mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_F103RB/stm32f10x_exti.c
- Committer:
- shaoziyang
- Date:
- 2014-09-13
- Revision:
- 323:9e901b0a5aa1
- Parent:
- 84:f54042cbc282
File content as of revision 323:9e901b0a5aa1:
/** ****************************************************************************** * @file stm32f10x_exti.c * @author MCD Application Team * @version V3.6.1 * @date 05-March-2012 * @brief This file provides all the EXTI firmware functions. ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ /* Includes ------------------------------------------------------------------*/ #include "stm32f10x_exti.h" /** @addtogroup STM32F10x_StdPeriph_Driver * @{ */ /** @defgroup EXTI * @brief EXTI driver modules * @{ */ /** @defgroup EXTI_Private_TypesDefinitions * @{ */ /** * @} */ /** @defgroup EXTI_Private_Defines * @{ */ #define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */ /** * @} */ /** @defgroup EXTI_Private_Macros * @{ */ /** * @} */ /** @defgroup EXTI_Private_Variables * @{ */ /** * @} */ /** @defgroup EXTI_Private_FunctionPrototypes * @{ */ /** * @} */ /** @defgroup EXTI_Private_Functions * @{ */ /** * @brief Deinitializes the EXTI peripheral registers to their default reset values. * @param None * @retval None */ void EXTI_DeInit(void) { EXTI->IMR = 0x00000000; EXTI->EMR = 0x00000000; EXTI->RTSR = 0x00000000; EXTI->FTSR = 0x00000000; EXTI->PR = 0x000FFFFF; } /** * @brief Initializes the EXTI peripheral according to the specified * parameters in the EXTI_InitStruct. * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure * that contains the configuration information for the EXTI peripheral. * @retval None */ void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) { uint32_t tmp = 0; /* Check the parameters */ assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); tmp = (uint32_t)EXTI_BASE; if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) { /* Clear EXTI line configuration */ EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; tmp += EXTI_InitStruct->EXTI_Mode; *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; /* Clear Rising Falling edge configuration */ EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; /* Select the trigger for the selected external interrupts */ if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) { /* Rising Falling edge */ EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; } else { tmp = (uint32_t)EXTI_BASE; tmp += EXTI_InitStruct->EXTI_Trigger; *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; } } else { tmp += EXTI_InitStruct->EXTI_Mode; /* Disable the selected external lines */ *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line; } } /** * @brief Fills each EXTI_InitStruct member with its reset value. * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will * be initialized. * @retval None */ void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) { EXTI_InitStruct->EXTI_Line = EXTI_LINENONE; EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; EXTI_InitStruct->EXTI_LineCmd = DISABLE; } /** * @brief Generates a Software interrupt. * @param EXTI_Line: specifies the EXTI lines to be enabled or disabled. * This parameter can be any combination of EXTI_Linex where x can be (0..19). * @retval None */ void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) { /* Check the parameters */ assert_param(IS_EXTI_LINE(EXTI_Line)); EXTI->SWIER |= EXTI_Line; } /** * @brief Checks whether the specified EXTI line flag is set or not. * @param EXTI_Line: specifies the EXTI line flag to check. * This parameter can be: * @arg EXTI_Linex: External interrupt line x where x(0..19) * @retval The new state of EXTI_Line (SET or RESET). */ FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) { FlagStatus bitstatus = RESET; /* Check the parameters */ assert_param(IS_GET_EXTI_LINE(EXTI_Line)); if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) { bitstatus = SET; } else { bitstatus = RESET; } return bitstatus; } /** * @brief Clears the EXTI's line pending flags. * @param EXTI_Line: specifies the EXTI lines flags to clear. * This parameter can be any combination of EXTI_Linex where x can be (0..19). * @retval None */ void EXTI_ClearFlag(uint32_t EXTI_Line) { /* Check the parameters */ assert_param(IS_EXTI_LINE(EXTI_Line)); EXTI->PR = EXTI_Line; } /** * @brief Checks whether the specified EXTI line is asserted or not. * @param EXTI_Line: specifies the EXTI line to check. * This parameter can be: * @arg EXTI_Linex: External interrupt line x where x(0..19) * @retval The new state of EXTI_Line (SET or RESET). */ ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) { ITStatus bitstatus = RESET; uint32_t enablestatus = 0; /* Check the parameters */ assert_param(IS_GET_EXTI_LINE(EXTI_Line)); enablestatus = EXTI->IMR & EXTI_Line; if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) { bitstatus = SET; } else { bitstatus = RESET; } return bitstatus; } /** * @brief Clears the EXTI's line pending bits. * @param EXTI_Line: specifies the EXTI lines to clear. * This parameter can be any combination of EXTI_Linex where x can be (0..19). * @retval None */ void EXTI_ClearITPendingBit(uint32_t EXTI_Line) { /* Check the parameters */ assert_param(IS_EXTI_LINE(EXTI_Line)); EXTI->PR = EXTI_Line; } /** * @} */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/