mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_sim.h
- Committer:
- mbed_official
- Date:
- 2014-04-02
- Revision:
- 146:f64d43ff0c18
File content as of revision 146:f64d43ff0c18:
/* * Copyright (c) 2014, Freescale Semiconductor, Inc. * All rights reserved. * * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. */ /* * WARNING! DO NOT EDIT THIS FILE DIRECTLY! * * This file was generated automatically and any changes may be lost. */ #ifndef __HW_SIM_REGISTERS_H__ #define __HW_SIM_REGISTERS_H__ #include "regs.h" /* * MK64F12 SIM * * System Integration Module * * Registers defined in this header file: * - HW_SIM_SOPT1 - System Options Register 1 * - HW_SIM_SOPT1CFG - SOPT1 Configuration Register * - HW_SIM_SOPT2 - System Options Register 2 * - HW_SIM_SOPT4 - System Options Register 4 * - HW_SIM_SOPT5 - System Options Register 5 * - HW_SIM_SOPT7 - System Options Register 7 * - HW_SIM_SDID - System Device Identification Register * - HW_SIM_SCGC1 - System Clock Gating Control Register 1 * - HW_SIM_SCGC2 - System Clock Gating Control Register 2 * - HW_SIM_SCGC3 - System Clock Gating Control Register 3 * - HW_SIM_SCGC4 - System Clock Gating Control Register 4 * - HW_SIM_SCGC5 - System Clock Gating Control Register 5 * - HW_SIM_SCGC6 - System Clock Gating Control Register 6 * - HW_SIM_SCGC7 - System Clock Gating Control Register 7 * - HW_SIM_CLKDIV1 - System Clock Divider Register 1 * - HW_SIM_CLKDIV2 - System Clock Divider Register 2 * - HW_SIM_FCFG1 - Flash Configuration Register 1 * - HW_SIM_FCFG2 - Flash Configuration Register 2 * - HW_SIM_UIDH - Unique Identification Register High * - HW_SIM_UIDMH - Unique Identification Register Mid-High * - HW_SIM_UIDML - Unique Identification Register Mid Low * - HW_SIM_UIDL - Unique Identification Register Low * * - hw_sim_t - Struct containing all module registers. */ //! @name Module base addresses //@{ #ifndef REGS_SIM_BASE #define HW_SIM_INSTANCE_COUNT (1U) //!< Number of instances of the SIM module. #define REGS_SIM_BASE (0x40047000U) //!< Base address for SIM. #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SOPT1 - System Options Register 1 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SOPT1 - System Options Register 1 (RW) * * Reset value: 0x80000000U * * The SOPT1 register is only reset on POR or LVD. */ typedef union _hw_sim_sopt1 { uint32_t U; struct _hw_sim_sopt1_bitfields { uint32_t RESERVED0 : 12; //!< [11:0] uint32_t RAMSIZE : 4; //!< [15:12] RAM size uint32_t RESERVED1 : 2; //!< [17:16] uint32_t OSC32KSEL : 2; //!< [19:18] 32K oscillator clock select uint32_t RESERVED2 : 9; //!< [28:20] uint32_t USBVSTBY : 1; //!< [29] USB voltage regulator in standby //! mode during VLPR and VLPW modes uint32_t USBSSTBY : 1; //!< [30] USB voltage regulator in standby //! mode during Stop, VLPS, LLS and VLLS modes. uint32_t USBREGEN : 1; //!< [31] USB voltage regulator enable } B; } hw_sim_sopt1_t; #endif /*! * @name Constants and macros for entire SIM_SOPT1 register */ //@{ #define HW_SIM_SOPT1_ADDR (REGS_SIM_BASE + 0x0U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SOPT1 (*(__IO hw_sim_sopt1_t *) HW_SIM_SOPT1_ADDR) #define HW_SIM_SOPT1_RD() (HW_SIM_SOPT1.U) #define HW_SIM_SOPT1_WR(v) (HW_SIM_SOPT1.U = (v)) #define HW_SIM_SOPT1_SET(v) (HW_SIM_SOPT1_WR(HW_SIM_SOPT1_RD() | (v))) #define HW_SIM_SOPT1_CLR(v) (HW_SIM_SOPT1_WR(HW_SIM_SOPT1_RD() & ~(v))) #define HW_SIM_SOPT1_TOG(v) (HW_SIM_SOPT1_WR(HW_SIM_SOPT1_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SOPT1 bitfields */ /*! * @name Register SIM_SOPT1, field RAMSIZE[15:12] (RO) * * This field specifies the amount of system RAM available on the device. * * Values: * - 0001 - 8 KB * - 0011 - 16 KB * - 0100 - 24 KB * - 0101 - 32 KB * - 0110 - 48 KB * - 0111 - 64 KB * - 1000 - 96 KB * - 1001 - 128 KB * - 1011 - 256 KB */ //@{ #define BP_SIM_SOPT1_RAMSIZE (12U) //!< Bit position for SIM_SOPT1_RAMSIZE. #define BM_SIM_SOPT1_RAMSIZE (0x0000F000U) //!< Bit mask for SIM_SOPT1_RAMSIZE. #define BS_SIM_SOPT1_RAMSIZE (4U) //!< Bit field size in bits for SIM_SOPT1_RAMSIZE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT1_RAMSIZE field. #define BR_SIM_SOPT1_RAMSIZE (HW_SIM_SOPT1.B.RAMSIZE) #endif //@} /*! * @name Register SIM_SOPT1, field OSC32KSEL[19:18] (RW) * * Selects the 32 kHz clock source (ERCLK32K) for LPTMR. This field is reset * only on POR/LVD. * * Values: * - 00 - System oscillator (OSC32KCLK) * - 01 - Reserved * - 10 - RTC 32.768kHz oscillator * - 11 - LPO 1 kHz */ //@{ #define BP_SIM_SOPT1_OSC32KSEL (18U) //!< Bit position for SIM_SOPT1_OSC32KSEL. #define BM_SIM_SOPT1_OSC32KSEL (0x000C0000U) //!< Bit mask for SIM_SOPT1_OSC32KSEL. #define BS_SIM_SOPT1_OSC32KSEL (2U) //!< Bit field size in bits for SIM_SOPT1_OSC32KSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT1_OSC32KSEL field. #define BR_SIM_SOPT1_OSC32KSEL (HW_SIM_SOPT1.B.OSC32KSEL) #endif //! @brief Format value for bitfield SIM_SOPT1_OSC32KSEL. #define BF_SIM_SOPT1_OSC32KSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT1_OSC32KSEL), uint32_t) & BM_SIM_SOPT1_OSC32KSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the OSC32KSEL field to a new value. #define BW_SIM_SOPT1_OSC32KSEL(v) (HW_SIM_SOPT1_WR((HW_SIM_SOPT1_RD() & ~BM_SIM_SOPT1_OSC32KSEL) | BF_SIM_SOPT1_OSC32KSEL(v))) #endif //@} /*! * @name Register SIM_SOPT1, field USBVSTBY[29] (RW) * * Controls whether the USB voltage regulator is placed in standby mode during * VLPR and VLPW modes. * * Values: * - 0 - USB voltage regulator not in standby during VLPR and VLPW modes. * - 1 - USB voltage regulator in standby during VLPR and VLPW modes. */ //@{ #define BP_SIM_SOPT1_USBVSTBY (29U) //!< Bit position for SIM_SOPT1_USBVSTBY. #define BM_SIM_SOPT1_USBVSTBY (0x20000000U) //!< Bit mask for SIM_SOPT1_USBVSTBY. #define BS_SIM_SOPT1_USBVSTBY (1U) //!< Bit field size in bits for SIM_SOPT1_USBVSTBY. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT1_USBVSTBY field. #define BR_SIM_SOPT1_USBVSTBY (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR, BP_SIM_SOPT1_USBVSTBY)) #endif //! @brief Format value for bitfield SIM_SOPT1_USBVSTBY. #define BF_SIM_SOPT1_USBVSTBY(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT1_USBVSTBY), uint32_t) & BM_SIM_SOPT1_USBVSTBY) #ifndef __LANGUAGE_ASM__ //! @brief Set the USBVSTBY field to a new value. #define BW_SIM_SOPT1_USBVSTBY(v) (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR, BP_SIM_SOPT1_USBVSTBY) = (v)) #endif //@} /*! * @name Register SIM_SOPT1, field USBSSTBY[30] (RW) * * Controls whether the USB voltage regulator is placed in standby mode during * Stop, VLPS, LLS and VLLS modes. * * Values: * - 0 - USB voltage regulator not in standby during Stop, VLPS, LLS and VLLS * modes. * - 1 - USB voltage regulator in standby during Stop, VLPS, LLS and VLLS modes. */ //@{ #define BP_SIM_SOPT1_USBSSTBY (30U) //!< Bit position for SIM_SOPT1_USBSSTBY. #define BM_SIM_SOPT1_USBSSTBY (0x40000000U) //!< Bit mask for SIM_SOPT1_USBSSTBY. #define BS_SIM_SOPT1_USBSSTBY (1U) //!< Bit field size in bits for SIM_SOPT1_USBSSTBY. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT1_USBSSTBY field. #define BR_SIM_SOPT1_USBSSTBY (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR, BP_SIM_SOPT1_USBSSTBY)) #endif //! @brief Format value for bitfield SIM_SOPT1_USBSSTBY. #define BF_SIM_SOPT1_USBSSTBY(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT1_USBSSTBY), uint32_t) & BM_SIM_SOPT1_USBSSTBY) #ifndef __LANGUAGE_ASM__ //! @brief Set the USBSSTBY field to a new value. #define BW_SIM_SOPT1_USBSSTBY(v) (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR, BP_SIM_SOPT1_USBSSTBY) = (v)) #endif //@} /*! * @name Register SIM_SOPT1, field USBREGEN[31] (RW) * * Controls whether the USB voltage regulator is enabled. * * Values: * - 0 - USB voltage regulator is disabled. * - 1 - USB voltage regulator is enabled. */ //@{ #define BP_SIM_SOPT1_USBREGEN (31U) //!< Bit position for SIM_SOPT1_USBREGEN. #define BM_SIM_SOPT1_USBREGEN (0x80000000U) //!< Bit mask for SIM_SOPT1_USBREGEN. #define BS_SIM_SOPT1_USBREGEN (1U) //!< Bit field size in bits for SIM_SOPT1_USBREGEN. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT1_USBREGEN field. #define BR_SIM_SOPT1_USBREGEN (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR, BP_SIM_SOPT1_USBREGEN)) #endif //! @brief Format value for bitfield SIM_SOPT1_USBREGEN. #define BF_SIM_SOPT1_USBREGEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT1_USBREGEN), uint32_t) & BM_SIM_SOPT1_USBREGEN) #ifndef __LANGUAGE_ASM__ //! @brief Set the USBREGEN field to a new value. #define BW_SIM_SOPT1_USBREGEN(v) (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR, BP_SIM_SOPT1_USBREGEN) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SOPT1CFG - SOPT1 Configuration Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SOPT1CFG - SOPT1 Configuration Register (RW) * * Reset value: 0x00000000U * * The SOPT1CFG register is reset on System Reset not VLLS. */ typedef union _hw_sim_sopt1cfg { uint32_t U; struct _hw_sim_sopt1cfg_bitfields { uint32_t RESERVED0 : 24; //!< [23:0] uint32_t URWE : 1; //!< [24] USB voltage regulator enable write enable uint32_t UVSWE : 1; //!< [25] USB voltage regulator VLP standby write //! enable uint32_t USSWE : 1; //!< [26] USB voltage regulator stop standby //! write enable uint32_t RESERVED1 : 5; //!< [31:27] } B; } hw_sim_sopt1cfg_t; #endif /*! * @name Constants and macros for entire SIM_SOPT1CFG register */ //@{ #define HW_SIM_SOPT1CFG_ADDR (REGS_SIM_BASE + 0x4U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SOPT1CFG (*(__IO hw_sim_sopt1cfg_t *) HW_SIM_SOPT1CFG_ADDR) #define HW_SIM_SOPT1CFG_RD() (HW_SIM_SOPT1CFG.U) #define HW_SIM_SOPT1CFG_WR(v) (HW_SIM_SOPT1CFG.U = (v)) #define HW_SIM_SOPT1CFG_SET(v) (HW_SIM_SOPT1CFG_WR(HW_SIM_SOPT1CFG_RD() | (v))) #define HW_SIM_SOPT1CFG_CLR(v) (HW_SIM_SOPT1CFG_WR(HW_SIM_SOPT1CFG_RD() & ~(v))) #define HW_SIM_SOPT1CFG_TOG(v) (HW_SIM_SOPT1CFG_WR(HW_SIM_SOPT1CFG_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SOPT1CFG bitfields */ /*! * @name Register SIM_SOPT1CFG, field URWE[24] (RW) * * Writing one to the URWE bit allows the SOPT1 USBREGEN bit to be written. This * register bit clears after a write to USBREGEN. * * Values: * - 0 - SOPT1 USBREGEN cannot be written. * - 1 - SOPT1 USBREGEN can be written. */ //@{ #define BP_SIM_SOPT1CFG_URWE (24U) //!< Bit position for SIM_SOPT1CFG_URWE. #define BM_SIM_SOPT1CFG_URWE (0x01000000U) //!< Bit mask for SIM_SOPT1CFG_URWE. #define BS_SIM_SOPT1CFG_URWE (1U) //!< Bit field size in bits for SIM_SOPT1CFG_URWE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT1CFG_URWE field. #define BR_SIM_SOPT1CFG_URWE (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR, BP_SIM_SOPT1CFG_URWE)) #endif //! @brief Format value for bitfield SIM_SOPT1CFG_URWE. #define BF_SIM_SOPT1CFG_URWE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT1CFG_URWE), uint32_t) & BM_SIM_SOPT1CFG_URWE) #ifndef __LANGUAGE_ASM__ //! @brief Set the URWE field to a new value. #define BW_SIM_SOPT1CFG_URWE(v) (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR, BP_SIM_SOPT1CFG_URWE) = (v)) #endif //@} /*! * @name Register SIM_SOPT1CFG, field UVSWE[25] (RW) * * Writing one to the UVSWE bit allows the SOPT1 USBVSTBY bit to be written. * This register bit clears after a write to USBVSTBY. * * Values: * - 0 - SOPT1 USBVSTBY cannot be written. * - 1 - SOPT1 USBVSTBY can be written. */ //@{ #define BP_SIM_SOPT1CFG_UVSWE (25U) //!< Bit position for SIM_SOPT1CFG_UVSWE. #define BM_SIM_SOPT1CFG_UVSWE (0x02000000U) //!< Bit mask for SIM_SOPT1CFG_UVSWE. #define BS_SIM_SOPT1CFG_UVSWE (1U) //!< Bit field size in bits for SIM_SOPT1CFG_UVSWE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT1CFG_UVSWE field. #define BR_SIM_SOPT1CFG_UVSWE (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR, BP_SIM_SOPT1CFG_UVSWE)) #endif //! @brief Format value for bitfield SIM_SOPT1CFG_UVSWE. #define BF_SIM_SOPT1CFG_UVSWE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT1CFG_UVSWE), uint32_t) & BM_SIM_SOPT1CFG_UVSWE) #ifndef __LANGUAGE_ASM__ //! @brief Set the UVSWE field to a new value. #define BW_SIM_SOPT1CFG_UVSWE(v) (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR, BP_SIM_SOPT1CFG_UVSWE) = (v)) #endif //@} /*! * @name Register SIM_SOPT1CFG, field USSWE[26] (RW) * * Writing one to the USSWE bit allows the SOPT1 USBSSTBY bit to be written. * This register bit clears after a write to USBSSTBY. * * Values: * - 0 - SOPT1 USBSSTBY cannot be written. * - 1 - SOPT1 USBSSTBY can be written. */ //@{ #define BP_SIM_SOPT1CFG_USSWE (26U) //!< Bit position for SIM_SOPT1CFG_USSWE. #define BM_SIM_SOPT1CFG_USSWE (0x04000000U) //!< Bit mask for SIM_SOPT1CFG_USSWE. #define BS_SIM_SOPT1CFG_USSWE (1U) //!< Bit field size in bits for SIM_SOPT1CFG_USSWE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT1CFG_USSWE field. #define BR_SIM_SOPT1CFG_USSWE (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR, BP_SIM_SOPT1CFG_USSWE)) #endif //! @brief Format value for bitfield SIM_SOPT1CFG_USSWE. #define BF_SIM_SOPT1CFG_USSWE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT1CFG_USSWE), uint32_t) & BM_SIM_SOPT1CFG_USSWE) #ifndef __LANGUAGE_ASM__ //! @brief Set the USSWE field to a new value. #define BW_SIM_SOPT1CFG_USSWE(v) (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR, BP_SIM_SOPT1CFG_USSWE) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SOPT2 - System Options Register 2 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SOPT2 - System Options Register 2 (RW) * * Reset value: 0x00001000U * * SOPT2 contains the controls for selecting many of the module clock source * options on this device. See the Clock Distribution chapter for more information * including clocking diagrams and definitions of device clocks. */ typedef union _hw_sim_sopt2 { uint32_t U; struct _hw_sim_sopt2_bitfields { uint32_t RESERVED0 : 4; //!< [3:0] uint32_t RTCCLKOUTSEL : 1; //!< [4] RTC clock out select uint32_t CLKOUTSEL : 3; //!< [7:5] CLKOUT select uint32_t FBSL : 2; //!< [9:8] FlexBus security level uint32_t RESERVED1 : 1; //!< [10] uint32_t PTD7PAD : 1; //!< [11] PTD7 pad drive strength uint32_t TRACECLKSEL : 1; //!< [12] Debug trace clock select uint32_t RESERVED2 : 3; //!< [15:13] uint32_t PLLFLLSEL : 2; //!< [17:16] PLL/FLL clock select uint32_t USBSRC : 1; //!< [18] USB clock source select uint32_t RMIISRC : 1; //!< [19] RMII clock source select uint32_t TIMESRC : 2; //!< [21:20] IEEE 1588 timestamp clock source //! select uint32_t RESERVED3 : 6; //!< [27:22] uint32_t SDHCSRC : 2; //!< [29:28] SDHC clock source select uint32_t RESERVED4 : 2; //!< [31:30] } B; } hw_sim_sopt2_t; #endif /*! * @name Constants and macros for entire SIM_SOPT2 register */ //@{ #define HW_SIM_SOPT2_ADDR (REGS_SIM_BASE + 0x1004U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SOPT2 (*(__IO hw_sim_sopt2_t *) HW_SIM_SOPT2_ADDR) #define HW_SIM_SOPT2_RD() (HW_SIM_SOPT2.U) #define HW_SIM_SOPT2_WR(v) (HW_SIM_SOPT2.U = (v)) #define HW_SIM_SOPT2_SET(v) (HW_SIM_SOPT2_WR(HW_SIM_SOPT2_RD() | (v))) #define HW_SIM_SOPT2_CLR(v) (HW_SIM_SOPT2_WR(HW_SIM_SOPT2_RD() & ~(v))) #define HW_SIM_SOPT2_TOG(v) (HW_SIM_SOPT2_WR(HW_SIM_SOPT2_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SOPT2 bitfields */ /*! * @name Register SIM_SOPT2, field RTCCLKOUTSEL[4] (RW) * * Selects either the RTC 1 Hz clock or the 32.768kHz clock to be output on the * RTC_CLKOUT pin. * * Values: * - 0 - RTC 1 Hz clock is output on the RTC_CLKOUT pin. * - 1 - RTC 32.768kHz clock is output on the RTC_CLKOUT pin. */ //@{ #define BP_SIM_SOPT2_RTCCLKOUTSEL (4U) //!< Bit position for SIM_SOPT2_RTCCLKOUTSEL. #define BM_SIM_SOPT2_RTCCLKOUTSEL (0x00000010U) //!< Bit mask for SIM_SOPT2_RTCCLKOUTSEL. #define BS_SIM_SOPT2_RTCCLKOUTSEL (1U) //!< Bit field size in bits for SIM_SOPT2_RTCCLKOUTSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_RTCCLKOUTSEL field. #define BR_SIM_SOPT2_RTCCLKOUTSEL (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_RTCCLKOUTSEL)) #endif //! @brief Format value for bitfield SIM_SOPT2_RTCCLKOUTSEL. #define BF_SIM_SOPT2_RTCCLKOUTSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_RTCCLKOUTSEL), uint32_t) & BM_SIM_SOPT2_RTCCLKOUTSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the RTCCLKOUTSEL field to a new value. #define BW_SIM_SOPT2_RTCCLKOUTSEL(v) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_RTCCLKOUTSEL) = (v)) #endif //@} /*! * @name Register SIM_SOPT2, field CLKOUTSEL[7:5] (RW) * * Selects the clock to output on the CLKOUT pin. * * Values: * - 000 - FlexBus CLKOUT * - 001 - Reserved * - 010 - Flash clock * - 011 - LPO clock (1 kHz) * - 100 - MCGIRCLK * - 101 - RTC 32.768kHz clock * - 110 - OSCERCLK0 * - 111 - IRC 48 MHz clock */ //@{ #define BP_SIM_SOPT2_CLKOUTSEL (5U) //!< Bit position for SIM_SOPT2_CLKOUTSEL. #define BM_SIM_SOPT2_CLKOUTSEL (0x000000E0U) //!< Bit mask for SIM_SOPT2_CLKOUTSEL. #define BS_SIM_SOPT2_CLKOUTSEL (3U) //!< Bit field size in bits for SIM_SOPT2_CLKOUTSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_CLKOUTSEL field. #define BR_SIM_SOPT2_CLKOUTSEL (HW_SIM_SOPT2.B.CLKOUTSEL) #endif //! @brief Format value for bitfield SIM_SOPT2_CLKOUTSEL. #define BF_SIM_SOPT2_CLKOUTSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_CLKOUTSEL), uint32_t) & BM_SIM_SOPT2_CLKOUTSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the CLKOUTSEL field to a new value. #define BW_SIM_SOPT2_CLKOUTSEL(v) (HW_SIM_SOPT2_WR((HW_SIM_SOPT2_RD() & ~BM_SIM_SOPT2_CLKOUTSEL) | BF_SIM_SOPT2_CLKOUTSEL(v))) #endif //@} /*! * @name Register SIM_SOPT2, field FBSL[9:8] (RW) * * If flash security is enabled, then this field affects what CPU operations can * access off-chip via the FlexBus interface. This field has no effect if flash * security is not enabled. * * Values: * - 00 - All off-chip accesses (instruction and data) via the FlexBus are * disallowed. * - 01 - All off-chip accesses (instruction and data) via the FlexBus are * disallowed. * - 10 - Off-chip instruction accesses are disallowed. Data accesses are * allowed. * - 11 - Off-chip instruction accesses and data accesses are allowed. */ //@{ #define BP_SIM_SOPT2_FBSL (8U) //!< Bit position for SIM_SOPT2_FBSL. #define BM_SIM_SOPT2_FBSL (0x00000300U) //!< Bit mask for SIM_SOPT2_FBSL. #define BS_SIM_SOPT2_FBSL (2U) //!