mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_NXP/TARGET_LPC408X/PinNames.h
- Committer:
- shaoziyang
- Date:
- 2014-09-13
- Revision:
- 323:9e901b0a5aa1
- Parent:
- 191:69dccf9d09a7
File content as of revision 323:9e901b0a5aa1:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 5 typedef enum { // LPC Pin Names P0_0 = /*LPC_GPIO0_BASE*/0, P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31, P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31, P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31, P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31, P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31, P5_0, P5_1, P5_2, P5_3, P5_4, // mbed DIP Pin Names p5 = P1_24, p6 = P1_23, p7 = P1_20, p8 = P0_21, p9 = P0_0, p10 = P0_1, p11 = P0_9, p12 = P0_8, p13 = P0_7, p14 = P0_6, p15 = P0_23, p16 = P0_24, p17 = P0_25, p18 = P0_26, p19 = P1_30, p20 = P1_31, p23 = P2_10, p24 = P1_12, p25 = P1_11, p26 = P1_7, p27 = P1_6, p28 = P1_5, p29 = P1_3, p30 = P1_2, p31 = P5_3, p32 = P5_2, p33 = P0_5, p34 = P0_4, p37 = P5_4, p38 = P5_1, p39 = P5_0, // Other mbed Pin Names LED1 = P1_18, LED2 = P0_13, LED3 = P1_13, LED4 = P2_19, USBTX = P0_2, USBRX = P0_3, // QSB baseboard Arduino shield pins D0 = p10, D1 = p9, D2 = p31, D3 = p32, D4 = p33, D5 = p37, D6 = p38, D7 = p34, D8 = p8, D9 = p39, D10 = p14, D11 = p11, D12 = p12, D13 = p13, D14 = p19, D15 = p20, A0 = p15, A1 = p16, A2 = p17, A3 = p18, A4 = p19, A5 = p20, // Not connected NC = (int)0xFFFFFFFF } PinName; typedef enum { PullUp = 2, PullDown = 1, PullNone = 0, OpenDrain = 4, PullDefault = PullDown } PinMode; #ifdef __cplusplus } #endif #endif