM) | BF_MPU_RGDn_WORD2_M1UM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M1SM[10:9] (RW) + * + * See M3SM description. + */ +//@{ +#define BP_MPU_RGDn_WORD2_M1SM (9U) //!< Bit position for MPU_RGDn_WORD2_M1SM. +#define BM_MPU_RGDn_WORD2_M1SM (0x00000600U) //!< Bit mask for MPU_RGDn_WORD2_M1SM. +#define BS_MPU_RGDn_WORD2_M1SM (2U) //!< Bit field size in bits for MPU_RGDn_WORD2_M1SM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M1SM field. +#define BR_MPU_RGDn_WORD2_M1SM(n) (HW_MPU_RGDn_WORD2(n).B.M1SM) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M1SM. +#define BF_MPU_RGDn_WORD2_M1SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M1SM), uint32_t) & BM_MPU_RGDn_WORD2_M1SM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M1SM field to a new value. +#define BW_MPU_RGDn_WORD2_M1SM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M1SM) | BF_MPU_RGDn_WORD2_M1SM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M1PE[11] (RW) + * + * See M3PE description. + */ +//@{ +#define BP_MPU_RGDn_WORD2_M1PE (11U) //!< Bit position for MPU_RGDn_WORD2_M1PE. +#define BM_MPU_RGDn_WORD2_M1PE (0x00000800U) //!< Bit mask for MPU_RGDn_WORD2_M1PE. +#define BS_MPU_RGDn_WORD2_M1PE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M1PE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M1PE field. +#define BR_MPU_RGDn_WORD2_M1PE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M1PE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M1PE. +#define BF_MPU_RGDn_WORD2_M1PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M1PE), uint32_t) & BM_MPU_RGDn_WORD2_M1PE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M1PE field to a new value. +#define BW_MPU_RGDn_WORD2_M1PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M1PE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M2UM[14:12] (RW) + * + * See M3UM description. + */ +//@{ +#define BP_MPU_RGDn_WORD2_M2UM (12U) //!< Bit position for MPU_RGDn_WORD2_M2UM. +#define BM_MPU_RGDn_WORD2_M2UM (0x00007000U) //!< Bit mask for MPU_RGDn_WORD2_M2UM. +#define BS_MPU_RGDn_WORD2_M2UM (3U) //!< Bit field size in bits for MPU_RGDn_WORD2_M2UM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M2UM field. +#define BR_MPU_RGDn_WORD2_M2UM(n) (HW_MPU_RGDn_WORD2(n).B.M2UM) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M2UM. +#define BF_MPU_RGDn_WORD2_M2UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M2UM), uint32_t) & BM_MPU_RGDn_WORD2_M2UM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M2UM field to a new value. +#define BW_MPU_RGDn_WORD2_M2UM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M2UM) | BF_MPU_RGDn_WORD2_M2UM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M2SM[16:15] (RW) + * + * See M3SM description. + */ +//@{ +#define BP_MPU_RGDn_WORD2_M2SM (15U) //!< Bit position for MPU_RGDn_WORD2_M2SM. +#define BM_MPU_RGDn_WORD2_M2SM (0x00018000U) //!< Bit mask for MPU_RGDn_WORD2_M2SM. +#define BS_MPU_RGDn_WORD2_M2SM (2U) //!< Bit field size in bits for MPU_RGDn_WORD2_M2SM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M2SM field. +#define BR_MPU_RGDn_WORD2_M2SM(n) (HW_MPU_RGDn_WORD2(n).B.M2SM) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M2SM. +#define BF_MPU_RGDn_WORD2_M2SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M2SM), uint32_t) & BM_MPU_RGDn_WORD2_M2SM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M2SM field to a new value. +#define BW_MPU_RGDn_WORD2_M2SM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M2SM) | BF_MPU_RGDn_WORD2_M2SM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M2PE[17] (RW) + * + * See M3PE description. + */ +//@{ +#define BP_MPU_RGDn_WORD2_M2PE (17U) //!< Bit position for MPU_RGDn_WORD2_M2PE. +#define BM_MPU_RGDn_WORD2_M2PE (0x00020000U) //!< Bit mask for MPU_RGDn_WORD2_M2PE. +#define BS_MPU_RGDn_WORD2_M2PE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M2PE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M2PE field. +#define BR_MPU_RGDn_WORD2_M2PE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M2PE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M2PE. +#define BF_MPU_RGDn_WORD2_M2PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M2PE), uint32_t) & BM_MPU_RGDn_WORD2_M2PE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M2PE field to a new value. +#define BW_MPU_RGDn_WORD2_M2PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M2PE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M3UM[20:18] (RW) + * + * Defines the access controls for bus master 3 in User mode. M3UM consists of + * three independent bits, enabling read (r), write (w), and execute (x) + * permissions. + * + * Values: + * - 0 - An attempted access of that mode may be terminated with an access error + * (if not allowed by another descriptor) and the access not performed. + * - 1 - Allows the given access type to occur + */ +//@{ +#define BP_MPU_RGDn_WORD2_M3UM (18U) //!< Bit position for MPU_RGDn_WORD2_M3UM. +#define BM_MPU_RGDn_WORD2_M3UM (0x001C0000U) //!< Bit mask for MPU_RGDn_WORD2_M3UM. +#define BS_MPU_RGDn_WORD2_M3UM (3U) //!