< Bit field size in bits for SIM_SOPT2_FBSL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_FBSL field. #define BR_SIM_SOPT2_FBSL (HW_SIM_SOPT2.B.FBSL) #endif //! @brief Format value for bitfield SIM_SOPT2_FBSL. #define BF_SIM_SOPT2_FBSL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_FBSL), uint32_t) & BM_SIM_SOPT2_FBSL) #ifndef __LANGUAGE_ASM__ //! @brief Set the FBSL field to a new value. #define BW_SIM_SOPT2_FBSL(v) (HW_SIM_SOPT2_WR((HW_SIM_SOPT2_RD() & ~BM_SIM_SOPT2_FBSL) | BF_SIM_SOPT2_FBSL(v))) #endif //@} /*! * @name Register SIM_SOPT2, field PTD7PAD[11] (RW) * * Controls the output drive strength of the PTD7 pin by selecting either one or * two pads to drive it. * * Values: * - 0 - Single-pad drive strength for PTD7. * - 1 - Double pad drive strength for PTD7. */ //@{ #define BP_SIM_SOPT2_PTD7PAD (11U) //!< Bit position for SIM_SOPT2_PTD7PAD. #define BM_SIM_SOPT2_PTD7PAD (0x00000800U) //!< Bit mask for SIM_SOPT2_PTD7PAD. #define BS_SIM_SOPT2_PTD7PAD (1U) //!< Bit field size in bits for SIM_SOPT2_PTD7PAD. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_PTD7PAD field. #define BR_SIM_SOPT2_PTD7PAD (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_PTD7PAD)) #endif //! @brief Format value for bitfield SIM_SOPT2_PTD7PAD. #define BF_SIM_SOPT2_PTD7PAD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_PTD7PAD), uint32_t) & BM_SIM_SOPT2_PTD7PAD) #ifndef __LANGUAGE_ASM__ //! @brief Set the PTD7PAD field to a new value. #define BW_SIM_SOPT2_PTD7PAD(v) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_PTD7PAD) = (v)) #endif //@} /*! * @name Register SIM_SOPT2, field TRACECLKSEL[12] (RW) * * Selects the core/system clock or MCG output clock (MCGOUTCLK) as the trace * clock source. * * Values: * - 0 - MCGOUTCLK * - 1 - Core/system clock */ //@{ #define BP_SIM_SOPT2_TRACECLKSEL (12U) //!< Bit position for SIM_SOPT2_TRACECLKSEL. #define BM_SIM_SOPT2_TRACECLKSEL (0x00001000U) //!< Bit mask for SIM_SOPT2_TRACECLKSEL. #define BS_SIM_SOPT2_TRACECLKSEL (1U) //!< Bit field size in bits for SIM_SOPT2_TRACECLKSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_TRACECLKSEL field. #define BR_SIM_SOPT2_TRACECLKSEL (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_TRACECLKSEL)) #endif //! @brief Format value for bitfield SIM_SOPT2_TRACECLKSEL. #define BF_SIM_SOPT2_TRACECLKSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_TRACECLKSEL), uint32_t) & BM_SIM_SOPT2_TRACECLKSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the TRACECLKSEL field to a new value. #define BW_SIM_SOPT2_TRACECLKSEL(v) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_TRACECLKSEL) = (v)) #endif //@} /*! * @name Register SIM_SOPT2, field PLLFLLSEL[17:16] (RW) * * Selects the high frequency clock for various peripheral clocking options. * * Values: * - 00 - MCGFLLCLK clock * - 01 - MCGPLLCLK clock * - 10 - Reserved * - 11 - IRC48 MHz clock */ //@{ #define BP_SIM_SOPT2_PLLFLLSEL (16U) //!< Bit position for SIM_SOPT2_PLLFLLSEL. #define BM_SIM_SOPT2_PLLFLLSEL (0x00030000U) //!< Bit mask for SIM_SOPT2_PLLFLLSEL. #define BS_SIM_SOPT2_PLLFLLSEL (2U) //!< Bit field size in bits for SIM_SOPT2_PLLFLLSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_PLLFLLSEL field. #define BR_SIM_SOPT2_PLLFLLSEL (HW_SIM_SOPT2.B.PLLFLLSEL) #endif //! @brief Format value for bitfield SIM_SOPT2_PLLFLLSEL. #define BF_SIM_SOPT2_PLLFLLSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_PLLFLLSEL), uint32_t) & BM_SIM_SOPT2_PLLFLLSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the PLLFLLSEL field to a new value. #define BW_SIM_SOPT2_PLLFLLSEL(v) (HW_SIM_SOPT2_WR((HW_SIM_SOPT2_RD() & ~BM_SIM_SOPT2_PLLFLLSEL) | BF_SIM_SOPT2_PLLFLLSEL(v))) #endif //@} /*! * @name Register SIM_SOPT2, field USBSRC[18] (RW) * * Selects the clock source for the USB 48 MHz clock. * * Values: * - 0 - External bypass clock (USB_CLKIN). * - 1 - MCGFLLCLK , or MCGPLLCLK , or IRC48M clock as selected by * SOPT2[PLLFLLSEL], and then divided by the USB fractional divider as configured by * SIM_CLKDIV2[USBFRAC, USBDIV]. */ //@{ #define BP_SIM_SOPT2_USBSRC (18U) //!< Bit position for SIM_SOPT2_USBSRC. #define BM_SIM_SOPT2_USBSRC (0x00040000U) //!< Bit mask for SIM_SOPT2_USBSRC. #define BS_SIM_SOPT2_USBSRC (1U) //!< Bit field size in bits for SIM_SOPT2_USBSRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_USBSRC field. #define BR_SIM_SOPT2_USBSRC (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_USBSRC)) #endif //! @brief Format value for bitfield SIM_SOPT2_USBSRC. #define BF_SIM_SOPT2_USBSRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_USBSRC), uint32_t) & BM_SIM_SOPT2_USBSRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the USBSRC field to a new value. #define BW_SIM_SOPT2_USBSRC(v) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_USBSRC) = (v)) #endif //@} /*! * @name Register SIM_SOPT2, field RMIISRC[19] (RW) * * Selects the clock source for the Ethernet RMII interface * * Values: * - 0 - EXTAL clock * - 1 - External bypass clock (ENET_1588_CLKIN). */ //@{ #define BP_SIM_SOPT2_RMIISRC (19U) //!< Bit position for SIM_SOPT2_RMIISRC. #define BM_SIM_SOPT2_RMIISRC (0x00080000U) //!< Bit mask for SIM_SOPT2_RMIISRC. #define BS_SIM_SOPT2_RMIISRC (1U) //!< Bit field size in bits for SIM_SOPT2_RMIISRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_RMIISRC field. #define BR_SIM_SOPT2_RMIISRC (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_RMIISRC)) #endif //! @brief Format value for bitfield SIM_SOPT2_RMIISRC. #define BF_SIM_SOPT2_RMIISRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_RMIISRC), uint32_t) & BM_SIM_SOPT2_RMIISRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the RMIISRC field to a new value. #define BW_SIM_SOPT2_RMIISRC(v) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR, BP_SIM_SOPT2_RMIISRC) = (v)) #endif //@} /*! * @name Register SIM_SOPT2, field TIMESRC[21:20] (RW) * * Selects the clock source for the Ethernet timestamp clock. * * Values: * - 00 - Core/system clock. * - 01 - MCGFLLCLK , or MCGPLLCLK , or IRC48M clock as selected by * SOPT2[PLLFLLSEL]. * - 10 - OSCERCLK clock * - 11 - External bypass clock (ENET_1588_CLKIN). */ //@{ #define BP_SIM_SOPT2_TIMESRC (20U) //!< Bit position for SIM_SOPT2_TIMESRC. #define BM_SIM_SOPT2_TIMESRC (0x00300000U) //!< Bit mask for SIM_SOPT2_TIMESRC. #define BS_SIM_SOPT2_TIMESRC (2U) //!< Bit field size in bits for SIM_SOPT2_TIMESRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_TIMESRC field. #define BR_SIM_SOPT2_TIMESRC (HW_SIM_SOPT2.B.TIMESRC) #endif //! @brief Format value for bitfield SIM_SOPT2_TIMESRC. #define BF_SIM_SOPT2_TIMESRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_TIMESRC), uint32_t) & BM_SIM_SOPT2_TIMESRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the TIMESRC field to a new value. #define BW_SIM_SOPT2_TIMESRC(v) (HW_SIM_SOPT2_WR((HW_SIM_SOPT2_RD() & ~BM_SIM_SOPT2_TIMESRC) | BF_SIM_SOPT2_TIMESRC(v))) #endif //@} /*! * @name Register SIM_SOPT2, field SDHCSRC[29:28] (RW) * * Selects the clock source for the SDHC clock . * * Values: * - 00 - Core/system clock. * - 01 - MCGFLLCLK, or MCGPLLCLK , or IRC48M clock as selected by * SOPT2[PLLFLLSEL]. * - 10 - OSCERCLK clock * - 11 - External bypass clock (SDHC0_CLKIN) */ //@{ #define BP_SIM_SOPT2_SDHCSRC (28U) //!< Bit position for SIM_SOPT2_SDHCSRC. #define BM_SIM_SOPT2_SDHCSRC (0x30000000U) //!< Bit mask for SIM_SOPT2_SDHCSRC. #define BS_SIM_SOPT2_SDHCSRC (2U) //!< Bit field size in bits for SIM_SOPT2_SDHCSRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT2_SDHCSRC field. #define BR_SIM_SOPT2_SDHCSRC (HW_SIM_SOPT2.B.SDHCSRC) #endif //! @brief Format value for bitfield SIM_SOPT2_SDHCSRC. #define BF_SIM_SOPT2_SDHCSRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT2_SDHCSRC), uint32_t) & BM_SIM_SOPT2_SDHCSRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the SDHCSRC field to a new value. #define BW_SIM_SOPT2_SDHCSRC(v) (HW_SIM_SOPT2_WR((HW_SIM_SOPT2_RD() & ~BM_SIM_SOPT2_SDHCSRC) | BF_SIM_SOPT2_SDHCSRC(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SOPT4 - System Options Register 4 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SOPT4 - System Options Register 4 (RW) * * Reset value: 0x00000000U */ typedef union _hw_sim_sopt4 { uint32_t U; struct _hw_sim_sopt4_bitfields { uint32_t FTM0FLT0 : 1; //!< [0] FTM0 Fault 0 Select uint32_t FTM0FLT1 : 1; //!< [1] FTM0 Fault 1 Select uint32_t FTM0FLT2 : 1; //!< [2] FTM0 Fault 2 Select uint32_t RESERVED0 : 1; //!< [3] uint32_t FTM1FLT0 : 1; //!< [4] FTM1 Fault 0 Select uint32_t RESERVED1 : 3; //!< [7:5] uint32_t FTM2FLT0 : 1; //!< [8] FTM2 Fault 0 Select uint32_t RESERVED2 : 3; //!< [11:9] uint32_t FTM3FLT0 : 1; //!< [12] FTM3 Fault 0 Select uint32_t RESERVED3 : 5; //!< [17:13] uint32_t FTM1CH0SRC : 2; //!< [19:18] FTM1 channel 0 input capture //! source select uint32_t FTM2CH0SRC : 2; //!< [21:20] FTM2 channel 0 input capture //! source select uint32_t RESERVED4 : 2; //!< [23:22] uint32_t FTM0CLKSEL : 1; //!< [24] FlexTimer 0 External Clock Pin //! Select uint32_t FTM1CLKSEL : 1; //!< [25] FTM1 External Clock Pin Select uint32_t FTM2CLKSEL : 1; //!< [26] FlexTimer 2 External Clock Pin //! Select uint32_t FTM3CLKSEL : 1; //!< [27] FlexTimer 3 External Clock Pin //! Select uint32_t FTM0TRG0SRC : 1; //!< [28] FlexTimer 0 Hardware Trigger 0 //! Source Select uint32_t FTM0TRG1SRC : 1; //!< [29] FlexTimer 0 Hardware Trigger 1 //! Source Select uint32_t FTM3TRG0SRC : 1; //!< [30] FlexTimer 3 Hardware Trigger 0 //! Source Select uint32_t FTM3TRG1SRC : 1; //!< [31] FlexTimer 3 Hardware Trigger 1 //! Source Select } B; } hw_sim_sopt4_t; #endif /*! * @name Constants and macros for entire SIM_SOPT4 register */ //@{ #define HW_SIM_SOPT4_ADDR (REGS_SIM_BASE + 0x100CU) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SOPT4 (*(__IO hw_sim_sopt4_t *) HW_SIM_SOPT4_ADDR) #define HW_SIM_SOPT4_RD() (HW_SIM_SOPT4.U) #define HW_SIM_SOPT4_WR(v) (HW_SIM_SOPT4.U = (v)) #define HW_SIM_SOPT4_SET(v) (HW_SIM_SOPT4_WR(HW_SIM_SOPT4_RD() | (v))) #define HW_SIM_SOPT4_CLR(v) (HW_SIM_SOPT4_WR(HW_SIM_SOPT4_RD() & ~(v))) #define HW_SIM_SOPT4_TOG(v) (HW_SIM_SOPT4_WR(HW_SIM_SOPT4_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SOPT4 bitfields */ /*! * @name Register SIM_SOPT4, field FTM0FLT0[0] (RW) * * Selects the source of FTM0 fault 0. The pin source for fault 0 must be * configured for the FTM module fault function through the appropriate pin control * register in the port control module. * * Values: * - 0 - FTM0_FLT0 pin * - 1 - CMP0 out */ //@{ #define BP_SIM_SOPT4_FTM0FLT0 (0U) //!< Bit position for SIM_SOPT4_FTM0FLT0. #define BM_SIM_SOPT4_FTM0FLT0 (0x00000001U) //!< Bit mask for SIM_SOPT4_FTM0FLT0. #define BS_SIM_SOPT4_FTM0FLT0 (1U) //!< Bit field size in bits for SIM_SOPT4_FTM0FLT0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM0FLT0 field. #define BR_SIM_SOPT4_FTM0FLT0 (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0FLT0)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM0FLT0. #define BF_SIM_SOPT4_FTM0FLT0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM0FLT0), uint32_t) & BM_SIM_SOPT4_FTM0FLT0) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM0FLT0 field to a new value. #define BW_SIM_SOPT4_FTM0FLT0(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0FLT0) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM0FLT1[1] (RW) * * Selects the source of FTM0 fault 1. The pin source for fault 1 must be * configured for the FTM module fault function through the appropriate pin control * register in the port control module. * * Values: * - 0 - FTM0_FLT1 pin * - 1 - CMP1 out */ //@{ #define BP_SIM_SOPT4_FTM0FLT1 (1U) //!< Bit position for SIM_SOPT4_FTM0FLT1. #define BM_SIM_SOPT4_FTM0FLT1 (0x00000002U) //!< Bit mask for SIM_SOPT4_FTM0FLT1. #define BS_SIM_SOPT4_FTM0FLT1 (1U) //!< Bit field size in bits for SIM_SOPT4_FTM0FLT1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM0FLT1 field. #define BR_SIM_SOPT4_FTM0FLT1 (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0FLT1)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM0FLT1. #define BF_SIM_SOPT4_FTM0FLT1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM0FLT1), uint32_t) & BM_SIM_SOPT4_FTM0FLT1) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM0FLT1 field to a new value. #define BW_SIM_SOPT4_FTM0FLT1(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0FLT1) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM0FLT2[2] (RW) * * Selects the source of FTM0 fault 2. The pin source for fault 2 must be * configured for the FTM module fault function through the appropriate pin control * register in the port control module. * * Values: * - 0 - FTM0_FLT2 pin * - 1 - CMP2 out */ //@{ #define BP_SIM_SOPT4_FTM0FLT2 (2U) //!< Bit position for SIM_SOPT4_FTM0FLT2. #define BM_SIM_SOPT4_FTM0FLT2 (0x00000004U) //!< Bit mask for SIM_SOPT4_FTM0FLT2. #define BS_SIM_SOPT4_FTM0FLT2 (1U) //!< Bit field size in bits for SIM_SOPT4_FTM0FLT2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM0FLT2 field. #define BR_SIM_SOPT4_FTM0FLT2 (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0FLT2)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM0FLT2. #define BF_SIM_SOPT4_FTM0FLT2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM0FLT2), uint32_t) & BM_SIM_SOPT4_FTM0FLT2) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM0FLT2 field to a new value. #define BW_SIM_SOPT4_FTM0FLT2(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0FLT2) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM1FLT0[4] (RW) * * Selects the source of FTM1 fault 0. The pin source for fault 0 must be * configured for the FTM module fault function through the appropriate pin control * register in the port control module. * * Values: * - 0 - FTM1_FLT0 pin * - 1 - CMP0 out */ //@{ #define BP_SIM_SOPT4_FTM1FLT0 (4U) //!< Bit position for SIM_SOPT4_FTM1FLT0. #define BM_SIM_SOPT4_FTM1FLT0 (0x00000010U) //!< Bit mask for SIM_SOPT4_FTM1FLT0. #define BS_SIM_SOPT4_FTM1FLT0 (1U) //!< Bit field size in bits for SIM_SOPT4_FTM1FLT0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM1FLT0 field. #define BR_SIM_SOPT4_FTM1FLT0 (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM1FLT0)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM1FLT0. #define BF_SIM_SOPT4_FTM1FLT0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM1FLT0), uint32_t) & BM_SIM_SOPT4_FTM1FLT0) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM1FLT0 field to a new value. #define BW_SIM_SOPT4_FTM1FLT0(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM1FLT0) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM2FLT0[8] (RW) * * Selects the source of FTM2 fault 0. The pin source for fault 0 must be * configured for the FTM module fault function through the appropriate PORTx pin * control register. * * Values: * - 0 - FTM2_FLT0 pin * - 1 - CMP0 out */ //@{ #define BP_SIM_SOPT4_FTM2FLT0 (8U) //!< Bit position for SIM_SOPT4_FTM2FLT0. #define BM_SIM_SOPT4_FTM2FLT0 (0x00000100U) //!< Bit mask for SIM_SOPT4_FTM2FLT0. #define BS_SIM_SOPT4_FTM2FLT0 (1U) //!< Bit field size in bits for SIM_SOPT4_FTM2FLT0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM2FLT0 field. #define BR_SIM_SOPT4_FTM2FLT0 (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM2FLT0)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM2FLT0. #define BF_SIM_SOPT4_FTM2FLT0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM2FLT0), uint32_t) & BM_SIM_SOPT4_FTM2FLT0) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM2FLT0 field to a new value. #define BW_SIM_SOPT4_FTM2FLT0(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM2FLT0) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM3FLT0[12] (RW) * * Selects the source of FTM3 fault 0. The pin source for fault 0 must be * configured for the FTM module fault function through the appropriate PORTx pin * control register. * * Values: * - 0 - FTM3_FLT0 pin * - 1 - CMP0 out */ //@{ #define BP_SIM_SOPT4_FTM3FLT0 (12U) //!< Bit position for SIM_SOPT4_FTM3FLT0. #define BM_SIM_SOPT4_FTM3FLT0 (0x00001000U) //!< Bit mask for SIM_SOPT4_FTM3FLT0. #define BS_SIM_SOPT4_FTM3FLT0 (1U) //!< Bit field size in bits for SIM_SOPT4_FTM3FLT0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM3FLT0 field. #define BR_SIM_SOPT4_FTM3FLT0 (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM3FLT0)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM3FLT0. #define BF_SIM_SOPT4_FTM3FLT0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM3FLT0), uint32_t) & BM_SIM_SOPT4_FTM3FLT0) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM3FLT0 field to a new value. #define BW_SIM_SOPT4_FTM3FLT0(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM3FLT0) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM1CH0SRC[19:18] (RW) * * Selects the source for FTM1 channel 0 input capture. When the FTM is not in * input capture mode, clear this field. * * Values: * - 00 - FTM1_CH0 signal * - 01 - CMP0 output * - 10 - CMP1 output * - 11 - USB start of frame pulse */ //@{ #define BP_SIM_SOPT4_FTM1CH0SRC (18U) //!< Bit position for SIM_SOPT4_FTM1CH0SRC. #define BM_SIM_SOPT4_FTM1CH0SRC (0x000C0000U) //!< Bit mask for SIM_SOPT4_FTM1CH0SRC. #define BS_SIM_SOPT4_FTM1CH0SRC (2U) //!< Bit field size in bits for SIM_SOPT4_FTM1CH0SRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM1CH0SRC field. #define BR_SIM_SOPT4_FTM1CH0SRC (HW_SIM_SOPT4.B.FTM1CH0SRC) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM1CH0SRC. #define BF_SIM_SOPT4_FTM1CH0SRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM1CH0SRC), uint32_t) & BM_SIM_SOPT4_FTM1CH0SRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM1CH0SRC field to a new value. #define BW_SIM_SOPT4_FTM1CH0SRC(v) (HW_SIM_SOPT4_WR((HW_SIM_SOPT4_RD() & ~BM_SIM_SOPT4_FTM1CH0SRC) | BF_SIM_SOPT4_FTM1CH0SRC(v))) #endif //@} /*! * @name Register SIM_SOPT4, field FTM2CH0SRC[21:20] (RW) * * Selects the source for FTM2 channel 0 input capture. When the FTM is not in * input capture mode, clear this field. * * Values: * - 00 - FTM2_CH0 signal * - 01 - CMP0 output * - 10 - CMP1 output * - 11 - Reserved */ //@{ #define BP_SIM_SOPT4_FTM2CH0SRC (20U) //!< Bit position for SIM_SOPT4_FTM2CH0SRC. #define BM_SIM_SOPT4_FTM2CH0SRC (0x00300000U) //!< Bit mask for SIM_SOPT4_FTM2CH0SRC. #define BS_SIM_SOPT4_FTM2CH0SRC (2U) //!< Bit field size in bits for SIM_SOPT4_FTM2CH0SRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM2CH0SRC field. #define BR_SIM_SOPT4_FTM2CH0SRC (HW_SIM_SOPT4.B.FTM2CH0SRC) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM2CH0SRC. #define BF_SIM_SOPT4_FTM2CH0SRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM2CH0SRC), uint32_t) & BM_SIM_SOPT4_FTM2CH0SRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM2CH0SRC field to a new value. #define BW_SIM_SOPT4_FTM2CH0SRC(v) (HW_SIM_SOPT4_WR((HW_SIM_SOPT4_RD() & ~BM_SIM_SOPT4_FTM2CH0SRC) | BF_SIM_SOPT4_FTM2CH0SRC(v))) #endif //@} /*! * @name Register SIM_SOPT4, field FTM0CLKSEL[24] (RW) * * Selects the external pin used to drive the clock to the FTM0 module. The * selected pin must also be configured for the FTM external clock function through * the appropriate pin control register in the port control module. * * Values: * - 0 - FTM_CLK0 pin * - 1 - FTM_CLK1 pin */ //@{ #define BP_SIM_SOPT4_FTM0CLKSEL (24U) //!