shao ziyang / mbed-src-kl05

mbed library sources

Dependents:   frdm_kl05z_gpio_test

Fork of mbed-src by mbed official

targets/cmsis/TARGET_STM/TARGET_NUCLEO_L053R8/stm32l0xx_hal_uart.h@323:9e901b0a5aa1, 2014-09-13 (annotated)

Committer:
shaoziyang
Date:
Sat Sep 13 14:25:46 2014 +0000
Revision:
323:9e901b0a5aa1
Parent:
181:a4cbdfbbd2f4 
test with CLOCK_SETUP = 0

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mbed_official 181:a4cbdfbbd2f4 1 /**
mbed_official 181:a4cbdfbbd2f4 2 ******************************************************************************
mbed_official 181:a4cbdfbbd2f4 3 * @file stm32l0xx_hal_uart.h
mbed_official 181:a4cbdfbbd2f4 4 * @author MCD Application Team
mbed_official 181:a4cbdfbbd2f4 5 * @version V1.0.0
mbed_official 181:a4cbdfbbd2f4 6 * @date 22-April-2014
mbed_official 181:a4cbdfbbd2f4 7 * @brief Header file of UART HAL module.
mbed_official 181:a4cbdfbbd2f4 8 ******************************************************************************
mbed_official 181:a4cbdfbbd2f4 9 * @attention
mbed_official 181:a4cbdfbbd2f4 10 *
mbed_official 181:a4cbdfbbd2f4 11 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
mbed_official 181:a4cbdfbbd2f4 12 *
mbed_official 181:a4cbdfbbd2f4 13 * Redistribution and use in source and binary forms, with or without modification,
mbed_official 181:a4cbdfbbd2f4 14 * are permitted provided that the following conditions are met:
mbed_official 181:a4cbdfbbd2f4 15 * 1. Redistributions of source code must retain the above copyright notice,
mbed_official 181:a4cbdfbbd2f4 16 * this list of conditions and the following disclaimer.
mbed_official 181:a4cbdfbbd2f4 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
mbed_official 181:a4cbdfbbd2f4 18 * this list of conditions and the following disclaimer in the documentation
mbed_official 181:a4cbdfbbd2f4 19 * and/or other materials provided with the distribution.
mbed_official 181:a4cbdfbbd2f4 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
mbed_official 181:a4cbdfbbd2f4 21 * may be used to endorse or promote products derived from this software
mbed_official 181:a4cbdfbbd2f4 22 * without specific prior written permission.
mbed_official 181:a4cbdfbbd2f4 23 *
mbed_official 181:a4cbdfbbd2f4 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
mbed_official 181:a4cbdfbbd2f4 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
mbed_official 181:a4cbdfbbd2f4 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
mbed_official 181:a4cbdfbbd2f4 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
mbed_official 181:a4cbdfbbd2f4 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
mbed_official 181:a4cbdfbbd2f4 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
mbed_official 181:a4cbdfbbd2f4 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
mbed_official 181:a4cbdfbbd2f4 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
mbed_official 181:a4cbdfbbd2f4 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
mbed_official 181:a4cbdfbbd2f4 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
mbed_official 181:a4cbdfbbd2f4 34 *
mbed_official 181:a4cbdfbbd2f4 35 ******************************************************************************
mbed_official 181:a4cbdfbbd2f4 36 */
mbed_official 181:a4cbdfbbd2f4 37
mbed_official 181:a4cbdfbbd2f4 38 /* Define to prevent recursive inclusion -------------------------------------*/
mbed_official 181:a4cbdfbbd2f4 39 #ifndef __STM32L0xx_HAL_UART_H
mbed_official 181:a4cbdfbbd2f4 40 #define __STM32L0xx_HAL_UART_H
mbed_official 181:a4cbdfbbd2f4 41
mbed_official 181:a4cbdfbbd2f4 42 #ifdef __cplusplus
mbed_official 181:a4cbdfbbd2f4 43 extern "C" {
mbed_official 181:a4cbdfbbd2f4 44 #endif
mbed_official 181:a4cbdfbbd2f4 45
mbed_official 181:a4cbdfbbd2f4 46 /* Includes ------------------------------------------------------------------*/
mbed_official 181:a4cbdfbbd2f4 47 #include "stm32l0xx_hal_def.h"
mbed_official 181:a4cbdfbbd2f4 48
mbed_official 181:a4cbdfbbd2f4 49 /** @addtogroup STM32L0xx_HAL_Driver
mbed_official 181:a4cbdfbbd2f4 50 * @{
mbed_official 181:a4cbdfbbd2f4 51 */
mbed_official 181:a4cbdfbbd2f4 52
mbed_official 181:a4cbdfbbd2f4 53 /** @addtogroup UART
mbed_official 181:a4cbdfbbd2f4 54 * @{
mbed_official 181:a4cbdfbbd2f4 55 */
mbed_official 181:a4cbdfbbd2f4 56
mbed_official 181:a4cbdfbbd2f4 57 /* Exported types ------------------------------------------------------------*/
mbed_official 181:a4cbdfbbd2f4 58
mbed_official 181:a4cbdfbbd2f4 59 /**
mbed_official 181:a4cbdfbbd2f4 60 * @brief UART Init Structure definition
mbed_official 181:a4cbdfbbd2f4 61 */
mbed_official 181:a4cbdfbbd2f4 62 typedef struct
mbed_official 181:a4cbdfbbd2f4 63 {
mbed_official 181:a4cbdfbbd2f4 64 uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
mbed_official 181:a4cbdfbbd2f4 65 The baud rate register is computed using the following formula:
mbed_official 181:a4cbdfbbd2f4 66 - If oversampling is 16 or in LIN mode,
mbed_official 181:a4cbdfbbd2f4 67 Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
mbed_official 181:a4cbdfbbd2f4 68 - If oversampling is 8,
mbed_official 181:a4cbdfbbd2f4 69 Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
mbed_official 181:a4cbdfbbd2f4 70 Baud Rate Register[3] = 0
mbed_official 181:a4cbdfbbd2f4 71 Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
mbed_official 181:a4cbdfbbd2f4 72
mbed_official 181:a4cbdfbbd2f4 73 uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
mbed_official 181:a4cbdfbbd2f4 74 This parameter can be a value of @ref UART_Word_Length */
mbed_official 181:a4cbdfbbd2f4 75
mbed_official 181:a4cbdfbbd2f4 76 uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
mbed_official 181:a4cbdfbbd2f4 77 This parameter can be a value of @ref UART_Stop_Bits */
mbed_official 181:a4cbdfbbd2f4 78
mbed_official 181:a4cbdfbbd2f4 79 uint32_t Parity; /*!< Specifies the parity mode.
mbed_official 181:a4cbdfbbd2f4 80 This parameter can be a value of @ref UART_Parity
mbed_official 181:a4cbdfbbd2f4 81 @note When parity is enabled, the computed parity is inserted
mbed_official 181:a4cbdfbbd2f4 82 at the MSB position of the transmitted data (9th bit when
mbed_official 181:a4cbdfbbd2f4 83 the word length is set to 9 data bits; 8th bit when the
mbed_official 181:a4cbdfbbd2f4 84 word length is set to 8 data bits). */
mbed_official 181:a4cbdfbbd2f4 85
mbed_official 181:a4cbdfbbd2f4 86 uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
mbed_official 181:a4cbdfbbd2f4 87 This parameter can be a value of @ref UART_Mode */
mbed_official 181:a4cbdfbbd2f4 88
mbed_official 181:a4cbdfbbd2f4 89 uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled
mbed_official 181:a4cbdfbbd2f4 90 or disabled.
mbed_official 181:a4cbdfbbd2f4 91 This parameter can be a value of @ref UART_Hardware_Flow_Control */
mbed_official 181:a4cbdfbbd2f4 92
mbed_official 181:a4cbdfbbd2f4 93 uint32_t OverSampling; /*!< Specifies wether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
mbed_official 181:a4cbdfbbd2f4 94 This parameter can be a value of @ref UART_Over_Sampling */
mbed_official 181:a4cbdfbbd2f4 95
mbed_official 181:a4cbdfbbd2f4 96 uint32_t OneBitSampling; /*!< Specifies wether a single sample or three samples' majority vote is selected.
mbed_official 181:a4cbdfbbd2f4 97 Selecting the single sample method increases the receiver tolerance to clock
mbed_official 181:a4cbdfbbd2f4 98 deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
mbed_official 181:a4cbdfbbd2f4 99 }UART_InitTypeDef;
mbed_official 181:a4cbdfbbd2f4 100
mbed_official 181:a4cbdfbbd2f4 101 /**
mbed_official 181:a4cbdfbbd2f4 102 * @brief UART Advanced Features initalization structure definition
mbed_official 181:a4cbdfbbd2f4 103 */
mbed_official 181:a4cbdfbbd2f4 104 typedef struct
mbed_official 181:a4cbdfbbd2f4 105 {
mbed_official 181:a4cbdfbbd2f4 106 uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
mbed_official 181:a4cbdfbbd2f4 107 Advanced Features may be initialized at the same time .
