mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/TARGET_LPC11XX/PinNames.h
- Committer:
- mbed_official
- Date:
- 2014-03-10
- Revision:
- 113:65a335a675de
- Parent:
- 30:91c1d09ada54
File content as of revision 113:65a335a675de:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 12 #define PIN_SHIFT 8 typedef enum { // LPC1114 Pin Names (PORT[15:12] + PIN[11:8] + IOCON offset[7:0]) P0_0 = (0 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x0c, P0_1 = (0 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x10, P0_2 = (0 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x1c, P0_3 = (0 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x2c, P0_4 = (0 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x30, P0_5 = (0 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x34, P0_6 = (0 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x4c, P0_7 = (0 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x50, P0_8 = (0 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x60, P0_9 = (0 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x64, P0_11 = (0 << PORT_SHIFT) | (11 << PIN_SHIFT) | 0x74, P1_0 = (1 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x78, P1_1 = (1 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x7c, P1_2 = (1 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x80, P1_4 = (1 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x94, P1_5 = (1 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0xa0, P1_6 = (1 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0xa4, P1_7 = (1 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0xa8, P1_8 = (1 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x14, P1_9 = (1 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x38, P1_10 = (1 << PORT_SHIFT) | (10 << PIN_SHIFT) | 0x6c, P1_11 = (1 << PORT_SHIFT) | (11 << PIN_SHIFT) | 0x98, P2_0 = (2 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x08, P2_1 = (2 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x28, P2_2 = (2 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x5c, P2_3 = (2 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x8c, P2_4 = (2 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x40, P2_5 = (2 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x44, P2_6 = (2 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x00, P2_7 = (2 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x20, P2_8 = (2 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x24, P2_9 = (2 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x54, P2_10 = (2 << PORT_SHIFT) | (10 << PIN_SHIFT) | 0x58, P2_11 = (2 << PORT_SHIFT) | (11 << PIN_SHIFT) | 0x70, P3_0 = (3 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x84, P3_1 = (3 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x88, P3_2 = (3 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x9c, P3_3 = (3 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0xac, P3_4 = (3 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x3c, P3_5 = (3 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x48, // mbed DIP Pin Names (CQ board) p4 = P0_0, p5 = P0_9, p6 = P0_8, p7 = P0_6, p8 = P1_5, p9 = P1_7, p10 = P1_6, p11 = P0_7, p12 = P1_0, p13 = P1_1, p14 = P1_2, p15 = P0_11, p16 = P1_0, p17 = P1_1, p18 = P1_2, p20 = P1_4, p22 = P0_2, p23 = P0_11, p24 = P0_2, p25 = P1_8, p26 = P1_9, p27 = P0_4, p28 = P0_5, p29 = P0_3, p30 = P0_1, // Other mbed Pin Names LED1 = P1_5, LED2 = P0_7, LED3 = P1_5, LED4 = P0_7, USBTX = P1_7, USBRX = P1_6, // mbed DIP Pin Names (LPCXpresso LPC1114) xp4 = P0_0, xp5 = P0_9, xp6 = P0_8, xp7 = P2_11, xp8 = P0_2, xp9 = P1_7, xp10 = P1_6, xp11 = P0_7, xp12 = P2_0, xp13 = P2_1, xp14 = P2_2, xp15 = P0_11, xp16 = P1_0, xp17 = P1_1, xp18 = P1_2, xp20 = P1_4, xp21 = P1_5, xp22 = P1_8, xp23 = P0_6, xp25 = P3_0, xp26 = P3_1, xp27 = P3_2, xp29 = P3_3, xp30 = P2_10, xp31 = P2_9, xp32 = P2_8, xp33 = P2_7, xp34 = P2_6, xp35 = P2_5, xp36 = P2_4, xp37 = P2_3, xp38 = P1_11, xp39 = P1_10, xp40 = P1_9, xp41 = P0_4, xp42 = P0_5, xp43 = P0_3, xp44 = P0_1, // Other mbed Pin Names xLED1 = P0_7, // DIP Package Names dp1 = P0_8, dp2 = P0_9, dp4 = P0_11, dp5 = P0_5, dp6 = P0_6, dp9 = P1_0, dp10 = P1_1, dp11 = P1_2, dp13 = P1_4, dp14 = P1_5, dp15 = P1_6, dp16 = P1_7, dp17 = P1_8, dp18 = P1_9, dp23 = P0_0, dp24 = P0_1, dp25 = P0_2, dp26 = P0_3, dp27 = P0_4, dp28 = P0_7, dip1 = P0_8, dip2 = P0_9, dip4 = P0_11, dip5 = P0_5, dip6 = P0_6, dip9 = P1_0, dip10 = P1_1, dip11 = P1_2, dip13 = P1_4, dip14 = P1_5, dip15 = P1_6, dip16 = P1_7, dip17 = P1_8, dip18 = P1_9, dip23 = P0_0, dip24 = P0_1, dip25 = P0_2, dip26 = P0_3, dip27 = P0_4, dip28 = P0_7, // Not connected NC = (int)0xFFFFFFFF, } PinName; typedef enum { CHANNEL0 = WAKEUP0_IRQn, CHANNEL1 = WAKEUP1_IRQn, CHANNEL2 = WAKEUP2_IRQn, CHANNEL3 = WAKEUP3_IRQn, CHANNEL4 = WAKEUP4_IRQn, CHANNEL5 = WAKEUP5_IRQn, CHANNEL6 = WAKEUP6_IRQn, CHANNEL7 = WAKEUP7_IRQn } Channel; typedef enum { PullUp = 2, PullDown = 1, PullNone = 0, Repeater = 3, OpenDrain = 4, PullDefault = PullDown } PinMode; #ifdef __cplusplus } #endif #endif