mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/MK64F12/MK64F12_axbs.h
- Committer:
- shaoziyang
- Date:
- 2014-09-13
- Revision:
- 323:9e901b0a5aa1
- Parent:
- 320:be04b2b1e3f2
File content as of revision 323:9e901b0a5aa1:
/* * Copyright (c) 2014, Freescale Semiconductor, Inc. * All rights reserved. * * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. */ /* * WARNING! DO NOT EDIT THIS FILE DIRECTLY! * * This file was generated automatically and any changes may be lost. */ #ifndef __HW_AXBS_REGISTERS_H__ #define __HW_AXBS_REGISTERS_H__ #include "regs.h" /* * MK64F12 AXBS * * Crossbar switch * * Registers defined in this header file: * - HW_AXBS_PRSn - Priority Registers Slave * - HW_AXBS_CRSn - Control Register * - HW_AXBS_MGPCR0 - Master General Purpose Control Register * - HW_AXBS_MGPCR1 - Master General Purpose Control Register * - HW_AXBS_MGPCR2 - Master General Purpose Control Register * - HW_AXBS_MGPCR3 - Master General Purpose Control Register * - HW_AXBS_MGPCR4 - Master General Purpose Control Register * - HW_AXBS_MGPCR5 - Master General Purpose Control Register * * - hw_axbs_t - Struct containing all module registers. */ //! @name Module base addresses //@{ #ifndef REGS_AXBS_BASE #define HW_AXBS_INSTANCE_COUNT (1U) //!< Number of instances of the AXBS module. #define REGS_AXBS_BASE (0x40004000U) //!< Base address for AXBS. #endif //@} //------------------------------------------------------------------------------------------- // HW_AXBS_PRSn - Priority Registers Slave //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AXBS_PRSn - Priority Registers Slave (RW) * * Reset value: 0x00543210U * * The priority registers (PRSn) set the priority of each master port on a per * slave port basis and reside in each slave port. The priority register can be * accessed only with 32-bit accesses. After the CRSn[RO] bit is set, the PRSn * register can only be read; attempts to write to it have no effect on PRSn and * result in a bus-error response to the master initiating the write. Two available * masters must not be programmed with the same priority level. Attempts to * program two or more masters with the same priority level result in a bus-error * response and the PRSn is not updated. Valid values for the Mn priority fields * depend on which masters are available on the chip. This information can be found in * the chip-specific information for the crossbar. If the chip contains less * than five masters, values 0 to 3 are valid. Writing other values will result in * an error. If the chip contains five or more masters, valid values are 0 to n-1, * where n is the number of masters attached to the AXBS module. Other values * will result in an error. */ typedef union _hw_axbs_prsn { uint32_t U; struct _hw_axbs_prsn_bitfields { uint32_t M0 : 3; //!< [2:0] Master 0 Priority. Sets the arbitration //! priority for this port on the associated slave port. uint32_t RESERVED0 : 1; //!< [3] uint32_t M1 : 3; //!< [6:4] Master 1 Priority. Sets the arbitration //! priority for this port on the associated slave port. uint32_t RESERVED1 : 1; //!< [7] uint32_t M2 : 3; //!< [10:8] Master 2 Priority. Sets the arbitration //! priority for this port on the associated slave port. uint32_t RESERVED2 : 1; //!< [11] uint32_t M3 : 3; //!< [14:12] Master 3 Priority. Sets the arbitration //! priority for this port on the associated slave port. uint32_t RESERVED3 : 1; //!< [15] uint32_t M4 : 3; //!< [18:16] Master 4 Priority. Sets the arbitration //! priority for this port on the associated slave port. uint32_t RESERVED4 : 1; //!< [19] uint32_t M5 : 3; //!< [22:20] Master 5 Priority. Sets the arbitration //! priority for this port on the associated slave port. uint32_t RESERVED5 : 9; //!< [31:23] } B; } hw_axbs_prsn_t; #endif /*! * @name Constants and macros for entire AXBS_PRSn register */ //@{ #define HW_AXBS_PRSn_COUNT (5U) #define HW_AXBS_PRSn_ADDR(n) (REGS_AXBS_BASE + 0x0U + (0x100U * n)) #ifndef __LANGUAGE_ASM__ #define HW_AXBS_PRSn(n) (*(__IO hw_axbs_prsn_t *) HW_AXBS_PRSn_ADDR(n)) #define HW_AXBS_PRSn_RD(n) (HW_AXBS_PRSn(n).U) #define HW_AXBS_PRSn_WR(n, v) (HW_AXBS_PRSn(n).U = (v)) #define HW_AXBS_PRSn_SET(n, v) (HW_AXBS_PRSn_WR(n, HW_AXBS_PRSn_RD(n) | (v))) #define HW_AXBS_PRSn_CLR(n, v) (HW_AXBS_PRSn_WR(n, HW_AXBS_PRSn_RD(n) & ~(v))) #define HW_AXBS_PRSn_TOG(n, v) (HW_AXBS_PRSn_WR(n, HW_AXBS_PRSn_RD(n) ^ (v))) #endif //@} /* * Constants & macros for individual AXBS_PRSn bitfields */ /*! * @name Register AXBS_PRSn, field M0[2:0] (RW) * * Values: * - 000 - This master has level 1, or highest, priority when accessing the * slave port. * - 001 - This master has level 2 priority when accessing the slave port. * - 010 - This master has level 3 priority when accessing the slave port. * - 011 - This master has level 4 priority when accessing the slave port. * - 100 - This master has level 5 priority when accessing the slave port. * - 101 - This master has level 6 priority when accessing the slave port. * - 110 - This master has level 7 priority when accessing the slave port. * - 111 - This master has level 8, or lowest, priority when accessing the slave * port. */ //@{ #define BP_AXBS_PRSn_M0 (0U) //!