mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_0_0/s110_nrf51822_7.0.0_API/doc/ble_api.dox
- Committer:
- shaoziyang
- Date:
- 2014-09-13
- Revision:
- 323:9e901b0a5aa1
- Parent:
- 277:0dffe5d9e928
File content as of revision 323:9e901b0a5aa1:
/** * @addtogroup BLE_COMMON * @{ * @defgroup BLE_COMMON_MSC Message Sequence Charts * @{ * @defgroup BLE_COMMON_IRQ_EVT_MSC Interrupt-driven Event Retrieval * @msc * hscale = "1.5"; * APP,SD; * |||; * APP=>SD [label = "sd_softdevice_enable(clock, assertion_handler);"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP=>SD [label = "sd_nvic_EnableIRQ(SD_EVENT_IRQn)"]; * APP<<SD [label = "NRF_SUCCESS"]; * |||; * APP rbox SD [label="Application runs and uses SD API"]; * |||; * SD rbox SD [label="Event Available for the App"]; * |||; * APP<-SD [label = "SD_EVENT_IRQn", textcolor="#800080", linecolor="#800080"]; * APP=>APP [label = "SD_EVENT_IRQHandler()"]; * APP=>SD [label = "sd_ble_evt_get(buffer);"]; * APP<<SD [label = "{NRF_SUCCESS, event}"]; * |||; * @endmsc * * @defgroup BLE_COMMON_THREAD_EVT_MSC Thread Mode Event Retrieval * @msc * hscale = "1.5"; * APP,SD; * |||; * APP=>SD [label = "sd_softdevice_enable(clock, assertion_handler);"]; * APP<<SD [label = "NRF_SUCCESS"]; * |||; * APP=>SD [label = "sd_app_evt_wait(void);"]; * APP rbox APP [label="App Thread Mode blocked, CPU in low power mode"]; * |||; * ...; * |||; * SD rbox SD [label="Event Available for the App"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP=>SD [label = "sd_ble_evt_get(buffer);"]; * APP<<SD [label = "{NRF_SUCCESS, event}"]; * APP=>SD [label = "sd_app_evt_wait(void);"]; * APP rbox APP [label="App Thread Mode blocked, CPU in low power mode"]; * |||; * ...; * |||; * SD rbox SD [label="Event Available for the App"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP=>SD [label = "sd_ble_evt_get(buffer);"]; * APP<<SD [label = "{NRF_SUCCESS, event}"]; * APP=>SD [label = "sd_app_evt_wait(void);"]; * APP rbox APP [label="App Thread Mode blocked, CPU in low power mode"]; * |||; * ...; * |||; * @endmsc * * @defgroup BLE_COMMON_APP_BUFF_MSC App Buffer Management * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP=>SD [label = "sd_ble_tx_buffer_count_get();"]; * APP<<SD [label = "{NRF_SUCCESS, N}"]; * APP rbox APP [label="available = N"]; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP=>SD [label = "sd_ble_gattc_write(handle, value)"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP rbox APP [label="available--"]; * SD:>PEER [label = "ATT Write Command", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_TX_COMPLETE {1}"]; * APP rbox APP [label="available += 1"]; * |||; * ...; * |||; * APP=>SD [label = "sd_ble_gatts_hvx(NOTIFICATION, app_value)"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP rbox APP [label="available--"]; * SD:>PEER [label = "ATT Handle Value Notification", textcolor="#000080", linecolor="#000080"]; * APP=>SD [label = "sd_ble_gatts_hvx(NOTIFICATION, app_value)"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP rbox APP [label="available--"]; * SD:>PEER [label = "ATT Handle Value Notification", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_TX_COMPLETE {2}"]; * APP rbox APP [label="available += 2"]; * |||; * ...; * |||; * APP rbox PEER [label="Terminate Connection"]; * |||; * APP rbox APP [label="available = N"]; * |||; * @endmsc * @} * @} */ /** * @addtogroup BLE_GAP * @{ * @defgroup BLE_GAP_MSC Message Sequence Charts * @{ * @defgroup BLE_GAP_ADV_MSC GAP Advertisement * @msc * hscale = "1.5"; * APP,SD,SCANNERS; * |||; * APP=>SD [label = "sd_ble_gap_address_set(addr)"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP=>SD [label = "sd_ble_gap_adv_data_set(adv, sr)"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP=>SD [label = "sd_ble_gap_adv_start(params)"]; * APP<<SD [label = "NRF_SUCCESS"]; * |||; * SD->SCANNERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"]; * SD->SCANNERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"]; * SD->SCANNERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"]; * ...; * SD->SCANNERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"]; * |||; * --- [label = " Variant #1 App Stops Advertisement "]; * APP=>SD [label = "sd_ble_gap_adv_stop()"]; * APP<<SD [label = "NRF_SUCCESS"]; * |||; * --- [label = " Variant #2 Advertisement Timeout "]; * APP<<=SD [label = "BLE_GAP_EVT_TIMEOUT"]; * @endmsc * * @defgroup BLE_GAP_CONN_MSC GAP Connection Establishment and Termination * @msc * hscale = "1.5"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Start Advertising"]; * |||; * SD<:>CENTRAL [label = "Connection Establishment", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_CONNECTED"]; * |||; * --- [label = " Variant #1 Local Disconnection "]; * APP=>SD [label = "sd_ble_gap_disconnect(reason)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "Connection Termination", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_DISCONNECTED {reason}"]; * |||; * --- [label = " Variant #2 Remote Disconnection "]; * SD<:CENTRAL [label = "Connection Termination", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_DISCONNECTED {reason}"]; * @endmsc * * @defgroup BLE_GAP_CPU_MSC GAP Connection Parameter Update * @msc * hscale = "1.5"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established with conn. params. CP#1"]; * |||; * APP=>SD [label = "sd_ble_gap_conn_param_update(CP#2)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "L2CAP CPU Request", textcolor="#000080", linecolor="#000080"]; * |||; * --- [label = " Variant #1 Central Accepts "]; * |||; * SD<:CENTRAL [label = "L2CAP CPU Response: Accepted", textcolor="#000080", linecolor="#000080"]; * |||; * SD<:CENTRAL [label = "Connection Update", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {CP#2}"]; * |||; * --- [label = " Variant #2 Central Rejects "]; * |||; * SD<:CENTRAL [label = "L2CAP CPU Response: Rejected", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {CP#1}"]; * --- [label = " Variant #3 Central Ignores "]; * |||; * ...; * |||; * SD box SD [label="Timeout"]; * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {CP#1}"]; * @endmsc * * @defgroup BLE_GAP_RSSI_MSC GAP RSSI * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP=>SD [label = "sd_ble_gap_rssi_start()"]; * APP<<SD [label = "NRF_SUCCESS"]; * |||; * SD<-PEER [label = "RSSI Sample", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#1}"]; * |||; * SD<-PEER [label = "RSSI Sample", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#2}"]; * |||; * SD<-PEER [label = "RSSI Sample", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#3}"]; * |||; * APP=>SD [label = "sd_ble_gap_rssi_stop()"]; * APP<<SD [label = "NRF_SUCCESS"]; * @endmsc * * @defgroup BLE_GAP_PAIRING_JW_MSC GAP Pairing: Just Works * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: no_bond, no_mitm, no_io_caps}"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: no_bond, no_mitm, no_io_caps)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"]; * |||; * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"]; * |||; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS}"]; * APP rbox CENTRAL [label = "Encrypted with STK"]; * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_NO_MITM}"]; * @endmsc * * @defgroup BLE_GAP_BONDING_JW_MSC GAP Bonding: Just Works * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: bond, no_mitm, no_io_caps}"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: bond, no_mitm, no_io_caps)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"]; * |||; * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"]; * |||; * APP rbox CENTRAL [label = "Encrypted with STK"]; * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_NO_MITM}"]; * |||; * SD abox CENTRAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"]; * |||; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS, periph_keys}"]; * APP rbox APP [label = "Store Peripheral Keys"]; * @endmsc * * @defgroup BLE_GAP_BONDING_PK_PERIPH_MSC GAP Bonding: Passkey Entry, Peripheral displays * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: bond, mitm, keyboard}"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: bond, mitm, display)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_PASSKEY_DISPLAY {passkey}"]; * APP rbox APP [label="Passkey displayed to the user"]; * |||; * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"]; * |||; * APP rbox CENTRAL [label = "Encrypted with STK"]; * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_MITM}"]; * |||; * SD abox CENTRAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"]; * |||; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS, periph_keys}"]; * APP rbox APP [label = "Store Peripheral Keys"]; * @endmsc * * @defgroup BLE_GAP_BONDING_PK_CENTRAL_OOB_MSC GAP Bonding: Passkey Entry (Central display) or OOB MSC * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: bond, mitm, display}"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: bond, mitm, keyboard)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_KEY_REQUEST {type}"]; * APP rbox APP [label="User enters Passkey or data received Out Of Band"]; * APP=>SD [label = "sd_ble_gap_auth_key_reply(passkey or OOB)"]; * APP<<SD [label = "NRF_SUCCESS"]; * |||; * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"]; * |||; * APP rbox CENTRAL [label = "Encrypted with STK"]; * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_MITM}"]; * |||; * SD abox CENTRAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"]; * |||; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS, periph_keys}"]; * APP rbox APP [label = "Store Peripheral Keys"]; * @endmsc * * @defgroup BLE_GAP_BONDING_STATIC_PK_PERIPHERAL GAP Bonding: Passkey Entry (Peripheral uses static passkey) MSC * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP=>SD [label = "sd_ble_opt_set(opt_id = BLE_GAP_OPT_PASSKEY, p_opt->p_passkey=passkey)"]; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: bond, mitm, keyboard}"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: bond, mitm, io_caps = display)"]; * * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_PASSKEY_DISPLAY {passkey}"]; * APP rbox APP [label="Passkey displayed to the user"]; * |||; * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"]; * |||; * APP rbox CENTRAL [label = "Encrypted with STK"]; * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_MITM}"]; * |||; * SD abox CENTRAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"]; * |||; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS, periph_keys}"]; * APP rbox APP [label = "Store Peripheral Keys"]; * @endmsc * * @defgroup BLE_GAP_SEC_MSC GAP Security Establishment using stored keys * @msc * hscale = "1.5"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "LL Encryption Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_INFO_REQUEST {addr, div}"]; * |||; * --- [label = " Variant #1 App Replies with Keys "]; * |||; * APP rbox APP [label = "Load Peripheral Keys"]; * APP=>SD [label = "sd_ble_gap_sec_info_reply(div, LTK)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "LL Encryption Response", textcolor="#000080", linecolor="#000080"]; * APP rbox CENTRAL [label = "Encrypted with LTK"]; * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE"]; * |||; * --- [label = " Variant #2 App Replies without Keys "]; * |||; * APP=>SD [label = "sd_ble_gap_sec_info_reply(NULL)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "LL Reject Ind: Pin or Key Missing", textcolor="#000080", linecolor="#000080"]; * APP rbox CENTRAL [label = "Link Not Encrypted"]; * @endmsc * * @defgroup BLE_GAP_PERIPH_SEC_MSC GAP Peripheral Initiated Security Establishment * @msc * hscale = "1.5"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * APP=>SD [label = "sd_ble_gap_authenticate(params)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Security Request", textcolor="#000080", linecolor="#000080"]; * |||; * --- [label = " Variant #1 Central initiates Security Establishment "]; * |||; * APP rbox CENTRAL [label="Encryption or Pairing/Bonding initiated by Central"]; * |||; * --- [label = " Variant #2 Central ignores "]; * |||; * ...; * |||; * APP<<=SD [label = "BLE_GAP_EVT_TIMEOUT"]; * |||; * @endmsc * * @defgroup BLE_GAP_PAIRING_KS_OUT_OF_RANGE_MSC GAP Failed Pairing: Keysize out of supported range * This occurs if the min key size offered by the peer is above 16, or max key size below 7. * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: Invalid params, error_src: local}"]; * SD:>CENTRAL [label = "SMP Pairing failed", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GAP_PAIRING_KS_TOO_SMALL_MSC GAP Failed Pairing: Keysize too small * This occurs if the max key size offered by the peer is below the min key size specified by * the app. * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"]; * SD<:CENTRAL [label = "SMP Pairing Confirm", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: Enc key size, error_src: local}"]; * SD:>CENTRAL [label = "SMP Pairing failed", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GAP_PAIRING_APP_ERROR_MSC GAP Failed Pairing: Pairing aborted by the application * When the application detects that the pairing should not be performed, for example an * insufficient IO combination, it can use sd_ble_gap_sec_params_reply() to send * SMP Pairing failed to the peer. * * When the stack handles the response from the application it will also validate * the passkey (SMP_STC_PASSKEY_ENTRY_FAILED). If any error is detected it will be * reported when sd_ble_gap_sec_params_reply() is called. * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST"]; * SD abox APP [label="Stack looks for errors", textbgcolor="#7f7fff"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(<code from application>)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing failed", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: <code from application>, error_src: local}"]; * @endmsc * * @defgroup BLE_GAP_PAIRING_CONFIRM_FAIL_MSC GAP Failed Pairing: Confirm failed * This occurs if the random value doesn't match, usually because the user entered a wrong pin * or out of band data was missing. * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: mitm, display}"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: mitm, keyboard)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"]; * SD<:CENTRAL [label = "SMP Pairing Confirm", textcolor="#000080", linecolor="#000080"]; * SD:>CENTRAL [label = "SMP Pairing Confirm", textcolor="#000080", linecolor="#000080"]; * SD<:CENTRAL [label = "SMP Pairing Random", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: Confirm value, error_src: local}"]; * SD:>CENTRAL [label = "SMP Pairing failed", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GAP_PAIRING_REMOTE_PAIRING_FAIL_MSC GAP Failed Pairing: Pairing failed from master * SMP Pairing Failed may be sent from the master at various times. The application should * prepare for this and gracefully handle the event. * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"]; * SD<:CENTRAL [label = "SMP Pairing Failed", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: <remote_reason>, error_src: remote}"]; * @endmsc * * @defgroup BLE_GAP_PAIRING_TIMEOUT_MSC GAP Failed Pairing: Timeout * This occurs if the central device doesn't continue the pairing sequence within 30 seconds. * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST"]; * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"]; * --- [ label = "Wait 30 sec" ]; * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: Timeout, error_src: local}"]; * @endmsc * * @defgroup BLE_GAP_SECURITY_TIMEOUT_MSC GAP Authenticate request: Timeout * This occurs if the central device doesn't continue the pairing sequence after * the security procedure timeout. * @msc * hscale = "2"; * APP,SD,CENTRAL; * |||; * APP rbox CENTRAL [label="Connection Established"]; * |||; * APP=>SD [label = "sd_ble_gap_authenticate(..., ble_gap_sec_params_t*)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>CENTRAL [label = "Security Request", textcolor="#000080", linecolor="#000080"]; --- [ label = "After req_timeout (in ble_gap_sec_params_t)" ]; * APP<<=SD [label = "BLE_GAP_EVT_TIMEOUT {error_src: BLE_GAP_TIMEOUT_SRC_SECURITY_REQUEST}"]; * @endmsc * * @} * @} */ /** * @addtogroup BLE_GATTC * @{ * @defgroup BLE_GATTC_MSC Message Sequence Charts * @{ * @defgroup BLE_GATTC_PRIM_SRVC_DISC_MSC GATTC Primary Service Discovery * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * --- [label = " Variant #1 Discover