mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_aips.h
- Committer:
- mbed_official
- Date:
- 2014-04-02
- Revision:
- 146:f64d43ff0c18
File content as of revision 146:f64d43ff0c18:
/* * Copyright (c) 2014, Freescale Semiconductor, Inc. * All rights reserved. * * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. */ /* * WARNING! DO NOT EDIT THIS FILE DIRECTLY! * * This file was generated automatically and any changes may be lost. */ #ifndef __HW_AIPS_REGISTERS_H__ #define __HW_AIPS_REGISTERS_H__ #include "regs.h" /* * MK64F12 AIPS * * AIPS-Lite Bridge * * Registers defined in this header file: * - HW_AIPS_MPRA - Master Privilege Register A * - HW_AIPS_PACRA - Peripheral Access Control Register * - HW_AIPS_PACRB - Peripheral Access Control Register * - HW_AIPS_PACRC - Peripheral Access Control Register * - HW_AIPS_PACRD - Peripheral Access Control Register * - HW_AIPS_PACRE - Peripheral Access Control Register * - HW_AIPS_PACRF - Peripheral Access Control Register * - HW_AIPS_PACRG - Peripheral Access Control Register * - HW_AIPS_PACRH - Peripheral Access Control Register * - HW_AIPS_PACRI - Peripheral Access Control Register * - HW_AIPS_PACRJ - Peripheral Access Control Register * - HW_AIPS_PACRK - Peripheral Access Control Register * - HW_AIPS_PACRL - Peripheral Access Control Register * - HW_AIPS_PACRM - Peripheral Access Control Register * - HW_AIPS_PACRN - Peripheral Access Control Register * - HW_AIPS_PACRO - Peripheral Access Control Register * - HW_AIPS_PACRP - Peripheral Access Control Register * - HW_AIPS_PACRU - Peripheral Access Control Register * * - hw_aips_t - Struct containing all module registers. */ //! @name Module base addresses //@{ #ifndef REGS_AIPS_BASE #define HW_AIPS_INSTANCE_COUNT (2U) //!< Number of instances of the AIPS module. #define HW_AIPS0 (0U) //!< Instance number for AIPS0. #define HW_AIPS1 (1U) //!< Instance number for AIPS1. #define REGS_AIPS0_BASE (0x40000000U) //!< Base address for AIPS0. #define REGS_AIPS1_BASE (0x40080000U) //!< Base address for AIPS1. //! @brief Table of base addresses for AIPS instances. static const uint32_t __g_regs_AIPS_base_addresses[] = { REGS_AIPS0_BASE, REGS_AIPS1_BASE, }; //! @brief Get the base address of AIPS by instance number. //! @param x AIPS instance number, from 0 through 1. #define REGS_AIPS_BASE(x) (__g_regs_AIPS_base_addresses[(x)]) //! @brief Get the instance number given a base address. //! @param b Base address for an instance of AIPS. #define REGS_AIPS_INSTANCE(b) ((b) == REGS_AIPS0_BASE ? HW_AIPS0 : (b) == REGS_AIPS1_BASE ? HW_AIPS1 : 0) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_MPRA - Master Privilege Register A //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_MPRA - Master Privilege Register A (RW) * * Reset value: 0x77700000U * * The MPRA specifies identical 4-bit fields defining the access-privilege level * associated with a bus master to various peripherals on the chip. The register * provides one field per bus master. At reset, the default value loaded into * the MPRA fields is chip-specific. See the chip configuration details for the * value of a particular device. A register field that maps to an unimplemented * master or peripheral behaves as read-only-zero. Each master is assigned a logical * ID from 0 to 15. See the master logical ID assignment table in the * chip-specific AIPS information. */ typedef union _hw_aips_mpra { uint32_t U; struct _hw_aips_mpra_bitfields { uint32_t RESERVED0 : 8; //!< [7:0] uint32_t MPL5 : 1; //!< [8] Master 5 Privilege Level uint32_t MTW5 : 1; //!< [9] Master 5 Trusted For Writes uint32_t MTR5 : 1; //!< [10] Master 5 Trusted For Read uint32_t RESERVED1 : 1; //!< [11] uint32_t MPL4 : 1; //!< [12] Master 4 Privilege Level uint32_t MTW4 : 1; //!< [13] Master 4 Trusted For Writes uint32_t MTR4 : 1; //!< [14] Master 4 Trusted For Read uint32_t RESERVED2 : 1; //!< [15] uint32_t MPL3 : 1; //!< [16] Master 3 Privilege Level uint32_t MTW3 : 1; //!< [17] Master 3 Trusted For Writes uint32_t MTR3 : 1; //!< [18] Master 3 Trusted For Read uint32_t RESERVED3 : 1; //!< [19] uint32_t MPL2 : 1; //!< [20] Master 2 Privilege Level uint32_t MTW2 : 1; //!< [21] Master 2 Trusted For Writes uint32_t MTR2 : 1; //!< [22] Master 2 Trusted For Read uint32_t RESERVED4 : 1; //!< [23] uint32_t MPL1 : 1; //!< [24] Master 1 Privilege Level uint32_t MTW1 : 1; //!< [25] Master 1 Trusted for Writes uint32_t MTR1 : 1; //!< [26] Master 1 Trusted for Read uint32_t RESERVED5 : 1; //!< [27] uint32_t MPL0 : 1; //!< [28] Master 0 Privilege Level uint32_t MTW0 : 1; //!< [29] Master 0 Trusted For Writes uint32_t MTR0 : 1; //!< [30] Master 0 Trusted For Read uint32_t RESERVED6 : 1; //!< [31] } B; } hw_aips_mpra_t; #endif /*! * @name Constants and macros for entire AIPS_MPRA register */ //@{ #define HW_AIPS_MPRA_ADDR(x) (REGS_AIPS_BASE(x) + 0x0U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_MPRA(x) (*(__IO hw_aips_mpra_t *) HW_AIPS_MPRA_ADDR(x)) #define HW_AIPS_MPRA_RD(x) (HW_AIPS_MPRA(x).U) #define HW_AIPS_MPRA_WR(x, v) (HW_AIPS_MPRA(x).U = (v)) #define HW_AIPS_MPRA_SET(x, v) (HW_AIPS_MPRA_WR(x, HW_AIPS_MPRA_RD(x) | (v))) #define HW_AIPS_MPRA_CLR(x, v) (HW_AIPS_MPRA_WR(x, HW_AIPS_MPRA_RD(x) & ~(v))) #define HW_AIPS_MPRA_TOG(x, v) (HW_AIPS_MPRA_WR(x, HW_AIPS_MPRA_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_MPRA bitfields */ /*! * @name Register AIPS_MPRA, field MPL5[8] (RW) * * Specifies how the privilege level of the master is determined. * * Values: * - 0 - Accesses from this master are forced to user-mode. * - 1 - Accesses from this master are not forced to user-mode. */ //@{ #define BP_AIPS_MPRA_MPL5 (8U) //!< Bit position for AIPS_MPRA_MPL5. #define BM_AIPS_MPRA_MPL5 (0x00000100U) //!< Bit mask for AIPS_MPRA_MPL5. #define BS_AIPS_MPRA_MPL5 (1U) //!< Bit field size in bits for AIPS_MPRA_MPL5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MPL5 field. #define BR_AIPS_MPRA_MPL5(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL5)) #endif //! @brief Format value for bitfield AIPS_MPRA_MPL5. #define BF_AIPS_MPRA_MPL5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MPL5), uint32_t) & BM_AIPS_MPRA_MPL5) #ifndef __LANGUAGE_ASM__ //! @brief Set the MPL5 field to a new value. #define BW_AIPS_MPRA_MPL5(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL5) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTW5[9] (RW) * * Determines whether the master is trusted for write accesses. * * Values: * - 0 - This master is not trusted for write accesses. * - 1 - This master is trusted for write accesses. */ //@{ #define BP_AIPS_MPRA_MTW5 (9U) //!< Bit position for AIPS_MPRA_MTW5. #define BM_AIPS_MPRA_MTW5 (0x00000200U) //!< Bit mask for AIPS_MPRA_MTW5. #define BS_AIPS_MPRA_MTW5 (1U) //!< Bit field size in bits for AIPS_MPRA_MTW5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTW5 field. #define BR_AIPS_MPRA_MTW5(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW5)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTW5. #define BF_AIPS_MPRA_MTW5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTW5), uint32_t) & BM_AIPS_MPRA_MTW5) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTW5 field to a new value. #define BW_AIPS_MPRA_MTW5(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW5) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTR5[10] (RW) * * Determines whether the master is trusted for read accesses. * * Values: * - 0 - This master is not trusted for read accesses. * - 1 - This master is trusted for read accesses. */ //@{ #define BP_AIPS_MPRA_MTR5 (10U) //!< Bit position for AIPS_MPRA_MTR5. #define BM_AIPS_MPRA_MTR5 (0x00000400U) //!< Bit mask for AIPS_MPRA_MTR5. #define BS_AIPS_MPRA_MTR5 (1U) //!< Bit field size in bits for AIPS_MPRA_MTR5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTR5 field. #define BR_AIPS_MPRA_MTR5(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR5)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTR5. #define BF_AIPS_MPRA_MTR5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTR5), uint32_t) & BM_AIPS_MPRA_MTR5) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTR5 field to a new value. #define BW_AIPS_MPRA_MTR5(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR5) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MPL4[12] (RW) * * Specifies how the privilege level of the master is determined. * * Values: * - 0 - Accesses from this master are forced to user-mode. * - 1 - Accesses from this master are not forced to user-mode. */ //@{ #define BP_AIPS_MPRA_MPL4 (12U) //!< Bit position for AIPS_MPRA_MPL4. #define BM_AIPS_MPRA_MPL4 (0x00001000U) //!< Bit mask for AIPS_MPRA_MPL4. #define BS_AIPS_MPRA_MPL4 (1U) //!< Bit field size in bits for AIPS_MPRA_MPL4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MPL4 field. #define BR_AIPS_MPRA_MPL4(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL4)) #endif //! @brief Format value for bitfield AIPS_MPRA_MPL4. #define BF_AIPS_MPRA_MPL4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MPL4), uint32_t) & BM_AIPS_MPRA_MPL4) #ifndef __LANGUAGE_ASM__ //! @brief Set the MPL4 field to a new value. #define BW_AIPS_MPRA_MPL4(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL4) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTW4[13] (RW) * * Determines whether the master is trusted for write accesses. * * Values: * - 0 - This master is not trusted for write accesses. * - 1 - This master is trusted for write accesses. */ //@{ #define BP_AIPS_MPRA_MTW4 (13U) //!< Bit position for AIPS_MPRA_MTW4. #define BM_AIPS_MPRA_MTW4 (0x00002000U) //!< Bit mask for AIPS_MPRA_MTW4. #define BS_AIPS_MPRA_MTW4 (1U) //!< Bit field size in bits for AIPS_MPRA_MTW4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTW4 field. #define BR_AIPS_MPRA_MTW4(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW4)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTW4. #define BF_AIPS_MPRA_MTW4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTW4), uint32_t) & BM_AIPS_MPRA_MTW4) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTW4 field to a new value. #define BW_AIPS_MPRA_MTW4(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW4) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTR4[14] (RW) * * Determines whether the master is trusted for read accesses. * * Values: * - 0 - This master is not trusted for read accesses. * - 1 - This master is trusted for read accesses. */ //@{ #define BP_AIPS_MPRA_MTR4 (14U) //!< Bit position for AIPS_MPRA_MTR4. #define BM_AIPS_MPRA_MTR4 (0x00004000U) //!< Bit mask for AIPS_MPRA_MTR4. #define BS_AIPS_MPRA_MTR4 (1U) //!< Bit field size in bits for AIPS_MPRA_MTR4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTR4 field. #define BR_AIPS_MPRA_MTR4(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR4)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTR4. #define BF_AIPS_MPRA_MTR4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTR4), uint32_t) & BM_AIPS_MPRA_MTR4) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTR4 field to a new value. #define BW_AIPS_MPRA_MTR4(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR4) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MPL3[16] (RW) * * Specifies how the privilege level of the master is determined. * * Values: * - 0 - Accesses from this master are forced to user-mode. * - 1 - Accesses from this master are not forced to user-mode. */ //@{ #define BP_AIPS_MPRA_MPL3 (16U) //!< Bit position for AIPS_MPRA_MPL3. #define BM_AIPS_MPRA_MPL3 (0x00010000U) //!< Bit mask for AIPS_MPRA_MPL3. #define BS_AIPS_MPRA_MPL3 (1U) //!< Bit field size in bits for AIPS_MPRA_MPL3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MPL3 field. #define BR_AIPS_MPRA_MPL3(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL3)) #endif //! @brief Format value for bitfield AIPS_MPRA_MPL3. #define BF_AIPS_MPRA_MPL3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MPL3), uint32_t) & BM_AIPS_MPRA_MPL3) #ifndef __LANGUAGE_ASM__ //! @brief Set the MPL3 field to a new value. #define BW_AIPS_MPRA_MPL3(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL3) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTW3[17] (RW) * * Determines whether the master is trusted for write accesses. * * Values: * - 0 - This master is not trusted for write accesses. * - 1 - This master is trusted for write accesses. */ //@{ #define BP_AIPS_MPRA_MTW3 (17U) //!< Bit position for AIPS_MPRA_MTW3. #define BM_AIPS_MPRA_MTW3 (0x00020000U) //!< Bit mask for AIPS_MPRA_MTW3. #define BS_AIPS_MPRA_MTW3 (1U) //!< Bit field size in bits for AIPS_MPRA_MTW3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTW3 field. #define BR_AIPS_MPRA_MTW3(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW3)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTW3. #define BF_AIPS_MPRA_MTW3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTW3), uint32_t) & BM_AIPS_MPRA_MTW3) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTW3 field to a new value. #define BW_AIPS_MPRA_MTW3(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW3) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTR3[18] (RW) * * Determines whether the master is trusted for read accesses. * * Values: * - 0 - This master is not trusted for read accesses. * - 1 - This master is trusted for read accesses. */ //@{ #define BP_AIPS_MPRA_MTR3 (18U) //!< Bit position for AIPS_MPRA_MTR3. #define BM_AIPS_MPRA_MTR3 (0x00040000U) //!< Bit mask for AIPS_MPRA_MTR3. #define BS_AIPS_MPRA_MTR3 (1U) //!< Bit field size in bits for AIPS_MPRA_MTR3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTR3 field. #define BR_AIPS_MPRA_MTR3(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR3)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTR3. #define BF_AIPS_MPRA_MTR3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTR3), uint32_t) & BM_AIPS_MPRA_MTR3) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTR3 field to a new value. #define BW_AIPS_MPRA_MTR3(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR3) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MPL2[20] (RW) * * Specifies how the privilege level of the master is determined. * * Values: * - 0 - Accesses from this master are forced to user-mode. * - 1 - Accesses from this master are not forced to user-mode. */ //@{ #define BP_AIPS_MPRA_MPL2 (20U) //!< Bit position for AIPS_MPRA_MPL2. #define BM_AIPS_MPRA_MPL2 (0x00100000U) //!< Bit mask for AIPS_MPRA_MPL2. #define BS_AIPS_MPRA_MPL2 (1U) //!< Bit field size in bits for AIPS_MPRA_MPL2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MPL2 field. #define BR_AIPS_MPRA_MPL2(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL2)) #endif //! @brief Format value for bitfield AIPS_MPRA_MPL2. #define BF_AIPS_MPRA_MPL2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MPL2), uint32_t) & BM_AIPS_MPRA_MPL2) #ifndef __LANGUAGE_ASM__ //! @brief Set the MPL2 field to a new value. #define BW_AIPS_MPRA_MPL2(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL2) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTW2[21] (RW) * * Determines whether the master is trusted for write accesses. * * Values: * - 0 - This master is not trusted for write accesses. * - 1 - This master is trusted for write accesses. */ //@{ #define BP_AIPS_MPRA_MTW2 (21U) //!< Bit position for AIPS_MPRA_MTW2. #define BM_AIPS_MPRA_MTW2 (0x00200000U) //!< Bit mask for AIPS_MPRA_MTW2. #define BS_AIPS_MPRA_MTW2 (1U) //!< Bit field size in bits for AIPS_MPRA_MTW2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTW2 field. #define BR_AIPS_MPRA_MTW2(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW2)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTW2. #define BF_AIPS_MPRA_MTW2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTW2), uint32_t) & BM_AIPS_MPRA_MTW2) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTW2 field to a new value. #define BW_AIPS_MPRA_MTW2(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW2) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTR2[22] (RW) * * Determines whether the master is trusted for read accesses. * * Values: * - 0 - This master is not trusted for read accesses. * - 1 - This master is trusted for read accesses. */ //@{ #define BP_AIPS_MPRA_MTR2 (22U) //!< Bit position for AIPS_MPRA_MTR2. #define BM_AIPS_MPRA_MTR2 (0x00400000U) //!< Bit mask for AIPS_MPRA_MTR2. #define BS_AIPS_MPRA_MTR2 (1U) //!< Bit field size in bits for AIPS_MPRA_MTR2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTR2 field. #define BR_AIPS_MPRA_MTR2(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR2)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTR2. #define BF_AIPS_MPRA_MTR2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTR2), uint32_t) & BM_AIPS_MPRA_MTR2) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTR2 field to a new value. #define BW_AIPS_MPRA_MTR2(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR2) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MPL1[24] (RW) * * Specifies how the privilege level of the master is determined. * * Values: * - 0 - Accesses from this master are forced to user-mode. * - 1 - Accesses from this master are not forced to user-mode. */ //@{ #define BP_AIPS_MPRA_MPL1 (24U) //!< Bit position for AIPS_MPRA_MPL1. #define BM_AIPS_MPRA_MPL1 (0x01000000U) //!< Bit mask for AIPS_MPRA_MPL1. #define BS_AIPS_MPRA_MPL1 (1U) //!< Bit field size in bits for AIPS_MPRA_MPL1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MPL1 field. #define BR_AIPS_MPRA_MPL1(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL1)) #endif //! @brief Format value for bitfield AIPS_MPRA_MPL1. #define BF_AIPS_MPRA_MPL1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MPL1), uint32_t) & BM_AIPS_MPRA_MPL1) #ifndef __LANGUAGE_ASM__ //! @brief Set the MPL1 field to a new value. #define BW_AIPS_MPRA_MPL1(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL1) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTW1[25] (RW) * * Determines whether the master is trusted for write accesses. * * Values: * - 0 - This master is not trusted for write accesses. * - 1 - This master is trusted for write accesses. */ //@{ #define BP_AIPS_MPRA_MTW1 (25U) //!< Bit position for AIPS_MPRA_MTW1. #define BM_AIPS_MPRA_MTW1 (0x02000000U) //!< Bit mask for AIPS_MPRA_MTW1. #define BS_AIPS_MPRA_MTW1 (1U) //!< Bit field size in bits for AIPS_MPRA_MTW1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTW1 field. #define BR_AIPS_MPRA_MTW1(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW1)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTW1. #define BF_AIPS_MPRA_MTW1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTW1), uint32_t) & BM_AIPS_MPRA_MTW1) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTW1 field to a new value. #define BW_AIPS_MPRA_MTW1(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW1) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTR1[26] (RW) * * Determines whether the master is trusted for read accesses. * * Values: * - 0 - This master is not trusted for read accesses. * - 1 - This master is trusted for read accesses. */ //@{ #define BP_AIPS_MPRA_MTR1 (26U) //!< Bit position for AIPS_MPRA_MTR1. #define BM_AIPS_MPRA_MTR1 (0x04000000U) //!< Bit mask for AIPS_MPRA_MTR1. #define BS_AIPS_MPRA_MTR1 (1U) //!< Bit field size in bits for AIPS_MPRA_MTR1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTR1 field. #define BR_AIPS_MPRA_MTR1(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR1)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTR1. #define BF_AIPS_MPRA_MTR1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTR1), uint32_t) & BM_AIPS_MPRA_MTR1) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTR1 field to a new value. #define BW_AIPS_MPRA_MTR1(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR1) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MPL0[28] (RW) * * Specifies how the privilege level of the master is determined. * * Values: * - 0 - Accesses from this master are forced to user-mode. * - 1 - Accesses from this master are not forced to user-mode. */ //@{ #define BP_AIPS_MPRA_MPL0 (28U) //!< Bit position for AIPS_MPRA_MPL0. #define BM_AIPS_MPRA_MPL0 (0x10000000U) //!< Bit mask for AIPS_MPRA_MPL0. #define BS_AIPS_MPRA_MPL0 (1U) //!< Bit field size in bits for AIPS_MPRA_MPL0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MPL0 field. #define BR_AIPS_MPRA_MPL0(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL0)) #endif //! @brief Format value for bitfield AIPS_MPRA_MPL0. #define BF_AIPS_MPRA_MPL0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MPL0), uint32_t) & BM_AIPS_MPRA_MPL0) #ifndef __LANGUAGE_ASM__ //! @brief Set the MPL0 field to a new value. #define BW_AIPS_MPRA_MPL0(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MPL0) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTW0[29] (RW) * * Determines whether the master is trusted for write accesses. * * Values: * - 0 - This master is not trusted for write accesses. * - 1 - This master is trusted for write accesses. */ //@{ #define BP_AIPS_MPRA_MTW0 (29U) //!< Bit position for AIPS_MPRA_MTW0. #define BM_AIPS_MPRA_MTW0 (0x20000000U) //!< Bit mask for AIPS_MPRA_MTW0. #define BS_AIPS_MPRA_MTW0 (1U) //!< Bit field size in bits for AIPS_MPRA_MTW0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTW0 field. #define BR_AIPS_MPRA_MTW0(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW0)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTW0. #define BF_AIPS_MPRA_MTW0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTW0), uint32_t) & BM_AIPS_MPRA_MTW0) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTW0 field to a new value. #define BW_AIPS_MPRA_MTW0(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTW0) = (v)) #endif //@} /*! * @name Register AIPS_MPRA, field MTR0[30] (RW) * * Determines whether the master is trusted for read accesses. * * Values: * - 0 - This master is not trusted for read accesses. * - 1 - This master is trusted for read accesses. */ //@{ #define BP_AIPS_MPRA_MTR0 (30U) //!< Bit position for AIPS_MPRA_MTR0. #define BM_AIPS_MPRA_MTR0 (0x40000000U) //!< Bit mask for AIPS_MPRA_MTR0. #define BS_AIPS_MPRA_MTR0 (1U) //!< Bit field size in bits for AIPS_MPRA_MTR0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_MPRA_MTR0 field. #define BR_AIPS_MPRA_MTR0(x) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR0)) #endif //! @brief Format value for bitfield AIPS_MPRA_MTR0. #define BF_AIPS_MPRA_MTR0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_MPRA_MTR0), uint32_t) & BM_AIPS_MPRA_MTR0) #ifndef __LANGUAGE_ASM__ //! @brief Set the MTR0 field to a new value. #define BW_AIPS_MPRA_MTR0(x, v) (BITBAND_ACCESS32(HW_AIPS_MPRA_ADDR(x), BP_AIPS_MPRA_MTR0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRA - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRA - Peripheral Access Control Register (RW) * * Reset value: 0x50004000U * * Each PACR register consists of eight 4-bit PACR fields. Each PACR field * defines the access levels for a particular peripheral. The mapping between a * peripheral and its PACR field is shown in the table below. The peripheral assignment * to each PACR is defined by the memory map slot that the peripheral is * assigned to. See this chip's memory map for the assignment of a particular * peripheral. The following table shows the location of each peripheral slot's PACR field * in the PACR registers. Offset Register [31:28] [27:24] [23:20] [19:16] [15:12] * [11:8] [7:4] [3:0] 0x20 PACRA PACR0 PACR1 PACR2 PACR3 PACR4 PACR5 PACR6 PACR7 * 0x24 PACRB PACR8 PACR9 PACR10 PACR11 PACR12 PACR13 PACR14 PACR15 0x28 PACRC * PACR16 PACR17 PACR18 PACR19 PACR20 PACR21 PACR22 PACR23 0x2C PACRD PACR24 * PACR25 PACR26 PACR27 PACR28 PACR29 PACR30 PACR31 0x30 Reserved 0x34 Reserved 0x38 * Reserved 0x3C Reserved 0x40 PACRE PACR32 PACR33 PACR34 PACR35 PACR36 PACR37 * PACR38 PACR39 0x44 PACRF PACR40 PACR41 PACR42 PACR43 PACR44 PACR45 PACR46 PACR47 * 0x48 PACRG PACR48 PACR49 PACR50 PACR51 PACR52 PACR53 PACR54 PACR55 0x4C PACRH * PACR56 PACR57 PACR58 PACR59 PACR60 PACR61 PACR62 PACR63 0x50 PACRI PACR64 * PACR65 PACR66 PACR67 PACR68 PACR69 PACR70 PACR71 0x54 PACRJ PACR72 PACR73 PACR74 * PACR75 PACR76 PACR77 PACR78 PACR79 0x58 PACRK PACR80 PACR81 PACR82 PACR83 * PACR84 PACR85 PACR86 PACR87 0x5C PACRL PACR88 PACR89 PACR90 PACR91 PACR92 PACR93 * PACR94 PACR95 0x60 PACRM PACR96 PACR97 PACR98 PACR99 PACR100 PACR101 PACR102 * PACR103 0x64 PACRN PACR104 PACR105 PACR106 PACR107 PACR108 PACR109 PACR110 * PACR111 0x68 PACRO PACR112 PACR113 PACR114 PACR115 PACR116 PACR117 PACR118 PACR119 * 0x6C PACRP PACR120 PACR121 PACR122 PACR123 PACR124 PACR125 PACR126 PACR127 0x80 * PACRU PACR GBL0 PACR GBL1 Reserved The register field descriptions for PACR * A-D, which control peripheral slots 0-31, are shown below. The following * section, PACRPeripheral Access Control Register , shows the register field * descriptions for PACR E-P. All PACR registers are identical. They are divided into two * sections because they occupy two non-contiguous address spaces. */ typedef union _hw_aips_pacra { uint32_t U; struct _hw_aips_pacra_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacra_t; #endif /*! * @name Constants and macros for entire AIPS_PACRA register */ //@{ #define HW_AIPS_PACRA_ADDR(x) (REGS_AIPS_BASE(x) + 0x20U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRA(x) (*(__IO hw_aips_pacra_t *) HW_AIPS_PACRA_ADDR(x)) #define HW_AIPS_PACRA_RD(x) (HW_AIPS_PACRA(x).U) #define HW_AIPS_PACRA_WR(x, v) (HW_AIPS_PACRA(x).U = (v)) #define HW_AIPS_PACRA_SET(x, v) (HW_AIPS_PACRA_WR(x, HW_AIPS_PACRA_RD(x) | (v))) #define HW_AIPS_PACRA_CLR(x, v) (HW_AIPS_PACRA_WR(x, HW_AIPS_PACRA_RD(x) & ~(v))) #define HW_AIPS_PACRA_TOG(x, v) (HW_AIPS_PACRA_WR(x, HW_AIPS_PACRA_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRA bitfields */ /*! * @name Register AIPS_PACRA, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRA_TP7 (0U) //!< Bit position for AIPS_PACRA_TP7. #define BM_AIPS_PACRA_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRA_TP7. #define BS_AIPS_PACRA_TP7 (1U) //!< Bit field size in bits for AIPS_PACRA_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_TP7 field. #define BR_AIPS_PACRA_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRA_TP7. #define BF_AIPS_PACRA_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP7), uint32_t) & BM_AIPS_PACRA_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRA_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRA_WP7 (1U) //!< Bit position for AIPS_PACRA_WP7. #define BM_AIPS_PACRA_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRA_WP7. #define BS_AIPS_PACRA_WP7 (1U) //!< Bit field size in bits for AIPS_PACRA_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_WP7 field. #define BR_AIPS_PACRA_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRA_WP7. #define BF_AIPS_PACRA_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP7), uint32_t) & BM_AIPS_PACRA_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRA_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRA_SP7 (2U) //!< Bit position for AIPS_PACRA_SP7. #define BM_AIPS_PACRA_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRA_SP7. #define BS_AIPS_PACRA_SP7 (1U) //!< Bit field size in bits for AIPS_PACRA_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_SP7 field. #define BR_AIPS_PACRA_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRA_SP7. #define BF_AIPS_PACRA_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP7), uint32_t) & BM_AIPS_PACRA_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRA_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRA_TP6 (4U) //!< Bit position for AIPS_PACRA_TP6. #define BM_AIPS_PACRA_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRA_TP6. #define BS_AIPS_PACRA_TP6 (1U) //!< Bit field size in bits for AIPS_PACRA_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_TP6 field. #define BR_AIPS_PACRA_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRA_TP6. #define BF_AIPS_PACRA_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP6), uint32_t) & BM_AIPS_PACRA_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRA_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRA_WP6 (5U) //!< Bit position for AIPS_PACRA_WP6. #define BM_AIPS_PACRA_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRA_WP6. #define BS_AIPS_PACRA_WP6 (1U) //!< Bit field size in bits for AIPS_PACRA_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_WP6 field. #define BR_AIPS_PACRA_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRA_WP6. #define BF_AIPS_PACRA_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP6), uint32_t) & BM_AIPS_PACRA_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRA_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRA_SP6 (6U) //!< Bit position for AIPS_PACRA_SP6. #define BM_AIPS_PACRA_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRA_SP6. #define BS_AIPS_PACRA_SP6 (1U) //!< Bit field size in bits for AIPS_PACRA_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_SP6 field. #define BR_AIPS_PACRA_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRA_SP6. #define BF_AIPS_PACRA_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP6), uint32_t) & BM_AIPS_PACRA_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRA_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRA_TP5 (8U) //!< Bit position for AIPS_PACRA_TP5. #define BM_AIPS_PACRA_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRA_TP5. #define BS_AIPS_PACRA_TP5 (1U) //!< Bit field size in bits for AIPS_PACRA_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_TP5 field. #define BR_AIPS_PACRA_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRA_TP5. #define BF_AIPS_PACRA_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP5), uint32_t) & BM_AIPS_PACRA_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRA_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRA_WP5 (9U) //!< Bit position for AIPS_PACRA_WP5. #define BM_AIPS_PACRA_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRA_WP5. #define BS_AIPS_PACRA_WP5 (1U) //!< Bit field size in bits for AIPS_PACRA_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_WP5 field. #define BR_AIPS_PACRA_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRA_WP5. #define BF_AIPS_PACRA_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP5), uint32_t) & BM_AIPS_PACRA_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRA_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRA_SP5 (10U) //!< Bit position for AIPS_PACRA_SP5. #define BM_AIPS_PACRA_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRA_SP5. #define BS_AIPS_PACRA_SP5 (1U) //!< Bit field size in bits for AIPS_PACRA_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_SP5 field. #define BR_AIPS_PACRA_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRA_SP5. #define BF_AIPS_PACRA_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP5), uint32_t) & BM_AIPS_PACRA_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRA_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRA_TP4 (12U) //!< Bit position for AIPS_PACRA_TP4. #define BM_AIPS_PACRA_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRA_TP4. #define BS_AIPS_PACRA_TP4 (1U) //!< Bit field size in bits for AIPS_PACRA_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_TP4 field. #define BR_AIPS_PACRA_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRA_TP4. #define BF_AIPS_PACRA_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP4), uint32_t) & BM_AIPS_PACRA_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRA_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field WP4[13] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRA_WP4 (13U) //!< Bit position for AIPS_PACRA_WP4. #define BM_AIPS_PACRA_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRA_WP4. #define BS_AIPS_PACRA_WP4 (1U) //!< Bit field size in bits for AIPS_PACRA_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_WP4 field. #define BR_AIPS_PACRA_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRA_WP4. #define BF_AIPS_PACRA_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP4), uint32_t) & BM_AIPS_PACRA_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRA_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRA_SP4 (14U) //!< Bit position for AIPS_PACRA_SP4. #define BM_AIPS_PACRA_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRA_SP4. #define BS_AIPS_PACRA_SP4 (1U) //!< Bit field size in bits for AIPS_PACRA_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_SP4 field. #define BR_AIPS_PACRA_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRA_SP4. #define BF_AIPS_PACRA_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP4), uint32_t) & BM_AIPS_PACRA_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRA_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRA_TP3 (16U) //!< Bit position for AIPS_PACRA_TP3. #define BM_AIPS_PACRA_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRA_TP3. #define BS_AIPS_PACRA_TP3 (1U) //!< Bit field size in bits for AIPS_PACRA_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_TP3 field. #define BR_AIPS_PACRA_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRA_TP3. #define BF_AIPS_PACRA_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP3), uint32_t) & BM_AIPS_PACRA_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRA_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field WP3[17] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRA_WP3 (17U) //!< Bit position for AIPS_PACRA_WP3. #define BM_AIPS_PACRA_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRA_WP3. #define BS_AIPS_PACRA_WP3 (1U) //!< Bit field size in bits for AIPS_PACRA_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_WP3 field. #define BR_AIPS_PACRA_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRA_WP3. #define BF_AIPS_PACRA_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP3), uint32_t) & BM_AIPS_PACRA_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRA_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRA_SP3 (18U) //!< Bit position for AIPS_PACRA_SP3. #define BM_AIPS_PACRA_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRA_SP3. #define BS_AIPS_PACRA_SP3 (1U) //!< Bit field size in bits for AIPS_PACRA_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_SP3 field. #define BR_AIPS_PACRA_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRA_SP3. #define BF_AIPS_PACRA_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP3), uint32_t) & BM_AIPS_PACRA_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRA_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRA_TP2 (20U) //!< Bit position for AIPS_PACRA_TP2. #define BM_AIPS_PACRA_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRA_TP2. #define BS_AIPS_PACRA_TP2 (1U) //!< Bit field size in bits for AIPS_PACRA_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_TP2 field. #define BR_AIPS_PACRA_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRA_TP2. #define BF_AIPS_PACRA_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP2), uint32_t) & BM_AIPS_PACRA_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRA_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field WP2[21] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRA_WP2 (21U) //!