< Bit position for AXBS_PRSn_M0. #define BM_AXBS_PRSn_M0 (0x00000007U) //!< Bit mask for AXBS_PRSn_M0. #define BS_AXBS_PRSn_M0 (3U) //!< Bit field size in bits for AXBS_PRSn_M0. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_PRSn_M0 field. #define BR_AXBS_PRSn_M0(n) (HW_AXBS_PRSn(n).B.M0) #endif //! @brief Format value for bitfield AXBS_PRSn_M0. #define BF_AXBS_PRSn_M0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M0), uint32_t) & BM_AXBS_PRSn_M0) #ifndef __LANGUAGE_ASM__ //! @brief Set the M0 field to a new value. #define BW_AXBS_PRSn_M0(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M0) | BF_AXBS_PRSn_M0(v))) #endif //@} /*! * @name Register AXBS_PRSn, field M1[6:4] (RW) * * Values: * - 000 - This master has level 1, or highest, priority when accessing the * slave port. * - 001 - This master has level 2 priority when accessing the slave port. * - 010 - This master has level 3 priority when accessing the slave port. * - 011 - This master has level 4 priority when accessing the slave port. * - 100 - This master has level 5 priority when accessing the slave port. * - 101 - This master has level 6 priority when accessing the slave port. * - 110 - This master has level 7 priority when accessing the slave port. * - 111 - This master has level 8, or lowest, priority when accessing the slave * port. */ //@{ #define BP_AXBS_PRSn_M1 (4U) //!< Bit position for AXBS_PRSn_M1. #define BM_AXBS_PRSn_M1 (0x00000070U) //!< Bit mask for AXBS_PRSn_M1. #define BS_AXBS_PRSn_M1 (3U) //!< Bit field size in bits for AXBS_PRSn_M1. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_PRSn_M1 field. #define BR_AXBS_PRSn_M1(n) (HW_AXBS_PRSn(n).B.M1) #endif //! @brief Format value for bitfield AXBS_PRSn_M1. #define BF_AXBS_PRSn_M1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M1), uint32_t) & BM_AXBS_PRSn_M1) #ifndef __LANGUAGE_ASM__ //! @brief Set the M1 field to a new value. #define BW_AXBS_PRSn_M1(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M1) | BF_AXBS_PRSn_M1(v))) #endif //@} /*! * @name Register AXBS_PRSn, field M2[10:8] (RW) * * Values: * - 000 - This master has level 1, or highest, priority when accessing the * slave port. * - 001 - This master has level 2 priority when accessing the slave port. * - 010 - This master has level 3 priority when accessing the slave port. * - 011 - This master has level 4 priority when accessing the slave port. * - 100 - This master has level 5 priority when accessing the slave port. * - 101 - This master has level 6 priority when accessing the slave port. * - 110 - This master has level 7 priority when accessing the slave port. * - 111 - This master has level 8, or lowest, priority when accessing the slave * port. */ //@{ #define BP_AXBS_PRSn_M2 (8U) //!< Bit position for AXBS_PRSn_M2. #define BM_AXBS_PRSn_M2 (0x00000700U) //!< Bit mask for AXBS_PRSn_M2. #define BS_AXBS_PRSn_M2 (3U) //!< Bit field size in bits for AXBS_PRSn_M2. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_PRSn_M2 field. #define BR_AXBS_PRSn_M2(n) (HW_AXBS_PRSn(n).B.M2) #endif //! @brief Format value for bitfield AXBS_PRSn_M2. #define BF_AXBS_PRSn_M2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M2), uint32_t) & BM_AXBS_PRSn_M2) #ifndef __LANGUAGE_ASM__ //! @brief Set the M2 field to a new value. #define BW_AXBS_PRSn_M2(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M2) | BF_AXBS_PRSn_M2(v))) #endif //@} /*! * @name Register AXBS_PRSn, field M3[14:12] (RW) * * Values: * - 000 - This master has level 1, or highest, priority when accessing the * slave port. * - 001 - This master has level 2 priority when accessing the slave port. * - 010 - This master has level 3 priority when accessing the slave port. * - 011 - This master has level 4 priority when accessing the slave port. * - 100 - This master has level 5 priority when accessing the slave port. * - 101 - This master has level 6 priority when accessing the slave port. * - 110 - This master has level 7 priority when accessing the slave port. * - 111 - This master has level 8, or lowest, priority when accessing the slave * port. */ //@{ #define BP_AXBS_PRSn_M3 (12U) //!< Bit position for AXBS_PRSn_M3. #define BM_AXBS_PRSn_M3 (0x00007000U) //!< Bit mask for AXBS_PRSn_M3. #define BS_AXBS_PRSn_M3 (3U) //!< Bit field size in bits for AXBS_PRSn_M3. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_PRSn_M3 field. #define BR_AXBS_PRSn_M3(n) (HW_AXBS_PRSn(n).B.M3) #endif //! @brief Format value for bitfield AXBS_PRSn_M3. #define BF_AXBS_PRSn_M3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M3), uint32_t) & BM_AXBS_PRSn_M3) #ifndef __LANGUAGE_ASM__ //! @brief Set the M3 field to a new value. #define BW_AXBS_PRSn_M3(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M3) | BF_AXBS_PRSn_M3(v))) #endif //@} /*! * @name Register AXBS_PRSn, field M4[18:16] (RW) * * Values: * - 000 - This master has level 1, or highest, priority when accessing the * slave port. * - 001 - This master has level 2 priority when accessing the slave port. * - 010 - This master has level 3 priority when accessing the slave port. * - 011 - This master has level 4 priority when accessing the slave port. * - 100 - This master has level 5 priority when accessing the slave port. * - 101 - This master has level 6 priority when accessing the slave port. * - 110 - This master has level 7 priority when accessing the slave port. * - 111 - This master has level 8, or lowest, priority when accessing the slave * port. */ //@{ #define BP_AXBS_PRSn_M4 (16U) //!< Bit position for AXBS_PRSn_M4. #define BM_AXBS_PRSn_M4 (0x00070000U) //!< Bit mask for AXBS_PRSn_M4. #define BS_AXBS_PRSn_M4 (3U) //!< Bit field size in bits for AXBS_PRSn_M4. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_PRSn_M4 field. #define BR_AXBS_PRSn_M4(n) (HW_AXBS_PRSn(n).B.M4) #endif //! @brief Format value for bitfield AXBS_PRSn_M4. #define BF_AXBS_PRSn_M4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M4), uint32_t) & BM_AXBS_PRSn_M4) #ifndef __LANGUAGE_ASM__ //! @brief Set the M4 field to a new value. #define BW_AXBS_PRSn_M4(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M4) | BF_AXBS_PRSn_M4(v))) #endif //@} /*! * @name Register AXBS_PRSn, field M5[22:20] (RW) * * Values: * - 000 - This master has level 1, or highest, priority when accessing the * slave port. * - 001 - This master has level 2 priority when accessing the slave port. * - 010 - This master has level 3 priority when accessing the slave port. * - 011 - This master has level 4 priority when accessing the slave port. * - 100 - This master has level 5 priority when accessing the slave port. * - 101 - This master has level 6 priority when accessing the slave port. * - 110 - This master has level 7 priority when accessing the slave port. * - 111 - This master has level 8, or lowest, priority when accessing the slave * port. */ //@{ #define BP_AXBS_PRSn_M5 (20U) //!< Bit position for AXBS_PRSn_M5. #define BM_AXBS_PRSn_M5 (0x00700000U) //!< Bit mask for AXBS_PRSn_M5. #define BS_AXBS_PRSn_M5 (3U) //!< Bit field size in bits for AXBS_PRSn_M5. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_PRSn_M5 field. #define BR_AXBS_PRSn_M5(n) (HW_AXBS_PRSn(n).B.M5) #endif //! @brief Format value for bitfield AXBS_PRSn_M5. #define BF_AXBS_PRSn_M5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M5), uint32_t) & BM_AXBS_PRSn_M5) #ifndef __LANGUAGE_ASM__ //! @brief Set the M5 field to a new value. #define BW_AXBS_PRSn_M5(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M5) | BF_AXBS_PRSn_M5(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_AXBS_CRSn - Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AXBS_CRSn - Control Register (RW) * * Reset value: 0x00000000U * * These registers control several features of each slave port and must be * accessed using 32-bit accesses. After CRSn[RO] is set, the PRSn can only be read; * attempts to write to it have no effect and result in an error response. */ typedef union _hw_axbs_crsn { uint32_t U; struct _hw_axbs_crsn_bitfields { uint32_t PARK : 3; //!< [2:0] Park uint32_t RESERVED0 : 1; //!< [3] uint32_t PCTL : 2; //!< [5:4] Parking Control uint32_t RESERVED1 : 2; //!< [7:6] uint32_t ARB : 2; //!< [9:8] Arbitration Mode uint32_t RESERVED2 : 20; //!< [29:10] uint32_t HLP : 1; //!< [30] Halt Low Priority uint32_t RO : 1; //!< [31] Read Only } B; } hw_axbs_crsn_t; #endif /*! * @name Constants and macros for entire AXBS_CRSn register */ //@{ #define HW_AXBS_CRSn_COUNT (5U) #define HW_AXBS_CRSn_ADDR(n) (REGS_AXBS_BASE + 0x10U + (0x100U * n)) #ifndef __LANGUAGE_ASM__ #define HW_AXBS_CRSn(n) (*(__IO hw_axbs_crsn_t *) HW_AXBS_CRSn_ADDR(n)) #define HW_AXBS_CRSn_RD(n) (HW_AXBS_CRSn(n).U) #define HW_AXBS_CRSn_WR(n, v) (HW_AXBS_CRSn(n).U = (v)) #define HW_AXBS_CRSn_SET(n, v) (HW_AXBS_CRSn_WR(n, HW_AXBS_CRSn_RD(n) | (v))) #define HW_AXBS_CRSn_CLR(n, v) (HW_AXBS_CRSn_WR(n, HW_AXBS_CRSn_RD(n) & ~(v))) #define HW_AXBS_CRSn_TOG(n, v) (HW_AXBS_CRSn_WR(n, HW_AXBS_CRSn_RD(n) ^ (v))) #endif //@} /* * Constants & macros for individual AXBS_CRSn bitfields */ /*! * @name Register AXBS_CRSn, field PARK[2:0] (RW) * * Determines which master port the current slave port parks on when no masters * are actively making requests and the PCTL bits are cleared. Select only master * ports that are present on the chip. Otherwise, undefined behavior might occur. * * Values: * - 000 - Park on master port M0 * - 001 - Park on master port M1 * - 010 - Park on master port M2 * - 011 - Park on master port M3 * - 100 - Park on master port M4 * - 101 - Park on master port M5 * - 110 - Park on master port M6 * - 111 - Park on master port M7 */ //@{ #define BP_AXBS_CRSn_PARK (0U) //!