mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_L053R8/stm32l0xx_hal_lcd.h
- Committer:
- shaoziyang
- Date:
- 2014-09-13
- Revision:
- 323:9e901b0a5aa1
- Parent:
- 181:a4cbdfbbd2f4
File content as of revision 323:9e901b0a5aa1:
/** ****************************************************************************** * @file stm32l0xx_hal_lcd.h * @author MCD Application Team * @version V1.0.0 * @date 22-April-2014 * @brief Header file of LCD Controller HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L0xx_HAL_LCD_H #define __STM32L0xx_HAL_LCD_H #ifdef __cplusplus extern "C" { #endif #if !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L062xx) && !defined (STM32L061xx) /* Includes ------------------------------------------------------------------*/ #include "stm32l0xx_hal_def.h" /** @addtogroup STM32L0xx_HAL_Driver * @{ */ /** @addtogroup LCD * @{ */ /* Exported types ------------------------------------------------------------*/ /** * @brief LCD Init structure definition */ typedef struct { uint32_t Prescaler; /*!< Configures the LCD Prescaler. This parameter can be one value of @ref LCD_Prescaler */ uint32_t Divider; /*!< Configures the LCD Divider. This parameter can be one value of @ref LCD_Divider */ uint32_t Duty; /*!< Configures the LCD Duty. This parameter can be one value of @ref LCD_Duty */ uint32_t Bias; /*!< Configures the LCD Bias. This parameter can be one value of @ref LCD_Bias */ uint32_t VoltageSource; /*!< Selects the LCD Voltage source. This parameter can be one value of @ref LCD_Voltage_Source */ uint32_t Contrast; /*!< Configures the LCD Contrast. This parameter can be one value of @ref LCD_Contrast */ uint32_t DeadTime; /*!< Configures the LCD Dead Time. This parameter can be one value of @ref LCD_DeadTime */ uint32_t PulseOnDuration; /*!< Configures the LCD Pulse On Duration. This parameter can be one value of @ref LCD_PulseOnDuration */ uint32_t HighDrive; /*!< Enable or disable the low resistance divider. This parameter can be set to ENABLE or DISABLE. */ uint32_t BlinkMode; /*!< Configures the LCD Blink Mode. This parameter can be one value of @ref LCD_BlinkMode */ uint32_t BlinkFrequency; /*!< Configures the LCD Blink frequency. This parameter can be one value of @ref LCD_BlinkFrequency */ }LCD_InitTypeDef; /** * @brief HAL LCD State structures definition */ typedef enum { HAL_LCD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ HAL_LCD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ HAL_LCD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ HAL_LCD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ HAL_LCD_STATE_ERROR = 0x04 /*!< Error */ }HAL_LCD_StateTypeDef; /** * @brief HAL LCD Error Code structure definition */ typedef enum { HAL_LCD_ERROR_NONE = 0x00, /*!< No error */ HAL_LCD_ERROR_FCRSF = 0x01, /*!< Synchro flag timeout error */ HAL_LCD_ERROR_UDR = 0x02, /*!< Update display request flag timeout error */ HAL_LCD_ERROR_UDD = 0x04, /*!< Update display done flag timeout error */ HAL_LCD_ERROR_ENS = 0x08, /*!< LCD enabled status flag timeout error */ HAL_LCD_ERROR_RDY = 0x10 /*!