< Bit position for AIPS_PACRA_WP2. #define BM_AIPS_PACRA_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRA_WP2. #define BS_AIPS_PACRA_WP2 (1U) //!< Bit field size in bits for AIPS_PACRA_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_WP2 field. #define BR_AIPS_PACRA_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRA_WP2. #define BF_AIPS_PACRA_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP2), uint32_t) & BM_AIPS_PACRA_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRA_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRA_SP2 (22U) //!< Bit position for AIPS_PACRA_SP2. #define BM_AIPS_PACRA_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRA_SP2. #define BS_AIPS_PACRA_SP2 (1U) //!< Bit field size in bits for AIPS_PACRA_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_SP2 field. #define BR_AIPS_PACRA_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRA_SP2. #define BF_AIPS_PACRA_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP2), uint32_t) & BM_AIPS_PACRA_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRA_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRA_TP1 (24U) //!< Bit position for AIPS_PACRA_TP1. #define BM_AIPS_PACRA_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRA_TP1. #define BS_AIPS_PACRA_TP1 (1U) //!< Bit field size in bits for AIPS_PACRA_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_TP1 field. #define BR_AIPS_PACRA_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRA_TP1. #define BF_AIPS_PACRA_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP1), uint32_t) & BM_AIPS_PACRA_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRA_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRA_WP1 (25U) //!< Bit position for AIPS_PACRA_WP1. #define BM_AIPS_PACRA_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRA_WP1. #define BS_AIPS_PACRA_WP1 (1U) //!< Bit field size in bits for AIPS_PACRA_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_WP1 field. #define BR_AIPS_PACRA_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRA_WP1. #define BF_AIPS_PACRA_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP1), uint32_t) & BM_AIPS_PACRA_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRA_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRA_SP1 (26U) //!< Bit position for AIPS_PACRA_SP1. #define BM_AIPS_PACRA_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRA_SP1. #define BS_AIPS_PACRA_SP1 (1U) //!< Bit field size in bits for AIPS_PACRA_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_SP1 field. #define BR_AIPS_PACRA_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRA_SP1. #define BF_AIPS_PACRA_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP1), uint32_t) & BM_AIPS_PACRA_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRA_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRA_TP0 (28U) //!< Bit position for AIPS_PACRA_TP0. #define BM_AIPS_PACRA_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRA_TP0. #define BS_AIPS_PACRA_TP0 (1U) //!< Bit field size in bits for AIPS_PACRA_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_TP0 field. #define BR_AIPS_PACRA_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRA_TP0. #define BF_AIPS_PACRA_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP0), uint32_t) & BM_AIPS_PACRA_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRA_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field WP0[29] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRA_WP0 (29U) //!< Bit position for AIPS_PACRA_WP0. #define BM_AIPS_PACRA_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRA_WP0. #define BS_AIPS_PACRA_WP0 (1U) //!< Bit field size in bits for AIPS_PACRA_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_WP0 field. #define BR_AIPS_PACRA_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRA_WP0. #define BF_AIPS_PACRA_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP0), uint32_t) & BM_AIPS_PACRA_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRA_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRA, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRA_SP0 (30U) //!< Bit position for AIPS_PACRA_SP0. #define BM_AIPS_PACRA_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRA_SP0. #define BS_AIPS_PACRA_SP0 (1U) //!< Bit field size in bits for AIPS_PACRA_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRA_SP0 field. #define BR_AIPS_PACRA_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRA_SP0. #define BF_AIPS_PACRA_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP0), uint32_t) & BM_AIPS_PACRA_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRA_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRB - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRB - Peripheral Access Control Register (RW) * * Reset value: 0x44004400U * * Each PACR register consists of eight 4-bit PACR fields. Each PACR field * defines the access levels for a particular peripheral. The mapping between a * peripheral and its PACR field is shown in the table below. The peripheral assignment * to each PACR is defined by the memory map slot that the peripheral is * assigned to. See this chip's memory map for the assignment of a particular * peripheral. The following table shows the location of each peripheral slot's PACR field * in the PACR registers. Offset Register [31:28] [27:24] [23:20] [19:16] [15:12] * [11:8] [7:4] [3:0] 0x20 PACRA PACR0 PACR1 PACR2 PACR3 PACR4 PACR5 PACR6 PACR7 * 0x24 PACRB PACR8 PACR9 PACR10 PACR11 PACR12 PACR13 PACR14 PACR15 0x28 PACRC * PACR16 PACR17 PACR18 PACR19 PACR20 PACR21 PACR22 PACR23 0x2C PACRD PACR24 * PACR25 PACR26 PACR27 PACR28 PACR29 PACR30 PACR31 0x30 Reserved 0x34 Reserved 0x38 * Reserved 0x3C Reserved 0x40 PACRE PACR32 PACR33 PACR34 PACR35 PACR36 PACR37 * PACR38 PACR39 0x44 PACRF PACR40 PACR41 PACR42 PACR43 PACR44 PACR45 PACR46 PACR47 * 0x48 PACRG PACR48 PACR49 PACR50 PACR51 PACR52 PACR53 PACR54 PACR55 0x4C PACRH * PACR56 PACR57 PACR58 PACR59 PACR60 PACR61 PACR62 PACR63 0x50 PACRI PACR64 * PACR65 PACR66 PACR67 PACR68 PACR69 PACR70 PACR71 0x54 PACRJ PACR72 PACR73 PACR74 * PACR75 PACR76 PACR77 PACR78 PACR79 0x58 PACRK PACR80 PACR81 PACR82 PACR83 * PACR84 PACR85 PACR86 PACR87 0x5C PACRL PACR88 PACR89 PACR90 PACR91 PACR92 PACR93 * PACR94 PACR95 0x60 PACRM PACR96 PACR97 PACR98 PACR99 PACR100 PACR101 PACR102 * PACR103 0x64 PACRN PACR104 PACR105 PACR106 PACR107 PACR108 PACR109 PACR110 * PACR111 0x68 PACRO PACR112 PACR113 PACR114 PACR115 PACR116 PACR117 PACR118 PACR119 * 0x6C PACRP PACR120 PACR121 PACR122 PACR123 PACR124 PACR125 PACR126 PACR127 0x80 * PACRU PACR GBL0 PACR GBL1 Reserved The register field descriptions for PACR * A-D, which control peripheral slots 0-31, are shown below. The following * section, PACRPeripheral Access Control Register , shows the register field * descriptions for PACR E-P. All PACR registers are identical. They are divided into two * sections because they occupy two non-contiguous address spaces. */ typedef union _hw_aips_pacrb { uint32_t U; struct _hw_aips_pacrb_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrb_t; #endif /*! * @name Constants and macros for entire AIPS_PACRB register */ //@{ #define HW_AIPS_PACRB_ADDR(x) (REGS_AIPS_BASE(x) + 0x24U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRB(x) (*(__IO hw_aips_pacrb_t *) HW_AIPS_PACRB_ADDR(x)) #define HW_AIPS_PACRB_RD(x) (HW_AIPS_PACRB(x).U) #define HW_AIPS_PACRB_WR(x, v) (HW_AIPS_PACRB(x).U = (v)) #define HW_AIPS_PACRB_SET(x, v) (HW_AIPS_PACRB_WR(x, HW_AIPS_PACRB_RD(x) | (v))) #define HW_AIPS_PACRB_CLR(x, v) (HW_AIPS_PACRB_WR(x, HW_AIPS_PACRB_RD(x) & ~(v))) #define HW_AIPS_PACRB_TOG(x, v) (HW_AIPS_PACRB_WR(x, HW_AIPS_PACRB_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRB bitfields */ /*! * @name Register AIPS_PACRB, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRB_TP7 (0U) //!< Bit position for AIPS_PACRB_TP7. #define BM_AIPS_PACRB_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRB_TP7. #define BS_AIPS_PACRB_TP7 (1U) //!< Bit field size in bits for AIPS_PACRB_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_TP7 field. #define BR_AIPS_PACRB_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRB_TP7. #define BF_AIPS_PACRB_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP7), uint32_t) & BM_AIPS_PACRB_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRB_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRB_WP7 (1U) //!< Bit position for AIPS_PACRB_WP7. #define BM_AIPS_PACRB_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRB_WP7. #define BS_AIPS_PACRB_WP7 (1U) //!< Bit field size in bits for AIPS_PACRB_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_WP7 field. #define BR_AIPS_PACRB_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRB_WP7. #define BF_AIPS_PACRB_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP7), uint32_t) & BM_AIPS_PACRB_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRB_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRB_SP7 (2U) //!< Bit position for AIPS_PACRB_SP7. #define BM_AIPS_PACRB_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRB_SP7. #define BS_AIPS_PACRB_SP7 (1U) //!< Bit field size in bits for AIPS_PACRB_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_SP7 field. #define BR_AIPS_PACRB_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRB_SP7. #define BF_AIPS_PACRB_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP7), uint32_t) & BM_AIPS_PACRB_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRB_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRB_TP6 (4U) //!< Bit position for AIPS_PACRB_TP6. #define BM_AIPS_PACRB_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRB_TP6. #define BS_AIPS_PACRB_TP6 (1U) //!< Bit field size in bits for AIPS_PACRB_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_TP6 field. #define BR_AIPS_PACRB_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRB_TP6. #define BF_AIPS_PACRB_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP6), uint32_t) & BM_AIPS_PACRB_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRB_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRB_WP6 (5U) //!< Bit position for AIPS_PACRB_WP6. #define BM_AIPS_PACRB_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRB_WP6. #define BS_AIPS_PACRB_WP6 (1U) //!< Bit field size in bits for AIPS_PACRB_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_WP6 field. #define BR_AIPS_PACRB_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRB_WP6. #define BF_AIPS_PACRB_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP6), uint32_t) & BM_AIPS_PACRB_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRB_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRB_SP6 (6U) //!< Bit position for AIPS_PACRB_SP6. #define BM_AIPS_PACRB_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRB_SP6. #define BS_AIPS_PACRB_SP6 (1U) //!< Bit field size in bits for AIPS_PACRB_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_SP6 field. #define BR_AIPS_PACRB_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRB_SP6. #define BF_AIPS_PACRB_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP6), uint32_t) & BM_AIPS_PACRB_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRB_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRB_TP5 (8U) //!< Bit position for AIPS_PACRB_TP5. #define BM_AIPS_PACRB_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRB_TP5. #define BS_AIPS_PACRB_TP5 (1U) //!< Bit field size in bits for AIPS_PACRB_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_TP5 field. #define BR_AIPS_PACRB_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRB_TP5. #define BF_AIPS_PACRB_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP5), uint32_t) & BM_AIPS_PACRB_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRB_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRB_WP5 (9U) //!< Bit position for AIPS_PACRB_WP5. #define BM_AIPS_PACRB_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRB_WP5. #define BS_AIPS_PACRB_WP5 (1U) //!< Bit field size in bits for AIPS_PACRB_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_WP5 field. #define BR_AIPS_PACRB_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRB_WP5. #define BF_AIPS_PACRB_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP5), uint32_t) & BM_AIPS_PACRB_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRB_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRB_SP5 (10U) //!< Bit position for AIPS_PACRB_SP5. #define BM_AIPS_PACRB_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRB_SP5. #define BS_AIPS_PACRB_SP5 (1U) //!< Bit field size in bits for AIPS_PACRB_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_SP5 field. #define BR_AIPS_PACRB_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRB_SP5. #define BF_AIPS_PACRB_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP5), uint32_t) & BM_AIPS_PACRB_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRB_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRB_TP4 (12U) //!< Bit position for AIPS_PACRB_TP4. #define BM_AIPS_PACRB_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRB_TP4. #define BS_AIPS_PACRB_TP4 (1U) //!< Bit field size in bits for AIPS_PACRB_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_TP4 field. #define BR_AIPS_PACRB_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRB_TP4. #define BF_AIPS_PACRB_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP4), uint32_t) & BM_AIPS_PACRB_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRB_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field WP4[13] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRB_WP4 (13U) //!< Bit position for AIPS_PACRB_WP4. #define BM_AIPS_PACRB_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRB_WP4. #define BS_AIPS_PACRB_WP4 (1U) //!< Bit field size in bits for AIPS_PACRB_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_WP4 field. #define BR_AIPS_PACRB_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRB_WP4. #define BF_AIPS_PACRB_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP4), uint32_t) & BM_AIPS_PACRB_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRB_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRB_SP4 (14U) //!< Bit position for AIPS_PACRB_SP4. #define BM_AIPS_PACRB_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRB_SP4. #define BS_AIPS_PACRB_SP4 (1U) //!< Bit field size in bits for AIPS_PACRB_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_SP4 field. #define BR_AIPS_PACRB_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRB_SP4. #define BF_AIPS_PACRB_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP4), uint32_t) & BM_AIPS_PACRB_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRB_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRB_TP3 (16U) //!< Bit position for AIPS_PACRB_TP3. #define BM_AIPS_PACRB_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRB_TP3. #define BS_AIPS_PACRB_TP3 (1U) //!< Bit field size in bits for AIPS_PACRB_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_TP3 field. #define BR_AIPS_PACRB_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRB_TP3. #define BF_AIPS_PACRB_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP3), uint32_t) & BM_AIPS_PACRB_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRB_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field WP3[17] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRB_WP3 (17U) //!< Bit position for AIPS_PACRB_WP3. #define BM_AIPS_PACRB_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRB_WP3. #define BS_AIPS_PACRB_WP3 (1U) //!< Bit field size in bits for AIPS_PACRB_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_WP3 field. #define BR_AIPS_PACRB_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRB_WP3. #define BF_AIPS_PACRB_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP3), uint32_t) & BM_AIPS_PACRB_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRB_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRB_SP3 (18U) //!< Bit position for AIPS_PACRB_SP3. #define BM_AIPS_PACRB_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRB_SP3. #define BS_AIPS_PACRB_SP3 (1U) //!< Bit field size in bits for AIPS_PACRB_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_SP3 field. #define BR_AIPS_PACRB_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRB_SP3. #define BF_AIPS_PACRB_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP3), uint32_t) & BM_AIPS_PACRB_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRB_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRB_TP2 (20U) //!< Bit position for AIPS_PACRB_TP2. #define BM_AIPS_PACRB_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRB_TP2. #define BS_AIPS_PACRB_TP2 (1U) //!< Bit field size in bits for AIPS_PACRB_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_TP2 field. #define BR_AIPS_PACRB_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRB_TP2. #define BF_AIPS_PACRB_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP2), uint32_t) & BM_AIPS_PACRB_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRB_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field WP2[21] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRB_WP2 (21U) //!< Bit position for AIPS_PACRB_WP2. #define BM_AIPS_PACRB_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRB_WP2. #define BS_AIPS_PACRB_WP2 (1U) //!< Bit field size in bits for AIPS_PACRB_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_WP2 field. #define BR_AIPS_PACRB_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRB_WP2. #define BF_AIPS_PACRB_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP2), uint32_t) & BM_AIPS_PACRB_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRB_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRB_SP2 (22U) //!< Bit position for AIPS_PACRB_SP2. #define BM_AIPS_PACRB_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRB_SP2. #define BS_AIPS_PACRB_SP2 (1U) //!< Bit field size in bits for AIPS_PACRB_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_SP2 field. #define BR_AIPS_PACRB_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRB_SP2. #define BF_AIPS_PACRB_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP2), uint32_t) & BM_AIPS_PACRB_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRB_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRB_TP1 (24U) //!< Bit position for AIPS_PACRB_TP1. #define BM_AIPS_PACRB_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRB_TP1. #define BS_AIPS_PACRB_TP1 (1U) //!< Bit field size in bits for AIPS_PACRB_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_TP1 field. #define BR_AIPS_PACRB_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRB_TP1. #define BF_AIPS_PACRB_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP1), uint32_t) & BM_AIPS_PACRB_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRB_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRB_WP1 (25U) //!< Bit position for AIPS_PACRB_WP1. #define BM_AIPS_PACRB_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRB_WP1. #define BS_AIPS_PACRB_WP1 (1U) //!< Bit field size in bits for AIPS_PACRB_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_WP1 field. #define BR_AIPS_PACRB_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRB_WP1. #define BF_AIPS_PACRB_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP1), uint32_t) & BM_AIPS_PACRB_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRB_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRB_SP1 (26U) //!< Bit position for AIPS_PACRB_SP1. #define BM_AIPS_PACRB_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRB_SP1. #define BS_AIPS_PACRB_SP1 (1U) //!< Bit field size in bits for AIPS_PACRB_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_SP1 field. #define BR_AIPS_PACRB_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRB_SP1. #define BF_AIPS_PACRB_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP1), uint32_t) & BM_AIPS_PACRB_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRB_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRB_TP0 (28U) //!< Bit position for AIPS_PACRB_TP0. #define BM_AIPS_PACRB_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRB_TP0. #define BS_AIPS_PACRB_TP0 (1U) //!< Bit field size in bits for AIPS_PACRB_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_TP0 field. #define BR_AIPS_PACRB_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRB_TP0. #define BF_AIPS_PACRB_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP0), uint32_t) & BM_AIPS_PACRB_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRB_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field WP0[29] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRB_WP0 (29U) //!< Bit position for AIPS_PACRB_WP0. #define BM_AIPS_PACRB_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRB_WP0. #define BS_AIPS_PACRB_WP0 (1U) //!< Bit field size in bits for AIPS_PACRB_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_WP0 field. #define BR_AIPS_PACRB_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRB_WP0. #define BF_AIPS_PACRB_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP0), uint32_t) & BM_AIPS_PACRB_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRB_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRB, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRB_SP0 (30U) //!< Bit position for AIPS_PACRB_SP0. #define BM_AIPS_PACRB_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRB_SP0. #define BS_AIPS_PACRB_SP0 (1U) //!< Bit field size in bits for AIPS_PACRB_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRB_SP0 field. #define BR_AIPS_PACRB_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRB_SP0. #define BF_AIPS_PACRB_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP0), uint32_t) & BM_AIPS_PACRB_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRB_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRC - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRC - Peripheral Access Control Register (RW) * * Reset value: 0x00000000U * * Each PACR register consists of eight 4-bit PACR fields. Each PACR field * defines the access levels for a particular peripheral. The mapping between a * peripheral and its PACR field is shown in the table below. The peripheral assignment * to each PACR is defined by the memory map slot that the peripheral is * assigned to. See this chip's memory map for the assignment of a particular * peripheral. The following table shows the location of each peripheral slot's PACR field * in the PACR registers. Offset Register [31:28] [27:24] [23:20] [19:16] [15:12] * [11:8] [7:4] [3:0] 0x20 PACRA PACR0 PACR1 PACR2 PACR3 PACR4 PACR5 PACR6 PACR7 * 0x24 PACRB PACR8 PACR9 PACR10 PACR11 PACR12 PACR13 PACR14 PACR15 0x28 PACRC * PACR16 PACR17 PACR18 PACR19 PACR20 PACR21 PACR22 PACR23 0x2C PACRD PACR24 * PACR25 PACR26 PACR27 PACR28 PACR29 PACR30 PACR31 0x30 Reserved 0x34 Reserved 0x38 * Reserved 0x3C Reserved 0x40 PACRE PACR32 PACR33 PACR34 PACR35 PACR36 PACR37 * PACR38 PACR39 0x44 PACRF PACR40 PACR41 PACR42 PACR43 PACR44 PACR45 PACR46 PACR47 * 0x48 PACRG PACR48 PACR49 PACR50 PACR51 PACR52 PACR53 PACR54 PACR55 0x4C PACRH * PACR56 PACR57 PACR58 PACR59 PACR60 PACR61 PACR62 PACR63 0x50 PACRI PACR64 * PACR65 PACR66 PACR67 PACR68 PACR69 PACR70 PACR71 0x54 PACRJ PACR72 PACR73 PACR74 * PACR75 PACR76 PACR77 PACR78 PACR79 0x58 PACRK PACR80 PACR81 PACR82 PACR83 * PACR84 PACR85 PACR86 PACR87 0x5C PACRL PACR88 PACR89 PACR90 PACR91 PACR92 PACR93 * PACR94 PACR95 0x60 PACRM PACR96 PACR97 PACR98 PACR99 PACR100 PACR101 PACR102 * PACR103 0x64 PACRN PACR104 PACR105 PACR106 PACR107 PACR108 PACR109 PACR110 * PACR111 0x68 PACRO PACR112 PACR113 PACR114 PACR115 PACR116 PACR117 PACR118 PACR119 * 0x6C PACRP PACR120 PACR121 PACR122 PACR123 PACR124 PACR125 PACR126 PACR127 0x80 * PACRU PACR GBL0 PACR GBL1 Reserved The register field descriptions for PACR * A-D, which control peripheral slots 0-31, are shown below. The following * section, PACRPeripheral Access Control Register , shows the register field * descriptions for PACR E-P. All PACR registers are identical. They are divided into two * sections because they occupy two non-contiguous address spaces. */ typedef union _hw_aips_pacrc { uint32_t U; struct _hw_aips_pacrc_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrc_t; #endif /*! * @name Constants and macros for entire AIPS_PACRC register */ //@{ #define HW_AIPS_PACRC_ADDR(x) (REGS_AIPS_BASE(x) + 0x28U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRC(x) (*(__IO hw_aips_pacrc_t *) HW_AIPS_PACRC_ADDR(x)) #define HW_AIPS_PACRC_RD(x) (HW_AIPS_PACRC(x).U) #define HW_AIPS_PACRC_WR(x, v) (HW_AIPS_PACRC(x).U = (v)) #define HW_AIPS_PACRC_SET(x, v) (HW_AIPS_PACRC_WR(x, HW_AIPS_PACRC_RD(x) | (v))) #define HW_AIPS_PACRC_CLR(x, v) (HW_AIPS_PACRC_WR(x, HW_AIPS_PACRC_RD(x) & ~(v))) #define HW_AIPS_PACRC_TOG(x, v) (HW_AIPS_PACRC_WR(x, HW_AIPS_PACRC_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRC bitfields */ /*! * @name Register AIPS_PACRC, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRC_TP7 (0U) //!< Bit position for AIPS_PACRC_TP7. #define BM_AIPS_PACRC_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRC_TP7. #define BS_AIPS_PACRC_TP7 (1U) //!< Bit field size in bits for AIPS_PACRC_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_TP7 field. #define BR_AIPS_PACRC_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRC_TP7. #define BF_AIPS_PACRC_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP7), uint32_t) & BM_AIPS_PACRC_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRC_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRC_WP7 (1U) //!< Bit position for AIPS_PACRC_WP7. #define BM_AIPS_PACRC_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRC_WP7. #define BS_AIPS_PACRC_WP7 (1U) //!< Bit field size in bits for AIPS_PACRC_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_WP7 field. #define BR_AIPS_PACRC_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRC_WP7. #define BF_AIPS_PACRC_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP7), uint32_t) & BM_AIPS_PACRC_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRC_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRC_SP7 (2U) //!< Bit position for AIPS_PACRC_SP7. #define BM_AIPS_PACRC_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRC_SP7. #define BS_AIPS_PACRC_SP7 (1U) //!< Bit field size in bits for AIPS_PACRC_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_SP7 field. #define BR_AIPS_PACRC_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRC_SP7. #define BF_AIPS_PACRC_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP7), uint32_t) & BM_AIPS_PACRC_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRC_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRC_TP6 (4U) //!< Bit position for AIPS_PACRC_TP6. #define BM_AIPS_PACRC_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRC_TP6. #define BS_AIPS_PACRC_TP6 (1U) //!< Bit field size in bits for AIPS_PACRC_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_TP6 field. #define BR_AIPS_PACRC_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRC_TP6. #define BF_AIPS_PACRC_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP6), uint32_t) & BM_AIPS_PACRC_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRC_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRC_WP6 (5U) //!< Bit position for AIPS_PACRC_WP6. #define BM_AIPS_PACRC_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRC_WP6. #define BS_AIPS_PACRC_WP6 (1U) //!< Bit field size in bits for AIPS_PACRC_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_WP6 field. #define BR_AIPS_PACRC_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRC_WP6. #define BF_AIPS_PACRC_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP6), uint32_t) & BM_AIPS_PACRC_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRC_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRC_SP6 (6U) //!< Bit position for AIPS_PACRC_SP6. #define BM_AIPS_PACRC_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRC_SP6. #define BS_AIPS_PACRC_SP6 (1U) //!< Bit field size in bits for AIPS_PACRC_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_SP6 field. #define BR_AIPS_PACRC_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRC_SP6. #define BF_AIPS_PACRC_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP6), uint32_t) & BM_AIPS_PACRC_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRC_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRC_TP5 (8U) //!< Bit position for AIPS_PACRC_TP5. #define BM_AIPS_PACRC_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRC_TP5. #define BS_AIPS_PACRC_TP5 (1U) //!< Bit field size in bits for AIPS_PACRC_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_TP5 field. #define BR_AIPS_PACRC_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRC_TP5. #define BF_AIPS_PACRC_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP5), uint32_t) & BM_AIPS_PACRC_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRC_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRC_WP5 (9U) //!< Bit position for AIPS_PACRC_WP5. #define BM_AIPS_PACRC_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRC_WP5. #define BS_AIPS_PACRC_WP5 (1U) //!< Bit field size in bits for AIPS_PACRC_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_WP5 field. #define BR_AIPS_PACRC_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRC_WP5. #define BF_AIPS_PACRC_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP5), uint32_t) & BM_AIPS_PACRC_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRC_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRC_SP5 (10U) //!< Bit position for AIPS_PACRC_SP5. #define BM_AIPS_PACRC_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRC_SP5. #define BS_AIPS_PACRC_SP5 (1U) //!< Bit field size in bits for AIPS_PACRC_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_SP5 field. #define BR_AIPS_PACRC_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRC_SP5. #define BF_AIPS_PACRC_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP5), uint32_t) & BM_AIPS_PACRC_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRC_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRC_TP4 (12U) //!< Bit position for AIPS_PACRC_TP4. #define BM_AIPS_PACRC_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRC_TP4. #define BS_AIPS_PACRC_TP4 (1U) //!< Bit field size in bits for AIPS_PACRC_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_TP4 field. #define BR_AIPS_PACRC_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRC_TP4. #define BF_AIPS_PACRC_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP4), uint32_t) & BM_AIPS_PACRC_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRC_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field WP4[13] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRC_WP4 (13U) //!< Bit position for AIPS_PACRC_WP4. #define BM_AIPS_PACRC_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRC_WP4. #define BS_AIPS_PACRC_WP4 (1U) //!< Bit field size in bits for AIPS_PACRC_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_WP4 field. #define BR_AIPS_PACRC_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRC_WP4. #define BF_AIPS_PACRC_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP4), uint32_t) & BM_AIPS_PACRC_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRC_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRC_SP4 (14U) //!< Bit position for AIPS_PACRC_SP4. #define BM_AIPS_PACRC_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRC_SP4. #define BS_AIPS_PACRC_SP4 (1U) //!< Bit field size in bits for AIPS_PACRC_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_SP4 field. #define BR_AIPS_PACRC_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRC_SP4. #define BF_AIPS_PACRC_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP4), uint32_t) & BM_AIPS_PACRC_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRC_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRC_TP3 (16U) //!< Bit position for AIPS_PACRC_TP3. #define BM_AIPS_PACRC_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRC_TP3. #define BS_AIPS_PACRC_TP3 (1U) //!< Bit field size in bits for AIPS_PACRC_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_TP3 field. #define BR_AIPS_PACRC_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRC_TP3. #define BF_AIPS_PACRC_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP3), uint32_t) & BM_AIPS_PACRC_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRC_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field WP3[17] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRC_WP3 (17U) //!< Bit position for AIPS_PACRC_WP3. #define BM_AIPS_PACRC_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRC_WP3. #define BS_AIPS_PACRC_WP3 (1U) //!< Bit field size in bits for AIPS_PACRC_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_WP3 field. #define BR_AIPS_PACRC_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRC_WP3. #define BF_AIPS_PACRC_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP3), uint32_t) & BM_AIPS_PACRC_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRC_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRC_SP3 (18U) //!< Bit position for AIPS_PACRC_SP3. #define BM_AIPS_PACRC_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRC_SP3. #define BS_AIPS_PACRC_SP3 (1U) //!< Bit field size in bits for AIPS_PACRC_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_SP3 field. #define BR_AIPS_PACRC_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRC_SP3. #define BF_AIPS_PACRC_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP3), uint32_t) & BM_AIPS_PACRC_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRC_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRC_TP2 (20U) //!< Bit position for AIPS_PACRC_TP2. #define BM_AIPS_PACRC_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRC_TP2. #define BS_AIPS_PACRC_TP2 (1U) //!< Bit field size in bits for AIPS_PACRC_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_TP2 field. #define BR_AIPS_PACRC_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRC_TP2. #define BF_AIPS_PACRC_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP2), uint32_t) & BM_AIPS_PACRC_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRC_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field WP2[21] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRC_WP2 (21U) //!< Bit position for AIPS_PACRC_WP2. #define BM_AIPS_PACRC_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRC_WP2. #define BS_AIPS_PACRC_WP2 (1U) //!< Bit field size in bits for AIPS_PACRC_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_WP2 field. #define BR_AIPS_PACRC_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRC_WP2. #define BF_AIPS_PACRC_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP2), uint32_t) & BM_AIPS_PACRC_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRC_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRC_SP2 (22U) //!< Bit position for AIPS_PACRC_SP2. #define BM_AIPS_PACRC_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRC_SP2. #define BS_AIPS_PACRC_SP2 (1U) //!