mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_STM/TARGET_DISCO_F100RB/PinNames.h
- Committer:
- shaoziyang
- Date:
- 2014-09-13
- Revision:
- 323:9e901b0a5aa1
- Parent:
- 126:549ba18ddd81
File content as of revision 323:9e901b0a5aa1:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif // MODE (see GPIOMode_TypeDef structure) // AFNUM (see AF_mapping constant table) #define STM_PIN_DATA(MODE, AFNUM) (((MODE) << 8) | (AFNUM)) #define STM_PIN_MODE(X) ((X) >> 8) #define STM_PIN_AFNUM(X) ((X) & 0xFF) // High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H) // Low nibble = pin number #define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) #define STM_PIN(X) ((uint32_t)(X) & 0xF) typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; typedef enum { PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13, PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_11 = 0x1B, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_3 = 0x23, PC_4 = 0x24, PC_5 = 0x25, PC_6 = 0x26, PC_7 = 0x27, PC_8 = 0x28, PC_9 = 0x29, PC_10 = 0x2A, PC_11 = 0x2B, PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F, PD_0 = 0x30, PD_1 = 0x31, PD_2 = 0x32, // Arduino connector namings PA0 = PA_0, PA1 = PA_1, PA2 = PA_2, PA3 = PA_3, PA4 = PA_4, PA5 = PA_5, PA6 = PA_6, PA7 = PA_7, PA8 = PA_8, PA9 = PA_9, PA10 = PA_10, PA11 = PA_11, PA12 = PA_12, PA13 = PA_13, PA14 = PA_14, PA15 = PA_15, PC4 = PC_4, PC5 = PC_5, PC6 = PC_6, PC7 = PC_7, PC8 = PC_8, PC9 = PC_9, PC10 = PC_10, PC11 = PC_13, PC12 = PC_12, PD2 = PD_2, PB1 = PB_1, PB2 = PB_2, PB3 = PB_3, PB4 = PB_4, PB5 = PB_5, PB6 = PB_6, PB7 = PB_7, PB8 = PB_8, PB9 = PB_9, PB10 = PB_10, PB11 = PB_11, PB12 = PB_12, PB13 = PB_13, PB14 = PB_14, PB15 = PB_15, // Generic signals namings LED1 = PC_9, LED2 = PC_8, LED3 = PC_9, LED4 = PC_8, USER_BUTTON = PA_0, USBTX = PA_2, USBRX = PA_3, I2C_SCL = PB_6, I2C_SDA = PB_7, SPI_MOSI = PB_15, SPI_MISO = PB_14, SPI_SCK = PB_13, SPI_CS = PB_12, PWM_OUT = PB_8, // Not connected NC = (int)0xFFFFFFFF } PinName; typedef enum { PullNone = 0, PullUp = 1, PullDown = 2, OpenDrain = 3, PullDefault = PullNone } PinMode; #ifdef __cplusplus } #endif #endif