< Bit field size in bits for MPU_RGDn_WORD2_M3UM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M3UM field. +#define BR_MPU_RGDn_WORD2_M3UM(n) (HW_MPU_RGDn_WORD2(n).B.M3UM) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M3UM. +#define BF_MPU_RGDn_WORD2_M3UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M3UM), uint32_t) & BM_MPU_RGDn_WORD2_M3UM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M3UM field to a new value. +#define BW_MPU_RGDn_WORD2_M3UM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M3UM) | BF_MPU_RGDn_WORD2_M3UM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M3SM[22:21] (RW) + * + * Defines the access controls for bus master 3 in Supervisor mode. + * + * Values: + * - 00 - r/w/x; read, write and execute allowed + * - 01 - r/x; read and execute allowed, but no write + * - 10 - r/w; read and write allowed, but no execute + * - 11 - Same as User mode defined in M3UM + */ +//@{ +#define BP_MPU_RGDn_WORD2_M3SM (21U) //!< Bit position for MPU_RGDn_WORD2_M3SM. +#define BM_MPU_RGDn_WORD2_M3SM (0x00600000U) //!< Bit mask for MPU_RGDn_WORD2_M3SM. +#define BS_MPU_RGDn_WORD2_M3SM (2U) //!< Bit field size in bits for MPU_RGDn_WORD2_M3SM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M3SM field. +#define BR_MPU_RGDn_WORD2_M3SM(n) (HW_MPU_RGDn_WORD2(n).B.M3SM) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M3SM. +#define BF_MPU_RGDn_WORD2_M3SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M3SM), uint32_t) & BM_MPU_RGDn_WORD2_M3SM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M3SM field to a new value. +#define BW_MPU_RGDn_WORD2_M3SM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M3SM) | BF_MPU_RGDn_WORD2_M3SM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M3PE[23] (RW) + * + * Values: + * - 0 - Do not include the process identifier in the evaluation + * - 1 - Include the process identifier and mask (RGDn_WORD3) in the region hit + * evaluation + */ +//@{ +#define BP_MPU_RGDn_WORD2_M3PE (23U) //!< Bit position for MPU_RGDn_WORD2_M3PE. +#define BM_MPU_RGDn_WORD2_M3PE (0x00800000U) //!< Bit mask for MPU_RGDn_WORD2_M3PE. +#define BS_MPU_RGDn_WORD2_M3PE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M3PE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M3PE field. +#define BR_MPU_RGDn_WORD2_M3PE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M3PE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M3PE. +#define BF_MPU_RGDn_WORD2_M3PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M3PE), uint32_t) & BM_MPU_RGDn_WORD2_M3PE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M3PE field to a new value. +#define BW_MPU_RGDn_WORD2_M3PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M3PE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M4WE[24] (RW) + * + * Values: + * - 0 - Bus master 4 writes terminate with an access error and the write is not + * performed + * - 1 - Bus master 4 writes allowed + */ +//@{ +#define BP_MPU_RGDn_WORD2_M4WE (24U) //!< Bit position for MPU_RGDn_WORD2_M4WE. +#define BM_MPU_RGDn_WORD2_M4WE (0x01000000U) //!< Bit mask for MPU_RGDn_WORD2_M4WE. +#define BS_MPU_RGDn_WORD2_M4WE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M4WE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M4WE field. +#define BR_MPU_RGDn_WORD2_M4WE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M4WE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M4WE. +#define BF_MPU_RGDn_WORD2_M4WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M4WE), uint32_t) & BM_MPU_RGDn_WORD2_M4WE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M4WE field to a new value. +#define BW_MPU_RGDn_WORD2_M4WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M4WE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M4RE[25] (RW) + * + * Values: + * - 0 - Bus master 4 reads terminate with an access error and the read is not + * performed + * - 1 - Bus master 4 reads allowed + */ +//@{ +#define BP_MPU_RGDn_WORD2_M4RE (25U) //!< Bit position for MPU_RGDn_WORD2_M4RE. +#define BM_MPU_RGDn_WORD2_M4RE (0x02000000U) //!< Bit mask for MPU_RGDn_WORD2_M4RE. +#define BS_MPU_RGDn_WORD2_M4RE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M4RE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M4RE field. +#define BR_MPU_RGDn_WORD2_M4RE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M4RE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M4RE. +#define BF_MPU_RGDn_WORD2_M4RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M4RE), uint32_t) & BM_MPU_RGDn_WORD2_M4RE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M4RE field to a new value. +#define BW_MPU_RGDn_WORD2_M4RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M4RE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M5WE[26] (RW) + * + * Values: + * - 0 - Bus master 5 writes terminate with an access error and the write is not + * performed + * - 1 - Bus master 5 writes allowed + */ +//@{ +#define BP_MPU_RGDn_WORD2_M5WE (26U) //!< Bit position for MPU_RGDn_WORD2_M5WE. +#define BM_MPU_RGDn_WORD2_M5WE (0x04000000U) //!< Bit mask for MPU_RGDn_WORD2_M5WE. +#define BS_MPU_RGDn_WORD2_M5WE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M5WE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M5WE field. +#define BR_MPU_RGDn_WORD2_M5WE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M5WE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M5WE. +#define BF_MPU_RGDn_WORD2_M5WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M5WE), uint32_t) & BM_MPU_RGDn_WORD2_M5WE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M5WE field to a new value. +#define BW_MPU_RGDn_WORD2_M5WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M5WE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M5RE[27] (RW) + * + * Values: + * - 0 - Bus master 5 reads terminate with an access error and the read is not + * performed + * - 1 - Bus master 5 reads allowed + */ +//@{ +#define BP_MPU_RGDn_WORD2_M5RE (27U) //!