< Bit field size in bits for AIPS_PACRC_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_SP2 field. #define BR_AIPS_PACRC_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRC_SP2. #define BF_AIPS_PACRC_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP2), uint32_t) & BM_AIPS_PACRC_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRC_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRC_TP1 (24U) //!< Bit position for AIPS_PACRC_TP1. #define BM_AIPS_PACRC_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRC_TP1. #define BS_AIPS_PACRC_TP1 (1U) //!< Bit field size in bits for AIPS_PACRC_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_TP1 field. #define BR_AIPS_PACRC_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRC_TP1. #define BF_AIPS_PACRC_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP1), uint32_t) & BM_AIPS_PACRC_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRC_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRC_WP1 (25U) //!< Bit position for AIPS_PACRC_WP1. #define BM_AIPS_PACRC_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRC_WP1. #define BS_AIPS_PACRC_WP1 (1U) //!< Bit field size in bits for AIPS_PACRC_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_WP1 field. #define BR_AIPS_PACRC_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRC_WP1. #define BF_AIPS_PACRC_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP1), uint32_t) & BM_AIPS_PACRC_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRC_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRC_SP1 (26U) //!< Bit position for AIPS_PACRC_SP1. #define BM_AIPS_PACRC_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRC_SP1. #define BS_AIPS_PACRC_SP1 (1U) //!< Bit field size in bits for AIPS_PACRC_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_SP1 field. #define BR_AIPS_PACRC_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRC_SP1. #define BF_AIPS_PACRC_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP1), uint32_t) & BM_AIPS_PACRC_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRC_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRC_TP0 (28U) //!< Bit position for AIPS_PACRC_TP0. #define BM_AIPS_PACRC_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRC_TP0. #define BS_AIPS_PACRC_TP0 (1U) //!< Bit field size in bits for AIPS_PACRC_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_TP0 field. #define BR_AIPS_PACRC_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRC_TP0. #define BF_AIPS_PACRC_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP0), uint32_t) & BM_AIPS_PACRC_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRC_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field WP0[29] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRC_WP0 (29U) //!< Bit position for AIPS_PACRC_WP0. #define BM_AIPS_PACRC_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRC_WP0. #define BS_AIPS_PACRC_WP0 (1U) //!< Bit field size in bits for AIPS_PACRC_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_WP0 field. #define BR_AIPS_PACRC_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRC_WP0. #define BF_AIPS_PACRC_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP0), uint32_t) & BM_AIPS_PACRC_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRC_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRC, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRC_SP0 (30U) //!< Bit position for AIPS_PACRC_SP0. #define BM_AIPS_PACRC_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRC_SP0. #define BS_AIPS_PACRC_SP0 (1U) //!< Bit field size in bits for AIPS_PACRC_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRC_SP0 field. #define BR_AIPS_PACRC_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRC_SP0. #define BF_AIPS_PACRC_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP0), uint32_t) & BM_AIPS_PACRC_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRC_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRD - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRD - Peripheral Access Control Register (RW) * * Reset value: 0x00000004U * * Each PACR register consists of eight 4-bit PACR fields. Each PACR field * defines the access levels for a particular peripheral. The mapping between a * peripheral and its PACR field is shown in the table below. The peripheral assignment * to each PACR is defined by the memory map slot that the peripheral is * assigned to. See this chip's memory map for the assignment of a particular * peripheral. The following table shows the location of each peripheral slot's PACR field * in the PACR registers. Offset Register [31:28] [27:24] [23:20] [19:16] [15:12] * [11:8] [7:4] [3:0] 0x20 PACRA PACR0 PACR1 PACR2 PACR3 PACR4 PACR5 PACR6 PACR7 * 0x24 PACRB PACR8 PACR9 PACR10 PACR11 PACR12 PACR13 PACR14 PACR15 0x28 PACRC * PACR16 PACR17 PACR18 PACR19 PACR20 PACR21 PACR22 PACR23 0x2C PACRD PACR24 * PACR25 PACR26 PACR27 PACR28 PACR29 PACR30 PACR31 0x30 Reserved 0x34 Reserved 0x38 * Reserved 0x3C Reserved 0x40 PACRE PACR32 PACR33 PACR34 PACR35 PACR36 PACR37 * PACR38 PACR39 0x44 PACRF PACR40 PACR41 PACR42 PACR43 PACR44 PACR45 PACR46 PACR47 * 0x48 PACRG PACR48 PACR49 PACR50 PACR51 PACR52 PACR53 PACR54 PACR55 0x4C PACRH * PACR56 PACR57 PACR58 PACR59 PACR60 PACR61 PACR62 PACR63 0x50 PACRI PACR64 * PACR65 PACR66 PACR67 PACR68 PACR69 PACR70 PACR71 0x54 PACRJ PACR72 PACR73 PACR74 * PACR75 PACR76 PACR77 PACR78 PACR79 0x58 PACRK PACR80 PACR81 PACR82 PACR83 * PACR84 PACR85 PACR86 PACR87 0x5C PACRL PACR88 PACR89 PACR90 PACR91 PACR92 PACR93 * PACR94 PACR95 0x60 PACRM PACR96 PACR97 PACR98 PACR99 PACR100 PACR101 PACR102 * PACR103 0x64 PACRN PACR104 PACR105 PACR106 PACR107 PACR108 PACR109 PACR110 * PACR111 0x68 PACRO PACR112 PACR113 PACR114 PACR115 PACR116 PACR117 PACR118 PACR119 * 0x6C PACRP PACR120 PACR121 PACR122 PACR123 PACR124 PACR125 PACR126 PACR127 0x80 * PACRU PACR GBL0 PACR GBL1 Reserved The register field descriptions for PACR * A-D, which control peripheral slots 0-31, are shown below. The following * section, PACRPeripheral Access Control Register , shows the register field * descriptions for PACR E-P. All PACR registers are identical. They are divided into two * sections because they occupy two non-contiguous address spaces. */ typedef union _hw_aips_pacrd { uint32_t U; struct _hw_aips_pacrd_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrd_t; #endif /*! * @name Constants and macros for entire AIPS_PACRD register */ //@{ #define HW_AIPS_PACRD_ADDR(x) (REGS_AIPS_BASE(x) + 0x2CU) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRD(x) (*(__IO hw_aips_pacrd_t *) HW_AIPS_PACRD_ADDR(x)) #define HW_AIPS_PACRD_RD(x) (HW_AIPS_PACRD(x).U) #define HW_AIPS_PACRD_WR(x, v) (HW_AIPS_PACRD(x).U = (v)) #define HW_AIPS_PACRD_SET(x, v) (HW_AIPS_PACRD_WR(x, HW_AIPS_PACRD_RD(x) | (v))) #define HW_AIPS_PACRD_CLR(x, v) (HW_AIPS_PACRD_WR(x, HW_AIPS_PACRD_RD(x) & ~(v))) #define HW_AIPS_PACRD_TOG(x, v) (HW_AIPS_PACRD_WR(x, HW_AIPS_PACRD_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRD bitfields */ /*! * @name Register AIPS_PACRD, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRD_TP7 (0U) //!< Bit position for AIPS_PACRD_TP7. #define BM_AIPS_PACRD_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRD_TP7. #define BS_AIPS_PACRD_TP7 (1U) //!< Bit field size in bits for AIPS_PACRD_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_TP7 field. #define BR_AIPS_PACRD_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRD_TP7. #define BF_AIPS_PACRD_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP7), uint32_t) & BM_AIPS_PACRD_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRD_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRD_WP7 (1U) //!< Bit position for AIPS_PACRD_WP7. #define BM_AIPS_PACRD_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRD_WP7. #define BS_AIPS_PACRD_WP7 (1U) //!< Bit field size in bits for AIPS_PACRD_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_WP7 field. #define BR_AIPS_PACRD_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRD_WP7. #define BF_AIPS_PACRD_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP7), uint32_t) & BM_AIPS_PACRD_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRD_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRD_SP7 (2U) //!< Bit position for AIPS_PACRD_SP7. #define BM_AIPS_PACRD_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRD_SP7. #define BS_AIPS_PACRD_SP7 (1U) //!< Bit field size in bits for AIPS_PACRD_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_SP7 field. #define BR_AIPS_PACRD_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRD_SP7. #define BF_AIPS_PACRD_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP7), uint32_t) & BM_AIPS_PACRD_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRD_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRD_TP6 (4U) //!< Bit position for AIPS_PACRD_TP6. #define BM_AIPS_PACRD_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRD_TP6. #define BS_AIPS_PACRD_TP6 (1U) //!< Bit field size in bits for AIPS_PACRD_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_TP6 field. #define BR_AIPS_PACRD_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRD_TP6. #define BF_AIPS_PACRD_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP6), uint32_t) & BM_AIPS_PACRD_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRD_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRD_WP6 (5U) //!< Bit position for AIPS_PACRD_WP6. #define BM_AIPS_PACRD_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRD_WP6. #define BS_AIPS_PACRD_WP6 (1U) //!< Bit field size in bits for AIPS_PACRD_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_WP6 field. #define BR_AIPS_PACRD_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRD_WP6. #define BF_AIPS_PACRD_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP6), uint32_t) & BM_AIPS_PACRD_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRD_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRD_SP6 (6U) //!< Bit position for AIPS_PACRD_SP6. #define BM_AIPS_PACRD_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRD_SP6. #define BS_AIPS_PACRD_SP6 (1U) //!< Bit field size in bits for AIPS_PACRD_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_SP6 field. #define BR_AIPS_PACRD_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRD_SP6. #define BF_AIPS_PACRD_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP6), uint32_t) & BM_AIPS_PACRD_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRD_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRD_TP5 (8U) //!< Bit position for AIPS_PACRD_TP5. #define BM_AIPS_PACRD_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRD_TP5. #define BS_AIPS_PACRD_TP5 (1U) //!< Bit field size in bits for AIPS_PACRD_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_TP5 field. #define BR_AIPS_PACRD_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRD_TP5. #define BF_AIPS_PACRD_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP5), uint32_t) & BM_AIPS_PACRD_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRD_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRD_WP5 (9U) //!< Bit position for AIPS_PACRD_WP5. #define BM_AIPS_PACRD_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRD_WP5. #define BS_AIPS_PACRD_WP5 (1U) //!< Bit field size in bits for AIPS_PACRD_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_WP5 field. #define BR_AIPS_PACRD_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRD_WP5. #define BF_AIPS_PACRD_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP5), uint32_t) & BM_AIPS_PACRD_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRD_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRD_SP5 (10U) //!< Bit position for AIPS_PACRD_SP5. #define BM_AIPS_PACRD_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRD_SP5. #define BS_AIPS_PACRD_SP5 (1U) //!< Bit field size in bits for AIPS_PACRD_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_SP5 field. #define BR_AIPS_PACRD_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRD_SP5. #define BF_AIPS_PACRD_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP5), uint32_t) & BM_AIPS_PACRD_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRD_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRD_TP4 (12U) //!< Bit position for AIPS_PACRD_TP4. #define BM_AIPS_PACRD_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRD_TP4. #define BS_AIPS_PACRD_TP4 (1U) //!< Bit field size in bits for AIPS_PACRD_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_TP4 field. #define BR_AIPS_PACRD_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRD_TP4. #define BF_AIPS_PACRD_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP4), uint32_t) & BM_AIPS_PACRD_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRD_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field WP4[13] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRD_WP4 (13U) //!< Bit position for AIPS_PACRD_WP4. #define BM_AIPS_PACRD_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRD_WP4. #define BS_AIPS_PACRD_WP4 (1U) //!< Bit field size in bits for AIPS_PACRD_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_WP4 field. #define BR_AIPS_PACRD_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRD_WP4. #define BF_AIPS_PACRD_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP4), uint32_t) & BM_AIPS_PACRD_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRD_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRD_SP4 (14U) //!< Bit position for AIPS_PACRD_SP4. #define BM_AIPS_PACRD_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRD_SP4. #define BS_AIPS_PACRD_SP4 (1U) //!< Bit field size in bits for AIPS_PACRD_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_SP4 field. #define BR_AIPS_PACRD_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRD_SP4. #define BF_AIPS_PACRD_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP4), uint32_t) & BM_AIPS_PACRD_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRD_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRD_TP3 (16U) //!< Bit position for AIPS_PACRD_TP3. #define BM_AIPS_PACRD_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRD_TP3. #define BS_AIPS_PACRD_TP3 (1U) //!< Bit field size in bits for AIPS_PACRD_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_TP3 field. #define BR_AIPS_PACRD_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRD_TP3. #define BF_AIPS_PACRD_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP3), uint32_t) & BM_AIPS_PACRD_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRD_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field WP3[17] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRD_WP3 (17U) //!< Bit position for AIPS_PACRD_WP3. #define BM_AIPS_PACRD_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRD_WP3. #define BS_AIPS_PACRD_WP3 (1U) //!< Bit field size in bits for AIPS_PACRD_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_WP3 field. #define BR_AIPS_PACRD_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRD_WP3. #define BF_AIPS_PACRD_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP3), uint32_t) & BM_AIPS_PACRD_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRD_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRD_SP3 (18U) //!< Bit position for AIPS_PACRD_SP3. #define BM_AIPS_PACRD_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRD_SP3. #define BS_AIPS_PACRD_SP3 (1U) //!< Bit field size in bits for AIPS_PACRD_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_SP3 field. #define BR_AIPS_PACRD_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRD_SP3. #define BF_AIPS_PACRD_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP3), uint32_t) & BM_AIPS_PACRD_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRD_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRD_TP2 (20U) //!< Bit position for AIPS_PACRD_TP2. #define BM_AIPS_PACRD_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRD_TP2. #define BS_AIPS_PACRD_TP2 (1U) //!< Bit field size in bits for AIPS_PACRD_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_TP2 field. #define BR_AIPS_PACRD_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRD_TP2. #define BF_AIPS_PACRD_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP2), uint32_t) & BM_AIPS_PACRD_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRD_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field WP2[21] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRD_WP2 (21U) //!< Bit position for AIPS_PACRD_WP2. #define BM_AIPS_PACRD_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRD_WP2. #define BS_AIPS_PACRD_WP2 (1U) //!< Bit field size in bits for AIPS_PACRD_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_WP2 field. #define BR_AIPS_PACRD_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRD_WP2. #define BF_AIPS_PACRD_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP2), uint32_t) & BM_AIPS_PACRD_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRD_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRD_SP2 (22U) //!< Bit position for AIPS_PACRD_SP2. #define BM_AIPS_PACRD_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRD_SP2. #define BS_AIPS_PACRD_SP2 (1U) //!< Bit field size in bits for AIPS_PACRD_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_SP2 field. #define BR_AIPS_PACRD_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRD_SP2. #define BF_AIPS_PACRD_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP2), uint32_t) & BM_AIPS_PACRD_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRD_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRD_TP1 (24U) //!< Bit position for AIPS_PACRD_TP1. #define BM_AIPS_PACRD_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRD_TP1. #define BS_AIPS_PACRD_TP1 (1U) //!< Bit field size in bits for AIPS_PACRD_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_TP1 field. #define BR_AIPS_PACRD_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRD_TP1. #define BF_AIPS_PACRD_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP1), uint32_t) & BM_AIPS_PACRD_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRD_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRD_WP1 (25U) //!< Bit position for AIPS_PACRD_WP1. #define BM_AIPS_PACRD_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRD_WP1. #define BS_AIPS_PACRD_WP1 (1U) //!< Bit field size in bits for AIPS_PACRD_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_WP1 field. #define BR_AIPS_PACRD_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRD_WP1. #define BF_AIPS_PACRD_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP1), uint32_t) & BM_AIPS_PACRD_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRD_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRD_SP1 (26U) //!< Bit position for AIPS_PACRD_SP1. #define BM_AIPS_PACRD_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRD_SP1. #define BS_AIPS_PACRD_SP1 (1U) //!< Bit field size in bits for AIPS_PACRD_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_SP1 field. #define BR_AIPS_PACRD_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRD_SP1. #define BF_AIPS_PACRD_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP1), uint32_t) & BM_AIPS_PACRD_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRD_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRD_TP0 (28U) //!< Bit position for AIPS_PACRD_TP0. #define BM_AIPS_PACRD_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRD_TP0. #define BS_AIPS_PACRD_TP0 (1U) //!< Bit field size in bits for AIPS_PACRD_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_TP0 field. #define BR_AIPS_PACRD_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRD_TP0. #define BF_AIPS_PACRD_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP0), uint32_t) & BM_AIPS_PACRD_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRD_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field WP0[29] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRD_WP0 (29U) //!< Bit position for AIPS_PACRD_WP0. #define BM_AIPS_PACRD_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRD_WP0. #define BS_AIPS_PACRD_WP0 (1U) //!< Bit field size in bits for AIPS_PACRD_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_WP0 field. #define BR_AIPS_PACRD_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRD_WP0. #define BF_AIPS_PACRD_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP0), uint32_t) & BM_AIPS_PACRD_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRD_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRD, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRD_SP0 (30U) //!< Bit position for AIPS_PACRD_SP0. #define BM_AIPS_PACRD_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRD_SP0. #define BS_AIPS_PACRD_SP0 (1U) //!< Bit field size in bits for AIPS_PACRD_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRD_SP0 field. #define BR_AIPS_PACRD_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRD_SP0. #define BF_AIPS_PACRD_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP0), uint32_t) & BM_AIPS_PACRD_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRD_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRE - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRE - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacre { uint32_t U; struct _hw_aips_pacre_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacre_t; #endif /*! * @name Constants and macros for entire AIPS_PACRE register */ //@{ #define HW_AIPS_PACRE_ADDR(x) (REGS_AIPS_BASE(x) + 0x40U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRE(x) (*(__IO hw_aips_pacre_t *) HW_AIPS_PACRE_ADDR(x)) #define HW_AIPS_PACRE_RD(x) (HW_AIPS_PACRE(x).U) #define HW_AIPS_PACRE_WR(x, v) (HW_AIPS_PACRE(x).U = (v)) #define HW_AIPS_PACRE_SET(x, v) (HW_AIPS_PACRE_WR(x, HW_AIPS_PACRE_RD(x) | (v))) #define HW_AIPS_PACRE_CLR(x, v) (HW_AIPS_PACRE_WR(x, HW_AIPS_PACRE_RD(x) & ~(v))) #define HW_AIPS_PACRE_TOG(x, v) (HW_AIPS_PACRE_WR(x, HW_AIPS_PACRE_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRE bitfields */ /*! * @name Register AIPS_PACRE, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRE_TP7 (0U) //!< Bit position for AIPS_PACRE_TP7. #define BM_AIPS_PACRE_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRE_TP7. #define BS_AIPS_PACRE_TP7 (1U) //!< Bit field size in bits for AIPS_PACRE_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_TP7 field. #define BR_AIPS_PACRE_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRE_TP7. #define BF_AIPS_PACRE_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP7), uint32_t) & BM_AIPS_PACRE_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRE_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRE_WP7 (1U) //!< Bit position for AIPS_PACRE_WP7. #define BM_AIPS_PACRE_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRE_WP7. #define BS_AIPS_PACRE_WP7 (1U) //!< Bit field size in bits for AIPS_PACRE_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_WP7 field. #define BR_AIPS_PACRE_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRE_WP7. #define BF_AIPS_PACRE_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP7), uint32_t) & BM_AIPS_PACRE_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRE_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRE_SP7 (2U) //!< Bit position for AIPS_PACRE_SP7. #define BM_AIPS_PACRE_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRE_SP7. #define BS_AIPS_PACRE_SP7 (1U) //!< Bit field size in bits for AIPS_PACRE_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_SP7 field. #define BR_AIPS_PACRE_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRE_SP7. #define BF_AIPS_PACRE_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP7), uint32_t) & BM_AIPS_PACRE_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRE_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRE_TP6 (4U) //!< Bit position for AIPS_PACRE_TP6. #define BM_AIPS_PACRE_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRE_TP6. #define BS_AIPS_PACRE_TP6 (1U) //!< Bit field size in bits for AIPS_PACRE_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_TP6 field. #define BR_AIPS_PACRE_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRE_TP6. #define BF_AIPS_PACRE_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP6), uint32_t) & BM_AIPS_PACRE_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRE_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRE_WP6 (5U) //!< Bit position for AIPS_PACRE_WP6. #define BM_AIPS_PACRE_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRE_WP6. #define BS_AIPS_PACRE_WP6 (1U) //!< Bit field size in bits for AIPS_PACRE_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_WP6 field. #define BR_AIPS_PACRE_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRE_WP6. #define BF_AIPS_PACRE_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP6), uint32_t) & BM_AIPS_PACRE_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRE_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRE_SP6 (6U) //!< Bit position for AIPS_PACRE_SP6. #define BM_AIPS_PACRE_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRE_SP6. #define BS_AIPS_PACRE_SP6 (1U) //!< Bit field size in bits for AIPS_PACRE_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_SP6 field. #define BR_AIPS_PACRE_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRE_SP6. #define BF_AIPS_PACRE_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP6), uint32_t) & BM_AIPS_PACRE_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRE_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRE_TP5 (8U) //!< Bit position for AIPS_PACRE_TP5. #define BM_AIPS_PACRE_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRE_TP5. #define BS_AIPS_PACRE_TP5 (1U) //!< Bit field size in bits for AIPS_PACRE_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_TP5 field. #define BR_AIPS_PACRE_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRE_TP5. #define BF_AIPS_PACRE_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP5), uint32_t) & BM_AIPS_PACRE_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRE_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRE_WP5 (9U) //!< Bit position for AIPS_PACRE_WP5. #define BM_AIPS_PACRE_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRE_WP5. #define BS_AIPS_PACRE_WP5 (1U) //!< Bit field size in bits for AIPS_PACRE_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_WP5 field. #define BR_AIPS_PACRE_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRE_WP5. #define BF_AIPS_PACRE_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP5), uint32_t) & BM_AIPS_PACRE_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRE_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRE_SP5 (10U) //!< Bit position for AIPS_PACRE_SP5. #define BM_AIPS_PACRE_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRE_SP5. #define BS_AIPS_PACRE_SP5 (1U) //!< Bit field size in bits for AIPS_PACRE_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_SP5 field. #define BR_AIPS_PACRE_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRE_SP5. #define BF_AIPS_PACRE_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP5), uint32_t) & BM_AIPS_PACRE_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRE_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRE_TP4 (12U) //!< Bit position for AIPS_PACRE_TP4. #define BM_AIPS_PACRE_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRE_TP4. #define BS_AIPS_PACRE_TP4 (1U) //!< Bit field size in bits for AIPS_PACRE_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_TP4 field. #define BR_AIPS_PACRE_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRE_TP4. #define BF_AIPS_PACRE_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP4), uint32_t) & BM_AIPS_PACRE_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRE_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRE_WP4 (13U) //!< Bit position for AIPS_PACRE_WP4. #define BM_AIPS_PACRE_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRE_WP4. #define BS_AIPS_PACRE_WP4 (1U) //!< Bit field size in bits for AIPS_PACRE_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_WP4 field. #define BR_AIPS_PACRE_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRE_WP4. #define BF_AIPS_PACRE_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP4), uint32_t) & BM_AIPS_PACRE_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRE_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRE_SP4 (14U) //!< Bit position for AIPS_PACRE_SP4. #define BM_AIPS_PACRE_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRE_SP4. #define BS_AIPS_PACRE_SP4 (1U) //!< Bit field size in bits for AIPS_PACRE_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_SP4 field. #define BR_AIPS_PACRE_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRE_SP4. #define BF_AIPS_PACRE_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP4), uint32_t) & BM_AIPS_PACRE_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRE_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRE_TP3 (16U) //!< Bit position for AIPS_PACRE_TP3. #define BM_AIPS_PACRE_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRE_TP3. #define BS_AIPS_PACRE_TP3 (1U) //!< Bit field size in bits for AIPS_PACRE_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_TP3 field. #define BR_AIPS_PACRE_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRE_TP3. #define BF_AIPS_PACRE_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP3), uint32_t) & BM_AIPS_PACRE_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRE_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRE_WP3 (17U) //!< Bit position for AIPS_PACRE_WP3. #define BM_AIPS_PACRE_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRE_WP3. #define BS_AIPS_PACRE_WP3 (1U) //!< Bit field size in bits for AIPS_PACRE_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_WP3 field. #define BR_AIPS_PACRE_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRE_WP3. #define BF_AIPS_PACRE_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP3), uint32_t) & BM_AIPS_PACRE_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRE_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRE_SP3 (18U) //!< Bit position for AIPS_PACRE_SP3. #define BM_AIPS_PACRE_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRE_SP3. #define BS_AIPS_PACRE_SP3 (1U) //!< Bit field size in bits for AIPS_PACRE_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_SP3 field. #define BR_AIPS_PACRE_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRE_SP3. #define BF_AIPS_PACRE_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP3), uint32_t) & BM_AIPS_PACRE_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRE_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRE_TP2 (20U) //!< Bit position for AIPS_PACRE_TP2. #define BM_AIPS_PACRE_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRE_TP2. #define BS_AIPS_PACRE_TP2 (1U) //!< Bit field size in bits for AIPS_PACRE_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_TP2 field. #define BR_AIPS_PACRE_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRE_TP2. #define BF_AIPS_PACRE_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP2), uint32_t) & BM_AIPS_PACRE_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRE_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRE_WP2 (21U) //!< Bit position for AIPS_PACRE_WP2. #define BM_AIPS_PACRE_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRE_WP2. #define BS_AIPS_PACRE_WP2 (1U) //!< Bit field size in bits for AIPS_PACRE_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_WP2 field. #define BR_AIPS_PACRE_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRE_WP2. #define BF_AIPS_PACRE_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP2), uint32_t) & BM_AIPS_PACRE_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRE_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRE_SP2 (22U) //!< Bit position for AIPS_PACRE_SP2. #define BM_AIPS_PACRE_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRE_SP2. #define BS_AIPS_PACRE_SP2 (1U) //!< Bit field size in bits for AIPS_PACRE_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_SP2 field. #define BR_AIPS_PACRE_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRE_SP2. #define BF_AIPS_PACRE_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP2), uint32_t) & BM_AIPS_PACRE_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRE_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRE_TP1 (24U) //!< Bit position for AIPS_PACRE_TP1. #define BM_AIPS_PACRE_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRE_TP1. #define BS_AIPS_PACRE_TP1 (1U) //!< Bit field size in bits for AIPS_PACRE_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_TP1 field. #define BR_AIPS_PACRE_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRE_TP1. #define BF_AIPS_PACRE_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP1), uint32_t) & BM_AIPS_PACRE_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRE_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRE_WP1 (25U) //!< Bit position for AIPS_PACRE_WP1. #define BM_AIPS_PACRE_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRE_WP1. #define BS_AIPS_PACRE_WP1 (1U) //!< Bit field size in bits for AIPS_PACRE_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_WP1 field. #define BR_AIPS_PACRE_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRE_WP1. #define BF_AIPS_PACRE_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP1), uint32_t) & BM_AIPS_PACRE_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRE_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRE_SP1 (26U) //!< Bit position for AIPS_PACRE_SP1. #define BM_AIPS_PACRE_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRE_SP1. #define BS_AIPS_PACRE_SP1 (1U) //!< Bit field size in bits for AIPS_PACRE_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_SP1 field. #define BR_AIPS_PACRE_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRE_SP1. #define BF_AIPS_PACRE_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP1), uint32_t) & BM_AIPS_PACRE_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRE_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRE_TP0 (28U) //!< Bit position for AIPS_PACRE_TP0. #define BM_AIPS_PACRE_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRE_TP0. #define BS_AIPS_PACRE_TP0 (1U) //!< Bit field size in bits for AIPS_PACRE_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_TP0 field. #define BR_AIPS_PACRE_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRE_TP0. #define BF_AIPS_PACRE_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP0), uint32_t) & BM_AIPS_PACRE_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRE_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRE_WP0 (29U) //!< Bit position for AIPS_PACRE_WP0. #define BM_AIPS_PACRE_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRE_WP0. #define BS_AIPS_PACRE_WP0 (1U) //!< Bit field size in bits for AIPS_PACRE_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_WP0 field. #define BR_AIPS_PACRE_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRE_WP0. #define BF_AIPS_PACRE_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP0), uint32_t) & BM_AIPS_PACRE_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRE_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRE, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRE_SP0 (30U) //!