shao ziyang / mbed-src-kl05

mbed library sources

Dependents:   frdm_kl05z_gpio_test

Fork of mbed-src by mbed official

targets/cmsis/TARGET_STM/TARGET_STM32F407VG/stm32f4xx_hal_smartcard.h@323:9e901b0a5aa1, 2014-09-13 (annotated)

Committer:
shaoziyang
Date:
Sat Sep 13 14:25:46 2014 +0000
Revision:
323:9e901b0a5aa1
Parent:
296:ec1b66a3d094 
test with CLOCK_SETUP = 0

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mbed_official 133:d4dda5c437f0 1 /**
mbed_official 133:d4dda5c437f0 2 ******************************************************************************
mbed_official 133:d4dda5c437f0 3 * @file stm32f4xx_hal_smartcard.h
mbed_official 133:d4dda5c437f0 4 * @author MCD Application Team
mbed_official 242:7074e42da0b2 5 * @version V1.1.0RC2
mbed_official 242:7074e42da0b2 6 * @date 14-May-2014
mbed_official 133:d4dda5c437f0 7 * @brief Header file of SMARTCARD HAL module.
mbed_official 133:d4dda5c437f0 8 ******************************************************************************
mbed_official 133:d4dda5c437f0 9 * @attention
mbed_official 133:d4dda5c437f0 10 *
mbed_official 133:d4dda5c437f0 11 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
mbed_official 133:d4dda5c437f0 12 *
mbed_official 133:d4dda5c437f0 13 * Redistribution and use in source and binary forms, with or without modification,
mbed_official 133:d4dda5c437f0 14 * are permitted provided that the following conditions are met:
mbed_official 133:d4dda5c437f0 15 * 1. Redistributions of source code must retain the above copyright notice,
mbed_official 133:d4dda5c437f0 16 * this list of conditions and the following disclaimer.
mbed_official 133:d4dda5c437f0 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
mbed_official 133:d4dda5c437f0 18 * this list of conditions and the following disclaimer in the documentation
mbed_official 133:d4dda5c437f0 19 * and/or other materials provided with the distribution.
mbed_official 133:d4dda5c437f0 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
mbed_official 133:d4dda5c437f0 21 * may be used to endorse or promote products derived from this software
mbed_official 133:d4dda5c437f0 22 * without specific prior written permission.
mbed_official 133:d4dda5c437f0 23 *
mbed_official 133:d4dda5c437f0 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
mbed_official 133:d4dda5c437f0 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
mbed_official 133:d4dda5c437f0 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
mbed_official 133:d4dda5c437f0 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
mbed_official 133:d4dda5c437f0 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
mbed_official 133:d4dda5c437f0 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
mbed_official 133:d4dda5c437f0 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
mbed_official 133:d4dda5c437f0 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
mbed_official 133:d4dda5c437f0 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
mbed_official 133:d4dda5c437f0 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
mbed_official 133:d4dda5c437f0 34 *
mbed_official 133:d4dda5c437f0 35 ******************************************************************************
mbed_official 133:d4dda5c437f0 36 */
mbed_official 133:d4dda5c437f0 37
mbed_official 133:d4dda5c437f0 38 /* Define to prevent recursive inclusion -------------------------------------*/
mbed_official 133:d4dda5c437f0 39 #ifndef __STM32F4xx_HAL_SMARTCARD_H
mbed_official 133:d4dda5c437f0 40 #define __STM32F4xx_HAL_SMARTCARD_H
mbed_official 133:d4dda5c437f0 41
mbed_official 133:d4dda5c437f0 42 #ifdef __cplusplus
mbed_official 133:d4dda5c437f0 43 extern "C" {
mbed_official 133:d4dda5c437f0 44 #endif
mbed_official 133:d4dda5c437f0 45
mbed_official 133:d4dda5c437f0 46 /* Includes ------------------------------------------------------------------*/
mbed_official 133:d4dda5c437f0 47 #include "stm32f4xx_hal_def.h"
mbed_official 133:d4dda5c437f0 48
mbed_official 133:d4dda5c437f0 49 /** @addtogroup STM32F4xx_HAL_Driver
mbed_official 133:d4dda5c437f0 50 * @{
mbed_official 133:d4dda5c437f0 51 */
mbed_official 133:d4dda5c437f0 52
mbed_official 133:d4dda5c437f0 53 /** @addtogroup SMARTCARD
mbed_official 133:d4dda5c437f0 54 * @{
mbed_official 133:d4dda5c437f0 55 */
mbed_official 133:d4dda5c437f0 56
mbed_official 133:d4dda5c437f0 57 /* Exported types ------------------------------------------------------------*/
mbed_official 133:d4dda5c437f0 58 /**
mbed_official 133:d4dda5c437f0 59 * @brief SMARTCARD Init Structure definition
mbed_official 133:d4dda5c437f0 60 */
mbed_official 133:d4dda5c437f0 61 typedef struct
mbed_official 133:d4dda5c437f0 62 {
mbed_official 133:d4dda5c437f0 63 uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate.