< Bit position for MPU_RGDn_WORD2_M5RE. +#define BM_MPU_RGDn_WORD2_M5RE (0x08000000U) //!< Bit mask for MPU_RGDn_WORD2_M5RE. +#define BS_MPU_RGDn_WORD2_M5RE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M5RE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M5RE field. +#define BR_MPU_RGDn_WORD2_M5RE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M5RE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M5RE. +#define BF_MPU_RGDn_WORD2_M5RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M5RE), uint32_t) & BM_MPU_RGDn_WORD2_M5RE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M5RE field to a new value. +#define BW_MPU_RGDn_WORD2_M5RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M5RE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M6WE[28] (RW) + * + * Values: + * - 0 - Bus master 6 writes terminate with an access error and the write is not + * performed + * - 1 - Bus master 6 writes allowed + */ +//@{ +#define BP_MPU_RGDn_WORD2_M6WE (28U) //!< Bit position for MPU_RGDn_WORD2_M6WE. +#define BM_MPU_RGDn_WORD2_M6WE (0x10000000U) //!< Bit mask for MPU_RGDn_WORD2_M6WE. +#define BS_MPU_RGDn_WORD2_M6WE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M6WE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M6WE field. +#define BR_MPU_RGDn_WORD2_M6WE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M6WE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M6WE. +#define BF_MPU_RGDn_WORD2_M6WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M6WE), uint32_t) & BM_MPU_RGDn_WORD2_M6WE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M6WE field to a new value. +#define BW_MPU_RGDn_WORD2_M6WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M6WE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M6RE[29] (RW) + * + * Values: + * - 0 - Bus master 6 reads terminate with an access error and the read is not + * performed + * - 1 - Bus master 6 reads allowed + */ +//@{ +#define BP_MPU_RGDn_WORD2_M6RE (29U) //!< Bit position for MPU_RGDn_WORD2_M6RE. +#define BM_MPU_RGDn_WORD2_M6RE (0x20000000U) //!< Bit mask for MPU_RGDn_WORD2_M6RE. +#define BS_MPU_RGDn_WORD2_M6RE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M6RE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M6RE field. +#define BR_MPU_RGDn_WORD2_M6RE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M6RE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M6RE. +#define BF_MPU_RGDn_WORD2_M6RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M6RE), uint32_t) & BM_MPU_RGDn_WORD2_M6RE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M6RE field to a new value. +#define BW_MPU_RGDn_WORD2_M6RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M6RE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M7WE[30] (RW) + * + * Values: + * - 0 - Bus master 7 writes terminate with an access error and the write is not + * performed + * - 1 - Bus master 7 writes allowed + */ +//@{ +#define BP_MPU_RGDn_WORD2_M7WE (30U) //!< Bit position for MPU_RGDn_WORD2_M7WE. +#define BM_MPU_RGDn_WORD2_M7WE (0x40000000U) //!< Bit mask for MPU_RGDn_WORD2_M7WE. +#define BS_MPU_RGDn_WORD2_M7WE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M7WE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M7WE field. +#define BR_MPU_RGDn_WORD2_M7WE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M7WE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M7WE. +#define BF_MPU_RGDn_WORD2_M7WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M7WE), uint32_t) & BM_MPU_RGDn_WORD2_M7WE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M7WE field to a new value. +#define BW_MPU_RGDn_WORD2_M7WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M7WE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD2, field M7RE[31] (RW) + * + * Values: + * - 0 - Bus master 7 reads terminate with an access error and the read is not + * performed + * - 1 - Bus master 7 reads allowed + */ +//@{ +#define BP_MPU_RGDn_WORD2_M7RE (31U) //!< Bit position for MPU_RGDn_WORD2_M7RE. +#define BM_MPU_RGDn_WORD2_M7RE (0x80000000U) //!< Bit mask for MPU_RGDn_WORD2_M7RE. +#define BS_MPU_RGDn_WORD2_M7RE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M7RE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD2_M7RE field. +#define BR_MPU_RGDn_WORD2_M7RE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M7RE)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD2_M7RE. +#define BF_MPU_RGDn_WORD2_M7RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M7RE), uint32_t) & BM_MPU_RGDn_WORD2_M7RE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M7RE field to a new value. +#define BW_MPU_RGDn_WORD2_M7RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M7RE) = (v)) +#endif +//@} +//------------------------------------------------------------------------------------------- +// HW_MPU_RGDn_WORD3 - Region Descriptor n, Word 3 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_MPU_RGDn_WORD3 - Region Descriptor n, Word 3 (RW) + * + * Reset value: 0x00000001U + * + * The fourth word of the region descriptor contains the optional process + * identifier and mask, plus the region descriptor's valid bit. + */ +typedef union _hw_mpu_rgdn_word3 +{ + uint32_t U; + struct _hw_mpu_rgdn_word3_bitfields + { + uint32_t VLD : 1; //!< [0] Valid + uint32_t RESERVED0 : 15; //!