mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_cmt.h
- Committer:
- mbed_official
- Date:
- 2014-04-03
- Revision:
- 149:1fb5f62b92bd
- Parent:
- targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_cmt.h@ 146:f64d43ff0c18
File content as of revision 149:1fb5f62b92bd:
/* * Copyright (c) 2014, Freescale Semiconductor, Inc. * All rights reserved. * * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. */ /* * WARNING! DO NOT EDIT THIS FILE DIRECTLY! * * This file was generated automatically and any changes may be lost. */ #ifndef __HW_CMT_REGISTERS_H__ #define __HW_CMT_REGISTERS_H__ #include "regs.h" /* * MK64F12 CMT * * Carrier Modulator Transmitter * * Registers defined in this header file: * - HW_CMT_CGH1 - CMT Carrier Generator High Data Register 1 * - HW_CMT_CGL1 - CMT Carrier Generator Low Data Register 1 * - HW_CMT_CGH2 - CMT Carrier Generator High Data Register 2 * - HW_CMT_CGL2 - CMT Carrier Generator Low Data Register 2 * - HW_CMT_OC - CMT Output Control Register * - HW_CMT_MSC - CMT Modulator Status and Control Register * - HW_CMT_CMD1 - CMT Modulator Data Register Mark High * - HW_CMT_CMD2 - CMT Modulator Data Register Mark Low * - HW_CMT_CMD3 - CMT Modulator Data Register Space High * - HW_CMT_CMD4 - CMT Modulator Data Register Space Low * - HW_CMT_PPS - CMT Primary Prescaler Register * - HW_CMT_DMA - CMT Direct Memory Access Register * * - hw_cmt_t - Struct containing all module registers. */ //! @name Module base addresses //@{ #ifndef REGS_CMT_BASE #define HW_CMT_INSTANCE_COUNT (1U) //!< Number of instances of the CMT module. #define REGS_CMT_BASE (0x40062000U) //!< Base address for CMT. #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_CGH1 - CMT Carrier Generator High Data Register 1 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_CGH1 - CMT Carrier Generator High Data Register 1 (RW) * * Reset value: 0x00U * * This data register contains the primary high value for generating the carrier * output. */ typedef union _hw_cmt_cgh1 { uint8_t U; struct _hw_cmt_cgh1_bitfields { uint8_t PH : 8; //!< [7:0] Primary Carrier High Time Data Value } B; } hw_cmt_cgh1_t; #endif /*! * @name Constants and macros for entire CMT_CGH1 register */ //@{ #define HW_CMT_CGH1_ADDR (REGS_CMT_BASE + 0x0U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_CGH1 (*(__IO hw_cmt_cgh1_t *) HW_CMT_CGH1_ADDR) #define HW_CMT_CGH1_RD() (HW_CMT_CGH1.U) #define HW_CMT_CGH1_WR(v) (HW_CMT_CGH1.U = (v)) #define HW_CMT_CGH1_SET(v) (HW_CMT_CGH1_WR(HW_CMT_CGH1_RD() | (v))) #define HW_CMT_CGH1_CLR(v) (HW_CMT_CGH1_WR(HW_CMT_CGH1_RD() & ~(v))) #define HW_CMT_CGH1_TOG(v) (HW_CMT_CGH1_WR(HW_CMT_CGH1_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_CGH1 bitfields */ /*! * @name Register CMT_CGH1, field PH[7:0] (RW) * * Contains the number of input clocks required to generate the carrier high * time period. When operating in Time mode, this register is always selected. When * operating in FSK mode, this register and the secondary register pair are * alternately selected under the control of the modulator. The primary carrier high * time value is undefined out of reset. This register must be written to nonzero * values before the carrier generator is enabled to avoid spurious results. */ //@{ #define BP_CMT_CGH1_PH (0U) //!< Bit position for CMT_CGH1_PH. #define BM_CMT_CGH1_PH (0xFFU) //!< Bit mask for CMT_CGH1_PH. #define BS_CMT_CGH1_PH (8U) //!< Bit field size in bits for CMT_CGH1_PH. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_CGH1_PH field. #define BR_CMT_CGH1_PH (HW_CMT_CGH1.U) #endif //! @brief Format value for bitfield CMT_CGH1_PH. #define BF_CMT_CGH1_PH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CGH1_PH), uint8_t) & BM_CMT_CGH1_PH) #ifndef __LANGUAGE_ASM__ //! @brief Set the PH field to a new value. #define BW_CMT_CGH1_PH(v) (HW_CMT_CGH1_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_CGL1 - CMT Carrier Generator Low Data Register 1 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_CGL1 - CMT Carrier Generator Low Data Register 1 (RW) * * Reset value: 0x00U * * This data register contains the primary low value for generating the carrier * output. */ typedef union _hw_cmt_cgl1 { uint8_t U; struct _hw_cmt_cgl1_bitfields { uint8_t PL : 8; //!