mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_ftm.h
- Revision:
- 146:f64d43ff0c18
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_ftm.h Wed Apr 02 21:00:08 2014 +0100 @@ -0,0 +1,6616 @@ +/* + * Copyright (c) 2014, Freescale Semiconductor, Inc. + * All rights reserved. + * + * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_FTM_REGISTERS_H__ +#define __HW_FTM_REGISTERS_H__ + +#include "regs.h" + +/* + * MK64F12 FTM + * + * FlexTimer Module + * + * Registers defined in this header file: + * - HW_FTM_SC - Status And Control + * - HW_FTM_CNT - Counter + * - HW_FTM_MOD - Modulo + * - HW_FTM_CnSC - Channel (n) Status And Control + * - HW_FTM_CnV - Channel (n) Value + * - HW_FTM_CNTIN - Counter Initial Value + * - HW_FTM_STATUS - Capture And Compare Status + * - HW_FTM_MODE - Features Mode Selection + * - HW_FTM_SYNC - Synchronization + * - HW_FTM_OUTINIT - Initial State For Channels Output + * - HW_FTM_OUTMASK - Output Mask + * - HW_FTM_COMBINE - Function For Linked Channels + * - HW_FTM_DEADTIME - Deadtime Insertion Control + * - HW_FTM_EXTTRIG - FTM External Trigger + * - HW_FTM_POL - Channels Polarity + * - HW_FTM_FMS - Fault Mode Status + * - HW_FTM_FILTER - Input Capture Filter Control + * - HW_FTM_FLTCTRL - Fault Control + * - HW_FTM_QDCTRL - Quadrature Decoder Control And Status + * - HW_FTM_CONF - Configuration + * - HW_FTM_FLTPOL - FTM Fault Input Polarity + * - HW_FTM_SYNCONF - Synchronization Configuration + * - HW_FTM_INVCTRL - FTM Inverting Control + * - HW_FTM_SWOCTRL - FTM Software Output Control + * - HW_FTM_PWMLOAD - FTM PWM Load + * + * - hw_ftm_t - Struct containing all module registers. + */ + +//! @name Module base addresses +//@{ +#ifndef REGS_FTM_BASE +#define HW_FTM_INSTANCE_COUNT (4U) //!< Number of instances of the FTM module. +#define HW_FTM0 (0U) //!< Instance number for FTM0. +#define HW_FTM1 (1U) //!< Instance number for FTM1. +#define HW_FTM2 (2U) //!< Instance number for FTM2. +#define HW_FTM3 (3U) //!< Instance number for FTM3. +#define REGS_FTM0_BASE (0x40038000U) //!< Base address for FTM0. +#define REGS_FTM1_BASE (0x40039000U) //!< Base address for FTM1. +#define REGS_FTM2_BASE (0x4003A000U) //!< Base address for FTM2. +#define REGS_FTM3_BASE (0x400B9000U) //!< Base address for FTM3. + +//! @brief Table of base addresses for FTM instances. +static const uint32_t __g_regs_FTM_base_addresses[] = { + REGS_FTM0_BASE, + REGS_FTM1_BASE, + REGS_FTM2_BASE, + REGS_FTM3_BASE, + }; + +//! @brief Get the base address of FTM by instance number. +//! @param x FTM instance number, from 0 through 3. +#define REGS_FTM_BASE(x) (__g_regs_FTM_base_addresses[(x)]) + +//! @brief Get the instance number given a base address. +//! @param b Base address for an instance of FTM. +#define REGS_FTM_INSTANCE(b) ((b) == REGS_FTM0_BASE ? HW_FTM0 : (b) == REGS_FTM1_BASE ? HW_FTM1 : (b) == REGS_FTM2_BASE ? HW_FTM2 : (b) == REGS_FTM3_BASE ? HW_FTM3 : 0) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_SC - Status And Control +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_SC - Status And Control (RW) + * + * Reset value: 0x00000000U + * + * SC contains the overflow status flag and control bits used to configure the + * interrupt enable, FTM configuration, clock source, and prescaler factor. These + * controls relate to all channels within this module. + */ +typedef union _hw_ftm_sc +{ + uint32_t U; + struct _hw_ftm_sc_bitfields + { + uint32_t PS : 3; //!< [2:0] Prescale Factor Selection + uint32_t CLKS : 2; //!< [4:3] Clock Source Selection + uint32_t CPWMS : 1; //!< [5] Center-Aligned PWM Select + uint32_t TOIE : 1; //!< [6] Timer Overflow Interrupt Enable + uint32_t TOF : 1; //!< [7] Timer Overflow Flag + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_sc_t; +#endif + +/*! + * @name Constants and macros for entire FTM_SC register + */ +//@{ +#define HW_FTM_SC_ADDR(x) (REGS_FTM_BASE(x) + 0x0U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_SC(x) (*(__IO hw_ftm_sc_t *) HW_FTM_SC_ADDR(x)) +#define HW_FTM_SC_RD(x) (HW_FTM_SC(x).U) +#define HW_FTM_SC_WR(x, v) (HW_FTM_SC(x).U = (v)) +#define HW_FTM_SC_SET(x, v) (HW_FTM_SC_WR(x, HW_FTM_SC_RD(x) | (v))) +#define HW_FTM_SC_CLR(x, v) (HW_FTM_SC_WR(x, HW_FTM_SC_RD(x) & ~(v))) +#define HW_FTM_SC_TOG(x, v) (HW_FTM_SC_WR(x, HW_FTM_SC_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_SC bitfields + */ + +/*! + * @name Register FTM_SC, field PS[2:0] (RW) + * + * Selects one of 8 division factors for the clock source selected by CLKS. The + * new prescaler factor affects the clock source on the next system clock cycle + * after the new value is updated into the register bits. This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 000 - Divide by 1 + * - 001 - Divide by 2 + * - 010 - Divide by 4 + * - 011 - Divide by 8 + * - 100 - Divide by 16 + * - 101 - Divide by 32 + * - 110 - Divide by 64 + * - 111 - Divide by 128 + */ +//@{ +#define BP_FTM_SC_PS (0U) //!< Bit position for FTM_SC_PS. +#define BM_FTM_SC_PS (0x00000007U) //!< Bit mask for FTM_SC_PS. +#define BS_FTM_SC_PS (3U) //!< Bit field size in bits for FTM_SC_PS. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SC_PS field. +#define BR_FTM_SC_PS(x) (HW_FTM_SC(x).B.PS) +#endif + +//! @brief Format value for bitfield FTM_SC_PS. +#define BF_FTM_SC_PS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SC_PS), uint32_t) & BM_FTM_SC_PS) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PS field to a new value. +#define BW_FTM_SC_PS(x, v) (HW_FTM_SC_WR(x, (HW_FTM_SC_RD(x) & ~BM_FTM_SC_PS) | BF_FTM_SC_PS(v))) +#endif +//@} + +/*! + * @name Register FTM_SC, field CLKS[4:3] (RW) + * + * Selects one of the three FTM counter clock sources. This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 00 - No clock selected. This in effect disables the FTM counter. + * - 01 - System clock + * - 10 - Fixed frequency clock + * - 11 - External clock + */ +//@{ +#define BP_FTM_SC_CLKS (3U) //!< Bit position for FTM_SC_CLKS. +#define BM_FTM_SC_CLKS (0x00000018U) //!< Bit mask for FTM_SC_CLKS. +#define BS_FTM_SC_CLKS (2U) //!< Bit field size in bits for FTM_SC_CLKS. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SC_CLKS field. +#define BR_FTM_SC_CLKS(x) (HW_FTM_SC(x).B.CLKS) +#endif + +//! @brief Format value for bitfield FTM_SC_CLKS. +#define BF_FTM_SC_CLKS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SC_CLKS), uint32_t) & BM_FTM_SC_CLKS) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CLKS field to a new value. +#define BW_FTM_SC_CLKS(x, v) (HW_FTM_SC_WR(x, (HW_FTM_SC_RD(x) & ~BM_FTM_SC_CLKS) | BF_FTM_SC_CLKS(v))) +#endif +//@} + +/*! + * @name Register FTM_SC, field CPWMS[5] (RW) + * + * Selects CPWM mode. This mode configures the FTM to operate in Up-Down + * Counting mode. This field is write protected. It can be written only when MODE[WPDIS] + * = 1. + * + * Values: + * - 0 - FTM counter operates in Up Counting mode. + * - 1 - FTM counter operates in Up-Down Counting mode. + */ +//@{ +#define BP_FTM_SC_CPWMS (5U) //!< Bit position for FTM_SC_CPWMS. +#define BM_FTM_SC_CPWMS (0x00000020U) //!< Bit mask for FTM_SC_CPWMS. +#define BS_FTM_SC_CPWMS (1U) //!< Bit field size in bits for FTM_SC_CPWMS. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SC_CPWMS field. +#define BR_FTM_SC_CPWMS(x) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_CPWMS)) +#endif + +//! @brief Format value for bitfield FTM_SC_CPWMS. +#define BF_FTM_SC_CPWMS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SC_CPWMS), uint32_t) & BM_FTM_SC_CPWMS) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CPWMS field to a new value. +#define BW_FTM_SC_CPWMS(x, v) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_CPWMS) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SC, field TOIE[6] (RW) + * + * Enables FTM overflow interrupts. + * + * Values: + * - 0 - Disable TOF interrupts. Use software polling. + * - 1 - Enable TOF interrupts. An interrupt is generated when TOF equals one. + */ +//@{ +#define BP_FTM_SC_TOIE (6U) //!< Bit position for FTM_SC_TOIE. +#define BM_FTM_SC_TOIE (0x00000040U) //!< Bit mask for FTM_SC_TOIE. +#define BS_FTM_SC_TOIE (1U) //!< Bit field size in bits for FTM_SC_TOIE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SC_TOIE field. +#define BR_FTM_SC_TOIE(x) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOIE)) +#endif + +//! @brief Format value for bitfield FTM_SC_TOIE. +#define BF_FTM_SC_TOIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SC_TOIE), uint32_t) & BM_FTM_SC_TOIE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TOIE field to a new value. +#define BW_FTM_SC_TOIE(x, v) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOIE) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SC, field TOF[7] (ROWZ) + * + * Set by hardware when the FTM counter passes the value in the MOD register. + * The TOF bit is cleared by reading the SC register while TOF is set and then + * writing a 0 to TOF bit. Writing a 1 to TOF has no effect. If another FTM overflow + * occurs between the read and write operations, the write operation has no + * effect; therefore, TOF remains set indicating an overflow has occurred. In this + * case, a TOF interrupt request is not lost due to the clearing sequence for a + * previous TOF. + * + * Values: + * - 0 - FTM counter has not overflowed. + * - 1 - FTM counter has overflowed. + */ +//@{ +#define BP_FTM_SC_TOF (7U) //!< Bit position for FTM_SC_TOF. +#define BM_FTM_SC_TOF (0x00000080U) //!< Bit mask for FTM_SC_TOF. +#define BS_FTM_SC_TOF (1U) //!< Bit field size in bits for FTM_SC_TOF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SC_TOF field. +#define BR_FTM_SC_TOF(x) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOF)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_CNT - Counter +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_CNT - Counter (RW) + * + * Reset value: 0x00000000U + * + * The CNT register contains the FTM counter value. Reset clears the CNT + * register. Writing any value to COUNT updates the counter with its initial value, + * CNTIN. When BDM is active, the FTM counter is frozen. This is the value that you + * may read. + */ +typedef union _hw_ftm_cnt +{ + uint32_t U; + struct _hw_ftm_cnt_bitfields + { + uint32_t COUNT : 16; //!< [15:0] Counter Value + uint32_t RESERVED0 : 16; //!< [31:16] + } B; +} hw_ftm_cnt_t; +#endif + +/*! + * @name Constants and macros for entire FTM_CNT register + */ +//@{ +#define HW_FTM_CNT_ADDR(x) (REGS_FTM_BASE(x) + 0x4U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_CNT(x) (*(__IO hw_ftm_cnt_t *) HW_FTM_CNT_ADDR(x)) +#define HW_FTM_CNT_RD(x) (HW_FTM_CNT(x).U) +#define HW_FTM_CNT_WR(x, v) (HW_FTM_CNT(x).U = (v)) +#define HW_FTM_CNT_SET(x, v) (HW_FTM_CNT_WR(x, HW_FTM_CNT_RD(x) | (v))) +#define HW_FTM_CNT_CLR(x, v) (HW_FTM_CNT_WR(x, HW_FTM_CNT_RD(x) & ~(v))) +#define HW_FTM_CNT_TOG(x, v) (HW_FTM_CNT_WR(x, HW_FTM_CNT_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_CNT bitfields + */ + +/*! + * @name Register FTM_CNT, field COUNT[15:0] (RW) + */ +//@{ +#define BP_FTM_CNT_COUNT (0U) //!< Bit position for FTM_CNT_COUNT. +#define BM_FTM_CNT_COUNT (0x0000FFFFU) //!< Bit mask for FTM_CNT_COUNT. +#define BS_FTM_CNT_COUNT (16U) //!< Bit field size in bits for FTM_CNT_COUNT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CNT_COUNT field. +#define BR_FTM_CNT_COUNT(x) (HW_FTM_CNT(x).B.COUNT) +#endif + +//! @brief Format value for bitfield FTM_CNT_COUNT. +#define BF_FTM_CNT_COUNT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CNT_COUNT), uint32_t) & BM_FTM_CNT_COUNT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COUNT field to a new value. +#define BW_FTM_CNT_COUNT(x, v) (HW_FTM_CNT_WR(x, (HW_FTM_CNT_RD(x) & ~BM_FTM_CNT_COUNT) | BF_FTM_CNT_COUNT(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_MOD - Modulo +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_MOD - Modulo (RW) + * + * Reset value: 0x00000000U + * + * The Modulo register contains the modulo value for the FTM counter. After the + * FTM counter reaches the modulo value, the overflow flag (TOF) becomes set at + * the next clock, and the next value of FTM counter depends on the selected + * counting method; see Counter. Writing to the MOD register latches the value into a + * buffer. The MOD register is updated with the value of its write buffer + * according to Registers updated from write buffers. If FTMEN = 0, this write coherency + * mechanism may be manually reset by writing to the SC register whether BDM is + * active or not. Initialize the FTM counter, by writing to CNT, before writing + * to the MOD register to avoid confusion about when the first counter overflow + * will occur. + */ +typedef union _hw_ftm_mod +{ + uint32_t U; + struct _hw_ftm_mod_bitfields + { + uint32_t MOD : 16; //!< [15:0] + uint32_t RESERVED0 : 16; //!< [31:16] + } B; +} hw_ftm_mod_t; +#endif + +/*! + * @name Constants and macros for entire FTM_MOD register + */ +//@{ +#define HW_FTM_MOD_ADDR(x) (REGS_FTM_BASE(x) + 0x8U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_MOD(x) (*(__IO hw_ftm_mod_t *) HW_FTM_MOD_ADDR(x)) +#define HW_FTM_MOD_RD(x) (HW_FTM_MOD(x).U) +#define HW_FTM_MOD_WR(x, v) (HW_FTM_MOD(x).U = (v)) +#define HW_FTM_MOD_SET(x, v) (HW_FTM_MOD_WR(x, HW_FTM_MOD_RD(x) | (v))) +#define HW_FTM_MOD_CLR(x, v) (HW_FTM_MOD_WR(x, HW_FTM_MOD_RD(x) & ~(v))) +#define HW_FTM_MOD_TOG(x, v) (HW_FTM_MOD_WR(x, HW_FTM_MOD_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_MOD bitfields + */ + +/*! + * @name Register FTM_MOD, field MOD[15:0] (RW) + * + * Modulo Value + */ +//@{ +#define BP_FTM_MOD_MOD (0U) //!