< Bit position for SIM_SOPT4_FTM0CLKSEL. #define BM_SIM_SOPT4_FTM0CLKSEL (0x01000000U) //!< Bit mask for SIM_SOPT4_FTM0CLKSEL. #define BS_SIM_SOPT4_FTM0CLKSEL (1U) //!< Bit field size in bits for SIM_SOPT4_FTM0CLKSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM0CLKSEL field. #define BR_SIM_SOPT4_FTM0CLKSEL (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0CLKSEL)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM0CLKSEL. #define BF_SIM_SOPT4_FTM0CLKSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM0CLKSEL), uint32_t) & BM_SIM_SOPT4_FTM0CLKSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM0CLKSEL field to a new value. #define BW_SIM_SOPT4_FTM0CLKSEL(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0CLKSEL) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM1CLKSEL[25] (RW) * * Selects the external pin used to drive the clock to the FTM1 module. The * selected pin must also be configured for the FTM external clock function through * the appropriate pin control register in the port control module. * * Values: * - 0 - FTM_CLK0 pin * - 1 - FTM_CLK1 pin */ //@{ #define BP_SIM_SOPT4_FTM1CLKSEL (25U) //!< Bit position for SIM_SOPT4_FTM1CLKSEL. #define BM_SIM_SOPT4_FTM1CLKSEL (0x02000000U) //!< Bit mask for SIM_SOPT4_FTM1CLKSEL. #define BS_SIM_SOPT4_FTM1CLKSEL (1U) //!< Bit field size in bits for SIM_SOPT4_FTM1CLKSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM1CLKSEL field. #define BR_SIM_SOPT4_FTM1CLKSEL (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM1CLKSEL)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM1CLKSEL. #define BF_SIM_SOPT4_FTM1CLKSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM1CLKSEL), uint32_t) & BM_SIM_SOPT4_FTM1CLKSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM1CLKSEL field to a new value. #define BW_SIM_SOPT4_FTM1CLKSEL(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM1CLKSEL) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM2CLKSEL[26] (RW) * * Selects the external pin used to drive the clock to the FTM2 module. The * selected pin must also be configured for the FTM2 module external clock function * through the appropriate pin control register in the port control module. * * Values: * - 0 - FTM2 external clock driven by FTM_CLK0 pin. * - 1 - FTM2 external clock driven by FTM_CLK1 pin. */ //@{ #define BP_SIM_SOPT4_FTM2CLKSEL (26U) //!< Bit position for SIM_SOPT4_FTM2CLKSEL. #define BM_SIM_SOPT4_FTM2CLKSEL (0x04000000U) //!< Bit mask for SIM_SOPT4_FTM2CLKSEL. #define BS_SIM_SOPT4_FTM2CLKSEL (1U) //!< Bit field size in bits for SIM_SOPT4_FTM2CLKSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM2CLKSEL field. #define BR_SIM_SOPT4_FTM2CLKSEL (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM2CLKSEL)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM2CLKSEL. #define BF_SIM_SOPT4_FTM2CLKSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM2CLKSEL), uint32_t) & BM_SIM_SOPT4_FTM2CLKSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM2CLKSEL field to a new value. #define BW_SIM_SOPT4_FTM2CLKSEL(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM2CLKSEL) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM3CLKSEL[27] (RW) * * Selects the external pin used to drive the clock to the FTM3 module. The * selected pin must also be configured for the FTM3 module external clock function * through the appropriate pin control register in the port control module. * * Values: * - 0 - FTM3 external clock driven by FTM_CLK0 pin. * - 1 - FTM3 external clock driven by FTM_CLK1 pin. */ //@{ #define BP_SIM_SOPT4_FTM3CLKSEL (27U) //!< Bit position for SIM_SOPT4_FTM3CLKSEL. #define BM_SIM_SOPT4_FTM3CLKSEL (0x08000000U) //!< Bit mask for SIM_SOPT4_FTM3CLKSEL. #define BS_SIM_SOPT4_FTM3CLKSEL (1U) //!< Bit field size in bits for SIM_SOPT4_FTM3CLKSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM3CLKSEL field. #define BR_SIM_SOPT4_FTM3CLKSEL (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM3CLKSEL)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM3CLKSEL. #define BF_SIM_SOPT4_FTM3CLKSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM3CLKSEL), uint32_t) & BM_SIM_SOPT4_FTM3CLKSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM3CLKSEL field to a new value. #define BW_SIM_SOPT4_FTM3CLKSEL(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM3CLKSEL) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM0TRG0SRC[28] (RW) * * Selects the source of FTM0 hardware trigger 0. * * Values: * - 0 - HSCMP0 output drives FTM0 hardware trigger 0 * - 1 - FTM1 channel match drives FTM0 hardware trigger 0 */ //@{ #define BP_SIM_SOPT4_FTM0TRG0SRC (28U) //!< Bit position for SIM_SOPT4_FTM0TRG0SRC. #define BM_SIM_SOPT4_FTM0TRG0SRC (0x10000000U) //!< Bit mask for SIM_SOPT4_FTM0TRG0SRC. #define BS_SIM_SOPT4_FTM0TRG0SRC (1U) //!< Bit field size in bits for SIM_SOPT4_FTM0TRG0SRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM0TRG0SRC field. #define BR_SIM_SOPT4_FTM0TRG0SRC (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0TRG0SRC)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM0TRG0SRC. #define BF_SIM_SOPT4_FTM0TRG0SRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM0TRG0SRC), uint32_t) & BM_SIM_SOPT4_FTM0TRG0SRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM0TRG0SRC field to a new value. #define BW_SIM_SOPT4_FTM0TRG0SRC(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0TRG0SRC) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM0TRG1SRC[29] (RW) * * Selects the source of FTM0 hardware trigger 1. * * Values: * - 0 - PDB output trigger 1 drives FTM0 hardware trigger 1 * - 1 - FTM2 channel match drives FTM0 hardware trigger 1 */ //@{ #define BP_SIM_SOPT4_FTM0TRG1SRC (29U) //!< Bit position for SIM_SOPT4_FTM0TRG1SRC. #define BM_SIM_SOPT4_FTM0TRG1SRC (0x20000000U) //!< Bit mask for SIM_SOPT4_FTM0TRG1SRC. #define BS_SIM_SOPT4_FTM0TRG1SRC (1U) //!< Bit field size in bits for SIM_SOPT4_FTM0TRG1SRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM0TRG1SRC field. #define BR_SIM_SOPT4_FTM0TRG1SRC (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0TRG1SRC)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM0TRG1SRC. #define BF_SIM_SOPT4_FTM0TRG1SRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM0TRG1SRC), uint32_t) & BM_SIM_SOPT4_FTM0TRG1SRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM0TRG1SRC field to a new value. #define BW_SIM_SOPT4_FTM0TRG1SRC(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM0TRG1SRC) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM3TRG0SRC[30] (RW) * * Selects the source of FTM3 hardware trigger 0. * * Values: * - 0 - Reserved * - 1 - FTM1 channel match drives FTM3 hardware trigger 0 */ //@{ #define BP_SIM_SOPT4_FTM3TRG0SRC (30U) //!< Bit position for SIM_SOPT4_FTM3TRG0SRC. #define BM_SIM_SOPT4_FTM3TRG0SRC (0x40000000U) //!< Bit mask for SIM_SOPT4_FTM3TRG0SRC. #define BS_SIM_SOPT4_FTM3TRG0SRC (1U) //!< Bit field size in bits for SIM_SOPT4_FTM3TRG0SRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM3TRG0SRC field. #define BR_SIM_SOPT4_FTM3TRG0SRC (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM3TRG0SRC)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM3TRG0SRC. #define BF_SIM_SOPT4_FTM3TRG0SRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM3TRG0SRC), uint32_t) & BM_SIM_SOPT4_FTM3TRG0SRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM3TRG0SRC field to a new value. #define BW_SIM_SOPT4_FTM3TRG0SRC(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM3TRG0SRC) = (v)) #endif //@} /*! * @name Register SIM_SOPT4, field FTM3TRG1SRC[31] (RW) * * Selects the source of FTM3 hardware trigger 1. * * Values: * - 0 - Reserved * - 1 - FTM2 channel match drives FTM3 hardware trigger 1 */ //@{ #define BP_SIM_SOPT4_FTM3TRG1SRC (31U) //!< Bit position for SIM_SOPT4_FTM3TRG1SRC. #define BM_SIM_SOPT4_FTM3TRG1SRC (0x80000000U) //!< Bit mask for SIM_SOPT4_FTM3TRG1SRC. #define BS_SIM_SOPT4_FTM3TRG1SRC (1U) //!< Bit field size in bits for SIM_SOPT4_FTM3TRG1SRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT4_FTM3TRG1SRC field. #define BR_SIM_SOPT4_FTM3TRG1SRC (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM3TRG1SRC)) #endif //! @brief Format value for bitfield SIM_SOPT4_FTM3TRG1SRC. #define BF_SIM_SOPT4_FTM3TRG1SRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT4_FTM3TRG1SRC), uint32_t) & BM_SIM_SOPT4_FTM3TRG1SRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM3TRG1SRC field to a new value. #define BW_SIM_SOPT4_FTM3TRG1SRC(v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR, BP_SIM_SOPT4_FTM3TRG1SRC) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SOPT5 - System Options Register 5 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SOPT5 - System Options Register 5 (RW) * * Reset value: 0x00000000U */ typedef union _hw_sim_sopt5 { uint32_t U; struct _hw_sim_sopt5_bitfields { uint32_t UART0TXSRC : 2; //!< [1:0] UART 0 transmit data source select uint32_t UART0RXSRC : 2; //!< [3:2] UART 0 receive data source select uint32_t UART1TXSRC : 2; //!< [5:4] UART 1 transmit data source select uint32_t UART1RXSRC : 2; //!< [7:6] UART 1 receive data source select uint32_t RESERVED0 : 24; //!< [31:8] } B; } hw_sim_sopt5_t; #endif /*! * @name Constants and macros for entire SIM_SOPT5 register */ //@{ #define HW_SIM_SOPT5_ADDR (REGS_SIM_BASE + 0x1010U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SOPT5 (*(__IO hw_sim_sopt5_t *) HW_SIM_SOPT5_ADDR) #define HW_SIM_SOPT5_RD() (HW_SIM_SOPT5.U) #define HW_SIM_SOPT5_WR(v) (HW_SIM_SOPT5.U = (v)) #define HW_SIM_SOPT5_SET(v) (HW_SIM_SOPT5_WR(HW_SIM_SOPT5_RD() | (v))) #define HW_SIM_SOPT5_CLR(v) (HW_SIM_SOPT5_WR(HW_SIM_SOPT5_RD() & ~(v))) #define HW_SIM_SOPT5_TOG(v) (HW_SIM_SOPT5_WR(HW_SIM_SOPT5_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SOPT5 bitfields */ /*! * @name Register SIM_SOPT5, field UART0TXSRC[1:0] (RW) * * Selects the source for the UART 0 transmit data. * * Values: * - 00 - UART0_TX pin * - 01 - UART0_TX pin modulated with FTM1 channel 0 output * - 10 - UART0_TX pin modulated with FTM2 channel 0 output * - 11 - Reserved */ //@{ #define BP_SIM_SOPT5_UART0TXSRC (0U) //!< Bit position for SIM_SOPT5_UART0TXSRC. #define BM_SIM_SOPT5_UART0TXSRC (0x00000003U) //!< Bit mask for SIM_SOPT5_UART0TXSRC. #define BS_SIM_SOPT5_UART0TXSRC (2U) //!< Bit field size in bits for SIM_SOPT5_UART0TXSRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT5_UART0TXSRC field. #define BR_SIM_SOPT5_UART0TXSRC (HW_SIM_SOPT5.B.UART0TXSRC) #endif //! @brief Format value for bitfield SIM_SOPT5_UART0TXSRC. #define BF_SIM_SOPT5_UART0TXSRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT5_UART0TXSRC), uint32_t) & BM_SIM_SOPT5_UART0TXSRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART0TXSRC field to a new value. #define BW_SIM_SOPT5_UART0TXSRC(v) (HW_SIM_SOPT5_WR((HW_SIM_SOPT5_RD() & ~BM_SIM_SOPT5_UART0TXSRC) | BF_SIM_SOPT5_UART0TXSRC(v))) #endif //@} /*! * @name Register SIM_SOPT5, field UART0RXSRC[3:2] (RW) * * Selects the source for the UART 0 receive data. * * Values: * - 00 - UART0_RX pin * - 01 - CMP0 * - 10 - CMP1 * - 11 - Reserved */ //@{ #define BP_SIM_SOPT5_UART0RXSRC (2U) //!< Bit position for SIM_SOPT5_UART0RXSRC. #define BM_SIM_SOPT5_UART0RXSRC (0x0000000CU) //!< Bit mask for SIM_SOPT5_UART0RXSRC. #define BS_SIM_SOPT5_UART0RXSRC (2U) //!< Bit field size in bits for SIM_SOPT5_UART0RXSRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT5_UART0RXSRC field. #define BR_SIM_SOPT5_UART0RXSRC (HW_SIM_SOPT5.B.UART0RXSRC) #endif //! @brief Format value for bitfield SIM_SOPT5_UART0RXSRC. #define BF_SIM_SOPT5_UART0RXSRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT5_UART0RXSRC), uint32_t) & BM_SIM_SOPT5_UART0RXSRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART0RXSRC field to a new value. #define BW_SIM_SOPT5_UART0RXSRC(v) (HW_SIM_SOPT5_WR((HW_SIM_SOPT5_RD() & ~BM_SIM_SOPT5_UART0RXSRC) | BF_SIM_SOPT5_UART0RXSRC(v))) #endif //@} /*! * @name Register SIM_SOPT5, field UART1TXSRC[5:4] (RW) * * Selects the source for the UART 1 transmit data. * * Values: * - 00 - UART1_TX pin * - 01 - UART1_TX pin modulated with FTM1 channel 0 output * - 10 - UART1_TX pin modulated with FTM2 channel 0 output * - 11 - Reserved */ //@{ #define BP_SIM_SOPT5_UART1TXSRC (4U) //!< Bit position for SIM_SOPT5_UART1TXSRC. #define BM_SIM_SOPT5_UART1TXSRC (0x00000030U) //!< Bit mask for SIM_SOPT5_UART1TXSRC. #define BS_SIM_SOPT5_UART1TXSRC (2U) //!< Bit field size in bits for SIM_SOPT5_UART1TXSRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT5_UART1TXSRC field. #define BR_SIM_SOPT5_UART1TXSRC (HW_SIM_SOPT5.B.UART1TXSRC) #endif //! @brief Format value for bitfield SIM_SOPT5_UART1TXSRC. #define BF_SIM_SOPT5_UART1TXSRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT5_UART1TXSRC), uint32_t) & BM_SIM_SOPT5_UART1TXSRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART1TXSRC field to a new value. #define BW_SIM_SOPT5_UART1TXSRC(v) (HW_SIM_SOPT5_WR((HW_SIM_SOPT5_RD() & ~BM_SIM_SOPT5_UART1TXSRC) | BF_SIM_SOPT5_UART1TXSRC(v))) #endif //@} /*! * @name Register SIM_SOPT5, field UART1RXSRC[7:6] (RW) * * Selects the source for the UART 1 receive data. * * Values: * - 00 - UART1_RX pin * - 01 - CMP0 * - 10 - CMP1 * - 11 - Reserved */ //@{ #define BP_SIM_SOPT5_UART1RXSRC (6U) //!< Bit position for SIM_SOPT5_UART1RXSRC. #define BM_SIM_SOPT5_UART1RXSRC (0x000000C0U) //!< Bit mask for SIM_SOPT5_UART1RXSRC. #define BS_SIM_SOPT5_UART1RXSRC (2U) //!< Bit field size in bits for SIM_SOPT5_UART1RXSRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT5_UART1RXSRC field. #define BR_SIM_SOPT5_UART1RXSRC (HW_SIM_SOPT5.B.UART1RXSRC) #endif //! @brief Format value for bitfield SIM_SOPT5_UART1RXSRC. #define BF_SIM_SOPT5_UART1RXSRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT5_UART1RXSRC), uint32_t) & BM_SIM_SOPT5_UART1RXSRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART1RXSRC field to a new value. #define BW_SIM_SOPT5_UART1RXSRC(v) (HW_SIM_SOPT5_WR((HW_SIM_SOPT5_RD() & ~BM_SIM_SOPT5_UART1RXSRC) | BF_SIM_SOPT5_UART1RXSRC(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SOPT7 - System Options Register 7 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SOPT7 - System Options Register 7 (RW) * * Reset value: 0x00000000U */ typedef union _hw_sim_sopt7 { uint32_t U; struct _hw_sim_sopt7_bitfields { uint32_t ADC0TRGSEL : 4; //!< [3:0] ADC0 trigger select uint32_t ADC0PRETRGSEL : 1; //!< [4] ADC0 pretrigger select uint32_t RESERVED0 : 2; //!< [6:5] uint32_t ADC0ALTTRGEN : 1; //!< [7] ADC0 alternate trigger enable uint32_t ADC1TRGSEL : 4; //!< [11:8] ADC1 trigger select uint32_t ADC1PRETRGSEL : 1; //!< [12] ADC1 pre-trigger select uint32_t RESERVED1 : 2; //!< [14:13] uint32_t ADC1ALTTRGEN : 1; //!< [15] ADC1 alternate trigger enable uint32_t RESERVED2 : 16; //!< [31:16] } B; } hw_sim_sopt7_t; #endif /*! * @name Constants and macros for entire SIM_SOPT7 register */ //@{ #define HW_SIM_SOPT7_ADDR (REGS_SIM_BASE + 0x1018U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SOPT7 (*(__IO hw_sim_sopt7_t *) HW_SIM_SOPT7_ADDR) #define HW_SIM_SOPT7_RD() (HW_SIM_SOPT7.U) #define HW_SIM_SOPT7_WR(v) (HW_SIM_SOPT7.U = (v)) #define HW_SIM_SOPT7_SET(v) (HW_SIM_SOPT7_WR(HW_SIM_SOPT7_RD() | (v))) #define HW_SIM_SOPT7_CLR(v) (HW_SIM_SOPT7_WR(HW_SIM_SOPT7_RD() & ~(v))) #define HW_SIM_SOPT7_TOG(v) (HW_SIM_SOPT7_WR(HW_SIM_SOPT7_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SOPT7 bitfields */ /*! * @name Register SIM_SOPT7, field ADC0TRGSEL[3:0] (RW) * * Selects the ADC0 trigger source when alternative triggers are functional in * stop and VLPS modes. . * * Values: * - 0000 - PDB external trigger pin input (PDB0_EXTRG) * - 0001 - High speed comparator 0 output * - 0010 - High speed comparator 1 output * - 0011 - High speed comparator 2 output * - 0100 - PIT trigger 0 * - 0101 - PIT trigger 1 * - 0110 - PIT trigger 2 * - 0111 - PIT trigger 3 * - 1000 - FTM0 trigger * - 1001 - FTM1 trigger * - 1010 - FTM2 trigger * - 1011 - FTM3 trigger * - 1100 - RTC alarm * - 1101 - RTC seconds * - 1110 - Low-power timer (LPTMR) trigger * - 1111 - Reserved */ //@{ #define BP_SIM_SOPT7_ADC0TRGSEL (0U) //!< Bit position for SIM_SOPT7_ADC0TRGSEL. #define BM_SIM_SOPT7_ADC0TRGSEL (0x0000000FU) //!< Bit mask for SIM_SOPT7_ADC0TRGSEL. #define BS_SIM_SOPT7_ADC0TRGSEL (4U) //!< Bit field size in bits for SIM_SOPT7_ADC0TRGSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT7_ADC0TRGSEL field. #define BR_SIM_SOPT7_ADC0TRGSEL (HW_SIM_SOPT7.B.ADC0TRGSEL) #endif //! @brief Format value for bitfield SIM_SOPT7_ADC0TRGSEL. #define BF_SIM_SOPT7_ADC0TRGSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT7_ADC0TRGSEL), uint32_t) & BM_SIM_SOPT7_ADC0TRGSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the ADC0TRGSEL field to a new value. #define BW_SIM_SOPT7_ADC0TRGSEL(v) (HW_SIM_SOPT7_WR((HW_SIM_SOPT7_RD() & ~BM_SIM_SOPT7_ADC0TRGSEL) | BF_SIM_SOPT7_ADC0TRGSEL(v))) #endif //@} /*! * @name Register SIM_SOPT7, field ADC0PRETRGSEL[4] (RW) * * Selects the ADC0 pre-trigger source when alternative triggers are enabled * through ADC0ALTTRGEN. * * Values: * - 0 - Pre-trigger A * - 1 - Pre-trigger B */ //@{ #define BP_SIM_SOPT7_ADC0PRETRGSEL (4U) //!< Bit position for SIM_SOPT7_ADC0PRETRGSEL. #define BM_SIM_SOPT7_ADC0PRETRGSEL (0x00000010U) //!< Bit mask for SIM_SOPT7_ADC0PRETRGSEL. #define BS_SIM_SOPT7_ADC0PRETRGSEL (1U) //!< Bit field size in bits for SIM_SOPT7_ADC0PRETRGSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT7_ADC0PRETRGSEL field. #define BR_SIM_SOPT7_ADC0PRETRGSEL (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR, BP_SIM_SOPT7_ADC0PRETRGSEL)) #endif //! @brief Format value for bitfield SIM_SOPT7_ADC0PRETRGSEL. #define BF_SIM_SOPT7_ADC0PRETRGSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT7_ADC0PRETRGSEL), uint32_t) & BM_SIM_SOPT7_ADC0PRETRGSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the ADC0PRETRGSEL field to a new value. #define BW_SIM_SOPT7_ADC0PRETRGSEL(v) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR, BP_SIM_SOPT7_ADC0PRETRGSEL) = (v)) #endif //@} /*! * @name Register SIM_SOPT7, field ADC0ALTTRGEN[7] (RW) * * Enable alternative conversion triggers for ADC0. * * Values: * - 0 - PDB trigger selected for ADC0. * - 1 - Alternate trigger selected for ADC0. */ //@{ #define BP_SIM_SOPT7_ADC0ALTTRGEN (7U) //!