< [7:0] Primary Carrier Low Time Data Value } B; } hw_cmt_cgl1_t; #endif /*! * @name Constants and macros for entire CMT_CGL1 register */ //@{ #define HW_CMT_CGL1_ADDR (REGS_CMT_BASE + 0x1U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_CGL1 (*(__IO hw_cmt_cgl1_t *) HW_CMT_CGL1_ADDR) #define HW_CMT_CGL1_RD() (HW_CMT_CGL1.U) #define HW_CMT_CGL1_WR(v) (HW_CMT_CGL1.U = (v)) #define HW_CMT_CGL1_SET(v) (HW_CMT_CGL1_WR(HW_CMT_CGL1_RD() | (v))) #define HW_CMT_CGL1_CLR(v) (HW_CMT_CGL1_WR(HW_CMT_CGL1_RD() & ~(v))) #define HW_CMT_CGL1_TOG(v) (HW_CMT_CGL1_WR(HW_CMT_CGL1_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_CGL1 bitfields */ /*! * @name Register CMT_CGL1, field PL[7:0] (RW) * * Contains the number of input clocks required to generate the carrier low time * period. When operating in Time mode, this register is always selected. When * operating in FSK mode, this register and the secondary register pair are * alternately selected under the control of the modulator. The primary carrier low * time value is undefined out of reset. This register must be written to nonzero * values before the carrier generator is enabled to avoid spurious results. */ //@{ #define BP_CMT_CGL1_PL (0U) //!< Bit position for CMT_CGL1_PL. #define BM_CMT_CGL1_PL (0xFFU) //!< Bit mask for CMT_CGL1_PL. #define BS_CMT_CGL1_PL (8U) //!< Bit field size in bits for CMT_CGL1_PL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_CGL1_PL field. #define BR_CMT_CGL1_PL (HW_CMT_CGL1.U) #endif //! @brief Format value for bitfield CMT_CGL1_PL. #define BF_CMT_CGL1_PL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CGL1_PL), uint8_t) & BM_CMT_CGL1_PL) #ifndef __LANGUAGE_ASM__ //! @brief Set the PL field to a new value. #define BW_CMT_CGL1_PL(v) (HW_CMT_CGL1_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_CGH2 - CMT Carrier Generator High Data Register 2 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_CGH2 - CMT Carrier Generator High Data Register 2 (RW) * * Reset value: 0x00U * * This data register contains the secondary high value for generating the * carrier output. */ typedef union _hw_cmt_cgh2 { uint8_t U; struct _hw_cmt_cgh2_bitfields { uint8_t SH : 8; //!< [7:0] Secondary Carrier High Time Data Value } B; } hw_cmt_cgh2_t; #endif /*! * @name Constants and macros for entire CMT_CGH2 register */ //@{ #define HW_CMT_CGH2_ADDR (REGS_CMT_BASE + 0x2U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_CGH2 (*(__IO hw_cmt_cgh2_t *) HW_CMT_CGH2_ADDR) #define HW_CMT_CGH2_RD() (HW_CMT_CGH2.U) #define HW_CMT_CGH2_WR(v) (HW_CMT_CGH2.U = (v)) #define HW_CMT_CGH2_SET(v) (HW_CMT_CGH2_WR(HW_CMT_CGH2_RD() | (v))) #define HW_CMT_CGH2_CLR(v) (HW_CMT_CGH2_WR(HW_CMT_CGH2_RD() & ~(v))) #define HW_CMT_CGH2_TOG(v) (HW_CMT_CGH2_WR(HW_CMT_CGH2_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_CGH2 bitfields */ /*! * @name Register CMT_CGH2, field SH[7:0] (RW) * * Contains the number of input clocks required to generate the carrier high * time period. When operating in Time mode, this register is never selected. When * operating in FSK mode, this register and the primary register pair are * alternately selected under control of the modulator. The secondary carrier high time * value is undefined out of reset. This register must be written to nonzero * values before the carrier generator is enabled when operating in FSK mode. */ //@{ #define BP_CMT_CGH2_SH (0U) //!< Bit position for CMT_CGH2_SH. #define BM_CMT_CGH2_SH (0xFFU) //!< Bit mask for CMT_CGH2_SH. #define BS_CMT_CGH2_SH (8U) //!< Bit field size in bits for CMT_CGH2_SH. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_CGH2_SH field. #define BR_CMT_CGH2_SH (HW_CMT_CGH2.U) #endif //! @brief Format value for bitfield CMT_CGH2_SH. #define BF_CMT_CGH2_SH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CGH2_SH), uint8_t) & BM_CMT_CGH2_SH) #ifndef __LANGUAGE_ASM__ //! @brief Set the SH field to a new value. #define BW_CMT_CGH2_SH(v) (HW_CMT_CGH2_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_CGL2 - CMT Carrier Generator Low Data Register 2 //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_CGL2 - CMT Carrier Generator Low Data Register 2 (RW) * * Reset value: 0x00U * * This data register contains the secondary low value for generating the * carrier output. */ typedef union _hw_cmt_cgl2 { uint8_t U; struct _hw_cmt_cgl2_bitfields { uint8_t SL : 8; //!