mbed_official 133:d4dda5c437f0 64 The baud rate is computed using the following formula:
mbed_official 133:d4dda5c437f0 65 - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
mbed_official 133:d4dda5c437f0 66 - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
mbed_official 133:d4dda5c437f0 67
mbed_official 133:d4dda5c437f0 68 uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
mbed_official 133:d4dda5c437f0 69 This parameter can be a value of @ref SMARTCARD_Word_Length */
mbed_official 133:d4dda5c437f0 70
mbed_official 133:d4dda5c437f0 71 uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
mbed_official 133:d4dda5c437f0 72 This parameter can be a value of @ref SMARTCARD_Stop_Bits */
mbed_official 133:d4dda5c437f0 73
mbed_official 133:d4dda5c437f0 74 uint32_t Parity; /*!< Specifies the parity mode.
mbed_official 133:d4dda5c437f0 75 This parameter can be a value of @ref SMARTCARD_Parity
mbed_official 133:d4dda5c437f0 76 @note When parity is enabled, the computed parity is inserted
mbed_official 133:d4dda5c437f0 77 at the MSB position of the transmitted data (9th bit when
mbed_official 133:d4dda5c437f0 78 the word length is set to 9 data bits; 8th bit when the
mbed_official 133:d4dda5c437f0 79 word length is set to 8 data bits).*/
mbed_official 133:d4dda5c437f0 80
mbed_official 133:d4dda5c437f0 81 uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
mbed_official 133:d4dda5c437f0 82 This parameter can be a value of @ref SMARTCARD_Mode */
mbed_official 133:d4dda5c437f0 83
mbed_official 133:d4dda5c437f0 84 uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
mbed_official 133:d4dda5c437f0 85 This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
mbed_official 133:d4dda5c437f0 86
mbed_official 133:d4dda5c437f0 87 uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
mbed_official 133:d4dda5c437f0 88 This parameter can be a value of @ref SMARTCARD_Clock_Phase */
mbed_official 133:d4dda5c437f0 89
mbed_official 133:d4dda5c437f0 90 uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
mbed_official 133:d4dda5c437f0 91 data bit (MSB) has to be output on the SCLK pin in synchronous mode.
mbed_official 133:d4dda5c437f0 92 This parameter can be a value of @ref SMARTCARD_Last_Bit */
mbed_official 133:d4dda5c437f0 93
mbed_official 242:7074e42da0b2 94 uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler.
mbed_official 133:d4dda5c437f0 95 This parameter must be a number between Min_Data = 0 and Max_Data = 255 */
mbed_official 133:d4dda5c437f0 96
mbed_official 242:7074e42da0b2 97 uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time.
mbed_official 133:d4dda5c437f0 98 This parameter must be a number between Min_Data = 0 and Max_Data = 255 */
mbed_official 133:d4dda5c437f0 99
mbed_official 242:7074e42da0b2 100 uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state.