< Bit position for AXBS_CRSn_PARK. #define BM_AXBS_CRSn_PARK (0x00000007U) //!< Bit mask for AXBS_CRSn_PARK. #define BS_AXBS_CRSn_PARK (3U) //!< Bit field size in bits for AXBS_CRSn_PARK. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_CRSn_PARK field. #define BR_AXBS_CRSn_PARK(n) (HW_AXBS_CRSn(n).B.PARK) #endif //! @brief Format value for bitfield AXBS_CRSn_PARK. #define BF_AXBS_CRSn_PARK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_PARK), uint32_t) & BM_AXBS_CRSn_PARK) #ifndef __LANGUAGE_ASM__ //! @brief Set the PARK field to a new value. #define BW_AXBS_CRSn_PARK(n, v) (HW_AXBS_CRSn_WR(n, (HW_AXBS_CRSn_RD(n) & ~BM_AXBS_CRSn_PARK) | BF_AXBS_CRSn_PARK(v))) #endif //@} /*! * @name Register AXBS_CRSn, field PCTL[5:4] (RW) * * Determines the slave port's parking control. The low-power park feature * results in an overall power savings if the slave port is not saturated. However, * this forces an extra latency clock when any master tries to access the slave * port while not in use because it is not parked on any master. * * Values: * - 00 - When no master makes a request, the arbiter parks the slave port on * the master port defined by the PARK field * - 01 - When no master makes a request, the arbiter parks the slave port on * the last master to be in control of the slave port * - 10 - When no master makes a request, the slave port is not parked on a * master and the arbiter drives all outputs to a constant safe state * - 11 - Reserved */ //@{ #define BP_AXBS_CRSn_PCTL (4U) //!< Bit position for AXBS_CRSn_PCTL. #define BM_AXBS_CRSn_PCTL (0x00000030U) //!< Bit mask for AXBS_CRSn_PCTL. #define BS_AXBS_CRSn_PCTL (2U) //!< Bit field size in bits for AXBS_CRSn_PCTL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_CRSn_PCTL field. #define BR_AXBS_CRSn_PCTL(n) (HW_AXBS_CRSn(n).B.PCTL) #endif //! @brief Format value for bitfield AXBS_CRSn_PCTL. #define BF_AXBS_CRSn_PCTL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_PCTL), uint32_t) & BM_AXBS_CRSn_PCTL) #ifndef __LANGUAGE_ASM__ //! @brief Set the PCTL field to a new value. #define BW_AXBS_CRSn_PCTL(n, v) (HW_AXBS_CRSn_WR(n, (HW_AXBS_CRSn_RD(n) & ~BM_AXBS_CRSn_PCTL) | BF_AXBS_CRSn_PCTL(v))) #endif //@} /*! * @name Register AXBS_CRSn, field ARB[9:8] (RW) * * Selects the arbitration policy for the slave port. * * Values: * - 00 - Fixed priority * - 01 - Round-robin, or rotating, priority * - 10 - Reserved * - 11 - Reserved */ //@{ #define BP_AXBS_CRSn_ARB (8U) //!< Bit position for AXBS_CRSn_ARB. #define BM_AXBS_CRSn_ARB (0x00000300U) //!< Bit mask for AXBS_CRSn_ARB. #define BS_AXBS_CRSn_ARB (2U) //!< Bit field size in bits for AXBS_CRSn_ARB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_CRSn_ARB field. #define BR_AXBS_CRSn_ARB(n) (HW_AXBS_CRSn(n).B.ARB) #endif //! @brief Format value for bitfield AXBS_CRSn_ARB. #define BF_AXBS_CRSn_ARB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_ARB), uint32_t) & BM_AXBS_CRSn_ARB) #ifndef __LANGUAGE_ASM__ //! @brief Set the ARB field to a new value. #define BW_AXBS_CRSn_ARB(n, v) (HW_AXBS_CRSn_WR(n, (HW_AXBS_CRSn_RD(n) & ~BM_AXBS_CRSn_ARB) | BF_AXBS_CRSn_ARB(v))) #endif //@} /*! * @name Register AXBS_CRSn, field HLP[30] (RW) * * Sets the initial arbitration priority for low power mode requests . Setting * this bit will not affect the request for low power mode from attaining highest * priority once it has control of the slave ports. * * Values: * - 0 - The low power mode request has the highest priority for arbitration on * this slave port * - 1 - The low power mode request has the lowest initial priority for * arbitration on this slave port */ //@{ #define BP_AXBS_CRSn_HLP (30U) //!< Bit position for AXBS_CRSn_HLP. #define BM_AXBS_CRSn_HLP (0x40000000U) //!< Bit mask for AXBS_CRSn_HLP. #define BS_AXBS_CRSn_HLP (1U) //!< Bit field size in bits for AXBS_CRSn_HLP. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_CRSn_HLP field. #define BR_AXBS_CRSn_HLP(n) (BITBAND_ACCESS32(HW_AXBS_CRSn_ADDR(n), BP_AXBS_CRSn_HLP)) #endif //! @brief Format value for bitfield AXBS_CRSn_HLP. #define BF_AXBS_CRSn_HLP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_HLP), uint32_t) & BM_AXBS_CRSn_HLP) #ifndef __LANGUAGE_ASM__ //! @brief Set the HLP field to a new value. #define BW_AXBS_CRSn_HLP(n, v) (BITBAND_ACCESS32(HW_AXBS_CRSn_ADDR(n), BP_AXBS_CRSn_HLP) = (v)) #endif //@} /*! * @name Register AXBS_CRSn, field RO[31] (RW) * * Forces the slave port's CSRn and PRSn registers to be read-only. After set, * only a hardware reset clears it. * * Values: * - 0 - The slave port's registers are writeable * - 1 - The slave port's registers are read-only and cannot be written. * Attempted writes have no effect on the registers and result in a bus error * response. */ //@{ #define BP_AXBS_CRSn_RO (31U) //!