mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/PeripheralPins.c
- Revision:
- 82:0b31dbcd4769
- Child:
- 86:26fc69fd3b6c
diff -r a9456fdf72fa -r 0b31dbcd4769 targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/PeripheralPins.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/PeripheralPins.c Fri Jan 31 10:00:06 2014 +0000 @@ -0,0 +1,209 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "PeripheralPins.h" + +/************RTC***************/ +const PinMap PinMap_RTC[] = { + {PTC1, RTC_CLKIN, 2}, +}; + +/************ADC***************/ +const PinMap PinMap_ADC[] = { + {PTE20, ADC0_SE0, 0}, + {PTE22, ADC0_SE3, 0}, + {PTE21, ADC0_SE4a, 0}, + {PTE29, ADC0_SE4b, 0}, + {PTE30, ADC0_SE23, 0}, + {PTE23, ADC0_SE7a, 0}, + {PTB0, ADC0_SE8, 0}, + {PTB1, ADC0_SE9, 0}, + {PTB2, ADC0_SE12, 0}, + {PTB3, ADC0_SE13, 0}, + {PTC0, ADC0_SE14, 0}, + {PTC1, ADC0_SE15, 0}, + {PTC2, ADC0_SE11, 0}, + {PTD1, ADC0_SE5b, 0}, + {PTD5, ADC0_SE6b, 0}, + {PTD6, ADC0_SE7b, 0}, + {NC, NC, 0} +}; + +/************DAC***************/ +const PinMap PinMap_DAC[] = { + {PTE30, DAC_0, 0}, + {NC , NC , 0} +}; + +/************I2C***************/ +const PinMap PinMap_I2C_SDA[] = { + {PTE25, I2C_0, 5}, + {PTC9, I2C_0, 2}, + {PTE0, I2C_1, 6}, + {PTB1, I2C_0, 2}, + {PTB3, I2C_0, 2}, + {PTC11, I2C_1, 2}, + {PTC2, I2C_1, 2}, + {PTA4, I2C_1, 2}, + {NC , NC , 0} +}; + +const PinMap PinMap_I2C_SCL[] = { + {PTE24, I2C_0, 5}, + {PTC8, I2C_0, 2}, + {PTE1, I2C_1, 6}, + {PTB0, I2C_0, 2}, + {PTB2, I2C_0, 2}, + {PTC10, I2C_1, 2}, + {PTC1, I2C_1, 2}, + {NC , NC, 0} +}; + +/************UART***************/ +const PinMap PinMap_UART_TX[] = { + {PTA2, UART_0, 2}, + {PTA14, UART_0, 3}, + {PTC4, UART_1, 3}, + {PTD3, UART_2, 3}, + {PTD5, UART_2, 3}, + {PTD7, UART_0, 3}, + {PTE0, UART_1, 3}, + {PTE16, UART_2, 3}, + {PTE20, UART_0, 4}, + {PTE22, UART_2, 4}, + {NC , NC , 0} +}; + +const PinMap PinMap_UART_RX[] = { + {PTA1, UART_0, 2}, + {PTA15, UART_0, 3}, + {PTC3, UART_1, 3}, + {PTD2, UART_2, 3}, + {PTD4, UART_2, 3}, + {PTD6, UART_0, 3}, + {PTE1, UART_1, 3}, + {PTE17, UART_2, 3}, + {PTE21, UART_0, 4}, + {PTE23, UART_2, 4}, + {NC , NC , 0} +}; + +/************SPI***************/ +const PinMap PinMap_SPI_SCLK[] = { + {PTA15, SPI_0, 