mbed_official 133:d4dda5c437f0 101 This parameter can be a value of @ref SmartCard_NACK_State */
mbed_official 133:d4dda5c437f0 102 }SMARTCARD_InitTypeDef;
mbed_official 133:d4dda5c437f0 103
mbed_official 133:d4dda5c437f0 104 /**
mbed_official 133:d4dda5c437f0 105 * @brief HAL State structures definition
mbed_official 133:d4dda5c437f0 106 */
mbed_official 133:d4dda5c437f0 107 typedef enum
mbed_official 133:d4dda5c437f0 108 {
mbed_official 242:7074e42da0b2 109 HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
mbed_official 242:7074e42da0b2 110 HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
mbed_official 242:7074e42da0b2 111 HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
mbed_official 242:7074e42da0b2 112 HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
mbed_official 242:7074e42da0b2 113 HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
mbed_official 242:7074e42da0b2 114 HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
mbed_official 242:7074e42da0b2 115 HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
mbed_official 242:7074e42da0b2 116 HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
mbed_official 133:d4dda5c437f0 117 }HAL_SMARTCARD_StateTypeDef;
mbed_official 133:d4dda5c437f0 118
mbed_official 133:d4dda5c437f0 119 /**
mbed_official 133:d4dda5c437f0 120 * @brief HAL SMARTCARD Error Code structure definition
mbed_official 133:d4dda5c437f0 121 */
mbed_official 133:d4dda5c437f0 122 typedef enum
mbed_official 133:d4dda5c437f0 123 {
mbed_official 133:d4dda5c437f0 124 HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
mbed_official 133:d4dda5c437f0 125 HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
mbed_official 133:d4dda5c437f0 126 HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
mbed_official 133:d4dda5c437f0 127 HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
mbed_official 133:d4dda5c437f0 128 HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
mbed_official 133:d4dda5c437f0 129 HAL_SMARTCARD_ERROR_DMA = 0x10 /*!< DMA transfer error */
mbed_official 133:d4dda5c437f0 130 }HAL_SMARTCARD_ErrorTypeDef;
mbed_official 133:d4dda5c437f0 131
mbed_official 133:d4dda5c437f0 132 /**
mbed_official 133:d4dda5c437f0 133 * @brief SMARTCARD handle Structure definition
mbed_official 133:d4dda5c437f0 134 */
mbed_official 133:d4dda5c437f0 135 typedef struct
mbed_official 133:d4dda5c437f0 136 {
mbed_official 133:d4dda5c437f0 137 USART_TypeDef *Instance; /* USART registers base address */
mbed_official 133:d4dda5c437f0 138
mbed_official 133:d4dda5c437f0 139 SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
mbed_official 133:d4dda5c437f0 140
mbed_official 133:d4dda5c437f0 141 uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
mbed_official 133:d4dda5c437f0 142
mbed_official 133:d4dda5c437f0 143 uint16_t TxXferSize; /* SmartCard Tx Transfer size */
mbed_official 133:d4dda5c437f0 144
mbed_official 133:d4dda5c437f0 145 uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
mbed_official 133:d4dda5c437f0 146
mbed_official 133:d4dda5c437f0 147 uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
mbed_official 133:d4dda5c437f0 148
mbed_official 133:d4dda5c437f0 149 uint16_t RxXferSize; /* SmartCard Rx Transfer size */
mbed_official 133:d4dda5c437f0 150
mbed_official 133:d4dda5c437f0 151 uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
mbed_official 133:d4dda5c437f0 152
mbed_official 133:d4dda5c437f0 153 DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
mbed_official 133:d4dda5c437f0 154
mbed_official 133:d4dda5c437f0 155 DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
mbed_official 133:d4dda5c437f0 156
mbed_official 133:d4dda5c437f0 157 HAL_LockTypeDef Lock; /* Locking object */
mbed_official 133:d4dda5c437f0 158
mbed_official 133:d4dda5c437f0 159 __IO HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