< [15:1] + uint32_t PIDMASK : 8; //!< [23:16] Process Identifier Mask + uint32_t PID : 8; //!< [31:24] Process Identifier + } B; +} hw_mpu_rgdn_word3_t; +#endif + +/*! + * @name Constants and macros for entire MPU_RGDn_WORD3 register + */ +//@{ +#define HW_MPU_RGDn_WORD3_COUNT (12U) + +#define HW_MPU_RGDn_WORD3_ADDR(n) (REGS_MPU_BASE + 0x40CU + (0x10U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_MPU_RGDn_WORD3(n) (*(__IO hw_mpu_rgdn_word3_t *) HW_MPU_RGDn_WORD3_ADDR(n)) +#define HW_MPU_RGDn_WORD3_RD(n) (HW_MPU_RGDn_WORD3(n).U) +#define HW_MPU_RGDn_WORD3_WR(n, v) (HW_MPU_RGDn_WORD3(n).U = (v)) +#define HW_MPU_RGDn_WORD3_SET(n, v) (HW_MPU_RGDn_WORD3_WR(n, HW_MPU_RGDn_WORD3_RD(n) | (v))) +#define HW_MPU_RGDn_WORD3_CLR(n, v) (HW_MPU_RGDn_WORD3_WR(n, HW_MPU_RGDn_WORD3_RD(n) & ~(v))) +#define HW_MPU_RGDn_WORD3_TOG(n, v) (HW_MPU_RGDn_WORD3_WR(n, HW_MPU_RGDn_WORD3_RD(n) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual MPU_RGDn_WORD3 bitfields + */ + +/*! + * @name Register MPU_RGDn_WORD3, field VLD[0] (RW) + * + * Signals the region descriptor is valid. Any write to RGDn_WORD0-2 clears this + * bit. + * + * Values: + * - 0 - Region descriptor is invalid + * - 1 - Region descriptor is valid + */ +//@{ +#define BP_MPU_RGDn_WORD3_VLD (0U) //!< Bit position for MPU_RGDn_WORD3_VLD. +#define BM_MPU_RGDn_WORD3_VLD (0x00000001U) //!< Bit mask for MPU_RGDn_WORD3_VLD. +#define BS_MPU_RGDn_WORD3_VLD (1U) //!< Bit field size in bits for MPU_RGDn_WORD3_VLD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD3_VLD field. +#define BR_MPU_RGDn_WORD3_VLD(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD3_ADDR(n), BP_MPU_RGDn_WORD3_VLD)) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD3_VLD. +#define BF_MPU_RGDn_WORD3_VLD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD3_VLD), uint32_t) & BM_MPU_RGDn_WORD3_VLD) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the VLD field to a new value. +#define BW_MPU_RGDn_WORD3_VLD(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD3_ADDR(n), BP_MPU_RGDn_WORD3_VLD) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD3, field PIDMASK[23:16] (RW) + * + * Provides a masking capability so that multiple process identifiers can be + * included as part of the region hit determination. If a bit in PIDMASK is set, + * then the corresponding PID bit is ignored in the comparison. This field and PID + * are included in the region hit determination if RGDn_WORD2[MxPE] is set. For + * more information on the handling of the PID and PIDMASK, see "Access Evaluation + * - Hit Determination." + */ +//@{ +#define BP_MPU_RGDn_WORD3_PIDMASK (16U) //!< Bit position for MPU_RGDn_WORD3_PIDMASK. +#define BM_MPU_RGDn_WORD3_PIDMASK (0x00FF0000U) //!< Bit mask for MPU_RGDn_WORD3_PIDMASK. +#define BS_MPU_RGDn_WORD3_PIDMASK (8U) //!< Bit field size in bits for MPU_RGDn_WORD3_PIDMASK. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD3_PIDMASK field. +#define BR_MPU_RGDn_WORD3_PIDMASK(n) (HW_MPU_RGDn_WORD3(n).B.PIDMASK) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD3_PIDMASK. +#define BF_MPU_RGDn_WORD3_PIDMASK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD3_PIDMASK), uint32_t) & BM_MPU_RGDn_WORD3_PIDMASK) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PIDMASK field to a new value. +#define BW_MPU_RGDn_WORD3_PIDMASK(n, v) (HW_MPU_RGDn_WORD3_WR(n, (HW_MPU_RGDn_WORD3_RD(n) & ~BM_MPU_RGDn_WORD3_PIDMASK) | BF_MPU_RGDn_WORD3_PIDMASK(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDn_WORD3, field PID[31:24] (RW) + * + * Specifies the process identifier that is included in the region hit + * determination if RGDn_WORD2[MxPE] is set. PIDMASK can mask individual bits in this + * field. + */ +//@{ +#define BP_MPU_RGDn_WORD3_PID (24U) //!< Bit position for MPU_RGDn_WORD3_PID. +#define BM_MPU_RGDn_WORD3_PID (0xFF000000U) //!< Bit mask for MPU_RGDn_WORD3_PID. +#define BS_MPU_RGDn_WORD3_PID (8U) //!< Bit field size in bits for MPU_RGDn_WORD3_PID. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDn_WORD3_PID field. +#define BR_MPU_RGDn_WORD3_PID(n) (HW_MPU_RGDn_WORD3(n).B.PID) +#endif + +//! @brief Format value for bitfield MPU_RGDn_WORD3_PID. +#define BF_MPU_RGDn_WORD3_PID(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD3_PID), uint32_t) & BM_MPU_RGDn_WORD3_PID) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PID field to a new value. +#define BW_MPU_RGDn_WORD3_PID(n, v) (HW_MPU_RGDn_WORD3_WR(n, (HW_MPU_RGDn_WORD3_RD(n) & ~BM_MPU_RGDn_WORD3_PID) | BF_MPU_RGDn_WORD3_PID(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_MPU_RGDAACn - Region Descriptor Alternate Access Control n +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_MPU_RGDAACn - Region Descriptor Alternate Access Control n (RW) + * + * Reset value: 0x0061F7DFU + * + * Because software may adjust only the access controls within a region + * descriptor (RGDn_WORD2) as different tasks execute, an alternate programming view of + * this 32-bit entity is available. Writing to this register does not affect the + * descriptor's valid bit. + */ +typedef union _hw_mpu_rgdaacn +{ + uint32_t U; + struct _hw_mpu_rgdaacn_bitfields + { + uint32_t M0UM : 3; //!< [2:0] Bus Master 0 User Mode Access Control + uint32_t M0SM : 2; //!< [4:3] Bus Master 0 Supervisor Mode Access + //! Control + uint32_t M0PE : 1; //!< [5] Bus Master 0 Process Identifier Enable + uint32_t M1UM : 3; //!< [8:6] Bus Master 1 User Mode Access Control + uint32_t M1SM : 2; //!