mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_NXP/TARGET_LPC176X/TARGET_ARCH_PRO/PinNames.h
- Committer:
- mbed_official
- Date:
- 2014-06-11
- Revision:
- 226:b062af740e40
File content as of revision 226:b062af740e40:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 5 typedef enum { // LPC Pin Names P0_0 = LPC_GPIO0_BASE, P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31, P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31, P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31, P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31, P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31, // mbed DIP Pin Names p5 = P0_9, p6 = P0_8, p7 = P0_7, p8 = P0_6, p9 = P0_0, p10 = P0_1, p11 = P0_18, p12 = P0_17, p13 = P0_15, p14 = P0_16, p15 = P0_23, p16 = P0_24, p17 = P0_25, p18 = P0_26, p19 = P1_30, p20 = P1_31, p21 = P2_5, p22 = P2_4, p23 = P2_3, p24 = P2_2, p25 = P2_1, p26 = P2_0, p27 = P0_11, p28 = P0_10, p29 = P0_5, p30 = P0_4, // Other mbed Pin Names #ifdef MCB1700 LED1 = P1_28, LED2 = P1_29, LED3 = P1_31, LED4 = P2_2, #else LED1 = P1_18, LED2 = P1_20, LED3 = P1_21, LED4 = P1_23, #endif USBTX = P0_2, USBRX = P0_3, // Arch Pro Pin Names D0 = P4_29, D1 = P4_28, D2 = P0_4, D3 = P0_5, D4 = P2_2, D5 = P2_3, D6 = P2_4, D7 = P2_5, D8 = P0_0, D9 = P0_1, D10 = P0_6, D11 = P0_9, D12 = P0_8, D13 = P0_7, D14 = P0_27, D15 = P0_28, A0 = P0_23, A1 = P0_24, A2 = P0_25, A3 = P0_26, A4 = P1_30, A5 = P1_31, I2C_SCL = D15, I2C_SDA = D14, // Not connected NC = (int)0xFFFFFFFF } PinName; typedef enum { PullUp = 0, PullDown = 3, PullNone = 2, OpenDrain = 4, PullDefault = PullDown } PinMode; // version of PINCON_TypeDef using register arrays typedef struct { __IO uint32_t PINSEL[11]; uint32_t RESERVED0[5]; __IO uint32_t PINMODE[10]; __IO uint32_t PINMODE_OD[5]; } PINCONARRAY_TypeDef; #define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE) #ifdef __cplusplus } #endif #endif