< Bit position for FTM_MOD_MOD. +#define BM_FTM_MOD_MOD (0x0000FFFFU) //!< Bit mask for FTM_MOD_MOD. +#define BS_FTM_MOD_MOD (16U) //!< Bit field size in bits for FTM_MOD_MOD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_MOD_MOD field. +#define BR_FTM_MOD_MOD(x) (HW_FTM_MOD(x).B.MOD) +#endif + +//! @brief Format value for bitfield FTM_MOD_MOD. +#define BF_FTM_MOD_MOD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_MOD_MOD), uint32_t) & BM_FTM_MOD_MOD) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the MOD field to a new value. +#define BW_FTM_MOD_MOD(x, v) (HW_FTM_MOD_WR(x, (HW_FTM_MOD_RD(x) & ~BM_FTM_MOD_MOD) | BF_FTM_MOD_MOD(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_CnSC - Channel (n) Status And Control +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_CnSC - Channel (n) Status And Control (RW) + * + * Reset value: 0x00000000U + * + * CnSC contains the channel-interrupt-status flag and control bits used to + * configure the interrupt enable, channel configuration, and pin function. Mode, + * edge, and level selection DECAPEN COMBINE CPWMS MSnB:MSnA ELSnB:ELSnA Mode + * Configuration X X X XX 0 Pin not used for FTM-revert the channel pin to general + * purpose I/O or other peripheral control 0 0 0 0 1 Input Capture Capture on Rising + * Edge Only 10 Capture on Falling Edge Only 11 Capture on Rising or Falling Edge + * 1 1 Output Compare Toggle Output on match 10 Clear Output on match 11 Set + * Output on match 1X 10 Edge-Aligned PWM High-true pulses (clear Output on match) + * X1 Low-true pulses (set Output on match) 1 XX 10 Center-Aligned PWM High-true + * pulses (clear Output on match-up) X1 Low-true pulses (set Output on match-up) 1 + * 0 XX 10 Combine PWM High-true pulses (set on channel (n) match, and clear on + * channel (n+1) match) X1 Low-true pulses (clear on channel (n) match, and set + * on channel (n+1) match) 1 0 0 X0 See the following table (#ModeSel2Table). Dual + * Edge Capture One-Shot Capture mode X1 Continuous Capture mode Dual Edge + * Capture mode - edge polarity selection ELSnB ELSnA Channel Port Enable Detected + * Edges 0 0 Disabled No edge 0 1 Enabled Rising edge 1 0 Enabled Falling edge 1 1 + * Enabled Rising and falling edges + */ +typedef union _hw_ftm_cnsc +{ + uint32_t U; + struct _hw_ftm_cnsc_bitfields + { + uint32_t DMAb : 1; //!< [0] DMA Enable + uint32_t RESERVED0 : 1; //!< [1] + uint32_t ELSA : 1; //!< [2] Edge or Level Select + uint32_t ELSB : 1; //!< [3] Edge or Level Select + uint32_t MSA : 1; //!< [4] Channel Mode Select + uint32_t MSB : 1; //!< [5] Channel Mode Select + uint32_t CHIE : 1; //!< [6] Channel Interrupt Enable + uint32_t CHF : 1; //!< [7] Channel Flag + uint32_t RESERVED1 : 24; //!< [31:8] + } B; +} hw_ftm_cnsc_t; +#endif + +/*! + * @name Constants and macros for entire FTM_CnSC register + */ +//@{ +#define HW_FTM_CnSC_COUNT (8U) + +#define HW_FTM_CnSC_ADDR(x, n) (REGS_FTM_BASE(x) + 0xCU + (0x8U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_CnSC(x, n) (*(__IO hw_ftm_cnsc_t *) HW_FTM_CnSC_ADDR(x, n)) +#define HW_FTM_CnSC_RD(x, n) (HW_FTM_CnSC(x, n).U) +#define HW_FTM_CnSC_WR(x, n, v) (HW_FTM_CnSC(x, n).U = (v)) +#define HW_FTM_CnSC_SET(x, n, v) (HW_FTM_CnSC_WR(x, n, HW_FTM_CnSC_RD(x, n) | (v))) +#define HW_FTM_CnSC_CLR(x, n, v) (HW_FTM_CnSC_WR(x, n, HW_FTM_CnSC_RD(x, n) & ~(v))) +#define HW_FTM_CnSC_TOG(x, n, v) (HW_FTM_CnSC_WR(x, n, HW_FTM_CnSC_RD(x, n) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_CnSC bitfields + */ + +/*! + * @name Register FTM_CnSC, field DMA[0] (RW) + * + * Enables DMA transfers for the channel. + * + * Values: + * - 0 - Disable DMA transfers. + * - 1 - Enable DMA transfers. + */ +//@{ +#define BP_FTM_CnSC_DMA (0U) //!< Bit position for FTM_CnSC_DMA. +#define BM_FTM_CnSC_DMA (0x00000001U) //!< Bit mask for FTM_CnSC_DMA. +#define BS_FTM_CnSC_DMA (1U) //!< Bit field size in bits for FTM_CnSC_DMA. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CnSC_DMA field. +#define BR_FTM_CnSC_DMA(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_DMA)) +#endif + +//! @brief Format value for bitfield FTM_CnSC_DMA. +#define BF_FTM_CnSC_DMA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CnSC_DMA), uint32_t) & BM_FTM_CnSC_DMA) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DMA field to a new value. +#define BW_FTM_CnSC_DMA(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_DMA) = (v)) +#endif +//@} + +/*! + * @name Register FTM_CnSC, field ELSA[2] (RW) + * + * The functionality of ELSB and ELSA depends on the channel mode. See + * #ModeSel1Table. This field is write protected. It can be written only when MODE[WPDIS] + * = 1. + */ +//@{ +#define BP_FTM_CnSC_ELSA (2U) //!< Bit position for FTM_CnSC_ELSA. +#define BM_FTM_CnSC_ELSA (0x00000004U) //!< Bit mask for FTM_CnSC_ELSA. +#define BS_FTM_CnSC_ELSA (1U) //!< Bit field size in bits for FTM_CnSC_ELSA. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CnSC_ELSA field. +#define BR_FTM_CnSC_ELSA(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSA)) +#endif + +//! @brief Format value for bitfield FTM_CnSC_ELSA. +#define BF_FTM_CnSC_ELSA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CnSC_ELSA), uint32_t) & BM_FTM_CnSC_ELSA) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ELSA field to a new value. +#define BW_FTM_CnSC_ELSA(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSA) = (v)) +#endif +//@} + +/*! + * @name Register FTM_CnSC, field ELSB[3] (RW) + * + * The functionality of ELSB and ELSA depends on the channel mode. See + * #ModeSel1Table. This field is write protected. It can be written only when MODE[WPDIS] + * = 1. + */ +//@{ +#define BP_FTM_CnSC_ELSB (3U) //!< Bit position for FTM_CnSC_ELSB. +#define BM_FTM_CnSC_ELSB (0x00000008U) //!< Bit mask for FTM_CnSC_ELSB. +#define BS_FTM_CnSC_ELSB (1U) //!< Bit field size in bits for FTM_CnSC_ELSB. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CnSC_ELSB field. +#define BR_FTM_CnSC_ELSB(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSB)) +#endif + +//! @brief Format value for bitfield FTM_CnSC_ELSB. +#define BF_FTM_CnSC_ELSB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CnSC_ELSB), uint32_t) & BM_FTM_CnSC_ELSB) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ELSB field to a new value. +#define BW_FTM_CnSC_ELSB(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSB) = (v)) +#endif +//@} + +/*! + * @name Register FTM_CnSC, field MSA[4] (RW) + * + * Used for further selections in the channel logic. Its functionality is + * dependent on the channel mode. See #ModeSel1Table. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + */ +//@{ +#define BP_FTM_CnSC_MSA (4U) //!< Bit position for FTM_CnSC_MSA. +#define BM_FTM_CnSC_MSA (0x00000010U) //!< Bit mask for FTM_CnSC_MSA. +#define BS_FTM_CnSC_MSA (1U) //!< Bit field size in bits for FTM_CnSC_MSA. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CnSC_MSA field. +#define BR_FTM_CnSC_MSA(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSA)) +#endif + +//! @brief Format value for bitfield FTM_CnSC_MSA. +#define BF_FTM_CnSC_MSA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CnSC_MSA), uint32_t) & BM_FTM_CnSC_MSA) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the MSA field to a new value. +#define BW_FTM_CnSC_MSA(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSA) = (v)) +#endif +//@} + +/*! + * @name Register FTM_CnSC, field MSB[5] (RW) + * + * Used for further selections in the channel logic. Its functionality is + * dependent on the channel mode. See #ModeSel1Table. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + */ +//@{ +#define BP_FTM_CnSC_MSB (5U) //!< Bit position for FTM_CnSC_MSB. +#define BM_FTM_CnSC_MSB (0x00000020U) //!< Bit mask for FTM_CnSC_MSB. +#define BS_FTM_CnSC_MSB (1U) //!< Bit field size in bits for FTM_CnSC_MSB. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CnSC_MSB field. +#define BR_FTM_CnSC_MSB(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSB)) +#endif + +//! @brief Format value for bitfield FTM_CnSC_MSB. +#define BF_FTM_CnSC_MSB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CnSC_MSB), uint32_t) & BM_FTM_CnSC_MSB) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the MSB field to a new value. +#define BW_FTM_CnSC_MSB(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSB) = (v)) +#endif +//@} + +/*! + * @name Register FTM_CnSC, field CHIE[6] (RW) + * + * Enables channel interrupts. + * + * Values: + * - 0 - Disable channel interrupts. Use software polling. + * - 1 - Enable channel interrupts. + */ +//@{ +#define BP_FTM_CnSC_CHIE (6U) //!< Bit position for FTM_CnSC_CHIE. +#define BM_FTM_CnSC_CHIE (0x00000040U) //!< Bit mask for FTM_CnSC_CHIE. +#define BS_FTM_CnSC_CHIE (1U) //!< Bit field size in bits for FTM_CnSC_CHIE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CnSC_CHIE field. +#define BR_FTM_CnSC_CHIE(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHIE)) +#endif + +//! @brief Format value for bitfield FTM_CnSC_CHIE. +#define BF_FTM_CnSC_CHIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CnSC_CHIE), uint32_t) & BM_FTM_CnSC_CHIE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CHIE field to a new value. +#define BW_FTM_CnSC_CHIE(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHIE) = (v)) +#endif +//@} + +/*! + * @name Register FTM_CnSC, field CHF[7] (ROWZ) + * + * Set by hardware when an event occurs on the channel. CHF is cleared by + * reading the CSC register while CHnF is set and then writing a 0 to the CHF bit. + * Writing a 1 to CHF has no effect. If another event occurs between the read and + * write operations, the write operation has no effect; therefore, CHF remains set + * indicating an event has occurred. In this case a CHF interrupt request is not + * lost due to the clearing sequence for a previous CHF. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +//@{ +#define BP_FTM_CnSC_CHF (7U) //!< Bit position for FTM_CnSC_CHF. +#define BM_FTM_CnSC_CHF (0x00000080U) //!< Bit mask for FTM_CnSC_CHF. +#define BS_FTM_CnSC_CHF (1U) //!< Bit field size in bits for FTM_CnSC_CHF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CnSC_CHF field. +#define BR_FTM_CnSC_CHF(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHF)) +#endif +//@} +//------------------------------------------------------------------------------------------- +// HW_FTM_CnV - Channel (n) Value +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_CnV - Channel (n) Value (RW) + * + * Reset value: 0x00000000U + * + * These registers contain the captured FTM counter value for the input modes or + * the match value for the output modes. In Input Capture, Capture Test, and + * Dual Edge Capture modes, any write to a CnV register is ignored. In output modes, + * writing to a CnV register latches the value into a buffer. A CnV register is + * updated with the value of its write buffer according to Registers updated from + * write buffers. If FTMEN = 0, this write coherency mechanism may be manually + * reset by writing to the CnSC register whether BDM mode is active or not. + */ +typedef union _hw_ftm_cnv +{ + uint32_t U; + struct _hw_ftm_cnv_bitfields + { + uint32_t VAL : 16; //!< [15:0] Channel Value + uint32_t RESERVED0 : 16; //!< [31:16] + } B; +} hw_ftm_cnv_t; +#endif + +/*! + * @name Constants and macros for entire FTM_CnV register + */ +//@{ +#define HW_FTM_CnV_COUNT (8U) + +#define HW_FTM_CnV_ADDR(x, n) (REGS_FTM_BASE(x) + 0x10U + (0x8U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_CnV(x, n) (*(__IO hw_ftm_cnv_t *) HW_FTM_CnV_ADDR(x, n)) +#define HW_FTM_CnV_RD(x, n) (HW_FTM_CnV(x, n).U) +#define HW_FTM_CnV_WR(x, n, v) (HW_FTM_CnV(x, n).U = (v)) +#define HW_FTM_CnV_SET(x, n, v) (HW_FTM_CnV_WR(x, n, HW_FTM_CnV_RD(x, n) | (v))) +#define HW_FTM_CnV_CLR(x, n, v) (HW_FTM_CnV_WR(x, n, HW_FTM_CnV_RD(x, n) & ~(v))) +#define HW_FTM_CnV_TOG(x, n, v) (HW_FTM_CnV_WR(x, n, HW_FTM_CnV_RD(x, n) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_CnV bitfields + */ + +/*! + * @name Register FTM_CnV, field VAL[15:0] (RW) + * + * Captured FTM counter value of the input modes or the match value for the + * output modes + */ +//@{ +#define BP_FTM_CnV_VAL (0U) //!< Bit position for FTM_CnV_VAL. +#define BM_FTM_CnV_VAL (0x0000FFFFU) //!< Bit mask for FTM_CnV_VAL. +#define BS_FTM_CnV_VAL (16U) //!< Bit field size in bits for FTM_CnV_VAL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CnV_VAL field. +#define BR_FTM_CnV_VAL(x, n) (HW_FTM_CnV(x, n).B.VAL) +#endif + +//! @brief Format value for bitfield FTM_CnV_VAL. +#define BF_FTM_CnV_VAL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CnV_VAL), uint32_t) & BM_FTM_CnV_VAL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the VAL field to a new value. +#define BW_FTM_CnV_VAL(x, n, v) (HW_FTM_CnV_WR(x, n, (HW_FTM_CnV_RD(x, n) & ~BM_FTM_CnV_VAL) | BF_FTM_CnV_VAL(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_CNTIN - Counter Initial Value +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_CNTIN - Counter Initial Value (RW) + * + * Reset value: 0x00000000U + * + * The Counter Initial Value register contains the initial value for the FTM + * counter. Writing to the CNTIN register latches the value into a buffer. The CNTIN + * register is updated with the value of its write buffer according to Registers + * updated from write buffers. When the FTM clock is initially selected, by + * writing a non-zero value to the CLKS bits, the FTM counter starts with the value + * 0x0000. To avoid this behavior, before the first write to select the FTM clock, + * write the new value to the the CNTIN register and then initialize the FTM + * counter by writing any value to the CNT register. + */ +typedef union _hw_ftm_cntin +{ + uint32_t U; + struct _hw_ftm_cntin_bitfields + { + uint32_t INIT : 16; //!