< [10:9] Bus Master 1 Supervisor Mode Access + //! Control + uint32_t M1PE : 1; //!< [11] Bus Master 1 Process Identifier Enable + uint32_t M2UM : 3; //!< [14:12] Bus Master 2 User Mode Access Control + uint32_t M2SM : 2; //!< [16:15] Bus Master 2 Supervisor Mode Access + //! Control + uint32_t M2PE : 1; //!< [17] Bus Master 2 Process Identifier Enable + uint32_t M3UM : 3; //!< [20:18] Bus Master 3 User Mode Access Control + uint32_t M3SM : 2; //!< [22:21] Bus Master 3 Supervisor Mode Access + //! Control + uint32_t M3PE : 1; //!< [23] Bus Master 3 Process Identifier Enable + uint32_t M4WE : 1; //!< [24] Bus Master 4 Write Enable + uint32_t M4RE : 1; //!< [25] Bus Master 4 Read Enable + uint32_t M5WE : 1; //!< [26] Bus Master 5 Write Enable + uint32_t M5RE : 1; //!< [27] Bus Master 5 Read Enable + uint32_t M6WE : 1; //!< [28] Bus Master 6 Write Enable + uint32_t M6RE : 1; //!< [29] Bus Master 6 Read Enable + uint32_t M7WE : 1; //!< [30] Bus Master 7 Write Enable + uint32_t M7RE : 1; //!< [31] Bus Master 7 Read Enable + } B; +} hw_mpu_rgdaacn_t; +#endif + +/*! + * @name Constants and macros for entire MPU_RGDAACn register + */ +//@{ +#define HW_MPU_RGDAACn_COUNT (12U) + +#define HW_MPU_RGDAACn_ADDR(n) (REGS_MPU_BASE + 0x800U + (0x4U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_MPU_RGDAACn(n) (*(__IO hw_mpu_rgdaacn_t *) HW_MPU_RGDAACn_ADDR(n)) +#define HW_MPU_RGDAACn_RD(n) (HW_MPU_RGDAACn(n).U) +#define HW_MPU_RGDAACn_WR(n, v) (HW_MPU_RGDAACn(n).U = (v)) +#define HW_MPU_RGDAACn_SET(n, v) (HW_MPU_RGDAACn_WR(n, HW_MPU_RGDAACn_RD(n) | (v))) +#define HW_MPU_RGDAACn_CLR(n, v) (HW_MPU_RGDAACn_WR(n, HW_MPU_RGDAACn_RD(n) & ~(v))) +#define HW_MPU_RGDAACn_TOG(n, v) (HW_MPU_RGDAACn_WR(n, HW_MPU_RGDAACn_RD(n) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual MPU_RGDAACn bitfields + */ + +/*! + * @name Register MPU_RGDAACn, field M0UM[2:0] (RW) + * + * See M3UM description. + */ +//@{ +#define BP_MPU_RGDAACn_M0UM (0U) //!< Bit position for MPU_RGDAACn_M0UM. +#define BM_MPU_RGDAACn_M0UM (0x00000007U) //!< Bit mask for MPU_RGDAACn_M0UM. +#define BS_MPU_RGDAACn_M0UM (3U) //!< Bit field size in bits for MPU_RGDAACn_M0UM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M0UM field. +#define BR_MPU_RGDAACn_M0UM(n) (HW_MPU_RGDAACn(n).B.M0UM) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M0UM. +#define BF_MPU_RGDAACn_M0UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M0UM), uint32_t) & BM_MPU_RGDAACn_M0UM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M0UM field to a new value. +#define BW_MPU_RGDAACn_M0UM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M0UM) | BF_MPU_RGDAACn_M0UM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M0SM[4:3] (RW) + * + * See M3SM description. + */ +//@{ +#define BP_MPU_RGDAACn_M0SM (3U) //!< Bit position for MPU_RGDAACn_M0SM. +#define BM_MPU_RGDAACn_M0SM (0x00000018U) //!< Bit mask for MPU_RGDAACn_M0SM. +#define BS_MPU_RGDAACn_M0SM (2U) //!< Bit field size in bits for MPU_RGDAACn_M0SM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M0SM field. +#define BR_MPU_RGDAACn_M0SM(n) (HW_MPU_RGDAACn(n).B.M0SM) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M0SM. +#define BF_MPU_RGDAACn_M0SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M0SM), uint32_t) & BM_MPU_RGDAACn_M0SM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M0SM field to a new value. +#define BW_MPU_RGDAACn_M0SM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M0SM) | BF_MPU_RGDAACn_M0SM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M0PE[5] (RW) + * + * See M3PE description. + */ +//@{ +#define BP_MPU_RGDAACn_M0PE (5U) //!< Bit position for MPU_RGDAACn_M0PE. +#define BM_MPU_RGDAACn_M0PE (0x00000020U) //!< Bit mask for MPU_RGDAACn_M0PE. +#define BS_MPU_RGDAACn_M0PE (1U) //!< Bit field size in bits for MPU_RGDAACn_M0PE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M0PE field. +#define BR_MPU_RGDAACn_M0PE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M0PE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M0PE. +#define BF_MPU_RGDAACn_M0PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M0PE), uint32_t) & BM_MPU_RGDAACn_M0PE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M0PE field to a new value. +#define BW_MPU_RGDAACn_M0PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M0PE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M1UM[8:6] (RW) + * + * See M3UM description. + */ +//@{ +#define BP_MPU_RGDAACn_M1UM (6U) //!< Bit position for MPU_RGDAACn_M1UM. +#define BM_MPU_RGDAACn_M1UM (0x000001C0U) //!< Bit mask for MPU_RGDAACn_M1UM. +#define BS_MPU_RGDAACn_M1UM (3U) //!< Bit field size in bits for MPU_RGDAACn_M1UM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M1UM field. +#define BR_MPU_RGDAACn_M1UM(n) (HW_MPU_RGDAACn(n).B.M1UM) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M1UM. +#define BF_MPU_RGDAACn_M1UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M1UM), uint32_t) & BM_MPU_RGDAACn_M1UM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M1UM field to a new value. +#define BW_MPU_RGDAACn_M1UM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M1UM) | BF_MPU_RGDAACn_M1UM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M1SM[10:9] (RW) + * + * See M3SM description. + */ +//@{ +#define BP_MPU_RGDAACn_M1SM (9U) //!< Bit position for MPU_RGDAACn_M1SM. +#define BM_MPU_RGDAACn_M1SM (0x00000600U) //!