< Bit position for AIPS_PACRE_SP0. #define BM_AIPS_PACRE_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRE_SP0. #define BS_AIPS_PACRE_SP0 (1U) //!< Bit field size in bits for AIPS_PACRE_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRE_SP0 field. #define BR_AIPS_PACRE_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRE_SP0. #define BF_AIPS_PACRE_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP0), uint32_t) & BM_AIPS_PACRE_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRE_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRF - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRF - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacrf { uint32_t U; struct _hw_aips_pacrf_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrf_t; #endif /*! * @name Constants and macros for entire AIPS_PACRF register */ //@{ #define HW_AIPS_PACRF_ADDR(x) (REGS_AIPS_BASE(x) + 0x44U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRF(x) (*(__IO hw_aips_pacrf_t *) HW_AIPS_PACRF_ADDR(x)) #define HW_AIPS_PACRF_RD(x) (HW_AIPS_PACRF(x).U) #define HW_AIPS_PACRF_WR(x, v) (HW_AIPS_PACRF(x).U = (v)) #define HW_AIPS_PACRF_SET(x, v) (HW_AIPS_PACRF_WR(x, HW_AIPS_PACRF_RD(x) | (v))) #define HW_AIPS_PACRF_CLR(x, v) (HW_AIPS_PACRF_WR(x, HW_AIPS_PACRF_RD(x) & ~(v))) #define HW_AIPS_PACRF_TOG(x, v) (HW_AIPS_PACRF_WR(x, HW_AIPS_PACRF_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRF bitfields */ /*! * @name Register AIPS_PACRF, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRF_TP7 (0U) //!< Bit position for AIPS_PACRF_TP7. #define BM_AIPS_PACRF_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRF_TP7. #define BS_AIPS_PACRF_TP7 (1U) //!< Bit field size in bits for AIPS_PACRF_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_TP7 field. #define BR_AIPS_PACRF_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRF_TP7. #define BF_AIPS_PACRF_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP7), uint32_t) & BM_AIPS_PACRF_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRF_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRF_WP7 (1U) //!< Bit position for AIPS_PACRF_WP7. #define BM_AIPS_PACRF_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRF_WP7. #define BS_AIPS_PACRF_WP7 (1U) //!< Bit field size in bits for AIPS_PACRF_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_WP7 field. #define BR_AIPS_PACRF_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRF_WP7. #define BF_AIPS_PACRF_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP7), uint32_t) & BM_AIPS_PACRF_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRF_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRF_SP7 (2U) //!< Bit position for AIPS_PACRF_SP7. #define BM_AIPS_PACRF_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRF_SP7. #define BS_AIPS_PACRF_SP7 (1U) //!< Bit field size in bits for AIPS_PACRF_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_SP7 field. #define BR_AIPS_PACRF_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRF_SP7. #define BF_AIPS_PACRF_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP7), uint32_t) & BM_AIPS_PACRF_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRF_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRF_TP6 (4U) //!< Bit position for AIPS_PACRF_TP6. #define BM_AIPS_PACRF_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRF_TP6. #define BS_AIPS_PACRF_TP6 (1U) //!< Bit field size in bits for AIPS_PACRF_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_TP6 field. #define BR_AIPS_PACRF_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRF_TP6. #define BF_AIPS_PACRF_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP6), uint32_t) & BM_AIPS_PACRF_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRF_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRF_WP6 (5U) //!< Bit position for AIPS_PACRF_WP6. #define BM_AIPS_PACRF_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRF_WP6. #define BS_AIPS_PACRF_WP6 (1U) //!< Bit field size in bits for AIPS_PACRF_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_WP6 field. #define BR_AIPS_PACRF_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRF_WP6. #define BF_AIPS_PACRF_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP6), uint32_t) & BM_AIPS_PACRF_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRF_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRF_SP6 (6U) //!< Bit position for AIPS_PACRF_SP6. #define BM_AIPS_PACRF_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRF_SP6. #define BS_AIPS_PACRF_SP6 (1U) //!< Bit field size in bits for AIPS_PACRF_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_SP6 field. #define BR_AIPS_PACRF_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRF_SP6. #define BF_AIPS_PACRF_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP6), uint32_t) & BM_AIPS_PACRF_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRF_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRF_TP5 (8U) //!< Bit position for AIPS_PACRF_TP5. #define BM_AIPS_PACRF_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRF_TP5. #define BS_AIPS_PACRF_TP5 (1U) //!< Bit field size in bits for AIPS_PACRF_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_TP5 field. #define BR_AIPS_PACRF_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRF_TP5. #define BF_AIPS_PACRF_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP5), uint32_t) & BM_AIPS_PACRF_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRF_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRF_WP5 (9U) //!< Bit position for AIPS_PACRF_WP5. #define BM_AIPS_PACRF_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRF_WP5. #define BS_AIPS_PACRF_WP5 (1U) //!< Bit field size in bits for AIPS_PACRF_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_WP5 field. #define BR_AIPS_PACRF_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRF_WP5. #define BF_AIPS_PACRF_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP5), uint32_t) & BM_AIPS_PACRF_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRF_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRF_SP5 (10U) //!< Bit position for AIPS_PACRF_SP5. #define BM_AIPS_PACRF_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRF_SP5. #define BS_AIPS_PACRF_SP5 (1U) //!< Bit field size in bits for AIPS_PACRF_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_SP5 field. #define BR_AIPS_PACRF_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRF_SP5. #define BF_AIPS_PACRF_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP5), uint32_t) & BM_AIPS_PACRF_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRF_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRF_TP4 (12U) //!< Bit position for AIPS_PACRF_TP4. #define BM_AIPS_PACRF_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRF_TP4. #define BS_AIPS_PACRF_TP4 (1U) //!< Bit field size in bits for AIPS_PACRF_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_TP4 field. #define BR_AIPS_PACRF_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRF_TP4. #define BF_AIPS_PACRF_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP4), uint32_t) & BM_AIPS_PACRF_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRF_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRF_WP4 (13U) //!< Bit position for AIPS_PACRF_WP4. #define BM_AIPS_PACRF_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRF_WP4. #define BS_AIPS_PACRF_WP4 (1U) //!< Bit field size in bits for AIPS_PACRF_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_WP4 field. #define BR_AIPS_PACRF_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRF_WP4. #define BF_AIPS_PACRF_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP4), uint32_t) & BM_AIPS_PACRF_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRF_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRF_SP4 (14U) //!< Bit position for AIPS_PACRF_SP4. #define BM_AIPS_PACRF_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRF_SP4. #define BS_AIPS_PACRF_SP4 (1U) //!< Bit field size in bits for AIPS_PACRF_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_SP4 field. #define BR_AIPS_PACRF_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRF_SP4. #define BF_AIPS_PACRF_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP4), uint32_t) & BM_AIPS_PACRF_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRF_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRF_TP3 (16U) //!< Bit position for AIPS_PACRF_TP3. #define BM_AIPS_PACRF_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRF_TP3. #define BS_AIPS_PACRF_TP3 (1U) //!< Bit field size in bits for AIPS_PACRF_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_TP3 field. #define BR_AIPS_PACRF_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRF_TP3. #define BF_AIPS_PACRF_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP3), uint32_t) & BM_AIPS_PACRF_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRF_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRF_WP3 (17U) //!< Bit position for AIPS_PACRF_WP3. #define BM_AIPS_PACRF_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRF_WP3. #define BS_AIPS_PACRF_WP3 (1U) //!< Bit field size in bits for AIPS_PACRF_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_WP3 field. #define BR_AIPS_PACRF_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRF_WP3. #define BF_AIPS_PACRF_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP3), uint32_t) & BM_AIPS_PACRF_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRF_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRF_SP3 (18U) //!< Bit position for AIPS_PACRF_SP3. #define BM_AIPS_PACRF_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRF_SP3. #define BS_AIPS_PACRF_SP3 (1U) //!< Bit field size in bits for AIPS_PACRF_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_SP3 field. #define BR_AIPS_PACRF_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRF_SP3. #define BF_AIPS_PACRF_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP3), uint32_t) & BM_AIPS_PACRF_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRF_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRF_TP2 (20U) //!< Bit position for AIPS_PACRF_TP2. #define BM_AIPS_PACRF_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRF_TP2. #define BS_AIPS_PACRF_TP2 (1U) //!< Bit field size in bits for AIPS_PACRF_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_TP2 field. #define BR_AIPS_PACRF_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRF_TP2. #define BF_AIPS_PACRF_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP2), uint32_t) & BM_AIPS_PACRF_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRF_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRF_WP2 (21U) //!< Bit position for AIPS_PACRF_WP2. #define BM_AIPS_PACRF_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRF_WP2. #define BS_AIPS_PACRF_WP2 (1U) //!< Bit field size in bits for AIPS_PACRF_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_WP2 field. #define BR_AIPS_PACRF_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRF_WP2. #define BF_AIPS_PACRF_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP2), uint32_t) & BM_AIPS_PACRF_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRF_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRF_SP2 (22U) //!< Bit position for AIPS_PACRF_SP2. #define BM_AIPS_PACRF_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRF_SP2. #define BS_AIPS_PACRF_SP2 (1U) //!< Bit field size in bits for AIPS_PACRF_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_SP2 field. #define BR_AIPS_PACRF_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRF_SP2. #define BF_AIPS_PACRF_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP2), uint32_t) & BM_AIPS_PACRF_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRF_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRF_TP1 (24U) //!< Bit position for AIPS_PACRF_TP1. #define BM_AIPS_PACRF_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRF_TP1. #define BS_AIPS_PACRF_TP1 (1U) //!< Bit field size in bits for AIPS_PACRF_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_TP1 field. #define BR_AIPS_PACRF_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRF_TP1. #define BF_AIPS_PACRF_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP1), uint32_t) & BM_AIPS_PACRF_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRF_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRF_WP1 (25U) //!< Bit position for AIPS_PACRF_WP1. #define BM_AIPS_PACRF_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRF_WP1. #define BS_AIPS_PACRF_WP1 (1U) //!< Bit field size in bits for AIPS_PACRF_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_WP1 field. #define BR_AIPS_PACRF_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRF_WP1. #define BF_AIPS_PACRF_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP1), uint32_t) & BM_AIPS_PACRF_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRF_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRF_SP1 (26U) //!< Bit position for AIPS_PACRF_SP1. #define BM_AIPS_PACRF_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRF_SP1. #define BS_AIPS_PACRF_SP1 (1U) //!< Bit field size in bits for AIPS_PACRF_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_SP1 field. #define BR_AIPS_PACRF_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRF_SP1. #define BF_AIPS_PACRF_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP1), uint32_t) & BM_AIPS_PACRF_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRF_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRF_TP0 (28U) //!< Bit position for AIPS_PACRF_TP0. #define BM_AIPS_PACRF_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRF_TP0. #define BS_AIPS_PACRF_TP0 (1U) //!< Bit field size in bits for AIPS_PACRF_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_TP0 field. #define BR_AIPS_PACRF_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRF_TP0. #define BF_AIPS_PACRF_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP0), uint32_t) & BM_AIPS_PACRF_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRF_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRF_WP0 (29U) //!< Bit position for AIPS_PACRF_WP0. #define BM_AIPS_PACRF_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRF_WP0. #define BS_AIPS_PACRF_WP0 (1U) //!< Bit field size in bits for AIPS_PACRF_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_WP0 field. #define BR_AIPS_PACRF_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRF_WP0. #define BF_AIPS_PACRF_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP0), uint32_t) & BM_AIPS_PACRF_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRF_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRF, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRF_SP0 (30U) //!< Bit position for AIPS_PACRF_SP0. #define BM_AIPS_PACRF_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRF_SP0. #define BS_AIPS_PACRF_SP0 (1U) //!< Bit field size in bits for AIPS_PACRF_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRF_SP0 field. #define BR_AIPS_PACRF_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRF_SP0. #define BF_AIPS_PACRF_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP0), uint32_t) & BM_AIPS_PACRF_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRF_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRG - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRG - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacrg { uint32_t U; struct _hw_aips_pacrg_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrg_t; #endif /*! * @name Constants and macros for entire AIPS_PACRG register */ //@{ #define HW_AIPS_PACRG_ADDR(x) (REGS_AIPS_BASE(x) + 0x48U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRG(x) (*(__IO hw_aips_pacrg_t *) HW_AIPS_PACRG_ADDR(x)) #define HW_AIPS_PACRG_RD(x) (HW_AIPS_PACRG(x).U) #define HW_AIPS_PACRG_WR(x, v) (HW_AIPS_PACRG(x).U = (v)) #define HW_AIPS_PACRG_SET(x, v) (HW_AIPS_PACRG_WR(x, HW_AIPS_PACRG_RD(x) | (v))) #define HW_AIPS_PACRG_CLR(x, v) (HW_AIPS_PACRG_WR(x, HW_AIPS_PACRG_RD(x) & ~(v))) #define HW_AIPS_PACRG_TOG(x, v) (HW_AIPS_PACRG_WR(x, HW_AIPS_PACRG_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRG bitfields */ /*! * @name Register AIPS_PACRG, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRG_TP7 (0U) //!< Bit position for AIPS_PACRG_TP7. #define BM_AIPS_PACRG_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRG_TP7. #define BS_AIPS_PACRG_TP7 (1U) //!< Bit field size in bits for AIPS_PACRG_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_TP7 field. #define BR_AIPS_PACRG_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRG_TP7. #define BF_AIPS_PACRG_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP7), uint32_t) & BM_AIPS_PACRG_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRG_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRG_WP7 (1U) //!< Bit position for AIPS_PACRG_WP7. #define BM_AIPS_PACRG_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRG_WP7. #define BS_AIPS_PACRG_WP7 (1U) //!< Bit field size in bits for AIPS_PACRG_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_WP7 field. #define BR_AIPS_PACRG_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRG_WP7. #define BF_AIPS_PACRG_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP7), uint32_t) & BM_AIPS_PACRG_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRG_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRG_SP7 (2U) //!< Bit position for AIPS_PACRG_SP7. #define BM_AIPS_PACRG_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRG_SP7. #define BS_AIPS_PACRG_SP7 (1U) //!< Bit field size in bits for AIPS_PACRG_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_SP7 field. #define BR_AIPS_PACRG_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRG_SP7. #define BF_AIPS_PACRG_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP7), uint32_t) & BM_AIPS_PACRG_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRG_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRG_TP6 (4U) //!< Bit position for AIPS_PACRG_TP6. #define BM_AIPS_PACRG_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRG_TP6. #define BS_AIPS_PACRG_TP6 (1U) //!< Bit field size in bits for AIPS_PACRG_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_TP6 field. #define BR_AIPS_PACRG_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRG_TP6. #define BF_AIPS_PACRG_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP6), uint32_t) & BM_AIPS_PACRG_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRG_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRG_WP6 (5U) //!< Bit position for AIPS_PACRG_WP6. #define BM_AIPS_PACRG_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRG_WP6. #define BS_AIPS_PACRG_WP6 (1U) //!< Bit field size in bits for AIPS_PACRG_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_WP6 field. #define BR_AIPS_PACRG_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRG_WP6. #define BF_AIPS_PACRG_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP6), uint32_t) & BM_AIPS_PACRG_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRG_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRG_SP6 (6U) //!< Bit position for AIPS_PACRG_SP6. #define BM_AIPS_PACRG_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRG_SP6. #define BS_AIPS_PACRG_SP6 (1U) //!< Bit field size in bits for AIPS_PACRG_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_SP6 field. #define BR_AIPS_PACRG_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRG_SP6. #define BF_AIPS_PACRG_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP6), uint32_t) & BM_AIPS_PACRG_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRG_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRG_TP5 (8U) //!< Bit position for AIPS_PACRG_TP5. #define BM_AIPS_PACRG_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRG_TP5. #define BS_AIPS_PACRG_TP5 (1U) //!< Bit field size in bits for AIPS_PACRG_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_TP5 field. #define BR_AIPS_PACRG_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRG_TP5. #define BF_AIPS_PACRG_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP5), uint32_t) & BM_AIPS_PACRG_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRG_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRG_WP5 (9U) //!< Bit position for AIPS_PACRG_WP5. #define BM_AIPS_PACRG_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRG_WP5. #define BS_AIPS_PACRG_WP5 (1U) //!< Bit field size in bits for AIPS_PACRG_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_WP5 field. #define BR_AIPS_PACRG_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRG_WP5. #define BF_AIPS_PACRG_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP5), uint32_t) & BM_AIPS_PACRG_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRG_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRG_SP5 (10U) //!< Bit position for AIPS_PACRG_SP5. #define BM_AIPS_PACRG_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRG_SP5. #define BS_AIPS_PACRG_SP5 (1U) //!< Bit field size in bits for AIPS_PACRG_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_SP5 field. #define BR_AIPS_PACRG_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRG_SP5. #define BF_AIPS_PACRG_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP5), uint32_t) & BM_AIPS_PACRG_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRG_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRG_TP4 (12U) //!< Bit position for AIPS_PACRG_TP4. #define BM_AIPS_PACRG_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRG_TP4. #define BS_AIPS_PACRG_TP4 (1U) //!< Bit field size in bits for AIPS_PACRG_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_TP4 field. #define BR_AIPS_PACRG_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRG_TP4. #define BF_AIPS_PACRG_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP4), uint32_t) & BM_AIPS_PACRG_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRG_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRG_WP4 (13U) //!< Bit position for AIPS_PACRG_WP4. #define BM_AIPS_PACRG_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRG_WP4. #define BS_AIPS_PACRG_WP4 (1U) //!< Bit field size in bits for AIPS_PACRG_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_WP4 field. #define BR_AIPS_PACRG_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRG_WP4. #define BF_AIPS_PACRG_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP4), uint32_t) & BM_AIPS_PACRG_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRG_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRG_SP4 (14U) //!< Bit position for AIPS_PACRG_SP4. #define BM_AIPS_PACRG_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRG_SP4. #define BS_AIPS_PACRG_SP4 (1U) //!< Bit field size in bits for AIPS_PACRG_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_SP4 field. #define BR_AIPS_PACRG_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRG_SP4. #define BF_AIPS_PACRG_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP4), uint32_t) & BM_AIPS_PACRG_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRG_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRG_TP3 (16U) //!< Bit position for AIPS_PACRG_TP3. #define BM_AIPS_PACRG_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRG_TP3. #define BS_AIPS_PACRG_TP3 (1U) //!< Bit field size in bits for AIPS_PACRG_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_TP3 field. #define BR_AIPS_PACRG_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRG_TP3. #define BF_AIPS_PACRG_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP3), uint32_t) & BM_AIPS_PACRG_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRG_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRG_WP3 (17U) //!< Bit position for AIPS_PACRG_WP3. #define BM_AIPS_PACRG_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRG_WP3. #define BS_AIPS_PACRG_WP3 (1U) //!< Bit field size in bits for AIPS_PACRG_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_WP3 field. #define BR_AIPS_PACRG_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRG_WP3. #define BF_AIPS_PACRG_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP3), uint32_t) & BM_AIPS_PACRG_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRG_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRG_SP3 (18U) //!< Bit position for AIPS_PACRG_SP3. #define BM_AIPS_PACRG_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRG_SP3. #define BS_AIPS_PACRG_SP3 (1U) //!< Bit field size in bits for AIPS_PACRG_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_SP3 field. #define BR_AIPS_PACRG_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRG_SP3. #define BF_AIPS_PACRG_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP3), uint32_t) & BM_AIPS_PACRG_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRG_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRG_TP2 (20U) //!< Bit position for AIPS_PACRG_TP2. #define BM_AIPS_PACRG_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRG_TP2. #define BS_AIPS_PACRG_TP2 (1U) //!< Bit field size in bits for AIPS_PACRG_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_TP2 field. #define BR_AIPS_PACRG_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRG_TP2. #define BF_AIPS_PACRG_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP2), uint32_t) & BM_AIPS_PACRG_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRG_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRG_WP2 (21U) //!< Bit position for AIPS_PACRG_WP2. #define BM_AIPS_PACRG_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRG_WP2. #define BS_AIPS_PACRG_WP2 (1U) //!< Bit field size in bits for AIPS_PACRG_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_WP2 field. #define BR_AIPS_PACRG_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRG_WP2. #define BF_AIPS_PACRG_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP2), uint32_t) & BM_AIPS_PACRG_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRG_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRG_SP2 (22U) //!< Bit position for AIPS_PACRG_SP2. #define BM_AIPS_PACRG_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRG_SP2. #define BS_AIPS_PACRG_SP2 (1U) //!< Bit field size in bits for AIPS_PACRG_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_SP2 field. #define BR_AIPS_PACRG_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRG_SP2. #define BF_AIPS_PACRG_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP2), uint32_t) & BM_AIPS_PACRG_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRG_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRG_TP1 (24U) //!< Bit position for AIPS_PACRG_TP1. #define BM_AIPS_PACRG_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRG_TP1. #define BS_AIPS_PACRG_TP1 (1U) //!< Bit field size in bits for AIPS_PACRG_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_TP1 field. #define BR_AIPS_PACRG_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRG_TP1. #define BF_AIPS_PACRG_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP1), uint32_t) & BM_AIPS_PACRG_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRG_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRG_WP1 (25U) //!< Bit position for AIPS_PACRG_WP1. #define BM_AIPS_PACRG_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRG_WP1. #define BS_AIPS_PACRG_WP1 (1U) //!< Bit field size in bits for AIPS_PACRG_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_WP1 field. #define BR_AIPS_PACRG_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRG_WP1. #define BF_AIPS_PACRG_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP1), uint32_t) & BM_AIPS_PACRG_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRG_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRG_SP1 (26U) //!< Bit position for AIPS_PACRG_SP1. #define BM_AIPS_PACRG_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRG_SP1. #define BS_AIPS_PACRG_SP1 (1U) //!< Bit field size in bits for AIPS_PACRG_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_SP1 field. #define BR_AIPS_PACRG_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRG_SP1. #define BF_AIPS_PACRG_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP1), uint32_t) & BM_AIPS_PACRG_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRG_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRG_TP0 (28U) //!< Bit position for AIPS_PACRG_TP0. #define BM_AIPS_PACRG_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRG_TP0. #define BS_AIPS_PACRG_TP0 (1U) //!< Bit field size in bits for AIPS_PACRG_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_TP0 field. #define BR_AIPS_PACRG_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRG_TP0. #define BF_AIPS_PACRG_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP0), uint32_t) & BM_AIPS_PACRG_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRG_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRG_WP0 (29U) //!< Bit position for AIPS_PACRG_WP0. #define BM_AIPS_PACRG_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRG_WP0. #define BS_AIPS_PACRG_WP0 (1U) //!< Bit field size in bits for AIPS_PACRG_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_WP0 field. #define BR_AIPS_PACRG_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRG_WP0. #define BF_AIPS_PACRG_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP0), uint32_t) & BM_AIPS_PACRG_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRG_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRG, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRG_SP0 (30U) //!< Bit position for AIPS_PACRG_SP0. #define BM_AIPS_PACRG_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRG_SP0. #define BS_AIPS_PACRG_SP0 (1U) //!< Bit field size in bits for AIPS_PACRG_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRG_SP0 field. #define BR_AIPS_PACRG_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRG_SP0. #define BF_AIPS_PACRG_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP0), uint32_t) & BM_AIPS_PACRG_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRG_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRH - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRH - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacrh { uint32_t U; struct _hw_aips_pacrh_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrh_t; #endif /*! * @name Constants and macros for entire AIPS_PACRH register */ //@{ #define HW_AIPS_PACRH_ADDR(x) (REGS_AIPS_BASE(x) + 0x4CU) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRH(x) (*(__IO hw_aips_pacrh_t *) HW_AIPS_PACRH_ADDR(x)) #define HW_AIPS_PACRH_RD(x) (HW_AIPS_PACRH(x).U) #define HW_AIPS_PACRH_WR(x, v) (HW_AIPS_PACRH(x).U = (v)) #define HW_AIPS_PACRH_SET(x, v) (HW_AIPS_PACRH_WR(x, HW_AIPS_PACRH_RD(x) | (v))) #define HW_AIPS_PACRH_CLR(x, v) (HW_AIPS_PACRH_WR(x, HW_AIPS_PACRH_RD(x) & ~(v))) #define HW_AIPS_PACRH_TOG(x, v) (HW_AIPS_PACRH_WR(x, HW_AIPS_PACRH_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRH bitfields */ /*! * @name Register AIPS_PACRH, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRH_TP7 (0U) //!< Bit position for AIPS_PACRH_TP7. #define BM_AIPS_PACRH_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRH_TP7. #define BS_AIPS_PACRH_TP7 (1U) //!< Bit field size in bits for AIPS_PACRH_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_TP7 field. #define BR_AIPS_PACRH_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRH_TP7. #define BF_AIPS_PACRH_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP7), uint32_t) & BM_AIPS_PACRH_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRH_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRH_WP7 (1U) //!< Bit position for AIPS_PACRH_WP7. #define BM_AIPS_PACRH_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRH_WP7. #define BS_AIPS_PACRH_WP7 (1U) //!< Bit field size in bits for AIPS_PACRH_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_WP7 field. #define BR_AIPS_PACRH_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRH_WP7. #define BF_AIPS_PACRH_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP7), uint32_t) & BM_AIPS_PACRH_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRH_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRH_SP7 (2U) //!< Bit position for AIPS_PACRH_SP7. #define BM_AIPS_PACRH_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRH_SP7. #define BS_AIPS_PACRH_SP7 (1U) //!< Bit field size in bits for AIPS_PACRH_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_SP7 field. #define BR_AIPS_PACRH_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRH_SP7. #define BF_AIPS_PACRH_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP7), uint32_t) & BM_AIPS_PACRH_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRH_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRH_TP6 (4U) //!< Bit position for AIPS_PACRH_TP6. #define BM_AIPS_PACRH_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRH_TP6. #define BS_AIPS_PACRH_TP6 (1U) //!< Bit field size in bits for AIPS_PACRH_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_TP6 field. #define BR_AIPS_PACRH_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRH_TP6. #define BF_AIPS_PACRH_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP6), uint32_t) & BM_AIPS_PACRH_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRH_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRH_WP6 (5U) //!< Bit position for AIPS_PACRH_WP6. #define BM_AIPS_PACRH_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRH_WP6. #define BS_AIPS_PACRH_WP6 (1U) //!< Bit field size in bits for AIPS_PACRH_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_WP6 field. #define BR_AIPS_PACRH_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRH_WP6. #define BF_AIPS_PACRH_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP6), uint32_t) & BM_AIPS_PACRH_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRH_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRH_SP6 (6U) //!< Bit position for AIPS_PACRH_SP6. #define BM_AIPS_PACRH_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRH_SP6. #define BS_AIPS_PACRH_SP6 (1U) //!< Bit field size in bits for AIPS_PACRH_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_SP6 field. #define BR_AIPS_PACRH_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRH_SP6. #define BF_AIPS_PACRH_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP6), uint32_t) & BM_AIPS_PACRH_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRH_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRH_TP5 (8U) //!< Bit position for AIPS_PACRH_TP5. #define BM_AIPS_PACRH_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRH_TP5. #define BS_AIPS_PACRH_TP5 (1U) //!< Bit field size in bits for AIPS_PACRH_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_TP5 field. #define BR_AIPS_PACRH_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRH_TP5. #define BF_AIPS_PACRH_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP5), uint32_t) & BM_AIPS_PACRH_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRH_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRH_WP5 (9U) //!< Bit position for AIPS_PACRH_WP5. #define BM_AIPS_PACRH_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRH_WP5. #define BS_AIPS_PACRH_WP5 (1U) //!