mbed_official 133:d4dda5c437f0 160
mbed_official 133:d4dda5c437f0 161 __IO HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SMARTCARD Error code */
mbed_official 133:d4dda5c437f0 162 }SMARTCARD_HandleTypeDef;
mbed_official 133:d4dda5c437f0 163
mbed_official 133:d4dda5c437f0 164 /* Exported constants --------------------------------------------------------*/
mbed_official 133:d4dda5c437f0 165 /** @defgroup SMARTCARD_Exported_Constants
mbed_official 133:d4dda5c437f0 166 * @{
mbed_official 133:d4dda5c437f0 167 */
mbed_official 133:d4dda5c437f0 168
mbed_official 133:d4dda5c437f0 169 /** @defgroup SMARTCARD_Word_Length
mbed_official 133:d4dda5c437f0 170 * @{
mbed_official 133:d4dda5c437f0 171 */
mbed_official 133:d4dda5c437f0 172 #define SMARTCARD_WORDLENGTH_8B ((uint32_t)0x00000000)
mbed_official 133:d4dda5c437f0 173 #define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
mbed_official 133:d4dda5c437f0 174 #define IS_SMARTCARD_WORD_LENGTH(LENGTH) (((LENGTH) == SMARTCARD_WORDLENGTH_8B) || \
mbed_official 133:d4dda5c437f0 175 ((LENGTH) == SMARTCARD_WORDLENGTH_9B))
mbed_official 133:d4dda5c437f0 176 /**
mbed_official 133:d4dda5c437f0 177 * @}
mbed_official 133:d4dda5c437f0 178 */
mbed_official 133:d4dda5c437f0 179
mbed_official 133:d4dda5c437f0 180 /** @defgroup SMARTCARD_Stop_Bits
mbed_official 133:d4dda5c437f0 181 * @{
mbed_official 133:d4dda5c437f0 182 */
mbed_official 133:d4dda5c437f0 183 #define SMARTCARD_STOPBITS_1 ((uint32_t)0x00000000)
mbed_official 133:d4dda5c437f0 184 #define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
mbed_official 133:d4dda5c437f0 185 #define SMARTCARD_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
mbed_official 133:d4dda5c437f0 186 #define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
mbed_official 133:d4dda5c437f0 187 #define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_1) || \
mbed_official 133:d4dda5c437f0 188 ((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \
mbed_official 133:d4dda5c437f0 189 ((STOPBITS) == SMARTCARD_STOPBITS_1_5) || \
mbed_official 133:d4dda5c437f0 190 ((STOPBITS) == SMARTCARD_STOPBITS_2))
mbed_official 133:d4dda5c437f0 191 /**
mbed_official 133:d4dda5c437f0 192 * @}
mbed_official 133:d4dda5c437f0 193 */
mbed_official 133:d4dda5c437f0 194
mbed_official 133:d4dda5c437f0 195 /** @defgroup SMARTCARD_Parity
mbed_official 133:d4dda5c437f0 196 * @{
mbed_official 133:d4dda5c437f0 197 */
mbed_official 133:d4dda5c437f0 198 #define SMARTCARD_PARITY_NONE ((uint32_t)0x00000000)
mbed_official 133:d4dda5c437f0 199 #define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
mbed_official 133:d4dda5c437f0 200 #define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
mbed_official 133:d4dda5c437f0 201 #define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_NONE) || \
mbed_official 133:d4dda5c437f0 202 ((PARITY) == SMARTCARD_PARITY_EVEN) || \
mbed_official 133:d4dda5c437f0 203 ((PARITY) == SMARTCARD_PARITY_ODD))
mbed_official 133:d4dda5c437f0 204 /**
mbed_official 133:d4dda5c437f0 205 * @}
mbed_official 133:d4dda5c437f0 206 */
mbed_official 133:d4dda5c437f0 207
mbed_official 133:d4dda5c437f0 208 /** @defgroup SMARTCARD_Mode
mbed_official 133:d4dda5c437f0 209 * @{
mbed_official 133:d4dda5c437f0 210 */
mbed_official 133:d4dda5c437f0 211 #define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE)
mbed_official 133:d4dda5c437f0 212 #define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE)
mbed_official 133:d4dda5c437f0 213 #define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
mbed_official 133:d4dda5c437f0 214 #define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
mbed_official 133:d4dda5c437f0 215 /**
mbed_official 133:d4dda5c437f0 216 * @}
mbed_official 133:d4dda5c437f0 217 */
mbed_official 133:d4dda5c437f0 218