< LCD Booster ready timeout error */ }HAL_LCD_ErrorTypeDef; /** * @brief UART handle Structure definition */ typedef struct { LCD_TypeDef *Instance; /* LCD registers base address */ LCD_InitTypeDef Init; /* LCD communication parameters */ HAL_LockTypeDef Lock; /* Locking object */ __IO HAL_LCD_StateTypeDef State; /* LCD communication state */ __IO HAL_LCD_ErrorTypeDef ErrorCode; /* LCD Error code */ }LCD_HandleTypeDef; /* Exported constants --------------------------------------------------------*/ /** @defgroup LCD_Exported_Constants * @{ */ #define IS_LCD_ALL_INSTANCE(INSTANCE) ((INSTANCE) == LCD) /** @defgroup LCD_Prescaler * @{ */ #define LCD_PRESCALER_1 ((uint32_t)0x00000000) /*!< CLKPS = LCDCLK */ #define LCD_PRESCALER_2 ((uint32_t)0x00400000) /*!< CLKPS = LCDCLK/2 */ #define LCD_PRESCALER_4 ((uint32_t)0x00800000) /*!< CLKPS = LCDCLK/4 */ #define LCD_PRESCALER_8 ((uint32_t)0x00C00000) /*!< CLKPS = LCDCLK/8 */ #define LCD_PRESCALER_16 ((uint32_t)0x01000000) /*!< CLKPS = LCDCLK/16 */ #define LCD_PRESCALER_32 ((uint32_t)0x01400000) /*!< CLKPS = LCDCLK/32 */ #define LCD_PRESCALER_64 ((uint32_t)0x01800000) /*!< CLKPS = LCDCLK/64 */ #define LCD_PRESCALER_128 ((uint32_t)0x01C00000) /*!< CLKPS = LCDCLK/128 */ #define LCD_PRESCALER_256 ((uint32_t)0x02000000) /*!< CLKPS = LCDCLK/256 */ #define LCD_PRESCALER_512 ((uint32_t)0x02400000) /*!< CLKPS = LCDCLK/512 */ #define LCD_PRESCALER_1024 ((uint32_t)0x02800000) /*!< CLKPS = LCDCLK/1024 */ #define LCD_PRESCALER_2048 ((uint32_t)0x02C00000) /*!< CLKPS = LCDCLK/2048 */ #define LCD_PRESCALER_4096 ((uint32_t)0x03000000) /*!< CLKPS = LCDCLK/4096 */ #define LCD_PRESCALER_8192 ((uint32_t)0x03400000) /*!< CLKPS = LCDCLK/8192 */ #define LCD_PRESCALER_16384 ((uint32_t)0x03800000) /*!< CLKPS = LCDCLK/16384 */ #define LCD_PRESCALER_32768 ((uint32_t)0x03C00000) /*!< CLKPS = LCDCLK/32768 */ #define IS_LCD_PRESCALER(PRESCALER) (((PRESCALER) == LCD_PRESCALER_1) || \ ((PRESCALER) == LCD_PRESCALER_2) || \ ((PRESCALER) == LCD_PRESCALER_4) || \ ((PRESCALER) == LCD_PRESCALER_8) || \ ((PRESCALER) == LCD_PRESCALER_16) || \ ((PRESCALER) == LCD_PRESCALER_32) || \ ((PRESCALER) == LCD_PRESCALER_64) || \ ((PRESCALER) == LCD_PRESCALER_128) || \ ((PRESCALER) == LCD_PRESCALER_256) || \ ((PRESCALER) == LCD_PRESCALER_512) || \ ((PRESCALER) == LCD_PRESCALER_1024) || \ ((PRESCALER) == LCD_PRESCALER_2048) || \ ((PRESCALER) == LCD_PRESCALER_4096) || \ ((PRESCALER) == LCD_PRESCALER_8192) || \ ((PRESCALER) == LCD_PRESCALER_16384) || \ ((PRESCALER) == LCD_PRESCALER_32768)) /** * @} */ /** @defgroup LCD_Divider * @{ */ #define LCD_DIVIDER_16 ((uint32_t)0x00000000) /*!< LCD frequency = CLKPS/16 */ #define LCD_DIVIDER_17 ((uint32_t)0x00040000) /*!< LCD frequency = CLKPS/17 */ #define LCD_DIVIDER_18 ((uint32_t)0x00080000) /*!< LCD frequency = CLKPS/18 */ #define LCD_DIVIDER_19 ((uint32_t)0x000C0000) /*!< LCD frequency = CLKPS/19 */ #define LCD_DIVIDER_20 ((uint32_t)0x00100000) /*!< LCD frequency = CLKPS/20 */ #define LCD_DIVIDER_21 ((uint32_t)0x00140000) /*!< LCD frequency = CLKPS/21 */ #define LCD_DIVIDER_22 ((uint32_t)0x00180000) /*!< LCD frequency = CLKPS/22 */ #define LCD_DIVIDER_23 ((uint32_t)0x001C0000) /*!< LCD frequency = CLKPS/23 */ #define LCD_DIVIDER_24 ((uint32_t)0x00200000) /*!< LCD frequency = CLKPS/24 */ #define LCD_DIVIDER_25 ((uint32_t)0x00240000) /*!< LCD frequency = CLKPS/25 */ #define LCD_DIVIDER_26 ((uint32_t)0x00280000) /*!< LCD frequency = CLKPS/26 */ #define LCD_DIVIDER_27 ((uint32_t)0x002C0000) /*!