All Services "]; * |||; * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle, NULL)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Group Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read By Group Type Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {SUCCESS, services}"]; * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle + N, NULL)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Group Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read By Group Type Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {SUCCESS, services}"]; * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle + N + M, NULL)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Group Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {ATTRIBUTE_NOT_FOUND}"]; * |||; * --- [label = " Variant #2 Discover a Specific Service "]; * |||; * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle, uuid)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Find By Type Value Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Find By Type Value Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {SUCCESS, services}"]; * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle + N, uuid)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Find By Type Value Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Find By Type Value Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {SUCCESS, services}"]; * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle + N + M, uuid)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Find By Type Value Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {ATTRIBUTE_NOT_FOUND}"]; * @endmsc * * @defgroup BLE_GATTC_REL_DISC_MSC GATTC Relationship Discovery * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP=>SD [label = "sd_ble_gattc_relationships_discover(handle_range)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_REL_DISC_RSP {SUCCESS, includes}"]; * APP=>SD [label = "sd_ble_gattc_relationships_discover(handle_range + N)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_REL_DISC_RSP {SUCCESS, includes}"]; * APP=>SD [label = "sd_ble_gattc_relationships_discover(handle_range + N + M)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_REL_DISC_RSP {ATTRIBUTE_NOT_FOUND}"]; * @endmsc * * @defgroup BLE_GATTC_CHAR_DISC_MSC GATTC Characteristic Discovery * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP=>SD [label = "sd_ble_gattc_characteristics_discover(handle_range)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_DISC_RSP {SUCCESS, chars}"]; * APP=>SD [label = "sd_ble_gattc_characteristics_discover(handle_range + N)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_DISC_RSP {SUCCESS, chars}"]; * APP=>SD [label = "sd_ble_gattc_characteristics_discover(handle_range + N + M)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_DISC_RSP {ATTRIBUTE_NOT_FOUND}"]; * @endmsc * * @defgroup BLE_GATTC_DESC_DISC_MSC GATTC Descriptor Discovery * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP=>SD [label = "sd_ble_gattc_descriptors_discover(handle_range)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Find Information Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Find Information Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_DESC_DISC_RSP {SUCCESS, descs}"]; * APP=>SD [label = "sd_ble_gattc_descriptors_discover(handle_range + N)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Find Information Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Find Information Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_DESC_DISC_RSP {SUCCESS, descs}"]; * APP=>SD [label = "sd_ble_gattc_descriptors_discover(handle_range + N + M)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Find Information Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_DESC_DISC_RSP {ATTRIBUTE_NOT_FOUND}"]; * @endmsc * * @defgroup BLE_GATTC_READ_UUID_MSC GATTC Read Characteristic Value by UUID * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP=>SD [label = "sd_ble_gattc_char_value_by_uuid_read(uuid, handle_range)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP {SUCCESS, char_values}"]; * APP=>SD [label = "sd_ble_gattc_char_value_by_uuid_read(uuid, handle_range + N)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP {SUCCESS, char_values}"]; * APP=>SD [label = "sd_ble_gattc_char_value_by_uuid_read(uuid, handle_range + N + M)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP {ATTRIBUTE_NOT_FOUND}"]; * @endmsc * * @defgroup BLE_GATTC_VALUE_READ_MSC GATTC Characteristic or Descriptor Value Read * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * --- [label = " Variant #1 offset == 0 "]; * |||; * APP=>SD [label = "sd_ble_gattc_read(handle, 0)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_READ_RSP {SUCCESS, value}"]; * |||; * --- [label = " Variant #2 offset != 0 "]; * |||; * APP=>SD [label = "sd_ble_gattc_read(handle, offset)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read Blob Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read Blob Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_READ_RSP {SUCCESS, value}"]; * APP=>SD [label = "sd_ble_gattc_read(handle, offset + N)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read Blob Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read Blob Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_READ_RSP {SUCCESS, value}"]; * APP=>SD [label = "sd_ble_gattc_read(handle, offset + N + M + 1)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read Blob Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Error