< Bit field size in bits for AIPS_PACRH_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_WP5 field. #define BR_AIPS_PACRH_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRH_WP5. #define BF_AIPS_PACRH_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP5), uint32_t) & BM_AIPS_PACRH_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRH_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRH_SP5 (10U) //!< Bit position for AIPS_PACRH_SP5. #define BM_AIPS_PACRH_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRH_SP5. #define BS_AIPS_PACRH_SP5 (1U) //!< Bit field size in bits for AIPS_PACRH_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_SP5 field. #define BR_AIPS_PACRH_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRH_SP5. #define BF_AIPS_PACRH_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP5), uint32_t) & BM_AIPS_PACRH_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRH_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRH_TP4 (12U) //!< Bit position for AIPS_PACRH_TP4. #define BM_AIPS_PACRH_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRH_TP4. #define BS_AIPS_PACRH_TP4 (1U) //!< Bit field size in bits for AIPS_PACRH_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_TP4 field. #define BR_AIPS_PACRH_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRH_TP4. #define BF_AIPS_PACRH_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP4), uint32_t) & BM_AIPS_PACRH_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRH_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRH_WP4 (13U) //!< Bit position for AIPS_PACRH_WP4. #define BM_AIPS_PACRH_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRH_WP4. #define BS_AIPS_PACRH_WP4 (1U) //!< Bit field size in bits for AIPS_PACRH_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_WP4 field. #define BR_AIPS_PACRH_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRH_WP4. #define BF_AIPS_PACRH_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP4), uint32_t) & BM_AIPS_PACRH_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRH_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRH_SP4 (14U) //!< Bit position for AIPS_PACRH_SP4. #define BM_AIPS_PACRH_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRH_SP4. #define BS_AIPS_PACRH_SP4 (1U) //!< Bit field size in bits for AIPS_PACRH_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_SP4 field. #define BR_AIPS_PACRH_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRH_SP4. #define BF_AIPS_PACRH_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP4), uint32_t) & BM_AIPS_PACRH_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRH_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRH_TP3 (16U) //!< Bit position for AIPS_PACRH_TP3. #define BM_AIPS_PACRH_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRH_TP3. #define BS_AIPS_PACRH_TP3 (1U) //!< Bit field size in bits for AIPS_PACRH_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_TP3 field. #define BR_AIPS_PACRH_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRH_TP3. #define BF_AIPS_PACRH_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP3), uint32_t) & BM_AIPS_PACRH_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRH_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRH_WP3 (17U) //!< Bit position for AIPS_PACRH_WP3. #define BM_AIPS_PACRH_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRH_WP3. #define BS_AIPS_PACRH_WP3 (1U) //!< Bit field size in bits for AIPS_PACRH_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_WP3 field. #define BR_AIPS_PACRH_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRH_WP3. #define BF_AIPS_PACRH_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP3), uint32_t) & BM_AIPS_PACRH_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRH_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRH_SP3 (18U) //!< Bit position for AIPS_PACRH_SP3. #define BM_AIPS_PACRH_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRH_SP3. #define BS_AIPS_PACRH_SP3 (1U) //!< Bit field size in bits for AIPS_PACRH_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_SP3 field. #define BR_AIPS_PACRH_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRH_SP3. #define BF_AIPS_PACRH_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP3), uint32_t) & BM_AIPS_PACRH_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRH_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRH_TP2 (20U) //!< Bit position for AIPS_PACRH_TP2. #define BM_AIPS_PACRH_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRH_TP2. #define BS_AIPS_PACRH_TP2 (1U) //!< Bit field size in bits for AIPS_PACRH_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_TP2 field. #define BR_AIPS_PACRH_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRH_TP2. #define BF_AIPS_PACRH_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP2), uint32_t) & BM_AIPS_PACRH_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRH_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRH_WP2 (21U) //!< Bit position for AIPS_PACRH_WP2. #define BM_AIPS_PACRH_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRH_WP2. #define BS_AIPS_PACRH_WP2 (1U) //!< Bit field size in bits for AIPS_PACRH_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_WP2 field. #define BR_AIPS_PACRH_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRH_WP2. #define BF_AIPS_PACRH_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP2), uint32_t) & BM_AIPS_PACRH_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRH_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRH_SP2 (22U) //!< Bit position for AIPS_PACRH_SP2. #define BM_AIPS_PACRH_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRH_SP2. #define BS_AIPS_PACRH_SP2 (1U) //!< Bit field size in bits for AIPS_PACRH_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_SP2 field. #define BR_AIPS_PACRH_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRH_SP2. #define BF_AIPS_PACRH_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP2), uint32_t) & BM_AIPS_PACRH_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRH_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRH_TP1 (24U) //!< Bit position for AIPS_PACRH_TP1. #define BM_AIPS_PACRH_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRH_TP1. #define BS_AIPS_PACRH_TP1 (1U) //!< Bit field size in bits for AIPS_PACRH_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_TP1 field. #define BR_AIPS_PACRH_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRH_TP1. #define BF_AIPS_PACRH_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP1), uint32_t) & BM_AIPS_PACRH_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRH_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRH_WP1 (25U) //!< Bit position for AIPS_PACRH_WP1. #define BM_AIPS_PACRH_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRH_WP1. #define BS_AIPS_PACRH_WP1 (1U) //!< Bit field size in bits for AIPS_PACRH_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_WP1 field. #define BR_AIPS_PACRH_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRH_WP1. #define BF_AIPS_PACRH_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP1), uint32_t) & BM_AIPS_PACRH_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRH_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRH_SP1 (26U) //!< Bit position for AIPS_PACRH_SP1. #define BM_AIPS_PACRH_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRH_SP1. #define BS_AIPS_PACRH_SP1 (1U) //!< Bit field size in bits for AIPS_PACRH_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_SP1 field. #define BR_AIPS_PACRH_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRH_SP1. #define BF_AIPS_PACRH_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP1), uint32_t) & BM_AIPS_PACRH_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRH_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRH_TP0 (28U) //!< Bit position for AIPS_PACRH_TP0. #define BM_AIPS_PACRH_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRH_TP0. #define BS_AIPS_PACRH_TP0 (1U) //!< Bit field size in bits for AIPS_PACRH_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_TP0 field. #define BR_AIPS_PACRH_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRH_TP0. #define BF_AIPS_PACRH_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP0), uint32_t) & BM_AIPS_PACRH_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRH_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRH_WP0 (29U) //!< Bit position for AIPS_PACRH_WP0. #define BM_AIPS_PACRH_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRH_WP0. #define BS_AIPS_PACRH_WP0 (1U) //!< Bit field size in bits for AIPS_PACRH_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_WP0 field. #define BR_AIPS_PACRH_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRH_WP0. #define BF_AIPS_PACRH_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP0), uint32_t) & BM_AIPS_PACRH_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRH_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRH, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRH_SP0 (30U) //!< Bit position for AIPS_PACRH_SP0. #define BM_AIPS_PACRH_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRH_SP0. #define BS_AIPS_PACRH_SP0 (1U) //!< Bit field size in bits for AIPS_PACRH_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRH_SP0 field. #define BR_AIPS_PACRH_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRH_SP0. #define BF_AIPS_PACRH_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP0), uint32_t) & BM_AIPS_PACRH_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRH_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRI - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRI - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacri { uint32_t U; struct _hw_aips_pacri_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacri_t; #endif /*! * @name Constants and macros for entire AIPS_PACRI register */ //@{ #define HW_AIPS_PACRI_ADDR(x) (REGS_AIPS_BASE(x) + 0x50U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRI(x) (*(__IO hw_aips_pacri_t *) HW_AIPS_PACRI_ADDR(x)) #define HW_AIPS_PACRI_RD(x) (HW_AIPS_PACRI(x).U) #define HW_AIPS_PACRI_WR(x, v) (HW_AIPS_PACRI(x).U = (v)) #define HW_AIPS_PACRI_SET(x, v) (HW_AIPS_PACRI_WR(x, HW_AIPS_PACRI_RD(x) | (v))) #define HW_AIPS_PACRI_CLR(x, v) (HW_AIPS_PACRI_WR(x, HW_AIPS_PACRI_RD(x) & ~(v))) #define HW_AIPS_PACRI_TOG(x, v) (HW_AIPS_PACRI_WR(x, HW_AIPS_PACRI_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRI bitfields */ /*! * @name Register AIPS_PACRI, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRI_TP7 (0U) //!< Bit position for AIPS_PACRI_TP7. #define BM_AIPS_PACRI_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRI_TP7. #define BS_AIPS_PACRI_TP7 (1U) //!< Bit field size in bits for AIPS_PACRI_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_TP7 field. #define BR_AIPS_PACRI_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRI_TP7. #define BF_AIPS_PACRI_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP7), uint32_t) & BM_AIPS_PACRI_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRI_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRI_WP7 (1U) //!< Bit position for AIPS_PACRI_WP7. #define BM_AIPS_PACRI_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRI_WP7. #define BS_AIPS_PACRI_WP7 (1U) //!< Bit field size in bits for AIPS_PACRI_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_WP7 field. #define BR_AIPS_PACRI_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRI_WP7. #define BF_AIPS_PACRI_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP7), uint32_t) & BM_AIPS_PACRI_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRI_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRI_SP7 (2U) //!< Bit position for AIPS_PACRI_SP7. #define BM_AIPS_PACRI_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRI_SP7. #define BS_AIPS_PACRI_SP7 (1U) //!< Bit field size in bits for AIPS_PACRI_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_SP7 field. #define BR_AIPS_PACRI_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRI_SP7. #define BF_AIPS_PACRI_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP7), uint32_t) & BM_AIPS_PACRI_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRI_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRI_TP6 (4U) //!< Bit position for AIPS_PACRI_TP6. #define BM_AIPS_PACRI_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRI_TP6. #define BS_AIPS_PACRI_TP6 (1U) //!< Bit field size in bits for AIPS_PACRI_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_TP6 field. #define BR_AIPS_PACRI_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRI_TP6. #define BF_AIPS_PACRI_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP6), uint32_t) & BM_AIPS_PACRI_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRI_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRI_WP6 (5U) //!< Bit position for AIPS_PACRI_WP6. #define BM_AIPS_PACRI_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRI_WP6. #define BS_AIPS_PACRI_WP6 (1U) //!< Bit field size in bits for AIPS_PACRI_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_WP6 field. #define BR_AIPS_PACRI_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRI_WP6. #define BF_AIPS_PACRI_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP6), uint32_t) & BM_AIPS_PACRI_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRI_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRI_SP6 (6U) //!< Bit position for AIPS_PACRI_SP6. #define BM_AIPS_PACRI_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRI_SP6. #define BS_AIPS_PACRI_SP6 (1U) //!< Bit field size in bits for AIPS_PACRI_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_SP6 field. #define BR_AIPS_PACRI_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRI_SP6. #define BF_AIPS_PACRI_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP6), uint32_t) & BM_AIPS_PACRI_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRI_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRI_TP5 (8U) //!< Bit position for AIPS_PACRI_TP5. #define BM_AIPS_PACRI_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRI_TP5. #define BS_AIPS_PACRI_TP5 (1U) //!< Bit field size in bits for AIPS_PACRI_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_TP5 field. #define BR_AIPS_PACRI_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRI_TP5. #define BF_AIPS_PACRI_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP5), uint32_t) & BM_AIPS_PACRI_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRI_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRI_WP5 (9U) //!< Bit position for AIPS_PACRI_WP5. #define BM_AIPS_PACRI_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRI_WP5. #define BS_AIPS_PACRI_WP5 (1U) //!< Bit field size in bits for AIPS_PACRI_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_WP5 field. #define BR_AIPS_PACRI_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRI_WP5. #define BF_AIPS_PACRI_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP5), uint32_t) & BM_AIPS_PACRI_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRI_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRI_SP5 (10U) //!< Bit position for AIPS_PACRI_SP5. #define BM_AIPS_PACRI_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRI_SP5. #define BS_AIPS_PACRI_SP5 (1U) //!< Bit field size in bits for AIPS_PACRI_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_SP5 field. #define BR_AIPS_PACRI_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRI_SP5. #define BF_AIPS_PACRI_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP5), uint32_t) & BM_AIPS_PACRI_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRI_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRI_TP4 (12U) //!< Bit position for AIPS_PACRI_TP4. #define BM_AIPS_PACRI_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRI_TP4. #define BS_AIPS_PACRI_TP4 (1U) //!< Bit field size in bits for AIPS_PACRI_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_TP4 field. #define BR_AIPS_PACRI_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRI_TP4. #define BF_AIPS_PACRI_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP4), uint32_t) & BM_AIPS_PACRI_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRI_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRI_WP4 (13U) //!< Bit position for AIPS_PACRI_WP4. #define BM_AIPS_PACRI_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRI_WP4. #define BS_AIPS_PACRI_WP4 (1U) //!< Bit field size in bits for AIPS_PACRI_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_WP4 field. #define BR_AIPS_PACRI_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRI_WP4. #define BF_AIPS_PACRI_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP4), uint32_t) & BM_AIPS_PACRI_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRI_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRI_SP4 (14U) //!< Bit position for AIPS_PACRI_SP4. #define BM_AIPS_PACRI_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRI_SP4. #define BS_AIPS_PACRI_SP4 (1U) //!< Bit field size in bits for AIPS_PACRI_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_SP4 field. #define BR_AIPS_PACRI_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRI_SP4. #define BF_AIPS_PACRI_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP4), uint32_t) & BM_AIPS_PACRI_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRI_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRI_TP3 (16U) //!< Bit position for AIPS_PACRI_TP3. #define BM_AIPS_PACRI_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRI_TP3. #define BS_AIPS_PACRI_TP3 (1U) //!< Bit field size in bits for AIPS_PACRI_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_TP3 field. #define BR_AIPS_PACRI_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRI_TP3. #define BF_AIPS_PACRI_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP3), uint32_t) & BM_AIPS_PACRI_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRI_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRI_WP3 (17U) //!< Bit position for AIPS_PACRI_WP3. #define BM_AIPS_PACRI_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRI_WP3. #define BS_AIPS_PACRI_WP3 (1U) //!< Bit field size in bits for AIPS_PACRI_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_WP3 field. #define BR_AIPS_PACRI_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRI_WP3. #define BF_AIPS_PACRI_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP3), uint32_t) & BM_AIPS_PACRI_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRI_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRI_SP3 (18U) //!< Bit position for AIPS_PACRI_SP3. #define BM_AIPS_PACRI_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRI_SP3. #define BS_AIPS_PACRI_SP3 (1U) //!< Bit field size in bits for AIPS_PACRI_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_SP3 field. #define BR_AIPS_PACRI_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRI_SP3. #define BF_AIPS_PACRI_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP3), uint32_t) & BM_AIPS_PACRI_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRI_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRI_TP2 (20U) //!< Bit position for AIPS_PACRI_TP2. #define BM_AIPS_PACRI_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRI_TP2. #define BS_AIPS_PACRI_TP2 (1U) //!< Bit field size in bits for AIPS_PACRI_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_TP2 field. #define BR_AIPS_PACRI_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRI_TP2. #define BF_AIPS_PACRI_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP2), uint32_t) & BM_AIPS_PACRI_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRI_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRI_WP2 (21U) //!< Bit position for AIPS_PACRI_WP2. #define BM_AIPS_PACRI_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRI_WP2. #define BS_AIPS_PACRI_WP2 (1U) //!< Bit field size in bits for AIPS_PACRI_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_WP2 field. #define BR_AIPS_PACRI_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRI_WP2. #define BF_AIPS_PACRI_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP2), uint32_t) & BM_AIPS_PACRI_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRI_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRI_SP2 (22U) //!< Bit position for AIPS_PACRI_SP2. #define BM_AIPS_PACRI_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRI_SP2. #define BS_AIPS_PACRI_SP2 (1U) //!< Bit field size in bits for AIPS_PACRI_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_SP2 field. #define BR_AIPS_PACRI_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRI_SP2. #define BF_AIPS_PACRI_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP2), uint32_t) & BM_AIPS_PACRI_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRI_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRI_TP1 (24U) //!< Bit position for AIPS_PACRI_TP1. #define BM_AIPS_PACRI_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRI_TP1. #define BS_AIPS_PACRI_TP1 (1U) //!< Bit field size in bits for AIPS_PACRI_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_TP1 field. #define BR_AIPS_PACRI_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRI_TP1. #define BF_AIPS_PACRI_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP1), uint32_t) & BM_AIPS_PACRI_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRI_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRI_WP1 (25U) //!< Bit position for AIPS_PACRI_WP1. #define BM_AIPS_PACRI_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRI_WP1. #define BS_AIPS_PACRI_WP1 (1U) //!< Bit field size in bits for AIPS_PACRI_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_WP1 field. #define BR_AIPS_PACRI_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRI_WP1. #define BF_AIPS_PACRI_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP1), uint32_t) & BM_AIPS_PACRI_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRI_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRI_SP1 (26U) //!< Bit position for AIPS_PACRI_SP1. #define BM_AIPS_PACRI_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRI_SP1. #define BS_AIPS_PACRI_SP1 (1U) //!< Bit field size in bits for AIPS_PACRI_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_SP1 field. #define BR_AIPS_PACRI_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRI_SP1. #define BF_AIPS_PACRI_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP1), uint32_t) & BM_AIPS_PACRI_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRI_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRI_TP0 (28U) //!< Bit position for AIPS_PACRI_TP0. #define BM_AIPS_PACRI_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRI_TP0. #define BS_AIPS_PACRI_TP0 (1U) //!< Bit field size in bits for AIPS_PACRI_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_TP0 field. #define BR_AIPS_PACRI_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRI_TP0. #define BF_AIPS_PACRI_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP0), uint32_t) & BM_AIPS_PACRI_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRI_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRI_WP0 (29U) //!< Bit position for AIPS_PACRI_WP0. #define BM_AIPS_PACRI_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRI_WP0. #define BS_AIPS_PACRI_WP0 (1U) //!< Bit field size in bits for AIPS_PACRI_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_WP0 field. #define BR_AIPS_PACRI_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRI_WP0. #define BF_AIPS_PACRI_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP0), uint32_t) & BM_AIPS_PACRI_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRI_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRI, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRI_SP0 (30U) //!< Bit position for AIPS_PACRI_SP0. #define BM_AIPS_PACRI_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRI_SP0. #define BS_AIPS_PACRI_SP0 (1U) //!< Bit field size in bits for AIPS_PACRI_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRI_SP0 field. #define BR_AIPS_PACRI_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRI_SP0. #define BF_AIPS_PACRI_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP0), uint32_t) & BM_AIPS_PACRI_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRI_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRJ - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRJ - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacrj { uint32_t U; struct _hw_aips_pacrj_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrj_t; #endif /*! * @name Constants and macros for entire AIPS_PACRJ register */ //@{ #define HW_AIPS_PACRJ_ADDR(x) (REGS_AIPS_BASE(x) + 0x54U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRJ(x) (*(__IO hw_aips_pacrj_t *) HW_AIPS_PACRJ_ADDR(x)) #define HW_AIPS_PACRJ_RD(x) (HW_AIPS_PACRJ(x).U) #define HW_AIPS_PACRJ_WR(x, v) (HW_AIPS_PACRJ(x).U = (v)) #define HW_AIPS_PACRJ_SET(x, v) (HW_AIPS_PACRJ_WR(x, HW_AIPS_PACRJ_RD(x) | (v))) #define HW_AIPS_PACRJ_CLR(x, v) (HW_AIPS_PACRJ_WR(x, HW_AIPS_PACRJ_RD(x) & ~(v))) #define HW_AIPS_PACRJ_TOG(x, v) (HW_AIPS_PACRJ_WR(x, HW_AIPS_PACRJ_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRJ bitfields */ /*! * @name Register AIPS_PACRJ, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRJ_TP7 (0U) //!< Bit position for AIPS_PACRJ_TP7. #define BM_AIPS_PACRJ_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRJ_TP7. #define BS_AIPS_PACRJ_TP7 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_TP7 field. #define BR_AIPS_PACRJ_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRJ_TP7. #define BF_AIPS_PACRJ_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP7), uint32_t) & BM_AIPS_PACRJ_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRJ_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRJ_WP7 (1U) //!< Bit position for AIPS_PACRJ_WP7. #define BM_AIPS_PACRJ_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRJ_WP7. #define BS_AIPS_PACRJ_WP7 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_WP7 field. #define BR_AIPS_PACRJ_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRJ_WP7. #define BF_AIPS_PACRJ_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP7), uint32_t) & BM_AIPS_PACRJ_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRJ_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRJ_SP7 (2U) //!< Bit position for AIPS_PACRJ_SP7. #define BM_AIPS_PACRJ_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRJ_SP7. #define BS_AIPS_PACRJ_SP7 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_SP7 field. #define BR_AIPS_PACRJ_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRJ_SP7. #define BF_AIPS_PACRJ_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP7), uint32_t) & BM_AIPS_PACRJ_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRJ_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRJ_TP6 (4U) //!< Bit position for AIPS_PACRJ_TP6. #define BM_AIPS_PACRJ_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRJ_TP6. #define BS_AIPS_PACRJ_TP6 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_TP6 field. #define BR_AIPS_PACRJ_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRJ_TP6. #define BF_AIPS_PACRJ_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP6), uint32_t) & BM_AIPS_PACRJ_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRJ_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRJ_WP6 (5U) //!< Bit position for AIPS_PACRJ_WP6. #define BM_AIPS_PACRJ_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRJ_WP6. #define BS_AIPS_PACRJ_WP6 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_WP6 field. #define BR_AIPS_PACRJ_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRJ_WP6. #define BF_AIPS_PACRJ_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP6), uint32_t) & BM_AIPS_PACRJ_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRJ_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRJ_SP6 (6U) //!< Bit position for AIPS_PACRJ_SP6. #define BM_AIPS_PACRJ_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRJ_SP6. #define BS_AIPS_PACRJ_SP6 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_SP6 field. #define BR_AIPS_PACRJ_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRJ_SP6. #define BF_AIPS_PACRJ_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP6), uint32_t) & BM_AIPS_PACRJ_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRJ_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRJ_TP5 (8U) //!< Bit position for AIPS_PACRJ_TP5. #define BM_AIPS_PACRJ_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRJ_TP5. #define BS_AIPS_PACRJ_TP5 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_TP5 field. #define BR_AIPS_PACRJ_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRJ_TP5. #define BF_AIPS_PACRJ_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP5), uint32_t) & BM_AIPS_PACRJ_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRJ_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRJ_WP5 (9U) //!< Bit position for AIPS_PACRJ_WP5. #define BM_AIPS_PACRJ_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRJ_WP5. #define BS_AIPS_PACRJ_WP5 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_WP5 field. #define BR_AIPS_PACRJ_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRJ_WP5. #define BF_AIPS_PACRJ_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP5), uint32_t) & BM_AIPS_PACRJ_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRJ_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRJ_SP5 (10U) //!< Bit position for AIPS_PACRJ_SP5. #define BM_AIPS_PACRJ_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRJ_SP5. #define BS_AIPS_PACRJ_SP5 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_SP5 field. #define BR_AIPS_PACRJ_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRJ_SP5. #define BF_AIPS_PACRJ_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP5), uint32_t) & BM_AIPS_PACRJ_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRJ_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRJ_TP4 (12U) //!< Bit position for AIPS_PACRJ_TP4. #define BM_AIPS_PACRJ_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRJ_TP4. #define BS_AIPS_PACRJ_TP4 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_TP4 field. #define BR_AIPS_PACRJ_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRJ_TP4. #define BF_AIPS_PACRJ_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP4), uint32_t) & BM_AIPS_PACRJ_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRJ_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRJ_WP4 (13U) //!< Bit position for AIPS_PACRJ_WP4. #define BM_AIPS_PACRJ_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRJ_WP4. #define BS_AIPS_PACRJ_WP4 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_WP4 field. #define BR_AIPS_PACRJ_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRJ_WP4. #define BF_AIPS_PACRJ_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP4), uint32_t) & BM_AIPS_PACRJ_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRJ_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRJ_SP4 (14U) //!< Bit position for AIPS_PACRJ_SP4. #define BM_AIPS_PACRJ_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRJ_SP4. #define BS_AIPS_PACRJ_SP4 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_SP4 field. #define BR_AIPS_PACRJ_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRJ_SP4. #define BF_AIPS_PACRJ_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP4), uint32_t) & BM_AIPS_PACRJ_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRJ_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRJ_TP3 (16U) //!< Bit position for AIPS_PACRJ_TP3. #define BM_AIPS_PACRJ_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRJ_TP3. #define BS_AIPS_PACRJ_TP3 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_TP3 field. #define BR_AIPS_PACRJ_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRJ_TP3. #define BF_AIPS_PACRJ_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP3), uint32_t) & BM_AIPS_PACRJ_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRJ_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRJ_WP3 (17U) //!< Bit position for AIPS_PACRJ_WP3. #define BM_AIPS_PACRJ_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRJ_WP3. #define BS_AIPS_PACRJ_WP3 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_WP3 field. #define BR_AIPS_PACRJ_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRJ_WP3. #define BF_AIPS_PACRJ_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP3), uint32_t) & BM_AIPS_PACRJ_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRJ_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRJ_SP3 (18U) //!< Bit position for AIPS_PACRJ_SP3. #define BM_AIPS_PACRJ_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRJ_SP3. #define BS_AIPS_PACRJ_SP3 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_SP3 field. #define BR_AIPS_PACRJ_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRJ_SP3. #define BF_AIPS_PACRJ_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP3), uint32_t) & BM_AIPS_PACRJ_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRJ_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRJ_TP2 (20U) //!< Bit position for AIPS_PACRJ_TP2. #define BM_AIPS_PACRJ_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRJ_TP2. #define BS_AIPS_PACRJ_TP2 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_TP2 field. #define BR_AIPS_PACRJ_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRJ_TP2. #define BF_AIPS_PACRJ_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP2), uint32_t) & BM_AIPS_PACRJ_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRJ_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRJ_WP2 (21U) //!< Bit position for AIPS_PACRJ_WP2. #define BM_AIPS_PACRJ_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRJ_WP2. #define BS_AIPS_PACRJ_WP2 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_WP2 field. #define BR_AIPS_PACRJ_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRJ_WP2. #define BF_AIPS_PACRJ_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP2), uint32_t) & BM_AIPS_PACRJ_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRJ_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRJ_SP2 (22U) //!< Bit position for AIPS_PACRJ_SP2. #define BM_AIPS_PACRJ_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRJ_SP2. #define BS_AIPS_PACRJ_SP2 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_SP2 field. #define BR_AIPS_PACRJ_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRJ_SP2. #define BF_AIPS_PACRJ_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP2), uint32_t) & BM_AIPS_PACRJ_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRJ_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRJ_TP1 (24U) //!< Bit position for AIPS_PACRJ_TP1. #define BM_AIPS_PACRJ_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRJ_TP1. #define BS_AIPS_PACRJ_TP1 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_TP1 field. #define BR_AIPS_PACRJ_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRJ_TP1. #define BF_AIPS_PACRJ_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP1), uint32_t) & BM_AIPS_PACRJ_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRJ_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRJ_WP1 (25U) //!