< [7:0] Secondary Carrier Low Time Data Value } B; } hw_cmt_cgl2_t; #endif /*! * @name Constants and macros for entire CMT_CGL2 register */ //@{ #define HW_CMT_CGL2_ADDR (REGS_CMT_BASE + 0x3U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_CGL2 (*(__IO hw_cmt_cgl2_t *) HW_CMT_CGL2_ADDR) #define HW_CMT_CGL2_RD() (HW_CMT_CGL2.U) #define HW_CMT_CGL2_WR(v) (HW_CMT_CGL2.U = (v)) #define HW_CMT_CGL2_SET(v) (HW_CMT_CGL2_WR(HW_CMT_CGL2_RD() | (v))) #define HW_CMT_CGL2_CLR(v) (HW_CMT_CGL2_WR(HW_CMT_CGL2_RD() & ~(v))) #define HW_CMT_CGL2_TOG(v) (HW_CMT_CGL2_WR(HW_CMT_CGL2_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_CGL2 bitfields */ /*! * @name Register CMT_CGL2, field SL[7:0] (RW) * * Contains the number of input clocks required to generate the carrier low time * period. When operating in Time mode, this register is never selected. When * operating in FSK mode, this register and the primary register pair are * alternately selected under the control of the modulator. The secondary carrier low time * value is undefined out of reset. This register must be written to nonzero * values before the carrier generator is enabled when operating in FSK mode. */ //@{ #define BP_CMT_CGL2_SL (0U) //!< Bit position for CMT_CGL2_SL. #define BM_CMT_CGL2_SL (0xFFU) //!< Bit mask for CMT_CGL2_SL. #define BS_CMT_CGL2_SL (8U) //!< Bit field size in bits for CMT_CGL2_SL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_CGL2_SL field. #define BR_CMT_CGL2_SL (HW_CMT_CGL2.U) #endif //! @brief Format value for bitfield CMT_CGL2_SL. #define BF_CMT_CGL2_SL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CGL2_SL), uint8_t) & BM_CMT_CGL2_SL) #ifndef __LANGUAGE_ASM__ //! @brief Set the SL field to a new value. #define BW_CMT_CGL2_SL(v) (HW_CMT_CGL2_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_OC - CMT Output Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_OC - CMT Output Control Register (RW) * * Reset value: 0x00U * * This register is used to control the IRO signal of the CMT module. */ typedef union _hw_cmt_oc { uint8_t U; struct _hw_cmt_oc_bitfields { uint8_t RESERVED0 : 5; //!< [4:0] uint8_t IROPEN : 1; //!< [5] IRO Pin Enable uint8_t CMTPOL : 1; //!< [6] CMT Output Polarity uint8_t IROL : 1; //!< [7] IRO Latch Control } B; } hw_cmt_oc_t; #endif /*! * @name Constants and macros for entire CMT_OC register */ //@{ #define HW_CMT_OC_ADDR (REGS_CMT_BASE + 0x4U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_OC (*(__IO hw_cmt_oc_t *) HW_CMT_OC_ADDR) #define HW_CMT_OC_RD() (HW_CMT_OC.U) #define HW_CMT_OC_WR(v) (HW_CMT_OC.U = (v)) #define HW_CMT_OC_SET(v) (HW_CMT_OC_WR(HW_CMT_OC_RD() | (v))) #define HW_CMT_OC_CLR(v) (HW_CMT_OC_WR(HW_CMT_OC_RD() & ~(v))) #define HW_CMT_OC_TOG(v) (HW_CMT_OC_WR(HW_CMT_OC_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_OC bitfields */ /*! * @name Register CMT_OC, field IROPEN[5] (RW) * * Enables and disables the IRO signal. When the IRO signal is enabled, it is an * output that drives out either the CMT transmitter output or the state of IROL * depending on whether MSC[MCGEN] is set or not. Also, the state of output is * either inverted or non-inverted, depending on the state of CMTPOL. When the IRO * signal is disabled, it is in a high-impedance state and is unable to draw any * current. This signal is disabled during reset. * * Values: * - 0 - The IRO signal is disabled. * - 1 - The IRO signal is enabled as output. */ //@{ #define BP_CMT_OC_IROPEN (5U) //!< Bit position for CMT_OC_IROPEN. #define BM_CMT_OC_IROPEN (0x20U) //!< Bit mask for CMT_OC_IROPEN. #define BS_CMT_OC_IROPEN (1U) //!< Bit field size in bits for CMT_OC_IROPEN. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_OC_IROPEN field. #define BR_CMT_OC_IROPEN (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_IROPEN)) #endif //! @brief Format value for bitfield CMT_OC_IROPEN. #define BF_CMT_OC_IROPEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_OC_IROPEN), uint8_t) & BM_CMT_OC_IROPEN) #ifndef __LANGUAGE_ASM__ //! @brief Set the IROPEN field to a new value. #define BW_CMT_OC_IROPEN(v) (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_IROPEN) = (v)) #endif //@} /*! * @name Register CMT_OC, field CMTPOL[6] (RW) * * Controls the polarity of the IRO signal. * * Values: * - 0 - The IRO signal is active-low. * - 1 - The IRO signal is active-high. */ //@{ #define BP_CMT_OC_CMTPOL (6U) //!< Bit position for CMT_OC_CMTPOL. #define BM_CMT_OC_CMTPOL (0x40U) //!< Bit mask for CMT_OC_CMTPOL. #define BS_CMT_OC_CMTPOL (1U) //!< Bit field size in bits for CMT_OC_CMTPOL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_OC_CMTPOL field. #define BR_CMT_OC_CMTPOL (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_CMTPOL)) #endif //! @brief Format value for bitfield CMT_OC_CMTPOL. #define BF_CMT_OC_CMTPOL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_OC_CMTPOL), uint8_t) & BM_CMT_OC_CMTPOL) #ifndef __LANGUAGE_ASM__ //! @brief Set the CMTPOL field to a new value. #define BW_CMT_OC_CMTPOL(v) (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_CMTPOL) = (v)) #endif //@} /*! * @name Register CMT_OC, field IROL[7] (RW) * * Reads the state of the IRO latch. Writing to IROL changes the state of the * IRO signal when MSC[MCGEN] is cleared and IROPEN is set. */ //@{ #define BP_CMT_OC_IROL (7U) //!