Response: Invalid Offset", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_READ_RSP {INVALID_OFFSET}"]; * @endmsc * * @defgroup BLE_GATTC_READ_MULT_MSC GATTC Read Multiple Characteristic Values * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * --- [label = " Variant #1 Successful request "]; * |||; * APP=>SD [label = "sd_ble_gattc_char_values_read(handles)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read Multiple Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Read Multiple Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VALS_READ_RSP {SUCCESS, char_values}"]; * |||; * --- [label = " Variant #2 Failing request (invalid handle) "]; * |||; * APP=>SD [label = "sd_ble_gattc_char_values_read(handles)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read Multiple Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Error Response: Invalid Handle", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VALS_READ_RSP {INVALID_HANDLE, error_handle=<invalid handle>}"]; * @endmsc * * @defgroup BLE_GATTC_VALUE_WRITE_MSC GATTC Characteristic or Descriptor Value Write * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * --- [label = " Variant #1 write_op == BLE_GATT_OP_WRITE_CMD "]; * |||; * APP=>SD [label = "sd_ble_gattc_write(handle, value)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Write Command", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_TX_COMPLETE"]; * |||; * --- [label = " Variant #2 write_op == BLE_GATT_OP_WRITE_REQ "]; * |||; * APP=>SD [label = "sd_ble_gattc_write(handle, value)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Write Request", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Write Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {SUCCESS}"]; * @endmsc * * @defgroup BLE_GATTC_HVI_MSC GATTC Handle Value Indication * <b> GATTC Handle Value Indication MSC </b> * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD<:PEER [label = "ATT Handle Value Indication", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_HVX {INDICATION, data}"]; * APP=>SD [label = "sd_ble_gattc_hv_confirm(handle)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Handle Value Confirmation", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GATTC_HVN_MSC GATTC Handle Value Notification * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD<:PEER [label = "ATT Handle Value Notification", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTC_EVT_HVX {NOTIFICATION, data}"]; * @endmsc * * @defgroup BLE_GATTC_TIMEOUT_MSC GATTC Timeout * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP rbox PEER [label="Any GATTC API used"]; * SD:>PEER [label = "ATT Packet", textcolor="#000080", linecolor="#000080"]; * APP note PEER [label = "No Response from Peer"]; * |||; * ...; * |||; * SD box SD [label="Timeout"]; * APP<<=SD [label = "BLE_GATTC_EVT_TIMEOUT {source}"]; * APP rbox PEER [label="No additional ATT Traffic Allowed", textbgcolour="#ff7f7f"]; * APP=>SD [label = "Any API call"]; * APP<<SD [label = "NRF_ERROR_BUSY"]; * @endmsc * @} * @} */ /** * @addtogroup BLE_GATTS * @{ * @defgroup BLE_GATTS_MSC Message Sequence Charts * @{ * @defgroup BLE_GATTS_ATT_TABLE_POP_MSC GATTS ATT Table Population * @msc * hscale = "1.5"; * APP,SD; * |||; * APP=>SD [label = "sd_ble_gatts_service_add(uuid#1)"]; * APP<<SD [label = "{NRF_SUCCESS, handle_srvc#1}"]; * APP=>SD [label = "sd_ble_gatts_characteristic_add(handle_srvc#1, char_md, value)"]; * APP<<SD [label = "{NRF_SUCCESS, handle_char#1, ...}"]; * APP=>SD [label = "sd_ble_gatts_descriptor_add(handle_char#1, value)"]; * APP<<SD [label = "{NRF_SUCCESS, handle_desc#1}"]; * APP=>SD [label = "sd_ble_gatts_descriptor_add(handle_char#1, value)"]; * APP<<SD [label = "{NRF_SUCCESS, handle_desc#2}"]; * APP=>SD [label = "sd_ble_gatts_characteristic_add(handle_srvc#1, char_md, value)"]; * APP<<SD [label = "{NRF_SUCCESS, handle_char#2, ...}"]; * APP=>SD [label = "sd_ble_gatts_descriptor_add(handle_char#2, value)"]; * APP<<SD [label = "{NRF_SUCCESS, handle_desc#3}"]; * APP=>SD [label = "sd_ble_gatts_service_add(uuid#2)"]; * APP<<SD [label = "{NRF_SUCCESS, handle_srvc#2}"]; * APP=>SD [label = "sd_ble_gatts_include_add(handle_srvc#2, handle_srvc#1)"]; * APP<<SD [label = "{NRF_SUCCESS, handle_inc#1}"]; * |||; * ...; * |||; * @endmsc * * @defgroup BLE_GATTS_READ_REQ_NO_AUTH_MSC Read Request without Authorization * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD<:PEER [label = "ATT Read Request", textcolor="#000080", linecolor="#000080"]; * SD:>PEER [label = "ATT Read Response", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GATTS_WRITE_REQ_NO_AUTH_MSC GATTS Write Request without Authorization * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD<:PEER [label = "ATT Write Request", textcolor="#000080", linecolor="#000080"]; * SD:>PEER [label = "ATT Write Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {WRITE_REQ, data}"]; * @endmsc * * @defgroup BLE_GATTS_WRITE_CMD_NO_AUTH_MSC GATTS Write Command with or without Authorization * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD<:PEER [label = "ATT Write Command", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {WRITE_CMD, data}"]; * @endmsc * * @defgroup BLE_GATTS_READ_REQ_AUTH_MSC GATTS Read Request with Authorization * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD rbox SD [label="Value in ATT Table: current_value"]; * SD<:PEER [label = "ATT Read Request", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {READ, current_value}"]; * --- [label = " Variant #1 