< LCD frequency = CLKPS/27 */ #define LCD_DIVIDER_28 ((uint32_t)0x00300000) /*!< LCD frequency = CLKPS/28 */ #define LCD_DIVIDER_29 ((uint32_t)0x00340000) /*!< LCD frequency = CLKPS/29 */ #define LCD_DIVIDER_30 ((uint32_t)0x00380000) /*!< LCD frequency = CLKPS/30 */ #define LCD_DIVIDER_31 ((uint32_t)0x003C0000) /*!< LCD frequency = CLKPS/31 */ #define IS_LCD_DIVIDER(DIVIDER) (((DIVIDER) == LCD_DIVIDER_16) || \ ((DIVIDER) == LCD_DIVIDER_17) || \ ((DIVIDER) == LCD_DIVIDER_18) || \ ((DIVIDER) == LCD_DIVIDER_19) || \ ((DIVIDER) == LCD_DIVIDER_20) || \ ((DIVIDER) == LCD_DIVIDER_21) || \ ((DIVIDER) == LCD_DIVIDER_22) || \ ((DIVIDER) == LCD_DIVIDER_23) || \ ((DIVIDER) == LCD_DIVIDER_24) || \ ((DIVIDER) == LCD_DIVIDER_25) || \ ((DIVIDER) == LCD_DIVIDER_26) || \ ((DIVIDER) == LCD_DIVIDER_27) || \ ((DIVIDER) == LCD_DIVIDER_28) || \ ((DIVIDER) == LCD_DIVIDER_29) || \ ((DIVIDER) == LCD_DIVIDER_30) || \ ((DIVIDER) == LCD_DIVIDER_31)) /** * @} */ /** @defgroup LCD_Duty * @{ */ #define LCD_DUTY_STATIC ((uint32_t)0x00000000) /*!< Static duty */ #define LCD_DUTY_1_2 ((uint32_t)0x00000004) /*!< 1/2 duty */ #define LCD_DUTY_1_3 ((uint32_t)0x00000008) /*!< 1/3 duty */ #define LCD_DUTY_1_4 ((uint32_t)0x0000000C) /*!< 1/4 duty */ #define LCD_DUTY_1_8 ((uint32_t)0x00000010) /*!< 1/4 duty */ #define IS_LCD_DUTY(DUTY) (((DUTY) == LCD_DUTY_STATIC) || \ ((DUTY) == LCD_DUTY_1_2) || \ ((DUTY) == LCD_DUTY_1_3) || \ ((DUTY) == LCD_DUTY_1_4) || \ ((DUTY) == LCD_DUTY_1_8)) /** * @} */ /** @defgroup LCD_Bias * @{ */ #define LCD_BIAS_1_4 ((uint32_t)0x00000000) /*!< 1/4 Bias */ #define LCD_BIAS_1_2 LCD_CR_BIAS_0 /*!< 1/2 Bias */ #define LCD_BIAS_1_3 LCD_CR_BIAS_1 /*!< 1/3 Bias */ #define IS_LCD_BIAS(BIAS) (((BIAS) == LCD_BIAS_1_4) || \ ((BIAS) == LCD_BIAS_1_2) || \ ((BIAS) == LCD_BIAS_1_3)) /** * @} */ /** @defgroup LCD_Voltage_Source * @{ */ #define LCD_VOLTAGESOURCE_INTERNAL ((uint32_t)0x00000000) /*!< Internal voltage source for the LCD */ #define LCD_VOLTAGESOURCE_EXTERNAL LCD_CR_VSEL /*!< External voltage source for the LCD */ #define IS_LCD_VOLTAGE_SOURCE(SOURCE) (((SOURCE) == LCD_VOLTAGESOURCE_INTERNAL) || \ ((SOURCE) == LCD_VOLTAGESOURCE_EXTERNAL)) /** * @} */ /** @defgroup LCD_Interrupts * @{ */ #define LCD_IT_SOF LCD_FCR_SOFIE #define LCD_IT_UDD LCD_FCR_UDDIE #define IS_LCD_IT(IT) ((((IT) & (uint32_t)0xFFFFFFF5) == 0x00) && ((IT) != 0x00)) #define IS_LCD_GET_IT(IT) (((IT) == LCD_IT_SOF) || ((IT) == LCD_IT_UDD)) /** * @} */ /** @defgroup LCD_PulseOnDuration * @{ */ #define LCD_PULSEONDURATION_0 ((uint32_t)0x00000000) /*!< Pulse ON duration = 0 pulse */ #define LCD_PULSEONDURATION_1 ((uint32_t)0x00000010) /*!< Pulse ON duration = 1/CK_PS */ #define LCD_PULSEONDURATION_2 ((uint32_t)0x00000020) /*!< Pulse ON duration = 2/CK_PS */ #define LCD_PULSEONDURATION_3 ((uint32_t)0x00000030) /*!< Pulse ON duration = 3/CK_PS */ #define LCD_PULSEONDURATION_4 ((uint32_t)0x00000040) /*!< Pulse ON duration = 4/CK_PS */ #define LCD_PULSEONDURATION_5 ((uint32_t)0x00000050) /*!< Pulse ON duration = 5/CK_PS */ #define LCD_PULSEONDURATION_6 ((uint32_t)0x00000060) /*!< Pulse ON duration = 6/CK_PS */ #define LCD_PULSEONDURATION_7 ((uint32_t)0x00000070) /*!