mbed_official 181:a4cbdfbbd2f4 108 This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
mbed_official 181:a4cbdfbbd2f4 109
mbed_official 181:a4cbdfbbd2f4 110 uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
mbed_official 181:a4cbdfbbd2f4 111 This parameter can be a value of @ref UART_Tx_Inv */
mbed_official 181:a4cbdfbbd2f4 112
mbed_official 181:a4cbdfbbd2f4 113 uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
mbed_official 181:a4cbdfbbd2f4 114 This parameter can be a value of @ref UART_Rx_Inv */
mbed_official 181:a4cbdfbbd2f4 115
mbed_official 181:a4cbdfbbd2f4 116 uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
mbed_official 181:a4cbdfbbd2f4 117 vs negative/inverted logic).
mbed_official 181:a4cbdfbbd2f4 118 This parameter can be a value of @ref UART_Data_Inv */
mbed_official 181:a4cbdfbbd2f4 119
mbed_official 181:a4cbdfbbd2f4 120 uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
mbed_official 181:a4cbdfbbd2f4 121 This parameter can be a value of @ref UART_Rx_Tx_Swap */
mbed_official 181:a4cbdfbbd2f4 122
mbed_official 181:a4cbdfbbd2f4 123 uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
mbed_official 181:a4cbdfbbd2f4 124 This parameter can be a value of @ref UART_Overrun_Disable */
mbed_official 181:a4cbdfbbd2f4 125
mbed_official 181:a4cbdfbbd2f4 126 uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
mbed_official 181:a4cbdfbbd2f4 127 This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
mbed_official 181:a4cbdfbbd2f4 128
mbed_official 181:a4cbdfbbd2f4 129 uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
mbed_official 181:a4cbdfbbd2f4 130 This parameter can be a value of @ref UART_AutoBaudRate_Enable */
mbed_official 181:a4cbdfbbd2f4 131
mbed_official 181:a4cbdfbbd2f4 132 uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
mbed_official 181:a4cbdfbbd2f4 133 detection is carried out.
mbed_official 181:a4cbdfbbd2f4 134 This parameter can be a value of @ref UART_AutoBaud_Rate_Mode */
mbed_official 181:a4cbdfbbd2f4 135
mbed_official 181:a4cbdfbbd2f4 136 uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
mbed_official 181:a4cbdfbbd2f4 137 This parameter can be a value of @ref UART_MSB_First */
mbed_official 181:a4cbdfbbd2f4 138 } UART_AdvFeatureInitTypeDef;
mbed_official 181:a4cbdfbbd2f4 139
mbed_official 181:a4cbdfbbd2f4 140 /**
mbed_official 181:a4cbdfbbd2f4 141 * @brief HAL UART State structures definition
mbed_official 181:a4cbdfbbd2f4 142 */
mbed_official 181:a4cbdfbbd2f4 143 typedef enum
mbed_official 181:a4cbdfbbd2f4 144 {
mbed_official 181:a4cbdfbbd2f4 145 HAL_UART_STATE_RESET = 0x00, /*!< Peripheral Reset state */
mbed_official 181:a4cbdfbbd2f4 146 HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
mbed_official 181:a4cbdfbbd2f4 147 HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
mbed_official 181:a4cbdfbbd2f4 148 HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
mbed_official 181:a4cbdfbbd2f4 149 HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
mbed_official 181:a4cbdfbbd2f4 150 HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
mbed_official 181:a4cbdfbbd2f4 151 HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
mbed_official 181:a4cbdfbbd2f4 152 HAL_UART_STATE_ERROR = 0x04 /*!< Error */
mbed_official 181:a4cbdfbbd2f4 153 }HAL_UART_StateTypeDef;
mbed_official 181:a4cbdfbbd2f4 154
mbed_official 181:a4cbdfbbd2f4 155 /**
mbed_official 181:a4cbdfbbd2f4 156 * @brief HAL UART Error Code structure definition
mbed_official 181:a4cbdfbbd2f4 157 */
mbed_official 181:a4cbdfbbd2f4 158 typedef enum
mbed_official 181:a4cbdfbbd2f4 159 {
mbed_official 181:a4cbdfbbd2f4 160 HAL_UART_ERROR_NONE = 0x00, /*!< No error */
mbed_official 181:a4cbdfbbd2f4 161 HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
mbed_official 181:a4cbdfbbd2f4 162 HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
mbed_official 181:a4cbdfbbd2f4 163 HAL_UART_ERROR_FE = 0x04, /*!< frame error */
mbed_official 181:a4cbdfbbd2f4 164 HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
mbed_official 181:a4cbdfbbd2f4 165 HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
mbed_official 181:a4cbdfbbd2f4 166 }HAL_UART_ErrorTypeDef;
mbed_official 181:a4cbdfbbd2f4 167
mbed_official 181:a4cbdfbbd2f4 168 /**
mbed_official 181:a4cbdfbbd2f4 169 * @brief UART clock sources definition
mbed_official 181:a4cbdfbbd2f4 170 */
mbed_official 181:a4cbdfbbd2f4 171 typedef enum
mbed_official 181:a4cbdfbbd2f4 172 {
mbed_official 181:a4cbdfbbd2f4 173 UART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
mbed_official 181:a4cbdfbbd2f4 174 UART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
mbed_official 181:a4cbdfbbd2f4 175 UART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
mbed_official 181:a4cbdfbbd2f4 176 UART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
mbed_official 181:a4cbdfbbd2f4 177 UART_CLOCKSOURCE_LSE = 0x08 /*!< LSE clock source */
mbed_official 181:a4cbdfbbd2f4 178 }UART_ClockSourceTypeDef;
mbed_official 181:a4cbdfbbd2f4 179
mbed_official 181:a4cbdfbbd2f4 180 /**
mbed_official 181:a4cbdfbbd2f4 181 * @brief UART handle Structure definition
mbed_official 181:a4cbdfbbd2f4 182 */
mbed_official 181:a4cbdfbbd2f4 183 typedef struct
mbed_official 181:a4cbdfbbd2f4 184 {
mbed_official 181:a4cbdfbbd2f4 185 USART_TypeDef *Instance; /* UART registers base address */
mbed_official 181:a4cbdfbbd2f4 186
mbed_official 181:a4cbdfbbd2f4 187 UART_InitTypeDef Init; /* UART communication parameters */
mbed_official 181:a4cbdfbbd2f4 188
mbed_official 181:a4cbdfbbd2f4 189 UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
mbed_official 181:a4cbdfbbd2f4 190
mbed_official 181:a4cbdfbbd2f4 191 uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
mbed_official 181:a4cbdfbbd2f4 192
mbed_official 181:a4cbdfbbd2f4 193 uint16_t TxXferSize; /* UART Tx Transfer size */
mbed_official 181:a4cbdfbbd2f4 194
mbed_official 181:a4cbdfbbd2f4 195 uint16_t TxXferCount; /* UART Tx Transfer Counter */
mbed_official 181:a4cbdfbbd2f4 196
mbed_official 181:a4cbdfbbd2f4 197 uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
mbed_official 181:a4cbdfbbd2f4 198
mbed_official 181:a4cbdfbbd2f4 199 uint16_t RxXferSize; /* UART Rx Transfer size */
mbed_official 181:a4cbdfbbd2f4 200
mbed_official 181:a4cbdfbbd2f4 201 uint16_t RxXferCount; /* UART Rx Transfer Counter */
mbed_official 181:a4cbdfbbd2f4 202
mbed_official 181:a4cbdfbbd2f4 203 uint16_t Mask; /* UART Rx RDR register mask */
mbed_official 181:a4cbdfbbd2f4 204
mbed_official 181:a4cbdfbbd2f4 205 DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
mbed_official 181:a4cbdfbbd2f4 206
mbed_official 181:a4cbdfbbd2f4 207 DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
mbed_official 181:a4cbdfbbd2f4 208
mbed_official 181:a4cbdfbbd2f4 209 HAL_LockTypeDef Lock; /* Locking object */
mbed_official 181:a4cbdfbbd2f4 210
mbed_official 181:a4cbdfbbd2f4 211 __IO HAL_UART_StateTypeDef State; /* UART communication state */
mbed_official 181:a4cbdfbbd2f4 212
mbed_official 181:a4cbdfbbd2f4 213 __IO HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
mbed_official 181:a4cbdfbbd2f4 214
mbed_official 181:a4cbdfbbd2f4 215 }UART_HandleTypeDef;
mbed_official 181:a4cbdfbbd2f4 216
mbed_official 181:a4cbdfbbd2f4 217
mbed_official 181:a4cbdfbbd2f4 218 /* Exported constants --------------------------------------------------------*/
mbed_official 181:a4cbdfbbd2f4 219 /** @defgroup UART_Exported_Constants
mbed_official 181:a4cbdfbbd2f4 220 * @{
mbed_official 181:a4cbdfbbd2f4 221 */
mbed_official 181:a4cbdfbbd2f4 222
mbed_official 181:a4cbdfbbd2f4 223 /** @defgroup UART_Stop_Bits UART Number of Stop Bits
mbed_official 181:a4cbdfbbd2f4 224 * @{
mbed_official 181:a4cbdfbbd2f4 225 */
mbed_official 181:a4cbdfbbd2f4 226 #define UART_STOPBITS_1 ((uint32_t)0x0000)
mbed_official 181:a4cbdfbbd2f4 227 #define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
mbed_official 181:a4cbdfbbd2f4 228 #define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
mbed_official 181:a4cbdfbbd2f4 229 ((STOPBITS) == UART_STOPBITS_2))