App Authorizes "]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(SUCCESS, app_value)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD rbox SD [label="Value in ATT Table: app_value"]; * SD:>PEER [label = "ATT Read Response {app_value}", textcolor="#000080", linecolor="#000080"]; * --- [label = " Variant #2 App Disallows "]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(READ_NOT_PERMITTED)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Error Response", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GATTS_WRITE_REQ_AUTH_MSC GATTS Write Request with Authorization * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD rbox SD [label="Value in ATT Table: current_value"]; * SD<:PEER [label = "ATT Write Request {peer_data}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, peer_value}"]; * --- [label = " Variant #1 App Authorizes "]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(SUCCESS)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD rbox SD [label="Value in ATT Table: peer_data"]; * SD:>PEER [label = "ATT Write Response", textcolor="#000080", linecolor="#000080"]; * --- [label = " Variant #2 App Disallows "]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE_NOT_PERMITTED)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Error Response", textcolor="#000080", linecolor="#000080"]; * SD rbox SD [label="Value in ATT Table: current_value"]; * @endmsc * * @defgroup BLE_GATTS_QUEUED_WRITE_BUF_NOAUTH_MSC GATTS Queued Writes: Stack handled, no attributes require authorization * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"]; * APP=>SD [label = "sd_ble_user_mem_reply {user_mem_block}"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * |||; * --- [label = " Variant #1 Attribute Values validation passed "]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"]; * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {EXEC_WRITE_REQ_NOW}"]; * APP rbox APP [label="App parses the memory it provided"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"]; * |||; * --- [label = " Variant #2 Attribute Values validation failed "]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD:>PEER [label = "ATT Error Response {Invalid Value Length / Offset}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"]; * |||; * --- [label = " Variant #3 Peer cancels operation "]; * SD<:PEER [label = "ATT Execute Write Request {CANCEL}", textcolor="#000080", linecolor="#000080"]; * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"]; * |||; * @endmsc * * @defgroup BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC GATTS Queued Writes: Stack handled, one or more attributes require authorization * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"]; * APP=>SD [label = "sd_ble_user_mem_reply {user_mem_block}"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_2, offset_2, peer_value_2}"]; * |||; * --- [label = " Variant #1 App Authorizes both Prepare Write and Execute Write"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"]; * APP rbox APP [label="App parses the memory it provided"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"]; * |||; * --- [label = " Variant #2 App Disallows Prepare Write and Authorizes Execute Write "]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, INSUF_AUTHORIZATION)"]; * SD:>PEER [label = "ATT Error Response {Insufficient Authorization}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"]; * APP rbox APP [label="App parses the memory it provided"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: current_value_2"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"]; * |||; * --- [label = " Variant #3 App Authorizes Prepare Write and Disallows Execute Write "]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"]; * APP rbox APP [label="App parses the memory it provided"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, APP_ERROR_CODE)"]; * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD:>PEER [label = "ATT Error Response {APP_ERROR_CODE}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"]; * @endmsc * * @defgroup BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC GATTS Queued Writes: App handled, no attributes require authorization * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"]; * APP=>SD [label = "sd_ble_user_mem_reply {NULL}"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_1, offset_1, peer_value_1}"]; * APP rbox APP [label="App queues {handle_1, offset_1, peer_value_1}"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_2, offset_2, peer_value_2}"]; * APP rbox APP [label="App queues {handle_2, offset_2, peer_value_2}"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"]; * |||; * --- [label = " Variant #1 Attribute values in stack memory (VLOC_STACK), attribute values validation passed "]; * APP=>SD [label = "sd_ble_gatts_value_set {handle_1, offset_1, peer_value_1}"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP=>SD [label = "sd_ble_gatts_value_set {handle_2, offset_2, peer_value_2}"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * |||; * --- [label = " Variant #2 Attribute values in user memory (VLOC_USER), attribute values validation passed "]; * APP rbox APP [label="Application traverses its queue and executes the write operations (memcpy)"]; * APP rbox APP [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * |||; * --- [label = " Variant #3 Attribute values validation failed "]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, INVALID_OFFSET)"]; * APP rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD:>PEER [label = "ATT Error Response {Invalid Offset}", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC GATTS Queued Writes: App handled, one or more attributes require authorization * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP rbox APP [label="Values in ATT Table (in user memory):\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"]; * APP=>SD [label = "sd_ble_user_mem_reply {NULL}"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_1, offset_1, peer_value_1}"]; * APP rbox APP [label="App queues {handle_1, offset_1, peer_value_1}"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_2, offset_2, peer_value_2}"]; * |||; * --- [label = " Variant #1 App Authorizes both Prepare Write and Execute Write"]; * APP rbox APP [label="App queues {handle_2, offset_2, peer_value_2}"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"]; * APP rbox APP [label="Application traverses its queue and executes the write operations (memcpy)"]; * APP rbox APP [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * |||; * --- [label = " Variant #2 App Disallows Prepare Write and Authorizes Execute Write "]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, INSUF_AUTHORIZATION)"]; * SD:>PEER [label = "ATT Error Response {Insufficient Authorization}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"]; * APP rbox APP [label="Application traverses its queue and executes the write operations (memcpy)"]; * APP rbox APP [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: current_value_2"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * |||; * --- [label = " Variant #3 App Authorizes Prepare Write and Disallows Execute Write "]; * APP rbox APP [label="App queues {handle_2, offset_2, peer_value_2}"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, APP_ERROR_CODE)"]; * APP rbox APP [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD:>PEER [label = "ATT Error Response {APP_ERROR_CODE}", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC GATTS Queued Writes: Prepare Queue Full * @msc * hscale = "2"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"]; * |||; * --- [label = " Variant #1 Stack handled "]; * APP=>SD [label = "sd_ble_user_mem_reply {user_mem_block}"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * SD:>PEER [label = "ATT Error Response {Prepare Queue Full}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: current_value_2"]; * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {EXEC_WRITE_REQ_NOW}"]; * APP rbox APP [label="App parses the memory it provided"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"]; * |||; * --- [label = " Variant #2 App handled "]; * APP=>SD [label = "sd_ble_user_mem_reply {NULL}"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_1, offset_1, peer_value_1}"]; * APP rbox APP [label="App queues {handle_1, offset_1, peer_value_1}"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_2, offset_2, peer_value_2}"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, PREPARE_QUEUE_FULL)"]; * SD:>PEER [label = "ATT Error Response {Prepare Queue Full}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"]; * APP=>SD [label = "sd_ble_gatts_value_set {handle_1, offset_1, peer_value_1}"]; * APP<<SD [label = "NRF_SUCCESS"]; * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"]; * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: current_value_2"]; * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GATTS_HVI_MSC GATTS Handle Value Indication * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP rbox PEER [label="Indications Enabled in CCCD"]; * |||; * SD rbox SD [label="Value in ATT Table: current_value"]; * APP=>SD [label = "sd_ble_gatts_hvx(INDICATION, app_value)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD rbox SD [label="Value in ATT Table: app_value"]; * SD:>PEER [label = "ATT Handle Value Indication {app_value}", textcolor="#000080", linecolor="#000080"]; * --- [label = " Variant #1 Peer Confirms "]; * SD<:PEER [label = "ATT Handle Value Confirmation", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_HVC"]; * --- [label = " Variant #2 Peer Ignores "]; * |||; * ...; * |||; * SD box SD [label="Timeout"]; * APP<<=SD [label = "BLE_GATTS_EVT_TIMEOUT"]; * @endmsc * * @defgroup BLE_GATTS_HVN_MSC GATTS Handle Value Notification * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP rbox PEER [label="Notifications Enabled in CCCD"]; * |||; * SD rbox SD [label="Value in ATT Table: current_value"]; * APP=>SD [label = "sd_ble_gatts_hvx(NOTIFICATION, app_value)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD rbox SD [label="Value in ATT Table: app_value"]; * SD:>PEER [label = "ATT Handle Value Notification {app_value}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_TX_COMPLETE"]; * @endmsc * * @defgroup BLE_GATTS_HVX_DISABLED_MSC GATTS Handle Value Indication or Notification disabled * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP rbox PEER [label="Indications and Notifications Disabled in CCCD"]; * |||; * SD rbox SD [label="Value in ATT Table: current_value"]; * APP=>SD [label = "sd_ble_gatts_hvx(INDICATION or NOTIFICATION, app_value)"]; * APP<<SD [label = "NRF_ERROR_INVALID_STATE"]; * SD rbox SD [label="Value in ATT Table: current_value"]; * @endmsc * * @defgroup BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC GATTS Handle Value Indication or Notification with System Attributes Missing * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP rbox PEER [label="System Attributes