< Bit position for SIM_SOPT7_ADC0ALTTRGEN. #define BM_SIM_SOPT7_ADC0ALTTRGEN (0x00000080U) //!< Bit mask for SIM_SOPT7_ADC0ALTTRGEN. #define BS_SIM_SOPT7_ADC0ALTTRGEN (1U) //!< Bit field size in bits for SIM_SOPT7_ADC0ALTTRGEN. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT7_ADC0ALTTRGEN field. #define BR_SIM_SOPT7_ADC0ALTTRGEN (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR, BP_SIM_SOPT7_ADC0ALTTRGEN)) #endif //! @brief Format value for bitfield SIM_SOPT7_ADC0ALTTRGEN. #define BF_SIM_SOPT7_ADC0ALTTRGEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT7_ADC0ALTTRGEN), uint32_t) & BM_SIM_SOPT7_ADC0ALTTRGEN) #ifndef __LANGUAGE_ASM__ //! @brief Set the ADC0ALTTRGEN field to a new value. #define BW_SIM_SOPT7_ADC0ALTTRGEN(v) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR, BP_SIM_SOPT7_ADC0ALTTRGEN) = (v)) #endif //@} /*! * @name Register SIM_SOPT7, field ADC1TRGSEL[11:8] (RW) * * Selects the ADC1 trigger source when alternative triggers are functional in * stop and VLPS modes. * * Values: * - 0000 - PDB external trigger pin input (PDB0_EXTRG) * - 0001 - High speed comparator 0 output * - 0010 - High speed comparator 1 output * - 0011 - High speed comparator 2 output * - 0100 - PIT trigger 0 * - 0101 - PIT trigger 1 * - 0110 - PIT trigger 2 * - 0111 - PIT trigger 3 * - 1000 - FTM0 trigger * - 1001 - FTM1 trigger * - 1010 - FTM2 trigger * - 1011 - FTM3 trigger * - 1100 - RTC alarm * - 1101 - RTC seconds * - 1110 - Low-power timer (LPTMR) trigger * - 1111 - Reserved */ //@{ #define BP_SIM_SOPT7_ADC1TRGSEL (8U) //!< Bit position for SIM_SOPT7_ADC1TRGSEL. #define BM_SIM_SOPT7_ADC1TRGSEL (0x00000F00U) //!< Bit mask for SIM_SOPT7_ADC1TRGSEL. #define BS_SIM_SOPT7_ADC1TRGSEL (4U) //!< Bit field size in bits for SIM_SOPT7_ADC1TRGSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT7_ADC1TRGSEL field. #define BR_SIM_SOPT7_ADC1TRGSEL (HW_SIM_SOPT7.B.ADC1TRGSEL) #endif //! @brief Format value for bitfield SIM_SOPT7_ADC1TRGSEL. #define BF_SIM_SOPT7_ADC1TRGSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT7_ADC1TRGSEL), uint32_t) & BM_SIM_SOPT7_ADC1TRGSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the ADC1TRGSEL field to a new value. #define BW_SIM_SOPT7_ADC1TRGSEL(v) (HW_SIM_SOPT7_WR((HW_SIM_SOPT7_RD() & ~BM_SIM_SOPT7_ADC1TRGSEL) | BF_SIM_SOPT7_ADC1TRGSEL(v))) #endif //@} /*! * @name Register SIM_SOPT7, field ADC1PRETRGSEL[12] (RW) * * Selects the ADC1 pre-trigger source when alternative triggers are enabled * through ADC1ALTTRGEN. * * Values: * - 0 - Pre-trigger A selected for ADC1. * - 1 - Pre-trigger B selected for ADC1. */ //@{ #define BP_SIM_SOPT7_ADC1PRETRGSEL (12U) //!< Bit position for SIM_SOPT7_ADC1PRETRGSEL. #define BM_SIM_SOPT7_ADC1PRETRGSEL (0x00001000U) //!< Bit mask for SIM_SOPT7_ADC1PRETRGSEL. #define BS_SIM_SOPT7_ADC1PRETRGSEL (1U) //!< Bit field size in bits for SIM_SOPT7_ADC1PRETRGSEL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT7_ADC1PRETRGSEL field. #define BR_SIM_SOPT7_ADC1PRETRGSEL (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR, BP_SIM_SOPT7_ADC1PRETRGSEL)) #endif //! @brief Format value for bitfield SIM_SOPT7_ADC1PRETRGSEL. #define BF_SIM_SOPT7_ADC1PRETRGSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT7_ADC1PRETRGSEL), uint32_t) & BM_SIM_SOPT7_ADC1PRETRGSEL) #ifndef __LANGUAGE_ASM__ //! @brief Set the ADC1PRETRGSEL field to a new value. #define BW_SIM_SOPT7_ADC1PRETRGSEL(v) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR, BP_SIM_SOPT7_ADC1PRETRGSEL) = (v)) #endif //@} /*! * @name Register SIM_SOPT7, field ADC1ALTTRGEN[15] (RW) * * Enable alternative conversion triggers for ADC1. * * Values: * - 0 - PDB trigger selected for ADC1 * - 1 - Alternate trigger selected for ADC1 as defined by ADC1TRGSEL. */ //@{ #define BP_SIM_SOPT7_ADC1ALTTRGEN (15U) //!< Bit position for SIM_SOPT7_ADC1ALTTRGEN. #define BM_SIM_SOPT7_ADC1ALTTRGEN (0x00008000U) //!< Bit mask for SIM_SOPT7_ADC1ALTTRGEN. #define BS_SIM_SOPT7_ADC1ALTTRGEN (1U) //!< Bit field size in bits for SIM_SOPT7_ADC1ALTTRGEN. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SOPT7_ADC1ALTTRGEN field. #define BR_SIM_SOPT7_ADC1ALTTRGEN (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR, BP_SIM_SOPT7_ADC1ALTTRGEN)) #endif //! @brief Format value for bitfield SIM_SOPT7_ADC1ALTTRGEN. #define BF_SIM_SOPT7_ADC1ALTTRGEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SOPT7_ADC1ALTTRGEN), uint32_t) & BM_SIM_SOPT7_ADC1ALTTRGEN) #ifndef __LANGUAGE_ASM__ //! @brief Set the ADC1ALTTRGEN field to a new value. #define BW_SIM_SOPT7_ADC1ALTTRGEN(v) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR, BP_SIM_SOPT7_ADC1ALTTRGEN) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SDID - System Device Identification Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SDID - System Device Identification Register (RO) * * Reset value: 0x00000380U */ typedef union _hw_sim_sdid { uint32_t U; struct _hw_sim_sdid_bitfields { uint32_t PINID : 4; //!< [3:0] Pincount identification uint32_t FAMID : 3; //!< [6:4] Kinetis family identification uint32_t DIEID : 5; //!< [11:7] Device Die ID uint32_t REVID : 4; //!< [15:12] Device revision number uint32_t RESERVED0 : 4; //!< [19:16] uint32_t SERIESID : 4; //!< [23:20] Kinetis Series ID uint32_t SUBFAMID : 4; //!< [27:24] Kinetis Sub-Family ID uint32_t FAMILYID : 4; //!< [31:28] Kinetis Family ID } B; } hw_sim_sdid_t; #endif /*! * @name Constants and macros for entire SIM_SDID register */ //@{ #define HW_SIM_SDID_ADDR (REGS_SIM_BASE + 0x1024U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SDID (*(__I hw_sim_sdid_t *) HW_SIM_SDID_ADDR) #define HW_SIM_SDID_RD() (HW_SIM_SDID.U) #endif //@} /* * Constants & macros for individual SIM_SDID bitfields */ /*! * @name Register SIM_SDID, field PINID[3:0] (RO) * * Specifies the pincount of the device. * * Values: * - 0000 - Reserved * - 0001 - Reserved * - 0010 - 32-pin * - 0011 - Reserved * - 0100 - 48-pin * - 0101 - 64-pin * - 0110 - 80-pin * - 0111 - 81-pin or 121-pin * - 1000 - 100-pin * - 1001 - 121-pin * - 1010 - 144-pin * - 1011 - Custom pinout (WLCSP) * - 1100 - 169-pin * - 1101 - Reserved * - 1110 - 256-pin * - 1111 - Reserved */ //@{ #define BP_SIM_SDID_PINID (0U) //!< Bit position for SIM_SDID_PINID. #define BM_SIM_SDID_PINID (0x0000000FU) //!< Bit mask for SIM_SDID_PINID. #define BS_SIM_SDID_PINID (4U) //!< Bit field size in bits for SIM_SDID_PINID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SDID_PINID field. #define BR_SIM_SDID_PINID (HW_SIM_SDID.B.PINID) #endif //@} /*! * @name Register SIM_SDID, field FAMID[6:4] (RO) * * This field is maintained for compatibility only, but has been superceded by * the SERIESID, FAMILYID and SUBFAMID fields in this register. * * Values: * - 000 - K1x Family (without tamper) * - 001 - K2x Family (without tamper) * - 010 - K3x Family or K1x/K6x Family (with tamper) * - 011 - K4x Family or K2x Family (with tamper) * - 100 - K6x Family (without tamper) * - 101 - K7x Family * - 110 - Reserved * - 111 - Reserved */ //@{ #define BP_SIM_SDID_FAMID (4U) //!< Bit position for SIM_SDID_FAMID. #define BM_SIM_SDID_FAMID (0x00000070U) //!< Bit mask for SIM_SDID_FAMID. #define BS_SIM_SDID_FAMID (3U) //!< Bit field size in bits for SIM_SDID_FAMID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SDID_FAMID field. #define BR_SIM_SDID_FAMID (HW_SIM_SDID.B.FAMID) #endif //@} /*! * @name Register SIM_SDID, field DIEID[11:7] (RO) * * Specifies the silicon feature set identication number for the device. */ //@{ #define BP_SIM_SDID_DIEID (7U) //!< Bit position for SIM_SDID_DIEID. #define BM_SIM_SDID_DIEID (0x00000F80U) //!< Bit mask for SIM_SDID_DIEID. #define BS_SIM_SDID_DIEID (5U) //!< Bit field size in bits for SIM_SDID_DIEID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SDID_DIEID field. #define BR_SIM_SDID_DIEID (HW_SIM_SDID.B.DIEID) #endif //@} /*! * @name Register SIM_SDID, field REVID[15:12] (RO) * * Specifies the silicon implementation number for the device. */ //@{ #define BP_SIM_SDID_REVID (12U) //!< Bit position for SIM_SDID_REVID. #define BM_SIM_SDID_REVID (0x0000F000U) //!< Bit mask for SIM_SDID_REVID. #define BS_SIM_SDID_REVID (4U) //!< Bit field size in bits for SIM_SDID_REVID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SDID_REVID field. #define BR_SIM_SDID_REVID (HW_SIM_SDID.B.REVID) #endif //@} /*! * @name Register SIM_SDID, field SERIESID[23:20] (RO) * * Specifies the Kinetis series of the device. * * Values: * - 0000 - Kinetis K series * - 0001 - Kinetis L series * - 0101 - Kinetis W series * - 0110 - Kinetis V series */ //@{ #define BP_SIM_SDID_SERIESID (20U) //!< Bit position for SIM_SDID_SERIESID. #define BM_SIM_SDID_SERIESID (0x00F00000U) //!< Bit mask for SIM_SDID_SERIESID. #define BS_SIM_SDID_SERIESID (4U) //!< Bit field size in bits for SIM_SDID_SERIESID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SDID_SERIESID field. #define BR_SIM_SDID_SERIESID (HW_SIM_SDID.B.SERIESID) #endif //@} /*! * @name Register SIM_SDID, field SUBFAMID[27:24] (RO) * * Specifies the Kinetis sub-family of the device. * * Values: * - 0000 - Kx0 Subfamily * - 0001 - Kx1 Subfamily (tamper detect) * - 0010 - Kx2 Subfamily * - 0011 - Kx3 Subfamily (tamper detect) * - 0100 - Kx4 Subfamily * - 0101 - Kx5 Subfamily (tamper detect) * - 0110 - Kx6 Subfamily */ //@{ #define BP_SIM_SDID_SUBFAMID (24U) //!< Bit position for SIM_SDID_SUBFAMID. #define BM_SIM_SDID_SUBFAMID (0x0F000000U) //!< Bit mask for SIM_SDID_SUBFAMID. #define BS_SIM_SDID_SUBFAMID (4U) //!< Bit field size in bits for SIM_SDID_SUBFAMID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SDID_SUBFAMID field. #define BR_SIM_SDID_SUBFAMID (HW_SIM_SDID.B.SUBFAMID) #endif //@} /*! * @name Register SIM_SDID, field FAMILYID[31:28] (RO) * * Specifies the Kinetis family of the device. * * Values: * - 0001 - K1x Family * - 0010 - K2x Family * - 0011 - K3x Family * - 0100 - K4x Family * - 0110 - K6x Family * - 0111 - K7x Family */ //@{ #define BP_SIM_SDID_FAMILYID (28U) //!< Bit position for SIM_SDID_FAMILYID. #define BM_SIM_SDID_FAMILYID (0xF0000000U) //!< Bit mask for SIM_SDID_FAMILYID. #define BS_SIM_SDID_FAMILYID (4U) //!< Bit field size in bits for SIM_SDID_FAMILYID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SDID_FAMILYID field. #define BR_SIM_SDID_FAMILYID (HW_SIM_SDID.B.FAMILYID) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SCGC1 - System Clock Gating Control Register 1 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SCGC1 - System Clock Gating Control Register 1 (RW) * * Reset value: 0x00000000U */ typedef union _hw_sim_scgc1 { uint32_t U; struct _hw_sim_scgc1_bitfields { uint32_t RESERVED0 : 6; //!< [5:0] uint32_t I2C2b : 1; //!< [6] I2C2 Clock Gate Control uint32_t RESERVED1 : 3; //!< [9:7] uint32_t UART4b : 1; //!< [10] UART4 Clock Gate Control uint32_t UART5b : 1; //!< [11] UART5 Clock Gate Control uint32_t RESERVED2 : 20; //!< [31:12] } B; } hw_sim_scgc1_t; #endif /*! * @name Constants and macros for entire SIM_SCGC1 register */ //@{ #define HW_SIM_SCGC1_ADDR (REGS_SIM_BASE + 0x1028U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SCGC1 (*(__IO hw_sim_scgc1_t *) HW_SIM_SCGC1_ADDR) #define HW_SIM_SCGC1_RD() (HW_SIM_SCGC1.U) #define HW_SIM_SCGC1_WR(v) (HW_SIM_SCGC1.U = (v)) #define HW_SIM_SCGC1_SET(v) (HW_SIM_SCGC1_WR(HW_SIM_SCGC1_RD() | (v))) #define HW_SIM_SCGC1_CLR(v) (HW_SIM_SCGC1_WR(HW_SIM_SCGC1_RD() & ~(v))) #define HW_SIM_SCGC1_TOG(v) (HW_SIM_SCGC1_WR(HW_SIM_SCGC1_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SCGC1 bitfields */ /*! * @name Register SIM_SCGC1, field I2C2[6] (RW) * * This bit controls the clock gate to the I2C2 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC1_I2C2 (6U) //!< Bit position for SIM_SCGC1_I2C2. #define BM_SIM_SCGC1_I2C2 (0x00000040U) //!< Bit mask for SIM_SCGC1_I2C2. #define BS_SIM_SCGC1_I2C2 (1U) //!< Bit field size in bits for SIM_SCGC1_I2C2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC1_I2C2 field. #define BR_SIM_SCGC1_I2C2 (BITBAND_ACCESS32(HW_SIM_SCGC1_ADDR, BP_SIM_SCGC1_I2C2)) #endif //! @brief Format value for bitfield SIM_SCGC1_I2C2. #define BF_SIM_SCGC1_I2C2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC1_I2C2), uint32_t) & BM_SIM_SCGC1_I2C2) #ifndef __LANGUAGE_ASM__ //! @brief Set the I2C2 field to a new value. #define BW_SIM_SCGC1_I2C2(v) (BITBAND_ACCESS32(HW_SIM_SCGC1_ADDR, BP_SIM_SCGC1_I2C2) = (v)) #endif //@} /*! * @name Register SIM_SCGC1, field UART4[10] (RW) * * This bit controls the clock gate to the UART4 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC1_UART4 (10U) //!< Bit position for SIM_SCGC1_UART4. #define BM_SIM_SCGC1_UART4 (0x00000400U) //!< Bit mask for SIM_SCGC1_UART4. #define BS_SIM_SCGC1_UART4 (1U) //!< Bit field size in bits for SIM_SCGC1_UART4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC1_UART4 field. #define BR_SIM_SCGC1_UART4 (BITBAND_ACCESS32(HW_SIM_SCGC1_ADDR, BP_SIM_SCGC1_UART4)) #endif //! @brief Format value for bitfield SIM_SCGC1_UART4. #define BF_SIM_SCGC1_UART4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC1_UART4), uint32_t) & BM_SIM_SCGC1_UART4) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART4 field to a new value. #define BW_SIM_SCGC1_UART4(v) (BITBAND_ACCESS32(HW_SIM_SCGC1_ADDR, BP_SIM_SCGC1_UART4) = (v)) #endif //@} /*! * @name Register SIM_SCGC1, field UART5[11] (RW) * * This bit controls the clock gate to the UART5 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC1_UART5 (11U) //!< Bit position for SIM_SCGC1_UART5. #define BM_SIM_SCGC1_UART5 (0x00000800U) //!< Bit mask for SIM_SCGC1_UART5. #define BS_SIM_SCGC1_UART5 (1U) //!< Bit field size in bits for SIM_SCGC1_UART5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC1_UART5 field. #define BR_SIM_SCGC1_UART5 (BITBAND_ACCESS32(HW_SIM_SCGC1_ADDR, BP_SIM_SCGC1_UART5)) #endif //! @brief Format value for bitfield SIM_SCGC1_UART5. #define BF_SIM_SCGC1_UART5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC1_UART5), uint32_t) & BM_SIM_SCGC1_UART5) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART5 field to a new value. #define BW_SIM_SCGC1_UART5(v) (BITBAND_ACCESS32(HW_SIM_SCGC1_ADDR, BP_SIM_SCGC1_UART5) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SCGC2 - System Clock Gating Control Register 2 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SCGC2 - System Clock Gating Control Register 2 (RW) * * Reset value: 0x00000000U * * DAC0 can be accessed through both AIPS0 and AIPS1. When accessing through * AIPS1, define the clock gate control bits in the SCGC2. When accessing through * AIPS0, define the clock gate control bits in SCGC6. */ typedef union _hw_sim_scgc2 { uint32_t U; struct _hw_sim_scgc2_bitfields { uint32_t ENETb : 1; //!< [0] ENET Clock Gate Control uint32_t RESERVED0 : 11; //!< [11:1] uint32_t DAC0b : 1; //!< [12] DAC0 Clock Gate Control uint32_t DAC1b : 1; //!< [13] DAC1 Clock Gate Control uint32_t RESERVED1 : 18; //!< [31:14] } B; } hw_sim_scgc2_t; #endif /*! * @name Constants and macros for entire SIM_SCGC2 register */ //@{ #define HW_SIM_SCGC2_ADDR (REGS_SIM_BASE + 0x102CU) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SCGC2 (*(__IO hw_sim_scgc2_t *) HW_SIM_SCGC2_ADDR) #define HW_SIM_SCGC2_RD() (HW_SIM_SCGC2.U) #define HW_SIM_SCGC2_WR(v) (HW_SIM_SCGC2.U = (v)) #define HW_SIM_SCGC2_SET(v) (HW_SIM_SCGC2_WR(HW_SIM_SCGC2_RD() | (v))) #define HW_SIM_SCGC2_CLR(v) (HW_SIM_SCGC2_WR(HW_SIM_SCGC2_RD() & ~(v))) #define HW_SIM_SCGC2_TOG(v) (HW_SIM_SCGC2_WR(HW_SIM_SCGC2_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SCGC2 bitfields */ /*! * @name Register SIM_SCGC2, field ENET[0] (RW) * * This bit controls the clock gate to the ENET module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC2_ENET (0U) //!< Bit position for SIM_SCGC2_ENET. #define BM_SIM_SCGC2_ENET (0x00000001U) //!< Bit mask for SIM_SCGC2_ENET. #define BS_SIM_SCGC2_ENET (1U) //!< Bit field size in bits for SIM_SCGC2_ENET. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC2_ENET field. #define BR_SIM_SCGC2_ENET (BITBAND_ACCESS32(HW_SIM_SCGC2_ADDR, BP_SIM_SCGC2_ENET)) #endif //! @brief Format value for bitfield SIM_SCGC2_ENET. #define BF_SIM_SCGC2_ENET(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC2_ENET), uint32_t) & BM_SIM_SCGC2_ENET) #ifndef __LANGUAGE_ASM__ //! @brief Set the ENET field to a new value. #define BW_SIM_SCGC2_ENET(v) (BITBAND_ACCESS32(HW_SIM_SCGC2_ADDR, BP_SIM_SCGC2_ENET) = (v)) #endif //@} /*! * @name Register SIM_SCGC2, field DAC0[12] (RW) * * This bit controls the clock gate to the DAC0 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC2_DAC0 (12U) //!< Bit position for SIM_SCGC2_DAC0. #define BM_SIM_SCGC2_DAC0 (0x00001000U) //!< Bit mask for SIM_SCGC2_DAC0. #define BS_SIM_SCGC2_DAC0 (1U) //!< Bit field size in bits for SIM_SCGC2_DAC0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC2_DAC0 field. #define BR_SIM_SCGC2_DAC0 (BITBAND_ACCESS32(HW_SIM_SCGC2_ADDR, BP_SIM_SCGC2_DAC0)) #endif //! @brief Format value for bitfield SIM_SCGC2_DAC0. #define BF_SIM_SCGC2_DAC0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC2_DAC0), uint32_t) & BM_SIM_SCGC2_DAC0) #ifndef __LANGUAGE_ASM__ //! @brief Set the DAC0 field to a new value. #define BW_SIM_SCGC2_DAC0(v) (BITBAND_ACCESS32(HW_SIM_SCGC2_ADDR, BP_SIM_SCGC2_DAC0) = (v)) #endif //@} /*! * @name Register SIM_SCGC2, field DAC1[13] (RW) * * This bit controls the clock gate to the DAC1 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC2_DAC1 (13U) //!< Bit position for SIM_SCGC2_DAC1. #define BM_SIM_SCGC2_DAC1 (0x00002000U) //!< Bit mask for SIM_SCGC2_DAC1. #define BS_SIM_SCGC2_DAC1 (1U) //!< Bit field size in bits for SIM_SCGC2_DAC1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC2_DAC1 field. #define BR_SIM_SCGC2_DAC1 (BITBAND_ACCESS32(HW_SIM_SCGC2_ADDR, BP_SIM_SCGC2_DAC1)) #endif //! @brief Format value for bitfield SIM_SCGC2_DAC1. #define BF_SIM_SCGC2_DAC1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC2_DAC1), uint32_t) & BM_SIM_SCGC2_DAC1) #ifndef __LANGUAGE_ASM__ //! @brief Set the DAC1 field to a new value. #define BW_SIM_SCGC2_DAC1(v) (BITBAND_ACCESS32(HW_SIM_SCGC2_ADDR, BP_SIM_SCGC2_DAC1) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SCGC3 - System Clock Gating Control Register 3 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SCGC3 - System Clock Gating Control Register 3 (RW) * * Reset value: 0x00000000U * * FTM2 and RNGA can be accessed through both AIPS0 and AIPS1. When accessing * through AIPS1, define the clock gate control bits in the SCGC3. When accessing * through AIPS0, define the clock gate control bits in SCGC6. */ typedef union _hw_sim_scgc3 { uint32_t U; struct _hw_sim_scgc3_bitfields { uint32_t RNGA : 1; //!