< Bit position for CMT_OC_IROL. #define BM_CMT_OC_IROL (0x80U) //!< Bit mask for CMT_OC_IROL. #define BS_CMT_OC_IROL (1U) //!< Bit field size in bits for CMT_OC_IROL. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_OC_IROL field. #define BR_CMT_OC_IROL (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_IROL)) #endif //! @brief Format value for bitfield CMT_OC_IROL. #define BF_CMT_OC_IROL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_OC_IROL), uint8_t) & BM_CMT_OC_IROL) #ifndef __LANGUAGE_ASM__ //! @brief Set the IROL field to a new value. #define BW_CMT_OC_IROL(v) (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_IROL) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_MSC - CMT Modulator Status and Control Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_MSC - CMT Modulator Status and Control Register (RW) * * Reset value: 0x00U * * This register contains the modulator and carrier generator enable (MCGEN), * end of cycle interrupt enable (EOCIE), FSK mode select (FSK), baseband enable * (BASE), extended space (EXSPC), prescaler (CMTDIV) bits, and the end of cycle * (EOCF) status bit. */ typedef union _hw_cmt_msc { uint8_t U; struct _hw_cmt_msc_bitfields { uint8_t MCGEN : 1; //!< [0] Modulator and Carrier Generator Enable uint8_t EOCIE : 1; //!< [1] End of Cycle Interrupt Enable uint8_t FSK : 1; //!< [2] FSK Mode Select uint8_t BASE : 1; //!< [3] Baseband Enable uint8_t EXSPC : 1; //!< [4] Extended Space Enable uint8_t CMTDIV : 2; //!< [6:5] CMT Clock Divide Prescaler uint8_t EOCF : 1; //!< [7] End Of Cycle Status Flag } B; } hw_cmt_msc_t; #endif /*! * @name Constants and macros for entire CMT_MSC register */ //@{ #define HW_CMT_MSC_ADDR (REGS_CMT_BASE + 0x5U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_MSC (*(__IO hw_cmt_msc_t *) HW_CMT_MSC_ADDR) #define HW_CMT_MSC_RD() (HW_CMT_MSC.U) #define HW_CMT_MSC_WR(v) (HW_CMT_MSC.U = (v)) #define HW_CMT_MSC_SET(v) (HW_CMT_MSC_WR(HW_CMT_MSC_RD() | (v))) #define HW_CMT_MSC_CLR(v) (HW_CMT_MSC_WR(HW_CMT_MSC_RD() & ~(v))) #define HW_CMT_MSC_TOG(v) (HW_CMT_MSC_WR(HW_CMT_MSC_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_MSC bitfields */ /*! * @name Register CMT_MSC, field MCGEN[0] (RW) * * Setting MCGEN will initialize the carrier generator and modulator and will * enable all clocks. When enabled, the carrier generator and modulator will * function continuously. When MCGEN is cleared, the current modulator cycle will be * allowed to expire before all carrier and modulator clocks are disabled to save * power and the modulator output is forced low. To prevent spurious operation, * the user should initialize all data and control registers before enabling the * system. * * Values: * - 0 - Modulator and carrier generator disabled * - 1 - Modulator and carrier generator enabled */ //@{ #define BP_CMT_MSC_MCGEN (0U) //!< Bit position for CMT_MSC_MCGEN. #define BM_CMT_MSC_MCGEN (0x01U) //!< Bit mask for CMT_MSC_MCGEN. #define BS_CMT_MSC_MCGEN (1U) //!< Bit field size in bits for CMT_MSC_MCGEN. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_MSC_MCGEN field. #define BR_CMT_MSC_MCGEN (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_MCGEN)) #endif //! @brief Format value for bitfield CMT_MSC_MCGEN. #define BF_CMT_MSC_MCGEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_MCGEN), uint8_t) & BM_CMT_MSC_MCGEN) #ifndef __LANGUAGE_ASM__ //! @brief Set the MCGEN field to a new value. #define BW_CMT_MSC_MCGEN(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_MCGEN) = (v)) #endif //@} /*! * @name Register CMT_MSC, field EOCIE[1] (RW) * * Requests to enable a CPU interrupt when EOCF is set if EOCIE is high. * * Values: * - 0 - CPU interrupt is disabled. * - 1 - CPU interrupt is enabled. */ //@{ #define BP_CMT_MSC_EOCIE (1U) //!< Bit position for CMT_MSC_EOCIE. #define BM_CMT_MSC_EOCIE (0x02U) //!< Bit mask for CMT_MSC_EOCIE. #define BS_CMT_MSC_EOCIE (1U) //!< Bit field size in bits for CMT_MSC_EOCIE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_MSC_EOCIE field. #define BR_CMT_MSC_EOCIE (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EOCIE)) #endif //! @brief Format value for bitfield CMT_MSC_EOCIE. #define BF_CMT_MSC_EOCIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_EOCIE), uint8_t) & BM_CMT_MSC_EOCIE) #ifndef __LANGUAGE_ASM__ //! @brief Set the EOCIE field to a new value. #define BW_CMT_MSC_EOCIE(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EOCIE) = (v)) #endif //@} /*! * @name Register CMT_MSC, field FSK[2] (RW) * * Enables FSK operation. * * Values: * - 0 - The CMT operates in Time or Baseband mode. * - 1 - The CMT operates in FSK mode. */ //@{ #define BP_CMT_MSC_FSK (2U) //!