mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/pwmout_api.c
- Committer:
- mbed_official
- Date:
- 2014-02-03
- Revision:
- 84:f54042cbc282
- Parent:
- 76:aeb1df146756
- Child:
- 129:0182c99221bc
File content as of revision 84:f54042cbc282:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #include "pwmout_api.h" #include "cmsis.h" #include "pinmap.h" #include "error.h" static const PinMap PinMap_PWM[] = { {PB_3, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_TIM2)}, // TIM2_CH2 {PB_4, PWM_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_TIM3)}, // TIM3_CH1 {PB_6, PWM_4, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_TIM4)}, // TIM4_CH1 {NC, NC, 0} }; void pwmout_init(pwmout_t* obj, PinName pin) { // Get the peripheral name from the pin and assign it to the object obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM); if (obj->pwm == (PWMName)NC) { error("PWM pinout mapping failed"); } // Enable TIM clock if (obj->pwm == PWM_2) RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE); if (obj->pwm == PWM_3) RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE); if (obj->pwm == PWM_4) RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE); // Configure GPIO pinmap_pinout(pin, PinMap_PWM); obj->pin = pin; obj->period = 0; obj->pulse = 0; pwmout_period_us(obj, 20000); // 20 ms per default } void pwmout_free(pwmout_t* obj) { TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm); TIM_DeInit(tim); } void pwmout_write(pwmout_t* obj, float value) { TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm); TIM_OCInitTypeDef TIM_OCInitStructure; if (value < 0.0) { value = 0.0; } else if (value > 1.0) { value = 1.0; } obj->pulse = (uint32_t)((float)obj->period * value); TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1; TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; TIM_OCInitStructure.TIM_Pulse = obj->pulse; TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High; // Configure channel 1 if ((obj->pin == PB_4) || (obj->pin == PB_6)) { TIM_OC1PreloadConfig(tim, TIM_OCPreload_Enable); TIM_OC1Init(tim, &TIM_OCInitStructure); } // Configure channel 2 if (obj->pin == PB_3) { TIM_OC2PreloadConfig(tim, TIM_OCPreload_Enable); TIM_OC2Init(tim, &TIM_OCInitStructure); } } float pwmout_read(pwmout_t* obj) { float value = 0; if (obj->period > 0) { value = (float)(obj->pulse) / (float)(obj->period); } return ((value > 1.0) ? (1.0) : (value)); } void pwmout_period(pwmout_t* obj, float seconds) { pwmout_period_us(obj, seconds * 1000000.0f); } void pwmout_period_ms(pwmout_t* obj, int ms) { pwmout_period_us(obj, ms * 1000); } void pwmout_period_us(pwmout_t* obj, int us) { TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm); TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; float dc = pwmout_read(obj); TIM_Cmd(tim, DISABLE); obj->period = us; TIM_TimeBaseStructure.TIM_Period = obj->period - 1; TIM_TimeBaseStructure.TIM_Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick TIM_TimeBaseStructure.TIM_ClockDivision = 0; TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; TIM_TimeBaseInit(tim, &TIM_TimeBaseStructure); // Set duty cycle again pwmout_write(obj, dc); TIM_ARRPreloadConfig(tim, ENABLE); TIM_Cmd(tim, ENABLE); } void pwmout_pulsewidth(pwmout_t* obj, float seconds) { pwmout_pulsewidth_us(obj, seconds * 1000000.0f); } void pwmout_pulsewidth_ms(pwmout_t* obj, int ms) { pwmout_pulsewidth_us(obj, ms * 1000); } void pwmout_pulsewidth_us(pwmout_t* obj, int us) { float value = (float)us / (float)obj->period; pwmout_write(obj, value); }