< [15:0] + uint32_t RESERVED0 : 16; //!< [31:16] + } B; +} hw_ftm_cntin_t; +#endif + +/*! + * @name Constants and macros for entire FTM_CNTIN register + */ +//@{ +#define HW_FTM_CNTIN_ADDR(x) (REGS_FTM_BASE(x) + 0x4CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_CNTIN(x) (*(__IO hw_ftm_cntin_t *) HW_FTM_CNTIN_ADDR(x)) +#define HW_FTM_CNTIN_RD(x) (HW_FTM_CNTIN(x).U) +#define HW_FTM_CNTIN_WR(x, v) (HW_FTM_CNTIN(x).U = (v)) +#define HW_FTM_CNTIN_SET(x, v) (HW_FTM_CNTIN_WR(x, HW_FTM_CNTIN_RD(x) | (v))) +#define HW_FTM_CNTIN_CLR(x, v) (HW_FTM_CNTIN_WR(x, HW_FTM_CNTIN_RD(x) & ~(v))) +#define HW_FTM_CNTIN_TOG(x, v) (HW_FTM_CNTIN_WR(x, HW_FTM_CNTIN_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_CNTIN bitfields + */ + +/*! + * @name Register FTM_CNTIN, field INIT[15:0] (RW) + * + * Initial Value Of The FTM Counter + */ +//@{ +#define BP_FTM_CNTIN_INIT (0U) //!< Bit position for FTM_CNTIN_INIT. +#define BM_FTM_CNTIN_INIT (0x0000FFFFU) //!< Bit mask for FTM_CNTIN_INIT. +#define BS_FTM_CNTIN_INIT (16U) //!< Bit field size in bits for FTM_CNTIN_INIT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CNTIN_INIT field. +#define BR_FTM_CNTIN_INIT(x) (HW_FTM_CNTIN(x).B.INIT) +#endif + +//! @brief Format value for bitfield FTM_CNTIN_INIT. +#define BF_FTM_CNTIN_INIT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CNTIN_INIT), uint32_t) & BM_FTM_CNTIN_INIT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the INIT field to a new value. +#define BW_FTM_CNTIN_INIT(x, v) (HW_FTM_CNTIN_WR(x, (HW_FTM_CNTIN_RD(x) & ~BM_FTM_CNTIN_INIT) | BF_FTM_CNTIN_INIT(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_STATUS - Capture And Compare Status +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_STATUS - Capture And Compare Status (RW) + * + * Reset value: 0x00000000U + * + * The STATUS register contains a copy of the status flag CHnF bit in CnSC for + * each FTM channel for software convenience. Each CHnF bit in STATUS is a mirror + * of CHnF bit in CnSC. All CHnF bits can be checked using only one read of + * STATUS. All CHnF bits can be cleared by reading STATUS followed by writing 0x00 to + * STATUS. Hardware sets the individual channel flags when an event occurs on the + * channel. CHnF is cleared by reading STATUS while CHnF is set and then writing + * a 0 to the CHnF bit. Writing a 1 to CHnF has no effect. If another event + * occurs between the read and write operations, the write operation has no effect; + * therefore, CHnF remains set indicating an event has occurred. In this case, a + * CHnF interrupt request is not lost due to the clearing sequence for a previous + * CHnF. The STATUS register should be used only in Combine mode. + */ +typedef union _hw_ftm_status +{ + uint32_t U; + struct _hw_ftm_status_bitfields + { + uint32_t CH0F : 1; //!< [0] Channel 0 Flag + uint32_t CH1F : 1; //!< [1] Channel 1 Flag + uint32_t CH2F : 1; //!< [2] Channel 2 Flag + uint32_t CH3F : 1; //!< [3] Channel 3 Flag + uint32_t CH4F : 1; //!< [4] Channel 4 Flag + uint32_t CH5F : 1; //!< [5] Channel 5 Flag + uint32_t CH6F : 1; //!< [6] Channel 6 Flag + uint32_t CH7F : 1; //!< [7] Channel 7 Flag + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_status_t; +#endif + +/*! + * @name Constants and macros for entire FTM_STATUS register + */ +//@{ +#define HW_FTM_STATUS_ADDR(x) (REGS_FTM_BASE(x) + 0x50U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_STATUS(x) (*(__IO hw_ftm_status_t *) HW_FTM_STATUS_ADDR(x)) +#define HW_FTM_STATUS_RD(x) (HW_FTM_STATUS(x).U) +#define HW_FTM_STATUS_WR(x, v) (HW_FTM_STATUS(x).U = (v)) +#define HW_FTM_STATUS_SET(x, v) (HW_FTM_STATUS_WR(x, HW_FTM_STATUS_RD(x) | (v))) +#define HW_FTM_STATUS_CLR(x, v) (HW_FTM_STATUS_WR(x, HW_FTM_STATUS_RD(x) & ~(v))) +#define HW_FTM_STATUS_TOG(x, v) (HW_FTM_STATUS_WR(x, HW_FTM_STATUS_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_STATUS bitfields + */ + +/*! + * @name Register FTM_STATUS, field CH0F[0] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +//@{ +#define BP_FTM_STATUS_CH0F (0U) //!< Bit position for FTM_STATUS_CH0F. +#define BM_FTM_STATUS_CH0F (0x00000001U) //!< Bit mask for FTM_STATUS_CH0F. +#define BS_FTM_STATUS_CH0F (1U) //!< Bit field size in bits for FTM_STATUS_CH0F. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_STATUS_CH0F field. +#define BR_FTM_STATUS_CH0F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH0F)) +#endif + +//! @brief Format value for bitfield FTM_STATUS_CH0F. +#define BF_FTM_STATUS_CH0F(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_STATUS_CH0F), uint32_t) & BM_FTM_STATUS_CH0F) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH0F field to a new value. +#define BW_FTM_STATUS_CH0F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH0F) = (v)) +#endif +//@} + +/*! + * @name Register FTM_STATUS, field CH1F[1] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +//@{ +#define BP_FTM_STATUS_CH1F (1U) //!< Bit position for FTM_STATUS_CH1F. +#define BM_FTM_STATUS_CH1F (0x00000002U) //!< Bit mask for FTM_STATUS_CH1F. +#define BS_FTM_STATUS_CH1F (1U) //!< Bit field size in bits for FTM_STATUS_CH1F. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_STATUS_CH1F field. +#define BR_FTM_STATUS_CH1F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH1F)) +#endif + +//! @brief Format value for bitfield FTM_STATUS_CH1F. +#define BF_FTM_STATUS_CH1F(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_STATUS_CH1F), uint32_t) & BM_FTM_STATUS_CH1F) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH1F field to a new value. +#define BW_FTM_STATUS_CH1F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH1F) = (v)) +#endif +//@} + +/*! + * @name Register FTM_STATUS, field CH2F[2] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +//@{ +#define BP_FTM_STATUS_CH2F (2U) //!< Bit position for FTM_STATUS_CH2F. +#define BM_FTM_STATUS_CH2F (0x00000004U) //!< Bit mask for FTM_STATUS_CH2F. +#define BS_FTM_STATUS_CH2F (1U) //!< Bit field size in bits for FTM_STATUS_CH2F. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_STATUS_CH2F field. +#define BR_FTM_STATUS_CH2F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH2F)) +#endif + +//! @brief Format value for bitfield FTM_STATUS_CH2F. +#define BF_FTM_STATUS_CH2F(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_STATUS_CH2F), uint32_t) & BM_FTM_STATUS_CH2F) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH2F field to a new value. +#define BW_FTM_STATUS_CH2F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH2F) = (v)) +#endif +//@} + +/*! + * @name Register FTM_STATUS, field CH3F[3] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +//@{ +#define BP_FTM_STATUS_CH3F (3U) //!< Bit position for FTM_STATUS_CH3F. +#define BM_FTM_STATUS_CH3F (0x00000008U) //!< Bit mask for FTM_STATUS_CH3F. +#define BS_FTM_STATUS_CH3F (1U) //!< Bit field size in bits for FTM_STATUS_CH3F. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_STATUS_CH3F field. +#define BR_FTM_STATUS_CH3F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH3F)) +#endif + +//! @brief Format value for bitfield FTM_STATUS_CH3F. +#define BF_FTM_STATUS_CH3F(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_STATUS_CH3F), uint32_t) & BM_FTM_STATUS_CH3F) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH3F field to a new value. +#define BW_FTM_STATUS_CH3F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH3F) = (v)) +#endif +//@} + +/*! + * @name Register FTM_STATUS, field CH4F[4] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +//@{ +#define BP_FTM_STATUS_CH4F (4U) //!< Bit position for FTM_STATUS_CH4F. +#define BM_FTM_STATUS_CH4F (0x00000010U) //!< Bit mask for FTM_STATUS_CH4F. +#define BS_FTM_STATUS_CH4F (1U) //!< Bit field size in bits for FTM_STATUS_CH4F. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_STATUS_CH4F field. +#define BR_FTM_STATUS_CH4F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH4F)) +#endif + +//! @brief Format value for bitfield FTM_STATUS_CH4F. +#define BF_FTM_STATUS_CH4F(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_STATUS_CH4F), uint32_t) & BM_FTM_STATUS_CH4F) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH4F field to a new value. +#define BW_FTM_STATUS_CH4F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH4F) = (v)) +#endif +//@} + +/*! + * @name Register FTM_STATUS, field CH5F[5] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +//@{ +#define BP_FTM_STATUS_CH5F (5U) //!< Bit position for FTM_STATUS_CH5F. +#define BM_FTM_STATUS_CH5F (0x00000020U) //!< Bit mask for FTM_STATUS_CH5F. +#define BS_FTM_STATUS_CH5F (1U) //!< Bit field size in bits for FTM_STATUS_CH5F. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_STATUS_CH5F field. +#define BR_FTM_STATUS_CH5F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH5F)) +#endif + +//! @brief Format value for bitfield FTM_STATUS_CH5F. +#define BF_FTM_STATUS_CH5F(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_STATUS_CH5F), uint32_t) & BM_FTM_STATUS_CH5F) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH5F field to a new value. +#define BW_FTM_STATUS_CH5F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH5F) = (v)) +#endif +//@} + +/*! + * @name Register FTM_STATUS, field CH6F[6] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +//@{ +#define BP_FTM_STATUS_CH6F (6U) //!< Bit position for FTM_STATUS_CH6F. +#define BM_FTM_STATUS_CH6F (0x00000040U) //!< Bit mask for FTM_STATUS_CH6F. +#define BS_FTM_STATUS_CH6F (1U) //!< Bit field size in bits for FTM_STATUS_CH6F. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_STATUS_CH6F field. +#define BR_FTM_STATUS_CH6F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH6F)) +#endif + +//! @brief Format value for bitfield FTM_STATUS_CH6F. +#define BF_FTM_STATUS_CH6F(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_STATUS_CH6F), uint32_t) & BM_FTM_STATUS_CH6F) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH6F field to a new value. +#define BW_FTM_STATUS_CH6F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH6F) = (v)) +#endif +//@} + +/*! + * @name Register FTM_STATUS, field CH7F[7] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +//@{ +#define BP_FTM_STATUS_CH7F (7U) //!< Bit position for FTM_STATUS_CH7F. +#define BM_FTM_STATUS_CH7F (0x00000080U) //!< Bit mask for FTM_STATUS_CH7F. +#define BS_FTM_STATUS_CH7F (1U) //!< Bit field size in bits for FTM_STATUS_CH7F. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_STATUS_CH7F field. +#define BR_FTM_STATUS_CH7F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH7F)) +#endif + +//! @brief Format value for bitfield FTM_STATUS_CH7F. +#define BF_FTM_STATUS_CH7F(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_STATUS_CH7F), uint32_t) & BM_FTM_STATUS_CH7F) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH7F field to a new value. +#define BW_FTM_STATUS_CH7F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH7F) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_MODE - Features Mode Selection +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_MODE - Features Mode Selection (RW) + * + * Reset value: 0x00000004U + * + * This register contains the global enable bit for FTM-specific features and + * the control bits used to configure: Fault control mode and interrupt Capture + * Test mode PWM synchronization Write protection Channel output initialization + * These controls relate to all channels within this module. + */ +typedef union _hw_ftm_mode +{ + uint32_t U; + struct _hw_ftm_mode_bitfields + { + uint32_t FTMEN : 1; //!< [0] FTM Enable + uint32_t INIT : 1; //!< [1] Initialize The Channels Output + uint32_t WPDIS : 1; //!< [2] Write Protection Disable + uint32_t PWMSYNC : 1; //!< [3] PWM Synchronization Mode + uint32_t CAPTEST : 1; //!< [4] Capture Test Mode Enable + uint32_t FAULTM : 2; //!< [6:5] Fault Control Mode + uint32_t FAULTIE : 1; //!< [7] Fault Interrupt Enable + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_mode_t; +#endif + +/*! + * @name Constants and macros for entire FTM_MODE register + */ +//@{ +#define HW_FTM_MODE_ADDR(x) (REGS_FTM_BASE(x) + 0x54U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_MODE(x) (*(__IO hw_ftm_mode_t *) HW_FTM_MODE_ADDR(x)) +#define HW_FTM_MODE_RD(x) (HW_FTM_MODE(x).U) +#define HW_FTM_MODE_WR(x, v) (HW_FTM_MODE(x).U = (v)) +#define HW_FTM_MODE_SET(x, v) (HW_FTM_MODE_WR(x, HW_FTM_MODE_RD(x) | (v))) +#define HW_FTM_MODE_CLR(x, v) (HW_FTM_MODE_WR(x, HW_FTM_MODE_RD(x) & ~(v))) +#define HW_FTM_MODE_TOG(x, v) (HW_FTM_MODE_WR(x, HW_FTM_MODE_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_MODE bitfields + */ + +/*! + * @name Register FTM_MODE, field FTMEN[0] (RW) + * + * This field is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Only the TPM-compatible registers (first set of registers) can be used + * without any restriction. Do not use the FTM-specific registers. + * - 1 - All registers including the FTM-specific registers (second set of + * registers) are available for use with no restrictions. + */ +//@{ +#define BP_FTM_MODE_FTMEN (0U) //!