< Pulse ON duration = 7/CK_PS */ #define IS_LCD_PULSE_ON_DURATION(DURATION) (((DURATION) == LCD_PULSEONDURATION_0) || \ ((DURATION) == LCD_PULSEONDURATION_1) || \ ((DURATION) == LCD_PULSEONDURATION_2) || \ ((DURATION) == LCD_PULSEONDURATION_3) || \ ((DURATION) == LCD_PULSEONDURATION_4) || \ ((DURATION) == LCD_PULSEONDURATION_5) || \ ((DURATION) == LCD_PULSEONDURATION_6) || \ ((DURATION) == LCD_PULSEONDURATION_7)) /** * @} */ /** @defgroup LCD_DeadTime * @{ */ #define LCD_DEADTIME_0 ((uint32_t)0x00000000) /*!< No dead Time */ #define LCD_DEADTIME_1 ((uint32_t)0x00000080) /*!< One Phase between different couple of Frame */ #define LCD_DEADTIME_2 ((uint32_t)0x00000100) /*!< Two Phase between different couple of Frame */ #define LCD_DEADTIME_3 ((uint32_t)0x00000180) /*!< Three Phase between different couple of Frame */ #define LCD_DEADTIME_4 ((uint32_t)0x00000200) /*!< Four Phase between different couple of Frame */ #define LCD_DEADTIME_5 ((uint32_t)0x00000280) /*!< Five Phase between different couple of Frame */ #define LCD_DEADTIME_6 ((uint32_t)0x00000300) /*!< Six Phase between different couple of Frame */ #define LCD_DEADTIME_7 ((uint32_t)0x00000380) /*!< Seven Phase between different couple of Frame */ #define IS_LCD_DEAD_TIME(TIME) (((TIME) == LCD_DEADTIME_0) || \ ((TIME) == LCD_DEADTIME_1) || \ ((TIME) == LCD_DEADTIME_2) || \ ((TIME) == LCD_DEADTIME_3) || \ ((TIME) == LCD_DEADTIME_4) || \ ((TIME) == LCD_DEADTIME_5) || \ ((TIME) == LCD_DEADTIME_6) || \ ((TIME) == LCD_DEADTIME_7)) /** * @} */ /** @defgroup LCD_BlinkMode * @{ */ #define LCD_BLINKMODE_OFF ((uint32_t)0x00000000) /*!< Blink disabled */ #define LCD_BLINKMODE_SEG0_COM0 ((uint32_t)0x00010000) /*!< Blink enabled on SEG[0], COM[0] (1 pixel) */ #define LCD_BLINKMODE_SEG0_ALLCOM ((uint32_t)0x00020000) /*!< Blink enabled on SEG[0], all COM (up to 8 pixels according to the programmed duty) */ #define LCD_BLINKMODE_ALLSEG_ALLCOM ((uint32_t)0x00030000) /*!< Blink enabled on all SEG and all COM (all pixels) */ #define IS_LCD_BLINK_MODE(MODE) (((MODE) == LCD_BLINKMODE_OFF) || \ ((MODE) == LCD_BLINKMODE_SEG0_COM0) || \ ((MODE) == LCD_BLINKMODE_SEG0_ALLCOM) || \ ((MODE) == LCD_BLINKMODE_ALLSEG_ALLCOM)) /** * @} */ /** @defgroup LCD_BlinkFrequency * @{ */ #define LCD_BLINKFREQUENCY_DIV8 ((uint32_t)0x00000000) /*!< The Blink frequency = fLCD/8 */ #define LCD_BLINKFREQUENCY_DIV16 ((uint32_t)0x00002000) /*!< The Blink frequency = fLCD/16 */ #define LCD_BLINKFREQUENCY_DIV32 ((uint32_t)0x00004000) /*!< The Blink frequency = fLCD/32 */ #define LCD_BLINKFREQUENCY_DIV64 ((uint32_t)0x00006000) /*!< The Blink frequency = fLCD/64 */ #define LCD_BLINKFREQUENCY_DIV128 ((uint32_t)0x00008000) /*!< The Blink frequency = fLCD/128 */ #define LCD_BLINKFREQUENCY_DIV256 ((uint32_t)0x0000A000) /*!< The Blink frequency = fLCD/256 */ #define LCD_BLINKFREQUENCY_DIV512 ((uint32_t)0x0000C000) /*!< The Blink frequency = fLCD/512 */ #define LCD_BLINKFREQUENCY_DIV1024 ((uint32_t)0x0000E000) /*!< The Blink frequency = fLCD/1024 */ #define IS_LCD_BLINK_FREQUENCY(FREQUENCY) (((FREQUENCY) == LCD_BLINKFREQUENCY_DIV8) || \ ((FREQUENCY) == LCD_BLINKFREQUENCY_DIV16) || \ ((FREQUENCY) == LCD_BLINKFREQUENCY_DIV32) || \ ((FREQUENCY) == LCD_BLINKFREQUENCY_DIV64) || \ ((FREQUENCY) == LCD_BLINKFREQUENCY_DIV128) || \ ((FREQUENCY) == LCD_BLINKFREQUENCY_DIV256) || \ ((FREQUENCY) == LCD_BLINKFREQUENCY_DIV512) || \ ((FREQUENCY) == LCD_BLINKFREQUENCY_DIV1024)) /** * @} */ /** @defgroup LCD_Contrast * @{ */ #define LCD_CONTRASTLEVEL_0 ((uint32_t)0x00000000) /*!