< Bit position for AXBS_CRSn_RO. #define BM_AXBS_CRSn_RO (0x80000000U) //!< Bit mask for AXBS_CRSn_RO. #define BS_AXBS_CRSn_RO (1U) //!< Bit field size in bits for AXBS_CRSn_RO. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_CRSn_RO field. #define BR_AXBS_CRSn_RO(n) (BITBAND_ACCESS32(HW_AXBS_CRSn_ADDR(n), BP_AXBS_CRSn_RO)) #endif //! @brief Format value for bitfield AXBS_CRSn_RO. #define BF_AXBS_CRSn_RO(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_RO), uint32_t) & BM_AXBS_CRSn_RO) #ifndef __LANGUAGE_ASM__ //! @brief Set the RO field to a new value. #define BW_AXBS_CRSn_RO(n, v) (BITBAND_ACCESS32(HW_AXBS_CRSn_ADDR(n), BP_AXBS_CRSn_RO) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_AXBS_MGPCR0 - Master General Purpose Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AXBS_MGPCR0 - Master General Purpose Control Register (RW) * * Reset value: 0x00000000U * * The MGPCR controls only whether the master's undefined length burst accesses * are allowed to complete uninterrupted or whether they can be broken by * requests from higher priority masters. The MGPCR can be accessed only in Supervisor * mode with 32-bit accesses. */ typedef union _hw_axbs_mgpcr0 { uint32_t U; struct _hw_axbs_mgpcr0_bitfields { uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts uint32_t RESERVED0 : 29; //!< [31:3] } B; } hw_axbs_mgpcr0_t; #endif /*! * @name Constants and macros for entire AXBS_MGPCR0 register */ //@{ #define HW_AXBS_MGPCR0_ADDR (REGS_AXBS_BASE + 0x800U) #ifndef __LANGUAGE_ASM__ #define HW_AXBS_MGPCR0 (*(__IO hw_axbs_mgpcr0_t *) HW_AXBS_MGPCR0_ADDR) #define HW_AXBS_MGPCR0_RD() (HW_AXBS_MGPCR0.U) #define HW_AXBS_MGPCR0_WR(v) (HW_AXBS_MGPCR0.U = (v)) #define HW_AXBS_MGPCR0_SET(v) (HW_AXBS_MGPCR0_WR(HW_AXBS_MGPCR0_RD() | (v))) #define HW_AXBS_MGPCR0_CLR(v) (HW_AXBS_MGPCR0_WR(HW_AXBS_MGPCR0_RD() & ~(v))) #define HW_AXBS_MGPCR0_TOG(v) (HW_AXBS_MGPCR0_WR(HW_AXBS_MGPCR0_RD() ^ (v))) #endif //@} /* * Constants & macros for individual AXBS_MGPCR0 bitfields */ /*! * @name Register AXBS_MGPCR0, field AULB[2:0] (RW) * * Determines whether, and when, the crossbar switch arbitrates away the slave * port the master owns when the master is performing undefined length burst * accesses. * * Values: * - 000 - No arbitration is allowed during an undefined length burst * - 001 - Arbitration is allowed at any time during an undefined length burst * - 010 - Arbitration is allowed after four beats of an undefined length burst * - 011 - Arbitration is allowed after eight beats of an undefined length burst * - 100 - Arbitration is allowed after 16 beats of an undefined length burst * - 101 - Reserved * - 110 - Reserved * - 111 - Reserved */ //@{ #define BP_AXBS_MGPCR0_AULB (0U) //!< Bit position for AXBS_MGPCR0_AULB. #define BM_AXBS_MGPCR0_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR0_AULB. #define BS_AXBS_MGPCR0_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR0_AULB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_MGPCR0_AULB field. #define BR_AXBS_MGPCR0_AULB (HW_AXBS_MGPCR0.B.AULB) #endif //! @brief Format value for bitfield AXBS_MGPCR0_AULB. #define BF_AXBS_MGPCR0_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR0_AULB), uint32_t) & BM_AXBS_MGPCR0_AULB) #ifndef __LANGUAGE_ASM__ //! @brief Set the AULB field to a new value. #define BW_AXBS_MGPCR0_AULB(v) (HW_AXBS_MGPCR0_WR((HW_AXBS_MGPCR0_RD() & ~BM_AXBS_MGPCR0_AULB) | BF_AXBS_MGPCR0_AULB(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_AXBS_MGPCR1 - Master General Purpose Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AXBS_MGPCR1 - Master General Purpose Control Register (RW) * * Reset value: 0x00000000U * * The MGPCR controls only whether the master's undefined length burst accesses * are allowed to complete uninterrupted or whether they can be broken by * requests from higher priority masters. The MGPCR can be accessed only in Supervisor * mode with 32-bit accesses. */ typedef union _hw_axbs_mgpcr1 { uint32_t U; struct _hw_axbs_mgpcr1_bitfields { uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts uint32_t RESERVED0 : 29; //!