< Bit position for FTM_MODE_FTMEN. +#define BM_FTM_MODE_FTMEN (0x00000001U) //!< Bit mask for FTM_MODE_FTMEN. +#define BS_FTM_MODE_FTMEN (1U) //!< Bit field size in bits for FTM_MODE_FTMEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_MODE_FTMEN field. +#define BR_FTM_MODE_FTMEN(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FTMEN)) +#endif + +//! @brief Format value for bitfield FTM_MODE_FTMEN. +#define BF_FTM_MODE_FTMEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_MODE_FTMEN), uint32_t) & BM_FTM_MODE_FTMEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FTMEN field to a new value. +#define BW_FTM_MODE_FTMEN(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FTMEN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_MODE, field INIT[1] (RW) + * + * When a 1 is written to INIT bit the channels output is initialized according + * to the state of their corresponding bit in the OUTINIT register. Writing a 0 + * to INIT bit has no effect. The INIT bit is always read as 0. + */ +//@{ +#define BP_FTM_MODE_INIT (1U) //!< Bit position for FTM_MODE_INIT. +#define BM_FTM_MODE_INIT (0x00000002U) //!< Bit mask for FTM_MODE_INIT. +#define BS_FTM_MODE_INIT (1U) //!< Bit field size in bits for FTM_MODE_INIT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_MODE_INIT field. +#define BR_FTM_MODE_INIT(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_INIT)) +#endif + +//! @brief Format value for bitfield FTM_MODE_INIT. +#define BF_FTM_MODE_INIT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_MODE_INIT), uint32_t) & BM_FTM_MODE_INIT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the INIT field to a new value. +#define BW_FTM_MODE_INIT(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_INIT) = (v)) +#endif +//@} + +/*! + * @name Register FTM_MODE, field WPDIS[2] (RW) + * + * When write protection is enabled (WPDIS = 0), write protected bits cannot be + * written. When write protection is disabled (WPDIS = 1), write protected bits + * can be written. The WPDIS bit is the negation of the WPEN bit. WPDIS is cleared + * when 1 is written to WPEN. WPDIS is set when WPEN bit is read as a 1 and then + * 1 is written to WPDIS. Writing 0 to WPDIS has no effect. + * + * Values: + * - 0 - Write protection is enabled. + * - 1 - Write protection is disabled. + */ +//@{ +#define BP_FTM_MODE_WPDIS (2U) //!< Bit position for FTM_MODE_WPDIS. +#define BM_FTM_MODE_WPDIS (0x00000004U) //!< Bit mask for FTM_MODE_WPDIS. +#define BS_FTM_MODE_WPDIS (1U) //!< Bit field size in bits for FTM_MODE_WPDIS. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_MODE_WPDIS field. +#define BR_FTM_MODE_WPDIS(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_WPDIS)) +#endif + +//! @brief Format value for bitfield FTM_MODE_WPDIS. +#define BF_FTM_MODE_WPDIS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_MODE_WPDIS), uint32_t) & BM_FTM_MODE_WPDIS) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WPDIS field to a new value. +#define BW_FTM_MODE_WPDIS(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_WPDIS) = (v)) +#endif +//@} + +/*! + * @name Register FTM_MODE, field PWMSYNC[3] (RW) + * + * Selects which triggers can be used by MOD, CnV, OUTMASK, and FTM counter + * synchronization. See PWM synchronization. The PWMSYNC bit configures the + * synchronization when SYNCMODE is 0. + * + * Values: + * - 0 - No restrictions. Software and hardware triggers can be used by MOD, + * CnV, OUTMASK, and FTM counter synchronization. + * - 1 - Software trigger can only be used by MOD and CnV synchronization, and + * hardware triggers can only be used by OUTMASK and FTM counter + * synchronization. + */ +//@{ +#define BP_FTM_MODE_PWMSYNC (3U) //!< Bit position for FTM_MODE_PWMSYNC. +#define BM_FTM_MODE_PWMSYNC (0x00000008U) //!< Bit mask for FTM_MODE_PWMSYNC. +#define BS_FTM_MODE_PWMSYNC (1U) //!< Bit field size in bits for FTM_MODE_PWMSYNC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_MODE_PWMSYNC field. +#define BR_FTM_MODE_PWMSYNC(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_PWMSYNC)) +#endif + +//! @brief Format value for bitfield FTM_MODE_PWMSYNC. +#define BF_FTM_MODE_PWMSYNC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_MODE_PWMSYNC), uint32_t) & BM_FTM_MODE_PWMSYNC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PWMSYNC field to a new value. +#define BW_FTM_MODE_PWMSYNC(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_PWMSYNC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_MODE, field CAPTEST[4] (RW) + * + * Enables the capture test mode. This field is write protected. It can be + * written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Capture test mode is disabled. + * - 1 - Capture test mode is enabled. + */ +//@{ +#define BP_FTM_MODE_CAPTEST (4U) //!< Bit position for FTM_MODE_CAPTEST. +#define BM_FTM_MODE_CAPTEST (0x00000010U) //!< Bit mask for FTM_MODE_CAPTEST. +#define BS_FTM_MODE_CAPTEST (1U) //!< Bit field size in bits for FTM_MODE_CAPTEST. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_MODE_CAPTEST field. +#define BR_FTM_MODE_CAPTEST(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_CAPTEST)) +#endif + +//! @brief Format value for bitfield FTM_MODE_CAPTEST. +#define BF_FTM_MODE_CAPTEST(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_MODE_CAPTEST), uint32_t) & BM_FTM_MODE_CAPTEST) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CAPTEST field to a new value. +#define BW_FTM_MODE_CAPTEST(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_CAPTEST) = (v)) +#endif +//@} + +/*! + * @name Register FTM_MODE, field FAULTM[6:5] (RW) + * + * Defines the FTM fault control mode. This field is write protected. It can be + * written only when MODE[WPDIS] = 1. + * + * Values: + * - 00 - Fault control is disabled for all channels. + * - 01 - Fault control is enabled for even channels only (channels 0, 2, 4, and + * 6), and the selected mode is the manual fault clearing. + * - 10 - Fault control is enabled for all channels, and the selected mode is + * the manual fault clearing. + * - 11 - Fault control is enabled for all channels, and the selected mode is + * the automatic fault clearing. + */ +//@{ +#define BP_FTM_MODE_FAULTM (5U) //!< Bit position for FTM_MODE_FAULTM. +#define BM_FTM_MODE_FAULTM (0x00000060U) //!< Bit mask for FTM_MODE_FAULTM. +#define BS_FTM_MODE_FAULTM (2U) //!< Bit field size in bits for FTM_MODE_FAULTM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_MODE_FAULTM field. +#define BR_FTM_MODE_FAULTM(x) (HW_FTM_MODE(x).B.FAULTM) +#endif + +//! @brief Format value for bitfield FTM_MODE_FAULTM. +#define BF_FTM_MODE_FAULTM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_MODE_FAULTM), uint32_t) & BM_FTM_MODE_FAULTM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULTM field to a new value. +#define BW_FTM_MODE_FAULTM(x, v) (HW_FTM_MODE_WR(x, (HW_FTM_MODE_RD(x) & ~BM_FTM_MODE_FAULTM) | BF_FTM_MODE_FAULTM(v))) +#endif +//@} + +/*! + * @name Register FTM_MODE, field FAULTIE[7] (RW) + * + * Enables the generation of an interrupt when a fault is detected by FTM and + * the FTM fault control is enabled. + * + * Values: + * - 0 - Fault control interrupt is disabled. + * - 1 - Fault control interrupt is enabled. + */ +//@{ +#define BP_FTM_MODE_FAULTIE (7U) //!< Bit position for FTM_MODE_FAULTIE. +#define BM_FTM_MODE_FAULTIE (0x00000080U) //!< Bit mask for FTM_MODE_FAULTIE. +#define BS_FTM_MODE_FAULTIE (1U) //!< Bit field size in bits for FTM_MODE_FAULTIE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_MODE_FAULTIE field. +#define BR_FTM_MODE_FAULTIE(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FAULTIE)) +#endif + +//! @brief Format value for bitfield FTM_MODE_FAULTIE. +#define BF_FTM_MODE_FAULTIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_MODE_FAULTIE), uint32_t) & BM_FTM_MODE_FAULTIE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULTIE field to a new value. +#define BW_FTM_MODE_FAULTIE(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FAULTIE) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_SYNC - Synchronization +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_SYNC - Synchronization (RW) + * + * Reset value: 0x00000000U + * + * This register configures the PWM synchronization. A synchronization event can + * perform the synchronized update of MOD, CV, and OUTMASK registers with the + * value of their write buffer and the FTM counter initialization. The software + * trigger, SWSYNC bit, and hardware triggers TRIG0, TRIG1, and TRIG2 bits have a + * potential conflict if used together when SYNCMODE = 0. Use only hardware or + * software triggers but not both at the same time, otherwise unpredictable behavior + * is likely to happen. The selection of the loading point, CNTMAX and CNTMIN + * bits, is intended to provide the update of MOD, CNTIN, and CnV registers across + * all enabled channels simultaneously. The use of the loading point selection + * together with SYNCMODE = 0 and hardware trigger selection, TRIG0, TRIG1, or TRIG2 + * bits, is likely to result in unpredictable behavior. The synchronization + * event selection also depends on the PWMSYNC (MODE register) and SYNCMODE (SYNCONF + * register) bits. See PWM synchronization. + */ +typedef union _hw_ftm_sync +{ + uint32_t U; + struct _hw_ftm_sync_bitfields + { + uint32_t CNTMIN : 1; //!< [0] Minimum Loading Point Enable + uint32_t CNTMAX : 1; //!< [1] Maximum Loading Point Enable + uint32_t REINIT : 1; //!< [2] FTM Counter Reinitialization By + //! Synchronization (FTM counter synchronization) + uint32_t SYNCHOM : 1; //!< [3] Output Mask Synchronization + uint32_t TRIG0 : 1; //!< [4] PWM Synchronization Hardware Trigger 0 + uint32_t TRIG1 : 1; //!< [5] PWM Synchronization Hardware Trigger 1 + uint32_t TRIG2 : 1; //!< [6] PWM Synchronization Hardware Trigger 2 + uint32_t SWSYNC : 1; //!< [7] PWM Synchronization Software Trigger + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_sync_t; +#endif + +/*! + * @name Constants and macros for entire FTM_SYNC register + */ +//@{ +#define HW_FTM_SYNC_ADDR(x) (REGS_FTM_BASE(x) + 0x58U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_SYNC(x) (*(__IO hw_ftm_sync_t *) HW_FTM_SYNC_ADDR(x)) +#define HW_FTM_SYNC_RD(x) (HW_FTM_SYNC(x).U) +#define HW_FTM_SYNC_WR(x, v) (HW_FTM_SYNC(x).U = (v)) +#define HW_FTM_SYNC_SET(x, v) (HW_FTM_SYNC_WR(x, HW_FTM_SYNC_RD(x) | (v))) +#define HW_FTM_SYNC_CLR(x, v) (HW_FTM_SYNC_WR(x, HW_FTM_SYNC_RD(x) & ~(v))) +#define HW_FTM_SYNC_TOG(x, v) (HW_FTM_SYNC_WR(x, HW_FTM_SYNC_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_SYNC bitfields + */ + +/*! + * @name Register FTM_SYNC, field CNTMIN[0] (RW) + * + * Selects the minimum loading point to PWM synchronization. See Boundary cycle + * and loading points. If CNTMIN is one, the selected loading point is when the + * FTM counter reaches its minimum value (CNTIN register). + * + * Values: + * - 0 - The minimum loading point is disabled. + * - 1 - The minimum loading point is enabled. + */ +//@{ +#define BP_FTM_SYNC_CNTMIN (0U) //!< Bit position for FTM_SYNC_CNTMIN. +#define BM_FTM_SYNC_CNTMIN (0x00000001U) //!< Bit mask for FTM_SYNC_CNTMIN. +#define BS_FTM_SYNC_CNTMIN (1U) //!< Bit field size in bits for FTM_SYNC_CNTMIN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNC_CNTMIN field. +#define BR_FTM_SYNC_CNTMIN(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMIN)) +#endif + +//! @brief Format value for bitfield FTM_SYNC_CNTMIN. +#define BF_FTM_SYNC_CNTMIN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNC_CNTMIN), uint32_t) & BM_FTM_SYNC_CNTMIN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CNTMIN field to a new value. +#define BW_FTM_SYNC_CNTMIN(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMIN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNC, field CNTMAX[1] (RW) + * + * Selects the maximum loading point to PWM synchronization. See Boundary cycle + * and loading points. If CNTMAX is 1, the selected loading point is when the FTM + * counter reaches its maximum value (MOD register). + * + * Values: + * - 0 - The maximum loading point is disabled. + * - 1 - The maximum loading point is enabled. + */ +//@{ +#define BP_FTM_SYNC_CNTMAX (1U) //!< Bit position for FTM_SYNC_CNTMAX. +#define BM_FTM_SYNC_CNTMAX (0x00000002U) //!< Bit mask for FTM_SYNC_CNTMAX. +#define BS_FTM_SYNC_CNTMAX (1U) //!< Bit field size in bits for FTM_SYNC_CNTMAX. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNC_CNTMAX field. +#define BR_FTM_SYNC_CNTMAX(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMAX)) +#endif + +//! @brief Format value for bitfield FTM_SYNC_CNTMAX. +#define BF_FTM_SYNC_CNTMAX(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNC_CNTMAX), uint32_t) & BM_FTM_SYNC_CNTMAX) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CNTMAX field to a new value. +#define BW_FTM_SYNC_CNTMAX(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMAX) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNC, field REINIT[2] (RW) + * + * Determines if the FTM counter is reinitialized when the selected trigger for + * the synchronization is detected. The REINIT bit configures the synchronization + * when SYNCMODE is zero. + * + * Values: + * - 0 - FTM counter continues to count normally. + * - 1 - FTM counter is updated with its initial value when the selected trigger + * is detected. + */ +//@{ +#define BP_FTM_SYNC_REINIT (2U) //!