mbed_official 181:a4cbdfbbd2f4 230 /**
mbed_official 181:a4cbdfbbd2f4 231 * @}
mbed_official 181:a4cbdfbbd2f4 232 */
mbed_official 181:a4cbdfbbd2f4 233
mbed_official 181:a4cbdfbbd2f4 234 /** @defgroup UART_Parity UART Parity
mbed_official 181:a4cbdfbbd2f4 235 * @{
mbed_official 181:a4cbdfbbd2f4 236 */
mbed_official 181:a4cbdfbbd2f4 237 #define UART_PARITY_NONE ((uint32_t)0x0000)
mbed_official 181:a4cbdfbbd2f4 238 #define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
mbed_official 181:a4cbdfbbd2f4 239 #define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
mbed_official 181:a4cbdfbbd2f4 240 #define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
mbed_official 181:a4cbdfbbd2f4 241 ((PARITY) == UART_PARITY_EVEN) || \
mbed_official 181:a4cbdfbbd2f4 242 ((PARITY) == UART_PARITY_ODD))
mbed_official 181:a4cbdfbbd2f4 243 /**
mbed_official 181:a4cbdfbbd2f4 244 * @}
mbed_official 181:a4cbdfbbd2f4 245 */
mbed_official 181:a4cbdfbbd2f4 246
mbed_official 181:a4cbdfbbd2f4 247 /** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
mbed_official 181:a4cbdfbbd2f4 248 * @{
mbed_official 181:a4cbdfbbd2f4 249 */
mbed_official 181:a4cbdfbbd2f4 250 #define UART_HWCONTROL_NONE ((uint32_t)0x0000)
mbed_official 181:a4cbdfbbd2f4 251 #define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
mbed_official 181:a4cbdfbbd2f4 252 #define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
mbed_official 181:a4cbdfbbd2f4 253 #define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
mbed_official 181:a4cbdfbbd2f4 254 #define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
mbed_official 181:a4cbdfbbd2f4 255 (((CONTROL) == UART_HWCONTROL_NONE) || \
mbed_official 181:a4cbdfbbd2f4 256 ((CONTROL) == UART_HWCONTROL_RTS) || \
mbed_official 181:a4cbdfbbd2f4 257 ((CONTROL) == UART_HWCONTROL_CTS) || \
mbed_official 181:a4cbdfbbd2f4 258 ((CONTROL) == UART_HWCONTROL_RTS_CTS))
mbed_official 181:a4cbdfbbd2f4 259 /**
mbed_official 181:a4cbdfbbd2f4 260 * @}
mbed_official 181:a4cbdfbbd2f4 261 */
mbed_official 181:a4cbdfbbd2f4 262
mbed_official 181:a4cbdfbbd2f4 263 /** @defgroup UART_Mode UART Transfer Mode
mbed_official 181:a4cbdfbbd2f4 264 * @{
mbed_official 181:a4cbdfbbd2f4 265 */
mbed_official 181:a4cbdfbbd2f4 266 #define UART_MODE_RX ((uint32_t)USART_CR1_RE)
mbed_official 181:a4cbdfbbd2f4 267 #define UART_MODE_TX ((uint32_t)USART_CR1_TE)
mbed_official 181:a4cbdfbbd2f4 268 #define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
mbed_official 181:a4cbdfbbd2f4 269 #define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
mbed_official 181:a4cbdfbbd2f4 270 /**
mbed_official 181:a4cbdfbbd2f4 271 * @}
mbed_official 181:a4cbdfbbd2f4 272 */
mbed_official 181:a4cbdfbbd2f4 273
mbed_official 181:a4cbdfbbd2f4 274 /** @defgroup UART_State UART State
mbed_official 181:a4cbdfbbd2f4 275 * @{
mbed_official 181:a4cbdfbbd2f4 276 */
mbed_official 181:a4cbdfbbd2f4 277 #define UART_STATE_DISABLE ((uint32_t)0x0000)
mbed_official 181:a4cbdfbbd2f4 278 #define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
mbed_official 181:a4cbdfbbd2f4 279 #define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 280 ((STATE) == UART_STATE_ENABLE))
mbed_official 181:a4cbdfbbd2f4 281 /**
mbed_official 181:a4cbdfbbd2f4 282 * @}
mbed_official 181:a4cbdfbbd2f4 283 */
mbed_official 181:a4cbdfbbd2f4 284
mbed_official 181:a4cbdfbbd2f4 285 /** @defgroup UART_Over_Sampling UART Over Sampling
mbed_official 181:a4cbdfbbd2f4 286 * @{
mbed_official 181:a4cbdfbbd2f4 287 */
mbed_official 181:a4cbdfbbd2f4 288 #define UART_OVERSAMPLING_16 ((uint32_t)0x0000)
mbed_official 181:a4cbdfbbd2f4 289 #define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
mbed_official 181:a4cbdfbbd2f4 290 #define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
mbed_official 181:a4cbdfbbd2f4 291 ((SAMPLING) == UART_OVERSAMPLING_8))
mbed_official 181:a4cbdfbbd2f4 292 /**
mbed_official 181:a4cbdfbbd2f4 293 * @}
mbed_official 181:a4cbdfbbd2f4 294 */
mbed_official 181:a4cbdfbbd2f4 295
mbed_official 181:a4cbdfbbd2f4 296 /** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
mbed_official 181:a4cbdfbbd2f4 297 * @{
mbed_official 181:a4cbdfbbd2f4 298 */
mbed_official 181:a4cbdfbbd2f4 299 #define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000)
mbed_official 181:a4cbdfbbd2f4 300 #define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT)
mbed_official 181:a4cbdfbbd2f4 301 #define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) || \
mbed_official 181:a4cbdfbbd2f4 302 ((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED))
mbed_official 181:a4cbdfbbd2f4 303 /**
mbed_official 181:a4cbdfbbd2f4 304 * @}
mbed_official 181:a4cbdfbbd2f4 305 */
mbed_official 181:a4cbdfbbd2f4 306
mbed_official 181:a4cbdfbbd2f4 307
mbed_official 181:a4cbdfbbd2f4 308 /** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
mbed_official 181:a4cbdfbbd2f4 309 * @{
mbed_official 181:a4cbdfbbd2f4 310 */
mbed_official 181:a4cbdfbbd2f4 311 #define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 312 #define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
mbed_official 181:a4cbdfbbd2f4 313 #define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 314 ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
mbed_official 181:a4cbdfbbd2f4 315 /**
mbed_official 181:a4cbdfbbd2f4 316 * @}
mbed_official 181:a4cbdfbbd2f4 317 */
mbed_official 181:a4cbdfbbd2f4 318
mbed_official 181:a4cbdfbbd2f4 319 /** @defgroup UART_LIN UART Local Interconnection Network mode
mbed_official 181:a4cbdfbbd2f4 320 * @{
mbed_official 181:a4cbdfbbd2f4 321 */
mbed_official 181:a4cbdfbbd2f4 322 #define UART_LIN_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 323 #define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
mbed_official 181:a4cbdfbbd2f4 324 #define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 325 ((LIN) == UART_LIN_ENABLE))
mbed_official 181:a4cbdfbbd2f4 326 /**
mbed_official 181:a4cbdfbbd2f4 327 * @}
mbed_official 181:a4cbdfbbd2f4 328 */
mbed_official 181:a4cbdfbbd2f4 329
mbed_official 181:a4cbdfbbd2f4 330 /** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
mbed_official 181:a4cbdfbbd2f4 331 * @{
mbed_official 181:a4cbdfbbd2f4 332 */
mbed_official 181:a4cbdfbbd2f4 333 #define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 334 #define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
mbed_official 181:a4cbdfbbd2f4 335 #define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
mbed_official 181:a4cbdfbbd2f4 336 ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
mbed_official 181:a4cbdfbbd2f4 337 /**
mbed_official 181:a4cbdfbbd2f4 338 * @}
mbed_official 181:a4cbdfbbd2f4 339 */
mbed_official 181:a4cbdfbbd2f4 340
mbed_official 181:a4cbdfbbd2f4 341
mbed_official 181:a4cbdfbbd2f4 342
mbed_official 181:a4cbdfbbd2f4 343 /** @defgroup UART_One_Bit UART One Bit sampling
mbed_official 181:a4cbdfbbd2f4 344 * @{
mbed_official 181:a4cbdfbbd2f4 345 */
mbed_official 181:a4cbdfbbd2f4 346 #define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 347 #define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT)
mbed_official 181:a4cbdfbbd2f4 348 #define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) || \
mbed_official 181:a4cbdfbbd2f4 349 ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED))
mbed_official 181:a4cbdfbbd2f4 350 /**
mbed_official 181:a4cbdfbbd2f4 351 * @}
mbed_official 181:a4cbdfbbd2f4 352 */
mbed_official 181:a4cbdfbbd2f4 353
mbed_official 181:a4cbdfbbd2f4 354 /** @defgroup UART_DMA_Tx UART DMA Tx
mbed_official 181:a4cbdfbbd2f4 355 * @{
mbed_official 181:a4cbdfbbd2f4 356 */
mbed_official 181:a4cbdfbbd2f4 357 #define UART_DMA_TX_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 358 #define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
mbed_official 181:a4cbdfbbd2f4 359 #define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 360 ((DMATX) == UART_DMA_TX_ENABLE))
mbed_official 181:a4cbdfbbd2f4 361 /**
mbed_official 181:a4cbdfbbd2f4 362 * @}
mbed_official 181:a4cbdfbbd2f4 363 */