mbed_official 133:d4dda5c437f0 219 /** @defgroup SMARTCARD_Clock_Polarity
mbed_official 133:d4dda5c437f0 220 * @{
mbed_official 133:d4dda5c437f0 221 */
mbed_official 133:d4dda5c437f0 222 #define SMARTCARD_POLARITY_LOW ((uint32_t)0x00000000)
mbed_official 133:d4dda5c437f0 223 #define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
mbed_official 133:d4dda5c437f0 224 #define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
mbed_official 133:d4dda5c437f0 225 /**
mbed_official 133:d4dda5c437f0 226 * @}
mbed_official 133:d4dda5c437f0 227 */
mbed_official 133:d4dda5c437f0 228
mbed_official 133:d4dda5c437f0 229 /** @defgroup SMARTCARD_Clock_Phase
mbed_official 133:d4dda5c437f0 230 * @{
mbed_official 133:d4dda5c437f0 231 */
mbed_official 133:d4dda5c437f0 232 #define SMARTCARD_PHASE_1EDGE ((uint32_t)0x00000000)
mbed_official 133:d4dda5c437f0 233 #define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
mbed_official 133:d4dda5c437f0 234 #define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
mbed_official 133:d4dda5c437f0 235 /**
mbed_official 133:d4dda5c437f0 236 * @}
mbed_official 133:d4dda5c437f0 237 */
mbed_official 133:d4dda5c437f0 238
mbed_official 133:d4dda5c437f0 239 /** @defgroup SMARTCARD_Last_Bit
mbed_official 133:d4dda5c437f0 240 * @{
mbed_official 133:d4dda5c437f0 241 */
mbed_official 133:d4dda5c437f0 242 #define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x00000000)
mbed_official 133:d4dda5c437f0 243 #define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
mbed_official 133:d4dda5c437f0 244 #define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \
mbed_official 133:d4dda5c437f0 245 ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))
mbed_official 133:d4dda5c437f0 246 /**
mbed_official 133:d4dda5c437f0 247 * @}
mbed_official 133:d4dda5c437f0 248 */
mbed_official 133:d4dda5c437f0 249
mbed_official 133:d4dda5c437f0 250 /** @defgroup SmartCard_NACK_State
mbed_official 133:d4dda5c437f0 251 * @{
mbed_official 133:d4dda5c437f0 252 */
mbed_official 133:d4dda5c437f0 253 #define SMARTCARD_NACK_ENABLED ((uint32_t)USART_CR3_NACK)
mbed_official 133:d4dda5c437f0 254 #define SMARTCARD_NACK_DISABLED ((uint32_t)0x00000000)
mbed_official 133:d4dda5c437f0 255 #define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
mbed_official 133:d4dda5c437f0 256 ((NACK) == SMARTCARD_NACK_DISABLED))
mbed_official 133:d4dda5c437f0 257 /**
mbed_official 133:d4dda5c437f0 258 * @}
mbed_official 133:d4dda5c437f0 259 */
mbed_official 133:d4dda5c437f0 260
mbed_official 133:d4dda5c437f0 261 /** @defgroup SmartCard_DMA_Requests
mbed_official 133:d4dda5c437f0 262 * @{
mbed_official 133:d4dda5c437f0 263 */
mbed_official 133:d4dda5c437f0 264
mbed_official 133:d4dda5c437f0 265 #define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT)
mbed_official 133:d4dda5c437f0 266 #define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR)
mbed_official 133:d4dda5c437f0 267
mbed_official 133:d4dda5c437f0 268 /**
mbed_official 133:d4dda5c437f0 269 * @}
mbed_official 133:d4dda5c437f0 270 */
mbed_official 133:d4dda5c437f0 271
mbed_official 133:d4dda5c437f0 272 /** @defgroup SmartCard_Flags
mbed_official 133:d4dda5c437f0 273 * Elements values convention: 0xXXXX
mbed_official 133:d4dda5c437f0 274 * - 0xXXXX : Flag mask in the SR register
mbed_official 133:d4dda5c437f0 275 * @{
mbed_official 133:d4dda5c437f0 276 */
mbed_official 133:d4dda5c437f0 277
mbed_official 133:d4dda5c437f0 278 #define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
mbed_official 133:d4dda5c437f0 279 #define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
mbed_official 133:d4dda5c437f0 280 #define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
mbed_official 133:d4dda5c437f0 281 #define SMARTCARD_FLAG_IDLE ((uint32_t)0x00000010)
mbed_official 133:d4dda5c437f0 282 #define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
