mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_ltdc.c
- Committer:
- mbed_official
- Date:
- 2014-02-08
- Revision:
- 87:085cde657901
- Child:
- 106:ced8cbb51063
File content as of revision 87:085cde657901:
/** ****************************************************************************** * @file stm32f4xx_hal_ltdc.c * @author MCD Application Team * @version V1.0.0RC2 * @date 04-February-2014 * @brief LTDC HAL module driver. * This file provides firmware functions to manage the following * functionalities of the LTDC peripheral: * + Initialization and de-initialization functions * + IO operation functions * + Peripheral Control functions * + Peripheral State and Errors functions * @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] (#) Program the required configuration through following parameters: the LTDC timing, the horizontal and vertical polarity, the pixel clock polarity, Data Enable polarity and the LTDC background color value using HAL_LTDC_Init() function (#) Program the required configuration through following parameters: the pixel format, the blending factors, input alpha value, the window size and the image size using HAL_LTDC_ConfigLayer() function for foreground or/and background layer. (#) Optionally, configure and enable the CLUT using HAL_LTDC_ConfigCLUT() and HAL_LTDC_EnableCLUT functions. (#) Optionally, enable the Dither using HAL_LTDC_EnableDither(). (#) Optionally, configure and enable the Color keying using HAL_LTDC_ConfigColorKeying() and HAL_LTDC_EnableColorKeying functions. (#) Optionally, configure LineInterrupt using HAL_LTDC_ProgramLineInterrupt() function (#) If needed, Reconfigure and change the pixel format value, the alpha value value, the window size, the window position and the layer start address for foreground or/and background layer using respectively the following functions: HAL_LTDC_SetPixelFormat(), HAL_LTDC_SetAlpha(), HAL_LTDC_SetWindowSize(), HAL_LTDC_SetWindowPosition(), HAL_LTDC_SetAddress. (#) To control LTDC state you can use the following function: HAL_LTDC_GetState() *** LTDC HAL driver macros list *** ============================================= [..] Below the list of most used macros in LTDC HAL driver. (+) __HAL_LTDC_ENABLE: Enable the LTDC. (+) __HAL_LTDC_DISABLE: Disable the LTDC. (+) __HAL_LTDC_LAYER_ENABLE: Enable the LTDC Layer. (+) __HAL_LTDC_LAYER_DISABLE: Disable the LTDC Layer. (+) __HAL_LTDC_RELOAD_CONFIG: Reload Layer Configuration. (+) __HAL_LTDC_GET_FLAG: Get the LTDC pending flags. (+) __HAL_LTDC_CLEAR_FLAG: Clears the LTDC pending flags. (+) __HAL_LTDC_ENABLE_IT: Enables the specified LTDC interrupts. (+) __HAL_LTDC_DISABLE_IT: Disables the specified LTDC interrupts. (+) __HAL_LTDC_IT_STATUS: Checks whether the specified LTDC interrupt has occurred or not. [..] (@) You can refer to the LTDC HAL driver header file for more useful macros @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @defgroup LTDC * @brief LTDC HAL module driver * @{ */ #ifdef HAL_LTDC_MODULE_ENABLED #if defined(STM32F429xx) || defined(STM32F439xx) /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx); /* Private functions ---------------------------------------------------------*/ /** @defgroup LTDC_Private_Functions * @{ */ /** @defgroup LTDC_Group1 Initialization and Configuration functions * @brief Initialization and Configuration functions * @verbatim =============================================================================== ##### Initialization and Configuration functions ##### =============================================================================== [..] This section provides functions allowing to: (+) Initialize and configure the LTDC (+) De-initialize the LTDC @endverbatim * @{ */ /** * @brief Initializes the LTDC according to the specified * parameters in the LTDC_InitTypeDef and create the associated handle. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval HAL status */ HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc) { uint32_t tmp = 0, tmp1 = 0; /* Check the LTDC peripheral state */ if(hltdc == NULL) { return HAL_ERROR; } /* Check function parameters */ assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance)); assert_param(IS_LTDC_HSYNC(hltdc->Init.HorizontalSync)); assert_param(IS_LTDC_VSYNC(hltdc->Init.VerticalSync)); assert_param(IS_LTDC_AHBP(hltdc->Init.AccumulatedHBP)); assert_param(IS_LTDC_AVBP(hltdc->Init.AccumulatedVBP)); assert_param(IS_LTDC_AAH(hltdc->Init.AccumulatedActiveH)); assert_param(IS_LTDC_AAW(hltdc->Init.AccumulatedActiveW)); assert_param(IS_LTDC_TOTALH(hltdc->Init.TotalHeigh)); assert_param(IS_LTDC_TOTALW(hltdc->Init.TotalWidth)); assert_param(IS_LTDC_HSPOL(hltdc->Init.HSPolarity)); assert_param(IS_LTDC_VSPOL(hltdc->Init.VSPolarity)); assert_param(IS_LTDC_DEPOL(hltdc->Init.DEPolarity)); assert_param(IS_LTDC_PCPOL(hltdc->Init.PCPolarity)); if(hltdc->State == HAL_LTDC_STATE_RESET) { /* Init the low level hardware */ HAL_LTDC_MspInit(hltdc); } /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Configures the HS, VS, DE and PC polarity */ hltdc->Instance->GCR &= ~(LTDC_GCR_HSPOL | LTDC_GCR_VSPOL | LTDC_GCR_DEPOL | LTDC_GCR_PCPOL); hltdc->Instance->GCR |= (uint32_t)(hltdc->Init.HSPolarity | hltdc->Init.VSPolarity | \ hltdc->Init.DEPolarity | hltdc->Init.PCPolarity); /* Sets Synchronization size */ hltdc->Instance->SSCR &= ~(LTDC_SSCR_VSH | LTDC_SSCR_HSW); tmp = (hltdc->Init.HorizontalSync << 16); hltdc->Instance->SSCR |= (tmp | hltdc->Init.VerticalSync); /* Sets Accumulated Back porch */ hltdc->Instance->BPCR &= ~(LTDC_BPCR_AVBP | LTDC_BPCR_AHBP); tmp = (hltdc->Init.AccumulatedHBP << 16); hltdc->Instance->BPCR |= (tmp | hltdc->Init.AccumulatedVBP); /* Sets Accumulated Active Width */ hltdc->Instance->AWCR &= ~(LTDC_AWCR_AAH | LTDC_AWCR_AAW); tmp = (hltdc->Init.AccumulatedActiveW << 16); hltdc->Instance->AWCR |= (tmp | hltdc->Init.AccumulatedActiveH); /* Sets Total Width */ hltdc->Instance->TWCR &= ~(LTDC_TWCR_TOTALH | LTDC_TWCR_TOTALW); tmp = (hltdc->Init.TotalWidth << 16); hltdc->Instance->TWCR |= (tmp | hltdc->Init.TotalHeigh); /* Sets the background color value */ tmp = ((uint32_t)(hltdc->Init.Backcolor.Green) << 8); tmp1 = ((uint32_t)(hltdc->Init.Backcolor.Red) << 16); hltdc->Instance->BCCR &= ~(LTDC_BCCR_BCBLUE | LTDC_BCCR_BCGREEN | LTDC_BCCR_BCRED); hltdc->Instance->BCCR |= (tmp1 | tmp | hltdc->Init.Backcolor.Blue); /* Enable the transfer Error interrupt */ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_TE); /* Enable the FIFO underrun interrupt */ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_FU); /* Enable LTDC by setting LTDCEN bit */ __HAL_LTDC_ENABLE(hltdc); /* Initialise the error code */ hltdc->ErrorCode = HAL_LTDC_ERROR_NONE; /* Initialize the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; return HAL_OK; } /** * @brief Deinitializes the LTDC peripheral registers to their default reset * values. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval None */ HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc) { /* DeInit the low level hardware */ HAL_LTDC_MspDeInit(hltdc); /* Initialise the error code */ hltdc->ErrorCode = HAL_LTDC_ERROR_NONE; /* Initialize the LTDC state*/ hltdc->State = HAL_LTDC_STATE_RESET; return HAL_OK; } /** * @brief Initializes the LTDC MSP. * @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval None */ __weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_LTDC_MspInit could be implemented in the user file */ } /** * @brief DeInitializes the LTDC MSP. * @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval None */ __weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_LTDC_MspDeInit could be implemented in the user file */ } /** * @} */ /** @defgroup LTDC_Group2 IO operation functions * @brief IO operation functions * @verbatim =============================================================================== ##### IO operation functions ##### =============================================================================== [..] This section provides function allowing to: (+) Handle LTDC interrupt request @endverbatim * @{ */ /** * @brief Handles LTDC interrupt request. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval HAL status */ void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc) { /* Transfer Error Interrupt management ***************************************/ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_TE) != RESET) { if(__HAL_LTDC_IT_STATUS(hltdc, LTDC_IT_TE) != RESET) { /* Disable the transfer Error interrupt */ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE); /* Clear the transfer error flag */ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_TE); /* Update error code */ hltdc->ErrorCode |= HAL_LTDC_ERROR_TE; /* Change LTDC state */ hltdc->State = HAL_LTDC_STATE_ERROR; /* Process unlocked */ __HAL_UNLOCK(hltdc); /* Transfer error Callback */ HAL_LTDC_ErrorCallback(hltdc); } } /* FIFO underrun Interrupt management ***************************************/ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_FU) != RESET) { if(__HAL_LTDC_IT_STATUS(hltdc, LTDC_IT_FU) != RESET) { /* Disable the FIFO underrun interrupt */ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU); /* Clear the FIFO underrun flag */ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_FU); /* Update error code */ hltdc->ErrorCode |= HAL_LTDC_ERROR_FU; /* Change LTDC state */ hltdc->State = HAL_LTDC_STATE_ERROR; /* Process unlocked */ __HAL_UNLOCK(hltdc); /* Transfer error Callback */ HAL_LTDC_ErrorCallback(hltdc); } } /* Line Interrupt management ************************************************/ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_LI) != RESET) { if(__HAL_LTDC_IT_STATUS(hltdc, LTDC_IT_LI) != RESET) { /* Disable the Line interrupt */ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI); /* Clear the Line interrupt flag */ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_LI); /* Change LTDC state */ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); /* Line interrupt Callback */ HAL_LTDC_LineEvenCallback(hltdc); } } } /** * @brief Error LTDC callback. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval None */ __weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_LTDC_ErrorCallback could be implemented in the user file */ } /** * @brief Line Event callback. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval None */ __weak void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_LTDC_LineEvenCallback could be implemented in the user file */ } /** * @} */ /** @defgroup LTDC_Group3 Peripheral Control functions * @brief Peripheral Control functions * @verbatim =============================================================================== ##### Peripheral Control functions ##### =============================================================================== [..] This section provides functions allowing to: (+) Configure the LTDC foreground or/and background parameters. (+) Set the active layer. (+) Configure the color keying. (+) Configure the C-LUT. (+) Enable / Disable the color keying. (+) Enable / Disable the C-LUT. (+) Update the layer position. (+) Update the layer size. (+) update pixel format on the fly the. (+) update transparency on the fly the. (+) update address on the fly. @endverbatim * @{ */ /** * @brief Configure the LTDC Layer according to the specified * parameters in the LTDC_InitTypeDef and create the associated handle. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param pLayerCfg: pointer to a LTDC_LayerCfgTypeDef structure that contains * the configuration information for the Layer. * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval HAL status */ HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx) { /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat)); assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1)); assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2)); assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0)); assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1)); assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0)); assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1)); assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0)); assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth)); assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight)); /* Copy new layer configuration into handle structure */ hltdc->LayerCfg[LayerIdx] = *pLayerCfg; /* Configure the LTDC Layer */ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Initialize the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Configure the color keying. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param RGBValue: the color key value * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval None */ HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx) { /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); /* Configures the default color values */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED); __HAL_LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue; /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Load the color lookup table. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param pCLUT: pointer to the color lookup table address. * @param CLUTSize: the color lookup table size. * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval None */ HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx) { uint32_t tmp = 0; uint32_t counter = 0; uint32_t pcounter = 0; /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); for(counter = 0; (counter < CLUTSize); counter++) { tmp = ((counter << 24) | ((uint32_t)(*pCLUT) & 0xFF) | ((uint32_t)(*pCLUT) & 0xFF00) | ((uint32_t)(*pCLUT) & 0xFF0000)); pcounter = (uint32_t)pCLUT + sizeof(*pCLUT); pCLUT = (uint32_t *)pcounter; /* Specifies the C-LUT address and RGB value */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CLUTWR = tmp; } /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Enable the color keying. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval None */ HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) { /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); /* Enable LTDC color keying by setting COLKEN bit */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN; /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Disable the color keying. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval None */ HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) { /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); /* Disable LTDC color keying by setting COLKEN bit */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN; /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Enable the color lookup table. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval None */ HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) { /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); /* Disable LTDC color lookup table by setting CLUTEN bit */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN; /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Disable the color lookup table. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval None */ HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) { /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); /* Disable LTDC color lookup table by setting CLUTEN bit */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN; /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Enables Dither. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval None */ HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc) { /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Enable Dither by setting DTEN bit */ LTDC->GCR |= (uint32_t)LTDC_GCR_DTEN; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Disables Dither. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval None */ HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc) { /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Disable Dither by setting DTEN bit */ LTDC->GCR &= ~(uint32_t)LTDC_GCR_DTEN; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Set the LTDC window size. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param XSize: LTDC Pixel per line * @param YSize: LTDC Line number * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval None */ HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx) { LTDC_LayerCfgTypeDef *pLayerCfg; /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Get layer configuration from handle structure */ pLayerCfg = &hltdc->LayerCfg[LayerIdx]; /* Check the parameters (Layers parameters)*/ assert_param(IS_LTDC_LAYER(LayerIdx)); assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0)); assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1)); assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0)); assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1)); assert_param(IS_LTDC_CFBLL(XSize)); assert_param(IS_LTDC_CFBLNBR(YSize)); /* update horizontal start/stop */ pLayerCfg->WindowX0 = 0; pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0; /* update vertical start/stop */ pLayerCfg->WindowY0 = 0; pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0; /* Reconfigures the color frame buffer pitch in byte */ pLayerCfg->ImageWidth = XSize; /* Reconfigures the frame buffer line number */ pLayerCfg->ImageHeight = YSize; /* Set LTDC parameters */ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Set the LTDC window position. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param X0: LTDC window X offset * @param Y0: LTDC window Y offset * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval None */ HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx) { LTDC_LayerCfgTypeDef *pLayerCfg; /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Get layer configuration from handle structure */ pLayerCfg = &hltdc->LayerCfg[LayerIdx]; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0)); assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1)); assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0)); assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1)); /* update horizontal start/stop */ pLayerCfg->WindowX0 = X0; pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth; /* update vertical start/stop */ pLayerCfg->WindowY0 = Y0; pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight; /* Set LTDC parameters */ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Reconfigure the pixel format. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param Pixelformat: new pixel format value. * @param LayerIdx: LTDC Layer index. * This parameter can be one of the following values: * 0 or 1. * @retval None */ HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx) { LTDC_LayerCfgTypeDef *pLayerCfg; /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat)); /* Get layer configuration from handle structure */ pLayerCfg = &hltdc->LayerCfg[LayerIdx]; /* Reconfigure the pixel format */ pLayerCfg->PixelFormat = Pixelformat; /* Set LTDC parameters */ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Reconfigure the layer alpha value. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param Alpha: new alpha value. * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: * 0 or 1 * @retval None */ HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx) { LTDC_LayerCfgTypeDef *pLayerCfg; /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_ALPHA(Alpha)); assert_param(IS_LTDC_LAYER(LayerIdx)); /* Get layer configuration from handle structure */ pLayerCfg = &hltdc->LayerCfg[LayerIdx]; /* Reconfigure the Alpha value */ pLayerCfg->Alpha = Alpha; /* Set LTDC parameters */ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Reconfigure the frame buffer Address. * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param Address: new address value. * @param LayerIdx: LTDC Layer index. * This parameter can be one of the following values: * 0 or 1. * @retval None */ HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx) { LTDC_LayerCfgTypeDef *pLayerCfg; /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LAYER(LayerIdx)); /* Get layer configuration from handle structure */ pLayerCfg = &hltdc->LayerCfg[LayerIdx]; /* Reconfigure the Address */ pLayerCfg->FBStartAdress = Address; /* Set LTDC parameters */ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); /* Sets