mbed_official 181:a4cbdfbbd2f4 364
mbed_official 181:a4cbdfbbd2f4 365 /** @defgroup UART_DMA_Rx UART DMA Rx
mbed_official 181:a4cbdfbbd2f4 366 * @{
mbed_official 181:a4cbdfbbd2f4 367 */
mbed_official 181:a4cbdfbbd2f4 368 #define UART_DMA_RX_DISABLE ((uint32_t)0x0000)
mbed_official 181:a4cbdfbbd2f4 369 #define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
mbed_official 181:a4cbdfbbd2f4 370 #define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 371 ((DMARX) == UART_DMA_RX_ENABLE))
mbed_official 181:a4cbdfbbd2f4 372 /**
mbed_official 181:a4cbdfbbd2f4 373 * @}
mbed_official 181:a4cbdfbbd2f4 374 */
mbed_official 181:a4cbdfbbd2f4 375
mbed_official 181:a4cbdfbbd2f4 376 /** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
mbed_official 181:a4cbdfbbd2f4 377 * @{
mbed_official 181:a4cbdfbbd2f4 378 */
mbed_official 181:a4cbdfbbd2f4 379 #define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000)
mbed_official 181:a4cbdfbbd2f4 380 #define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
mbed_official 181:a4cbdfbbd2f4 381 #define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 382 ((HDSEL) == UART_HALF_DUPLEX_ENABLE))
mbed_official 181:a4cbdfbbd2f4 383 /**
mbed_official 181:a4cbdfbbd2f4 384 * @}
mbed_official 181:a4cbdfbbd2f4 385 */
mbed_official 181:a4cbdfbbd2f4 386
mbed_official 181:a4cbdfbbd2f4 387 /** @defgroup UART_Flags UART Status Flags
mbed_official 181:a4cbdfbbd2f4 388 * Elements values convention: 0xXXXX
mbed_official 181:a4cbdfbbd2f4 389 * - 0xXXXX : Flag mask in the ISR register
mbed_official 181:a4cbdfbbd2f4 390 * @{
mbed_official 181:a4cbdfbbd2f4 391 */
mbed_official 181:a4cbdfbbd2f4 392 #define UART_FLAG_REACK ((uint32_t)0x00400000)
mbed_official 181:a4cbdfbbd2f4 393 #define UART_FLAG_TEACK ((uint32_t)0x00200000)
mbed_official 181:a4cbdfbbd2f4 394 #define UART_FLAG_WUF ((uint32_t)0x00100000)
mbed_official 181:a4cbdfbbd2f4 395 #define UART_FLAG_RWU ((uint32_t)0x00080000)
mbed_official 181:a4cbdfbbd2f4 396 #define UART_FLAG_SBKF ((uint32_t)0x00040000
mbed_official 181:a4cbdfbbd2f4 397 #define UART_FLAG_CMF ((uint32_t)0x00020000)
mbed_official 181:a4cbdfbbd2f4 398 #define UART_FLAG_BUSY ((uint32_t)0x00010000)
mbed_official 181:a4cbdfbbd2f4 399 #define UART_FLAG_ABRF ((uint32_t)0x00008000)
mbed_official 181:a4cbdfbbd2f4 400 #define UART_FLAG_ABRE ((uint32_t)0x00004000)
mbed_official 181:a4cbdfbbd2f4 401 #define UART_FLAG_EOBF ((uint32_t)0x00001000)
mbed_official 181:a4cbdfbbd2f4 402 #define UART_FLAG_RTOF ((uint32_t)0x00000800)
mbed_official 181:a4cbdfbbd2f4 403 #define UART_FLAG_CTS ((uint32_t)0x00000400)
mbed_official 181:a4cbdfbbd2f4 404 #define UART_FLAG_CTSIF ((uint32_t)0x00000200)
mbed_official 181:a4cbdfbbd2f4 405 #define UART_FLAG_LBDF ((uint32_t)0x00000100)
mbed_official 181:a4cbdfbbd2f4 406 #define UART_FLAG_TXE ((uint32_t)0x00000080)
mbed_official 181:a4cbdfbbd2f4 407 #define UART_FLAG_TC ((uint32_t)0x00000040)
mbed_official 181:a4cbdfbbd2f4 408 #define UART_FLAG_RXNE ((uint32_t)0x00000020)
mbed_official 181:a4cbdfbbd2f4 409 #define UART_FLAG_IDLE ((uint32_t)0x00000010)
mbed_official 181:a4cbdfbbd2f4 410 #define UART_FLAG_ORE ((uint32_t)0x00000008)
mbed_official 181:a4cbdfbbd2f4 411 #define UART_FLAG_NE ((uint32_t)0x00000004)
mbed_official 181:a4cbdfbbd2f4 412 #define UART_FLAG_FE ((uint32_t)0x00000002)
mbed_official 181:a4cbdfbbd2f4 413 #define UART_FLAG_PE ((uint32_t)0x00000001)
mbed_official 181:a4cbdfbbd2f4 414 /**
mbed_official 181:a4cbdfbbd2f4 415 * @}
mbed_official 181:a4cbdfbbd2f4 416 */
mbed_official 181:a4cbdfbbd2f4 417
mbed_official 181:a4cbdfbbd2f4 418 /** @defgroup UART_Interrupt_definition UART Interrupts Definition
mbed_official 181:a4cbdfbbd2f4 419 * Elements values convention: 0000ZZZZ0XXYYYYYb
mbed_official 181:a4cbdfbbd2f4 420 * - YYYYY : Interrupt source position in the XX register (5bits)
mbed_official 181:a4cbdfbbd2f4 421 * - XX : Interrupt source register (2bits)
mbed_official 181:a4cbdfbbd2f4 422 * - 01: CR1 register
mbed_official 181:a4cbdfbbd2f4 423 * - 10: CR2 register
mbed_official 181:a4cbdfbbd2f4 424 * - 11: CR3 register
mbed_official 181:a4cbdfbbd2f4 425 * - ZZZZ : Flag position in the ISR register(4bits)
mbed_official 181:a4cbdfbbd2f4 426 * @{
mbed_official 181:a4cbdfbbd2f4 427 */
mbed_official 181:a4cbdfbbd2f4 428 #define UART_IT_PE ((uint32_t)0x0028)
mbed_official 181:a4cbdfbbd2f4 429 #define UART_IT_TXE ((uint32_t)0x0727)
mbed_official 181:a4cbdfbbd2f4 430 #define UART_IT_TC ((uint32_t)0x0626)
mbed_official 181:a4cbdfbbd2f4 431 #define UART_IT_RXNE ((uint32_t)0x0525)
mbed_official 181:a4cbdfbbd2f4 432 #define UART_IT_IDLE ((uint32_t)0x0424)
mbed_official 181:a4cbdfbbd2f4 433 #define UART_IT_LBD ((uint32_t)0x0846)
mbed_official 181:a4cbdfbbd2f4 434 #define UART_IT_CTS ((uint32_t)0x096A)
mbed_official 181:a4cbdfbbd2f4 435 #define UART_IT_CM ((uint32_t)0x142E)
mbed_official 181:a4cbdfbbd2f4 436 #define UART_IT_WUF ((uint32_t)0x1476)
mbed_official 181:a4cbdfbbd2f4 437
mbed_official 181:a4cbdfbbd2f4 438 /** Elements values convention: 000000000XXYYYYYb
mbed_official 181:a4cbdfbbd2f4 439 * - YYYYY : Interrupt source position in the XX register (5bits)
mbed_official 181:a4cbdfbbd2f4 440 * - XX : Interrupt source register (2bits)
mbed_official 181:a4cbdfbbd2f4 441 * - 01: CR1 register
mbed_official 181:a4cbdfbbd2f4 442 * - 10: CR2 register
mbed_official 181:a4cbdfbbd2f4 443 * - 11: CR3 register
mbed_official 181:a4cbdfbbd2f4 444 */
mbed_official 181:a4cbdfbbd2f4 445 #define UART_IT_ERR ((uint32_t)0x0060)
mbed_official 181:a4cbdfbbd2f4 446
mbed_official 181:a4cbdfbbd2f4 447 /** Elements values convention: 0000ZZZZ00000000b
mbed_official 181:a4cbdfbbd2f4 448 * - ZZZZ : Flag position in the ISR register(4bits)
mbed_official 181:a4cbdfbbd2f4 449 */
mbed_official 181:a4cbdfbbd2f4 450 #define UART_IT_ORE ((uint32_t)0x0300)
mbed_official 181:a4cbdfbbd2f4 451 #define UART_IT_NE ((uint32_t)0x0200)
mbed_official 181:a4cbdfbbd2f4 452 #define UART_IT_FE ((uint32_t)0x0100)
mbed_official 181:a4cbdfbbd2f4 453 /**
mbed_official 181:a4cbdfbbd2f4 454 * @}
mbed_official 181:a4cbdfbbd2f4 455 */
mbed_official 181:a4cbdfbbd2f4 456
mbed_official 181:a4cbdfbbd2f4 457 /** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
mbed_official 181:a4cbdfbbd2f4 458 * @{
mbed_official 181:a4cbdfbbd2f4 459 */
mbed_official 181:a4cbdfbbd2f4 460 #define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
mbed_official 181:a4cbdfbbd2f4 461 #define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
mbed_official 181:a4cbdfbbd2f4 462 #define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
mbed_official 181:a4cbdfbbd2f4 463 #define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
mbed_official 181:a4cbdfbbd2f4 464 #define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
mbed_official 181:a4cbdfbbd2f4 465 #define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
mbed_official 181:a4cbdfbbd2f4 466 #define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */
mbed_official 181:a4cbdfbbd2f4 467 #define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
mbed_official 181:a4cbdfbbd2f4 468 #define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
mbed_official 181:a4cbdfbbd2f4 469 #define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
mbed_official 181:a4cbdfbbd2f4 470 #define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
mbed_official 181:a4cbdfbbd2f4 471 #define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
mbed_official 181:a4cbdfbbd2f4 472 /**
mbed_official 181:a4cbdfbbd2f4 473 * @}
mbed_official 181:a4cbdfbbd2f4 474 */
mbed_official 181:a4cbdfbbd2f4 475
mbed_official 181:a4cbdfbbd2f4 476 /** @defgroup UART_Request_Parameters UART Request Parameters
mbed_official 181:a4cbdfbbd2f4 477 * @{
mbed_official 181:a4cbdfbbd2f4 478 */
mbed_official 181:a4cbdfbbd2f4 479 #define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
mbed_official 181:a4cbdfbbd2f4 480 #define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
mbed_official 181:a4cbdfbbd2f4 481 #define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