mbed_official 133:d4dda5c437f0 283 #define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
mbed_official 133:d4dda5c437f0 284 #define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
mbed_official 133:d4dda5c437f0 285 #define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
mbed_official 133:d4dda5c437f0 286 /**
mbed_official 133:d4dda5c437f0 287 * @}
mbed_official 133:d4dda5c437f0 288 */
mbed_official 133:d4dda5c437f0 289
mbed_official 133:d4dda5c437f0 290 /** @defgroup SmartCard_Interrupt_definition
mbed_official 133:d4dda5c437f0 291 * Elements values convention: 0xY000XXXX
mbed_official 133:d4dda5c437f0 292 * - XXXX : Interrupt mask in the XX register
mbed_official 133:d4dda5c437f0 293 * - Y : Interrupt source register (2bits)
mbed_official 133:d4dda5c437f0 294 * - 01: CR1 register
mbed_official 133:d4dda5c437f0 295 * - 10: CR3 register
mbed_official 133:d4dda5c437f0 296
mbed_official 133:d4dda5c437f0 297 *
mbed_official 133:d4dda5c437f0 298 * @{
mbed_official 133:d4dda5c437f0 299 */
mbed_official 133:d4dda5c437f0 300 #define SMARTCARD_IT_PE ((uint32_t)0x10000100)
mbed_official 133:d4dda5c437f0 301 #define SMARTCARD_IT_TXE ((uint32_t)0x10000080)
mbed_official 133:d4dda5c437f0 302 #define SMARTCARD_IT_TC ((uint32_t)0x10000040)
mbed_official 133:d4dda5c437f0 303 #define SMARTCARD_IT_RXNE ((uint32_t)0x10000020)
mbed_official 133:d4dda5c437f0 304 #define SMARTCARD_IT_IDLE ((uint32_t)0x10000010)
mbed_official 133:d4dda5c437f0 305 #define SMARTCARD_IT_ERR ((uint32_t)0x20000001)
mbed_official 133:d4dda5c437f0 306
mbed_official 133:d4dda5c437f0 307 /**
mbed_official 133:d4dda5c437f0 308 * @}
mbed_official 133:d4dda5c437f0 309 */
mbed_official 133:d4dda5c437f0 310
mbed_official 133:d4dda5c437f0 311 /**
mbed_official 133:d4dda5c437f0 312 * @}
mbed_official 133:d4dda5c437f0 313 */
mbed_official 133:d4dda5c437f0 314
mbed_official 133:d4dda5c437f0 315 /* Exported macro ------------------------------------------------------------*/
mbed_official 133:d4dda5c437f0 316
mbed_official 242:7074e42da0b2 317 /** @brief Reset SMARTCARD handle state
mbed_official 242:7074e42da0b2 318 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 242:7074e42da0b2 319 * @retval None
mbed_official 242:7074e42da0b2 320 */
mbed_official 242:7074e42da0b2 321 #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
mbed_official 242:7074e42da0b2 322
mbed_official 133:d4dda5c437f0 323 /** @brief Flushs the Smartcard DR register
mbed_official 133:d4dda5c437f0 324 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 133:d4dda5c437f0 325 */
mbed_official 133:d4dda5c437f0 326 #define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
mbed_official 133:d4dda5c437f0 327
mbed_official 133:d4dda5c437f0 328 /** @brief Checks whether the specified Smartcard flag is set or not.
mbed_official 133:d4dda5c437f0 329 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 133:d4dda5c437f0 330 * @param __FLAG__: specifies the flag to check.
mbed_official 133:d4dda5c437f0 331 * This parameter can be one of the following values:
mbed_official 133:d4dda5c437f0 332 * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
mbed_official 133:d4dda5c437f0 333 * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
mbed_official 133:d4dda5c437f0 334 * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
mbed_official 133:d4dda5c437f0 335 * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag
mbed_official 133:d4dda5c437f0 336 * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
mbed_official 133:d4dda5c437f0 337 * @arg SMARTCARD_FLAG_NE: Noise Error flag
mbed_official 133:d4dda5c437f0 338 * @arg SMARTCARD_FLAG_FE: Framing Error flag
mbed_official 133:d4dda5c437f0 339 * @arg SMARTCARD_FLAG_PE: Parity Error flag
mbed_official 133:d4dda5c437f0 340 * @retval The new state of __FLAG__ (TRUE or FALSE).