the Reload type */ hltdc->Instance->SRCR = LTDC_SRCR_IMR; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @brief Define the position of the line interrupt . * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param Line: Line Interrupt Position. * @retval None */ HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line) { /* Process locked */ __HAL_LOCK(hltdc); /* Change LTDC peripheral state */ hltdc->State = HAL_LTDC_STATE_BUSY; /* Check the parameters */ assert_param(IS_LTDC_LIPOS(Line)); /* Enable the Line interrupt */ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_LI); /* Sets the Line Interrupt position */ LTDC->LIPCR = (uint32_t)Line; /* Change the LTDC state*/ hltdc->State = HAL_LTDC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hltdc); return HAL_OK; } /** * @} */ /** @defgroup LTDC_Group4 Peripheral State and Errors functions * @brief Peripheral State and Errors functions * @verbatim =============================================================================== ##### Peripheral State and Errors functions ##### =============================================================================== [..] This subsection provides functions allowing to (+) Check the LTDC state. (+) Get error code. @endverbatim * @{ */ /** * @brief Return the LTDC state * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval HAL state */ HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc) { return hltdc->State; } /** * @brief Return the LTDC error code * @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @retval LTDC Error Code */ uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc) { return hltdc->ErrorCode; } /** * @} */ /** * @brief Configures the LTDC peripheral * @param hltdc : Pointer to a LTDC_HandleTypeDef structure that contains * the configuration information for the LTDC. * @param pLayerCfg: Pointer LTDC Layer Configuration strusture * @param LayerIdx: LTDC Layer index * This parameter can be one of the following values: 0 or 1 * @retval None */ static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx) { uint32_t tmp = 0; uint32_t tmp1 = 0; uint32_t tmp2 = 0; /* Configures the horizontal start and stop position */ tmp = ((pLayerCfg->WindowX1 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16)) << 16); __HAL_LTDC_LAYER(hltdc, LayerIdx)->WHPCR &= ~(LTDC_LxWHPCR_WHSTPOS | LTDC_LxWHPCR_WHSPPOS); __HAL_LTDC_LAYER(hltdc, LayerIdx)->WHPCR = ((pLayerCfg->WindowX0 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16) + 1) | tmp); /* Configures the vertical start and stop position */ tmp = ((pLayerCfg->WindowY1 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP)) << 16); __HAL_LTDC_LAYER(hltdc, LayerIdx)->WVPCR &= ~(LTDC_LxWVPCR_WVSTPOS | LTDC_LxWVPCR_WVSPPOS); __HAL_LTDC_LAYER(hltdc, LayerIdx)->WVPCR = ((pLayerCfg->WindowY0 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP) + 1) | tmp); /* Specifies the pixel format */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->PFCR &= ~(LTDC_LxPFCR_PF); __HAL_LTDC_LAYER(hltdc, LayerIdx)->PFCR = (pLayerCfg->PixelFormat); /* Configures the default color values */ tmp = ((uint32_t)(pLayerCfg->Backcolor.Green) << 8); tmp1 = ((uint32_t)(pLayerCfg->Backcolor.Red) << 16); tmp2 = (pLayerCfg->Alpha0 << 24); __HAL_LTDC_LAYER(hltdc, LayerIdx)->DCCR &= ~(LTDC_LxDCCR_DCBLUE | LTDC_LxDCCR_DCGREEN | LTDC_LxDCCR_DCRED | LTDC_LxDCCR_DCALPHA); __HAL_LTDC_LAYER(hltdc, LayerIdx)->DCCR = (pLayerCfg->Backcolor.Blue | tmp | tmp1 | tmp2); /* Specifies the constant alpha value */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CACR &= ~(LTDC_LxCACR_CONSTA); __HAL_LTDC_LAYER(hltdc, LayerIdx)->CACR = (pLayerCfg->Alpha); /* Specifies the blending factors */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->BFCR &= ~(LTDC_LxBFCR_BF2 | LTDC_LxBFCR_BF1); __HAL_LTDC_LAYER(hltdc, LayerIdx)->BFCR = (pLayerCfg->BlendingFactor1 | pLayerCfg->BlendingFactor2); /* Configures the color frame buffer start address */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD); __HAL_LTDC_LAYER(hltdc, LayerIdx)->CFBAR = (pLayerCfg->FBStartAdress); if(pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) { tmp = 4; } else if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB888) { tmp = 3; } else if((pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_AL88)) { tmp = 2; } else { tmp = 1; } /* Configures the color frame buffer pitch in byte */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~(LTDC_LxCFBLR_CFBLL | LTDC_LxCFBLR_CFBP); __HAL_LTDC_LAYER(hltdc, LayerIdx)->CFBLR = (((pLayerCfg->ImageWidth * tmp) << 16) | ((pLayerCfg->ImageWidth * tmp) + 3)); /* Configures the frame buffer line number */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CFBLNR &= ~(LTDC_LxCFBLNR_CFBLNBR); __HAL_LTDC_LAYER(hltdc, LayerIdx)->CFBLNR = (pLayerCfg->ImageHeight); /* Enable LTDC_Layer by setting LEN bit */ __HAL_LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_LEN; } /** * @} */ #endif /* STM32F429xx || STM32F439xx */ #endif /* HAL_LTDC_MODULE_ENABLED */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/