< Bit position for CMT_MSC_FSK. #define BM_CMT_MSC_FSK (0x04U) //!< Bit mask for CMT_MSC_FSK. #define BS_CMT_MSC_FSK (1U) //!< Bit field size in bits for CMT_MSC_FSK. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_MSC_FSK field. #define BR_CMT_MSC_FSK (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_FSK)) #endif //! @brief Format value for bitfield CMT_MSC_FSK. #define BF_CMT_MSC_FSK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_FSK), uint8_t) & BM_CMT_MSC_FSK) #ifndef __LANGUAGE_ASM__ //! @brief Set the FSK field to a new value. #define BW_CMT_MSC_FSK(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_FSK) = (v)) #endif //@} /*! * @name Register CMT_MSC, field BASE[3] (RW) * * When set, BASE disables the carrier generator and forces the carrier output * high for generation of baseband protocols. When BASE is cleared, the carrier * generator is enabled and the carrier output toggles at the frequency determined * by values stored in the carrier data registers. This field is cleared by * reset. This field is not double-buffered and must not be written to during a * transmission. * * Values: * - 0 - Baseband mode is disabled. * - 1 - Baseband mode is enabled. */ //@{ #define BP_CMT_MSC_BASE (3U) //!< Bit position for CMT_MSC_BASE. #define BM_CMT_MSC_BASE (0x08U) //!< Bit mask for CMT_MSC_BASE. #define BS_CMT_MSC_BASE (1U) //!< Bit field size in bits for CMT_MSC_BASE. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_MSC_BASE field. #define BR_CMT_MSC_BASE (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_BASE)) #endif //! @brief Format value for bitfield CMT_MSC_BASE. #define BF_CMT_MSC_BASE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_BASE), uint8_t) & BM_CMT_MSC_BASE) #ifndef __LANGUAGE_ASM__ //! @brief Set the BASE field to a new value. #define BW_CMT_MSC_BASE(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_BASE) = (v)) #endif //@} /*! * @name Register CMT_MSC, field EXSPC[4] (RW) * * Enables the extended space operation. * * Values: * - 0 - Extended space is disabled. * - 1 - Extended space is enabled. */ //@{ #define BP_CMT_MSC_EXSPC (4U) //!< Bit position for CMT_MSC_EXSPC. #define BM_CMT_MSC_EXSPC (0x10U) //!< Bit mask for CMT_MSC_EXSPC. #define BS_CMT_MSC_EXSPC (1U) //!< Bit field size in bits for CMT_MSC_EXSPC. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_MSC_EXSPC field. #define BR_CMT_MSC_EXSPC (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EXSPC)) #endif //! @brief Format value for bitfield CMT_MSC_EXSPC. #define BF_CMT_MSC_EXSPC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_EXSPC), uint8_t) & BM_CMT_MSC_EXSPC) #ifndef __LANGUAGE_ASM__ //! @brief Set the EXSPC field to a new value. #define BW_CMT_MSC_EXSPC(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EXSPC) = (v)) #endif //@} /*! * @name Register CMT_MSC, field CMTDIV[6:5] (RW) * * Causes the CMT to be clocked at the IF signal frequency, or the IF frequency * divided by 2 ,4, or 8 . This field must not be changed during a transmission * because it is not double-buffered. * * Values: * - 00 - IF * 1 * - 01 - IF * 2 * - 10 - IF * 4 * - 11 - IF * 8 */ //@{ #define BP_CMT_MSC_CMTDIV (5U) //!< Bit position for CMT_MSC_CMTDIV. #define BM_CMT_MSC_CMTDIV (0x60U) //!< Bit mask for CMT_MSC_CMTDIV. #define BS_CMT_MSC_CMTDIV (2U) //!< Bit field size in bits for CMT_MSC_CMTDIV. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_MSC_CMTDIV field. #define BR_CMT_MSC_CMTDIV (HW_CMT_MSC.B.CMTDIV) #endif //! @brief Format value for bitfield CMT_MSC_CMTDIV. #define BF_CMT_MSC_CMTDIV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_CMTDIV), uint8_t) & BM_CMT_MSC_CMTDIV) #ifndef __LANGUAGE_ASM__ //! @brief Set the CMTDIV field to a new value. #define BW_CMT_MSC_CMTDIV(v) (HW_CMT_MSC_WR((HW_CMT_MSC_RD() & ~BM_CMT_MSC_CMTDIV) | BF_CMT_MSC_CMTDIV(v))) #endif //@} /*! * @name Register CMT_MSC, field EOCF[7] (RO) * * Sets when: The modulator is not currently active and MCGEN is set to begin * the initial CMT transmission. At the end of each modulation cycle while MCGEN is * set. This is recognized when a match occurs between the contents of the space * period register and the down counter. At this time, the counter is * initialized with, possibly new contents of the mark period buffer, CMD1 and CMD2, and * the space period register is loaded with, possibly new contents of the space * period buffer, CMD3 and CMD4. This flag is cleared by reading MSC followed by an * access of CMD2 or CMD4, or by the DMA transfer. * * Values: * - 0 - End of modulation cycle has not occured since the flag last cleared. * - 1 - End of modulator cycle has occurred. */ //@{ #define BP_CMT_MSC_EOCF (7U) //!