< Bit mask for MPU_RGDAACn_M1SM. +#define BS_MPU_RGDAACn_M1SM (2U) //!< Bit field size in bits for MPU_RGDAACn_M1SM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M1SM field. +#define BR_MPU_RGDAACn_M1SM(n) (HW_MPU_RGDAACn(n).B.M1SM) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M1SM. +#define BF_MPU_RGDAACn_M1SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M1SM), uint32_t) & BM_MPU_RGDAACn_M1SM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M1SM field to a new value. +#define BW_MPU_RGDAACn_M1SM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M1SM) | BF_MPU_RGDAACn_M1SM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M1PE[11] (RW) + * + * See M3PE description. + */ +//@{ +#define BP_MPU_RGDAACn_M1PE (11U) //!< Bit position for MPU_RGDAACn_M1PE. +#define BM_MPU_RGDAACn_M1PE (0x00000800U) //!< Bit mask for MPU_RGDAACn_M1PE. +#define BS_MPU_RGDAACn_M1PE (1U) //!< Bit field size in bits for MPU_RGDAACn_M1PE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M1PE field. +#define BR_MPU_RGDAACn_M1PE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M1PE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M1PE. +#define BF_MPU_RGDAACn_M1PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M1PE), uint32_t) & BM_MPU_RGDAACn_M1PE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M1PE field to a new value. +#define BW_MPU_RGDAACn_M1PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M1PE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M2UM[14:12] (RW) + * + * See M3UM description. + */ +//@{ +#define BP_MPU_RGDAACn_M2UM (12U) //!< Bit position for MPU_RGDAACn_M2UM. +#define BM_MPU_RGDAACn_M2UM (0x00007000U) //!< Bit mask for MPU_RGDAACn_M2UM. +#define BS_MPU_RGDAACn_M2UM (3U) //!< Bit field size in bits for MPU_RGDAACn_M2UM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M2UM field. +#define BR_MPU_RGDAACn_M2UM(n) (HW_MPU_RGDAACn(n).B.M2UM) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M2UM. +#define BF_MPU_RGDAACn_M2UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M2UM), uint32_t) & BM_MPU_RGDAACn_M2UM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M2UM field to a new value. +#define BW_MPU_RGDAACn_M2UM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M2UM) | BF_MPU_RGDAACn_M2UM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M2SM[16:15] (RW) + * + * See M3SM description. + */ +//@{ +#define BP_MPU_RGDAACn_M2SM (15U) //!< Bit position for MPU_RGDAACn_M2SM. +#define BM_MPU_RGDAACn_M2SM (0x00018000U) //!< Bit mask for MPU_RGDAACn_M2SM. +#define BS_MPU_RGDAACn_M2SM (2U) //!< Bit field size in bits for MPU_RGDAACn_M2SM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M2SM field. +#define BR_MPU_RGDAACn_M2SM(n) (HW_MPU_RGDAACn(n).B.M2SM) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M2SM. +#define BF_MPU_RGDAACn_M2SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M2SM), uint32_t) & BM_MPU_RGDAACn_M2SM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M2SM field to a new value. +#define BW_MPU_RGDAACn_M2SM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M2SM) | BF_MPU_RGDAACn_M2SM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M2PE[17] (RW) + * + * See M3PE description. + */ +//@{ +#define BP_MPU_RGDAACn_M2PE (17U) //!< Bit position for MPU_RGDAACn_M2PE. +#define BM_MPU_RGDAACn_M2PE (0x00020000U) //!< Bit mask for MPU_RGDAACn_M2PE. +#define BS_MPU_RGDAACn_M2PE (1U) //!< Bit field size in bits for MPU_RGDAACn_M2PE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M2PE field. +#define BR_MPU_RGDAACn_M2PE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M2PE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M2PE. +#define BF_MPU_RGDAACn_M2PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M2PE), uint32_t) & BM_MPU_RGDAACn_M2PE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M2PE field to a new value. +#define BW_MPU_RGDAACn_M2PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M2PE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M3UM[20:18] (RW) + * + * Defines the access controls for bus master 3 in user mode. M3UM consists of + * three independent bits, enabling read (r), write (w), and execute (x) + * permissions. + * + * Values: + * - 0 - An attempted access of that mode may be terminated with an access error + * (if not allowed by another descriptor) and the access not performed. + * - 1 - Allows the given access type to occur + */ +//@{ +#define BP_MPU_RGDAACn_M3UM (18U) //!< Bit position for MPU_RGDAACn_M3UM. +#define BM_MPU_RGDAACn_M3UM (0x001C0000U) //!< Bit mask for MPU_RGDAACn_M3UM. +#define BS_MPU_RGDAACn_M3UM (3U) //!< Bit field size in bits for MPU_RGDAACn_M3UM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M3UM field. +#define BR_MPU_RGDAACn_M3UM(n) (HW_MPU_RGDAACn(n).B.M3UM) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M3UM. +#define BF_MPU_RGDAACn_M3UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M3UM), uint32_t) & BM_MPU_RGDAACn_M3UM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M3UM field to a new value. +#define BW_MPU_RGDAACn_M3UM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M3UM) | BF_MPU_RGDAACn_M3UM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M3SM[22:21] (RW) + * + * Defines the access controls for bus master 3 in Supervisor mode. + * + * Values: + * - 00 - r/w/x; read, write and execute allowed + * - 01 - r/x; read and execute allowed, but no write + * - 10 - r/w; read and write allowed, but no execute + * - 11 - Same as User mode defined in M3UM + */ +//@{ +#define BP_MPU_RGDAACn_M3SM (21U) //!