Uninitialized"]; * |||; * SD rbox SD [label="Value in ATT Table: current_value"]; * APP=>SD [label = "sd_ble_gatts_hvx(INDICATION or NOTIFICATION, app_value)"]; * APP<<SD [label = "BLE_ERROR_GATTS_SYS_ATTR_MISSING"]; * SD rbox SD [label="Value in ATT Table: current_value"]; * APP=>SD [label = "sd_ble_gatts_sys_attr_set()"]; * APP<<SD [label = "NRF_SUCCESS"]; * |||; * ...; * @endmsc * * @defgroup BLE_GATTS_SC_MSC GATTS Service Changed * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox SD [label="Entries added to the ATT Table between handles N and M"]; * |||; * APP rbox PEER [label="Connection Established with a Bonded Peer"]; * |||; * APP=>SD [label = "sd_ble_gatts_service_changed(N, M)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Handle Value Indication {N, M}", textcolor="#000080", linecolor="#000080"]; * SD<:PEER [label = "ATT Handle Value Confirmation", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_SC_CONFIRM"]; * |||; * SD rbox PEER [label="Service Discovery"]; * @endmsc * * @defgroup BLE_GATTS_SYS_ATTRS_UNK_PEER_MSC GATTS System Attributes Handling: Unknown Peer * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established with an Unknown Peer"]; * |||; * SD<:PEER [label = "ATT Read Request {sys_attr_handle}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_SYS_ATTR_MISSING"]; * APP=>SD [label = "sd_ble_gatts_sys_attr_set(NULL)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read Response {sys_attr_value}", textcolor="#000080", linecolor="#000080"]; * @endmsc * * @defgroup BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC GATTS System Attributes Handling: Bonded Peer * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP rbox PEER [label="Connection Established with a Bonded Peer"]; * |||; * APP rbox PEER [label="ATT Traffic"]; * |||; * APP rbox PEER [label="Connection Terminated"]; * APP<<=SD [label = "BLE_GAP_EVT_DISCONNECTED {reason}"]; * |||; * APP=>SD [label = "sd_ble_gatts_sys_attr_get()"]; * APP<<SD [label = "{NRF_SUCCESS, sys_attr_data}"]; * APP rbox APP [label="Store System Attributes"]; * |||; * APP rbox SD [label="Shut down IC"]; * |||; * APP rbox SD [label="Power up IC"]; * |||; * APP rbox PEER [label="Connection Established with the Bonded Peer"]; * SD<:PEER [label = "ATT Read Request {sys_attr_handle}", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_GATTS_EVT_SYS_ATTR_MISSING"]; * APP rbox APP [label="Load System Attributes"]; * APP=>SD [label = "sd_ble_gatts_sys_attr_set(sys_attr_data)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "ATT Read Response {sys_attr_value}", textcolor="#000080", linecolor="#000080"]; * @endmsc * @} * * @addtogroup BLE_GATTS_QUEUED_WRITES_USER_MEM User memory layout for Queued Writes * @{ * The following table shows the memory layout used by the SoftDevice to queue a Queued Write operation (Prepare Write ATT packet) in user memory: * * <table style="border:1px solid black;border-collapse:collapse;"> * <caption>Queued Write</caption> * <tr> * <th style="border:1px solid black;padding:5px;">Parameter</th> * <th style="border:1px solid black;padding:5px;">Size (octets)</th> * <th style="border:1px solid black;padding:5px;">Description</th> * </tr> * <tr> * <td style="border:1px solid black;padding:5px;">Handle</td> * <td style="border:1px solid black;padding:5px;">2</td> * <td style="border:1px solid black;padding:5px;">Attribute Handle</td> * </tr> * <tr> * <td style="border:1px solid black;padding:5px;">Offset</td> * <td style="border:1px solid black;padding:5px;">2</td> * <td style="border:1px solid black;padding:5px;">Value Offset</td> * </tr> * <tr> * <td style="border:1px solid black;padding:5px;">Length</td> * <td style="border:1px solid black;padding:5px;">2</td> * <td style="border:1px solid black;padding:5px;">Value Length</td> * </tr> * <tr> * <td style="border:1px solid black;padding:5px;">Value</td> * <td style="border:1px solid black;padding:5px;">Length</td> * <td style="border:1px solid black;padding:5px;">Attribute Value</td> * </tr> * </table> * * The application can parse the array of Queued Write instances at any time, but it is recommended to do so whenever an Execute Write ATT packet * has been received over the air. See the GATT Server Queued Writes MSCs for more details. * The array will be terminated by an Queued Write instance with its handle set to @ref BLE_GATT_HANDLE_INVALID. * @} * @} */ /** * @addtogroup BLE_L2CAP * @{ * @defgroup BLE_L2CAP_MSC Message Sequence Charts * @{ * @defgroup BLE_L2CAP_API_MSC L2CAP API * @msc * hscale = "1.5"; * APP,SD,PEER; * |||; * APP=>SD [label = "sd_ble_l2cap_cid_register(cid)"]; * APP<<SD [label = "NRF_SUCCESS"]; * |||; * APP rbox PEER [label="Connection Established"]; * |||; * APP=>SD [label = "sd_ble_l2cap_tx(data)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "L2CAP packet", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_EVT_TX_COMPLETE"]; * SD<:PEER [label = "L2CAP packet", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_L2CAP_EVT_RX"]; * SD<:PEER [label = "L2CAP packet", textcolor="#000080", linecolor="#000080"]; * APP<<=SD [label = "BLE_L2CAP_EVT_RX"]; * |||; * APP=>SD [label = "sd_ble_l2cap_tx(data)"]; * APP<<SD [label = "NRF_SUCCESS"]; * SD:>PEER [label = "L2CAP packet", textcolor="#000080", linecolor="#000080"]; * SD=>>APP [label = "BLE_EVT_TX_COMPLETE"]; * |||; * APP rbox PEER [label="Terminate Connection"]; * |||; * APP=>SD [label = "sd_ble_l2cap_cid_unregister(cid)"]; * APP<<SD [label = "NRF_SUCCESS"]; * @endmsc * @} * @} */