< Bit position for CMT_MSC_EOCF. #define BM_CMT_MSC_EOCF (0x80U) //!< Bit mask for CMT_MSC_EOCF. #define BS_CMT_MSC_EOCF (1U) //!< Bit field size in bits for CMT_MSC_EOCF. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_MSC_EOCF field. #define BR_CMT_MSC_EOCF (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EOCF)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_CMD1 - CMT Modulator Data Register Mark High //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_CMD1 - CMT Modulator Data Register Mark High (RW) * * Reset value: 0x00U * * The contents of this register are transferred to the modulator down counter * upon the completion of a modulation period. */ typedef union _hw_cmt_cmd1 { uint8_t U; struct _hw_cmt_cmd1_bitfields { uint8_t MB : 8; //!< [7:0] } B; } hw_cmt_cmd1_t; #endif /*! * @name Constants and macros for entire CMT_CMD1 register */ //@{ #define HW_CMT_CMD1_ADDR (REGS_CMT_BASE + 0x6U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_CMD1 (*(__IO hw_cmt_cmd1_t *) HW_CMT_CMD1_ADDR) #define HW_CMT_CMD1_RD() (HW_CMT_CMD1.U) #define HW_CMT_CMD1_WR(v) (HW_CMT_CMD1.U = (v)) #define HW_CMT_CMD1_SET(v) (HW_CMT_CMD1_WR(HW_CMT_CMD1_RD() | (v))) #define HW_CMT_CMD1_CLR(v) (HW_CMT_CMD1_WR(HW_CMT_CMD1_RD() & ~(v))) #define HW_CMT_CMD1_TOG(v) (HW_CMT_CMD1_WR(HW_CMT_CMD1_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_CMD1 bitfields */ /*! * @name Register CMT_CMD1, field MB[7:0] (RW) * * Controls the upper mark periods of the modulator for all modes. */ //@{ #define BP_CMT_CMD1_MB (0U) //!< Bit position for CMT_CMD1_MB. #define BM_CMT_CMD1_MB (0xFFU) //!< Bit mask for CMT_CMD1_MB. #define BS_CMT_CMD1_MB (8U) //!< Bit field size in bits for CMT_CMD1_MB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_CMD1_MB field. #define BR_CMT_CMD1_MB (HW_CMT_CMD1.U) #endif //! @brief Format value for bitfield CMT_CMD1_MB. #define BF_CMT_CMD1_MB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CMD1_MB), uint8_t) & BM_CMT_CMD1_MB) #ifndef __LANGUAGE_ASM__ //! @brief Set the MB field to a new value. #define BW_CMT_CMD1_MB(v) (HW_CMT_CMD1_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_CMD2 - CMT Modulator Data Register Mark Low //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_CMD2 - CMT Modulator Data Register Mark Low (RW) * * Reset value: 0x00U * * The contents of this register are transferred to the modulator down counter * upon the completion of a modulation period. */ typedef union _hw_cmt_cmd2 { uint8_t U; struct _hw_cmt_cmd2_bitfields { uint8_t MB : 8; //!< [7:0] } B; } hw_cmt_cmd2_t; #endif /*! * @name Constants and macros for entire CMT_CMD2 register */ //@{ #define HW_CMT_CMD2_ADDR (REGS_CMT_BASE + 0x7U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_CMD2 (*(__IO hw_cmt_cmd2_t *) HW_CMT_CMD2_ADDR) #define HW_CMT_CMD2_RD() (HW_CMT_CMD2.U) #define HW_CMT_CMD2_WR(v) (HW_CMT_CMD2.U = (v)) #define HW_CMT_CMD2_SET(v) (HW_CMT_CMD2_WR(HW_CMT_CMD2_RD() | (v))) #define HW_CMT_CMD2_CLR(v) (HW_CMT_CMD2_WR(HW_CMT_CMD2_RD() & ~(v))) #define HW_CMT_CMD2_TOG(v) (HW_CMT_CMD2_WR(HW_CMT_CMD2_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_CMD2 bitfields */ /*! * @name Register CMT_CMD2, field MB[7:0] (RW) * * Controls the lower mark periods of the modulator for all modes. */ //@{ #define BP_CMT_CMD2_MB (0U) //!< Bit position for CMT_CMD2_MB. #define BM_CMT_CMD2_MB (0xFFU) //!< Bit mask for CMT_CMD2_MB. #define BS_CMT_CMD2_MB (8U) //!< Bit field size in bits for CMT_CMD2_MB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_CMD2_MB field. #define BR_CMT_CMD2_MB (HW_CMT_CMD2.U) #endif //! @brief Format value for bitfield CMT_CMD2_MB. #define BF_CMT_CMD2_MB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CMD2_MB), uint8_t) & BM_CMT_CMD2_MB) #ifndef __LANGUAGE_ASM__ //! @brief Set the MB field to a new value. #define BW_CMT_CMD2_MB(v) (HW_CMT_CMD2_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_CMD3 - CMT Modulator Data Register Space High //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_CMD3 - CMT Modulator Data Register Space High (RW) * * Reset value: 0x00U * * The contents of this register are transferred to the space period register * upon the completion of a modulation period. */ typedef union _hw_cmt_cmd3 { uint8_t U; struct _hw_cmt_cmd3_bitfields { uint8_t SB : 8; //!