< Bit position for FTM_SYNC_REINIT. +#define BM_FTM_SYNC_REINIT (0x00000004U) //!< Bit mask for FTM_SYNC_REINIT. +#define BS_FTM_SYNC_REINIT (1U) //!< Bit field size in bits for FTM_SYNC_REINIT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNC_REINIT field. +#define BR_FTM_SYNC_REINIT(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_REINIT)) +#endif + +//! @brief Format value for bitfield FTM_SYNC_REINIT. +#define BF_FTM_SYNC_REINIT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNC_REINIT), uint32_t) & BM_FTM_SYNC_REINIT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the REINIT field to a new value. +#define BW_FTM_SYNC_REINIT(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_REINIT) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNC, field SYNCHOM[3] (RW) + * + * Selects when the OUTMASK register is updated with the value of its buffer. + * + * Values: + * - 0 - OUTMASK register is updated with the value of its buffer in all rising + * edges of the system clock. + * - 1 - OUTMASK register is updated with the value of its buffer only by the + * PWM synchronization. + */ +//@{ +#define BP_FTM_SYNC_SYNCHOM (3U) //!< Bit position for FTM_SYNC_SYNCHOM. +#define BM_FTM_SYNC_SYNCHOM (0x00000008U) //!< Bit mask for FTM_SYNC_SYNCHOM. +#define BS_FTM_SYNC_SYNCHOM (1U) //!< Bit field size in bits for FTM_SYNC_SYNCHOM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNC_SYNCHOM field. +#define BR_FTM_SYNC_SYNCHOM(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SYNCHOM)) +#endif + +//! @brief Format value for bitfield FTM_SYNC_SYNCHOM. +#define BF_FTM_SYNC_SYNCHOM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNC_SYNCHOM), uint32_t) & BM_FTM_SYNC_SYNCHOM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SYNCHOM field to a new value. +#define BW_FTM_SYNC_SYNCHOM(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SYNCHOM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNC, field TRIG0[4] (RW) + * + * Enables hardware trigger 0 to the PWM synchronization. Hardware trigger 0 + * occurs when a rising edge is detected at the trigger 0 input signal. + * + * Values: + * - 0 - Trigger is disabled. + * - 1 - Trigger is enabled. + */ +//@{ +#define BP_FTM_SYNC_TRIG0 (4U) //!< Bit position for FTM_SYNC_TRIG0. +#define BM_FTM_SYNC_TRIG0 (0x00000010U) //!< Bit mask for FTM_SYNC_TRIG0. +#define BS_FTM_SYNC_TRIG0 (1U) //!< Bit field size in bits for FTM_SYNC_TRIG0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNC_TRIG0 field. +#define BR_FTM_SYNC_TRIG0(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG0)) +#endif + +//! @brief Format value for bitfield FTM_SYNC_TRIG0. +#define BF_FTM_SYNC_TRIG0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNC_TRIG0), uint32_t) & BM_FTM_SYNC_TRIG0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TRIG0 field to a new value. +#define BW_FTM_SYNC_TRIG0(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG0) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNC, field TRIG1[5] (RW) + * + * Enables hardware trigger 1 to the PWM synchronization. Hardware trigger 1 + * happens when a rising edge is detected at the trigger 1 input signal. + * + * Values: + * - 0 - Trigger is disabled. + * - 1 - Trigger is enabled. + */ +//@{ +#define BP_FTM_SYNC_TRIG1 (5U) //!< Bit position for FTM_SYNC_TRIG1. +#define BM_FTM_SYNC_TRIG1 (0x00000020U) //!< Bit mask for FTM_SYNC_TRIG1. +#define BS_FTM_SYNC_TRIG1 (1U) //!< Bit field size in bits for FTM_SYNC_TRIG1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNC_TRIG1 field. +#define BR_FTM_SYNC_TRIG1(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG1)) +#endif + +//! @brief Format value for bitfield FTM_SYNC_TRIG1. +#define BF_FTM_SYNC_TRIG1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNC_TRIG1), uint32_t) & BM_FTM_SYNC_TRIG1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TRIG1 field to a new value. +#define BW_FTM_SYNC_TRIG1(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG1) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNC, field TRIG2[6] (RW) + * + * Enables hardware trigger 2 to the PWM synchronization. Hardware trigger 2 + * happens when a rising edge is detected at the trigger 2 input signal. + * + * Values: + * - 0 - Trigger is disabled. + * - 1 - Trigger is enabled. + */ +//@{ +#define BP_FTM_SYNC_TRIG2 (6U) //!< Bit position for FTM_SYNC_TRIG2. +#define BM_FTM_SYNC_TRIG2 (0x00000040U) //!< Bit mask for FTM_SYNC_TRIG2. +#define BS_FTM_SYNC_TRIG2 (1U) //!< Bit field size in bits for FTM_SYNC_TRIG2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNC_TRIG2 field. +#define BR_FTM_SYNC_TRIG2(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG2)) +#endif + +//! @brief Format value for bitfield FTM_SYNC_TRIG2. +#define BF_FTM_SYNC_TRIG2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNC_TRIG2), uint32_t) & BM_FTM_SYNC_TRIG2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TRIG2 field to a new value. +#define BW_FTM_SYNC_TRIG2(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG2) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNC, field SWSYNC[7] (RW) + * + * Selects the software trigger as the PWM synchronization trigger. The software + * trigger happens when a 1 is written to SWSYNC bit. + * + * Values: + * - 0 - Software trigger is not selected. + * - 1 - Software trigger is selected. + */ +//@{ +#define BP_FTM_SYNC_SWSYNC (7U) //!< Bit position for FTM_SYNC_SWSYNC. +#define BM_FTM_SYNC_SWSYNC (0x00000080U) //!< Bit mask for FTM_SYNC_SWSYNC. +#define BS_FTM_SYNC_SWSYNC (1U) //!< Bit field size in bits for FTM_SYNC_SWSYNC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNC_SWSYNC field. +#define BR_FTM_SYNC_SWSYNC(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SWSYNC)) +#endif + +//! @brief Format value for bitfield FTM_SYNC_SWSYNC. +#define BF_FTM_SYNC_SWSYNC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNC_SWSYNC), uint32_t) & BM_FTM_SYNC_SWSYNC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SWSYNC field to a new value. +#define BW_FTM_SYNC_SWSYNC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SWSYNC) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_OUTINIT - Initial State For Channels Output +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_OUTINIT - Initial State For Channels Output (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_ftm_outinit +{ + uint32_t U; + struct _hw_ftm_outinit_bitfields + { + uint32_t CH0OI : 1; //!< [0] Channel 0 Output Initialization Value + uint32_t CH1OI : 1; //!< [1] Channel 1 Output Initialization Value + uint32_t CH2OI : 1; //!< [2] Channel 2 Output Initialization Value + uint32_t CH3OI : 1; //!< [3] Channel 3 Output Initialization Value + uint32_t CH4OI : 1; //!< [4] Channel 4 Output Initialization Value + uint32_t CH5OI : 1; //!< [5] Channel 5 Output Initialization Value + uint32_t CH6OI : 1; //!< [6] Channel 6 Output Initialization Value + uint32_t CH7OI : 1; //!< [7] Channel 7 Output Initialization Value + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_outinit_t; +#endif + +/*! + * @name Constants and macros for entire FTM_OUTINIT register + */ +//@{ +#define HW_FTM_OUTINIT_ADDR(x) (REGS_FTM_BASE(x) + 0x5CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_OUTINIT(x) (*(__IO hw_ftm_outinit_t *) HW_FTM_OUTINIT_ADDR(x)) +#define HW_FTM_OUTINIT_RD(x) (HW_FTM_OUTINIT(x).U) +#define HW_FTM_OUTINIT_WR(x, v) (HW_FTM_OUTINIT(x).U = (v)) +#define HW_FTM_OUTINIT_SET(x, v) (HW_FTM_OUTINIT_WR(x, HW_FTM_OUTINIT_RD(x) | (v))) +#define HW_FTM_OUTINIT_CLR(x, v) (HW_FTM_OUTINIT_WR(x, HW_FTM_OUTINIT_RD(x) & ~(v))) +#define HW_FTM_OUTINIT_TOG(x, v) (HW_FTM_OUTINIT_WR(x, HW_FTM_OUTINIT_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_OUTINIT bitfields + */ + +/*! + * @name Register FTM_OUTINIT, field CH0OI[0] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +//@{ +#define BP_FTM_OUTINIT_CH0OI (0U) //!< Bit position for FTM_OUTINIT_CH0OI. +#define BM_FTM_OUTINIT_CH0OI (0x00000001U) //!< Bit mask for FTM_OUTINIT_CH0OI. +#define BS_FTM_OUTINIT_CH0OI (1U) //!< Bit field size in bits for FTM_OUTINIT_CH0OI. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTINIT_CH0OI field. +#define BR_FTM_OUTINIT_CH0OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH0OI)) +#endif + +//! @brief Format value for bitfield FTM_OUTINIT_CH0OI. +#define BF_FTM_OUTINIT_CH0OI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTINIT_CH0OI), uint32_t) & BM_FTM_OUTINIT_CH0OI) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH0OI field to a new value. +#define BW_FTM_OUTINIT_CH0OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH0OI) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTINIT, field CH1OI[1] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +//@{ +#define BP_FTM_OUTINIT_CH1OI (1U) //!< Bit position for FTM_OUTINIT_CH1OI. +#define BM_FTM_OUTINIT_CH1OI (0x00000002U) //!< Bit mask for FTM_OUTINIT_CH1OI. +#define BS_FTM_OUTINIT_CH1OI (1U) //!< Bit field size in bits for FTM_OUTINIT_CH1OI. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTINIT_CH1OI field. +#define BR_FTM_OUTINIT_CH1OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH1OI)) +#endif + +//! @brief Format value for bitfield FTM_OUTINIT_CH1OI. +#define BF_FTM_OUTINIT_CH1OI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTINIT_CH1OI), uint32_t) & BM_FTM_OUTINIT_CH1OI) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH1OI field to a new value. +#define BW_FTM_OUTINIT_CH1OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH1OI) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTINIT, field CH2OI[2] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +//@{ +#define BP_FTM_OUTINIT_CH2OI (2U) //!< Bit position for FTM_OUTINIT_CH2OI. +#define BM_FTM_OUTINIT_CH2OI (0x00000004U) //!< Bit mask for FTM_OUTINIT_CH2OI. +#define BS_FTM_OUTINIT_CH2OI (1U) //!< Bit field size in bits for FTM_OUTINIT_CH2OI. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTINIT_CH2OI field. +#define BR_FTM_OUTINIT_CH2OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH2OI)) +#endif + +//! @brief Format value for bitfield FTM_OUTINIT_CH2OI. +#define BF_FTM_OUTINIT_CH2OI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTINIT_CH2OI), uint32_t) & BM_FTM_OUTINIT_CH2OI) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH2OI field to a new value. +#define BW_FTM_OUTINIT_CH2OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH2OI) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTINIT, field CH3OI[3] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +//@{ +#define BP_FTM_OUTINIT_CH3OI (3U) //!< Bit position for FTM_OUTINIT_CH3OI. +#define BM_FTM_OUTINIT_CH3OI (0x00000008U) //!< Bit mask for FTM_OUTINIT_CH3OI. +#define BS_FTM_OUTINIT_CH3OI (1U) //!< Bit field size in bits for FTM_OUTINIT_CH3OI. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTINIT_CH3OI field. +#define BR_FTM_OUTINIT_CH3OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH3OI)) +#endif + +//! @brief Format value for bitfield FTM_OUTINIT_CH3OI. +#define BF_FTM_OUTINIT_CH3OI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTINIT_CH3OI), uint32_t) & BM_FTM_OUTINIT_CH3OI) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH3OI field to a new value. +#define BW_FTM_OUTINIT_CH3OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH3OI) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTINIT, field CH4OI[4] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +//@{ +#define BP_FTM_OUTINIT_CH4OI (4U) //!< Bit position for FTM_OUTINIT_CH4OI. +#define BM_FTM_OUTINIT_CH4OI (0x00000010U) //!< Bit mask for FTM_OUTINIT_CH4OI. +#define BS_FTM_OUTINIT_CH4OI (1U) //!< Bit field size in bits for FTM_OUTINIT_CH4OI. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTINIT_CH4OI field. +#define BR_FTM_OUTINIT_CH4OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH4OI)) +#endif + +//! @brief Format value for bitfield FTM_OUTINIT_CH4OI. +#define BF_FTM_OUTINIT_CH4OI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTINIT_CH4OI), uint32_t) & BM_FTM_OUTINIT_CH4OI) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH4OI field to a new value. +#define BW_FTM_OUTINIT_CH4OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH4OI) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTINIT, field CH5OI[5] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +//@{ +#define BP_FTM_OUTINIT_CH5OI (5U) //!< Bit position for FTM_OUTINIT_CH5OI. +#define BM_FTM_OUTINIT_CH5OI (0x00000020U) //!< Bit mask for FTM_OUTINIT_CH5OI. +#define BS_FTM_OUTINIT_CH5OI (1U) //!< Bit field size in bits for FTM_OUTINIT_CH5OI. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTINIT_CH5OI field. +#define BR_FTM_OUTINIT_CH5OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH5OI)) +#endif + +//! @brief Format value for bitfield FTM_OUTINIT_CH5OI. +#define BF_FTM_OUTINIT_CH5OI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTINIT_CH5OI), uint32_t) & BM_FTM_OUTINIT_CH5OI) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH5OI field to a new value. +#define BW_FTM_OUTINIT_CH5OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH5OI) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTINIT, field CH6OI[6] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +//@{ +#define BP_FTM_OUTINIT_CH6OI (6U) //!< Bit position for FTM_OUTINIT_CH6OI. +#define BM_FTM_OUTINIT_CH6OI (0x00000040U) //!< Bit mask for FTM_OUTINIT_CH6OI. +#define BS_FTM_OUTINIT_CH6OI (1U) //!< Bit field size in bits for FTM_OUTINIT_CH6OI. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTINIT_CH6OI field. +#define BR_FTM_OUTINIT_CH6OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH6OI)) +#endif + +//! @brief Format value for bitfield FTM_OUTINIT_CH6OI. +#define BF_FTM_OUTINIT_CH6OI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTINIT_CH6OI), uint32_t) & BM_FTM_OUTINIT_CH6OI) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH6OI field to a new value. +#define BW_FTM_OUTINIT_CH6OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH6OI) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTINIT, field CH7OI[7] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +//@{ +#define BP_FTM_OUTINIT_CH7OI (7U) //!< Bit position for FTM_OUTINIT_CH7OI. +#define BM_FTM_OUTINIT_CH7OI (0x00000080U) //!< Bit mask for FTM_OUTINIT_CH7OI. +#define BS_FTM_OUTINIT_CH7OI (1U) //!< Bit field size in bits for FTM_OUTINIT_CH7OI. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTINIT_CH7OI field. +#define BR_FTM_OUTINIT_CH7OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH7OI)) +#endif + +//! @brief Format value for bitfield FTM_OUTINIT_CH7OI. +#define BF_FTM_OUTINIT_CH7OI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTINIT_CH7OI), uint32_t) & BM_FTM_OUTINIT_CH7OI) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH7OI field to a new value. +#define BW_FTM_OUTINIT_CH7OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH7OI) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_OUTMASK - Output Mask +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_OUTMASK - Output Mask (RW) + * + * Reset value: 0x00000000U + * + * This register provides a mask for each FTM channel. The mask of a channel + * determines if its output responds, that is, it is masked or not, when a match + * occurs. This feature is used for BLDC control where the PWM signal is presented + * to an electric motor at specific times to provide electronic commutation. Any + * write to the OUTMASK register, stores the value in its write buffer. The + * register is updated with the value of its write buffer according to PWM + * synchronization. + */ +typedef union _hw_ftm_outmask +{ + uint32_t U; + struct _hw_ftm_outmask_bitfields + { + uint32_t CH0OM : 1; //!< [0] Channel 0 Output Mask + uint32_t CH1OM : 1; //!< [1] Channel 1 Output Mask + uint32_t CH2OM : 1; //!< [2] Channel 2 Output Mask + uint32_t CH3OM : 1; //!< [3] Channel 3 Output Mask + uint32_t CH4OM : 1; //!< [4] Channel 4 Output Mask + uint32_t CH5OM : 1; //!< [5] Channel 5 Output Mask + uint32_t CH6OM : 1; //!< [6] Channel 6 Output Mask + uint32_t CH7OM : 1; //!< [7] Channel 7 Output Mask + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_outmask_t; +#endif + +/*! + * @name Constants and macros for entire FTM_OUTMASK register + */ +//@{ +#define HW_FTM_OUTMASK_ADDR(x) (REGS_FTM_BASE(x) + 0x60U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_OUTMASK(x) (*(__IO hw_ftm_outmask_t *) HW_FTM_OUTMASK_ADDR(x)) +#define HW_FTM_OUTMASK_RD(x) (HW_FTM_OUTMASK(x).U) +#define HW_FTM_OUTMASK_WR(x, v) (HW_FTM_OUTMASK(x).U = (v)) +#define HW_FTM_OUTMASK_SET(x, v) (HW_FTM_OUTMASK_WR(x, HW_FTM_OUTMASK_RD(x) | (v))) +#define HW_FTM_OUTMASK_CLR(x, v) (HW_FTM_OUTMASK_WR(x, HW_FTM_OUTMASK_RD(x) & ~(v))) +#define HW_FTM_OUTMASK_TOG(x, v) (HW_FTM_OUTMASK_WR(x, HW_FTM_OUTMASK_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_OUTMASK bitfields + */ + +/*! + * @name Register FTM_OUTMASK, field CH0OM[0] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +//@{ +#define BP_FTM_OUTMASK_CH0OM (0U) //!< Bit position for FTM_OUTMASK_CH0OM. +#define BM_FTM_OUTMASK_CH0OM (0x00000001U) //!< Bit mask for FTM_OUTMASK_CH0OM. +#define BS_FTM_OUTMASK_CH0OM (1U) //!< Bit field size in bits for FTM_OUTMASK_CH0OM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTMASK_CH0OM field. +#define BR_FTM_OUTMASK_CH0OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH0OM)) +#endif + +//! @brief Format value for bitfield FTM_OUTMASK_CH0OM. +#define BF_FTM_OUTMASK_CH0OM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTMASK_CH0OM), uint32_t) & BM_FTM_OUTMASK_CH0OM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH0OM field to a new value. +#define BW_FTM_OUTMASK_CH0OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH0OM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTMASK, field CH1OM[1] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +//@{ +#define BP_FTM_OUTMASK_CH1OM (1U) //!< Bit position for FTM_OUTMASK_CH1OM. +#define BM_FTM_OUTMASK_CH1OM (0x00000002U) //!< Bit mask for FTM_OUTMASK_CH1OM. +#define BS_FTM_OUTMASK_CH1OM (1U) //!< Bit field size in bits for FTM_OUTMASK_CH1OM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTMASK_CH1OM field. +#define BR_FTM_OUTMASK_CH1OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH1OM)) +#endif + +//! @brief Format value for bitfield FTM_OUTMASK_CH1OM. +#define BF_FTM_OUTMASK_CH1OM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTMASK_CH1OM), uint32_t) & BM_FTM_OUTMASK_CH1OM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH1OM field to a new value. +#define BW_FTM_OUTMASK_CH1OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH1OM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTMASK, field CH2OM[2] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +//@{ +#define BP_FTM_OUTMASK_CH2OM (2U) //!< Bit position for FTM_OUTMASK_CH2OM. +#define BM_FTM_OUTMASK_CH2OM (0x00000004U) //!< Bit mask for FTM_OUTMASK_CH2OM. +#define BS_FTM_OUTMASK_CH2OM (1U) //!< Bit field size in bits for FTM_OUTMASK_CH2OM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTMASK_CH2OM field. +#define BR_FTM_OUTMASK_CH2OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH2OM)) +#endif + +//! @brief Format value for bitfield FTM_OUTMASK_CH2OM. +#define BF_FTM_OUTMASK_CH2OM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTMASK_CH2OM), uint32_t) & BM_FTM_OUTMASK_CH2OM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH2OM field to a new value. +#define BW_FTM_OUTMASK_CH2OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH2OM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTMASK, field CH3OM[3] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +//@{ +#define BP_FTM_OUTMASK_CH3OM (3U) //!< Bit position for FTM_OUTMASK_CH3OM. +#define BM_FTM_OUTMASK_CH3OM (0x00000008U) //!< Bit mask for FTM_OUTMASK_CH3OM. +#define BS_FTM_OUTMASK_CH3OM (1U) //!< Bit field size in bits for FTM_OUTMASK_CH3OM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTMASK_CH3OM field. +#define BR_FTM_OUTMASK_CH3OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH3OM)) +#endif + +//! @brief Format value for bitfield FTM_OUTMASK_CH3OM. +#define BF_FTM_OUTMASK_CH3OM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTMASK_CH3OM), uint32_t) & BM_FTM_OUTMASK_CH3OM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH3OM field to a new value. +#define BW_FTM_OUTMASK_CH3OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH3OM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTMASK, field CH4OM[4] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +//@{ +#define BP_FTM_OUTMASK_CH4OM (4U) //!< Bit position for FTM_OUTMASK_CH4OM. +#define BM_FTM_OUTMASK_CH4OM (0x00000010U) //!< Bit mask for FTM_OUTMASK_CH4OM. +#define BS_FTM_OUTMASK_CH4OM (1U) //!< Bit field size in bits for FTM_OUTMASK_CH4OM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTMASK_CH4OM field. +#define BR_FTM_OUTMASK_CH4OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH4OM)) +#endif + +//! @brief Format value for bitfield FTM_OUTMASK_CH4OM. +#define BF_FTM_OUTMASK_CH4OM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTMASK_CH4OM), uint32_t) & BM_FTM_OUTMASK_CH4OM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH4OM field to a new value. +#define BW_FTM_OUTMASK_CH4OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH4OM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTMASK, field CH5OM[5] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +//@{ +#define BP_FTM_OUTMASK_CH5OM (5U) //!< Bit position for FTM_OUTMASK_CH5OM. +#define BM_FTM_OUTMASK_CH5OM (0x00000020U) //!< Bit mask for FTM_OUTMASK_CH5OM. +#define BS_FTM_OUTMASK_CH5OM (1U) //!< Bit field size in bits for FTM_OUTMASK_CH5OM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTMASK_CH5OM field. +#define BR_FTM_OUTMASK_CH5OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH5OM)) +#endif + +//! @brief Format value for bitfield FTM_OUTMASK_CH5OM. +#define BF_FTM_OUTMASK_CH5OM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTMASK_CH5OM), uint32_t) & BM_FTM_OUTMASK_CH5OM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH5OM field to a new value. +#define BW_FTM_OUTMASK_CH5OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH5OM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTMASK, field CH6OM[6] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +//@{ +#define BP_FTM_OUTMASK_CH6OM (6U) //!< Bit position for FTM_OUTMASK_CH6OM. +#define BM_FTM_OUTMASK_CH6OM (0x00000040U) //!< Bit mask for FTM_OUTMASK_CH6OM. +#define BS_FTM_OUTMASK_CH6OM (1U) //!< Bit field size in bits for FTM_OUTMASK_CH6OM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTMASK_CH6OM field. +#define BR_FTM_OUTMASK_CH6OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH6OM)) +#endif + +//! @brief Format value for bitfield FTM_OUTMASK_CH6OM. +#define BF_FTM_OUTMASK_CH6OM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTMASK_CH6OM), uint32_t) & BM_FTM_OUTMASK_CH6OM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH6OM field to a new value. +#define BW_FTM_OUTMASK_CH6OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH6OM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_OUTMASK, field CH7OM[7] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +//@{ +#define BP_FTM_OUTMASK_CH7OM (7U) //!< Bit position for FTM_OUTMASK_CH7OM. +#define BM_FTM_OUTMASK_CH7OM (0x00000080U) //!< Bit mask for FTM_OUTMASK_CH7OM. +#define BS_FTM_OUTMASK_CH7OM (1U) //!< Bit field size in bits for FTM_OUTMASK_CH7OM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_OUTMASK_CH7OM field. +#define BR_FTM_OUTMASK_CH7OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH7OM)) +#endif + +//! @brief Format value for bitfield FTM_OUTMASK_CH7OM. +#define BF_FTM_OUTMASK_CH7OM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_OUTMASK_CH7OM), uint32_t) & BM_FTM_OUTMASK_CH7OM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH7OM field to a new value. +#define BW_FTM_OUTMASK_CH7OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH7OM) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_COMBINE - Function For Linked Channels +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_COMBINE - Function For Linked Channels (RW) + * + * Reset value: 0x00000000U + * + * This register contains the control bits used to configure the fault control, + * synchronization, deadtime insertion, Dual Edge Capture mode, Complementary, + * and Combine mode for each pair of channels (n) and (n+1), where n equals 0, 2, + * 4, and 6. + */ +typedef union _hw_ftm_combine +{ + uint32_t U; + struct _hw_ftm_combine_bitfields + { + uint32_t COMBINE0 : 1; //!< [0] Combine Channels For n = 0 + uint32_t COMP0 : 1; //!< [1] Complement Of Channel (n) For n = 0 + uint32_t DECAPEN0 : 1; //!< [2] Dual Edge Capture Mode Enable For n = + //! 0 + uint32_t DECAP0 : 1; //!< [3] Dual Edge Capture Mode Captures For n = + //! 0 + uint32_t DTEN0 : 1; //!< [4] Deadtime Enable For n = 0 + uint32_t SYNCEN0 : 1; //!< [5] Synchronization Enable For n = 0 + uint32_t FAULTEN0 : 1; //!< [6] Fault Control Enable For n = 0 + uint32_t RESERVED0 : 1; //!< [7] + uint32_t COMBINE1 : 1; //!< [8] Combine Channels For n = 2 + uint32_t COMP1 : 1; //!< [9] Complement Of Channel (n) For n = 2 + uint32_t DECAPEN1 : 1; //!< [10] Dual Edge Capture Mode Enable For n + //! = 2 + uint32_t DECAP1 : 1; //!< [11] Dual Edge Capture Mode Captures For n + //! = 2 + uint32_t DTEN1 : 1; //!< [12] Deadtime Enable For n = 2 + uint32_t SYNCEN1 : 1; //!< [13] Synchronization Enable For n = 2 + uint32_t FAULTEN1 : 1; //!< [14] Fault Control Enable For n = 2 + uint32_t RESERVED1 : 1; //!< [15] + uint32_t COMBINE2 : 1; //!< [16] Combine Channels For n = 4 + uint32_t COMP2 : 1; //!< [17] Complement Of Channel (n) For n = 4 + uint32_t DECAPEN2 : 1; //!< [18] Dual Edge Capture Mode Enable For n + //! = 4 + uint32_t DECAP2 : 1; //!< [19] Dual Edge Capture Mode Captures For n + //! = 4 + uint32_t DTEN2 : 1; //!< [20] Deadtime Enable For n = 4 + uint32_t SYNCEN2 : 1; //!< [21] Synchronization Enable For n = 4 + uint32_t FAULTEN2 : 1; //!< [22] Fault Control Enable For n = 4 + uint32_t RESERVED2 : 1; //!< [23] + uint32_t COMBINE3 : 1; //!< [24] Combine Channels For n = 6 + uint32_t COMP3 : 1; //!