< [0] RNGA Clock Gate Control uint32_t RESERVED0 : 11; //!< [11:1] uint32_t SPI2b : 1; //!< [12] SPI2 Clock Gate Control uint32_t RESERVED1 : 4; //!< [16:13] uint32_t SDHCb : 1; //!< [17] SDHC Clock Gate Control uint32_t RESERVED2 : 6; //!< [23:18] uint32_t FTM2b : 1; //!< [24] FTM2 Clock Gate Control uint32_t FTM3b : 1; //!< [25] FTM3 Clock Gate Control uint32_t RESERVED3 : 1; //!< [26] uint32_t ADC1b : 1; //!< [27] ADC1 Clock Gate Control uint32_t RESERVED4 : 4; //!< [31:28] } B; } hw_sim_scgc3_t; #endif /*! * @name Constants and macros for entire SIM_SCGC3 register */ //@{ #define HW_SIM_SCGC3_ADDR (REGS_SIM_BASE + 0x1030U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SCGC3 (*(__IO hw_sim_scgc3_t *) HW_SIM_SCGC3_ADDR) #define HW_SIM_SCGC3_RD() (HW_SIM_SCGC3.U) #define HW_SIM_SCGC3_WR(v) (HW_SIM_SCGC3.U = (v)) #define HW_SIM_SCGC3_SET(v) (HW_SIM_SCGC3_WR(HW_SIM_SCGC3_RD() | (v))) #define HW_SIM_SCGC3_CLR(v) (HW_SIM_SCGC3_WR(HW_SIM_SCGC3_RD() & ~(v))) #define HW_SIM_SCGC3_TOG(v) (HW_SIM_SCGC3_WR(HW_SIM_SCGC3_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SCGC3 bitfields */ /*! * @name Register SIM_SCGC3, field RNGA[0] (RW) * * This bit controls the clock gate to the RNGA module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC3_RNGA (0U) //!< Bit position for SIM_SCGC3_RNGA. #define BM_SIM_SCGC3_RNGA (0x00000001U) //!< Bit mask for SIM_SCGC3_RNGA. #define BS_SIM_SCGC3_RNGA (1U) //!< Bit field size in bits for SIM_SCGC3_RNGA. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC3_RNGA field. #define BR_SIM_SCGC3_RNGA (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_RNGA)) #endif //! @brief Format value for bitfield SIM_SCGC3_RNGA. #define BF_SIM_SCGC3_RNGA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC3_RNGA), uint32_t) & BM_SIM_SCGC3_RNGA) #ifndef __LANGUAGE_ASM__ //! @brief Set the RNGA field to a new value. #define BW_SIM_SCGC3_RNGA(v) (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_RNGA) = (v)) #endif //@} /*! * @name Register SIM_SCGC3, field SPI2[12] (RW) * * This bit controls the clock gate to the SPI2 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC3_SPI2 (12U) //!< Bit position for SIM_SCGC3_SPI2. #define BM_SIM_SCGC3_SPI2 (0x00001000U) //!< Bit mask for SIM_SCGC3_SPI2. #define BS_SIM_SCGC3_SPI2 (1U) //!< Bit field size in bits for SIM_SCGC3_SPI2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC3_SPI2 field. #define BR_SIM_SCGC3_SPI2 (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_SPI2)) #endif //! @brief Format value for bitfield SIM_SCGC3_SPI2. #define BF_SIM_SCGC3_SPI2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC3_SPI2), uint32_t) & BM_SIM_SCGC3_SPI2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SPI2 field to a new value. #define BW_SIM_SCGC3_SPI2(v) (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_SPI2) = (v)) #endif //@} /*! * @name Register SIM_SCGC3, field SDHC[17] (RW) * * This bit controls the clock gate to the SDHC module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC3_SDHC (17U) //!< Bit position for SIM_SCGC3_SDHC. #define BM_SIM_SCGC3_SDHC (0x00020000U) //!< Bit mask for SIM_SCGC3_SDHC. #define BS_SIM_SCGC3_SDHC (1U) //!< Bit field size in bits for SIM_SCGC3_SDHC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC3_SDHC field. #define BR_SIM_SCGC3_SDHC (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_SDHC)) #endif //! @brief Format value for bitfield SIM_SCGC3_SDHC. #define BF_SIM_SCGC3_SDHC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC3_SDHC), uint32_t) & BM_SIM_SCGC3_SDHC) #ifndef __LANGUAGE_ASM__ //! @brief Set the SDHC field to a new value. #define BW_SIM_SCGC3_SDHC(v) (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_SDHC) = (v)) #endif //@} /*! * @name Register SIM_SCGC3, field FTM2[24] (RW) * * This bit controls the clock gate to the FTM2 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC3_FTM2 (24U) //!< Bit position for SIM_SCGC3_FTM2. #define BM_SIM_SCGC3_FTM2 (0x01000000U) //!< Bit mask for SIM_SCGC3_FTM2. #define BS_SIM_SCGC3_FTM2 (1U) //!< Bit field size in bits for SIM_SCGC3_FTM2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC3_FTM2 field. #define BR_SIM_SCGC3_FTM2 (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_FTM2)) #endif //! @brief Format value for bitfield SIM_SCGC3_FTM2. #define BF_SIM_SCGC3_FTM2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC3_FTM2), uint32_t) & BM_SIM_SCGC3_FTM2) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM2 field to a new value. #define BW_SIM_SCGC3_FTM2(v) (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_FTM2) = (v)) #endif //@} /*! * @name Register SIM_SCGC3, field FTM3[25] (RW) * * This bit controls the clock gate to the FTM3 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC3_FTM3 (25U) //!< Bit position for SIM_SCGC3_FTM3. #define BM_SIM_SCGC3_FTM3 (0x02000000U) //!< Bit mask for SIM_SCGC3_FTM3. #define BS_SIM_SCGC3_FTM3 (1U) //!< Bit field size in bits for SIM_SCGC3_FTM3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC3_FTM3 field. #define BR_SIM_SCGC3_FTM3 (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_FTM3)) #endif //! @brief Format value for bitfield SIM_SCGC3_FTM3. #define BF_SIM_SCGC3_FTM3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC3_FTM3), uint32_t) & BM_SIM_SCGC3_FTM3) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM3 field to a new value. #define BW_SIM_SCGC3_FTM3(v) (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_FTM3) = (v)) #endif //@} /*! * @name Register SIM_SCGC3, field ADC1[27] (RW) * * This bit controls the clock gate to the ADC1 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC3_ADC1 (27U) //!< Bit position for SIM_SCGC3_ADC1. #define BM_SIM_SCGC3_ADC1 (0x08000000U) //!< Bit mask for SIM_SCGC3_ADC1. #define BS_SIM_SCGC3_ADC1 (1U) //!< Bit field size in bits for SIM_SCGC3_ADC1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC3_ADC1 field. #define BR_SIM_SCGC3_ADC1 (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_ADC1)) #endif //! @brief Format value for bitfield SIM_SCGC3_ADC1. #define BF_SIM_SCGC3_ADC1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC3_ADC1), uint32_t) & BM_SIM_SCGC3_ADC1) #ifndef __LANGUAGE_ASM__ //! @brief Set the ADC1 field to a new value. #define BW_SIM_SCGC3_ADC1(v) (BITBAND_ACCESS32(HW_SIM_SCGC3_ADDR, BP_SIM_SCGC3_ADC1) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SCGC4 - System Clock Gating Control Register 4 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SCGC4 - System Clock Gating Control Register 4 (RW) * * Reset value: 0xF0100030U */ typedef union _hw_sim_scgc4 { uint32_t U; struct _hw_sim_scgc4_bitfields { uint32_t RESERVED0 : 1; //!< [0] uint32_t EWMb : 1; //!< [1] EWM Clock Gate Control uint32_t CMTb : 1; //!< [2] CMT Clock Gate Control uint32_t RESERVED1 : 3; //!< [5:3] uint32_t I2C0b : 1; //!< [6] I2C0 Clock Gate Control uint32_t I2C1b : 1; //!< [7] I2C1 Clock Gate Control uint32_t RESERVED2 : 2; //!< [9:8] uint32_t UART0b : 1; //!< [10] UART0 Clock Gate Control uint32_t UART1b : 1; //!< [11] UART1 Clock Gate Control uint32_t UART2b : 1; //!< [12] UART2 Clock Gate Control uint32_t UART3b : 1; //!< [13] UART3 Clock Gate Control uint32_t RESERVED3 : 4; //!< [17:14] uint32_t USBOTG : 1; //!< [18] USB Clock Gate Control uint32_t CMP : 1; //!< [19] Comparator Clock Gate Control uint32_t VREFb : 1; //!< [20] VREF Clock Gate Control uint32_t RESERVED4 : 11; //!< [31:21] } B; } hw_sim_scgc4_t; #endif /*! * @name Constants and macros for entire SIM_SCGC4 register */ //@{ #define HW_SIM_SCGC4_ADDR (REGS_SIM_BASE + 0x1034U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SCGC4 (*(__IO hw_sim_scgc4_t *) HW_SIM_SCGC4_ADDR) #define HW_SIM_SCGC4_RD() (HW_SIM_SCGC4.U) #define HW_SIM_SCGC4_WR(v) (HW_SIM_SCGC4.U = (v)) #define HW_SIM_SCGC4_SET(v) (HW_SIM_SCGC4_WR(HW_SIM_SCGC4_RD() | (v))) #define HW_SIM_SCGC4_CLR(v) (HW_SIM_SCGC4_WR(HW_SIM_SCGC4_RD() & ~(v))) #define HW_SIM_SCGC4_TOG(v) (HW_SIM_SCGC4_WR(HW_SIM_SCGC4_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SCGC4 bitfields */ /*! * @name Register SIM_SCGC4, field EWM[1] (RW) * * This bit controls the clock gate to the EWM module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_EWM (1U) //!< Bit position for SIM_SCGC4_EWM. #define BM_SIM_SCGC4_EWM (0x00000002U) //!< Bit mask for SIM_SCGC4_EWM. #define BS_SIM_SCGC4_EWM (1U) //!< Bit field size in bits for SIM_SCGC4_EWM. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_EWM field. #define BR_SIM_SCGC4_EWM (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_EWM)) #endif //! @brief Format value for bitfield SIM_SCGC4_EWM. #define BF_SIM_SCGC4_EWM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_EWM), uint32_t) & BM_SIM_SCGC4_EWM) #ifndef __LANGUAGE_ASM__ //! @brief Set the EWM field to a new value. #define BW_SIM_SCGC4_EWM(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_EWM) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field CMT[2] (RW) * * This bit controls the clock gate to the CMT module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_CMT (2U) //!< Bit position for SIM_SCGC4_CMT. #define BM_SIM_SCGC4_CMT (0x00000004U) //!< Bit mask for SIM_SCGC4_CMT. #define BS_SIM_SCGC4_CMT (1U) //!< Bit field size in bits for SIM_SCGC4_CMT. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_CMT field. #define BR_SIM_SCGC4_CMT (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_CMT)) #endif //! @brief Format value for bitfield SIM_SCGC4_CMT. #define BF_SIM_SCGC4_CMT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_CMT), uint32_t) & BM_SIM_SCGC4_CMT) #ifndef __LANGUAGE_ASM__ //! @brief Set the CMT field to a new value. #define BW_SIM_SCGC4_CMT(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_CMT) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field I2C0[6] (RW) * * This bit controls the clock gate to the I 2 C0 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_I2C0 (6U) //!< Bit position for SIM_SCGC4_I2C0. #define BM_SIM_SCGC4_I2C0 (0x00000040U) //!< Bit mask for SIM_SCGC4_I2C0. #define BS_SIM_SCGC4_I2C0 (1U) //!< Bit field size in bits for SIM_SCGC4_I2C0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_I2C0 field. #define BR_SIM_SCGC4_I2C0 (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_I2C0)) #endif //! @brief Format value for bitfield SIM_SCGC4_I2C0. #define BF_SIM_SCGC4_I2C0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_I2C0), uint32_t) & BM_SIM_SCGC4_I2C0) #ifndef __LANGUAGE_ASM__ //! @brief Set the I2C0 field to a new value. #define BW_SIM_SCGC4_I2C0(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_I2C0) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field I2C1[7] (RW) * * This bit controls the clock gate to the I 2 C1 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_I2C1 (7U) //!< Bit position for SIM_SCGC4_I2C1. #define BM_SIM_SCGC4_I2C1 (0x00000080U) //!< Bit mask for SIM_SCGC4_I2C1. #define BS_SIM_SCGC4_I2C1 (1U) //!< Bit field size in bits for SIM_SCGC4_I2C1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_I2C1 field. #define BR_SIM_SCGC4_I2C1 (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_I2C1)) #endif //! @brief Format value for bitfield SIM_SCGC4_I2C1. #define BF_SIM_SCGC4_I2C1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_I2C1), uint32_t) & BM_SIM_SCGC4_I2C1) #ifndef __LANGUAGE_ASM__ //! @brief Set the I2C1 field to a new value. #define BW_SIM_SCGC4_I2C1(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_I2C1) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field UART0[10] (RW) * * This bit controls the clock gate to the UART0 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_UART0 (10U) //!< Bit position for SIM_SCGC4_UART0. #define BM_SIM_SCGC4_UART0 (0x00000400U) //!< Bit mask for SIM_SCGC4_UART0. #define BS_SIM_SCGC4_UART0 (1U) //!< Bit field size in bits for SIM_SCGC4_UART0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_UART0 field. #define BR_SIM_SCGC4_UART0 (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_UART0)) #endif //! @brief Format value for bitfield SIM_SCGC4_UART0. #define BF_SIM_SCGC4_UART0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_UART0), uint32_t) & BM_SIM_SCGC4_UART0) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART0 field to a new value. #define BW_SIM_SCGC4_UART0(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_UART0) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field UART1[11] (RW) * * This bit controls the clock gate to the UART1 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_UART1 (11U) //!< Bit position for SIM_SCGC4_UART1. #define BM_SIM_SCGC4_UART1 (0x00000800U) //!< Bit mask for SIM_SCGC4_UART1. #define BS_SIM_SCGC4_UART1 (1U) //!< Bit field size in bits for SIM_SCGC4_UART1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_UART1 field. #define BR_SIM_SCGC4_UART1 (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_UART1)) #endif //! @brief Format value for bitfield SIM_SCGC4_UART1. #define BF_SIM_SCGC4_UART1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_UART1), uint32_t) & BM_SIM_SCGC4_UART1) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART1 field to a new value. #define BW_SIM_SCGC4_UART1(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_UART1) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field UART2[12] (RW) * * This bit controls the clock gate to the UART2 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_UART2 (12U) //!< Bit position for SIM_SCGC4_UART2. #define BM_SIM_SCGC4_UART2 (0x00001000U) //!< Bit mask for SIM_SCGC4_UART2. #define BS_SIM_SCGC4_UART2 (1U) //!< Bit field size in bits for SIM_SCGC4_UART2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_UART2 field. #define BR_SIM_SCGC4_UART2 (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_UART2)) #endif //! @brief Format value for bitfield SIM_SCGC4_UART2. #define BF_SIM_SCGC4_UART2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_UART2), uint32_t) & BM_SIM_SCGC4_UART2) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART2 field to a new value. #define BW_SIM_SCGC4_UART2(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_UART2) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field UART3[13] (RW) * * This bit controls the clock gate to the UART3 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_UART3 (13U) //!< Bit position for SIM_SCGC4_UART3. #define BM_SIM_SCGC4_UART3 (0x00002000U) //!< Bit mask for SIM_SCGC4_UART3. #define BS_SIM_SCGC4_UART3 (1U) //!< Bit field size in bits for SIM_SCGC4_UART3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_UART3 field. #define BR_SIM_SCGC4_UART3 (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_UART3)) #endif //! @brief Format value for bitfield SIM_SCGC4_UART3. #define BF_SIM_SCGC4_UART3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_UART3), uint32_t) & BM_SIM_SCGC4_UART3) #ifndef __LANGUAGE_ASM__ //! @brief Set the UART3 field to a new value. #define BW_SIM_SCGC4_UART3(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_UART3) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field USBOTG[18] (RW) * * This bit controls the clock gate to the USB module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_USBOTG (18U) //!< Bit position for SIM_SCGC4_USBOTG. #define BM_SIM_SCGC4_USBOTG (0x00040000U) //!< Bit mask for SIM_SCGC4_USBOTG. #define BS_SIM_SCGC4_USBOTG (1U) //!< Bit field size in bits for SIM_SCGC4_USBOTG. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_USBOTG field. #define BR_SIM_SCGC4_USBOTG (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_USBOTG)) #endif //! @brief Format value for bitfield SIM_SCGC4_USBOTG. #define BF_SIM_SCGC4_USBOTG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_USBOTG), uint32_t) & BM_SIM_SCGC4_USBOTG) #ifndef __LANGUAGE_ASM__ //! @brief Set the USBOTG field to a new value. #define BW_SIM_SCGC4_USBOTG(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_USBOTG) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field CMP[19] (RW) * * This bit controls the clock gate to the comparator module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_CMP (19U) //!< Bit position for SIM_SCGC4_CMP. #define BM_SIM_SCGC4_CMP (0x00080000U) //!< Bit mask for SIM_SCGC4_CMP. #define BS_SIM_SCGC4_CMP (1U) //!< Bit field size in bits for SIM_SCGC4_CMP. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_CMP field. #define BR_SIM_SCGC4_CMP (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_CMP)) #endif //! @brief Format value for bitfield SIM_SCGC4_CMP. #define BF_SIM_SCGC4_CMP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_CMP), uint32_t) & BM_SIM_SCGC4_CMP) #ifndef __LANGUAGE_ASM__ //! @brief Set the CMP field to a new value. #define BW_SIM_SCGC4_CMP(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_CMP) = (v)) #endif //@} /*! * @name Register SIM_SCGC4, field VREF[20] (RW) * * This bit controls the clock gate to the VREF module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC4_VREF (20U) //!< Bit position for SIM_SCGC4_VREF. #define BM_SIM_SCGC4_VREF (0x00100000U) //!< Bit mask for SIM_SCGC4_VREF. #define BS_SIM_SCGC4_VREF (1U) //!< Bit field size in bits for SIM_SCGC4_VREF. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC4_VREF field. #define BR_SIM_SCGC4_VREF (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_VREF)) #endif //! @brief Format value for bitfield SIM_SCGC4_VREF. #define BF_SIM_SCGC4_VREF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC4_VREF), uint32_t) & BM_SIM_SCGC4_VREF) #ifndef __LANGUAGE_ASM__ //! @brief Set the VREF field to a new value. #define BW_SIM_SCGC4_VREF(v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR, BP_SIM_SCGC4_VREF) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SCGC5 - System Clock Gating Control Register 5 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SCGC5 - System Clock Gating Control Register 5 (RW) * * Reset value: 0x00040182U */ typedef union _hw_sim_scgc5 { uint32_t U; struct _hw_sim_scgc5_bitfields { uint32_t LPTMR : 1; //!< [0] Low Power Timer Access Control uint32_t RESERVED0 : 8; //!< [8:1] uint32_t PORTAb : 1; //!< [9] Port A Clock Gate Control uint32_t PORTBb : 1; //!< [10] Port B Clock Gate Control uint32_t PORTCb : 1; //!< [11] Port C Clock Gate Control uint32_t PORTDb : 1; //!< [12] Port D Clock Gate Control uint32_t PORTEb : 1; //!< [13] Port E Clock Gate Control uint32_t RESERVED1 : 18; //!