< [7:0] } B; } hw_cmt_cmd3_t; #endif /*! * @name Constants and macros for entire CMT_CMD3 register */ //@{ #define HW_CMT_CMD3_ADDR (REGS_CMT_BASE + 0x8U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_CMD3 (*(__IO hw_cmt_cmd3_t *) HW_CMT_CMD3_ADDR) #define HW_CMT_CMD3_RD() (HW_CMT_CMD3.U) #define HW_CMT_CMD3_WR(v) (HW_CMT_CMD3.U = (v)) #define HW_CMT_CMD3_SET(v) (HW_CMT_CMD3_WR(HW_CMT_CMD3_RD() | (v))) #define HW_CMT_CMD3_CLR(v) (HW_CMT_CMD3_WR(HW_CMT_CMD3_RD() & ~(v))) #define HW_CMT_CMD3_TOG(v) (HW_CMT_CMD3_WR(HW_CMT_CMD3_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_CMD3 bitfields */ /*! * @name Register CMT_CMD3, field SB[7:0] (RW) * * Controls the upper space periods of the modulator for all modes. */ //@{ #define BP_CMT_CMD3_SB (0U) //!< Bit position for CMT_CMD3_SB. #define BM_CMT_CMD3_SB (0xFFU) //!< Bit mask for CMT_CMD3_SB. #define BS_CMT_CMD3_SB (8U) //!< Bit field size in bits for CMT_CMD3_SB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_CMD3_SB field. #define BR_CMT_CMD3_SB (HW_CMT_CMD3.U) #endif //! @brief Format value for bitfield CMT_CMD3_SB. #define BF_CMT_CMD3_SB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CMD3_SB), uint8_t) & BM_CMT_CMD3_SB) #ifndef __LANGUAGE_ASM__ //! @brief Set the SB field to a new value. #define BW_CMT_CMD3_SB(v) (HW_CMT_CMD3_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_CMD4 - CMT Modulator Data Register Space Low //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_CMD4 - CMT Modulator Data Register Space Low (RW) * * Reset value: 0x00U * * The contents of this register are transferred to the space period register * upon the completion of a modulation period. */ typedef union _hw_cmt_cmd4 { uint8_t U; struct _hw_cmt_cmd4_bitfields { uint8_t SB : 8; //!< [7:0] } B; } hw_cmt_cmd4_t; #endif /*! * @name Constants and macros for entire CMT_CMD4 register */ //@{ #define HW_CMT_CMD4_ADDR (REGS_CMT_BASE + 0x9U) #ifndef __LANGUAGE_ASM__ #define HW_CMT_CMD4 (*(__IO hw_cmt_cmd4_t *) HW_CMT_CMD4_ADDR) #define HW_CMT_CMD4_RD() (HW_CMT_CMD4.U) #define HW_CMT_CMD4_WR(v) (HW_CMT_CMD4.U = (v)) #define HW_CMT_CMD4_SET(v) (HW_CMT_CMD4_WR(HW_CMT_CMD4_RD() | (v))) #define HW_CMT_CMD4_CLR(v) (HW_CMT_CMD4_WR(HW_CMT_CMD4_RD() & ~(v))) #define HW_CMT_CMD4_TOG(v) (HW_CMT_CMD4_WR(HW_CMT_CMD4_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_CMD4 bitfields */ /*! * @name Register CMT_CMD4, field SB[7:0] (RW) * * Controls the lower space periods of the modulator for all modes. */ //@{ #define BP_CMT_CMD4_SB (0U) //!< Bit position for CMT_CMD4_SB. #define BM_CMT_CMD4_SB (0xFFU) //!< Bit mask for CMT_CMD4_SB. #define BS_CMT_CMD4_SB (8U) //!< Bit field size in bits for CMT_CMD4_SB. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_CMD4_SB field. #define BR_CMT_CMD4_SB (HW_CMT_CMD4.U) #endif //! @brief Format value for bitfield CMT_CMD4_SB. #define BF_CMT_CMD4_SB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CMD4_SB), uint8_t) & BM_CMT_CMD4_SB) #ifndef __LANGUAGE_ASM__ //! @brief Set the SB field to a new value. #define BW_CMT_CMD4_SB(v) (HW_CMT_CMD4_WR(v)) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_PPS - CMT Primary Prescaler Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_PPS - CMT Primary Prescaler Register (RW) * * Reset value: 0x00U * * This register is used to set the Primary Prescaler Divider field (PPSDIV). */ typedef union _hw_cmt_pps { uint8_t U; struct _hw_cmt_pps_bitfields { uint8_t PPSDIV : 4; //!< [3:0] Primary Prescaler Divider uint8_t RESERVED0 : 4; //!< [7:4] } B; } hw_cmt_pps_t; #endif /*! * @name Constants and macros for entire CMT_PPS register */ //@{ #define HW_CMT_PPS_ADDR (REGS_CMT_BASE + 0xAU) #ifndef __LANGUAGE_ASM__ #define HW_CMT_PPS (*(__IO hw_cmt_pps_t *) HW_CMT_PPS_ADDR) #define HW_CMT_PPS_RD() (HW_CMT_PPS.U) #define HW_CMT_PPS_WR(v) (HW_CMT_PPS.U = (v)) #define HW_CMT_PPS_SET(v) (HW_CMT_PPS_WR(HW_CMT_PPS_RD() | (v))) #define HW_CMT_PPS_CLR(v) (HW_CMT_PPS_WR(HW_CMT_PPS_RD() & ~(v))) #define HW_CMT_PPS_TOG(v) (HW_CMT_PPS_WR(HW_CMT_PPS_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_PPS bitfields */ /*! * @name Register CMT_PPS, field PPSDIV[3:0] (RW) * * Divides the CMT clock to generate the Intermediate Frequency clock enable to * the secondary prescaler. * * Values: * - 0000 - Bus clock * 1 * - 0001 - Bus clock * 2 * - 0010 - Bus clock * 3 * - 0011 - Bus clock * 4 * - 0100 - Bus clock * 5 * - 0101 - Bus clock * 6 * - 0110 - Bus clock * 7 * - 0111 - Bus clock * 8 * - 1000 - Bus clock * 9 * - 1001 - Bus clock * 10 * - 1010 - Bus clock * 11 * - 1011 - Bus clock * 12 * - 1100 - Bus clock * 13 * - 1101 - Bus clock * 14 * - 1110 - Bus clock * 15 * - 1111 - Bus clock * 16 */ //@{ #define BP_CMT_PPS_PPSDIV (0U) //!