mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51822_MKIT/PinNames.h
- Committer:
- mbed_official
- Date:
- 2014-08-01
- Revision:
- 270:e2babe29baf8
- Parent:
- targets/hal/TARGET_NORDIC/TARGET_NRF51822/TARGET_HRM1017/PinNames.h@ 246:c22b0f22a58f
File content as of revision 270:e2babe29baf8:
/* mbed Microcontroller Library * Copyright (c) 2013 Nordic Semiconductor * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 3 typedef enum { p0 = 0, p1 = 1, p2 = 2, p3 = 3, p4 = 4, p5 = 5, p6 = 6, p7 = 7, p8 = 8, p9 = 9, p10 = 10, p11 = 11, p12 = 12, p13 = 13, p14 = 14, p15 = 15, p16 = 16, p17 = 17, p18 = 18, p19 = 19, p20 = 20, p21 = 21, p22 = 22, p23 = 23, p24 = 24, p25 = 25, p26 = 26, p27 = 27, p28 = 28, p29 = 29, p30 = 30, // p31=31, P0_0 = p0, P0_1 = p1, P0_2 = p2, P0_3 = p3, P0_4 = p4, P0_5 = p5, P0_6 = p6, P0_7 = p7, P0_8 = p8, P0_9 = p9, P0_10 = p10, P0_11 = p11, P0_12 = p12, P0_13 = p13, P0_14 = p14, P0_15 = p15, P0_16 = p16, P0_17 = p17, P0_18 = p18, P0_19 = p19, P0_20 = p20, P0_21 = p21, P0_22 = p22, P0_23 = p23, P0_24 = p24, P0_25 = p25, P0_26 = p26, P0_27 = p27, P0_28 = p28, P0_29 = p29, P0_30 = p30, LED1 = p18, LED2 = p19, LED3 = p18, LED4 = p19, BUTTON1 = p16, BUTTON2 = p17, RX_PIN_NUMBER = p11, TX_PIN_NUMBER = p9, CTS_PIN_NUMBER = p10, RTS_PIN_NUMBER = p8, // mBed interface Pins USBTX = TX_PIN_NUMBER, USBRX = RX_PIN_NUMBER, SPI_PSELMOSI0 = p20, SPI_PSELMISO0 = p22, SPI_PSELSS0 = p24, SPI_PSELSCK0 = p25, SPI_PSELMOSI1 = p12, SPI_PSELMISO1 = p13, SPI_PSELSS1 = p14, SPI_PSELSCK1 = p15, SPIS_PSELMOSI = p12, SPIS_PSELMISO = p13, SPIS_PSELSS = p14, SPIS_PSELSCK = p15, I2C_SDA0 = p22, I2C_SCL0 = p20, I2C_SDA1 = p13, I2C_SCL1 = p15, // Not connected NC = (int)0xFFFFFFFF } PinName; typedef enum { PullNone = 0, PullDown = 1, PullUp = 3, PullDefault = PullUp } PinMode; #ifdef __cplusplus } #endif #endif