< [31:3] } B; } hw_axbs_mgpcr1_t; #endif /*! * @name Constants and macros for entire AXBS_MGPCR1 register */ //@{ #define HW_AXBS_MGPCR1_ADDR (REGS_AXBS_BASE + 0x900U) #ifndef __LANGUAGE_ASM__ #define HW_AXBS_MGPCR1 (*(__IO hw_axbs_mgpcr1_t *) HW_AXBS_MGPCR1_ADDR) #define HW_AXBS_MGPCR1_RD() (HW_AXBS_MGPCR1.U) #define HW_AXBS_MGPCR1_WR(v) (HW_AXBS_MGPCR1.U = (v)) #define HW_AXBS_MGPCR1_SET(v) (HW_AXBS_MGPCR1_WR(HW_AXBS_MGPCR1_RD() | (v))) #define HW_AXBS_MGPCR1_CLR(v) (HW_AXBS_MGPCR1_WR(HW_AXBS_MGPCR1_RD() & ~(v))) #define HW_AXBS_MGPCR1_TOG(v) (HW_AXBS_MGPCR1_WR(HW_AXBS_MGPCR1_RD() ^ (v))) #endif //@} /* * Constants & macros for individual AXBS_MGPCR1 bitfields */ /*! * @name Register AXBS_MGPCR1, field AULB[2:0] (RW) * * Determines whether, and when, the crossbar switch arbitrates away the slave * port the master owns when the master is performing undefined length burst * accesses. * * Values: * - 000 - No arbitration is allowed during an undefined length burst * - 001 - Arbitration is allowed at any time during an undefined length burst * - 010 - Arbitration is allowed after four beats of an undefined length burst * - 011 - Arbitration is allowed after eight beats of an undefined length burst * - 100 - Arbitration is allowed after 16 beats of an undefined length burst * - 101 - Reserved * - 110 - Reserved * - 111 - Reserved */ //@{ #define BP_AXBS_MGPCR1_AULB (0U) //!< Bit position for AXBS_MGPCR1_AULB. #define BM_AXBS_MGPCR1_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR1_AULB. #define BS_AXBS_MGPCR1_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR1_AULB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_MGPCR1_AULB field. #define BR_AXBS_MGPCR1_AULB (HW_AXBS_MGPCR1.B.AULB) #endif //! @brief Format value for bitfield AXBS_MGPCR1_AULB. #define BF_AXBS_MGPCR1_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR1_AULB), uint32_t) & BM_AXBS_MGPCR1_AULB) #ifndef __LANGUAGE_ASM__ //! @brief Set the AULB field to a new value. #define BW_AXBS_MGPCR1_AULB(v) (HW_AXBS_MGPCR1_WR((HW_AXBS_MGPCR1_RD() & ~BM_AXBS_MGPCR1_AULB) | BF_AXBS_MGPCR1_AULB(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_AXBS_MGPCR2 - Master General Purpose Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AXBS_MGPCR2 - Master General Purpose Control Register (RW) * * Reset value: 0x00000000U * * The MGPCR controls only whether the master's undefined length burst accesses * are allowed to complete uninterrupted or whether they can be broken by * requests from higher priority masters. The MGPCR can be accessed only in Supervisor * mode with 32-bit accesses. */ typedef union _hw_axbs_mgpcr2 { uint32_t U; struct _hw_axbs_mgpcr2_bitfields { uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts uint32_t RESERVED0 : 29; //!< [31:3] } B; } hw_axbs_mgpcr2_t; #endif /*! * @name Constants and macros for entire AXBS_MGPCR2 register */ //@{ #define HW_AXBS_MGPCR2_ADDR (REGS_AXBS_BASE + 0xA00U) #ifndef __LANGUAGE_ASM__ #define HW_AXBS_MGPCR2 (*(__IO hw_axbs_mgpcr2_t *) HW_AXBS_MGPCR2_ADDR) #define HW_AXBS_MGPCR2_RD() (HW_AXBS_MGPCR2.U) #define HW_AXBS_MGPCR2_WR(v) (HW_AXBS_MGPCR2.U = (v)) #define HW_AXBS_MGPCR2_SET(v) (HW_AXBS_MGPCR2_WR(HW_AXBS_MGPCR2_RD() | (v))) #define HW_AXBS_MGPCR2_CLR(v) (HW_AXBS_MGPCR2_WR(HW_AXBS_MGPCR2_RD() & ~(v))) #define HW_AXBS_MGPCR2_TOG(v) (HW_AXBS_MGPCR2_WR(HW_AXBS_MGPCR2_RD() ^ (v))) #endif //@} /* * Constants & macros for individual AXBS_MGPCR2 bitfields */ /*! * @name Register AXBS_MGPCR2, field AULB[2:0] (RW) * * Determines whether, and when, the crossbar switch arbitrates away the slave * port the master owns when the master is performing undefined length burst * accesses. * * Values: * - 000 - No arbitration is allowed during an undefined length burst * - 001 - Arbitration is allowed at any time during an undefined length burst * - 010 - Arbitration is allowed after four beats of an undefined length burst * - 011 - Arbitration is allowed after eight beats of an undefined length burst * - 100 - Arbitration is allowed after 16 beats of an undefined length burst * - 101 - Reserved * - 110 - Reserved * - 111 - Reserved */ //@{ #define BP_AXBS_MGPCR2_AULB (0U) //!< Bit position for AXBS_MGPCR2_AULB. #define BM_AXBS_MGPCR2_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR2_AULB. #define BS_AXBS_MGPCR2_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR2_AULB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_MGPCR2_AULB field. #define BR_AXBS_MGPCR2_AULB (HW_AXBS_MGPCR2.B.AULB) #endif //! @brief Format value for bitfield AXBS_MGPCR2_AULB. #define BF_AXBS_MGPCR2_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR2_AULB), uint32_t) & BM_AXBS_MGPCR2_AULB) #ifndef __LANGUAGE_ASM__ //! @brief Set the AULB field to a new value. #define BW_AXBS_MGPCR2_AULB(v) (HW_AXBS_MGPCR2_WR((HW_AXBS_MGPCR2_RD() & ~BM_AXBS_MGPCR2_AULB) | BF_AXBS_MGPCR2_AULB(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_AXBS_MGPCR3 - Master General Purpose Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AXBS_MGPCR3 - Master General Purpose Control Register (RW) * * Reset value: 0x00000000U * * The MGPCR controls only whether the master's undefined length burst accesses * are allowed to complete uninterrupted or whether they can be broken by * requests from higher priority masters. The MGPCR can be accessed only in Supervisor * mode with 32-bit accesses. */ typedef union _hw_axbs_mgpcr3 { uint32_t U; struct _hw_axbs_mgpcr3_bitfields { uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts uint32_t RESERVED0 : 29; //!