< Bit position for CMT_PPS_PPSDIV. #define BM_CMT_PPS_PPSDIV (0x0FU) //!< Bit mask for CMT_PPS_PPSDIV. #define BS_CMT_PPS_PPSDIV (4U) //!< Bit field size in bits for CMT_PPS_PPSDIV. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_PPS_PPSDIV field. #define BR_CMT_PPS_PPSDIV (HW_CMT_PPS.B.PPSDIV) #endif //! @brief Format value for bitfield CMT_PPS_PPSDIV. #define BF_CMT_PPS_PPSDIV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_PPS_PPSDIV), uint8_t) & BM_CMT_PPS_PPSDIV) #ifndef __LANGUAGE_ASM__ //! @brief Set the PPSDIV field to a new value. #define BW_CMT_PPS_PPSDIV(v) (HW_CMT_PPS_WR((HW_CMT_PPS_RD() & ~BM_CMT_PPS_PPSDIV) | BF_CMT_PPS_PPSDIV(v))) #endif //@} //------------------------------------------------------------------------------------------- // HW_CMT_DMA - CMT Direct Memory Access Register //------------------------------------------------------------------------------------------- #ifndef __LANGUAGE_ASM__ /*! * @brief HW_CMT_DMA - CMT Direct Memory Access Register (RW) * * Reset value: 0x00U * * This register is used to enable/disable direct memory access (DMA). */ typedef union _hw_cmt_dma { uint8_t U; struct _hw_cmt_dma_bitfields { uint8_t DMAb : 1; //!< [0] DMA Enable uint8_t RESERVED0 : 7; //!< [7:1] } B; } hw_cmt_dma_t; #endif /*! * @name Constants and macros for entire CMT_DMA register */ //@{ #define HW_CMT_DMA_ADDR (REGS_CMT_BASE + 0xBU) #ifndef __LANGUAGE_ASM__ #define HW_CMT_DMA (*(__IO hw_cmt_dma_t *) HW_CMT_DMA_ADDR) #define HW_CMT_DMA_RD() (HW_CMT_DMA.U) #define HW_CMT_DMA_WR(v) (HW_CMT_DMA.U = (v)) #define HW_CMT_DMA_SET(v) (HW_CMT_DMA_WR(HW_CMT_DMA_RD() | (v))) #define HW_CMT_DMA_CLR(v) (HW_CMT_DMA_WR(HW_CMT_DMA_RD() & ~(v))) #define HW_CMT_DMA_TOG(v) (HW_CMT_DMA_WR(HW_CMT_DMA_RD() ^ (v))) #endif //@} /* * Constants & macros for individual CMT_DMA bitfields */ /*! * @name Register CMT_DMA, field DMA[0] (RW) * * Enables the DMA protocol. * * Values: * - 0 - DMA transfer request and done are disabled. * - 1 - DMA transfer request and done are enabled. */ //@{ #define BP_CMT_DMA_DMA (0U) //!< Bit position for CMT_DMA_DMA. #define BM_CMT_DMA_DMA (0x01U) //!< Bit mask for CMT_DMA_DMA. #define BS_CMT_DMA_DMA (1U) //!< Bit field size in bits for CMT_DMA_DMA. #ifndef __LANGUAGE_ASM__ //! @brief Read current value of the CMT_DMA_DMA field. #define BR_CMT_DMA_DMA (BITBAND_ACCESS8(HW_CMT_DMA_ADDR, BP_CMT_DMA_DMA)) #endif //! @brief Format value for bitfield CMT_DMA_DMA. #define BF_CMT_DMA_DMA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_DMA_DMA), uint8_t) & BM_CMT_DMA_DMA) #ifndef __LANGUAGE_ASM__ //! @brief Set the DMA field to a new value. #define BW_CMT_DMA_DMA(v) (BITBAND_ACCESS8(HW_CMT_DMA_ADDR, BP_CMT_DMA_DMA) = (v)) #endif //@} //------------------------------------------------------------------------------------------- // hw_cmt_t - module struct //------------------------------------------------------------------------------------------- /*! * @brief All CMT module registers. */ #ifndef __LANGUAGE_ASM__ #pragma pack(1) typedef struct _hw_cmt { __IO hw_cmt_cgh1_t CGH1; //!< [0x0] CMT Carrier Generator High Data Register 1 __IO hw_cmt_cgl1_t CGL1; //!< [0x1] CMT Carrier Generator Low Data Register 1 __IO hw_cmt_cgh2_t CGH2; //!< [0x2] CMT Carrier Generator High Data Register 2 __IO hw_cmt_cgl2_t CGL2; //!< [0x3] CMT Carrier Generator Low Data Register 2 __IO hw_cmt_oc_t OC; //!< [0x4] CMT Output Control Register __IO hw_cmt_msc_t MSC; //!< [0x5] CMT Modulator Status and Control Register __IO hw_cmt_cmd1_t CMD1; //!< [0x6] CMT Modulator Data Register Mark High __IO hw_cmt_cmd2_t CMD2; //!< [0x7] CMT Modulator Data Register Mark Low __IO hw_cmt_cmd3_t CMD3; //!< [0x8] CMT Modulator Data Register Space High __IO hw_cmt_cmd4_t CMD4; //!< [0x9] CMT Modulator Data Register Space Low __IO hw_cmt_pps_t PPS; //!< [0xA] CMT Primary Prescaler Register __IO hw_cmt_dma_t DMA; //!< [0xB] CMT Direct Memory Access Register } hw_cmt_t; #pragma pack() //! @brief Macro to access all CMT registers. //! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, //! use the '&' operator, like <code>&HW_CMT</code>. #define HW_CMT (*(hw_cmt_t *) REGS_CMT_BASE) #endif #endif // __HW_CMT_REGISTERS_H__ // v22/130726/0.9 // EOF