< [31:14] } B; } hw_sim_scgc5_t; #endif /*! * @name Constants and macros for entire SIM_SCGC5 register */ //@{ #define HW_SIM_SCGC5_ADDR (REGS_SIM_BASE + 0x1038U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SCGC5 (*(__IO hw_sim_scgc5_t *) HW_SIM_SCGC5_ADDR) #define HW_SIM_SCGC5_RD() (HW_SIM_SCGC5.U) #define HW_SIM_SCGC5_WR(v) (HW_SIM_SCGC5.U = (v)) #define HW_SIM_SCGC5_SET(v) (HW_SIM_SCGC5_WR(HW_SIM_SCGC5_RD() | (v))) #define HW_SIM_SCGC5_CLR(v) (HW_SIM_SCGC5_WR(HW_SIM_SCGC5_RD() & ~(v))) #define HW_SIM_SCGC5_TOG(v) (HW_SIM_SCGC5_WR(HW_SIM_SCGC5_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SCGC5 bitfields */ /*! * @name Register SIM_SCGC5, field LPTMR[0] (RW) * * This bit controls software access to the Low Power Timer module. * * Values: * - 0 - Access disabled * - 1 - Access enabled */ //@{ #define BP_SIM_SCGC5_LPTMR (0U) //!< Bit position for SIM_SCGC5_LPTMR. #define BM_SIM_SCGC5_LPTMR (0x00000001U) //!< Bit mask for SIM_SCGC5_LPTMR. #define BS_SIM_SCGC5_LPTMR (1U) //!< Bit field size in bits for SIM_SCGC5_LPTMR. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC5_LPTMR field. #define BR_SIM_SCGC5_LPTMR (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_LPTMR)) #endif //! @brief Format value for bitfield SIM_SCGC5_LPTMR. #define BF_SIM_SCGC5_LPTMR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC5_LPTMR), uint32_t) & BM_SIM_SCGC5_LPTMR) #ifndef __LANGUAGE_ASM__ //! @brief Set the LPTMR field to a new value. #define BW_SIM_SCGC5_LPTMR(v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_LPTMR) = (v)) #endif //@} /*! * @name Register SIM_SCGC5, field PORTA[9] (RW) * * This bit controls the clock gate to the Port A module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC5_PORTA (9U) //!< Bit position for SIM_SCGC5_PORTA. #define BM_SIM_SCGC5_PORTA (0x00000200U) //!< Bit mask for SIM_SCGC5_PORTA. #define BS_SIM_SCGC5_PORTA (1U) //!< Bit field size in bits for SIM_SCGC5_PORTA. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC5_PORTA field. #define BR_SIM_SCGC5_PORTA (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTA)) #endif //! @brief Format value for bitfield SIM_SCGC5_PORTA. #define BF_SIM_SCGC5_PORTA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC5_PORTA), uint32_t) & BM_SIM_SCGC5_PORTA) #ifndef __LANGUAGE_ASM__ //! @brief Set the PORTA field to a new value. #define BW_SIM_SCGC5_PORTA(v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTA) = (v)) #endif //@} /*! * @name Register SIM_SCGC5, field PORTB[10] (RW) * * This bit controls the clock gate to the Port B module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC5_PORTB (10U) //!< Bit position for SIM_SCGC5_PORTB. #define BM_SIM_SCGC5_PORTB (0x00000400U) //!< Bit mask for SIM_SCGC5_PORTB. #define BS_SIM_SCGC5_PORTB (1U) //!< Bit field size in bits for SIM_SCGC5_PORTB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC5_PORTB field. #define BR_SIM_SCGC5_PORTB (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTB)) #endif //! @brief Format value for bitfield SIM_SCGC5_PORTB. #define BF_SIM_SCGC5_PORTB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC5_PORTB), uint32_t) & BM_SIM_SCGC5_PORTB) #ifndef __LANGUAGE_ASM__ //! @brief Set the PORTB field to a new value. #define BW_SIM_SCGC5_PORTB(v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTB) = (v)) #endif //@} /*! * @name Register SIM_SCGC5, field PORTC[11] (RW) * * This bit controls the clock gate to the Port C module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC5_PORTC (11U) //!< Bit position for SIM_SCGC5_PORTC. #define BM_SIM_SCGC5_PORTC (0x00000800U) //!< Bit mask for SIM_SCGC5_PORTC. #define BS_SIM_SCGC5_PORTC (1U) //!< Bit field size in bits for SIM_SCGC5_PORTC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC5_PORTC field. #define BR_SIM_SCGC5_PORTC (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTC)) #endif //! @brief Format value for bitfield SIM_SCGC5_PORTC. #define BF_SIM_SCGC5_PORTC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC5_PORTC), uint32_t) & BM_SIM_SCGC5_PORTC) #ifndef __LANGUAGE_ASM__ //! @brief Set the PORTC field to a new value. #define BW_SIM_SCGC5_PORTC(v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTC) = (v)) #endif //@} /*! * @name Register SIM_SCGC5, field PORTD[12] (RW) * * This bit controls the clock gate to the Port D module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC5_PORTD (12U) //!< Bit position for SIM_SCGC5_PORTD. #define BM_SIM_SCGC5_PORTD (0x00001000U) //!< Bit mask for SIM_SCGC5_PORTD. #define BS_SIM_SCGC5_PORTD (1U) //!< Bit field size in bits for SIM_SCGC5_PORTD. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC5_PORTD field. #define BR_SIM_SCGC5_PORTD (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTD)) #endif //! @brief Format value for bitfield SIM_SCGC5_PORTD. #define BF_SIM_SCGC5_PORTD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC5_PORTD), uint32_t) & BM_SIM_SCGC5_PORTD) #ifndef __LANGUAGE_ASM__ //! @brief Set the PORTD field to a new value. #define BW_SIM_SCGC5_PORTD(v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTD) = (v)) #endif //@} /*! * @name Register SIM_SCGC5, field PORTE[13] (RW) * * This bit controls the clock gate to the Port E module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC5_PORTE (13U) //!< Bit position for SIM_SCGC5_PORTE. #define BM_SIM_SCGC5_PORTE (0x00002000U) //!< Bit mask for SIM_SCGC5_PORTE. #define BS_SIM_SCGC5_PORTE (1U) //!< Bit field size in bits for SIM_SCGC5_PORTE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC5_PORTE field. #define BR_SIM_SCGC5_PORTE (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTE)) #endif //! @brief Format value for bitfield SIM_SCGC5_PORTE. #define BF_SIM_SCGC5_PORTE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC5_PORTE), uint32_t) & BM_SIM_SCGC5_PORTE) #ifndef __LANGUAGE_ASM__ //! @brief Set the PORTE field to a new value. #define BW_SIM_SCGC5_PORTE(v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR, BP_SIM_SCGC5_PORTE) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SCGC6 - System Clock Gating Control Register 6 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SCGC6 - System Clock Gating Control Register 6 (RW) * * Reset value: 0x40000001U * * DAC0, FTM2, and RNGA can be accessed through both AIPS0 and AIPS1. When * accessing through AIPS1, define the clock gate control bits in the SCGC2 and SCGC3. * When accessing through AIPS0, define the clock gate control bits in SCGC6. */ typedef union _hw_sim_scgc6 { uint32_t U; struct _hw_sim_scgc6_bitfields { uint32_t FTF : 1; //!< [0] Flash Memory Clock Gate Control uint32_t DMAMUXb : 1; //!< [1] DMA Mux Clock Gate Control uint32_t RESERVED0 : 2; //!< [3:2] uint32_t FLEXCAN0 : 1; //!< [4] FlexCAN0 Clock Gate Control uint32_t RESERVED1 : 4; //!< [8:5] uint32_t RNGA : 1; //!< [9] RNGA Clock Gate Control uint32_t RESERVED2 : 2; //!< [11:10] uint32_t SPI0b : 1; //!< [12] SPI0 Clock Gate Control uint32_t SPI1b : 1; //!< [13] SPI1 Clock Gate Control uint32_t RESERVED3 : 1; //!< [14] uint32_t I2S : 1; //!< [15] I2S Clock Gate Control uint32_t RESERVED4 : 2; //!< [17:16] uint32_t CRCb : 1; //!< [18] CRC Clock Gate Control uint32_t RESERVED5 : 2; //!< [20:19] uint32_t USBDCDb : 1; //!< [21] USB DCD Clock Gate Control uint32_t PDB : 1; //!< [22] PDB Clock Gate Control uint32_t PITb : 1; //!< [23] PIT Clock Gate Control uint32_t FTM0b : 1; //!< [24] FTM0 Clock Gate Control uint32_t FTM1b : 1; //!< [25] FTM1 Clock Gate Control uint32_t FTM2b : 1; //!< [26] FTM2 Clock Gate Control uint32_t ADC0b : 1; //!< [27] ADC0 Clock Gate Control uint32_t RESERVED6 : 1; //!< [28] uint32_t RTCb : 1; //!< [29] RTC Access Control uint32_t RESERVED7 : 1; //!< [30] uint32_t DAC0b : 1; //!< [31] DAC0 Clock Gate Control } B; } hw_sim_scgc6_t; #endif /*! * @name Constants and macros for entire SIM_SCGC6 register */ //@{ #define HW_SIM_SCGC6_ADDR (REGS_SIM_BASE + 0x103CU) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SCGC6 (*(__IO hw_sim_scgc6_t *) HW_SIM_SCGC6_ADDR) #define HW_SIM_SCGC6_RD() (HW_SIM_SCGC6.U) #define HW_SIM_SCGC6_WR(v) (HW_SIM_SCGC6.U = (v)) #define HW_SIM_SCGC6_SET(v) (HW_SIM_SCGC6_WR(HW_SIM_SCGC6_RD() | (v))) #define HW_SIM_SCGC6_CLR(v) (HW_SIM_SCGC6_WR(HW_SIM_SCGC6_RD() & ~(v))) #define HW_SIM_SCGC6_TOG(v) (HW_SIM_SCGC6_WR(HW_SIM_SCGC6_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SCGC6 bitfields */ /*! * @name Register SIM_SCGC6, field FTF[0] (RW) * * This bit controls the clock gate to the flash memory. Flash reads are still * supported while the flash memory is clock gated, but entry into low power modes * is blocked. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_FTF (0U) //!< Bit position for SIM_SCGC6_FTF. #define BM_SIM_SCGC6_FTF (0x00000001U) //!< Bit mask for SIM_SCGC6_FTF. #define BS_SIM_SCGC6_FTF (1U) //!< Bit field size in bits for SIM_SCGC6_FTF. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_FTF field. #define BR_SIM_SCGC6_FTF (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FTF)) #endif //! @brief Format value for bitfield SIM_SCGC6_FTF. #define BF_SIM_SCGC6_FTF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_FTF), uint32_t) & BM_SIM_SCGC6_FTF) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTF field to a new value. #define BW_SIM_SCGC6_FTF(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FTF) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field DMAMUX[1] (RW) * * This bit controls the clock gate to the DMA Mux module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_DMAMUX (1U) //!< Bit position for SIM_SCGC6_DMAMUX. #define BM_SIM_SCGC6_DMAMUX (0x00000002U) //!< Bit mask for SIM_SCGC6_DMAMUX. #define BS_SIM_SCGC6_DMAMUX (1U) //!< Bit field size in bits for SIM_SCGC6_DMAMUX. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_DMAMUX field. #define BR_SIM_SCGC6_DMAMUX (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_DMAMUX)) #endif //! @brief Format value for bitfield SIM_SCGC6_DMAMUX. #define BF_SIM_SCGC6_DMAMUX(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_DMAMUX), uint32_t) & BM_SIM_SCGC6_DMAMUX) #ifndef __LANGUAGE_ASM__ //! @brief Set the DMAMUX field to a new value. #define BW_SIM_SCGC6_DMAMUX(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_DMAMUX) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field FLEXCAN0[4] (RW) * * This bit controls the clock gate to the FlexCAN0 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_FLEXCAN0 (4U) //!< Bit position for SIM_SCGC6_FLEXCAN0. #define BM_SIM_SCGC6_FLEXCAN0 (0x00000010U) //!< Bit mask for SIM_SCGC6_FLEXCAN0. #define BS_SIM_SCGC6_FLEXCAN0 (1U) //!< Bit field size in bits for SIM_SCGC6_FLEXCAN0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_FLEXCAN0 field. #define BR_SIM_SCGC6_FLEXCAN0 (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FLEXCAN0)) #endif //! @brief Format value for bitfield SIM_SCGC6_FLEXCAN0. #define BF_SIM_SCGC6_FLEXCAN0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_FLEXCAN0), uint32_t) & BM_SIM_SCGC6_FLEXCAN0) #ifndef __LANGUAGE_ASM__ //! @brief Set the FLEXCAN0 field to a new value. #define BW_SIM_SCGC6_FLEXCAN0(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FLEXCAN0) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field RNGA[9] (RW) * * This bit controls the clock gate to the RNGA module. */ //@{ #define BP_SIM_SCGC6_RNGA (9U) //!< Bit position for SIM_SCGC6_RNGA. #define BM_SIM_SCGC6_RNGA (0x00000200U) //!< Bit mask for SIM_SCGC6_RNGA. #define BS_SIM_SCGC6_RNGA (1U) //!< Bit field size in bits for SIM_SCGC6_RNGA. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_RNGA field. #define BR_SIM_SCGC6_RNGA (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_RNGA)) #endif //! @brief Format value for bitfield SIM_SCGC6_RNGA. #define BF_SIM_SCGC6_RNGA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_RNGA), uint32_t) & BM_SIM_SCGC6_RNGA) #ifndef __LANGUAGE_ASM__ //! @brief Set the RNGA field to a new value. #define BW_SIM_SCGC6_RNGA(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_RNGA) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field SPI0[12] (RW) * * This bit controls the clock gate to the SPI0 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_SPI0 (12U) //!< Bit position for SIM_SCGC6_SPI0. #define BM_SIM_SCGC6_SPI0 (0x00001000U) //!< Bit mask for SIM_SCGC6_SPI0. #define BS_SIM_SCGC6_SPI0 (1U) //!< Bit field size in bits for SIM_SCGC6_SPI0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_SPI0 field. #define BR_SIM_SCGC6_SPI0 (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_SPI0)) #endif //! @brief Format value for bitfield SIM_SCGC6_SPI0. #define BF_SIM_SCGC6_SPI0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_SPI0), uint32_t) & BM_SIM_SCGC6_SPI0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SPI0 field to a new value. #define BW_SIM_SCGC6_SPI0(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_SPI0) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field SPI1[13] (RW) * * This bit controls the clock gate to the SPI1 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_SPI1 (13U) //!< Bit position for SIM_SCGC6_SPI1. #define BM_SIM_SCGC6_SPI1 (0x00002000U) //!< Bit mask for SIM_SCGC6_SPI1. #define BS_SIM_SCGC6_SPI1 (1U) //!< Bit field size in bits for SIM_SCGC6_SPI1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_SPI1 field. #define BR_SIM_SCGC6_SPI1 (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_SPI1)) #endif //! @brief Format value for bitfield SIM_SCGC6_SPI1. #define BF_SIM_SCGC6_SPI1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_SPI1), uint32_t) & BM_SIM_SCGC6_SPI1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SPI1 field to a new value. #define BW_SIM_SCGC6_SPI1(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_SPI1) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field I2S[15] (RW) * * This bit controls the clock gate to the I 2 S module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_I2S (15U) //!< Bit position for SIM_SCGC6_I2S. #define BM_SIM_SCGC6_I2S (0x00008000U) //!< Bit mask for SIM_SCGC6_I2S. #define BS_SIM_SCGC6_I2S (1U) //!< Bit field size in bits for SIM_SCGC6_I2S. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_I2S field. #define BR_SIM_SCGC6_I2S (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_I2S)) #endif //! @brief Format value for bitfield SIM_SCGC6_I2S. #define BF_SIM_SCGC6_I2S(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_I2S), uint32_t) & BM_SIM_SCGC6_I2S) #ifndef __LANGUAGE_ASM__ //! @brief Set the I2S field to a new value. #define BW_SIM_SCGC6_I2S(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_I2S) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field CRC[18] (RW) * * This bit controls the clock gate to the CRC module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_CRC (18U) //!< Bit position for SIM_SCGC6_CRC. #define BM_SIM_SCGC6_CRC (0x00040000U) //!< Bit mask for SIM_SCGC6_CRC. #define BS_SIM_SCGC6_CRC (1U) //!< Bit field size in bits for SIM_SCGC6_CRC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_CRC field. #define BR_SIM_SCGC6_CRC (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_CRC)) #endif //! @brief Format value for bitfield SIM_SCGC6_CRC. #define BF_SIM_SCGC6_CRC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_CRC), uint32_t) & BM_SIM_SCGC6_CRC) #ifndef __LANGUAGE_ASM__ //! @brief Set the CRC field to a new value. #define BW_SIM_SCGC6_CRC(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_CRC) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field USBDCD[21] (RW) * * This bit controls the clock gate to the USB DCD module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_USBDCD (21U) //!< Bit position for SIM_SCGC6_USBDCD. #define BM_SIM_SCGC6_USBDCD (0x00200000U) //!< Bit mask for SIM_SCGC6_USBDCD. #define BS_SIM_SCGC6_USBDCD (1U) //!< Bit field size in bits for SIM_SCGC6_USBDCD. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_USBDCD field. #define BR_SIM_SCGC6_USBDCD (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_USBDCD)) #endif //! @brief Format value for bitfield SIM_SCGC6_USBDCD. #define BF_SIM_SCGC6_USBDCD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_USBDCD), uint32_t) & BM_SIM_SCGC6_USBDCD) #ifndef __LANGUAGE_ASM__ //! @brief Set the USBDCD field to a new value. #define BW_SIM_SCGC6_USBDCD(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_USBDCD) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field PDB[22] (RW) * * This bit controls the clock gate to the PDB module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_PDB (22U) //!< Bit position for SIM_SCGC6_PDB. #define BM_SIM_SCGC6_PDB (0x00400000U) //!< Bit mask for SIM_SCGC6_PDB. #define BS_SIM_SCGC6_PDB (1U) //!< Bit field size in bits for SIM_SCGC6_PDB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_PDB field. #define BR_SIM_SCGC6_PDB (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_PDB)) #endif //! @brief Format value for bitfield SIM_SCGC6_PDB. #define BF_SIM_SCGC6_PDB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_PDB), uint32_t) & BM_SIM_SCGC6_PDB) #ifndef __LANGUAGE_ASM__ //! @brief Set the PDB field to a new value. #define BW_SIM_SCGC6_PDB(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_PDB) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field PIT[23] (RW) * * This bit controls the clock gate to the PIT module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_PIT (23U) //!< Bit position for SIM_SCGC6_PIT. #define BM_SIM_SCGC6_PIT (0x00800000U) //!< Bit mask for SIM_SCGC6_PIT. #define BS_SIM_SCGC6_PIT (1U) //!< Bit field size in bits for SIM_SCGC6_PIT. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_PIT field. #define BR_SIM_SCGC6_PIT (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_PIT)) #endif //! @brief Format value for bitfield SIM_SCGC6_PIT. #define BF_SIM_SCGC6_PIT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_PIT), uint32_t) & BM_SIM_SCGC6_PIT) #ifndef __LANGUAGE_ASM__ //! @brief Set the PIT field to a new value. #define BW_SIM_SCGC6_PIT(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_PIT) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field FTM0[24] (RW) * * This bit controls the clock gate to the FTM0 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_FTM0 (24U) //!< Bit position for SIM_SCGC6_FTM0. #define BM_SIM_SCGC6_FTM0 (0x01000000U) //!< Bit mask for SIM_SCGC6_FTM0. #define BS_SIM_SCGC6_FTM0 (1U) //!< Bit field size in bits for SIM_SCGC6_FTM0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_FTM0 field. #define BR_SIM_SCGC6_FTM0 (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FTM0)) #endif //! @brief Format value for bitfield SIM_SCGC6_FTM0. #define BF_SIM_SCGC6_FTM0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_FTM0), uint32_t) & BM_SIM_SCGC6_FTM0) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM0 field to a new value. #define BW_SIM_SCGC6_FTM0(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FTM0) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field FTM1[25] (RW) * * This bit controls the clock gate to the FTM1 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_FTM1 (25U) //!