< Maximum Voltage = 2.60V */ #define LCD_CONTRASTLEVEL_1 ((uint32_t)0x00000400) /*!< Maximum Voltage = 2.73V */ #define LCD_CONTRASTLEVEL_2 ((uint32_t)0x00000800) /*!< Maximum Voltage = 2.86V */ #define LCD_CONTRASTLEVEL_3 ((uint32_t)0x00000C00) /*!< Maximum Voltage = 2.99V */ #define LCD_CONTRASTLEVEL_4 ((uint32_t)0x00001000) /*!< Maximum Voltage = 3.12V */ #define LCD_CONTRASTLEVEL_5 ((uint32_t)0x00001400) /*!< Maximum Voltage = 3.25V */ #define LCD_CONTRASTLEVEL_6 ((uint32_t)0x00001800) /*!< Maximum Voltage = 3.38V */ #define LCD_CONTRASTLEVEL_7 ((uint32_t)0x00001C00) /*!< Maximum Voltage = 3.51V */ #define IS_LCD_CONTRAST(CONTRAST) (((CONTRAST) == LCD_CONTRASTLEVEL_0) || \ ((CONTRAST) == LCD_CONTRASTLEVEL_1) || \ ((CONTRAST) == LCD_CONTRASTLEVEL_2) || \ ((CONTRAST) == LCD_CONTRASTLEVEL_3) || \ ((CONTRAST) == LCD_CONTRASTLEVEL_4) || \ ((CONTRAST) == LCD_CONTRASTLEVEL_5) || \ ((CONTRAST) == LCD_CONTRASTLEVEL_6) || \ ((CONTRAST) == LCD_CONTRASTLEVEL_7)) /** * @} */ /** @defgroup LCD_Flag * @{ */ #define LCD_FLAG_ENS LCD_SR_ENS #define LCD_FLAG_SOF LCD_SR_SOF #define LCD_FLAG_UDR LCD_SR_UDR #define LCD_FLAG_UDD LCD_SR_UDD #define LCD_FLAG_RDY LCD_SR_RDY #define LCD_FLAG_FCRSF LCD_SR_FCRSR #define IS_LCD_GET_FLAG(FLAG) (((FLAG) == LCD_FLAG_ENS) || ((FLAG) == LCD_FLAG_SOF) || \ ((FLAG) == LCD_FLAG_UDR) || ((FLAG) == LCD_FLAG_UDD) || \ ((FLAG) == LCD_FLAG_RDY) || ((FLAG) == LCD_FLAG_FCRSF)) #define IS_LCD_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF5) == 0x00) && ((FLAG) != 0x00)) /** * @} */ /** @defgroup LCD_RAMRegister * @{ */ #define LCD_RAM_REGISTER0 ((uint32_t)0x00000000) /*!< LCD RAM Register 0 */ #define LCD_RAM_REGISTER1 ((uint32_t)0x00000001) /*!< LCD RAM Register 1 */ #define LCD_RAM_REGISTER2 ((uint32_t)0x00000002) /*!< LCD RAM Register 2 */ #define LCD_RAM_REGISTER3 ((uint32_t)0x00000003) /*!< LCD RAM Register 3 */ #define LCD_RAM_REGISTER4 ((uint32_t)0x00000004) /*!< LCD RAM Register 4 */ #define LCD_RAM_REGISTER5 ((uint32_t)0x00000005) /*!< LCD RAM Register 5 */ #define LCD_RAM_REGISTER6 ((uint32_t)0x00000006) /*!< LCD RAM Register 6 */ #define LCD_RAM_REGISTER7 ((uint32_t)0x00000007) /*!< LCD RAM Register 7 */ #define LCD_RAM_REGISTER8 ((uint32_t)0x00000008) /*!< LCD RAM Register 8 */ #define LCD_RAM_REGISTER9 ((uint32_t)0x00000009) /*!< LCD RAM Register 9 */ #define LCD_RAM_REGISTER10 ((uint32_t)0x0000000A) /*!< LCD RAM Register 10 */ #define LCD_RAM_REGISTER11 ((uint32_t)0x0000000B) /*!< LCD RAM Register 11 */ #define LCD_RAM_REGISTER12 ((uint32_t)0x0000000C) /*!< LCD RAM Register 12 */ #define LCD_RAM_REGISTER13 ((uint32_t)0x0000000D) /*!< LCD RAM Register 13 */ #define LCD_RAM_REGISTER14 ((uint32_t)0x0000000E) /*!< LCD RAM Register 14 */ #define LCD_RAM_REGISTER15 ((uint32_t)0x0000000F) /*!