mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_XADOW_M0/PinNames.h
- Committer:
- mbed_official
- Date:
- 2014-08-11
- Revision:
- 279:26b9e96a0278
File content as of revision 279:26b9e96a0278:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 5 typedef enum { // LPC11U Pin Names P0_0 = 0, P0_1 = 1, P0_2 = 2, P0_3 = 3, P0_4 = 4, P0_5 = 5, P0_6 = 6, P0_7 = 7, P0_8 = 8, P0_9 = 9, P0_10 = 10, P0_11 = 11, P0_12 = 12, P0_13 = 13, P0_14 = 14, P0_15 = 15, P0_16 = 16, P0_17 = 17, P0_18 = 18, P0_19 = 19, P0_20 = 20, P0_21 = 21, P0_22 = 22, P0_23 = 23, P0_24 = 24, P0_25 = 25, P0_26 = 26, P0_27 = 27, P1_0 = 32, P1_1 = 33, P1_2 = 34, P1_3 = 35, P1_4 = 36, P1_5 = 37, P1_6 = 38, P1_7 = 39, P1_8 = 40, P1_9 = 41, P1_10 = 42, P1_11 = 43, P1_12 = 44, P1_13 = 45, P1_14 = 46, P1_15 = 47, P1_16 = 48, P1_17 = 49, P1_18 = 50, P1_19 = 51, P1_20 = 52, P1_21 = 53, P1_22 = 54, P1_23 = 55, P1_24 = 56, P1_25 = 57, P1_26 = 58, P1_27 = 59, P1_28 = 60, P1_29 = 61, P1_31 = 63, // mbed DIP Pin Names // CN1-1 (GND) // CN1-2 (EXTPOWER) // CN1-3 (NC) p4 = P0_0, // CN1-4 p5 = P0_9, // CN1-5 p6 = P0_8, // CN1-6 p7 = P0_10, // CN1-7 p8 = P0_7, // CN1-8 p9 = P0_19, // CN1-9 p10 = P0_18, // CN1-10 p11 = P0_21, // CN1-11 p12 = P0_22, // CN1-12 p13 = P1_15, // CN1-13 p14 = P0_6, // CN1-14 p15 = P0_11, // CN1-15 p16 = P0_12, // CN1-16 p17 = P0_13, // CN1-17 p18 = P0_14, // CN1-18 p19 = P0_15, // CN1-19 p20 = P0_16, // CN1-20 p21 = P0_14, // CN2-20 p22 = P0_2, // CN2-19 p23 = P0_23, // CN2-18 p24 = P0_17, // CN2-17 p25 = P0_20, // CN2-16 p26 = P1_15, // CN2-15 p27 = P0_4, // CN2-14 p28 = P0_5, // CN2-13 p29 = P1_19, // CN2-12 p30 = P0_1, // CN2-11 // CN2-10 (D+USB) // CN2-9 (D-USB) p33 = P0_3, // CN2-8 (USB-VBUS) // CN2-7 (NC) // CN2-6 (NC) // CN2-5 (NC) // CN2-4 (NC) // CN2-3 (NC) // CN2-2 (VDD) // CN2-1 (VDD) // Other mbed Pin Names LED1 = P0_20, LED2 = P0_23, LED3 = P0_20, LED4 = P0_23, UART_TX = P0_19, UART_RX = P0_18, I2C_SCL = P0_4, I2C_SDA = P0_5, // Not connected NC = (int)0xFFFFFFFF, } PinName; typedef enum { CHANNEL0 = FLEX_INT0_IRQn, CHANNEL1 = FLEX_INT1_IRQn, CHANNEL2 = FLEX_INT2_IRQn, CHANNEL3 = FLEX_INT3_IRQn, CHANNEL4 = FLEX_INT4_IRQn, CHANNEL5 = FLEX_INT5_IRQn, CHANNEL6 = FLEX_INT6_IRQn, CHANNEL7 = FLEX_INT7_IRQn } Channel; typedef enum { PullUp = 2, PullDown = 1, PullNone = 0, Repeater = 3, OpenDrain = 4, PullDefault = PullDown } PinMode; #ifdef __cplusplus } #endif #endif