mbed_official 181:a4cbdfbbd2f4 482 #define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
mbed_official 181:a4cbdfbbd2f4 483 #define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
mbed_official 181:a4cbdfbbd2f4 484 #define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
mbed_official 181:a4cbdfbbd2f4 485 ((PARAM) == UART_SENDBREAK_REQUEST) || \
mbed_official 181:a4cbdfbbd2f4 486 ((PARAM) == UART_MUTE_MODE_REQUEST) || \
mbed_official 181:a4cbdfbbd2f4 487 ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
mbed_official 181:a4cbdfbbd2f4 488 ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
mbed_official 181:a4cbdfbbd2f4 489 /**
mbed_official 181:a4cbdfbbd2f4 490 * @}
mbed_official 181:a4cbdfbbd2f4 491 */
mbed_official 181:a4cbdfbbd2f4 492
mbed_official 181:a4cbdfbbd2f4 493 /** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
mbed_official 181:a4cbdfbbd2f4 494 * @{
mbed_official 181:a4cbdfbbd2f4 495 */
mbed_official 181:a4cbdfbbd2f4 496 #define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 497 #define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
mbed_official 181:a4cbdfbbd2f4 498 #define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
mbed_official 181:a4cbdfbbd2f4 499 #define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
mbed_official 181:a4cbdfbbd2f4 500 #define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
mbed_official 181:a4cbdfbbd2f4 501 #define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
mbed_official 181:a4cbdfbbd2f4 502 #define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
mbed_official 181:a4cbdfbbd2f4 503 #define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040)
mbed_official 181:a4cbdfbbd2f4 504 #define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
mbed_official 181:a4cbdfbbd2f4 505 #define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \
mbed_official 181:a4cbdfbbd2f4 506 UART_ADVFEATURE_TXINVERT_INIT | \
mbed_official 181:a4cbdfbbd2f4 507 UART_ADVFEATURE_RXINVERT_INIT | \
mbed_official 181:a4cbdfbbd2f4 508 UART_ADVFEATURE_DATAINVERT_INIT | \
mbed_official 181:a4cbdfbbd2f4 509 UART_ADVFEATURE_SWAP_INIT | \
mbed_official 181:a4cbdfbbd2f4 510 UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
mbed_official 181:a4cbdfbbd2f4 511 UART_ADVFEATURE_DMADISABLEONERROR_INIT | \
mbed_official 181:a4cbdfbbd2f4 512 UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
mbed_official 181:a4cbdfbbd2f4 513 UART_ADVFEATURE_MSBFIRST_INIT))
mbed_official 181:a4cbdfbbd2f4 514 /**
mbed_official 181:a4cbdfbbd2f4 515 * @}
mbed_official 181:a4cbdfbbd2f4 516 */
mbed_official 181:a4cbdfbbd2f4 517
mbed_official 181:a4cbdfbbd2f4 518 /** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
mbed_official 181:a4cbdfbbd2f4 519 * @{
mbed_official 181:a4cbdfbbd2f4 520 */
mbed_official 181:a4cbdfbbd2f4 521 #define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 522 #define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
mbed_official 181:a4cbdfbbd2f4 523 #define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 524 ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
mbed_official 181:a4cbdfbbd2f4 525 /**
mbed_official 181:a4cbdfbbd2f4 526 * @}
mbed_official 181:a4cbdfbbd2f4 527 */
mbed_official 181:a4cbdfbbd2f4 528
mbed_official 181:a4cbdfbbd2f4 529 /** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
mbed_official 181:a4cbdfbbd2f4 530 * @{
mbed_official 181:a4cbdfbbd2f4 531 */
mbed_official 181:a4cbdfbbd2f4 532 #define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 533 #define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
mbed_official 181:a4cbdfbbd2f4 534 #define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 535 ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
mbed_official 181:a4cbdfbbd2f4 536 /**
mbed_official 181:a4cbdfbbd2f4 537 * @}
mbed_official 181:a4cbdfbbd2f4 538 */
mbed_official 181:a4cbdfbbd2f4 539
mbed_official 181:a4cbdfbbd2f4 540 /** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
mbed_official 181:a4cbdfbbd2f4 541 * @{
mbed_official 181:a4cbdfbbd2f4 542 */
mbed_official 181:a4cbdfbbd2f4 543 #define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 544 #define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
mbed_official 181:a4cbdfbbd2f4 545 #define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 546 ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
mbed_official 181:a4cbdfbbd2f4 547 /**
mbed_official 181:a4cbdfbbd2f4 548 * @}
mbed_official 181:a4cbdfbbd2f4 549 */
mbed_official 181:a4cbdfbbd2f4 550
mbed_official 181:a4cbdfbbd2f4 551 /** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
mbed_official 181:a4cbdfbbd2f4 552 * @{
mbed_official 181:a4cbdfbbd2f4 553 */
mbed_official 181:a4cbdfbbd2f4 554 #define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 555 #define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
mbed_official 181:a4cbdfbbd2f4 556 #define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 557 ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
mbed_official 181:a4cbdfbbd2f4 558 /**
mbed_official 181:a4cbdfbbd2f4 559 * @}
mbed_official 181:a4cbdfbbd2f4 560 */
mbed_official 181:a4cbdfbbd2f4 561
mbed_official 181:a4cbdfbbd2f4 562 /** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
mbed_official 181:a4cbdfbbd2f4 563 * @{
mbed_official 181:a4cbdfbbd2f4 564 */
mbed_official 181:a4cbdfbbd2f4 565 #define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 566 #define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
mbed_official 181:a4cbdfbbd2f4 567 #define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
mbed_official 181:a4cbdfbbd2f4 568 ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
mbed_official 181:a4cbdfbbd2f4 569 /**
mbed_official 181:a4cbdfbbd2f4 570 * @}
mbed_official 181:a4cbdfbbd2f4 571 */
mbed_official 181:a4cbdfbbd2f4 572
mbed_official 181:a4cbdfbbd2f4 573 /** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
mbed_official 181:a4cbdfbbd2f4 574 * @{
mbed_official 181:a4cbdfbbd2f4 575 */
mbed_official 181:a4cbdfbbd2f4 576 #define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 577 #define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
mbed_official 181:a4cbdfbbd2f4 578 #define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 579 ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
mbed_official 181:a4cbdfbbd2f4 580 /**
mbed_official 181:a4cbdfbbd2f4 581 * @}
mbed_official 181:a4cbdfbbd2f4 582 */
mbed_official 181:a4cbdfbbd2f4 583
mbed_official 181:a4cbdfbbd2f4 584 /** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
mbed_official 181:a4cbdfbbd2f4 585 * @{
mbed_official 181:a4cbdfbbd2f4 586 */
mbed_official 181:a4cbdfbbd2f4 587 #define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 588 #define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
mbed_official 181:a4cbdfbbd2f4 589 #define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
mbed_official 181:a4cbdfbbd2f4 590 ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
mbed_official 181:a4cbdfbbd2f4 591 /**
mbed_official 181:a4cbdfbbd2f4 592 * @}
mbed_official 181:a4cbdfbbd2f4 593 */
mbed_official 181:a4cbdfbbd2f4 594
mbed_official 181:a4cbdfbbd2f4 595 /** @defgroup UART_MSB_First UART Advanced Feature MSB First
mbed_official 181:a4cbdfbbd2f4 596 * @{
mbed_official 181:a4cbdfbbd2f4 597 */
mbed_official 181:a4cbdfbbd2f4 598 #define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 599 #define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
mbed_official 181:a4cbdfbbd2f4 600 #define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 601 ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
mbed_official 181:a4cbdfbbd2f4 602 /**
mbed_official 181:a4cbdfbbd2f4 603 * @}
mbed_official 181:a4cbdfbbd2f4 604 */
mbed_official 181:a4cbdfbbd2f4 605
mbed_official 181:a4cbdfbbd2f4 606 /** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
mbed_official 181:a4cbdfbbd2f4 607 * @{
mbed_official 181:a4cbdfbbd2f4 608 */