< LCD RAM Register 15 */ #define IS_LCD_RAM_REGISTER(REGISTER) (((REGISTER) == LCD_RAM_REGISTER0) || \ ((REGISTER) == LCD_RAM_REGISTER1) || \ ((REGISTER) == LCD_RAM_REGISTER2) || \ ((REGISTER) == LCD_RAM_REGISTER3) || \ ((REGISTER) == LCD_RAM_REGISTER4) || \ ((REGISTER) == LCD_RAM_REGISTER5) || \ ((REGISTER) == LCD_RAM_REGISTER6) || \ ((REGISTER) == LCD_RAM_REGISTER7) || \ ((REGISTER) == LCD_RAM_REGISTER8) || \ ((REGISTER) == LCD_RAM_REGISTER9) || \ ((REGISTER) == LCD_RAM_REGISTER10) || \ ((REGISTER) == LCD_RAM_REGISTER11) || \ ((REGISTER) == LCD_RAM_REGISTER12) || \ ((REGISTER) == LCD_RAM_REGISTER13) || \ ((REGISTER) == LCD_RAM_REGISTER14) || \ ((REGISTER) == LCD_RAM_REGISTER15)) /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @brief Reset LCD handle state * @param __HANDLE__: specifies the LCD Handle. * @retval None */ #define __HAL_LCD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LCD_STATE_RESET) /** @brief macros to enables or disables the LCD * @param __HANDLE__: specifies the LCD Handle. * @retval None */ #define __HAL_LCD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LCD_CR_LCDEN) #define __HAL_LCD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~LCD_CR_LCDEN) /** @brief Macros to enable or disable the low resistance divider. Displays with high * internal resistance may need a longer drive time to achieve * satisfactory contrast. This function is useful in this case if some * additional power consumption can be tolerated. * @param __HANDLE__: specifies the LCD Handle. * @note When this mode is enabled, the PulseOn Duration (PON) have to be * programmed to 1/CK_PS (LCD_PULSEONDURATION_1). * @retval None */ #define __HAL_LCD_HIGHDRIVER_ENABLE(__HANDLE__) \ do{ \ ((__HANDLE__)->Instance->FCR |= LCD_FCR_HD); \ LCD_WaitForSynchro(__HANDLE__); \ }while(0) #define __HAL_LCD_HIGHDRIVER_DISABLE(__HANDLE__) \ do{ \ ((__HANDLE__)->Instance->FCR &= ~LCD_FCR_HD); \ LCD_WaitForSynchro(__HANDLE__); \ }while(0) /** * @brief Macro to configure the LCD pulses on duration. * @param __HANDLE__: specifies the LCD Handle. * @param __DURATION__: specifies the LCD pulse on duration in terms of * CK_PS (prescaled LCD clock period) pulses. * This parameter can be one of the following values: * @arg LCD_PULSEONDURATION_0: 0 pulse * @arg LCD_PULSEONDURATION_1: Pulse ON duration = 1/CK_PS * @arg LCD_PULSEONDURATION_2: Pulse ON duration = 2/CK_PS * @arg LCD_PULSEONDURATION_3: Pulse ON duration = 3/CK_PS * @arg LCD_PULSEONDURATION_4: Pulse ON duration = 4/CK_PS * @arg LCD_PULSEONDURATION_5: Pulse ON duration = 5/CK_PS * @arg LCD_PULSEONDURATION_6: Pulse ON duration = 6/CK_PS * @arg LCD_PULSEONDURATION_7: Pulse ON duration = 7/CK_PS * @retval None */ #define __HAL_LCD_PULSEONDURATION_CONFIG(__HANDLE__, __DURATION__) \ do{ \ MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_PON, (__DURATION__)); \ LCD_WaitForSynchro(__HANDLE__); \ }while(0) /** * @brief Macro to configure the LCD dead time. * @param __HANDLE__: specifies the LCD Handle. * @param __DEADTIME__: specifies the LCD dead time. * This parameter can be one of the following values: * @arg LCD_DEADTIME_0: No dead Time * @arg LCD_DEADTIME_1: One Phase between different couple of Frame * @arg LCD_DEADTIME_2: Two Phase between different couple of Frame * @arg LCD_DEADTIME_3: Three Phase between different couple of Frame * @arg LCD_DEADTIME_4: Four Phase between different couple of Frame * @arg LCD_DEADTIME_5: Five Phase between different couple of Frame * @arg LCD_DEADTIME_6: Six Phase between different couple of Frame * @arg LCD_DEADTIME_7: Seven Phase between different couple of Frame * @retval None */ #define __HAL_LCD_DEADTIME_CONFIG(__HANDLE__, __DEADTIME__) \ do{ \ MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_DEAD, (__DEADTIME__)); \ LCD_WaitForSynchro(__HANDLE__); \ }while(0) /** * @brief Macro to configure the LCD Contrast. * @param __HANDLE__: specifies the LCD Handle. * @param __CONTRAST__: specifies the LCD Contrast. * This parameter can be one of the following values: * @arg LCD_CONTRASTLEVEL_0: Maximum Voltage = 2.60V * @arg LCD_CONTRASTLEVEL_1: Maximum Voltage = 2.73V * @arg LCD_CONTRASTLEVEL_2: Maximum Voltage = 2.86V * @arg LCD_CONTRASTLEVEL_3: Maximum Voltage = 2.99V * @arg LCD_CONTRASTLEVEL_4: Maximum Voltage = 3.12V * @arg LCD_CONTRASTLEVEL_5: Maximum Voltage = 3.25V * @arg LCD_CONTRASTLEVEL_6: Maximum Voltage = 3.38V * @arg LCD_CONTRASTLEVEL_7: Maximum Voltage = 3.51V * @retval None */ #define __HAL_LCD_CONTRAST_CONFIG(__HANDLE__, __CONTRAST__) \ do{ \ MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_CC, (__CONTRAST__)); \ LCD_WaitForSynchro(__HANDLE__); \ } while(0) /** * @brief Macro to configure the LCD Blink mode and Blink frequency. * @param __HANDLE__: specifies the LCD Handle. * @param __BLINKMODE__: specifies the LCD blink mode. * This parameter can be one of the following values: * @arg LCD_BLINKMODE_OFF: Blink disabled * @arg LCD_BLINKMODE_SEG0_COM0: Blink enabled on SEG[0], COM[0] (1 pixel) * @arg LCD_BLINKMODE_SEG0_ALLCOM: Blink enabled on SEG[0], all COM (up to 8 * pixels according to the programmed duty) * @arg LCD_BLINKMODE_ALLSEG_ALLCOM: Blink enabled on all SEG and all COM * (all pixels) * @param __BLINKFREQUENCY__: specifies the LCD blink frequency. * @arg LCD_BLINKFREQUENCY_DIV8: The Blink frequency = fLcd/8 * @arg LCD_BLINKFREQUENCY_DIV16: The Blink frequency = fLcd/16 * @arg LCD_BLINKFREQUENCY_DIV32: The Blink frequency = fLcd/32 * @arg LCD_BLINKFREQUENCY_DIV64: The Blink frequency = fLcd/64 * @arg LCD_BLINKFREQUENCY_DIV128: The Blink frequency = fLcd/128 * @arg LCD_BLINKFREQUENCY_DIV256: The Blink frequency = fLcd/256 * @arg LCD_BLINKFREQUENCY_DIV512: The Blink frequency = fLcd/512 * @arg LCD_BLINKFREQUENCY_DIV1024: The Blink frequency = fLcd/1024 * @retval None */ #define __HAL_LCD_BLINK_CONFIG(__HANDLE__, __BLINKMODE__, __BLINKFREQUENCY__) \ do{ \ MODIFY_REG((__HANDLE__)->Instance->FCR, (LCD_FCR_BLINKF | LCD_FCR_BLINK), ((__BLINKMODE__) | (__BLINKFREQUENCY__))); \ LCD_WaitForSynchro(__HANDLE__); \ }while(0) /** @brief Enables or disables the specified LCD interrupt. * @param __HANDLE__: specifies the LCD Handle. * @param __INTERRUPT__: specifies the LCD interrupt source to be enabled or disabled. * This parameter can be one of the following values: * @arg LCD_IT_SOF: Start of Frame Interrupt * @arg LCD_IT_UDD: Update Display Done Interrupt * @retval None */ #define __HAL_LCD_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ do{ \ ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)); \ LCD_WaitForSynchro(__HANDLE__); \ }while(0) #define __HAL_LCD_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ do{ \ ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__));\ LCD_WaitForSynchro(__HANDLE__); \ }while(0) /** @brief Checks whether the specified LCD interrupt is enabled or not. * @param __HANDLE__: specifies the LCD Handle. * @param __IT__: specifies the LCD interrupt