2}, + {PTB9, SPI_1, 2}, + {PTB11, SPI_1, 2}, + {PTC5, SPI_0, 2}, + {PTD1, SPI_0, 2}, + {PTD5, SPI_1, 2}, + {PTE2, SPI_1, 2}, + {PTE17, SPI_0, 2}, + {NC , NC , 0} +}; + +const PinMap PinMap_SPI_MOSI[] = { + {PTA16, SPI_0, 2}, + {PTA17, SPI_0, 5}, + {PTB16, SPI_1, 2}, + {PTB17, SPI_1, 5}, + {PTC6, SPI_0, 2}, + {PTC7, SPI_0, 5}, + {PTD2, SPI_0, 2}, + {PTD3, SPI_0, 5}, + {PTD6, SPI_1, 2}, + {PTD7, SPI_1, 5}, + {PTE1, SPI_1, 2}, + {PTE3, SPI_1, 5}, + {PTE18, SPI_0, 2}, + {PTE19, SPI_0, 5}, + {NC , NC , 0} +}; + +const PinMap PinMap_SPI_MISO[] = { + {PTA16, SPI_0, 5}, + {PTA17, SPI_0, 2}, + {PTB16, SPI_1, 5}, + {PTB17, SPI_1, 2}, + {PTC6, SPI_0, 5}, + {PTC7, SPI_0, 2}, + {PTD2, SPI_0, 5}, + {PTD3, SPI_0, 2}, + {PTD6, SPI_1, 5}, + {PTD7, SPI_1, 2}, + {PTE1, SPI_1, 5}, + {PTE3, SPI_1, 2}, + {PTE18, SPI_0, 5}, + {PTE19, SPI_0, 2}, + {NC , NC , 0} +}; + +const PinMap PinMap_SPI_SSEL[] = { + {PTA14, SPI_0, 2}, + {PTB10, SPI_1, 2}, + {PTC4, SPI_0, 2}, + {PTD0, SPI_0, 2}, + {PTD4, SPI_1, 2}, + {PTE4, SPI_1, 2}, + {PTE16, SPI_0, 2}, + {NC , NC , 0} +}; + +/************PWM***************/ +const PinMap PinMap_PWM[] = { + // LEDs - only RED pin is PWM capable + {LED_RED, PWM_3, 3}, // PTE29, TPM0 CH2 + + // Arduino digital pinout + {D0, PWM_9 , 3}, // PTA1 , TPM2 CH0 + {D1, PWM_10, 3}, // PTA2 , TPM2 CH1 + {D2, PWM_4 , 4}, // PTD3 , TPM0 CH3 + {D3, PWM_7 , 3}, // PTA12, TPM1 CH0 + {D4, PWM_2 , 3}, // PTA4 , TPM0 CH1 + {D5, PWM_3 , 3}, // PTA5 , TPM0 CH2 + {D6, PWM_5 , 3}, // PTC8 , TPM0 CH4 + {D7, PWM_6 , 3}, // PTC9 , TPM0 CH5 + {D8, PWM_8 , 3}, // PTA13, TPM1 CH1 + {D9, PWM_3 , 4}, // PTD2 , TPM0 CH2 + {D10, PWM_5 , 4}, // PTD4 , TPM0 CH4 + //PWM on D11 not available + //PWM on D12 not available + {D13, PWM_2 , 4}, // PTD5 , TPM0 CH1, + + {PTA0, PWM_6, 3}, + {PTA3, PWM_1, 3}, + {PTA6, PWM_4, 3}, + {PTA7, PWM_5, 3}, + {PTB0, PWM_7, 3}, + {PTB1, PWM_8, 3}, + {PTB2, PWM_9, 3}, + {PTB3, PWM_10, 3}, + {PTC1, PWM_1, 4}, + {PTC2, PWM_2, 4}, + {PTC3, PWM_3, 4}, + {PTC4, PWM_4, 4}, + {PTE20, PWM_7, 3}, + {PTE21, PWM_8, 3}, + {PTE22, PWM_9, 3}, + {PTE23, PWM_10, 3}, + {PTE24, PWM_1, 3}, + {PTE25, PWM_2, 3}, + {PTE26, PWM_6, 3}, + {PTE29, PWM_3, 3}, + {PTE30, PWM_4, 3}, + {PTE31, PWM_5, 3}, + + {NC , NC , 0} +};