< Bit position for SIM_SCGC6_FTM1. #define BM_SIM_SCGC6_FTM1 (0x02000000U) //!< Bit mask for SIM_SCGC6_FTM1. #define BS_SIM_SCGC6_FTM1 (1U) //!< Bit field size in bits for SIM_SCGC6_FTM1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_FTM1 field. #define BR_SIM_SCGC6_FTM1 (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FTM1)) #endif //! @brief Format value for bitfield SIM_SCGC6_FTM1. #define BF_SIM_SCGC6_FTM1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_FTM1), uint32_t) & BM_SIM_SCGC6_FTM1) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM1 field to a new value. #define BW_SIM_SCGC6_FTM1(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FTM1) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field FTM2[26] (RW) * * This bit controls the clock gate to the FTM2 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_FTM2 (26U) //!< Bit position for SIM_SCGC6_FTM2. #define BM_SIM_SCGC6_FTM2 (0x04000000U) //!< Bit mask for SIM_SCGC6_FTM2. #define BS_SIM_SCGC6_FTM2 (1U) //!< Bit field size in bits for SIM_SCGC6_FTM2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_FTM2 field. #define BR_SIM_SCGC6_FTM2 (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FTM2)) #endif //! @brief Format value for bitfield SIM_SCGC6_FTM2. #define BF_SIM_SCGC6_FTM2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_FTM2), uint32_t) & BM_SIM_SCGC6_FTM2) #ifndef __LANGUAGE_ASM__ //! @brief Set the FTM2 field to a new value. #define BW_SIM_SCGC6_FTM2(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_FTM2) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field ADC0[27] (RW) * * This bit controls the clock gate to the ADC0 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_ADC0 (27U) //!< Bit position for SIM_SCGC6_ADC0. #define BM_SIM_SCGC6_ADC0 (0x08000000U) //!< Bit mask for SIM_SCGC6_ADC0. #define BS_SIM_SCGC6_ADC0 (1U) //!< Bit field size in bits for SIM_SCGC6_ADC0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_ADC0 field. #define BR_SIM_SCGC6_ADC0 (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_ADC0)) #endif //! @brief Format value for bitfield SIM_SCGC6_ADC0. #define BF_SIM_SCGC6_ADC0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_ADC0), uint32_t) & BM_SIM_SCGC6_ADC0) #ifndef __LANGUAGE_ASM__ //! @brief Set the ADC0 field to a new value. #define BW_SIM_SCGC6_ADC0(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_ADC0) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field RTC[29] (RW) * * This bit controls software access and interrupts to the RTC module. * * Values: * - 0 - Access and interrupts disabled * - 1 - Access and interrupts enabled */ //@{ #define BP_SIM_SCGC6_RTC (29U) //!< Bit position for SIM_SCGC6_RTC. #define BM_SIM_SCGC6_RTC (0x20000000U) //!< Bit mask for SIM_SCGC6_RTC. #define BS_SIM_SCGC6_RTC (1U) //!< Bit field size in bits for SIM_SCGC6_RTC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_RTC field. #define BR_SIM_SCGC6_RTC (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_RTC)) #endif //! @brief Format value for bitfield SIM_SCGC6_RTC. #define BF_SIM_SCGC6_RTC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_RTC), uint32_t) & BM_SIM_SCGC6_RTC) #ifndef __LANGUAGE_ASM__ //! @brief Set the RTC field to a new value. #define BW_SIM_SCGC6_RTC(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_RTC) = (v)) #endif //@} /*! * @name Register SIM_SCGC6, field DAC0[31] (RW) * * This bit controls the clock gate to the DAC0 module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC6_DAC0 (31U) //!< Bit position for SIM_SCGC6_DAC0. #define BM_SIM_SCGC6_DAC0 (0x80000000U) //!< Bit mask for SIM_SCGC6_DAC0. #define BS_SIM_SCGC6_DAC0 (1U) //!< Bit field size in bits for SIM_SCGC6_DAC0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC6_DAC0 field. #define BR_SIM_SCGC6_DAC0 (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_DAC0)) #endif //! @brief Format value for bitfield SIM_SCGC6_DAC0. #define BF_SIM_SCGC6_DAC0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC6_DAC0), uint32_t) & BM_SIM_SCGC6_DAC0) #ifndef __LANGUAGE_ASM__ //! @brief Set the DAC0 field to a new value. #define BW_SIM_SCGC6_DAC0(v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR, BP_SIM_SCGC6_DAC0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_SCGC7 - System Clock Gating Control Register 7 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_SCGC7 - System Clock Gating Control Register 7 (RW) * * Reset value: 0x00000006U */ typedef union _hw_sim_scgc7 { uint32_t U; struct _hw_sim_scgc7_bitfields { uint32_t FLEXBUS : 1; //!< [0] FlexBus Clock Gate Control uint32_t DMAb : 1; //!< [1] DMA Clock Gate Control uint32_t MPUb : 1; //!< [2] MPU Clock Gate Control uint32_t RESERVED0 : 29; //!< [31:3] } B; } hw_sim_scgc7_t; #endif /*! * @name Constants and macros for entire SIM_SCGC7 register */ //@{ #define HW_SIM_SCGC7_ADDR (REGS_SIM_BASE + 0x1040U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_SCGC7 (*(__IO hw_sim_scgc7_t *) HW_SIM_SCGC7_ADDR) #define HW_SIM_SCGC7_RD() (HW_SIM_SCGC7.U) #define HW_SIM_SCGC7_WR(v) (HW_SIM_SCGC7.U = (v)) #define HW_SIM_SCGC7_SET(v) (HW_SIM_SCGC7_WR(HW_SIM_SCGC7_RD() | (v))) #define HW_SIM_SCGC7_CLR(v) (HW_SIM_SCGC7_WR(HW_SIM_SCGC7_RD() & ~(v))) #define HW_SIM_SCGC7_TOG(v) (HW_SIM_SCGC7_WR(HW_SIM_SCGC7_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_SCGC7 bitfields */ /*! * @name Register SIM_SCGC7, field FLEXBUS[0] (RW) * * This bit controls the clock gate to the FlexBus module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC7_FLEXBUS (0U) //!< Bit position for SIM_SCGC7_FLEXBUS. #define BM_SIM_SCGC7_FLEXBUS (0x00000001U) //!< Bit mask for SIM_SCGC7_FLEXBUS. #define BS_SIM_SCGC7_FLEXBUS (1U) //!< Bit field size in bits for SIM_SCGC7_FLEXBUS. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC7_FLEXBUS field. #define BR_SIM_SCGC7_FLEXBUS (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR, BP_SIM_SCGC7_FLEXBUS)) #endif //! @brief Format value for bitfield SIM_SCGC7_FLEXBUS. #define BF_SIM_SCGC7_FLEXBUS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC7_FLEXBUS), uint32_t) & BM_SIM_SCGC7_FLEXBUS) #ifndef __LANGUAGE_ASM__ //! @brief Set the FLEXBUS field to a new value. #define BW_SIM_SCGC7_FLEXBUS(v) (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR, BP_SIM_SCGC7_FLEXBUS) = (v)) #endif //@} /*! * @name Register SIM_SCGC7, field DMA[1] (RW) * * This bit controls the clock gate to the DMA module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC7_DMA (1U) //!< Bit position for SIM_SCGC7_DMA. #define BM_SIM_SCGC7_DMA (0x00000002U) //!< Bit mask for SIM_SCGC7_DMA. #define BS_SIM_SCGC7_DMA (1U) //!< Bit field size in bits for SIM_SCGC7_DMA. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC7_DMA field. #define BR_SIM_SCGC7_DMA (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR, BP_SIM_SCGC7_DMA)) #endif //! @brief Format value for bitfield SIM_SCGC7_DMA. #define BF_SIM_SCGC7_DMA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC7_DMA), uint32_t) & BM_SIM_SCGC7_DMA) #ifndef __LANGUAGE_ASM__ //! @brief Set the DMA field to a new value. #define BW_SIM_SCGC7_DMA(v) (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR, BP_SIM_SCGC7_DMA) = (v)) #endif //@} /*! * @name Register SIM_SCGC7, field MPU[2] (RW) * * This bit controls the clock gate to the MPU module. * * Values: * - 0 - Clock disabled * - 1 - Clock enabled */ //@{ #define BP_SIM_SCGC7_MPU (2U) //!< Bit position for SIM_SCGC7_MPU. #define BM_SIM_SCGC7_MPU (0x00000004U) //!< Bit mask for SIM_SCGC7_MPU. #define BS_SIM_SCGC7_MPU (1U) //!< Bit field size in bits for SIM_SCGC7_MPU. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_SCGC7_MPU field. #define BR_SIM_SCGC7_MPU (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR, BP_SIM_SCGC7_MPU)) #endif //! @brief Format value for bitfield SIM_SCGC7_MPU. #define BF_SIM_SCGC7_MPU(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_SCGC7_MPU), uint32_t) & BM_SIM_SCGC7_MPU) #ifndef __LANGUAGE_ASM__ //! @brief Set the MPU field to a new value. #define BW_SIM_SCGC7_MPU(v) (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR, BP_SIM_SCGC7_MPU) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_CLKDIV1 - System Clock Divider Register 1 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_CLKDIV1 - System Clock Divider Register 1 (RW) * * Reset value: 0x00010000U * * When updating CLKDIV1, update all fields using the one write command. * Attempting to write an invalid clock ratio to the CLKDIV1 register will cause the * write to be ignored. The maximum divide ratio that can be programmed between * core/system clock and the other divided clocks is divide by 8. When OUTDIV1 equals * 0000 (divide by 1), the other dividers cannot be set higher than 0111 (divide * by 8). The CLKDIV1 register cannot be written to when the device is in VLPR * mode. */ typedef union _hw_sim_clkdiv1 { uint32_t U; struct _hw_sim_clkdiv1_bitfields { uint32_t RESERVED0 : 16; //!< [15:0] uint32_t OUTDIV4 : 4; //!< [19:16] Clock 4 output divider value uint32_t OUTDIV3 : 4; //!< [23:20] Clock 3 output divider value uint32_t OUTDIV2 : 4; //!< [27:24] Clock 2 output divider value uint32_t OUTDIV1 : 4; //!< [31:28] Clock 1 output divider value } B; } hw_sim_clkdiv1_t; #endif /*! * @name Constants and macros for entire SIM_CLKDIV1 register */ //@{ #define HW_SIM_CLKDIV1_ADDR (REGS_SIM_BASE + 0x1044U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_CLKDIV1 (*(__IO hw_sim_clkdiv1_t *) HW_SIM_CLKDIV1_ADDR) #define HW_SIM_CLKDIV1_RD() (HW_SIM_CLKDIV1.U) #define HW_SIM_CLKDIV1_WR(v) (HW_SIM_CLKDIV1.U = (v)) #define HW_SIM_CLKDIV1_SET(v) (HW_SIM_CLKDIV1_WR(HW_SIM_CLKDIV1_RD() | (v))) #define HW_SIM_CLKDIV1_CLR(v) (HW_SIM_CLKDIV1_WR(HW_SIM_CLKDIV1_RD() & ~(v))) #define HW_SIM_CLKDIV1_TOG(v) (HW_SIM_CLKDIV1_WR(HW_SIM_CLKDIV1_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_CLKDIV1 bitfields */ /*! * @name Register SIM_CLKDIV1, field OUTDIV4[19:16] (RW) * * This field sets the divide value for the flash clock from MCGOUTCLK. At the * end of reset, it is loaded with either 0001 or 1111 depending on * FTF_FOPT[LPBOOT]. The flash clock frequency must be an integer divide of the system clock * frequency. * * Values: * - 0000 - Divide-by-1. * - 0001 - Divide-by-2. * - 0010 - Divide-by-3. * - 0011 - Divide-by-4. * - 0100 - Divide-by-5. * - 0101 - Divide-by-6. * - 0110 - Divide-by-7. * - 0111 - Divide-by-8. * - 1000 - Divide-by-9. * - 1001 - Divide-by-10. * - 1010 - Divide-by-11. * - 1011 - Divide-by-12. * - 1100 - Divide-by-13. * - 1101 - Divide-by-14. * - 1110 - Divide-by-15. * - 1111 - Divide-by-16. */ //@{ #define BP_SIM_CLKDIV1_OUTDIV4 (16U) //!< Bit position for SIM_CLKDIV1_OUTDIV4. #define BM_SIM_CLKDIV1_OUTDIV4 (0x000F0000U) //!< Bit mask for SIM_CLKDIV1_OUTDIV4. #define BS_SIM_CLKDIV1_OUTDIV4 (4U) //!< Bit field size in bits for SIM_CLKDIV1_OUTDIV4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_CLKDIV1_OUTDIV4 field. #define BR_SIM_CLKDIV1_OUTDIV4 (HW_SIM_CLKDIV1.B.OUTDIV4) #endif //! @brief Format value for bitfield SIM_CLKDIV1_OUTDIV4. #define BF_SIM_CLKDIV1_OUTDIV4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_CLKDIV1_OUTDIV4), uint32_t) & BM_SIM_CLKDIV1_OUTDIV4) #ifndef __LANGUAGE_ASM__ //! @brief Set the OUTDIV4 field to a new value. #define BW_SIM_CLKDIV1_OUTDIV4(v) (HW_SIM_CLKDIV1_WR((HW_SIM_CLKDIV1_RD() & ~BM_SIM_CLKDIV1_OUTDIV4) | BF_SIM_CLKDIV1_OUTDIV4(v))) #endif //@} /*! * @name Register SIM_CLKDIV1, field OUTDIV3[23:20] (RW) * * This field sets the divide value for the FlexBus clock (external pin FB_CLK) * from MCGOUTCLK. At the end of reset, it is loaded with either 0001 or 1111 * depending on FTF_FOPT[LPBOOT]. The FlexBus clock frequency must be an integer * divide of the system clock frequency. * * Values: * - 0000 - Divide-by-1. * - 0001 - Divide-by-2. * - 0010 - Divide-by-3. * - 0011 - Divide-by-4. * - 0100 - Divide-by-5. * - 0101 - Divide-by-6. * - 0110 - Divide-by-7. * - 0111 - Divide-by-8. * - 1000 - Divide-by-9. * - 1001 - Divide-by-10. * - 1010 - Divide-by-11. * - 1011 - Divide-by-12. * - 1100 - Divide-by-13. * - 1101 - Divide-by-14. * - 1110 - Divide-by-15. * - 1111 - Divide-by-16. */ //@{ #define BP_SIM_CLKDIV1_OUTDIV3 (20U) //!< Bit position for SIM_CLKDIV1_OUTDIV3. #define BM_SIM_CLKDIV1_OUTDIV3 (0x00F00000U) //!< Bit mask for SIM_CLKDIV1_OUTDIV3. #define BS_SIM_CLKDIV1_OUTDIV3 (4U) //!< Bit field size in bits for SIM_CLKDIV1_OUTDIV3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_CLKDIV1_OUTDIV3 field. #define BR_SIM_CLKDIV1_OUTDIV3 (HW_SIM_CLKDIV1.B.OUTDIV3) #endif //! @brief Format value for bitfield SIM_CLKDIV1_OUTDIV3. #define BF_SIM_CLKDIV1_OUTDIV3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_CLKDIV1_OUTDIV3), uint32_t) & BM_SIM_CLKDIV1_OUTDIV3) #ifndef __LANGUAGE_ASM__ //! @brief Set the OUTDIV3 field to a new value. #define BW_SIM_CLKDIV1_OUTDIV3(v) (HW_SIM_CLKDIV1_WR((HW_SIM_CLKDIV1_RD() & ~BM_SIM_CLKDIV1_OUTDIV3) | BF_SIM_CLKDIV1_OUTDIV3(v))) #endif //@} /*! * @name Register SIM_CLKDIV1, field OUTDIV2[27:24] (RW) * * This field sets the divide value for the bus clock from MCGOUTCLK. At the end * of reset, it is loaded with either 0000 or 0111 depending on * FTF_FOPT[LPBOOT]. The bus clock frequency must be an integer divide of the core/system clock * frequency. * * Values: * - 0000 - Divide-by-1. * - 0001 - Divide-by-2. * - 0010 - Divide-by-3. * - 0011 - Divide-by-4. * - 0100 - Divide-by-5. * - 0101 - Divide-by-6. * - 0110 - Divide-by-7. * - 0111 - Divide-by-8. * - 1000 - Divide-by-9. * - 1001 - Divide-by-10. * - 1010 - Divide-by-11. * - 1011 - Divide-by-12. * - 1100 - Divide-by-13. * - 1101 - Divide-by-14. * - 1110 - Divide-by-15. * - 1111 - Divide-by-16. */ //@{ #define BP_SIM_CLKDIV1_OUTDIV2 (24U) //!< Bit position for SIM_CLKDIV1_OUTDIV2. #define BM_SIM_CLKDIV1_OUTDIV2 (0x0F000000U) //!< Bit mask for SIM_CLKDIV1_OUTDIV2. #define BS_SIM_CLKDIV1_OUTDIV2 (4U) //!< Bit field size in bits for SIM_CLKDIV1_OUTDIV2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_CLKDIV1_OUTDIV2 field. #define BR_SIM_CLKDIV1_OUTDIV2 (HW_SIM_CLKDIV1.B.OUTDIV2) #endif //! @brief Format value for bitfield SIM_CLKDIV1_OUTDIV2. #define BF_SIM_CLKDIV1_OUTDIV2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_CLKDIV1_OUTDIV2), uint32_t) & BM_SIM_CLKDIV1_OUTDIV2) #ifndef __LANGUAGE_ASM__ //! @brief Set the OUTDIV2 field to a new value. #define BW_SIM_CLKDIV1_OUTDIV2(v) (HW_SIM_CLKDIV1_WR((HW_SIM_CLKDIV1_RD() & ~BM_SIM_CLKDIV1_OUTDIV2) | BF_SIM_CLKDIV1_OUTDIV2(v))) #endif //@} /*! * @name Register SIM_CLKDIV1, field OUTDIV1[31:28] (RW) * * This field sets the divide value for the core/system clock from MCGOUTCLK. At * the end of reset, it is loaded with either 0000 or 0111 depending on * FTF_FOPT[LPBOOT]. * * Values: * - 0000 - Divide-by-1. * - 0001 - Divide-by-2. * - 0010 - Divide-by-3. * - 0011 - Divide-by-4. * - 0100 - Divide-by-5. * - 0101 - Divide-by-6. * - 0110 - Divide-by-7. * - 0111 - Divide-by-8. * - 1000 - Divide-by-9. * - 1001 - Divide-by-10. * - 1010 - Divide-by-11. * - 1011 - Divide-by-12. * - 1100 - Divide-by-13. * - 1101 - Divide-by-14. * - 1110 - Divide-by-15. * - 1111 - Divide-by-16. */ //@{ #define BP_SIM_CLKDIV1_OUTDIV1 (28U) //!< Bit position for SIM_CLKDIV1_OUTDIV1. #define BM_SIM_CLKDIV1_OUTDIV1 (0xF0000000U) //!< Bit mask for SIM_CLKDIV1_OUTDIV1. #define BS_SIM_CLKDIV1_OUTDIV1 (4U) //!< Bit field size in bits for SIM_CLKDIV1_OUTDIV1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_CLKDIV1_OUTDIV1 field. #define BR_SIM_CLKDIV1_OUTDIV1 (HW_SIM_CLKDIV1.B.OUTDIV1) #endif //! @brief Format value for bitfield SIM_CLKDIV1_OUTDIV1. #define BF_SIM_CLKDIV1_OUTDIV1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_CLKDIV1_OUTDIV1), uint32_t) & BM_SIM_CLKDIV1_OUTDIV1) #ifndef __LANGUAGE_ASM__ //! @brief Set the OUTDIV1 field to a new value. #define BW_SIM_CLKDIV1_OUTDIV1(v) (HW_SIM_CLKDIV1_WR((HW_SIM_CLKDIV1_RD() & ~BM_SIM_CLKDIV1_OUTDIV1) | BF_SIM_CLKDIV1_OUTDIV1(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_CLKDIV2 - System Clock Divider Register 2 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_CLKDIV2 - System Clock Divider Register 2 (RW) * * Reset value: 0x00000000U */ typedef union _hw_sim_clkdiv2 { uint32_t U; struct _hw_sim_clkdiv2_bitfields { uint32_t USBFRAC : 1; //!< [0] USB clock divider fraction uint32_t USBDIV : 3; //!< [3:1] USB clock divider divisor uint32_t RESERVED0 : 28; //!< [31:4] } B; } hw_sim_clkdiv2_t; #endif /*! * @name Constants and macros for entire SIM_CLKDIV2 register */ //@{ #define HW_SIM_CLKDIV2_ADDR (REGS_SIM_BASE + 0x1048U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_CLKDIV2 (*(__IO hw_sim_clkdiv2_t *) HW_SIM_CLKDIV2_ADDR) #define HW_SIM_CLKDIV2_RD() (HW_SIM_CLKDIV2.U) #define HW_SIM_CLKDIV2_WR(v) (HW_SIM_CLKDIV2.U = (v)) #define HW_SIM_CLKDIV2_SET(v) (HW_SIM_CLKDIV2_WR(HW_SIM_CLKDIV2_RD() | (v))) #define HW_SIM_CLKDIV2_CLR(v) (HW_SIM_CLKDIV2_WR(HW_SIM_CLKDIV2_RD() & ~(v))) #define HW_SIM_CLKDIV2_TOG(v) (HW_SIM_CLKDIV2_WR(HW_SIM_CLKDIV2_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_CLKDIV2 bitfields */ /*! * @name Register SIM_CLKDIV2, field USBFRAC[0] (RW) * * This field sets the fraction multiply value for the fractional clock divider * when the MCGFLLCLK/MCGPLLCLK clock is the USB clock source (SOPT2[USBSRC] = * 1). Divider output clock = Divider input clock * [ (USBFRAC+1) / (USBDIV+1) ] */ //@{ #define BP_SIM_CLKDIV2_USBFRAC (0U) //!< Bit position for SIM_CLKDIV2_USBFRAC. #define BM_SIM_CLKDIV2_USBFRAC (0x00000001U) //!< Bit mask for SIM_CLKDIV2_USBFRAC. #define BS_SIM_CLKDIV2_USBFRAC (1U) //!< Bit field size in bits for SIM_CLKDIV2_USBFRAC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_CLKDIV2_USBFRAC field. #define BR_SIM_CLKDIV2_USBFRAC (BITBAND_ACCESS32(HW_SIM_CLKDIV2_ADDR, BP_SIM_CLKDIV2_USBFRAC)) #endif //! @brief Format value for bitfield SIM_CLKDIV2_USBFRAC. #define BF_SIM_CLKDIV2_USBFRAC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_CLKDIV2_USBFRAC), uint32_t) & BM_SIM_CLKDIV2_USBFRAC) #ifndef __LANGUAGE_ASM__ //! @brief Set the USBFRAC field to a new value. #define BW_SIM_CLKDIV2_USBFRAC(v) (BITBAND_ACCESS32(HW_SIM_CLKDIV2_ADDR, BP_SIM_CLKDIV2_USBFRAC) = (v)) #endif //@} /*! * @name Register SIM_CLKDIV2, field USBDIV[3:1] (RW) * * This field sets the divide value for the fractional clock divider when the * MCGFLLCLK/MCGPLLCLK clock is the USB clock source (SOPT2[USBSRC] = 1). Divider * output clock = Divider input clock * [ (USBFRAC+1) / (USBDIV+1) ] */ //@{ #define BP_SIM_CLKDIV2_USBDIV (1U) //!