source to check. * This parameter can be one of the following values: * @arg LCD_IT_SOF: Start of Frame Interrupt * @arg LCD_IT_UDD: Update Display Done Interrupt. * @note If the device is in STOP mode (PCLK not provided) UDD will not * generate an interrupt even if UDDIE = 1. * If the display is not enabled the UDD interrupt will never occur. * @retval The state of __IT__ (TRUE or FALSE). */ #define __HAL_LCD_GET_IT_SOURCE(__HANDLE__, __IT__) (((__HANDLE__)->Instance->FCR) & (__IT__)) /** @brief Checks whether the specified LCD flag is set or not. * @param __HANDLE__: specifies the LCD Handle. * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: * @arg LCD_FLAG_ENS: LCD Enabled flag. It indicates the LCD controller status. * @note The ENS bit is set immediately when the LCDEN bit in the LCD_CR * goes from 0 to 1. On deactivation it reflects the real status of * LCD so it becomes 0 at the end of the last displayed frame. * @arg LCD_FLAG_SOF: Start of Frame flag. This flag is set by hardware at * the beginning of a new frame, at the same time as the display data is * updated. * @arg LCD_FLAG_UDR: Update Display Request flag. * @arg LCD_FLAG_UDD: Update Display Done flag. * @arg LCD_FLAG_RDY: Step_up converter Ready flag. It indicates the status * of the step-up converter. * @arg LCD_FLAG_FCRSF: LCD Frame Control Register Synchronization Flag. * This flag is set by hardware each time the LCD_FCR register is updated * in the LCDCLK domain. * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_LCD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) /** @brief Clears the specified LCD pending flag. * @param __HANDLE__: specifies the LCD Handle. * @param __FLAG__: specifies the flag to check. * This parameter can be any combination of the following values: * @arg LCD_FLAG_SOF: Start of Frame Interrupt * @arg LCD_FLAG_UDD: Update Display Done Interrupt * @retval None */ #define __HAL_LCD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLR = (__FLAG__)) /* Exported functions ------------------------------------------------------- */ /* Initialization/de-initialization methods **********************************/ HAL_StatusTypeDef HAL_LCD_DeInit(LCD_HandleTypeDef *hlcd); HAL_StatusTypeDef HAL_LCD_Init(LCD_HandleTypeDef *hlcd); void HAL_LCD_MspInit(LCD_HandleTypeDef *hlcd); void HAL_LCD_MspDeInit(LCD_HandleTypeDef *hlcd); /* IO operation methods *******************************************************/ HAL_StatusTypeDef HAL_LCD_Write(LCD_HandleTypeDef *hlcd, uint32_t RAMRegisterIndex, uint32_t RAMRegisterMask, uint32_t Data); HAL_StatusTypeDef HAL_LCD_Clear(LCD_HandleTypeDef *hlcd); HAL_StatusTypeDef HAL_LCD_UpdateDisplayRequest(LCD_HandleTypeDef *hlcd); /* Peripheral State methods **************************************************/ HAL_LCD_StateTypeDef HAL_LCD_GetState(LCD_HandleTypeDef *hlcd); uint32_t HAL_LCD_GetError(LCD_HandleTypeDef *hlcd); /* Private functions ---------------------------------------------------------*/ HAL_StatusTypeDef LCD_WaitForSynchro(LCD_HandleTypeDef *hlcd); #endif /* STM32L051xx && STM32L052xx && STM32L062xx && STM32L061xx*/ #ifdef __cplusplus } #endif #endif /* __STM32L0xx_HAL_LCD_H */ /** * @} */ /** * @} */ /******************* (C) COPYRIGHT 2014 STMicroelectronics *****END OF FILE****/