< [25] Complement Of Channel (n) for n = 6 + uint32_t DECAPEN3 : 1; //!< [26] Dual Edge Capture Mode Enable For n + //! = 6 + uint32_t DECAP3 : 1; //!< [27] Dual Edge Capture Mode Captures For n + //! = 6 + uint32_t DTEN3 : 1; //!< [28] Deadtime Enable For n = 6 + uint32_t SYNCEN3 : 1; //!< [29] Synchronization Enable For n = 6 + uint32_t FAULTEN3 : 1; //!< [30] Fault Control Enable For n = 6 + uint32_t RESERVED3 : 1; //!< [31] + } B; +} hw_ftm_combine_t; +#endif + +/*! + * @name Constants and macros for entire FTM_COMBINE register + */ +//@{ +#define HW_FTM_COMBINE_ADDR(x) (REGS_FTM_BASE(x) + 0x64U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_COMBINE(x) (*(__IO hw_ftm_combine_t *) HW_FTM_COMBINE_ADDR(x)) +#define HW_FTM_COMBINE_RD(x) (HW_FTM_COMBINE(x).U) +#define HW_FTM_COMBINE_WR(x, v) (HW_FTM_COMBINE(x).U = (v)) +#define HW_FTM_COMBINE_SET(x, v) (HW_FTM_COMBINE_WR(x, HW_FTM_COMBINE_RD(x) | (v))) +#define HW_FTM_COMBINE_CLR(x, v) (HW_FTM_COMBINE_WR(x, HW_FTM_COMBINE_RD(x) & ~(v))) +#define HW_FTM_COMBINE_TOG(x, v) (HW_FTM_COMBINE_WR(x, HW_FTM_COMBINE_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_COMBINE bitfields + */ + +/*! + * @name Register FTM_COMBINE, field COMBINE0[0] (RW) + * + * Enables the combine feature for channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Channels (n) and (n+1) are independent. + * - 1 - Channels (n) and (n+1) are combined. + */ +//@{ +#define BP_FTM_COMBINE_COMBINE0 (0U) //!< Bit position for FTM_COMBINE_COMBINE0. +#define BM_FTM_COMBINE_COMBINE0 (0x00000001U) //!< Bit mask for FTM_COMBINE_COMBINE0. +#define BS_FTM_COMBINE_COMBINE0 (1U) //!< Bit field size in bits for FTM_COMBINE_COMBINE0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_COMBINE0 field. +#define BR_FTM_COMBINE_COMBINE0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE0)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_COMBINE0. +#define BF_FTM_COMBINE_COMBINE0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_COMBINE0), uint32_t) & BM_FTM_COMBINE_COMBINE0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COMBINE0 field to a new value. +#define BW_FTM_COMBINE_COMBINE0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE0) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field COMP0[1] (RW) + * + * Enables Complementary mode for the combined channels. In Complementary mode + * the channel (n+1) output is the inverse of the channel (n) output. This field + * is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel (n+1) output is the same as the channel (n) output. + * - 1 - The channel (n+1) output is the complement of the channel (n) output. + */ +//@{ +#define BP_FTM_COMBINE_COMP0 (1U) //!< Bit position for FTM_COMBINE_COMP0. +#define BM_FTM_COMBINE_COMP0 (0x00000002U) //!< Bit mask for FTM_COMBINE_COMP0. +#define BS_FTM_COMBINE_COMP0 (1U) //!< Bit field size in bits for FTM_COMBINE_COMP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_COMP0 field. +#define BR_FTM_COMBINE_COMP0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP0)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_COMP0. +#define BF_FTM_COMBINE_COMP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_COMP0), uint32_t) & BM_FTM_COMBINE_COMP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COMP0 field to a new value. +#define BW_FTM_COMBINE_COMP0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP0) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DECAPEN0[2] (RW) + * + * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit + * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in + * Dual Edge Capture mode according to #ModeSel1Table. This field applies only + * when FTMEN = 1. This field is write protected. It can be written only when + * MODE[WPDIS] = 1. + * + * Values: + * - 0 - The Dual Edge Capture mode in this pair of channels is disabled. + * - 1 - The Dual Edge Capture mode in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_DECAPEN0 (2U) //!< Bit position for FTM_COMBINE_DECAPEN0. +#define BM_FTM_COMBINE_DECAPEN0 (0x00000004U) //!< Bit mask for FTM_COMBINE_DECAPEN0. +#define BS_FTM_COMBINE_DECAPEN0 (1U) //!< Bit field size in bits for FTM_COMBINE_DECAPEN0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DECAPEN0 field. +#define BR_FTM_COMBINE_DECAPEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN0)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DECAPEN0. +#define BF_FTM_COMBINE_DECAPEN0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DECAPEN0), uint32_t) & BM_FTM_COMBINE_DECAPEN0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DECAPEN0 field to a new value. +#define BW_FTM_COMBINE_DECAPEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN0) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DECAP0[3] (RW) + * + * Enables the capture of the FTM counter value according to the channel (n) + * input event and the configuration of the dual edge capture bits. This field + * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by + * hardware if dual edge capture - one-shot mode is selected and when the capture + * of channel (n+1) event is made. + * + * Values: + * - 0 - The dual edge captures are inactive. + * - 1 - The dual edge captures are active. + */ +//@{ +#define BP_FTM_COMBINE_DECAP0 (3U) //!< Bit position for FTM_COMBINE_DECAP0. +#define BM_FTM_COMBINE_DECAP0 (0x00000008U) //!< Bit mask for FTM_COMBINE_DECAP0. +#define BS_FTM_COMBINE_DECAP0 (1U) //!< Bit field size in bits for FTM_COMBINE_DECAP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DECAP0 field. +#define BR_FTM_COMBINE_DECAP0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP0)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DECAP0. +#define BF_FTM_COMBINE_DECAP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DECAP0), uint32_t) & BM_FTM_COMBINE_DECAP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DECAP0 field to a new value. +#define BW_FTM_COMBINE_DECAP0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP0) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DTEN0[4] (RW) + * + * Enables the deadtime insertion in the channels (n) and (n+1). This field is + * write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The deadtime insertion in this pair of channels is disabled. + * - 1 - The deadtime insertion in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_DTEN0 (4U) //!< Bit position for FTM_COMBINE_DTEN0. +#define BM_FTM_COMBINE_DTEN0 (0x00000010U) //!< Bit mask for FTM_COMBINE_DTEN0. +#define BS_FTM_COMBINE_DTEN0 (1U) //!< Bit field size in bits for FTM_COMBINE_DTEN0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DTEN0 field. +#define BR_FTM_COMBINE_DTEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN0)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DTEN0. +#define BF_FTM_COMBINE_DTEN0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DTEN0), uint32_t) & BM_FTM_COMBINE_DTEN0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DTEN0 field to a new value. +#define BW_FTM_COMBINE_DTEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN0) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field SYNCEN0[5] (RW) + * + * Enables PWM synchronization of registers C(n)V and C(n+1)V. + * + * Values: + * - 0 - The PWM synchronization in this pair of channels is disabled. + * - 1 - The PWM synchronization in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_SYNCEN0 (5U) //!< Bit position for FTM_COMBINE_SYNCEN0. +#define BM_FTM_COMBINE_SYNCEN0 (0x00000020U) //!< Bit mask for FTM_COMBINE_SYNCEN0. +#define BS_FTM_COMBINE_SYNCEN0 (1U) //!< Bit field size in bits for FTM_COMBINE_SYNCEN0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_SYNCEN0 field. +#define BR_FTM_COMBINE_SYNCEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN0)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_SYNCEN0. +#define BF_FTM_COMBINE_SYNCEN0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_SYNCEN0), uint32_t) & BM_FTM_COMBINE_SYNCEN0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SYNCEN0 field to a new value. +#define BW_FTM_COMBINE_SYNCEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN0) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field FAULTEN0[6] (RW) + * + * Enables the fault control in channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault control in this pair of channels is disabled. + * - 1 - The fault control in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_FAULTEN0 (6U) //!< Bit position for FTM_COMBINE_FAULTEN0. +#define BM_FTM_COMBINE_FAULTEN0 (0x00000040U) //!< Bit mask for FTM_COMBINE_FAULTEN0. +#define BS_FTM_COMBINE_FAULTEN0 (1U) //!< Bit field size in bits for FTM_COMBINE_FAULTEN0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_FAULTEN0 field. +#define BR_FTM_COMBINE_FAULTEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN0)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_FAULTEN0. +#define BF_FTM_COMBINE_FAULTEN0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_FAULTEN0), uint32_t) & BM_FTM_COMBINE_FAULTEN0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULTEN0 field to a new value. +#define BW_FTM_COMBINE_FAULTEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN0) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field COMBINE1[8] (RW) + * + * Enables the combine feature for channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Channels (n) and (n+1) are independent. + * - 1 - Channels (n) and (n+1) are combined. + */ +//@{ +#define BP_FTM_COMBINE_COMBINE1 (8U) //!< Bit position for FTM_COMBINE_COMBINE1. +#define BM_FTM_COMBINE_COMBINE1 (0x00000100U) //!< Bit mask for FTM_COMBINE_COMBINE1. +#define BS_FTM_COMBINE_COMBINE1 (1U) //!< Bit field size in bits for FTM_COMBINE_COMBINE1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_COMBINE1 field. +#define BR_FTM_COMBINE_COMBINE1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE1)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_COMBINE1. +#define BF_FTM_COMBINE_COMBINE1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_COMBINE1), uint32_t) & BM_FTM_COMBINE_COMBINE1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COMBINE1 field to a new value. +#define BW_FTM_COMBINE_COMBINE1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE1) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field COMP1[9] (RW) + * + * Enables Complementary mode for the combined channels. In Complementary mode + * the channel (n+1) output is the inverse of the channel (n) output. This field + * is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel (n+1) output is the same as the channel (n) output. + * - 1 - The channel (n+1) output is the complement of the channel (n) output. + */ +//@{ +#define BP_FTM_COMBINE_COMP1 (9U) //!< Bit position for FTM_COMBINE_COMP1. +#define BM_FTM_COMBINE_COMP1 (0x00000200U) //!< Bit mask for FTM_COMBINE_COMP1. +#define BS_FTM_COMBINE_COMP1 (1U) //!< Bit field size in bits for FTM_COMBINE_COMP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_COMP1 field. +#define BR_FTM_COMBINE_COMP1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP1)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_COMP1. +#define BF_FTM_COMBINE_COMP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_COMP1), uint32_t) & BM_FTM_COMBINE_COMP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COMP1 field to a new value. +#define BW_FTM_COMBINE_COMP1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP1) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DECAPEN1[10] (RW) + * + * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit + * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in + * Dual Edge Capture mode according to #ModeSel1Table. This field applies only + * when FTMEN = 1. This field is write protected. It can be written only when + * MODE[WPDIS] = 1. + * + * Values: + * - 0 - The Dual Edge Capture mode in this pair of channels is disabled. + * - 1 - The Dual Edge Capture mode in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_DECAPEN1 (10U) //!< Bit position for FTM_COMBINE_DECAPEN1. +#define BM_FTM_COMBINE_DECAPEN1 (0x00000400U) //!< Bit mask for FTM_COMBINE_DECAPEN1. +#define BS_FTM_COMBINE_DECAPEN1 (1U) //!< Bit field size in bits for FTM_COMBINE_DECAPEN1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DECAPEN1 field. +#define BR_FTM_COMBINE_DECAPEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN1)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DECAPEN1. +#define BF_FTM_COMBINE_DECAPEN1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DECAPEN1), uint32_t) & BM_FTM_COMBINE_DECAPEN1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DECAPEN1 field to a new value. +#define BW_FTM_COMBINE_DECAPEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN1) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DECAP1[11] (RW) + * + * Enables the capture of the FTM counter value according to the channel (n) + * input event and the configuration of the dual edge capture bits. This field + * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by + * hardware if Dual Edge Capture - One-Shot mode is selected and when the capture + * of channel (n+1) event is made. + * + * Values: + * - 0 - The dual edge captures are inactive. + * - 1 - The dual edge captures are active. + */ +//@{ +#define BP_FTM_COMBINE_DECAP1 (11U) //!