mbed_official 181:a4cbdfbbd2f4 609 #define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 610 #define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
mbed_official 181:a4cbdfbbd2f4 611 #define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 612 ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
mbed_official 181:a4cbdfbbd2f4 613 /**
mbed_official 181:a4cbdfbbd2f4 614 * @}
mbed_official 181:a4cbdfbbd2f4 615 */
mbed_official 181:a4cbdfbbd2f4 616
mbed_official 181:a4cbdfbbd2f4 617 /** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
mbed_official 181:a4cbdfbbd2f4 618 * @{
mbed_official 181:a4cbdfbbd2f4 619 */
mbed_official 181:a4cbdfbbd2f4 620 #define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 621 #define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
mbed_official 181:a4cbdfbbd2f4 622 #define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
mbed_official 181:a4cbdfbbd2f4 623 ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
mbed_official 181:a4cbdfbbd2f4 624 /**
mbed_official 181:a4cbdfbbd2f4 625 * @}
mbed_official 181:a4cbdfbbd2f4 626 */
mbed_official 181:a4cbdfbbd2f4 627
mbed_official 181:a4cbdfbbd2f4 628 /** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
mbed_official 181:a4cbdfbbd2f4 629 * @{
mbed_official 181:a4cbdfbbd2f4 630 */
mbed_official 181:a4cbdfbbd2f4 631 #define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24)
mbed_official 181:a4cbdfbbd2f4 632 /**
mbed_official 181:a4cbdfbbd2f4 633 * @}
mbed_official 181:a4cbdfbbd2f4 634 */
mbed_official 181:a4cbdfbbd2f4 635
mbed_official 181:a4cbdfbbd2f4 636 /** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
mbed_official 181:a4cbdfbbd2f4 637 * @{
mbed_official 181:a4cbdfbbd2f4 638 */
mbed_official 181:a4cbdfbbd2f4 639 #define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
mbed_official 181:a4cbdfbbd2f4 640 #define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
mbed_official 181:a4cbdfbbd2f4 641 #define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
mbed_official 181:a4cbdfbbd2f4 642 #define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
mbed_official 181:a4cbdfbbd2f4 643 ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
mbed_official 181:a4cbdfbbd2f4 644 ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
mbed_official 181:a4cbdfbbd2f4 645 /**
mbed_official 181:a4cbdfbbd2f4 646 * @}
mbed_official 181:a4cbdfbbd2f4 647 */
mbed_official 181:a4cbdfbbd2f4 648
mbed_official 181:a4cbdfbbd2f4 649 /** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
mbed_official 181:a4cbdfbbd2f4 650 * @{
mbed_official 181:a4cbdfbbd2f4 651 */
mbed_official 181:a4cbdfbbd2f4 652 #define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000)
mbed_official 181:a4cbdfbbd2f4 653 #define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
mbed_official 181:a4cbdfbbd2f4 654 #define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \
mbed_official 181:a4cbdfbbd2f4 655 ((POLARITY) == UART_DE_POLARITY_LOW))
mbed_official 181:a4cbdfbbd2f4 656 /**
mbed_official 181:a4cbdfbbd2f4 657 * @}
mbed_official 181:a4cbdfbbd2f4 658 */
mbed_official 181:a4cbdfbbd2f4 659
mbed_official 181:a4cbdfbbd2f4 660 /** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
mbed_official 181:a4cbdfbbd2f4 661 * @{
mbed_official 181:a4cbdfbbd2f4 662 */
mbed_official 181:a4cbdfbbd2f4 663 #define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21)
mbed_official 181:a4cbdfbbd2f4 664 /**
mbed_official 181:a4cbdfbbd2f4 665 * @}
mbed_official 181:a4cbdfbbd2f4 666 */
mbed_official 181:a4cbdfbbd2f4 667
mbed_official 181:a4cbdfbbd2f4 668 /** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
mbed_official 181:a4cbdfbbd2f4 669 * @{
mbed_official 181:a4cbdfbbd2f4 670 */
mbed_official 181:a4cbdfbbd2f4 671 #define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16)
mbed_official 181:a4cbdfbbd2f4 672 /**
mbed_official 181:a4cbdfbbd2f4 673 * @}
mbed_official 181:a4cbdfbbd2f4 674 */
mbed_official 181:a4cbdfbbd2f4 675
mbed_official 181:a4cbdfbbd2f4 676 /** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
mbed_official 181:a4cbdfbbd2f4 677 * @{
mbed_official 181:a4cbdfbbd2f4 678 */
mbed_official 181:a4cbdfbbd2f4 679 #define UART_IT_MASK ((uint32_t)0x001F)
mbed_official 181:a4cbdfbbd2f4 680 /**
mbed_official 181:a4cbdfbbd2f4 681 * @}
mbed_official 181:a4cbdfbbd2f4 682 */
mbed_official 181:a4cbdfbbd2f4 683
mbed_official 181:a4cbdfbbd2f4 684 /**
mbed_official 181:a4cbdfbbd2f4 685 * @}
mbed_official 181:a4cbdfbbd2f4 686 */
mbed_official 181:a4cbdfbbd2f4 687
mbed_official 181:a4cbdfbbd2f4 688 /* Exported macro ------------------------------------------------------------*/
mbed_official 181:a4cbdfbbd2f4 689 /** @defgroup UART_Exported_Macros
mbed_official 181:a4cbdfbbd2f4 690 * @{
mbed_official 181:a4cbdfbbd2f4 691 */
mbed_official 181:a4cbdfbbd2f4 692
mbed_official 181:a4cbdfbbd2f4 693 /** @brief Reset UART handle state
mbed_official 181:a4cbdfbbd2f4 694 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 695 * The Handle Instance which can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 696 * @retval None
mbed_official 181:a4cbdfbbd2f4 697 */
mbed_official 181:a4cbdfbbd2f4 698 #define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
mbed_official 181:a4cbdfbbd2f4 699
mbed_official 181:a4cbdfbbd2f4 700 /** @brief Checks whether the specified UART flag is set or not.
mbed_official 181:a4cbdfbbd2f4 701 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 702 * This parameter can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 703 * @param __FLAG__: specifies the flag to check.
mbed_official 181:a4cbdfbbd2f4 704 * This parameter can be one of the following values:
mbed_official 181:a4cbdfbbd2f4 705 * @arg UART_FLAG_REACK: Receive enable ackowledge flag
mbed_official 181:a4cbdfbbd2f4 706 * @arg UART_FLAG_TEACK: Transmit enable ackowledge flag
mbed_official 181:a4cbdfbbd2f4 707 * @arg UART_FLAG_WUF: Wake up from stop mode flag
mbed_official 181:a4cbdfbbd2f4 708 * @arg UART_FLAG_RWU: Receiver wake up flag (is the UART in mute mode)
mbed_official 181:a4cbdfbbd2f4 709 * @arg UART_FLAG_SBKF: Send Break flag
mbed_official 181:a4cbdfbbd2f4 710 * @arg UART_FLAG_CMF: Character match flag
mbed_official 181:a4cbdfbbd2f4 711 * @arg UART_FLAG_BUSY: Busy flag
mbed_official 181:a4cbdfbbd2f4 712 * @arg UART_FLAG_ABRF: Auto Baud rate detection flag
mbed_official 181:a4cbdfbbd2f4 713 * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
mbed_official 181:a4cbdfbbd2f4 714 * @arg UART_FLAG_EOBF: End of block flag
mbed_official 181:a4cbdfbbd2f4 715 * @arg UART_FLAG_RTOF: Receiver timeout flag
mbed_official 181:a4cbdfbbd2f4 716 * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
mbed_official 181:a4cbdfbbd2f4 717 * @arg UART_FLAG_LBD: LIN Break detection flag
mbed_official 181:a4cbdfbbd2f4 718 * @arg UART_FLAG_TXE: Transmit data register empty flag
mbed_official 181:a4cbdfbbd2f4 719 * @arg UART_FLAG_TC: Transmission Complete flag
mbed_official 181:a4cbdfbbd2f4 720 * @arg UART_FLAG_RXNE: Receive data register not empty flag
mbed_official 181:a4cbdfbbd2f4 721 * @arg UART_FLAG_IDLE: Idle Line detection flag
mbed_official 181:a4cbdfbbd2f4 722 * @arg UART_FLAG_ORE: OverRun Error flag
mbed_official 181:a4cbdfbbd2f4 723 * @arg UART_FLAG_NE: Noise Error flag
mbed_official 181:a4cbdfbbd2f4 724 * @arg UART_FLAG_FE: Framing Error flag
mbed_official 181:a4cbdfbbd2f4 725 * @arg UART_FLAG_PE: Parity Error flag
mbed_official 181:a4cbdfbbd2f4 726 * @retval The new state of __FLAG__ (TRUE or FALSE).
mbed_official 181:a4cbdfbbd2f4 727 */
mbed_official 181:a4cbdfbbd2f4 728 #define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
mbed_official 181:a4cbdfbbd2f4 729
mbed_official 181:a4cbdfbbd2f4 730 /** @brief Enables the specified UART interrupt.
mbed_official 181:a4cbdfbbd2f4 731 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 732 * This parameter can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 733 * @param __INTERRUPT__: specifies the UART interrupt source to enable.