< [31:3] } B; } hw_axbs_mgpcr3_t; #endif /*! * @name Constants and macros for entire AXBS_MGPCR3 register */ //@{ #define HW_AXBS_MGPCR3_ADDR (REGS_AXBS_BASE + 0xB00U) #ifndef __LANGUAGE_ASM__ #define HW_AXBS_MGPCR3 (*(__IO hw_axbs_mgpcr3_t *) HW_AXBS_MGPCR3_ADDR) #define HW_AXBS_MGPCR3_RD() (HW_AXBS_MGPCR3.U) #define HW_AXBS_MGPCR3_WR(v) (HW_AXBS_MGPCR3.U = (v)) #define HW_AXBS_MGPCR3_SET(v) (HW_AXBS_MGPCR3_WR(HW_AXBS_MGPCR3_RD() | (v))) #define HW_AXBS_MGPCR3_CLR(v) (HW_AXBS_MGPCR3_WR(HW_AXBS_MGPCR3_RD() & ~(v))) #define HW_AXBS_MGPCR3_TOG(v) (HW_AXBS_MGPCR3_WR(HW_AXBS_MGPCR3_RD() ^ (v))) #endif //@} /* * Constants & macros for individual AXBS_MGPCR3 bitfields */ /*! * @name Register AXBS_MGPCR3, field AULB[2:0] (RW) * * Determines whether, and when, the crossbar switch arbitrates away the slave * port the master owns when the master is performing undefined length burst * accesses. * * Values: * - 000 - No arbitration is allowed during an undefined length burst * - 001 - Arbitration is allowed at any time during an undefined length burst * - 010 - Arbitration is allowed after four beats of an undefined length burst * - 011 - Arbitration is allowed after eight beats of an undefined length burst * - 100 - Arbitration is allowed after 16 beats of an undefined length burst * - 101 - Reserved * - 110 - Reserved * - 111 - Reserved */ //@{ #define BP_AXBS_MGPCR3_AULB (0U) //!< Bit position for AXBS_MGPCR3_AULB. #define BM_AXBS_MGPCR3_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR3_AULB. #define BS_AXBS_MGPCR3_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR3_AULB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_MGPCR3_AULB field. #define BR_AXBS_MGPCR3_AULB (HW_AXBS_MGPCR3.B.AULB) #endif //! @brief Format value for bitfield AXBS_MGPCR3_AULB. #define BF_AXBS_MGPCR3_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR3_AULB), uint32_t) & BM_AXBS_MGPCR3_AULB) #ifndef __LANGUAGE_ASM__ //! @brief Set the AULB field to a new value. #define BW_AXBS_MGPCR3_AULB(v) (HW_AXBS_MGPCR3_WR((HW_AXBS_MGPCR3_RD() & ~BM_AXBS_MGPCR3_AULB) | BF_AXBS_MGPCR3_AULB(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_AXBS_MGPCR4 - Master General Purpose Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AXBS_MGPCR4 - Master General Purpose Control Register (RW) * * Reset value: 0x00000000U * * The MGPCR controls only whether the master's undefined length burst accesses * are allowed to complete uninterrupted or whether they can be broken by * requests from higher priority masters. The MGPCR can be accessed only in Supervisor * mode with 32-bit accesses. */ typedef union _hw_axbs_mgpcr4 { uint32_t U; struct _hw_axbs_mgpcr4_bitfields { uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts uint32_t RESERVED0 : 29; //!< [31:3] } B; } hw_axbs_mgpcr4_t; #endif /*! * @name Constants and macros for entire AXBS_MGPCR4 register */ //@{ #define HW_AXBS_MGPCR4_ADDR (REGS_AXBS_BASE + 0xC00U) #ifndef __LANGUAGE_ASM__ #define HW_AXBS_MGPCR4 (*(__IO hw_axbs_mgpcr4_t *) HW_AXBS_MGPCR4_ADDR) #define HW_AXBS_MGPCR4_RD() (HW_AXBS_MGPCR4.U) #define HW_AXBS_MGPCR4_WR(v) (HW_AXBS_MGPCR4.U = (v)) #define HW_AXBS_MGPCR4_SET(v) (HW_AXBS_MGPCR4_WR(HW_AXBS_MGPCR4_RD() | (v))) #define HW_AXBS_MGPCR4_CLR(v) (HW_AXBS_MGPCR4_WR(HW_AXBS_MGPCR4_RD() & ~(v))) #define HW_AXBS_MGPCR4_TOG(v) (HW_AXBS_MGPCR4_WR(HW_AXBS_MGPCR4_RD() ^ (v))) #endif //@} /* * Constants & macros for individual AXBS_MGPCR4 bitfields */ /*! * @name Register AXBS_MGPCR4, field AULB[2:0] (RW) * * Determines whether, and when, the crossbar switch arbitrates away the slave * port the master owns when the master is performing undefined length burst * accesses. * * Values: * - 000 - No arbitration is allowed during an undefined length burst * - 001 - Arbitration is allowed at any time during an undefined length burst * - 010 - Arbitration is allowed after four beats of an undefined length burst * - 011 - Arbitration is allowed after eight beats of an undefined length burst * - 100 - Arbitration is allowed after 16 beats of an undefined length burst * - 101 - Reserved * - 110 - Reserved * - 111 - Reserved */ //@{ #define BP_AXBS_MGPCR4_AULB (0U) //!