mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_STM/TARGET_DISCO_F303VC/pwmout_api.c
- Committer:
- mbed_official
- Date:
- 2014-07-08
- Revision:
- 250:a49055e7a707
- Parent:
- 241:ffe41b0c8126
- Child:
- 251:de9a1e4ffd79
File content as of revision 250:a49055e7a707:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #include "pwmout_api.h" #if DEVICE_PWMOUT #include "cmsis.h" #include "pinmap.h" #include "mbed_error.h" // TIM2 cannot be used because already used by the us_ticker static const PinMap PinMap_PWM[] = { // {PA_0, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH1 // {PA_1, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH2 {PA_1, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_9)}, // TIM15_CH1N {PA_2, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_9)}, // TIM15_CH1 {PA_3, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_9)}, // TIM15_CH2 // {PA_5, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH1 {PA_6, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1 {PA_7, PWM_17, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM17_CH1 // {PA_7, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH1N {PA_8, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH1 {PA_9, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH2 // {PA_9, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_10)}, // TIM2_CH3 {PA_10, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH3 // {PA_10, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_10)}, // TIM2_CH4 {PA_11, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_11)}, // TIM1_CH4 // {PA_11, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH1N {PA_12, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1 // {PA_12, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH2N {PA_13, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1N // {PA_15, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH1 {PB_0, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH2N {PB_1, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH3N // {PB_3, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH2 {PB_4, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1 {PB_5, PWM_17, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_10)}, // TIM17_CH1 {PB_6, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1N {PB_7, PWM_17, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM17_CH1N {PB_8, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1 {PB_9, PWM_17, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM17_CH1 // {PB_10, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH3 // {PB_11, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH4 {PB_13, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH1N {PB_14, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM15_CH1 // {PB_14, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH2N {PB_15, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM15_CH2 // {PB_15, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM15_CH1N // {PB_15, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_4)}, // TIM1_CH3N {PC_0, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM1_CH1 {PC_1, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM1_CH2 {PC_2, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM1_CH3 {PC_3, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM1_CH4 {PC_13, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_4)}, // TIM1_CH1N {PF_0, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH3N {NC, NC, 0} }; void pwmout_init(pwmout_t* obj, PinName pin) { // Get the peripheral name from the pin and assign it to the object obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM); MBED_ASSERT(obj->pwm != (PWMName)NC); // Enable TIM clock if (obj->pwm == PWM_1) RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE); if (obj->pwm == PWM_15) RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM15, ENABLE); if (obj->pwm == PWM_16) RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM16, ENABLE); if (obj->pwm == PWM_17) RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM17, ENABLE); // Configure GPIO pinmap_pinout(pin, PinMap_PWM); obj->pin = pin; obj->period = 0; obj->pulse = 0; pwmout_period_us(obj, 20000); // 20 ms per default } void pwmout_free(pwmout_t* obj) { TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm); TIM_DeInit(tim); } void pwmout_write(pwmout_t* obj, float value) { TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm); TIM_OCInitTypeDef TIM_OCInitStructure; if (value < (float)0.0) { value = (float)0.0; } else if (value > (float)1.0) { value = (float)1.0; } obj->pulse = (uint32_t)((float)obj->period * value); // Configure channels TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1; TIM_OCInitStructure.TIM_Pulse = obj->pulse; TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High; TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCPolarity_High; TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Reset; TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCNIdleState_Reset; switch (obj->pin) { // Channels 1 // case PA_0: case PA_2: // case PA_5: case PA_6: case PA_7: case PA_8: case PA_12: // case PA_15: case PB_4: case PB_5: case PB_8: case PB_9: case PB_14: case PC_0: TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; TIM_OC1PreloadConfig(tim, TIM_OCPreload_Enable); TIM_OC1Init(tim, &TIM_OCInitStructure); break; // Channels 1N case PA_1: // case PA_7: // case PA_11: case PA_13: case PB_6: case PB_7: case PB_13: // case PB_15: case PC_13: TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable; TIM_OC1PreloadConfig(tim, TIM_OCPreload_Enable); TIM_OC1Init(tim, &TIM_OCInitStructure); break; // Channels 2 // case PA_1: case PA_3: case PA_9: // case PB_3: case PB_15: case PC_1: TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; TIM_OC2PreloadConfig(tim, TIM_OCPreload_Enable); TIM_OC2Init(tim, &TIM_OCInitStructure); break; // Channels 2N // case PA_12: case PB_0: // case PB_14: TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable; TIM_OC2PreloadConfig(tim, TIM_OCPreload_Enable); TIM_OC2Init(tim, &TIM_OCInitStructure); break; // Channels 3 // case PA_9: case PA_10: // case PB_10: case PC_2: TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; TIM_OC3PreloadConfig(tim, TIM_OCPreload_Enable); TIM_OC3Init(tim, &TIM_OCInitStructure); break; // Channels 3N case PB_1: case PF_0: // case PB_15: TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable; TIM_OC3PreloadConfig(tim, TIM_OCPreload_Enable); TIM_OC3Init(tim, &TIM_OCInitStructure); break; // Channels 4 // case PA_10: case PA_11: // case PB_11: case PC_3: TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; TIM_OC4PreloadConfig(tim, TIM_OCPreload_Enable); TIM_OC4Init(tim, &TIM_OCInitStructure); break; default: return; } } float pwmout_read(pwmout_t* obj) { float value = 0; if (obj->period > 0) { value = (float)(obj->pulse) / (float)(obj->period); } return ((value > (float)1.0) ? ((float)1.0) : (value)); } void pwmout_period(pwmout_t* obj, float seconds) { pwmout_period_us(obj, seconds * 1000000.0f); } void pwmout_period_ms(pwmout_t* obj, int ms) { pwmout_period_us(obj, ms * 1000); } void pwmout_period_us(pwmout_t* obj, int us) { TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm); TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; float dc = pwmout_read(obj); TIM_Cmd(tim, DISABLE); obj->period = us; TIM_TimeBaseStructInit(&TIM_TimeBaseStructure); TIM_TimeBaseStructure.TIM_Period = obj->period - 1; TIM_TimeBaseStructure.TIM_Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick TIM_TimeBaseStructure.TIM_ClockDivision = 0; TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; TIM_TimeBaseInit(tim, &TIM_TimeBaseStructure); // Set duty cycle again pwmout_write(obj, dc); TIM_ARRPreloadConfig(tim, ENABLE); // Warning: Main Output must be enabled on TIM1, TIM8, TIM5, TIM6 and TIM17 if ((obj->pwm == PWM_1) || (obj->pwm == PWM_15) || (obj->pwm == PWM_16) || (obj->pwm == PWM_17)) { TIM_CtrlPWMOutputs(tim, ENABLE); } TIM_Cmd(tim, ENABLE); } void pwmout_pulsewidth(pwmout_t* obj, float seconds) { pwmout_pulsewidth_us(obj, seconds * 1000000.0f); } void pwmout_pulsewidth_ms(pwmout_t* obj, int ms) { pwmout_pulsewidth_us(obj, ms * 1000); } void pwmout_pulsewidth_us(pwmout_t* obj, int us) { float value = (float)us / (float)obj->period; pwmout_write(obj, value); } #endif