mbed_official 133:d4dda5c437f0 341 */
mbed_official 133:d4dda5c437f0 342 #define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
mbed_official 133:d4dda5c437f0 343
mbed_official 133:d4dda5c437f0 344 /** @brief Clears the specified Smartcard pending flags.
mbed_official 133:d4dda5c437f0 345 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 133:d4dda5c437f0 346 * @param __FLAG__: specifies the flag to check.
mbed_official 133:d4dda5c437f0 347 * This parameter can be any combination of the following values:
mbed_official 133:d4dda5c437f0 348 * @arg SMARTCARD_FLAG_TC: Transmission Complete flag.
mbed_official 133:d4dda5c437f0 349 * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
mbed_official 133:d4dda5c437f0 350 *
mbed_official 133:d4dda5c437f0 351 * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (OverRun
mbed_official 133:d4dda5c437f0 352 * error) flags are cleared by software sequence: a read operation to
mbed_official 133:d4dda5c437f0 353 * USART_SR register followed by a read operation to USART_DR register.
mbed_official 133:d4dda5c437f0 354 * @note RXNE flag can be also cleared by a read to the USART_DR register.
mbed_official 133:d4dda5c437f0 355 * @note TC flag can be also cleared by software sequence: a read operation to
mbed_official 133:d4dda5c437f0 356 * USART_SR register followed by a write operation to USART_DR register.
mbed_official 133:d4dda5c437f0 357 * @note TXE flag is cleared only by a write to the USART_DR register.
mbed_official 133:d4dda5c437f0 358 */
mbed_official 133:d4dda5c437f0 359 #define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR &= ~(__FLAG__))
mbed_official 133:d4dda5c437f0 360
mbed_official 133:d4dda5c437f0 361 /** @brief Enables or disables the specified SmartCard interrupts.
mbed_official 133:d4dda5c437f0 362 * @param __HANDLE__: specifies the SMARTCARD Handle.
mbed_official 133:d4dda5c437f0 363 * @param __INTERRUPT__: specifies the SMARTCARD interrupt source to check.
mbed_official 133:d4dda5c437f0 364 * This parameter can be one of the following values:
mbed_official 133:d4dda5c437f0 365 * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
mbed_official 133:d4dda5c437f0 366 * @arg SMARTCARD_IT_TC: Transmission complete interrupt
mbed_official 133:d4dda5c437f0 367 * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
mbed_official 133:d4dda5c437f0 368 * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
mbed_official 133:d4dda5c437f0 369 * @arg SMARTCARD_IT_PE: Parity Error interrupt
mbed_official 133:d4dda5c437f0 370 * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
mbed_official 133:d4dda5c437f0 371 */
mbed_official 133:d4dda5c437f0 372 #define SMARTCARD_IT_MASK ((uint32_t)0x0000FFFF)
mbed_official 133:d4dda5c437f0 373 #define __SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
mbed_official 133:d4dda5c437f0 374 ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
mbed_official 133:d4dda5c437f0 375 #define __SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
mbed_official 133:d4dda5c437f0 376 ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
mbed_official 133:d4dda5c437f0 377
mbed_official 133:d4dda5c437f0 378 /** @brief Checks whether the specified SmartCard interrupt has occurred or not.
mbed_official 133:d4dda5c437f0 379 * @param __HANDLE__: specifies the SmartCard Handle.
mbed_official 133:d4dda5c437f0 380 * @param __IT__: specifies the SMARTCARD interrupt source to check.
mbed_official 133:d4dda5c437f0 381 * This parameter can be one of the following values:
mbed_official 133:d4dda5c437f0 382 * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
mbed_official 133:d4dda5c437f0 383 * @arg SMARTCARD_IT_TC: Transmission complete interrupt
mbed_official 133:d4dda5c437f0 384 * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
mbed_official 133:d4dda5c437f0 385 * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
mbed_official 133:d4dda5c437f0 386 * @arg SMARTCARD_IT_ERR: Error interrupt
mbed_official 133:d4dda5c437f0 387 * @arg SMARTCARD_IT_PE: Parity Error interrupt
mbed_official 133:d4dda5c437f0 388 * @retval The new state of __IT__ (TRUE or FALSE).