< Bit position for AXBS_MGPCR4_AULB. #define BM_AXBS_MGPCR4_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR4_AULB. #define BS_AXBS_MGPCR4_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR4_AULB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_MGPCR4_AULB field. #define BR_AXBS_MGPCR4_AULB (HW_AXBS_MGPCR4.B.AULB) #endif //! @brief Format value for bitfield AXBS_MGPCR4_AULB. #define BF_AXBS_MGPCR4_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR4_AULB), uint32_t) & BM_AXBS_MGPCR4_AULB) #ifndef __LANGUAGE_ASM__ //! @brief Set the AULB field to a new value. #define BW_AXBS_MGPCR4_AULB(v) (HW_AXBS_MGPCR4_WR((HW_AXBS_MGPCR4_RD() & ~BM_AXBS_MGPCR4_AULB) | BF_AXBS_MGPCR4_AULB(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_AXBS_MGPCR5 - Master General Purpose Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_AXBS_MGPCR5 - Master General Purpose Control Register (RW) * * Reset value: 0x00000000U * * The MGPCR controls only whether the master's undefined length burst accesses * are allowed to complete uninterrupted or whether they can be broken by * requests from higher priority masters. The MGPCR can be accessed only in Supervisor * mode with 32-bit accesses. */ typedef union _hw_axbs_mgpcr5 { uint32_t U; struct _hw_axbs_mgpcr5_bitfields { uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts uint32_t RESERVED0 : 29; //!< [31:3] } B; } hw_axbs_mgpcr5_t; #endif /*! * @name Constants and macros for entire AXBS_MGPCR5 register */ //@{ #define HW_AXBS_MGPCR5_ADDR (REGS_AXBS_BASE + 0xD00U) #ifndef __LANGUAGE_ASM__ #define HW_AXBS_MGPCR5 (*(__IO hw_axbs_mgpcr5_t *) HW_AXBS_MGPCR5_ADDR) #define HW_AXBS_MGPCR5_RD() (HW_AXBS_MGPCR5.U) #define HW_AXBS_MGPCR5_WR(v) (HW_AXBS_MGPCR5.U = (v)) #define HW_AXBS_MGPCR5_SET(v) (HW_AXBS_MGPCR5_WR(HW_AXBS_MGPCR5_RD() | (v))) #define HW_AXBS_MGPCR5_CLR(v) (HW_AXBS_MGPCR5_WR(HW_AXBS_MGPCR5_RD() & ~(v))) #define HW_AXBS_MGPCR5_TOG(v) (HW_AXBS_MGPCR5_WR(HW_AXBS_MGPCR5_RD() ^ (v))) #endif //@} /* * Constants & macros for individual AXBS_MGPCR5 bitfields */ /*! * @name Register AXBS_MGPCR5, field AULB[2:0] (RW) * * Determines whether, and when, the crossbar switch arbitrates away the slave * port the master owns when the master is performing undefined length burst * accesses. * * Values: * - 000 - No arbitration is allowed during an undefined length burst * - 001 - Arbitration is allowed at any time during an undefined length burst * - 010 - Arbitration is allowed after four beats of an undefined length burst * - 011 - Arbitration is allowed after eight beats of an undefined length burst * - 100 - Arbitration is allowed after 16 beats of an undefined length burst * - 101 - Reserved * - 110 - Reserved * - 111 - Reserved */ //@{ #define BP_AXBS_MGPCR5_AULB (0U) //!< Bit position for AXBS_MGPCR5_AULB. #define BM_AXBS_MGPCR5_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR5_AULB. #define BS_AXBS_MGPCR5_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR5_AULB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the AXBS_MGPCR5_AULB field. #define BR_AXBS_MGPCR5_AULB (HW_AXBS_MGPCR5.B.AULB) #endif //! @brief Format value for bitfield AXBS_MGPCR5_AULB. #define BF_AXBS_MGPCR5_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR5_AULB), uint32_t) & BM_AXBS_MGPCR5_AULB) #ifndef __LANGUAGE_ASM__ //! @brief Set the AULB field to a new value. #define BW_AXBS_MGPCR5_AULB(v) (HW_AXBS_MGPCR5_WR((HW_AXBS_MGPCR5_RD() & ~BM_AXBS_MGPCR5_AULB) | BF_AXBS_MGPCR5_AULB(v))) #endif //@} //------------------------------------------------------------------------------------------- // hw_axbs_t - module struct //------------------------------------------------------------------------------------------- /*! * @brief All AXBS module registers. */ #ifndef __LANGUAGE_ASM__ #pragma pack(1) typedef struct _hw_axbs { struct { __IO hw_axbs_prsn_t PRSn; //!< [0x0] Priority Registers Slave uint8_t _reserved0[12]; __IO hw_axbs_crsn_t CRSn; //!< [0x10] Control Register uint8_t _reserved1[236]; } SLAVE[5]; uint8_t _reserved0[768]; __IO hw_axbs_mgpcr0_t MGPCR0; //!< [0x800] Master General Purpose Control Register uint8_t _reserved1[252]; __IO hw_axbs_mgpcr1_t MGPCR1; //!< [0x900] Master General Purpose Control Register uint8_t _reserved2[252]; __IO hw_axbs_mgpcr2_t MGPCR2; //!< [0xA00] Master General Purpose Control Register uint8_t _reserved3[252]; __IO hw_axbs_mgpcr3_t MGPCR3; //!< [0xB00] Master General Purpose Control Register uint8_t _reserved4[252]; __IO hw_axbs_mgpcr4_t MGPCR4; //!< [0xC00] Master General Purpose Control Register uint8_t _reserved5[252]; __IO hw_axbs_mgpcr5_t MGPCR5; //!< [0xD00] Master General Purpose Control Register } hw_axbs_t; #pragma pack() //! @brief Macro to access all AXBS registers. //! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, //! use the '&' operator, like <code>&HW_AXBS</code>. #define HW_AXBS (*(hw_axbs_t *) REGS_AXBS_BASE) #endif #endif // __HW_AXBS_REGISTERS_H__ // v22/130726/0.9 // EOF