< Bit position for MPU_RGDAACn_M3SM. +#define BM_MPU_RGDAACn_M3SM (0x00600000U) //!< Bit mask for MPU_RGDAACn_M3SM. +#define BS_MPU_RGDAACn_M3SM (2U) //!< Bit field size in bits for MPU_RGDAACn_M3SM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M3SM field. +#define BR_MPU_RGDAACn_M3SM(n) (HW_MPU_RGDAACn(n).B.M3SM) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M3SM. +#define BF_MPU_RGDAACn_M3SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M3SM), uint32_t) & BM_MPU_RGDAACn_M3SM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M3SM field to a new value. +#define BW_MPU_RGDAACn_M3SM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M3SM) | BF_MPU_RGDAACn_M3SM(v))) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M3PE[23] (RW) + * + * Values: + * - 0 - Do not include the process identifier in the evaluation + * - 1 - Include the process identifier and mask (RGDn.RGDAAC) in the region hit + * evaluation + */ +//@{ +#define BP_MPU_RGDAACn_M3PE (23U) //!< Bit position for MPU_RGDAACn_M3PE. +#define BM_MPU_RGDAACn_M3PE (0x00800000U) //!< Bit mask for MPU_RGDAACn_M3PE. +#define BS_MPU_RGDAACn_M3PE (1U) //!< Bit field size in bits for MPU_RGDAACn_M3PE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M3PE field. +#define BR_MPU_RGDAACn_M3PE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M3PE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M3PE. +#define BF_MPU_RGDAACn_M3PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M3PE), uint32_t) & BM_MPU_RGDAACn_M3PE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M3PE field to a new value. +#define BW_MPU_RGDAACn_M3PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M3PE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M4WE[24] (RW) + * + * Values: + * - 0 - Bus master 4 writes terminate with an access error and the write is not + * performed + * - 1 - Bus master 4 writes allowed + */ +//@{ +#define BP_MPU_RGDAACn_M4WE (24U) //!< Bit position for MPU_RGDAACn_M4WE. +#define BM_MPU_RGDAACn_M4WE (0x01000000U) //!< Bit mask for MPU_RGDAACn_M4WE. +#define BS_MPU_RGDAACn_M4WE (1U) //!< Bit field size in bits for MPU_RGDAACn_M4WE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M4WE field. +#define BR_MPU_RGDAACn_M4WE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M4WE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M4WE. +#define BF_MPU_RGDAACn_M4WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M4WE), uint32_t) & BM_MPU_RGDAACn_M4WE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M4WE field to a new value. +#define BW_MPU_RGDAACn_M4WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M4WE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M4RE[25] (RW) + * + * Values: + * - 0 - Bus master 4 reads terminate with an access error and the read is not + * performed + * - 1 - Bus master 4 reads allowed + */ +//@{ +#define BP_MPU_RGDAACn_M4RE (25U) //!< Bit position for MPU_RGDAACn_M4RE. +#define BM_MPU_RGDAACn_M4RE (0x02000000U) //!< Bit mask for MPU_RGDAACn_M4RE. +#define BS_MPU_RGDAACn_M4RE (1U) //!< Bit field size in bits for MPU_RGDAACn_M4RE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M4RE field. +#define BR_MPU_RGDAACn_M4RE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M4RE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M4RE. +#define BF_MPU_RGDAACn_M4RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M4RE), uint32_t) & BM_MPU_RGDAACn_M4RE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M4RE field to a new value. +#define BW_MPU_RGDAACn_M4RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M4RE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M5WE[26] (RW) + * + * Values: + * - 0 - Bus master 5 writes terminate with an access error and the write is not + * performed + * - 1 - Bus master 5 writes allowed + */ +//@{ +#define BP_MPU_RGDAACn_M5WE (26U) //!< Bit position for MPU_RGDAACn_M5WE. +#define BM_MPU_RGDAACn_M5WE (0x04000000U) //!< Bit mask for MPU_RGDAACn_M5WE. +#define BS_MPU_RGDAACn_M5WE (1U) //!< Bit field size in bits for MPU_RGDAACn_M5WE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M5WE field. +#define BR_MPU_RGDAACn_M5WE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M5WE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M5WE. +#define BF_MPU_RGDAACn_M5WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M5WE), uint32_t) & BM_MPU_RGDAACn_M5WE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M5WE field to a new value. +#define BW_MPU_RGDAACn_M5WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M5WE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M5RE[27] (RW) + * + * Values: + * - 0 - Bus master 5 reads terminate with an access error and the read is not + * performed + * - 1 - Bus master 5 reads allowed + */ +//@{ +#define BP_MPU_RGDAACn_M5RE (27U) //!< Bit position for MPU_RGDAACn_M5RE. +#define BM_MPU_RGDAACn_M5RE (0x08000000U) //!< Bit mask for MPU_RGDAACn_M5RE. +#define BS_MPU_RGDAACn_M5RE (1U) //!