mbed_official 133:d4dda5c437f0 389 */
mbed_official 133:d4dda5c437f0 390 #define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))
mbed_official 133:d4dda5c437f0 391
mbed_official 133:d4dda5c437f0 392 /** @brief Macros to enable or disable the SmartCard interface.
mbed_official 133:d4dda5c437f0 393 * @param __HANDLE__: specifies the SmartCard Handle.
mbed_official 133:d4dda5c437f0 394 */
mbed_official 133:d4dda5c437f0 395 #define __SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
mbed_official 133:d4dda5c437f0 396 #define __SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
mbed_official 133:d4dda5c437f0 397
mbed_official 133:d4dda5c437f0 398 /** @brief Macros to enable or disable the SmartCard DMA request.
mbed_official 133:d4dda5c437f0 399 * @param __HANDLE__: specifies the SmartCard Handle.
mbed_official 133:d4dda5c437f0 400 * @param __REQUEST__: specifies the SmartCard DMA request.
mbed_official 133:d4dda5c437f0 401 * This parameter can be one of the following values:
mbed_official 133:d4dda5c437f0 402 * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
mbed_official 133:d4dda5c437f0 403 * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
mbed_official 133:d4dda5c437f0 404 */
mbed_official 133:d4dda5c437f0 405 #define __SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__))
mbed_official 133:d4dda5c437f0 406 #define __SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__))
mbed_official 133:d4dda5c437f0 407
mbed_official 133:d4dda5c437f0 408 #define __DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
mbed_official 133:d4dda5c437f0 409 #define __DIVMANT(_PCLK_, _BAUD_) (__DIV((_PCLK_), (_BAUD_))/100)
mbed_official 133:d4dda5c437f0 410 #define __DIVFRAQ(_PCLK_, _BAUD_) (((__DIV((_PCLK_), (_BAUD_)) - (__DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
mbed_official 133:d4dda5c437f0 411 #define __SMARTCARD_BRR(_PCLK_, _BAUD_) ((__DIVMANT((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
mbed_official 133:d4dda5c437f0 412
mbed_official 133:d4dda5c437f0 413 #define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
mbed_official 133:d4dda5c437f0 414
mbed_official 133:d4dda5c437f0 415 /* Exported functions --------------------------------------------------------*/
mbed_official 133:d4dda5c437f0 416 /* Initialization/de-initialization functions **********************************/
mbed_official 133:d4dda5c437f0 417 HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 418 HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 419 HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 420 void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 421 void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 422 /* IO operation functions *******************************************************/
mbed_official 133:d4dda5c437f0 423 HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
mbed_official 133:d4dda5c437f0 424 HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
mbed_official 133:d4dda5c437f0 425 HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
mbed_official 133:d4dda5c437f0 426 HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
mbed_official 133:d4dda5c437f0 427 HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
mbed_official 133:d4dda5c437f0 428 HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
mbed_official 133:d4dda5c437f0 429 void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 430 void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 431 void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 432 void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 433
mbed_official 133:d4dda5c437f0 434 /* Peripheral State functions **************************************************/
mbed_official 133:d4dda5c437f0 435 HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 436 uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
mbed_official 133:d4dda5c437f0 437
mbed_official 133:d4dda5c437f0 438 /**
mbed_official 133:d4dda5c437f0 439 * @}
mbed_official 133:d4dda5c437f0 440 */
mbed_official 133:d4dda5c437f0 441
mbed_official 133:d4dda5c437f0 442 /**
mbed_official 133:d4dda5c437f0 443 * @}
mbed_official 133:d4dda5c437f0 444 */
mbed_official 133:d4dda5c437f0 445
mbed_official 133:d4dda5c437f0 446 #ifdef __cplusplus
mbed_official 133:d4dda5c437f0 447 }
mbed_official 133:d4dda5c437f0 448 #endif
mbed_official 133:d4dda5c437f0 449
mbed_official 133:d4dda5c437f0 450 #endif /* __STM32F4xx_HAL_SMARTCARD_H */
mbed_official 133:d4dda5c437f0 451
mbed_official 133:d4dda5c437f0 452 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/