< Bit position for AIPS_PACRJ_WP1. #define BM_AIPS_PACRJ_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRJ_WP1. #define BS_AIPS_PACRJ_WP1 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_WP1 field. #define BR_AIPS_PACRJ_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRJ_WP1. #define BF_AIPS_PACRJ_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP1), uint32_t) & BM_AIPS_PACRJ_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRJ_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRJ_SP1 (26U) //!< Bit position for AIPS_PACRJ_SP1. #define BM_AIPS_PACRJ_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRJ_SP1. #define BS_AIPS_PACRJ_SP1 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_SP1 field. #define BR_AIPS_PACRJ_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRJ_SP1. #define BF_AIPS_PACRJ_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP1), uint32_t) & BM_AIPS_PACRJ_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRJ_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRJ_TP0 (28U) //!< Bit position for AIPS_PACRJ_TP0. #define BM_AIPS_PACRJ_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRJ_TP0. #define BS_AIPS_PACRJ_TP0 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_TP0 field. #define BR_AIPS_PACRJ_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRJ_TP0. #define BF_AIPS_PACRJ_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP0), uint32_t) & BM_AIPS_PACRJ_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRJ_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRJ_WP0 (29U) //!< Bit position for AIPS_PACRJ_WP0. #define BM_AIPS_PACRJ_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRJ_WP0. #define BS_AIPS_PACRJ_WP0 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_WP0 field. #define BR_AIPS_PACRJ_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRJ_WP0. #define BF_AIPS_PACRJ_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP0), uint32_t) & BM_AIPS_PACRJ_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRJ_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRJ, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRJ_SP0 (30U) //!< Bit position for AIPS_PACRJ_SP0. #define BM_AIPS_PACRJ_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRJ_SP0. #define BS_AIPS_PACRJ_SP0 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRJ_SP0 field. #define BR_AIPS_PACRJ_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRJ_SP0. #define BF_AIPS_PACRJ_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP0), uint32_t) & BM_AIPS_PACRJ_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRJ_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRK - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRK - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacrk { uint32_t U; struct _hw_aips_pacrk_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrk_t; #endif /*! * @name Constants and macros for entire AIPS_PACRK register */ //@{ #define HW_AIPS_PACRK_ADDR(x) (REGS_AIPS_BASE(x) + 0x58U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRK(x) (*(__IO hw_aips_pacrk_t *) HW_AIPS_PACRK_ADDR(x)) #define HW_AIPS_PACRK_RD(x) (HW_AIPS_PACRK(x).U) #define HW_AIPS_PACRK_WR(x, v) (HW_AIPS_PACRK(x).U = (v)) #define HW_AIPS_PACRK_SET(x, v) (HW_AIPS_PACRK_WR(x, HW_AIPS_PACRK_RD(x) | (v))) #define HW_AIPS_PACRK_CLR(x, v) (HW_AIPS_PACRK_WR(x, HW_AIPS_PACRK_RD(x) & ~(v))) #define HW_AIPS_PACRK_TOG(x, v) (HW_AIPS_PACRK_WR(x, HW_AIPS_PACRK_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRK bitfields */ /*! * @name Register AIPS_PACRK, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRK_TP7 (0U) //!< Bit position for AIPS_PACRK_TP7. #define BM_AIPS_PACRK_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRK_TP7. #define BS_AIPS_PACRK_TP7 (1U) //!< Bit field size in bits for AIPS_PACRK_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_TP7 field. #define BR_AIPS_PACRK_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRK_TP7. #define BF_AIPS_PACRK_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP7), uint32_t) & BM_AIPS_PACRK_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRK_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRK_WP7 (1U) //!< Bit position for AIPS_PACRK_WP7. #define BM_AIPS_PACRK_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRK_WP7. #define BS_AIPS_PACRK_WP7 (1U) //!< Bit field size in bits for AIPS_PACRK_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_WP7 field. #define BR_AIPS_PACRK_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRK_WP7. #define BF_AIPS_PACRK_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP7), uint32_t) & BM_AIPS_PACRK_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRK_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRK_SP7 (2U) //!< Bit position for AIPS_PACRK_SP7. #define BM_AIPS_PACRK_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRK_SP7. #define BS_AIPS_PACRK_SP7 (1U) //!< Bit field size in bits for AIPS_PACRK_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_SP7 field. #define BR_AIPS_PACRK_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRK_SP7. #define BF_AIPS_PACRK_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP7), uint32_t) & BM_AIPS_PACRK_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRK_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRK_TP6 (4U) //!< Bit position for AIPS_PACRK_TP6. #define BM_AIPS_PACRK_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRK_TP6. #define BS_AIPS_PACRK_TP6 (1U) //!< Bit field size in bits for AIPS_PACRK_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_TP6 field. #define BR_AIPS_PACRK_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRK_TP6. #define BF_AIPS_PACRK_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP6), uint32_t) & BM_AIPS_PACRK_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRK_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRK_WP6 (5U) //!< Bit position for AIPS_PACRK_WP6. #define BM_AIPS_PACRK_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRK_WP6. #define BS_AIPS_PACRK_WP6 (1U) //!< Bit field size in bits for AIPS_PACRK_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_WP6 field. #define BR_AIPS_PACRK_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRK_WP6. #define BF_AIPS_PACRK_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP6), uint32_t) & BM_AIPS_PACRK_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRK_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRK_SP6 (6U) //!< Bit position for AIPS_PACRK_SP6. #define BM_AIPS_PACRK_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRK_SP6. #define BS_AIPS_PACRK_SP6 (1U) //!< Bit field size in bits for AIPS_PACRK_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_SP6 field. #define BR_AIPS_PACRK_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRK_SP6. #define BF_AIPS_PACRK_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP6), uint32_t) & BM_AIPS_PACRK_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRK_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRK_TP5 (8U) //!< Bit position for AIPS_PACRK_TP5. #define BM_AIPS_PACRK_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRK_TP5. #define BS_AIPS_PACRK_TP5 (1U) //!< Bit field size in bits for AIPS_PACRK_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_TP5 field. #define BR_AIPS_PACRK_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRK_TP5. #define BF_AIPS_PACRK_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP5), uint32_t) & BM_AIPS_PACRK_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRK_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRK_WP5 (9U) //!< Bit position for AIPS_PACRK_WP5. #define BM_AIPS_PACRK_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRK_WP5. #define BS_AIPS_PACRK_WP5 (1U) //!< Bit field size in bits for AIPS_PACRK_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_WP5 field. #define BR_AIPS_PACRK_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRK_WP5. #define BF_AIPS_PACRK_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP5), uint32_t) & BM_AIPS_PACRK_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRK_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRK_SP5 (10U) //!< Bit position for AIPS_PACRK_SP5. #define BM_AIPS_PACRK_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRK_SP5. #define BS_AIPS_PACRK_SP5 (1U) //!< Bit field size in bits for AIPS_PACRK_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_SP5 field. #define BR_AIPS_PACRK_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRK_SP5. #define BF_AIPS_PACRK_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP5), uint32_t) & BM_AIPS_PACRK_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRK_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRK_TP4 (12U) //!< Bit position for AIPS_PACRK_TP4. #define BM_AIPS_PACRK_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRK_TP4. #define BS_AIPS_PACRK_TP4 (1U) //!< Bit field size in bits for AIPS_PACRK_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_TP4 field. #define BR_AIPS_PACRK_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRK_TP4. #define BF_AIPS_PACRK_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP4), uint32_t) & BM_AIPS_PACRK_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRK_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRK_WP4 (13U) //!< Bit position for AIPS_PACRK_WP4. #define BM_AIPS_PACRK_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRK_WP4. #define BS_AIPS_PACRK_WP4 (1U) //!< Bit field size in bits for AIPS_PACRK_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_WP4 field. #define BR_AIPS_PACRK_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRK_WP4. #define BF_AIPS_PACRK_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP4), uint32_t) & BM_AIPS_PACRK_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRK_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRK_SP4 (14U) //!< Bit position for AIPS_PACRK_SP4. #define BM_AIPS_PACRK_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRK_SP4. #define BS_AIPS_PACRK_SP4 (1U) //!< Bit field size in bits for AIPS_PACRK_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_SP4 field. #define BR_AIPS_PACRK_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRK_SP4. #define BF_AIPS_PACRK_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP4), uint32_t) & BM_AIPS_PACRK_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRK_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRK_TP3 (16U) //!< Bit position for AIPS_PACRK_TP3. #define BM_AIPS_PACRK_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRK_TP3. #define BS_AIPS_PACRK_TP3 (1U) //!< Bit field size in bits for AIPS_PACRK_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_TP3 field. #define BR_AIPS_PACRK_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRK_TP3. #define BF_AIPS_PACRK_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP3), uint32_t) & BM_AIPS_PACRK_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRK_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRK_WP3 (17U) //!< Bit position for AIPS_PACRK_WP3. #define BM_AIPS_PACRK_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRK_WP3. #define BS_AIPS_PACRK_WP3 (1U) //!< Bit field size in bits for AIPS_PACRK_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_WP3 field. #define BR_AIPS_PACRK_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRK_WP3. #define BF_AIPS_PACRK_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP3), uint32_t) & BM_AIPS_PACRK_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRK_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRK_SP3 (18U) //!< Bit position for AIPS_PACRK_SP3. #define BM_AIPS_PACRK_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRK_SP3. #define BS_AIPS_PACRK_SP3 (1U) //!< Bit field size in bits for AIPS_PACRK_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_SP3 field. #define BR_AIPS_PACRK_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRK_SP3. #define BF_AIPS_PACRK_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP3), uint32_t) & BM_AIPS_PACRK_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRK_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRK_TP2 (20U) //!< Bit position for AIPS_PACRK_TP2. #define BM_AIPS_PACRK_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRK_TP2. #define BS_AIPS_PACRK_TP2 (1U) //!< Bit field size in bits for AIPS_PACRK_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_TP2 field. #define BR_AIPS_PACRK_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRK_TP2. #define BF_AIPS_PACRK_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP2), uint32_t) & BM_AIPS_PACRK_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRK_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRK_WP2 (21U) //!< Bit position for AIPS_PACRK_WP2. #define BM_AIPS_PACRK_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRK_WP2. #define BS_AIPS_PACRK_WP2 (1U) //!< Bit field size in bits for AIPS_PACRK_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_WP2 field. #define BR_AIPS_PACRK_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRK_WP2. #define BF_AIPS_PACRK_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP2), uint32_t) & BM_AIPS_PACRK_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRK_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRK_SP2 (22U) //!< Bit position for AIPS_PACRK_SP2. #define BM_AIPS_PACRK_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRK_SP2. #define BS_AIPS_PACRK_SP2 (1U) //!< Bit field size in bits for AIPS_PACRK_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_SP2 field. #define BR_AIPS_PACRK_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRK_SP2. #define BF_AIPS_PACRK_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP2), uint32_t) & BM_AIPS_PACRK_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRK_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRK_TP1 (24U) //!< Bit position for AIPS_PACRK_TP1. #define BM_AIPS_PACRK_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRK_TP1. #define BS_AIPS_PACRK_TP1 (1U) //!< Bit field size in bits for AIPS_PACRK_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_TP1 field. #define BR_AIPS_PACRK_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRK_TP1. #define BF_AIPS_PACRK_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP1), uint32_t) & BM_AIPS_PACRK_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRK_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRK_WP1 (25U) //!< Bit position for AIPS_PACRK_WP1. #define BM_AIPS_PACRK_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRK_WP1. #define BS_AIPS_PACRK_WP1 (1U) //!< Bit field size in bits for AIPS_PACRK_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_WP1 field. #define BR_AIPS_PACRK_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRK_WP1. #define BF_AIPS_PACRK_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP1), uint32_t) & BM_AIPS_PACRK_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRK_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRK_SP1 (26U) //!< Bit position for AIPS_PACRK_SP1. #define BM_AIPS_PACRK_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRK_SP1. #define BS_AIPS_PACRK_SP1 (1U) //!< Bit field size in bits for AIPS_PACRK_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_SP1 field. #define BR_AIPS_PACRK_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRK_SP1. #define BF_AIPS_PACRK_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP1), uint32_t) & BM_AIPS_PACRK_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRK_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRK_TP0 (28U) //!< Bit position for AIPS_PACRK_TP0. #define BM_AIPS_PACRK_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRK_TP0. #define BS_AIPS_PACRK_TP0 (1U) //!< Bit field size in bits for AIPS_PACRK_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_TP0 field. #define BR_AIPS_PACRK_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRK_TP0. #define BF_AIPS_PACRK_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP0), uint32_t) & BM_AIPS_PACRK_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRK_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRK_WP0 (29U) //!< Bit position for AIPS_PACRK_WP0. #define BM_AIPS_PACRK_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRK_WP0. #define BS_AIPS_PACRK_WP0 (1U) //!< Bit field size in bits for AIPS_PACRK_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_WP0 field. #define BR_AIPS_PACRK_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRK_WP0. #define BF_AIPS_PACRK_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP0), uint32_t) & BM_AIPS_PACRK_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRK_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRK, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRK_SP0 (30U) //!< Bit position for AIPS_PACRK_SP0. #define BM_AIPS_PACRK_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRK_SP0. #define BS_AIPS_PACRK_SP0 (1U) //!< Bit field size in bits for AIPS_PACRK_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRK_SP0 field. #define BR_AIPS_PACRK_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRK_SP0. #define BF_AIPS_PACRK_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP0), uint32_t) & BM_AIPS_PACRK_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRK_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRL - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRL - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacrl { uint32_t U; struct _hw_aips_pacrl_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrl_t; #endif /*! * @name Constants and macros for entire AIPS_PACRL register */ //@{ #define HW_AIPS_PACRL_ADDR(x) (REGS_AIPS_BASE(x) + 0x5CU) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRL(x) (*(__IO hw_aips_pacrl_t *) HW_AIPS_PACRL_ADDR(x)) #define HW_AIPS_PACRL_RD(x) (HW_AIPS_PACRL(x).U) #define HW_AIPS_PACRL_WR(x, v) (HW_AIPS_PACRL(x).U = (v)) #define HW_AIPS_PACRL_SET(x, v) (HW_AIPS_PACRL_WR(x, HW_AIPS_PACRL_RD(x) | (v))) #define HW_AIPS_PACRL_CLR(x, v) (HW_AIPS_PACRL_WR(x, HW_AIPS_PACRL_RD(x) & ~(v))) #define HW_AIPS_PACRL_TOG(x, v) (HW_AIPS_PACRL_WR(x, HW_AIPS_PACRL_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRL bitfields */ /*! * @name Register AIPS_PACRL, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRL_TP7 (0U) //!< Bit position for AIPS_PACRL_TP7. #define BM_AIPS_PACRL_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRL_TP7. #define BS_AIPS_PACRL_TP7 (1U) //!< Bit field size in bits for AIPS_PACRL_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_TP7 field. #define BR_AIPS_PACRL_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRL_TP7. #define BF_AIPS_PACRL_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP7), uint32_t) & BM_AIPS_PACRL_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRL_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRL_WP7 (1U) //!< Bit position for AIPS_PACRL_WP7. #define BM_AIPS_PACRL_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRL_WP7. #define BS_AIPS_PACRL_WP7 (1U) //!< Bit field size in bits for AIPS_PACRL_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_WP7 field. #define BR_AIPS_PACRL_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRL_WP7. #define BF_AIPS_PACRL_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP7), uint32_t) & BM_AIPS_PACRL_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRL_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRL_SP7 (2U) //!< Bit position for AIPS_PACRL_SP7. #define BM_AIPS_PACRL_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRL_SP7. #define BS_AIPS_PACRL_SP7 (1U) //!< Bit field size in bits for AIPS_PACRL_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_SP7 field. #define BR_AIPS_PACRL_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRL_SP7. #define BF_AIPS_PACRL_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP7), uint32_t) & BM_AIPS_PACRL_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRL_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRL_TP6 (4U) //!< Bit position for AIPS_PACRL_TP6. #define BM_AIPS_PACRL_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRL_TP6. #define BS_AIPS_PACRL_TP6 (1U) //!< Bit field size in bits for AIPS_PACRL_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_TP6 field. #define BR_AIPS_PACRL_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRL_TP6. #define BF_AIPS_PACRL_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP6), uint32_t) & BM_AIPS_PACRL_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRL_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRL_WP6 (5U) //!< Bit position for AIPS_PACRL_WP6. #define BM_AIPS_PACRL_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRL_WP6. #define BS_AIPS_PACRL_WP6 (1U) //!< Bit field size in bits for AIPS_PACRL_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_WP6 field. #define BR_AIPS_PACRL_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRL_WP6. #define BF_AIPS_PACRL_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP6), uint32_t) & BM_AIPS_PACRL_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRL_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRL_SP6 (6U) //!< Bit position for AIPS_PACRL_SP6. #define BM_AIPS_PACRL_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRL_SP6. #define BS_AIPS_PACRL_SP6 (1U) //!< Bit field size in bits for AIPS_PACRL_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_SP6 field. #define BR_AIPS_PACRL_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRL_SP6. #define BF_AIPS_PACRL_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP6), uint32_t) & BM_AIPS_PACRL_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRL_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRL_TP5 (8U) //!< Bit position for AIPS_PACRL_TP5. #define BM_AIPS_PACRL_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRL_TP5. #define BS_AIPS_PACRL_TP5 (1U) //!< Bit field size in bits for AIPS_PACRL_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_TP5 field. #define BR_AIPS_PACRL_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRL_TP5. #define BF_AIPS_PACRL_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP5), uint32_t) & BM_AIPS_PACRL_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRL_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRL_WP5 (9U) //!< Bit position for AIPS_PACRL_WP5. #define BM_AIPS_PACRL_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRL_WP5. #define BS_AIPS_PACRL_WP5 (1U) //!< Bit field size in bits for AIPS_PACRL_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_WP5 field. #define BR_AIPS_PACRL_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRL_WP5. #define BF_AIPS_PACRL_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP5), uint32_t) & BM_AIPS_PACRL_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRL_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRL_SP5 (10U) //!< Bit position for AIPS_PACRL_SP5. #define BM_AIPS_PACRL_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRL_SP5. #define BS_AIPS_PACRL_SP5 (1U) //!< Bit field size in bits for AIPS_PACRL_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_SP5 field. #define BR_AIPS_PACRL_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRL_SP5. #define BF_AIPS_PACRL_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP5), uint32_t) & BM_AIPS_PACRL_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRL_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRL_TP4 (12U) //!< Bit position for AIPS_PACRL_TP4. #define BM_AIPS_PACRL_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRL_TP4. #define BS_AIPS_PACRL_TP4 (1U) //!< Bit field size in bits for AIPS_PACRL_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_TP4 field. #define BR_AIPS_PACRL_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRL_TP4. #define BF_AIPS_PACRL_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP4), uint32_t) & BM_AIPS_PACRL_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRL_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRL_WP4 (13U) //!< Bit position for AIPS_PACRL_WP4. #define BM_AIPS_PACRL_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRL_WP4. #define BS_AIPS_PACRL_WP4 (1U) //!< Bit field size in bits for AIPS_PACRL_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_WP4 field. #define BR_AIPS_PACRL_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRL_WP4. #define BF_AIPS_PACRL_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP4), uint32_t) & BM_AIPS_PACRL_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRL_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRL_SP4 (14U) //!< Bit position for AIPS_PACRL_SP4. #define BM_AIPS_PACRL_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRL_SP4. #define BS_AIPS_PACRL_SP4 (1U) //!< Bit field size in bits for AIPS_PACRL_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_SP4 field. #define BR_AIPS_PACRL_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRL_SP4. #define BF_AIPS_PACRL_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP4), uint32_t) & BM_AIPS_PACRL_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRL_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRL_TP3 (16U) //!< Bit position for AIPS_PACRL_TP3. #define BM_AIPS_PACRL_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRL_TP3. #define BS_AIPS_PACRL_TP3 (1U) //!< Bit field size in bits for AIPS_PACRL_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_TP3 field. #define BR_AIPS_PACRL_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRL_TP3. #define BF_AIPS_PACRL_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP3), uint32_t) & BM_AIPS_PACRL_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRL_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRL_WP3 (17U) //!< Bit position for AIPS_PACRL_WP3. #define BM_AIPS_PACRL_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRL_WP3. #define BS_AIPS_PACRL_WP3 (1U) //!< Bit field size in bits for AIPS_PACRL_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_WP3 field. #define BR_AIPS_PACRL_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRL_WP3. #define BF_AIPS_PACRL_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP3), uint32_t) & BM_AIPS_PACRL_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRL_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRL_SP3 (18U) //!< Bit position for AIPS_PACRL_SP3. #define BM_AIPS_PACRL_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRL_SP3. #define BS_AIPS_PACRL_SP3 (1U) //!< Bit field size in bits for AIPS_PACRL_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_SP3 field. #define BR_AIPS_PACRL_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRL_SP3. #define BF_AIPS_PACRL_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP3), uint32_t) & BM_AIPS_PACRL_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRL_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRL_TP2 (20U) //!< Bit position for AIPS_PACRL_TP2. #define BM_AIPS_PACRL_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRL_TP2. #define BS_AIPS_PACRL_TP2 (1U) //!< Bit field size in bits for AIPS_PACRL_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_TP2 field. #define BR_AIPS_PACRL_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRL_TP2. #define BF_AIPS_PACRL_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP2), uint32_t) & BM_AIPS_PACRL_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRL_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRL_WP2 (21U) //!< Bit position for AIPS_PACRL_WP2. #define BM_AIPS_PACRL_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRL_WP2. #define BS_AIPS_PACRL_WP2 (1U) //!< Bit field size in bits for AIPS_PACRL_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_WP2 field. #define BR_AIPS_PACRL_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRL_WP2. #define BF_AIPS_PACRL_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP2), uint32_t) & BM_AIPS_PACRL_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRL_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRL_SP2 (22U) //!< Bit position for AIPS_PACRL_SP2. #define BM_AIPS_PACRL_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRL_SP2. #define BS_AIPS_PACRL_SP2 (1U) //!< Bit field size in bits for AIPS_PACRL_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_SP2 field. #define BR_AIPS_PACRL_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRL_SP2. #define BF_AIPS_PACRL_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP2), uint32_t) & BM_AIPS_PACRL_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRL_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRL_TP1 (24U) //!< Bit position for AIPS_PACRL_TP1. #define BM_AIPS_PACRL_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRL_TP1. #define BS_AIPS_PACRL_TP1 (1U) //!< Bit field size in bits for AIPS_PACRL_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_TP1 field. #define BR_AIPS_PACRL_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRL_TP1. #define BF_AIPS_PACRL_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP1), uint32_t) & BM_AIPS_PACRL_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRL_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRL_WP1 (25U) //!< Bit position for AIPS_PACRL_WP1. #define BM_AIPS_PACRL_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRL_WP1. #define BS_AIPS_PACRL_WP1 (1U) //!< Bit field size in bits for AIPS_PACRL_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_WP1 field. #define BR_AIPS_PACRL_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRL_WP1. #define BF_AIPS_PACRL_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP1), uint32_t) & BM_AIPS_PACRL_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRL_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRL_SP1 (26U) //!< Bit position for AIPS_PACRL_SP1. #define BM_AIPS_PACRL_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRL_SP1. #define BS_AIPS_PACRL_SP1 (1U) //!< Bit field size in bits for AIPS_PACRL_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_SP1 field. #define BR_AIPS_PACRL_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRL_SP1. #define BF_AIPS_PACRL_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP1), uint32_t) & BM_AIPS_PACRL_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRL_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRL_TP0 (28U) //!< Bit position for AIPS_PACRL_TP0. #define BM_AIPS_PACRL_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRL_TP0. #define BS_AIPS_PACRL_TP0 (1U) //!< Bit field size in bits for AIPS_PACRL_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_TP0 field. #define BR_AIPS_PACRL_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRL_TP0. #define BF_AIPS_PACRL_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP0), uint32_t) & BM_AIPS_PACRL_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRL_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRL_WP0 (29U) //!< Bit position for AIPS_PACRL_WP0. #define BM_AIPS_PACRL_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRL_WP0. #define BS_AIPS_PACRL_WP0 (1U) //!< Bit field size in bits for AIPS_PACRL_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_WP0 field. #define BR_AIPS_PACRL_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRL_WP0. #define BF_AIPS_PACRL_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP0), uint32_t) & BM_AIPS_PACRL_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRL_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRL, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRL_SP0 (30U) //!< Bit position for AIPS_PACRL_SP0. #define BM_AIPS_PACRL_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRL_SP0. #define BS_AIPS_PACRL_SP0 (1U) //!< Bit field size in bits for AIPS_PACRL_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRL_SP0 field. #define BR_AIPS_PACRL_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRL_SP0. #define BF_AIPS_PACRL_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP0), uint32_t) & BM_AIPS_PACRL_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRL_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRM - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRM - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacrm { uint32_t U; struct _hw_aips_pacrm_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrm_t; #endif /*! * @name Constants and macros for entire AIPS_PACRM register */ //@{ #define HW_AIPS_PACRM_ADDR(x) (REGS_AIPS_BASE(x) + 0x60U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRM(x) (*(__IO hw_aips_pacrm_t *) HW_AIPS_PACRM_ADDR(x)) #define HW_AIPS_PACRM_RD(x) (HW_AIPS_PACRM(x).U) #define HW_AIPS_PACRM_WR(x, v) (HW_AIPS_PACRM(x).U = (v)) #define HW_AIPS_PACRM_SET(x, v) (HW_AIPS_PACRM_WR(x, HW_AIPS_PACRM_RD(x) | (v))) #define HW_AIPS_PACRM_CLR(x, v) (HW_AIPS_PACRM_WR(x, HW_AIPS_PACRM_RD(x) & ~(v))) #define HW_AIPS_PACRM_TOG(x, v) (HW_AIPS_PACRM_WR(x, HW_AIPS_PACRM_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRM bitfields */ /*! * @name Register AIPS_PACRM, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRM_TP7 (0U) //!< Bit position for AIPS_PACRM_TP7. #define BM_AIPS_PACRM_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRM_TP7. #define BS_AIPS_PACRM_TP7 (1U) //!< Bit field size in bits for AIPS_PACRM_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_TP7 field. #define BR_AIPS_PACRM_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRM_TP7. #define BF_AIPS_PACRM_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP7), uint32_t) & BM_AIPS_PACRM_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRM_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRM_WP7 (1U) //!< Bit position for AIPS_PACRM_WP7. #define BM_AIPS_PACRM_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRM_WP7. #define BS_AIPS_PACRM_WP7 (1U) //!< Bit field size in bits for AIPS_PACRM_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_WP7 field. #define BR_AIPS_PACRM_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRM_WP7. #define BF_AIPS_PACRM_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP7), uint32_t) & BM_AIPS_PACRM_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRM_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRM_SP7 (2U) //!< Bit position for AIPS_PACRM_SP7. #define BM_AIPS_PACRM_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRM_SP7. #define BS_AIPS_PACRM_SP7 (1U) //!< Bit field size in bits for AIPS_PACRM_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_SP7 field. #define BR_AIPS_PACRM_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRM_SP7. #define BF_AIPS_PACRM_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP7), uint32_t) & BM_AIPS_PACRM_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRM_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRM_TP6 (4U) //!< Bit position for AIPS_PACRM_TP6. #define BM_AIPS_PACRM_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRM_TP6. #define BS_AIPS_PACRM_TP6 (1U) //!< Bit field size in bits for AIPS_PACRM_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_TP6 field. #define BR_AIPS_PACRM_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRM_TP6. #define BF_AIPS_PACRM_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP6), uint32_t) & BM_AIPS_PACRM_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRM_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRM_WP6 (5U) //!