mbed_official 181:a4cbdfbbd2f4 734 * This parameter can be one of the following values:
mbed_official 181:a4cbdfbbd2f4 735 * @arg UART_IT_WUF: Wakeup from stop mode interrupt
mbed_official 181:a4cbdfbbd2f4 736 * @arg UART_IT_CM: Character match interrupt
mbed_official 181:a4cbdfbbd2f4 737 * @arg UART_IT_CTS: CTS change interrupt
mbed_official 181:a4cbdfbbd2f4 738 * @arg UART_IT_LBD: LIN Break detection interrupt
mbed_official 181:a4cbdfbbd2f4 739 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
mbed_official 181:a4cbdfbbd2f4 740 * @arg UART_IT_TC: Transmission complete interrupt
mbed_official 181:a4cbdfbbd2f4 741 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
mbed_official 181:a4cbdfbbd2f4 742 * @arg UART_IT_IDLE: Idle line detection interrupt
mbed_official 181:a4cbdfbbd2f4 743 * @arg UART_IT_PE: Parity Error interrupt
mbed_official 181:a4cbdfbbd2f4 744 * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
mbed_official 181:a4cbdfbbd2f4 745 * @retval None
mbed_official 181:a4cbdfbbd2f4 746 */
mbed_official 181:a4cbdfbbd2f4 747 #define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 |= (1 << ((__INTERRUPT__) & UART_IT_MASK))): \
mbed_official 181:a4cbdfbbd2f4 748 ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 |= (1 << ((__INTERRUPT__) & UART_IT_MASK))): \
mbed_official 181:a4cbdfbbd2f4 749 ((__HANDLE__)->Instance->CR3 |= (1 << ((__INTERRUPT__) & UART_IT_MASK))))
mbed_official 181:a4cbdfbbd2f4 750
mbed_official 181:a4cbdfbbd2f4 751 /** @brief Disables the specified UART interrupt.
mbed_official 181:a4cbdfbbd2f4 752 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 753 * This parameter can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 754 * @param __INTERRUPT__: specifies the UART interrupt source to disable.
mbed_official 181:a4cbdfbbd2f4 755 * This parameter can be one of the following values:
mbed_official 181:a4cbdfbbd2f4 756 * @arg UART_IT_WUF: Wakeup from stop mode interrupt
mbed_official 181:a4cbdfbbd2f4 757 * @arg UART_IT_CM: Character match interrupt
mbed_official 181:a4cbdfbbd2f4 758 * @arg UART_IT_CTS: CTS change interrupt
mbed_official 181:a4cbdfbbd2f4 759 * @arg UART_IT_LBD: LIN Break detection interrupt
mbed_official 181:a4cbdfbbd2f4 760 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
mbed_official 181:a4cbdfbbd2f4 761 * @arg UART_IT_TC: Transmission complete interrupt
mbed_official 181:a4cbdfbbd2f4 762 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
mbed_official 181:a4cbdfbbd2f4 763 * @arg UART_IT_IDLE: Idle line detection interrupt
mbed_official 181:a4cbdfbbd2f4 764 * @arg UART_IT_PE: Parity Error interrupt
mbed_official 181:a4cbdfbbd2f4 765 * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
mbed_official 181:a4cbdfbbd2f4 766 * @retval None
mbed_official 181:a4cbdfbbd2f4 767 */
mbed_official 181:a4cbdfbbd2f4 768 #define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & UART_IT_MASK))): \
mbed_official 181:a4cbdfbbd2f4 769 ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & UART_IT_MASK))): \
mbed_official 181:a4cbdfbbd2f4 770 ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & UART_IT_MASK))))
mbed_official 181:a4cbdfbbd2f4 771
mbed_official 181:a4cbdfbbd2f4 772 /** @brief Checks whether the specified UART interrupt has occurred or not.
mbed_official 181:a4cbdfbbd2f4 773 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 774 * This parameter can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 775 * @param __IT__: specifies the UART interrupt to check.
mbed_official 181:a4cbdfbbd2f4 776 * This parameter can be one of the following values:
mbed_official 181:a4cbdfbbd2f4 777 * @arg UART_IT_WUF: Wakeup from stop mode interrupt
mbed_official 181:a4cbdfbbd2f4 778 * @arg UART_IT_CM: Character match interrupt
mbed_official 181:a4cbdfbbd2f4 779 * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
mbed_official 181:a4cbdfbbd2f4 780 * @arg UART_IT_LBD: LIN Break detection interrupt
mbed_official 181:a4cbdfbbd2f4 781 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
mbed_official 181:a4cbdfbbd2f4 782 * @arg UART_IT_TC: Transmission complete interrupt
mbed_official 181:a4cbdfbbd2f4 783 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
mbed_official 181:a4cbdfbbd2f4 784 * @arg UART_IT_IDLE: Idle line detection interrupt
mbed_official 181:a4cbdfbbd2f4 785 * @arg UART_IT_ORE: OverRun Error interrupt
mbed_official 181:a4cbdfbbd2f4 786 * @arg UART_IT_NE: Noise Error interrupt
mbed_official 181:a4cbdfbbd2f4 787 * @arg UART_IT_FE: Framing Error interrupt
mbed_official 181:a4cbdfbbd2f4 788 * @arg UART_IT_PE: Parity Error interrupt
mbed_official 181:a4cbdfbbd2f4 789 * @retval The new state of __IT__ (TRUE or FALSE).
mbed_official 181:a4cbdfbbd2f4 790 */
mbed_official 181:a4cbdfbbd2f4 791 #define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
mbed_official 181:a4cbdfbbd2f4 792
mbed_official 181:a4cbdfbbd2f4 793 /** @brief Checks whether the specified UART interrupt source is enabled.
mbed_official 181:a4cbdfbbd2f4 794 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 795 * This parameter can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 796 * @param __IT__: specifies the UART interrupt source to check.
mbed_official 181:a4cbdfbbd2f4 797 * This parameter can be one of the following values:
mbed_official 181:a4cbdfbbd2f4 798 * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
mbed_official 181:a4cbdfbbd2f4 799 * @arg UART_IT_LBD: LIN Break detection interrupt
mbed_official 181:a4cbdfbbd2f4 800 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
mbed_official 181:a4cbdfbbd2f4 801 * @arg UART_IT_TC: Transmission complete interrupt
mbed_official 181:a4cbdfbbd2f4 802 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
mbed_official 181:a4cbdfbbd2f4 803 * @arg UART_IT_IDLE: Idle line detection interrupt
mbed_official 181:a4cbdfbbd2f4 804 * @arg UART_IT_ORE: OverRun Error interrupt
mbed_official 181:a4cbdfbbd2f4 805 * @arg UART_IT_NE: Noise Error interrupt
mbed_official 181:a4cbdfbbd2f4 806 * @arg UART_IT_FE: Framing Error interrupt
mbed_official 181:a4cbdfbbd2f4 807 * @arg UART_IT_PE: Parity Error interrupt
mbed_official 181:a4cbdfbbd2f4 808 * @retval The new state of __IT__ (TRUE or FALSE).
mbed_official 181:a4cbdfbbd2f4 809 */
mbed_official 181:a4cbdfbbd2f4 810 #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
mbed_official 181:a4cbdfbbd2f4 811 (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
mbed_official 181:a4cbdfbbd2f4 812
mbed_official 181:a4cbdfbbd2f4 813 /** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
mbed_official 181:a4cbdfbbd2f4 814 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 815 * This parameter can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 816 * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
mbed_official 181:a4cbdfbbd2f4 817 * to clear the corresponding interrupt
mbed_official 181:a4cbdfbbd2f4 818 * This parameter can be one of the following values:
mbed_official 181:a4cbdfbbd2f4 819 * @arg UART_CLEAR_PEF: Parity Error Clear Flag
mbed_official 181:a4cbdfbbd2f4 820 * @arg UART_CLEAR_FEF: Framing Error Clear Flag
mbed_official 181:a4cbdfbbd2f4 821 * @arg UART_CLEAR_NEF: Noise detected Clear Flag
mbed_official 181:a4cbdfbbd2f4 822 * @arg UART_CLEAR_OREF: OverRun Error Clear Flag
mbed_official 181:a4cbdfbbd2f4 823 * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
mbed_official 181:a4cbdfbbd2f4 824 * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
mbed_official 181:a4cbdfbbd2f4 825 * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
mbed_official 181:a4cbdfbbd2f4 826 * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
mbed_official 181:a4cbdfbbd2f4 827 * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
mbed_official 181:a4cbdfbbd2f4 828 * @arg UART_CLEAR_EOBF: End Of Block Clear Flag
mbed_official 181:a4cbdfbbd2f4 829 * @arg UART_CLEAR_CMF: Character Match Clear Flag
mbed_official 181:a4cbdfbbd2f4 830 * @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag
mbed_official 181:a4cbdfbbd2f4 831 * @retval None
mbed_official 181:a4cbdfbbd2f4 832 */
mbed_official 181:a4cbdfbbd2f4 833 #define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
mbed_official 181:a4cbdfbbd2f4 834
mbed_official 181:a4cbdfbbd2f4 835 /** @brief Set a specific UART request flag.