< Bit field size in bits for MPU_RGDAACn_M5RE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M5RE field. +#define BR_MPU_RGDAACn_M5RE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M5RE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M5RE. +#define BF_MPU_RGDAACn_M5RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M5RE), uint32_t) & BM_MPU_RGDAACn_M5RE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M5RE field to a new value. +#define BW_MPU_RGDAACn_M5RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M5RE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M6WE[28] (RW) + * + * Values: + * - 0 - Bus master 6 writes terminate with an access error and the write is not + * performed + * - 1 - Bus master 6 writes allowed + */ +//@{ +#define BP_MPU_RGDAACn_M6WE (28U) //!< Bit position for MPU_RGDAACn_M6WE. +#define BM_MPU_RGDAACn_M6WE (0x10000000U) //!< Bit mask for MPU_RGDAACn_M6WE. +#define BS_MPU_RGDAACn_M6WE (1U) //!< Bit field size in bits for MPU_RGDAACn_M6WE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M6WE field. +#define BR_MPU_RGDAACn_M6WE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M6WE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M6WE. +#define BF_MPU_RGDAACn_M6WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M6WE), uint32_t) & BM_MPU_RGDAACn_M6WE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M6WE field to a new value. +#define BW_MPU_RGDAACn_M6WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M6WE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M6RE[29] (RW) + * + * Values: + * - 0 - Bus master 6 reads terminate with an access error and the read is not + * performed + * - 1 - Bus master 6 reads allowed + */ +//@{ +#define BP_MPU_RGDAACn_M6RE (29U) //!< Bit position for MPU_RGDAACn_M6RE. +#define BM_MPU_RGDAACn_M6RE (0x20000000U) //!< Bit mask for MPU_RGDAACn_M6RE. +#define BS_MPU_RGDAACn_M6RE (1U) //!< Bit field size in bits for MPU_RGDAACn_M6RE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M6RE field. +#define BR_MPU_RGDAACn_M6RE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M6RE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M6RE. +#define BF_MPU_RGDAACn_M6RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M6RE), uint32_t) & BM_MPU_RGDAACn_M6RE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M6RE field to a new value. +#define BW_MPU_RGDAACn_M6RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M6RE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M7WE[30] (RW) + * + * Values: + * - 0 - Bus master 7 writes terminate with an access error and the write is not + * performed + * - 1 - Bus master 7 writes allowed + */ +//@{ +#define BP_MPU_RGDAACn_M7WE (30U) //!< Bit position for MPU_RGDAACn_M7WE. +#define BM_MPU_RGDAACn_M7WE (0x40000000U) //!< Bit mask for MPU_RGDAACn_M7WE. +#define BS_MPU_RGDAACn_M7WE (1U) //!< Bit field size in bits for MPU_RGDAACn_M7WE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M7WE field. +#define BR_MPU_RGDAACn_M7WE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M7WE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M7WE. +#define BF_MPU_RGDAACn_M7WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M7WE), uint32_t) & BM_MPU_RGDAACn_M7WE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M7WE field to a new value. +#define BW_MPU_RGDAACn_M7WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M7WE) = (v)) +#endif +//@} + +/*! + * @name Register MPU_RGDAACn, field M7RE[31] (RW) + * + * Values: + * - 0 - Bus master 7 reads terminate with an access error and the read is not + * performed + * - 1 - Bus master 7 reads allowed + */ +//@{ +#define BP_MPU_RGDAACn_M7RE (31U) //!< Bit position for MPU_RGDAACn_M7RE. +#define BM_MPU_RGDAACn_M7RE (0x80000000U) //!< Bit mask for MPU_RGDAACn_M7RE. +#define BS_MPU_RGDAACn_M7RE (1U) //!< Bit field size in bits for MPU_RGDAACn_M7RE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the MPU_RGDAACn_M7RE field. +#define BR_MPU_RGDAACn_M7RE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M7RE)) +#endif + +//! @brief Format value for bitfield MPU_RGDAACn_M7RE. +#define BF_MPU_RGDAACn_M7RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M7RE), uint32_t) & BM_MPU_RGDAACn_M7RE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the M7RE field to a new value. +#define BW_MPU_RGDAACn_M7RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M7RE) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// hw_mpu_t - module struct +//------------------------------------------------------------------------------------------- +/*! + * @brief All MPU module registers. + */ +#ifndef __LANGUAGE_ASM__ +#pragma pack(1) +typedef struct _hw_mpu +{ + __IO hw_mpu_cesr_t CESR; //!< [0x0] Control/Error Status Register + uint8_t _reserved0[12]; + struct { + __I hw_mpu_earn_t EARn; //!< [0x10] Error Address Register, slave port n + __I hw_mpu_edrn_t EDRn; //!< [0x14] Error Detail Register, slave port n + } SP[5]; + uint8_t _reserved1[968]; + struct { + __IO hw_mpu_rgdn_word0_t RGDn_WORD0; //!< [0x400] Region Descriptor n, Word 0 + __IO hw_mpu_rgdn_word1_t RGDn_WORD1; //!< [0x404] Region Descriptor n, Word 1 + __IO hw_mpu_rgdn_word2_t RGDn_WORD2; //!< [0x408] Region Descriptor n, Word 2 + __IO hw_mpu_rgdn_word3_t RGDn_WORD3; //!< [0x40C] Region Descriptor n, Word 3 + } RGD[12]; + uint8_t _reserved2[832]; + __IO hw_mpu_rgdaacn_t RGDAACn[12]; //!< [0x800] Region Descriptor Alternate Access Control n +} hw_mpu_t; +#pragma pack() + +//! @brief Macro to access all MPU registers. +//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, +//! use the '&' operator, like <code>&HW_MPU</code>. +#define HW_MPU (*(hw_mpu_t *) REGS_MPU_BASE) +#endif + +#endif // __HW_MPU_REGISTERS_H__ +// v22/130726/0.9 +// EOF