< Bit position for AIPS_PACRM_WP6. #define BM_AIPS_PACRM_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRM_WP6. #define BS_AIPS_PACRM_WP6 (1U) //!< Bit field size in bits for AIPS_PACRM_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_WP6 field. #define BR_AIPS_PACRM_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRM_WP6. #define BF_AIPS_PACRM_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP6), uint32_t) & BM_AIPS_PACRM_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRM_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRM_SP6 (6U) //!< Bit position for AIPS_PACRM_SP6. #define BM_AIPS_PACRM_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRM_SP6. #define BS_AIPS_PACRM_SP6 (1U) //!< Bit field size in bits for AIPS_PACRM_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_SP6 field. #define BR_AIPS_PACRM_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRM_SP6. #define BF_AIPS_PACRM_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP6), uint32_t) & BM_AIPS_PACRM_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRM_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRM_TP5 (8U) //!< Bit position for AIPS_PACRM_TP5. #define BM_AIPS_PACRM_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRM_TP5. #define BS_AIPS_PACRM_TP5 (1U) //!< Bit field size in bits for AIPS_PACRM_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_TP5 field. #define BR_AIPS_PACRM_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRM_TP5. #define BF_AIPS_PACRM_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP5), uint32_t) & BM_AIPS_PACRM_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRM_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRM_WP5 (9U) //!< Bit position for AIPS_PACRM_WP5. #define BM_AIPS_PACRM_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRM_WP5. #define BS_AIPS_PACRM_WP5 (1U) //!< Bit field size in bits for AIPS_PACRM_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_WP5 field. #define BR_AIPS_PACRM_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRM_WP5. #define BF_AIPS_PACRM_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP5), uint32_t) & BM_AIPS_PACRM_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRM_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRM_SP5 (10U) //!< Bit position for AIPS_PACRM_SP5. #define BM_AIPS_PACRM_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRM_SP5. #define BS_AIPS_PACRM_SP5 (1U) //!< Bit field size in bits for AIPS_PACRM_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_SP5 field. #define BR_AIPS_PACRM_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRM_SP5. #define BF_AIPS_PACRM_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP5), uint32_t) & BM_AIPS_PACRM_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRM_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRM_TP4 (12U) //!< Bit position for AIPS_PACRM_TP4. #define BM_AIPS_PACRM_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRM_TP4. #define BS_AIPS_PACRM_TP4 (1U) //!< Bit field size in bits for AIPS_PACRM_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_TP4 field. #define BR_AIPS_PACRM_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRM_TP4. #define BF_AIPS_PACRM_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP4), uint32_t) & BM_AIPS_PACRM_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRM_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRM_WP4 (13U) //!< Bit position for AIPS_PACRM_WP4. #define BM_AIPS_PACRM_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRM_WP4. #define BS_AIPS_PACRM_WP4 (1U) //!< Bit field size in bits for AIPS_PACRM_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_WP4 field. #define BR_AIPS_PACRM_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRM_WP4. #define BF_AIPS_PACRM_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP4), uint32_t) & BM_AIPS_PACRM_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRM_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRM_SP4 (14U) //!< Bit position for AIPS_PACRM_SP4. #define BM_AIPS_PACRM_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRM_SP4. #define BS_AIPS_PACRM_SP4 (1U) //!< Bit field size in bits for AIPS_PACRM_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_SP4 field. #define BR_AIPS_PACRM_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRM_SP4. #define BF_AIPS_PACRM_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP4), uint32_t) & BM_AIPS_PACRM_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRM_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRM_TP3 (16U) //!< Bit position for AIPS_PACRM_TP3. #define BM_AIPS_PACRM_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRM_TP3. #define BS_AIPS_PACRM_TP3 (1U) //!< Bit field size in bits for AIPS_PACRM_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_TP3 field. #define BR_AIPS_PACRM_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRM_TP3. #define BF_AIPS_PACRM_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP3), uint32_t) & BM_AIPS_PACRM_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRM_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRM_WP3 (17U) //!< Bit position for AIPS_PACRM_WP3. #define BM_AIPS_PACRM_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRM_WP3. #define BS_AIPS_PACRM_WP3 (1U) //!< Bit field size in bits for AIPS_PACRM_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_WP3 field. #define BR_AIPS_PACRM_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRM_WP3. #define BF_AIPS_PACRM_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP3), uint32_t) & BM_AIPS_PACRM_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRM_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRM_SP3 (18U) //!< Bit position for AIPS_PACRM_SP3. #define BM_AIPS_PACRM_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRM_SP3. #define BS_AIPS_PACRM_SP3 (1U) //!< Bit field size in bits for AIPS_PACRM_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_SP3 field. #define BR_AIPS_PACRM_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRM_SP3. #define BF_AIPS_PACRM_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP3), uint32_t) & BM_AIPS_PACRM_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRM_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRM_TP2 (20U) //!< Bit position for AIPS_PACRM_TP2. #define BM_AIPS_PACRM_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRM_TP2. #define BS_AIPS_PACRM_TP2 (1U) //!< Bit field size in bits for AIPS_PACRM_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_TP2 field. #define BR_AIPS_PACRM_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRM_TP2. #define BF_AIPS_PACRM_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP2), uint32_t) & BM_AIPS_PACRM_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRM_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRM_WP2 (21U) //!< Bit position for AIPS_PACRM_WP2. #define BM_AIPS_PACRM_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRM_WP2. #define BS_AIPS_PACRM_WP2 (1U) //!< Bit field size in bits for AIPS_PACRM_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_WP2 field. #define BR_AIPS_PACRM_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRM_WP2. #define BF_AIPS_PACRM_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP2), uint32_t) & BM_AIPS_PACRM_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRM_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRM_SP2 (22U) //!< Bit position for AIPS_PACRM_SP2. #define BM_AIPS_PACRM_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRM_SP2. #define BS_AIPS_PACRM_SP2 (1U) //!< Bit field size in bits for AIPS_PACRM_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_SP2 field. #define BR_AIPS_PACRM_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRM_SP2. #define BF_AIPS_PACRM_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP2), uint32_t) & BM_AIPS_PACRM_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRM_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRM_TP1 (24U) //!< Bit position for AIPS_PACRM_TP1. #define BM_AIPS_PACRM_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRM_TP1. #define BS_AIPS_PACRM_TP1 (1U) //!< Bit field size in bits for AIPS_PACRM_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_TP1 field. #define BR_AIPS_PACRM_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRM_TP1. #define BF_AIPS_PACRM_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP1), uint32_t) & BM_AIPS_PACRM_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRM_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRM_WP1 (25U) //!< Bit position for AIPS_PACRM_WP1. #define BM_AIPS_PACRM_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRM_WP1. #define BS_AIPS_PACRM_WP1 (1U) //!< Bit field size in bits for AIPS_PACRM_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_WP1 field. #define BR_AIPS_PACRM_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRM_WP1. #define BF_AIPS_PACRM_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP1), uint32_t) & BM_AIPS_PACRM_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRM_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRM_SP1 (26U) //!< Bit position for AIPS_PACRM_SP1. #define BM_AIPS_PACRM_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRM_SP1. #define BS_AIPS_PACRM_SP1 (1U) //!< Bit field size in bits for AIPS_PACRM_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_SP1 field. #define BR_AIPS_PACRM_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRM_SP1. #define BF_AIPS_PACRM_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP1), uint32_t) & BM_AIPS_PACRM_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRM_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRM_TP0 (28U) //!< Bit position for AIPS_PACRM_TP0. #define BM_AIPS_PACRM_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRM_TP0. #define BS_AIPS_PACRM_TP0 (1U) //!< Bit field size in bits for AIPS_PACRM_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_TP0 field. #define BR_AIPS_PACRM_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRM_TP0. #define BF_AIPS_PACRM_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP0), uint32_t) & BM_AIPS_PACRM_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRM_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRM_WP0 (29U) //!< Bit position for AIPS_PACRM_WP0. #define BM_AIPS_PACRM_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRM_WP0. #define BS_AIPS_PACRM_WP0 (1U) //!< Bit field size in bits for AIPS_PACRM_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_WP0 field. #define BR_AIPS_PACRM_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRM_WP0. #define BF_AIPS_PACRM_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP0), uint32_t) & BM_AIPS_PACRM_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRM_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRM, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRM_SP0 (30U) //!< Bit position for AIPS_PACRM_SP0. #define BM_AIPS_PACRM_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRM_SP0. #define BS_AIPS_PACRM_SP0 (1U) //!< Bit field size in bits for AIPS_PACRM_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRM_SP0 field. #define BR_AIPS_PACRM_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRM_SP0. #define BF_AIPS_PACRM_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP0), uint32_t) & BM_AIPS_PACRM_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRM_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRN - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRN - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacrn { uint32_t U; struct _hw_aips_pacrn_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrn_t; #endif /*! * @name Constants and macros for entire AIPS_PACRN register */ //@{ #define HW_AIPS_PACRN_ADDR(x) (REGS_AIPS_BASE(x) + 0x64U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRN(x) (*(__IO hw_aips_pacrn_t *) HW_AIPS_PACRN_ADDR(x)) #define HW_AIPS_PACRN_RD(x) (HW_AIPS_PACRN(x).U) #define HW_AIPS_PACRN_WR(x, v) (HW_AIPS_PACRN(x).U = (v)) #define HW_AIPS_PACRN_SET(x, v) (HW_AIPS_PACRN_WR(x, HW_AIPS_PACRN_RD(x) | (v))) #define HW_AIPS_PACRN_CLR(x, v) (HW_AIPS_PACRN_WR(x, HW_AIPS_PACRN_RD(x) & ~(v))) #define HW_AIPS_PACRN_TOG(x, v) (HW_AIPS_PACRN_WR(x, HW_AIPS_PACRN_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRN bitfields */ /*! * @name Register AIPS_PACRN, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRN_TP7 (0U) //!< Bit position for AIPS_PACRN_TP7. #define BM_AIPS_PACRN_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRN_TP7. #define BS_AIPS_PACRN_TP7 (1U) //!< Bit field size in bits for AIPS_PACRN_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_TP7 field. #define BR_AIPS_PACRN_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRN_TP7. #define BF_AIPS_PACRN_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP7), uint32_t) & BM_AIPS_PACRN_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRN_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRN_WP7 (1U) //!< Bit position for AIPS_PACRN_WP7. #define BM_AIPS_PACRN_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRN_WP7. #define BS_AIPS_PACRN_WP7 (1U) //!< Bit field size in bits for AIPS_PACRN_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_WP7 field. #define BR_AIPS_PACRN_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRN_WP7. #define BF_AIPS_PACRN_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP7), uint32_t) & BM_AIPS_PACRN_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRN_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRN_SP7 (2U) //!< Bit position for AIPS_PACRN_SP7. #define BM_AIPS_PACRN_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRN_SP7. #define BS_AIPS_PACRN_SP7 (1U) //!< Bit field size in bits for AIPS_PACRN_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_SP7 field. #define BR_AIPS_PACRN_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRN_SP7. #define BF_AIPS_PACRN_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP7), uint32_t) & BM_AIPS_PACRN_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRN_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRN_TP6 (4U) //!< Bit position for AIPS_PACRN_TP6. #define BM_AIPS_PACRN_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRN_TP6. #define BS_AIPS_PACRN_TP6 (1U) //!< Bit field size in bits for AIPS_PACRN_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_TP6 field. #define BR_AIPS_PACRN_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRN_TP6. #define BF_AIPS_PACRN_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP6), uint32_t) & BM_AIPS_PACRN_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRN_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRN_WP6 (5U) //!< Bit position for AIPS_PACRN_WP6. #define BM_AIPS_PACRN_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRN_WP6. #define BS_AIPS_PACRN_WP6 (1U) //!< Bit field size in bits for AIPS_PACRN_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_WP6 field. #define BR_AIPS_PACRN_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRN_WP6. #define BF_AIPS_PACRN_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP6), uint32_t) & BM_AIPS_PACRN_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRN_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRN_SP6 (6U) //!< Bit position for AIPS_PACRN_SP6. #define BM_AIPS_PACRN_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRN_SP6. #define BS_AIPS_PACRN_SP6 (1U) //!< Bit field size in bits for AIPS_PACRN_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_SP6 field. #define BR_AIPS_PACRN_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRN_SP6. #define BF_AIPS_PACRN_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP6), uint32_t) & BM_AIPS_PACRN_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRN_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRN_TP5 (8U) //!< Bit position for AIPS_PACRN_TP5. #define BM_AIPS_PACRN_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRN_TP5. #define BS_AIPS_PACRN_TP5 (1U) //!< Bit field size in bits for AIPS_PACRN_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_TP5 field. #define BR_AIPS_PACRN_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRN_TP5. #define BF_AIPS_PACRN_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP5), uint32_t) & BM_AIPS_PACRN_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRN_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRN_WP5 (9U) //!< Bit position for AIPS_PACRN_WP5. #define BM_AIPS_PACRN_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRN_WP5. #define BS_AIPS_PACRN_WP5 (1U) //!< Bit field size in bits for AIPS_PACRN_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_WP5 field. #define BR_AIPS_PACRN_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRN_WP5. #define BF_AIPS_PACRN_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP5), uint32_t) & BM_AIPS_PACRN_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRN_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRN_SP5 (10U) //!< Bit position for AIPS_PACRN_SP5. #define BM_AIPS_PACRN_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRN_SP5. #define BS_AIPS_PACRN_SP5 (1U) //!< Bit field size in bits for AIPS_PACRN_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_SP5 field. #define BR_AIPS_PACRN_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRN_SP5. #define BF_AIPS_PACRN_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP5), uint32_t) & BM_AIPS_PACRN_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRN_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRN_TP4 (12U) //!< Bit position for AIPS_PACRN_TP4. #define BM_AIPS_PACRN_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRN_TP4. #define BS_AIPS_PACRN_TP4 (1U) //!< Bit field size in bits for AIPS_PACRN_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_TP4 field. #define BR_AIPS_PACRN_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRN_TP4. #define BF_AIPS_PACRN_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP4), uint32_t) & BM_AIPS_PACRN_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRN_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRN_WP4 (13U) //!< Bit position for AIPS_PACRN_WP4. #define BM_AIPS_PACRN_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRN_WP4. #define BS_AIPS_PACRN_WP4 (1U) //!< Bit field size in bits for AIPS_PACRN_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_WP4 field. #define BR_AIPS_PACRN_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRN_WP4. #define BF_AIPS_PACRN_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP4), uint32_t) & BM_AIPS_PACRN_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRN_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRN_SP4 (14U) //!< Bit position for AIPS_PACRN_SP4. #define BM_AIPS_PACRN_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRN_SP4. #define BS_AIPS_PACRN_SP4 (1U) //!< Bit field size in bits for AIPS_PACRN_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_SP4 field. #define BR_AIPS_PACRN_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRN_SP4. #define BF_AIPS_PACRN_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP4), uint32_t) & BM_AIPS_PACRN_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRN_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRN_TP3 (16U) //!< Bit position for AIPS_PACRN_TP3. #define BM_AIPS_PACRN_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRN_TP3. #define BS_AIPS_PACRN_TP3 (1U) //!< Bit field size in bits for AIPS_PACRN_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_TP3 field. #define BR_AIPS_PACRN_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRN_TP3. #define BF_AIPS_PACRN_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP3), uint32_t) & BM_AIPS_PACRN_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRN_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRN_WP3 (17U) //!< Bit position for AIPS_PACRN_WP3. #define BM_AIPS_PACRN_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRN_WP3. #define BS_AIPS_PACRN_WP3 (1U) //!< Bit field size in bits for AIPS_PACRN_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_WP3 field. #define BR_AIPS_PACRN_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRN_WP3. #define BF_AIPS_PACRN_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP3), uint32_t) & BM_AIPS_PACRN_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRN_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRN_SP3 (18U) //!< Bit position for AIPS_PACRN_SP3. #define BM_AIPS_PACRN_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRN_SP3. #define BS_AIPS_PACRN_SP3 (1U) //!< Bit field size in bits for AIPS_PACRN_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_SP3 field. #define BR_AIPS_PACRN_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRN_SP3. #define BF_AIPS_PACRN_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP3), uint32_t) & BM_AIPS_PACRN_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRN_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRN_TP2 (20U) //!< Bit position for AIPS_PACRN_TP2. #define BM_AIPS_PACRN_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRN_TP2. #define BS_AIPS_PACRN_TP2 (1U) //!< Bit field size in bits for AIPS_PACRN_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_TP2 field. #define BR_AIPS_PACRN_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRN_TP2. #define BF_AIPS_PACRN_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP2), uint32_t) & BM_AIPS_PACRN_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRN_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRN_WP2 (21U) //!< Bit position for AIPS_PACRN_WP2. #define BM_AIPS_PACRN_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRN_WP2. #define BS_AIPS_PACRN_WP2 (1U) //!< Bit field size in bits for AIPS_PACRN_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_WP2 field. #define BR_AIPS_PACRN_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRN_WP2. #define BF_AIPS_PACRN_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP2), uint32_t) & BM_AIPS_PACRN_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRN_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRN_SP2 (22U) //!< Bit position for AIPS_PACRN_SP2. #define BM_AIPS_PACRN_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRN_SP2. #define BS_AIPS_PACRN_SP2 (1U) //!< Bit field size in bits for AIPS_PACRN_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_SP2 field. #define BR_AIPS_PACRN_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRN_SP2. #define BF_AIPS_PACRN_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP2), uint32_t) & BM_AIPS_PACRN_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRN_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRN_TP1 (24U) //!< Bit position for AIPS_PACRN_TP1. #define BM_AIPS_PACRN_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRN_TP1. #define BS_AIPS_PACRN_TP1 (1U) //!< Bit field size in bits for AIPS_PACRN_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_TP1 field. #define BR_AIPS_PACRN_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRN_TP1. #define BF_AIPS_PACRN_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP1), uint32_t) & BM_AIPS_PACRN_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRN_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRN_WP1 (25U) //!< Bit position for AIPS_PACRN_WP1. #define BM_AIPS_PACRN_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRN_WP1. #define BS_AIPS_PACRN_WP1 (1U) //!< Bit field size in bits for AIPS_PACRN_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_WP1 field. #define BR_AIPS_PACRN_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRN_WP1. #define BF_AIPS_PACRN_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP1), uint32_t) & BM_AIPS_PACRN_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRN_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRN_SP1 (26U) //!< Bit position for AIPS_PACRN_SP1. #define BM_AIPS_PACRN_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRN_SP1. #define BS_AIPS_PACRN_SP1 (1U) //!< Bit field size in bits for AIPS_PACRN_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_SP1 field. #define BR_AIPS_PACRN_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRN_SP1. #define BF_AIPS_PACRN_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP1), uint32_t) & BM_AIPS_PACRN_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRN_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRN_TP0 (28U) //!< Bit position for AIPS_PACRN_TP0. #define BM_AIPS_PACRN_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRN_TP0. #define BS_AIPS_PACRN_TP0 (1U) //!< Bit field size in bits for AIPS_PACRN_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_TP0 field. #define BR_AIPS_PACRN_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRN_TP0. #define BF_AIPS_PACRN_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP0), uint32_t) & BM_AIPS_PACRN_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRN_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRN_WP0 (29U) //!< Bit position for AIPS_PACRN_WP0. #define BM_AIPS_PACRN_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRN_WP0. #define BS_AIPS_PACRN_WP0 (1U) //!< Bit field size in bits for AIPS_PACRN_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_WP0 field. #define BR_AIPS_PACRN_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRN_WP0. #define BF_AIPS_PACRN_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP0), uint32_t) & BM_AIPS_PACRN_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRN_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRN, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRN_SP0 (30U) //!< Bit position for AIPS_PACRN_SP0. #define BM_AIPS_PACRN_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRN_SP0. #define BS_AIPS_PACRN_SP0 (1U) //!< Bit field size in bits for AIPS_PACRN_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRN_SP0 field. #define BR_AIPS_PACRN_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRN_SP0. #define BF_AIPS_PACRN_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP0), uint32_t) & BM_AIPS_PACRN_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRN_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRO - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRO - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacro { uint32_t U; struct _hw_aips_pacro_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacro_t; #endif /*! * @name Constants and macros for entire AIPS_PACRO register */ //@{ #define HW_AIPS_PACRO_ADDR(x) (REGS_AIPS_BASE(x) + 0x68U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRO(x) (*(__IO hw_aips_pacro_t *) HW_AIPS_PACRO_ADDR(x)) #define HW_AIPS_PACRO_RD(x) (HW_AIPS_PACRO(x).U) #define HW_AIPS_PACRO_WR(x, v) (HW_AIPS_PACRO(x).U = (v)) #define HW_AIPS_PACRO_SET(x, v) (HW_AIPS_PACRO_WR(x, HW_AIPS_PACRO_RD(x) | (v))) #define HW_AIPS_PACRO_CLR(x, v) (HW_AIPS_PACRO_WR(x, HW_AIPS_PACRO_RD(x) & ~(v))) #define HW_AIPS_PACRO_TOG(x, v) (HW_AIPS_PACRO_WR(x, HW_AIPS_PACRO_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRO bitfields */ /*! * @name Register AIPS_PACRO, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRO_TP7 (0U) //!< Bit position for AIPS_PACRO_TP7. #define BM_AIPS_PACRO_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRO_TP7. #define BS_AIPS_PACRO_TP7 (1U) //!< Bit field size in bits for AIPS_PACRO_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_TP7 field. #define BR_AIPS_PACRO_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRO_TP7. #define BF_AIPS_PACRO_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP7), uint32_t) & BM_AIPS_PACRO_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRO_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRO_WP7 (1U) //!< Bit position for AIPS_PACRO_WP7. #define BM_AIPS_PACRO_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRO_WP7. #define BS_AIPS_PACRO_WP7 (1U) //!< Bit field size in bits for AIPS_PACRO_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_WP7 field. #define BR_AIPS_PACRO_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRO_WP7. #define BF_AIPS_PACRO_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP7), uint32_t) & BM_AIPS_PACRO_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRO_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRO_SP7 (2U) //!< Bit position for AIPS_PACRO_SP7. #define BM_AIPS_PACRO_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRO_SP7. #define BS_AIPS_PACRO_SP7 (1U) //!< Bit field size in bits for AIPS_PACRO_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_SP7 field. #define BR_AIPS_PACRO_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRO_SP7. #define BF_AIPS_PACRO_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP7), uint32_t) & BM_AIPS_PACRO_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRO_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRO_TP6 (4U) //!< Bit position for AIPS_PACRO_TP6. #define BM_AIPS_PACRO_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRO_TP6. #define BS_AIPS_PACRO_TP6 (1U) //!< Bit field size in bits for AIPS_PACRO_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_TP6 field. #define BR_AIPS_PACRO_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRO_TP6. #define BF_AIPS_PACRO_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP6), uint32_t) & BM_AIPS_PACRO_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRO_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRO_WP6 (5U) //!< Bit position for AIPS_PACRO_WP6. #define BM_AIPS_PACRO_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRO_WP6. #define BS_AIPS_PACRO_WP6 (1U) //!< Bit field size in bits for AIPS_PACRO_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_WP6 field. #define BR_AIPS_PACRO_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRO_WP6. #define BF_AIPS_PACRO_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP6), uint32_t) & BM_AIPS_PACRO_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRO_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRO_SP6 (6U) //!< Bit position for AIPS_PACRO_SP6. #define BM_AIPS_PACRO_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRO_SP6. #define BS_AIPS_PACRO_SP6 (1U) //!< Bit field size in bits for AIPS_PACRO_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_SP6 field. #define BR_AIPS_PACRO_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRO_SP6. #define BF_AIPS_PACRO_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP6), uint32_t) & BM_AIPS_PACRO_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRO_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRO_TP5 (8U) //!< Bit position for AIPS_PACRO_TP5. #define BM_AIPS_PACRO_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRO_TP5. #define BS_AIPS_PACRO_TP5 (1U) //!< Bit field size in bits for AIPS_PACRO_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_TP5 field. #define BR_AIPS_PACRO_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRO_TP5. #define BF_AIPS_PACRO_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP5), uint32_t) & BM_AIPS_PACRO_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRO_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRO_WP5 (9U) //!< Bit position for AIPS_PACRO_WP5. #define BM_AIPS_PACRO_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRO_WP5. #define BS_AIPS_PACRO_WP5 (1U) //!< Bit field size in bits for AIPS_PACRO_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_WP5 field. #define BR_AIPS_PACRO_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRO_WP5. #define BF_AIPS_PACRO_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP5), uint32_t) & BM_AIPS_PACRO_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRO_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRO_SP5 (10U) //!< Bit position for AIPS_PACRO_SP5. #define BM_AIPS_PACRO_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRO_SP5. #define BS_AIPS_PACRO_SP5 (1U) //!< Bit field size in bits for AIPS_PACRO_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_SP5 field. #define BR_AIPS_PACRO_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRO_SP5. #define BF_AIPS_PACRO_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP5), uint32_t) & BM_AIPS_PACRO_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRO_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRO_TP4 (12U) //!< Bit position for AIPS_PACRO_TP4. #define BM_AIPS_PACRO_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRO_TP4. #define BS_AIPS_PACRO_TP4 (1U) //!< Bit field size in bits for AIPS_PACRO_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_TP4 field. #define BR_AIPS_PACRO_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRO_TP4. #define BF_AIPS_PACRO_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP4), uint32_t) & BM_AIPS_PACRO_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRO_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRO_WP4 (13U) //!< Bit position for AIPS_PACRO_WP4. #define BM_AIPS_PACRO_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRO_WP4. #define BS_AIPS_PACRO_WP4 (1U) //!< Bit field size in bits for AIPS_PACRO_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_WP4 field. #define BR_AIPS_PACRO_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRO_WP4. #define BF_AIPS_PACRO_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP4), uint32_t) & BM_AIPS_PACRO_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRO_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRO_SP4 (14U) //!< Bit position for AIPS_PACRO_SP4. #define BM_AIPS_PACRO_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRO_SP4. #define BS_AIPS_PACRO_SP4 (1U) //!< Bit field size in bits for AIPS_PACRO_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_SP4 field. #define BR_AIPS_PACRO_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRO_SP4. #define BF_AIPS_PACRO_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP4), uint32_t) & BM_AIPS_PACRO_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRO_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRO_TP3 (16U) //!< Bit position for AIPS_PACRO_TP3. #define BM_AIPS_PACRO_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRO_TP3. #define BS_AIPS_PACRO_TP3 (1U) //!< Bit field size in bits for AIPS_PACRO_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_TP3 field. #define BR_AIPS_PACRO_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRO_TP3. #define BF_AIPS_PACRO_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP3), uint32_t) & BM_AIPS_PACRO_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRO_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRO_WP3 (17U) //!< Bit position for AIPS_PACRO_WP3. #define BM_AIPS_PACRO_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRO_WP3. #define BS_AIPS_PACRO_WP3 (1U) //!< Bit field size in bits for AIPS_PACRO_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_WP3 field. #define BR_AIPS_PACRO_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRO_WP3. #define BF_AIPS_PACRO_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP3), uint32_t) & BM_AIPS_PACRO_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRO_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRO_SP3 (18U) //!