< Bit position for SIM_CLKDIV2_USBDIV. #define BM_SIM_CLKDIV2_USBDIV (0x0000000EU) //!< Bit mask for SIM_CLKDIV2_USBDIV. #define BS_SIM_CLKDIV2_USBDIV (3U) //!< Bit field size in bits for SIM_CLKDIV2_USBDIV. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_CLKDIV2_USBDIV field. #define BR_SIM_CLKDIV2_USBDIV (HW_SIM_CLKDIV2.B.USBDIV) #endif //! @brief Format value for bitfield SIM_CLKDIV2_USBDIV. #define BF_SIM_CLKDIV2_USBDIV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_CLKDIV2_USBDIV), uint32_t) & BM_SIM_CLKDIV2_USBDIV) #ifndef __LANGUAGE_ASM__ //! @brief Set the USBDIV field to a new value. #define BW_SIM_CLKDIV2_USBDIV(v) (HW_SIM_CLKDIV2_WR((HW_SIM_CLKDIV2_RD() & ~BM_SIM_CLKDIV2_USBDIV) | BF_SIM_CLKDIV2_USBDIV(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_FCFG1 - Flash Configuration Register 1 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_FCFG1 - Flash Configuration Register 1 (RW) * * Reset value: 0xFF0F0F00U * * For devices with FlexNVM: The reset value of EESIZE and DEPART are based on * user programming in user IFR via the PGMPART flash command. For devices with * program flash only: */ typedef union _hw_sim_fcfg1 { uint32_t U; struct _hw_sim_fcfg1_bitfields { uint32_t FLASHDIS : 1; //!< [0] Flash Disable uint32_t FLASHDOZE : 1; //!< [1] Flash Doze uint32_t RESERVED0 : 6; //!< [7:2] uint32_t DEPART : 4; //!< [11:8] FlexNVM partition uint32_t RESERVED1 : 4; //!< [15:12] uint32_t EESIZE : 4; //!< [19:16] EEPROM size uint32_t RESERVED2 : 4; //!< [23:20] uint32_t PFSIZE : 4; //!< [27:24] Program flash size uint32_t NVMSIZE : 4; //!< [31:28] FlexNVM size } B; } hw_sim_fcfg1_t; #endif /*! * @name Constants and macros for entire SIM_FCFG1 register */ //@{ #define HW_SIM_FCFG1_ADDR (REGS_SIM_BASE + 0x104CU) #ifndef __LANGUAGE_ASM__ #define HW_SIM_FCFG1 (*(__IO hw_sim_fcfg1_t *) HW_SIM_FCFG1_ADDR) #define HW_SIM_FCFG1_RD() (HW_SIM_FCFG1.U) #define HW_SIM_FCFG1_WR(v) (HW_SIM_FCFG1.U = (v)) #define HW_SIM_FCFG1_SET(v) (HW_SIM_FCFG1_WR(HW_SIM_FCFG1_RD() | (v))) #define HW_SIM_FCFG1_CLR(v) (HW_SIM_FCFG1_WR(HW_SIM_FCFG1_RD() & ~(v))) #define HW_SIM_FCFG1_TOG(v) (HW_SIM_FCFG1_WR(HW_SIM_FCFG1_RD() ^ (v))) #endif //@} /* * Constants & macros for individual SIM_FCFG1 bitfields */ /*! * @name Register SIM_FCFG1, field FLASHDIS[0] (RW) * * Flash accesses are disabled (and generate a bus error) and the Flash memory * is placed in a low power state. This bit should not be changed during VLP * modes. Relocate the interrupt vectors out of Flash memory before disabling the * Flash. * * Values: * - 0 - Flash is enabled * - 1 - Flash is disabled */ //@{ #define BP_SIM_FCFG1_FLASHDIS (0U) //!< Bit position for SIM_FCFG1_FLASHDIS. #define BM_SIM_FCFG1_FLASHDIS (0x00000001U) //!< Bit mask for SIM_FCFG1_FLASHDIS. #define BS_SIM_FCFG1_FLASHDIS (1U) //!< Bit field size in bits for SIM_FCFG1_FLASHDIS. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_FCFG1_FLASHDIS field. #define BR_SIM_FCFG1_FLASHDIS (BITBAND_ACCESS32(HW_SIM_FCFG1_ADDR, BP_SIM_FCFG1_FLASHDIS)) #endif //! @brief Format value for bitfield SIM_FCFG1_FLASHDIS. #define BF_SIM_FCFG1_FLASHDIS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_FCFG1_FLASHDIS), uint32_t) & BM_SIM_FCFG1_FLASHDIS) #ifndef __LANGUAGE_ASM__ //! @brief Set the FLASHDIS field to a new value. #define BW_SIM_FCFG1_FLASHDIS(v) (BITBAND_ACCESS32(HW_SIM_FCFG1_ADDR, BP_SIM_FCFG1_FLASHDIS) = (v)) #endif //@} /*! * @name Register SIM_FCFG1, field FLASHDOZE[1] (RW) * * When set, Flash memory is disabled for the duration of Wait mode. An attempt * by the DMA or other bus master to access the Flash when the Flash is disabled * will result in a bus error. This bit should be clear during VLP modes. The * Flash will be automatically enabled again at the end of Wait mode so interrupt * vectors do not need to be relocated out of Flash memory. The wakeup time from * Wait mode is extended when this bit is set. * * Values: * - 0 - Flash remains enabled during Wait mode * - 1 - Flash is disabled for the duration of Wait mode */ //@{ #define BP_SIM_FCFG1_FLASHDOZE (1U) //!< Bit position for SIM_FCFG1_FLASHDOZE. #define BM_SIM_FCFG1_FLASHDOZE (0x00000002U) //!< Bit mask for SIM_FCFG1_FLASHDOZE. #define BS_SIM_FCFG1_FLASHDOZE (1U) //!< Bit field size in bits for SIM_FCFG1_FLASHDOZE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_FCFG1_FLASHDOZE field. #define BR_SIM_FCFG1_FLASHDOZE (BITBAND_ACCESS32(HW_SIM_FCFG1_ADDR, BP_SIM_FCFG1_FLASHDOZE)) #endif //! @brief Format value for bitfield SIM_FCFG1_FLASHDOZE. #define BF_SIM_FCFG1_FLASHDOZE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_SIM_FCFG1_FLASHDOZE), uint32_t) & BM_SIM_FCFG1_FLASHDOZE) #ifndef __LANGUAGE_ASM__ //! @brief Set the FLASHDOZE field to a new value. #define BW_SIM_FCFG1_FLASHDOZE(v) (BITBAND_ACCESS32(HW_SIM_FCFG1_ADDR, BP_SIM_FCFG1_FLASHDOZE) = (v)) #endif //@} /*! * @name Register SIM_FCFG1, field DEPART[11:8] (RO) * * For devices with FlexNVM: Data flash / EEPROM backup split . See DEPART bit * description in FTFE chapter. For devices without FlexNVM: Reserved */ //@{ #define BP_SIM_FCFG1_DEPART (8U) //!< Bit position for SIM_FCFG1_DEPART. #define BM_SIM_FCFG1_DEPART (0x00000F00U) //!< Bit mask for SIM_FCFG1_DEPART. #define BS_SIM_FCFG1_DEPART (4U) //!< Bit field size in bits for SIM_FCFG1_DEPART. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_FCFG1_DEPART field. #define BR_SIM_FCFG1_DEPART (HW_SIM_FCFG1.B.DEPART) #endif //@} /*! * @name Register SIM_FCFG1, field EESIZE[19:16] (RO) * * EEPROM data size . * * Values: * - 0000 - 16 KB * - 0001 - 8 KB * - 0010 - 4 KB * - 0011 - 2 KB * - 0100 - 1 KB * - 0101 - 512 Bytes * - 0110 - 256 Bytes * - 0111 - 128 Bytes * - 1000 - 64 Bytes * - 1001 - 32 Bytes * - 1111 - 0 Bytes */ //@{ #define BP_SIM_FCFG1_EESIZE (16U) //!< Bit position for SIM_FCFG1_EESIZE. #define BM_SIM_FCFG1_EESIZE (0x000F0000U) //!< Bit mask for SIM_FCFG1_EESIZE. #define BS_SIM_FCFG1_EESIZE (4U) //!< Bit field size in bits for SIM_FCFG1_EESIZE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_FCFG1_EESIZE field. #define BR_SIM_FCFG1_EESIZE (HW_SIM_FCFG1.B.EESIZE) #endif //@} /*! * @name Register SIM_FCFG1, field PFSIZE[27:24] (RO) * * This field specifies the amount of program flash memory available on the * device . Undefined values are reserved. * * Values: * - 0011 - 32 KB of program flash memory * - 0101 - 64 KB of program flash memory * - 0111 - 128 KB of program flash memory * - 1001 - 256 KB of program flash memory * - 1011 - 512 KB of program flash memory * - 1101 - 1024 KB of program flash memory * - 1111 - 1024 KB of program flash memory */ //@{ #define BP_SIM_FCFG1_PFSIZE (24U) //!< Bit position for SIM_FCFG1_PFSIZE. #define BM_SIM_FCFG1_PFSIZE (0x0F000000U) //!< Bit mask for SIM_FCFG1_PFSIZE. #define BS_SIM_FCFG1_PFSIZE (4U) //!< Bit field size in bits for SIM_FCFG1_PFSIZE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_FCFG1_PFSIZE field. #define BR_SIM_FCFG1_PFSIZE (HW_SIM_FCFG1.B.PFSIZE) #endif //@} /*! * @name Register SIM_FCFG1, field NVMSIZE[31:28] (RO) * * This field specifies the amount of FlexNVM memory available on the device . * Undefined values are reserved. * * Values: * - 0000 - 0 KB of FlexNVM * - 0011 - 32 KB of FlexNVM * - 0101 - 64 KB of FlexNVM * - 0111 - 128 KB of FlexNVM * - 1001 - 256 KB of FlexNVM * - 1011 - 512 KB of FlexNVM * - 1111 - 512 KB of FlexNVM */ //@{ #define BP_SIM_FCFG1_NVMSIZE (28U) //!< Bit position for SIM_FCFG1_NVMSIZE. #define BM_SIM_FCFG1_NVMSIZE (0xF0000000U) //!< Bit mask for SIM_FCFG1_NVMSIZE. #define BS_SIM_FCFG1_NVMSIZE (4U) //!< Bit field size in bits for SIM_FCFG1_NVMSIZE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_FCFG1_NVMSIZE field. #define BR_SIM_FCFG1_NVMSIZE (HW_SIM_FCFG1.B.NVMSIZE) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_FCFG2 - Flash Configuration Register 2 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_FCFG2 - Flash Configuration Register 2 (RO) * * Reset value: 0x7F7F0000U */ typedef union _hw_sim_fcfg2 { uint32_t U; struct _hw_sim_fcfg2_bitfields { uint32_t RESERVED0 : 16; //!< [15:0] uint32_t MAXADDR1 : 7; //!< [22:16] Max address block 1 uint32_t PFLSH : 1; //!< [23] Program flash only uint32_t MAXADDR0 : 7; //!< [30:24] Max address block 0 uint32_t RESERVED1 : 1; //!< [31] } B; } hw_sim_fcfg2_t; #endif /*! * @name Constants and macros for entire SIM_FCFG2 register */ //@{ #define HW_SIM_FCFG2_ADDR (REGS_SIM_BASE + 0x1050U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_FCFG2 (*(__I hw_sim_fcfg2_t *) HW_SIM_FCFG2_ADDR) #define HW_SIM_FCFG2_RD() (HW_SIM_FCFG2.U) #endif //@} /* * Constants & macros for individual SIM_FCFG2 bitfields */ /*! * @name Register SIM_FCFG2, field MAXADDR1[22:16] (RO) * * For devices with FlexNVM: This field concatenated with 13 trailing zeros plus * the FlexNVM base address indicates the first invalid address of the FlexNVM * flash block. For example, if MAXADDR1 = 0x20 the first invalid address of * FlexNVM flash block is 0x4_0000 + 0x1000_0000 . This would be the MAXADDR1 value * for a device with 256 KB FlexNVM. For devices with program flash only: This * field equals zero if there is only one program flash block, otherwise it equals * the value of the MAXADDR0 field. For example, with MAXADDR0 = MAXADDR1 = 0x20 * the first invalid address of flash block 1 is 0x4_0000 + 0x4_0000. This would be * the MAXADDR1 value for a device with 512 KB program flash memory across two * flash blocks and no FlexNVM. */ //@{ #define BP_SIM_FCFG2_MAXADDR1 (16U) //!< Bit position for SIM_FCFG2_MAXADDR1. #define BM_SIM_FCFG2_MAXADDR1 (0x007F0000U) //!< Bit mask for SIM_FCFG2_MAXADDR1. #define BS_SIM_FCFG2_MAXADDR1 (7U) //!< Bit field size in bits for SIM_FCFG2_MAXADDR1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_FCFG2_MAXADDR1 field. #define BR_SIM_FCFG2_MAXADDR1 (HW_SIM_FCFG2.B.MAXADDR1) #endif //@} /*! * @name Register SIM_FCFG2, field PFLSH[23] (RO) * * For devices with FlexNVM, this bit is always clear. For devices without * FlexNVM, this bit is always set. * * Values: * - 0 - Device supports FlexNVM * - 1 - Program Flash only, device does not support FlexNVM */ //@{ #define BP_SIM_FCFG2_PFLSH (23U) //!< Bit position for SIM_FCFG2_PFLSH. #define BM_SIM_FCFG2_PFLSH (0x00800000U) //!< Bit mask for SIM_FCFG2_PFLSH. #define BS_SIM_FCFG2_PFLSH (1U) //!< Bit field size in bits for SIM_FCFG2_PFLSH. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_FCFG2_PFLSH field. #define BR_SIM_FCFG2_PFLSH (BITBAND_ACCESS32(HW_SIM_FCFG2_ADDR, BP_SIM_FCFG2_PFLSH)) #endif //@} /*! * @name Register SIM_FCFG2, field MAXADDR0[30:24] (RO) * * This field concatenated with 13 trailing zeros indicates the first invalid * address of each program flash block. For example, if MAXADDR0 = 0x20 the first * invalid address of flash block 0 is 0x0004_0000. This would be the MAXADDR0 * value for a device with 256 KB program flash in flash block 0. */ //@{ #define BP_SIM_FCFG2_MAXADDR0 (24U) //!< Bit position for SIM_FCFG2_MAXADDR0. #define BM_SIM_FCFG2_MAXADDR0 (0x7F000000U) //!< Bit mask for SIM_FCFG2_MAXADDR0. #define BS_SIM_FCFG2_MAXADDR0 (7U) //!< Bit field size in bits for SIM_FCFG2_MAXADDR0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_FCFG2_MAXADDR0 field. #define BR_SIM_FCFG2_MAXADDR0 (HW_SIM_FCFG2.B.MAXADDR0) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_UIDH - Unique Identification Register High //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_UIDH - Unique Identification Register High (RO) * * Reset value: 0x00000000U */ typedef union _hw_sim_uidh { uint32_t U; struct _hw_sim_uidh_bitfields { uint32_t UID : 32; //!< [31:0] Unique Identification } B; } hw_sim_uidh_t; #endif /*! * @name Constants and macros for entire SIM_UIDH register */ //@{ #define HW_SIM_UIDH_ADDR (REGS_SIM_BASE + 0x1054U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_UIDH (*(__I hw_sim_uidh_t *) HW_SIM_UIDH_ADDR) #define HW_SIM_UIDH_RD() (HW_SIM_UIDH.U) #endif //@} /* * Constants & macros for individual SIM_UIDH bitfields */ /*! * @name Register SIM_UIDH, field UID[31:0] (RO) * * Unique identification for the device. */ //@{ #define BP_SIM_UIDH_UID (0U) //!< Bit position for SIM_UIDH_UID. #define BM_SIM_UIDH_UID (0xFFFFFFFFU) //!< Bit mask for SIM_UIDH_UID. #define BS_SIM_UIDH_UID (32U) //!< Bit field size in bits for SIM_UIDH_UID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_UIDH_UID field. #define BR_SIM_UIDH_UID (HW_SIM_UIDH.U) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_UIDMH - Unique Identification Register Mid-High //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_UIDMH - Unique Identification Register Mid-High (RO) * * Reset value: 0x00000000U */ typedef union _hw_sim_uidmh { uint32_t U; struct _hw_sim_uidmh_bitfields { uint32_t UID : 32; //!< [31:0] Unique Identification } B; } hw_sim_uidmh_t; #endif /*! * @name Constants and macros for entire SIM_UIDMH register */ //@{ #define HW_SIM_UIDMH_ADDR (REGS_SIM_BASE + 0x1058U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_UIDMH (*(__I hw_sim_uidmh_t *) HW_SIM_UIDMH_ADDR) #define HW_SIM_UIDMH_RD() (HW_SIM_UIDMH.U) #endif //@} /* * Constants & macros for individual SIM_UIDMH bitfields */ /*! * @name Register SIM_UIDMH, field UID[31:0] (RO) * * Unique identification for the device. */ //@{ #define BP_SIM_UIDMH_UID (0U) //!< Bit position for SIM_UIDMH_UID. #define BM_SIM_UIDMH_UID (0xFFFFFFFFU) //!< Bit mask for SIM_UIDMH_UID. #define BS_SIM_UIDMH_UID (32U) //!< Bit field size in bits for SIM_UIDMH_UID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_UIDMH_UID field. #define BR_SIM_UIDMH_UID (HW_SIM_UIDMH.U) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_UIDML - Unique Identification Register Mid Low //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_UIDML - Unique Identification Register Mid Low (RO) * * Reset value: 0x00000000U */ typedef union _hw_sim_uidml { uint32_t U; struct _hw_sim_uidml_bitfields { uint32_t UID : 32; //!< [31:0] Unique Identification } B; } hw_sim_uidml_t; #endif /*! * @name Constants and macros for entire SIM_UIDML register */ //@{ #define HW_SIM_UIDML_ADDR (REGS_SIM_BASE + 0x105CU) #ifndef __LANGUAGE_ASM__ #define HW_SIM_UIDML (*(__I hw_sim_uidml_t *) HW_SIM_UIDML_ADDR) #define HW_SIM_UIDML_RD() (HW_SIM_UIDML.U) #endif //@} /* * Constants & macros for individual SIM_UIDML bitfields */ /*! * @name Register SIM_UIDML, field UID[31:0] (RO) * * Unique identification for the device. */ //@{ #define BP_SIM_UIDML_UID (0U) //!< Bit position for SIM_UIDML_UID. #define BM_SIM_UIDML_UID (0xFFFFFFFFU) //!< Bit mask for SIM_UIDML_UID. #define BS_SIM_UIDML_UID (32U) //!< Bit field size in bits for SIM_UIDML_UID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_UIDML_UID field. #define BR_SIM_UIDML_UID (HW_SIM_UIDML.U) #endif //@} //------------------------------------------------------------------------------------------- // HW_SIM_UIDL - Unique Identification Register Low //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_SIM_UIDL - Unique Identification Register Low (RO) * * Reset value: 0x00000000U */ typedef union _hw_sim_uidl { uint32_t U; struct _hw_sim_uidl_bitfields { uint32_t UID : 32; //!< [31:0] Unique Identification } B; } hw_sim_uidl_t; #endif /*! * @name Constants and macros for entire SIM_UIDL register */ //@{ #define HW_SIM_UIDL_ADDR (REGS_SIM_BASE + 0x1060U) #ifndef __LANGUAGE_ASM__ #define HW_SIM_UIDL (*(__I hw_sim_uidl_t *) HW_SIM_UIDL_ADDR) #define HW_SIM_UIDL_RD() (HW_SIM_UIDL.U) #endif //@} /* * Constants & macros for individual SIM_UIDL bitfields */ /*! * @name Register SIM_UIDL, field UID[31:0] (RO) * * Unique identification for the device. */ //@{ #define BP_SIM_UIDL_UID (0U) //!< Bit position for SIM_UIDL_UID. #define BM_SIM_UIDL_UID (0xFFFFFFFFU) //!< Bit mask for SIM_UIDL_UID. #define BS_SIM_UIDL_UID (32U) //!< Bit field size in bits for SIM_UIDL_UID. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the SIM_UIDL_UID field. #define BR_SIM_UIDL_UID (HW_SIM_UIDL.U) #endif //@} //------------------------------------------------------------------------------------------- // hw_sim_t - module struct //------------------------------------------------------------------------------------------- /*! * @brief All SIM module registers. */ #ifndef __LANGUAGE_ASM__ #pragma pack(1) typedef struct _hw_sim { __IO hw_sim_sopt1_t SOPT1; //!< [0x0] System Options Register 1 __IO hw_sim_sopt1cfg_t SOPT1CFG; //!< [0x4] SOPT1 Configuration Register uint8_t _reserved0[4092]; __IO hw_sim_sopt2_t SOPT2; //!< [0x1004] System Options Register 2 uint8_t _reserved1[4]; __IO hw_sim_sopt4_t SOPT4; //!< [0x100C] System Options Register 4 __IO hw_sim_sopt5_t SOPT5; //!< [0x1010] System Options Register 5 uint8_t _reserved2[4]; __IO hw_sim_sopt7_t SOPT7; //!< [0x1018] System Options Register 7 uint8_t _reserved3[8]; __I hw_sim_sdid_t SDID; //!< [0x1024] System Device Identification Register __IO hw_sim_scgc1_t SCGC1; //!< [0x1028] System Clock Gating Control Register 1 __IO hw_sim_scgc2_t SCGC2; //!< [0x102C] System Clock Gating Control Register 2 __IO hw_sim_scgc3_t SCGC3; //!< [0x1030] System Clock Gating Control Register 3 __IO hw_sim_scgc4_t SCGC4; //!< [0x1034] System Clock Gating Control Register 4 __IO hw_sim_scgc5_t SCGC5; //!< [0x1038] System Clock Gating Control Register 5 __IO hw_sim_scgc6_t SCGC6; //!< [0x103C] System Clock Gating Control Register 6 __IO hw_sim_scgc7_t SCGC7; //!< [0x1040] System Clock Gating Control Register 7 __IO hw_sim_clkdiv1_t CLKDIV1; //!< [0x1044] System Clock Divider Register 1 __IO hw_sim_clkdiv2_t CLKDIV2; //!< [0x1048] System Clock Divider Register 2 __IO hw_sim_fcfg1_t FCFG1; //!< [0x104C] Flash Configuration Register 1 __I hw_sim_fcfg2_t FCFG2; //!< [0x1050] Flash Configuration Register 2 __I hw_sim_uidh_t UIDH; //!< [0x1054] Unique Identification Register High __I hw_sim_uidmh_t UIDMH; //!< [0x1058] Unique Identification Register Mid-High __I hw_sim_uidml_t UIDML; //!< [0x105C] Unique Identification Register Mid Low __I hw_sim_uidl_t UIDL; //!< [0x1060] Unique Identification Register Low } hw_sim_t; #pragma pack() //! @brief Macro to access all SIM registers. //! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, //! use the '&' operator, like <code>&HW_SIM</code>. #define HW_SIM (*(hw_sim_t *) REGS_SIM_BASE) #endif #endif // __HW_SIM_REGISTERS_H__ // v22/130726/0.9 // EOF