mbed_official 181:a4cbdfbbd2f4 836 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 837 * This parameter can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 838 * @param __REQ__: specifies the request flag to set
mbed_official 181:a4cbdfbbd2f4 839 * This parameter can be one of the following values:
mbed_official 181:a4cbdfbbd2f4 840 * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
mbed_official 181:a4cbdfbbd2f4 841 * @arg UART_SENDBREAK_REQUEST: Send Break Request
mbed_official 181:a4cbdfbbd2f4 842 * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
mbed_official 181:a4cbdfbbd2f4 843 * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
mbed_official 181:a4cbdfbbd2f4 844 * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
mbed_official 181:a4cbdfbbd2f4 845 * @retval None
mbed_official 181:a4cbdfbbd2f4 846 */
mbed_official 181:a4cbdfbbd2f4 847 #define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
mbed_official 181:a4cbdfbbd2f4 848
mbed_official 181:a4cbdfbbd2f4 849 /** @brief Enable UART
mbed_official 181:a4cbdfbbd2f4 850 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 851 * The Handle Instance can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 852 * @retval None
mbed_official 181:a4cbdfbbd2f4 853 */
mbed_official 181:a4cbdfbbd2f4 854 #define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
mbed_official 181:a4cbdfbbd2f4 855
mbed_official 181:a4cbdfbbd2f4 856 /** @brief Disable UART
mbed_official 181:a4cbdfbbd2f4 857 * @param __HANDLE__: specifies the UART Handle.
mbed_official 181:a4cbdfbbd2f4 858 * The Handle Instance can be USART1, USART2 or LPUART.
mbed_official 181:a4cbdfbbd2f4 859 * @retval None
mbed_official 181:a4cbdfbbd2f4 860 */
mbed_official 181:a4cbdfbbd2f4 861 #define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
mbed_official 181:a4cbdfbbd2f4 862
mbed_official 181:a4cbdfbbd2f4 863 /** @brief BRR division operation to set BRR register with LPUART
mbed_official 181:a4cbdfbbd2f4 864 * @param _PCLK_: LPUART clock
mbed_official 181:a4cbdfbbd2f4 865 * @param _BAUD_: Baud rate set by the user
mbed_official 181:a4cbdfbbd2f4 866 * @retval Division result
mbed_official 181:a4cbdfbbd2f4 867 */
mbed_official 181:a4cbdfbbd2f4 868 #define __DIV_LPUART(_PCLK_, _BAUD_) (((_PCLK_)*256)/((_BAUD_)))
mbed_official 181:a4cbdfbbd2f4 869
mbed_official 181:a4cbdfbbd2f4 870 /** @brief BRR division operation to set BRR register in 8-bit oversampling mode
mbed_official 181:a4cbdfbbd2f4 871 * @param _PCLK_: UART clock
mbed_official 181:a4cbdfbbd2f4 872 * @param _BAUD_: Baud rate set by the user
mbed_official 181:a4cbdfbbd2f4 873 * @retval Division result
mbed_official 181:a4cbdfbbd2f4 874 */
mbed_official 181:a4cbdfbbd2f4 875 #define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_)))
mbed_official 181:a4cbdfbbd2f4 876
mbed_official 181:a4cbdfbbd2f4 877 /** @brief BRR division operation to set BRR register in 16-bit oversampling mode
mbed_official 181:a4cbdfbbd2f4 878 * @param _PCLK_: UART clock
mbed_official 181:a4cbdfbbd2f4 879 * @param _BAUD_: Baud rate set by the user
mbed_official 181:a4cbdfbbd2f4 880 * @retval Division result
mbed_official 181:a4cbdfbbd2f4 881 */
mbed_official 181:a4cbdfbbd2f4 882 #define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_)))
mbed_official 181:a4cbdfbbd2f4 883
mbed_official 181:a4cbdfbbd2f4 884 /** @brief Check UART Baud rate
mbed_official 181:a4cbdfbbd2f4 885 * @param BAUDRATE: Baudrate specified by the user
mbed_official 181:a4cbdfbbd2f4 886 * The maximum Baud Rate is derived from the maximum clock on L0 (i.e. 32 MHz)
mbed_official 181:a4cbdfbbd2f4 887 * divided by the smallest oversampling used on the USART (i.e. 8)
mbed_official 181:a4cbdfbbd2f4 888 * @retval Test result (TRUE or FALSE).
mbed_official 181:a4cbdfbbd2f4 889 */
mbed_official 181:a4cbdfbbd2f4 890 #define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 4000001)
mbed_official 181:a4cbdfbbd2f4 891
mbed_official 181:a4cbdfbbd2f4 892 /** @brief Check UART byte address
mbed_official 181:a4cbdfbbd2f4 893 * @param ADDRESS: UART 8-bit address for wake-up process scheme
mbed_official 181:a4cbdfbbd2f4 894 * @retval Test result (TRUE or FALSE).
mbed_official 181:a4cbdfbbd2f4 895 */
mbed_official 181:a4cbdfbbd2f4 896 #define IS_UART_7B_ADDRESS(ADDRESS) ((ADDRESS) <= 0x7F)
mbed_official 181:a4cbdfbbd2f4 897
mbed_official 181:a4cbdfbbd2f4 898 /** @brief Check UART 4-bit address
mbed_official 181:a4cbdfbbd2f4 899 * @param ADDRESS: UART 4-bit address for wake-up process scheme
mbed_official 181:a4cbdfbbd2f4 900 * @retval Test result (TRUE or FALSE).
mbed_official 181:a4cbdfbbd2f4 901 */
mbed_official 181:a4cbdfbbd2f4 902 #define IS_UART_4B_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
mbed_official 181:a4cbdfbbd2f4 903
mbed_official 181:a4cbdfbbd2f4 904 /** @brief Check UART assertion time
mbed_official 181:a4cbdfbbd2f4 905 * @param TIME: 5-bit value assertion time
mbed_official 181:a4cbdfbbd2f4 906 * @retval Test result (TRUE or FALSE).
mbed_official 181:a4cbdfbbd2f4 907 */
mbed_official 181:a4cbdfbbd2f4 908 #define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
mbed_official 181:a4cbdfbbd2f4 909
mbed_official 181:a4cbdfbbd2f4 910 /** @brief Check UART deassertion time
mbed_official 181:a4cbdfbbd2f4 911 * @param TIME: 5-bit value deassertion time
mbed_official 181:a4cbdfbbd2f4 912 * @retval Test result (TRUE or FALSE).
mbed_official 181:a4cbdfbbd2f4 913 */
mbed_official 181:a4cbdfbbd2f4 914 #define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
mbed_official 181:a4cbdfbbd2f4 915
mbed_official 181:a4cbdfbbd2f4 916 /**
mbed_official 181:a4cbdfbbd2f4 917 * @}
mbed_official 181:a4cbdfbbd2f4 918 */
mbed_official 181:a4cbdfbbd2f4 919 /* Include UART HAL Extension module */
mbed_official 181:a4cbdfbbd2f4 920 #include "stm32l0xx_hal_uart_ex.h"
mbed_official 181:a4cbdfbbd2f4 921 /* Exported functions --------------------------------------------------------*/
mbed_official 181:a4cbdfbbd2f4 922 /* Initialization/de-initialization functions ********************************/
mbed_official 181:a4cbdfbbd2f4 923 HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 924 HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 925 HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
mbed_official 181:a4cbdfbbd2f4 926 HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
mbed_official 181:a4cbdfbbd2f4 927 HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 928 void HAL_UART_MspInit(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 929 void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 930
mbed_official 181:a4cbdfbbd2f4 931 /* IO operation functions *****************************************************/
mbed_official 181:a4cbdfbbd2f4 932 HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
mbed_official 181:a4cbdfbbd2f4 933 HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
mbed_official 181:a4cbdfbbd2f4 934 HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
mbed_official 181:a4cbdfbbd2f4 935 HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
mbed_official 181:a4cbdfbbd2f4 936 HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
mbed_official 181:a4cbdfbbd2f4 937 HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
mbed_official 181:a4cbdfbbd2f4 938 HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 939 HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 940 HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 941 void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 942 void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 943 void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 944 void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 945 void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 946 void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 947 void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 948
mbed_official 181:a4cbdfbbd2f4 949 /* Peripheral Control and State functions ************************************/
mbed_official 181:a4cbdfbbd2f4 950 HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 951 HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 952 void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 953 HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 954 HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 955 HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 956 HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 957 uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 958
mbed_official 181:a4cbdfbbd2f4 959 /* Non-User functions ********************************************************/
mbed_official 181:a4cbdfbbd2f4 960 void UART_SetConfig(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 961 HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 962 HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
mbed_official 181:a4cbdfbbd2f4 963 void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
mbed_official 181:a4cbdfbbd2f4 964 /**
mbed_official 181:a4cbdfbbd2f4 965 * @}
mbed_official 181:a4cbdfbbd2f4 966 */
mbed_official 181:a4cbdfbbd2f4 967
mbed_official 181:a4cbdfbbd2f4 968 /**
mbed_official 181:a4cbdfbbd2f4 969 * @}
mbed_official 181:a4cbdfbbd2f4 970 */
mbed_official 181:a4cbdfbbd2f4 971
mbed_official 181:a4cbdfbbd2f4 972 #ifdef __cplusplus
mbed_official 181:a4cbdfbbd2f4 973 }
mbed_official 181:a4cbdfbbd2f4 974 #endif
mbed_official 181:a4cbdfbbd2f4 975
mbed_official 181:a4cbdfbbd2f4 976 #endif /* __STM32L0xx_HAL_UART_H */
mbed_official 181:a4cbdfbbd2f4 977
mbed_official 181:a4cbdfbbd2f4 978 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/