< Bit position for AIPS_PACRO_SP3. #define BM_AIPS_PACRO_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRO_SP3. #define BS_AIPS_PACRO_SP3 (1U) //!< Bit field size in bits for AIPS_PACRO_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_SP3 field. #define BR_AIPS_PACRO_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRO_SP3. #define BF_AIPS_PACRO_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP3), uint32_t) & BM_AIPS_PACRO_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRO_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRO_TP2 (20U) //!< Bit position for AIPS_PACRO_TP2. #define BM_AIPS_PACRO_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRO_TP2. #define BS_AIPS_PACRO_TP2 (1U) //!< Bit field size in bits for AIPS_PACRO_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_TP2 field. #define BR_AIPS_PACRO_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRO_TP2. #define BF_AIPS_PACRO_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP2), uint32_t) & BM_AIPS_PACRO_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRO_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRO_WP2 (21U) //!< Bit position for AIPS_PACRO_WP2. #define BM_AIPS_PACRO_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRO_WP2. #define BS_AIPS_PACRO_WP2 (1U) //!< Bit field size in bits for AIPS_PACRO_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_WP2 field. #define BR_AIPS_PACRO_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRO_WP2. #define BF_AIPS_PACRO_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP2), uint32_t) & BM_AIPS_PACRO_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRO_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRO_SP2 (22U) //!< Bit position for AIPS_PACRO_SP2. #define BM_AIPS_PACRO_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRO_SP2. #define BS_AIPS_PACRO_SP2 (1U) //!< Bit field size in bits for AIPS_PACRO_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_SP2 field. #define BR_AIPS_PACRO_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRO_SP2. #define BF_AIPS_PACRO_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP2), uint32_t) & BM_AIPS_PACRO_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRO_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRO_TP1 (24U) //!< Bit position for AIPS_PACRO_TP1. #define BM_AIPS_PACRO_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRO_TP1. #define BS_AIPS_PACRO_TP1 (1U) //!< Bit field size in bits for AIPS_PACRO_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_TP1 field. #define BR_AIPS_PACRO_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRO_TP1. #define BF_AIPS_PACRO_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP1), uint32_t) & BM_AIPS_PACRO_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRO_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRO_WP1 (25U) //!< Bit position for AIPS_PACRO_WP1. #define BM_AIPS_PACRO_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRO_WP1. #define BS_AIPS_PACRO_WP1 (1U) //!< Bit field size in bits for AIPS_PACRO_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_WP1 field. #define BR_AIPS_PACRO_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRO_WP1. #define BF_AIPS_PACRO_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP1), uint32_t) & BM_AIPS_PACRO_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRO_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRO_SP1 (26U) //!< Bit position for AIPS_PACRO_SP1. #define BM_AIPS_PACRO_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRO_SP1. #define BS_AIPS_PACRO_SP1 (1U) //!< Bit field size in bits for AIPS_PACRO_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_SP1 field. #define BR_AIPS_PACRO_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRO_SP1. #define BF_AIPS_PACRO_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP1), uint32_t) & BM_AIPS_PACRO_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRO_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRO_TP0 (28U) //!< Bit position for AIPS_PACRO_TP0. #define BM_AIPS_PACRO_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRO_TP0. #define BS_AIPS_PACRO_TP0 (1U) //!< Bit field size in bits for AIPS_PACRO_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_TP0 field. #define BR_AIPS_PACRO_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRO_TP0. #define BF_AIPS_PACRO_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP0), uint32_t) & BM_AIPS_PACRO_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRO_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRO_WP0 (29U) //!< Bit position for AIPS_PACRO_WP0. #define BM_AIPS_PACRO_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRO_WP0. #define BS_AIPS_PACRO_WP0 (1U) //!< Bit field size in bits for AIPS_PACRO_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_WP0 field. #define BR_AIPS_PACRO_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRO_WP0. #define BF_AIPS_PACRO_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP0), uint32_t) & BM_AIPS_PACRO_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRO_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRO, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRO_SP0 (30U) //!< Bit position for AIPS_PACRO_SP0. #define BM_AIPS_PACRO_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRO_SP0. #define BS_AIPS_PACRO_SP0 (1U) //!< Bit field size in bits for AIPS_PACRO_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRO_SP0 field. #define BR_AIPS_PACRO_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRO_SP0. #define BF_AIPS_PACRO_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP0), uint32_t) & BM_AIPS_PACRO_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRO_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRP - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRP - Peripheral Access Control Register (RW) * * Reset value: 0x44444444U * * This section describes PACR registers E-P, which control peripheral slots * 32-127. See PACRPeripheral Access Control Register for the description of these * registers. */ typedef union _hw_aips_pacrp { uint32_t U; struct _hw_aips_pacrp_bitfields { uint32_t TP7 : 1; //!< [0] Trusted Protect uint32_t WP7 : 1; //!< [1] Write Protect uint32_t SP7 : 1; //!< [2] Supervisor Protect uint32_t RESERVED0 : 1; //!< [3] uint32_t TP6 : 1; //!< [4] Trusted Protect uint32_t WP6 : 1; //!< [5] Write Protect uint32_t SP6 : 1; //!< [6] Supervisor Protect uint32_t RESERVED1 : 1; //!< [7] uint32_t TP5 : 1; //!< [8] Trusted Protect uint32_t WP5 : 1; //!< [9] Write Protect uint32_t SP5 : 1; //!< [10] Supervisor Protect uint32_t RESERVED2 : 1; //!< [11] uint32_t TP4 : 1; //!< [12] Trusted Protect uint32_t WP4 : 1; //!< [13] Write Protect uint32_t SP4 : 1; //!< [14] Supervisor Protect uint32_t RESERVED3 : 1; //!< [15] uint32_t TP3 : 1; //!< [16] Trusted Protect uint32_t WP3 : 1; //!< [17] Write Protect uint32_t SP3 : 1; //!< [18] Supervisor Protect uint32_t RESERVED4 : 1; //!< [19] uint32_t TP2 : 1; //!< [20] Trusted Protect uint32_t WP2 : 1; //!< [21] Write Protect uint32_t SP2 : 1; //!< [22] Supervisor Protect uint32_t RESERVED5 : 1; //!< [23] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED6 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED7 : 1; //!< [31] } B; } hw_aips_pacrp_t; #endif /*! * @name Constants and macros for entire AIPS_PACRP register */ //@{ #define HW_AIPS_PACRP_ADDR(x) (REGS_AIPS_BASE(x) + 0x6CU) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRP(x) (*(__IO hw_aips_pacrp_t *) HW_AIPS_PACRP_ADDR(x)) #define HW_AIPS_PACRP_RD(x) (HW_AIPS_PACRP(x).U) #define HW_AIPS_PACRP_WR(x, v) (HW_AIPS_PACRP(x).U = (v)) #define HW_AIPS_PACRP_SET(x, v) (HW_AIPS_PACRP_WR(x, HW_AIPS_PACRP_RD(x) | (v))) #define HW_AIPS_PACRP_CLR(x, v) (HW_AIPS_PACRP_WR(x, HW_AIPS_PACRP_RD(x) & ~(v))) #define HW_AIPS_PACRP_TOG(x, v) (HW_AIPS_PACRP_WR(x, HW_AIPS_PACRP_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRP bitfields */ /*! * @name Register AIPS_PACRP, field TP7[0] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRP_TP7 (0U) //!< Bit position for AIPS_PACRP_TP7. #define BM_AIPS_PACRP_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRP_TP7. #define BS_AIPS_PACRP_TP7 (1U) //!< Bit field size in bits for AIPS_PACRP_TP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_TP7 field. #define BR_AIPS_PACRP_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP7)) #endif //! @brief Format value for bitfield AIPS_PACRP_TP7. #define BF_AIPS_PACRP_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP7), uint32_t) & BM_AIPS_PACRP_TP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP7 field to a new value. #define BW_AIPS_PACRP_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field WP7[1] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRP_WP7 (1U) //!< Bit position for AIPS_PACRP_WP7. #define BM_AIPS_PACRP_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRP_WP7. #define BS_AIPS_PACRP_WP7 (1U) //!< Bit field size in bits for AIPS_PACRP_WP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_WP7 field. #define BR_AIPS_PACRP_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP7)) #endif //! @brief Format value for bitfield AIPS_PACRP_WP7. #define BF_AIPS_PACRP_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP7), uint32_t) & BM_AIPS_PACRP_WP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP7 field to a new value. #define BW_AIPS_PACRP_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field SP7[2] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRP_SP7 (2U) //!< Bit position for AIPS_PACRP_SP7. #define BM_AIPS_PACRP_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRP_SP7. #define BS_AIPS_PACRP_SP7 (1U) //!< Bit field size in bits for AIPS_PACRP_SP7. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_SP7 field. #define BR_AIPS_PACRP_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP7)) #endif //! @brief Format value for bitfield AIPS_PACRP_SP7. #define BF_AIPS_PACRP_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP7), uint32_t) & BM_AIPS_PACRP_SP7) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP7 field to a new value. #define BW_AIPS_PACRP_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP7) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field TP6[4] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRP_TP6 (4U) //!< Bit position for AIPS_PACRP_TP6. #define BM_AIPS_PACRP_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRP_TP6. #define BS_AIPS_PACRP_TP6 (1U) //!< Bit field size in bits for AIPS_PACRP_TP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_TP6 field. #define BR_AIPS_PACRP_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP6)) #endif //! @brief Format value for bitfield AIPS_PACRP_TP6. #define BF_AIPS_PACRP_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP6), uint32_t) & BM_AIPS_PACRP_TP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP6 field to a new value. #define BW_AIPS_PACRP_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field WP6[5] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRP_WP6 (5U) //!< Bit position for AIPS_PACRP_WP6. #define BM_AIPS_PACRP_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRP_WP6. #define BS_AIPS_PACRP_WP6 (1U) //!< Bit field size in bits for AIPS_PACRP_WP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_WP6 field. #define BR_AIPS_PACRP_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP6)) #endif //! @brief Format value for bitfield AIPS_PACRP_WP6. #define BF_AIPS_PACRP_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP6), uint32_t) & BM_AIPS_PACRP_WP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP6 field to a new value. #define BW_AIPS_PACRP_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field SP6[6] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRP_SP6 (6U) //!< Bit position for AIPS_PACRP_SP6. #define BM_AIPS_PACRP_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRP_SP6. #define BS_AIPS_PACRP_SP6 (1U) //!< Bit field size in bits for AIPS_PACRP_SP6. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_SP6 field. #define BR_AIPS_PACRP_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP6)) #endif //! @brief Format value for bitfield AIPS_PACRP_SP6. #define BF_AIPS_PACRP_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP6), uint32_t) & BM_AIPS_PACRP_SP6) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP6 field to a new value. #define BW_AIPS_PACRP_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP6) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field TP5[8] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRP_TP5 (8U) //!< Bit position for AIPS_PACRP_TP5. #define BM_AIPS_PACRP_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRP_TP5. #define BS_AIPS_PACRP_TP5 (1U) //!< Bit field size in bits for AIPS_PACRP_TP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_TP5 field. #define BR_AIPS_PACRP_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP5)) #endif //! @brief Format value for bitfield AIPS_PACRP_TP5. #define BF_AIPS_PACRP_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP5), uint32_t) & BM_AIPS_PACRP_TP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP5 field to a new value. #define BW_AIPS_PACRP_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field WP5[9] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRP_WP5 (9U) //!< Bit position for AIPS_PACRP_WP5. #define BM_AIPS_PACRP_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRP_WP5. #define BS_AIPS_PACRP_WP5 (1U) //!< Bit field size in bits for AIPS_PACRP_WP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_WP5 field. #define BR_AIPS_PACRP_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP5)) #endif //! @brief Format value for bitfield AIPS_PACRP_WP5. #define BF_AIPS_PACRP_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP5), uint32_t) & BM_AIPS_PACRP_WP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP5 field to a new value. #define BW_AIPS_PACRP_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field SP5[10] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRP_SP5 (10U) //!< Bit position for AIPS_PACRP_SP5. #define BM_AIPS_PACRP_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRP_SP5. #define BS_AIPS_PACRP_SP5 (1U) //!< Bit field size in bits for AIPS_PACRP_SP5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_SP5 field. #define BR_AIPS_PACRP_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP5)) #endif //! @brief Format value for bitfield AIPS_PACRP_SP5. #define BF_AIPS_PACRP_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP5), uint32_t) & BM_AIPS_PACRP_SP5) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP5 field to a new value. #define BW_AIPS_PACRP_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP5) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field TP4[12] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRP_TP4 (12U) //!< Bit position for AIPS_PACRP_TP4. #define BM_AIPS_PACRP_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRP_TP4. #define BS_AIPS_PACRP_TP4 (1U) //!< Bit field size in bits for AIPS_PACRP_TP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_TP4 field. #define BR_AIPS_PACRP_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP4)) #endif //! @brief Format value for bitfield AIPS_PACRP_TP4. #define BF_AIPS_PACRP_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP4), uint32_t) & BM_AIPS_PACRP_TP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP4 field to a new value. #define BW_AIPS_PACRP_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field WP4[13] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRP_WP4 (13U) //!< Bit position for AIPS_PACRP_WP4. #define BM_AIPS_PACRP_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRP_WP4. #define BS_AIPS_PACRP_WP4 (1U) //!< Bit field size in bits for AIPS_PACRP_WP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_WP4 field. #define BR_AIPS_PACRP_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP4)) #endif //! @brief Format value for bitfield AIPS_PACRP_WP4. #define BF_AIPS_PACRP_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP4), uint32_t) & BM_AIPS_PACRP_WP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP4 field to a new value. #define BW_AIPS_PACRP_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field SP4[14] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRP_SP4 (14U) //!< Bit position for AIPS_PACRP_SP4. #define BM_AIPS_PACRP_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRP_SP4. #define BS_AIPS_PACRP_SP4 (1U) //!< Bit field size in bits for AIPS_PACRP_SP4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_SP4 field. #define BR_AIPS_PACRP_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP4)) #endif //! @brief Format value for bitfield AIPS_PACRP_SP4. #define BF_AIPS_PACRP_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP4), uint32_t) & BM_AIPS_PACRP_SP4) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP4 field to a new value. #define BW_AIPS_PACRP_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP4) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field TP3[16] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRP_TP3 (16U) //!< Bit position for AIPS_PACRP_TP3. #define BM_AIPS_PACRP_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRP_TP3. #define BS_AIPS_PACRP_TP3 (1U) //!< Bit field size in bits for AIPS_PACRP_TP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_TP3 field. #define BR_AIPS_PACRP_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP3)) #endif //! @brief Format value for bitfield AIPS_PACRP_TP3. #define BF_AIPS_PACRP_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP3), uint32_t) & BM_AIPS_PACRP_TP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP3 field to a new value. #define BW_AIPS_PACRP_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field WP3[17] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRP_WP3 (17U) //!< Bit position for AIPS_PACRP_WP3. #define BM_AIPS_PACRP_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRP_WP3. #define BS_AIPS_PACRP_WP3 (1U) //!< Bit field size in bits for AIPS_PACRP_WP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_WP3 field. #define BR_AIPS_PACRP_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP3)) #endif //! @brief Format value for bitfield AIPS_PACRP_WP3. #define BF_AIPS_PACRP_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP3), uint32_t) & BM_AIPS_PACRP_WP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP3 field to a new value. #define BW_AIPS_PACRP_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field SP3[18] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRP_SP3 (18U) //!< Bit position for AIPS_PACRP_SP3. #define BM_AIPS_PACRP_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRP_SP3. #define BS_AIPS_PACRP_SP3 (1U) //!< Bit field size in bits for AIPS_PACRP_SP3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_SP3 field. #define BR_AIPS_PACRP_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP3)) #endif //! @brief Format value for bitfield AIPS_PACRP_SP3. #define BF_AIPS_PACRP_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP3), uint32_t) & BM_AIPS_PACRP_SP3) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP3 field to a new value. #define BW_AIPS_PACRP_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP3) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field TP2[20] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRP_TP2 (20U) //!< Bit position for AIPS_PACRP_TP2. #define BM_AIPS_PACRP_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRP_TP2. #define BS_AIPS_PACRP_TP2 (1U) //!< Bit field size in bits for AIPS_PACRP_TP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_TP2 field. #define BR_AIPS_PACRP_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP2)) #endif //! @brief Format value for bitfield AIPS_PACRP_TP2. #define BF_AIPS_PACRP_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP2), uint32_t) & BM_AIPS_PACRP_TP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP2 field to a new value. #define BW_AIPS_PACRP_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field WP2[21] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRP_WP2 (21U) //!< Bit position for AIPS_PACRP_WP2. #define BM_AIPS_PACRP_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRP_WP2. #define BS_AIPS_PACRP_WP2 (1U) //!< Bit field size in bits for AIPS_PACRP_WP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_WP2 field. #define BR_AIPS_PACRP_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP2)) #endif //! @brief Format value for bitfield AIPS_PACRP_WP2. #define BF_AIPS_PACRP_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP2), uint32_t) & BM_AIPS_PACRP_WP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP2 field to a new value. #define BW_AIPS_PACRP_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field SP2[22] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRP_SP2 (22U) //!< Bit position for AIPS_PACRP_SP2. #define BM_AIPS_PACRP_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRP_SP2. #define BS_AIPS_PACRP_SP2 (1U) //!< Bit field size in bits for AIPS_PACRP_SP2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_SP2 field. #define BR_AIPS_PACRP_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP2)) #endif //! @brief Format value for bitfield AIPS_PACRP_SP2. #define BF_AIPS_PACRP_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP2), uint32_t) & BM_AIPS_PACRP_SP2) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP2 field to a new value. #define BW_AIPS_PACRP_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP2) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRP_TP1 (24U) //!< Bit position for AIPS_PACRP_TP1. #define BM_AIPS_PACRP_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRP_TP1. #define BS_AIPS_PACRP_TP1 (1U) //!< Bit field size in bits for AIPS_PACRP_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_TP1 field. #define BR_AIPS_PACRP_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRP_TP1. #define BF_AIPS_PACRP_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP1), uint32_t) & BM_AIPS_PACRP_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRP_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field WP1[25] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRP_WP1 (25U) //!< Bit position for AIPS_PACRP_WP1. #define BM_AIPS_PACRP_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRP_WP1. #define BS_AIPS_PACRP_WP1 (1U) //!< Bit field size in bits for AIPS_PACRP_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_WP1 field. #define BR_AIPS_PACRP_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRP_WP1. #define BF_AIPS_PACRP_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP1), uint32_t) & BM_AIPS_PACRP_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRP_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master must * be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRP_SP1 (26U) //!< Bit position for AIPS_PACRP_SP1. #define BM_AIPS_PACRP_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRP_SP1. #define BS_AIPS_PACRP_SP1 (1U) //!< Bit field size in bits for AIPS_PACRP_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_SP1 field. #define BR_AIPS_PACRP_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRP_SP1. #define BF_AIPS_PACRP_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP1), uint32_t) & BM_AIPS_PACRP_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRP_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this bit is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRP_TP0 (28U) //!< Bit position for AIPS_PACRP_TP0. #define BM_AIPS_PACRP_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRP_TP0. #define BS_AIPS_PACRP_TP0 (1U) //!< Bit field size in bits for AIPS_PACRP_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_TP0 field. #define BR_AIPS_PACRP_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRP_TP0. #define BF_AIPS_PACRP_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP0), uint32_t) & BM_AIPS_PACRP_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRP_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRP_WP0 (29U) //!< Bit position for AIPS_PACRP_WP0. #define BM_AIPS_PACRP_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRP_WP0. #define BS_AIPS_PACRP_WP0 (1U) //!< Bit field size in bits for AIPS_PACRP_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_WP0 field. #define BR_AIPS_PACRP_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRP_WP0. #define BF_AIPS_PACRP_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP0), uint32_t) & BM_AIPS_PACRP_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRP_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRP, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRP_SP0 (30U) //!< Bit position for AIPS_PACRP_SP0. #define BM_AIPS_PACRP_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRP_SP0. #define BS_AIPS_PACRP_SP0 (1U) //!< Bit field size in bits for AIPS_PACRP_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRP_SP0 field. #define BR_AIPS_PACRP_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRP_SP0. #define BF_AIPS_PACRP_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP0), uint32_t) & BM_AIPS_PACRP_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRP_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AIPS_PACRU - Peripheral Access Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AIPS_PACRU - Peripheral Access Control Register (RW) * * Reset value: 0x44000000U * * PACRU defines the access levels for the two global spaces. */ typedef union _hw_aips_pacru { uint32_t U; struct _hw_aips_pacru_bitfields { uint32_t RESERVED0 : 24; //!< [23:0] uint32_t TP1 : 1; //!< [24] Trusted Protect uint32_t WP1 : 1; //!< [25] Write Protect uint32_t SP1 : 1; //!< [26] Supervisor Protect uint32_t RESERVED1 : 1; //!< [27] uint32_t TP0 : 1; //!< [28] Trusted Protect uint32_t WP0 : 1; //!< [29] Write Protect uint32_t SP0 : 1; //!< [30] Supervisor Protect uint32_t RESERVED2 : 1; //!< [31] } B; } hw_aips_pacru_t; #endif /*! * @name Constants and macros for entire AIPS_PACRU register */ //@{ #define HW_AIPS_PACRU_ADDR(x) (REGS_AIPS_BASE(x) + 0x80U) #ifndef __LANGUAGE_ASM__ #define HW_AIPS_PACRU(x) (*(__IO hw_aips_pacru_t *) HW_AIPS_PACRU_ADDR(x)) #define HW_AIPS_PACRU_RD(x) (HW_AIPS_PACRU(x).U) #define HW_AIPS_PACRU_WR(x, v) (HW_AIPS_PACRU(x).U = (v)) #define HW_AIPS_PACRU_SET(x, v) (HW_AIPS_PACRU_WR(x, HW_AIPS_PACRU_RD(x) | (v))) #define HW_AIPS_PACRU_CLR(x, v) (HW_AIPS_PACRU_WR(x, HW_AIPS_PACRU_RD(x) & ~(v))) #define HW_AIPS_PACRU_TOG(x, v) (HW_AIPS_PACRU_WR(x, HW_AIPS_PACRU_RD(x) ^ (v))) #endif //@} /* * Constants & macros for individual AIPS_PACRU bitfields */ /*! * @name Register AIPS_PACRU, field TP1[24] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRU_TP1 (24U) //!< Bit position for AIPS_PACRU_TP1. #define BM_AIPS_PACRU_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRU_TP1. #define BS_AIPS_PACRU_TP1 (1U) //!< Bit field size in bits for AIPS_PACRU_TP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRU_TP1 field. #define BR_AIPS_PACRU_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_TP1)) #endif //! @brief Format value for bitfield AIPS_PACRU_TP1. #define BF_AIPS_PACRU_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_TP1), uint32_t) & BM_AIPS_PACRU_TP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP1 field to a new value. #define BW_AIPS_PACRU_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_TP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRU, field WP1[25] (RW) * * Determines whether the peripheral allows write accesss. When this bit is set * and a write access is attempted, access terminates with an error response and * no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRU_WP1 (25U) //!< Bit position for AIPS_PACRU_WP1. #define BM_AIPS_PACRU_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRU_WP1. #define BS_AIPS_PACRU_WP1 (1U) //!< Bit field size in bits for AIPS_PACRU_WP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRU_WP1 field. #define BR_AIPS_PACRU_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_WP1)) #endif //! @brief Format value for bitfield AIPS_PACRU_WP1. #define BF_AIPS_PACRU_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_WP1), uint32_t) & BM_AIPS_PACRU_WP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP1 field to a new value. #define BW_AIPS_PACRU_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_WP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRU, field SP1[26] (RW) * * Determines whether the peripheral requires supervisor privilege level for * accesses. When this field is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control field for the master * must be set. If not, access terminates with an error response and no peripheral * access initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRU_SP1 (26U) //!< Bit position for AIPS_PACRU_SP1. #define BM_AIPS_PACRU_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRU_SP1. #define BS_AIPS_PACRU_SP1 (1U) //!< Bit field size in bits for AIPS_PACRU_SP1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRU_SP1 field. #define BR_AIPS_PACRU_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_SP1)) #endif //! @brief Format value for bitfield AIPS_PACRU_SP1. #define BF_AIPS_PACRU_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_SP1), uint32_t) & BM_AIPS_PACRU_SP1) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP1 field to a new value. #define BW_AIPS_PACRU_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_SP1) = (v)) #endif //@} /*! * @name Register AIPS_PACRU, field TP0[28] (RW) * * Determines whether the peripheral allows accesses from an untrusted master. * When this field is set and an access is attempted by an untrusted master, the * access terminates with an error response and no peripheral access initiates. * * Values: * - 0 - Accesses from an untrusted master are allowed. * - 1 - Accesses from an untrusted master are not allowed. */ //@{ #define BP_AIPS_PACRU_TP0 (28U) //!< Bit position for AIPS_PACRU_TP0. #define BM_AIPS_PACRU_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRU_TP0. #define BS_AIPS_PACRU_TP0 (1U) //!< Bit field size in bits for AIPS_PACRU_TP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRU_TP0 field. #define BR_AIPS_PACRU_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_TP0)) #endif //! @brief Format value for bitfield AIPS_PACRU_TP0. #define BF_AIPS_PACRU_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_TP0), uint32_t) & BM_AIPS_PACRU_TP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the TP0 field to a new value. #define BW_AIPS_PACRU_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_TP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRU, field WP0[29] (RW) * * Determines whether the peripheral allows write accesses. When this field is * set and a write access is attempted, access terminates with an error response * and no peripheral access initiates. * * Values: * - 0 - This peripheral allows write accesses. * - 1 - This peripheral is write protected. */ //@{ #define BP_AIPS_PACRU_WP0 (29U) //!< Bit position for AIPS_PACRU_WP0. #define BM_AIPS_PACRU_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRU_WP0. #define BS_AIPS_PACRU_WP0 (1U) //!< Bit field size in bits for AIPS_PACRU_WP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRU_WP0 field. #define BR_AIPS_PACRU_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_WP0)) #endif //! @brief Format value for bitfield AIPS_PACRU_WP0. #define BF_AIPS_PACRU_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_WP0), uint32_t) & BM_AIPS_PACRU_WP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the WP0 field to a new value. #define BW_AIPS_PACRU_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_WP0) = (v)) #endif //@} /*! * @name Register AIPS_PACRU, field SP0[30] (RW) * * Determines whether the peripheral requires supervisor privilege level for * access. When this bit is set, the master privilege level must indicate the * supervisor access attribute, and the MPRx[MPLn] control bit for the master must be * set. If not, access terminates with an error response and no peripheral access * initiates. * * Values: * - 0 - This peripheral does not require supervisor privilege level for * accesses. * - 1 - This peripheral requires supervisor privilege level for accesses. */ //@{ #define BP_AIPS_PACRU_SP0 (30U) //!< Bit position for AIPS_PACRU_SP0. #define BM_AIPS_PACRU_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRU_SP0. #define BS_AIPS_PACRU_SP0 (1U) //!< Bit field size in bits for AIPS_PACRU_SP0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AIPS_PACRU_SP0 field. #define BR_AIPS_PACRU_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_SP0)) #endif //! @brief Format value for bitfield AIPS_PACRU_SP0. #define BF_AIPS_PACRU_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_SP0), uint32_t) & BM_AIPS_PACRU_SP0) #ifndef __LANGUAGE_ASM__ //! @brief Set the SP0 field to a new value. #define BW_AIPS_PACRU_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_SP0) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // hw_aips_t - module struct //------------------------------------------------------------------------------------------- /*! * @brief All AIPS module registers. */ #ifndef __LANGUAGE_ASM__ #pragma pack(1) typedef struct _hw_aips { __IO hw_aips_mpra_t MPRA; //!< [0x0] Master Privilege Register A uint8_t _reserved0[28]; __IO hw_aips_pacra_t PACRA; //!< [0x20] Peripheral Access Control Register __IO hw_aips_pacrb_t PACRB; //!< [0x24] Peripheral Access Control Register __IO hw_aips_pacrc_t PACRC; //!< [0x28] Peripheral Access Control Register __IO hw_aips_pacrd_t PACRD; //!< [0x2C] Peripheral Access Control Register uint8_t _reserved1[16]; __IO hw_aips_pacre_t PACRE; //!< [0x40] Peripheral Access Control Register __IO hw_aips_pacrf_t PACRF; //!< [0x44] Peripheral Access Control Register __IO hw_aips_pacrg_t PACRG; //!< [0x48] Peripheral Access Control Register __IO hw_aips_pacrh_t PACRH; //!< [0x4C] Peripheral Access Control Register __IO hw_aips_pacri_t PACRI; //!< [0x50] Peripheral Access Control Register __IO hw_aips_pacrj_t PACRJ; //!< [0x54] Peripheral Access Control Register __IO hw_aips_pacrk_t PACRK; //!< [0x58] Peripheral Access Control Register __IO hw_aips_pacrl_t PACRL; //!< [0x5C] Peripheral Access Control Register __IO hw_aips_pacrm_t PACRM; //!< [0x60] Peripheral Access Control Register __IO hw_aips_pacrn_t PACRN; //!< [0x64] Peripheral Access Control Register __IO hw_aips_pacro_t PACRO; //!< [0x68] Peripheral Access Control Register __IO hw_aips_pacrp_t PACRP; //!< [0x6C] Peripheral Access Control Register uint8_t _reserved2[16]; __IO hw_aips_pacru_t PACRU; //!< [0x80] Peripheral Access Control Register } hw_aips_t; #pragma pack() //! @brief Macro to access all AIPS registers. //! @param x AIPS instance number. //! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, //! use the '&' operator, like <code>&HW_AIPS(0)</code>. #define HW_AIPS(x) (*(hw_aips_t *) REGS_AIPS_BASE(x)) #endif #endif // __HW_AIPS_REGISTERS_H__ // v22/130726/0.9 // EOF