< Bit position for FTM_COMBINE_DECAP1. +#define BM_FTM_COMBINE_DECAP1 (0x00000800U) //!< Bit mask for FTM_COMBINE_DECAP1. +#define BS_FTM_COMBINE_DECAP1 (1U) //!< Bit field size in bits for FTM_COMBINE_DECAP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DECAP1 field. +#define BR_FTM_COMBINE_DECAP1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP1)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DECAP1. +#define BF_FTM_COMBINE_DECAP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DECAP1), uint32_t) & BM_FTM_COMBINE_DECAP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DECAP1 field to a new value. +#define BW_FTM_COMBINE_DECAP1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP1) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DTEN1[12] (RW) + * + * Enables the deadtime insertion in the channels (n) and (n+1). This field is + * write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The deadtime insertion in this pair of channels is disabled. + * - 1 - The deadtime insertion in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_DTEN1 (12U) //!< Bit position for FTM_COMBINE_DTEN1. +#define BM_FTM_COMBINE_DTEN1 (0x00001000U) //!< Bit mask for FTM_COMBINE_DTEN1. +#define BS_FTM_COMBINE_DTEN1 (1U) //!< Bit field size in bits for FTM_COMBINE_DTEN1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DTEN1 field. +#define BR_FTM_COMBINE_DTEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN1)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DTEN1. +#define BF_FTM_COMBINE_DTEN1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DTEN1), uint32_t) & BM_FTM_COMBINE_DTEN1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DTEN1 field to a new value. +#define BW_FTM_COMBINE_DTEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN1) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field SYNCEN1[13] (RW) + * + * Enables PWM synchronization of registers C(n)V and C(n+1)V. + * + * Values: + * - 0 - The PWM synchronization in this pair of channels is disabled. + * - 1 - The PWM synchronization in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_SYNCEN1 (13U) //!< Bit position for FTM_COMBINE_SYNCEN1. +#define BM_FTM_COMBINE_SYNCEN1 (0x00002000U) //!< Bit mask for FTM_COMBINE_SYNCEN1. +#define BS_FTM_COMBINE_SYNCEN1 (1U) //!< Bit field size in bits for FTM_COMBINE_SYNCEN1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_SYNCEN1 field. +#define BR_FTM_COMBINE_SYNCEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN1)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_SYNCEN1. +#define BF_FTM_COMBINE_SYNCEN1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_SYNCEN1), uint32_t) & BM_FTM_COMBINE_SYNCEN1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SYNCEN1 field to a new value. +#define BW_FTM_COMBINE_SYNCEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN1) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field FAULTEN1[14] (RW) + * + * Enables the fault control in channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault control in this pair of channels is disabled. + * - 1 - The fault control in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_FAULTEN1 (14U) //!< Bit position for FTM_COMBINE_FAULTEN1. +#define BM_FTM_COMBINE_FAULTEN1 (0x00004000U) //!< Bit mask for FTM_COMBINE_FAULTEN1. +#define BS_FTM_COMBINE_FAULTEN1 (1U) //!< Bit field size in bits for FTM_COMBINE_FAULTEN1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_FAULTEN1 field. +#define BR_FTM_COMBINE_FAULTEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN1)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_FAULTEN1. +#define BF_FTM_COMBINE_FAULTEN1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_FAULTEN1), uint32_t) & BM_FTM_COMBINE_FAULTEN1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULTEN1 field to a new value. +#define BW_FTM_COMBINE_FAULTEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN1) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field COMBINE2[16] (RW) + * + * Enables the combine feature for channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Channels (n) and (n+1) are independent. + * - 1 - Channels (n) and (n+1) are combined. + */ +//@{ +#define BP_FTM_COMBINE_COMBINE2 (16U) //!< Bit position for FTM_COMBINE_COMBINE2. +#define BM_FTM_COMBINE_COMBINE2 (0x00010000U) //!< Bit mask for FTM_COMBINE_COMBINE2. +#define BS_FTM_COMBINE_COMBINE2 (1U) //!< Bit field size in bits for FTM_COMBINE_COMBINE2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_COMBINE2 field. +#define BR_FTM_COMBINE_COMBINE2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE2)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_COMBINE2. +#define BF_FTM_COMBINE_COMBINE2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_COMBINE2), uint32_t) & BM_FTM_COMBINE_COMBINE2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COMBINE2 field to a new value. +#define BW_FTM_COMBINE_COMBINE2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE2) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field COMP2[17] (RW) + * + * Enables Complementary mode for the combined channels. In Complementary mode + * the channel (n+1) output is the inverse of the channel (n) output. This field + * is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel (n+1) output is the same as the channel (n) output. + * - 1 - The channel (n+1) output is the complement of the channel (n) output. + */ +//@{ +#define BP_FTM_COMBINE_COMP2 (17U) //!< Bit position for FTM_COMBINE_COMP2. +#define BM_FTM_COMBINE_COMP2 (0x00020000U) //!< Bit mask for FTM_COMBINE_COMP2. +#define BS_FTM_COMBINE_COMP2 (1U) //!< Bit field size in bits for FTM_COMBINE_COMP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_COMP2 field. +#define BR_FTM_COMBINE_COMP2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP2)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_COMP2. +#define BF_FTM_COMBINE_COMP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_COMP2), uint32_t) & BM_FTM_COMBINE_COMP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COMP2 field to a new value. +#define BW_FTM_COMBINE_COMP2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP2) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DECAPEN2[18] (RW) + * + * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit + * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in + * Dual Edge Capture mode according to #ModeSel1Table. This field applies only + * when FTMEN = 1. This field is write protected. It can be written only when + * MODE[WPDIS] = 1. + * + * Values: + * - 0 - The Dual Edge Capture mode in this pair of channels is disabled. + * - 1 - The Dual Edge Capture mode in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_DECAPEN2 (18U) //!< Bit position for FTM_COMBINE_DECAPEN2. +#define BM_FTM_COMBINE_DECAPEN2 (0x00040000U) //!< Bit mask for FTM_COMBINE_DECAPEN2. +#define BS_FTM_COMBINE_DECAPEN2 (1U) //!< Bit field size in bits for FTM_COMBINE_DECAPEN2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DECAPEN2 field. +#define BR_FTM_COMBINE_DECAPEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN2)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DECAPEN2. +#define BF_FTM_COMBINE_DECAPEN2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DECAPEN2), uint32_t) & BM_FTM_COMBINE_DECAPEN2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DECAPEN2 field to a new value. +#define BW_FTM_COMBINE_DECAPEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN2) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DECAP2[19] (RW) + * + * Enables the capture of the FTM counter value according to the channel (n) + * input event and the configuration of the dual edge capture bits. This field + * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by + * hardware if dual edge capture - one-shot mode is selected and when the capture + * of channel (n+1) event is made. + * + * Values: + * - 0 - The dual edge captures are inactive. + * - 1 - The dual edge captures are active. + */ +//@{ +#define BP_FTM_COMBINE_DECAP2 (19U) //!< Bit position for FTM_COMBINE_DECAP2. +#define BM_FTM_COMBINE_DECAP2 (0x00080000U) //!< Bit mask for FTM_COMBINE_DECAP2. +#define BS_FTM_COMBINE_DECAP2 (1U) //!< Bit field size in bits for FTM_COMBINE_DECAP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DECAP2 field. +#define BR_FTM_COMBINE_DECAP2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP2)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DECAP2. +#define BF_FTM_COMBINE_DECAP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DECAP2), uint32_t) & BM_FTM_COMBINE_DECAP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DECAP2 field to a new value. +#define BW_FTM_COMBINE_DECAP2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP2) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DTEN2[20] (RW) + * + * Enables the deadtime insertion in the channels (n) and (n+1). This field is + * write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The deadtime insertion in this pair of channels is disabled. + * - 1 - The deadtime insertion in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_DTEN2 (20U) //!< Bit position for FTM_COMBINE_DTEN2. +#define BM_FTM_COMBINE_DTEN2 (0x00100000U) //!< Bit mask for FTM_COMBINE_DTEN2. +#define BS_FTM_COMBINE_DTEN2 (1U) //!< Bit field size in bits for FTM_COMBINE_DTEN2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DTEN2 field. +#define BR_FTM_COMBINE_DTEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN2)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DTEN2. +#define BF_FTM_COMBINE_DTEN2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DTEN2), uint32_t) & BM_FTM_COMBINE_DTEN2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DTEN2 field to a new value. +#define BW_FTM_COMBINE_DTEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN2) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field SYNCEN2[21] (RW) + * + * Enables PWM synchronization of registers C(n)V and C(n+1)V. + * + * Values: + * - 0 - The PWM synchronization in this pair of channels is disabled. + * - 1 - The PWM synchronization in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_SYNCEN2 (21U) //!< Bit position for FTM_COMBINE_SYNCEN2. +#define BM_FTM_COMBINE_SYNCEN2 (0x00200000U) //!< Bit mask for FTM_COMBINE_SYNCEN2. +#define BS_FTM_COMBINE_SYNCEN2 (1U) //!< Bit field size in bits for FTM_COMBINE_SYNCEN2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_SYNCEN2 field. +#define BR_FTM_COMBINE_SYNCEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN2)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_SYNCEN2. +#define BF_FTM_COMBINE_SYNCEN2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_SYNCEN2), uint32_t) & BM_FTM_COMBINE_SYNCEN2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SYNCEN2 field to a new value. +#define BW_FTM_COMBINE_SYNCEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN2) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field FAULTEN2[22] (RW) + * + * Enables the fault control in channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault control in this pair of channels is disabled. + * - 1 - The fault control in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_FAULTEN2 (22U) //!< Bit position for FTM_COMBINE_FAULTEN2. +#define BM_FTM_COMBINE_FAULTEN2 (0x00400000U) //!< Bit mask for FTM_COMBINE_FAULTEN2. +#define BS_FTM_COMBINE_FAULTEN2 (1U) //!< Bit field size in bits for FTM_COMBINE_FAULTEN2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_FAULTEN2 field. +#define BR_FTM_COMBINE_FAULTEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN2)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_FAULTEN2. +#define BF_FTM_COMBINE_FAULTEN2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_FAULTEN2), uint32_t) & BM_FTM_COMBINE_FAULTEN2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULTEN2 field to a new value. +#define BW_FTM_COMBINE_FAULTEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN2) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field COMBINE3[24] (RW) + * + * Enables the combine feature for channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Channels (n) and (n+1) are independent. + * - 1 - Channels (n) and (n+1) are combined. + */ +//@{ +#define BP_FTM_COMBINE_COMBINE3 (24U) //!< Bit position for FTM_COMBINE_COMBINE3. +#define BM_FTM_COMBINE_COMBINE3 (0x01000000U) //!< Bit mask for FTM_COMBINE_COMBINE3. +#define BS_FTM_COMBINE_COMBINE3 (1U) //!< Bit field size in bits for FTM_COMBINE_COMBINE3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_COMBINE3 field. +#define BR_FTM_COMBINE_COMBINE3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE3)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_COMBINE3. +#define BF_FTM_COMBINE_COMBINE3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_COMBINE3), uint32_t) & BM_FTM_COMBINE_COMBINE3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COMBINE3 field to a new value. +#define BW_FTM_COMBINE_COMBINE3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE3) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field COMP3[25] (RW) + * + * Enables Complementary mode for the combined channels. In Complementary mode + * the channel (n+1) output is the inverse of the channel (n) output. This field + * is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel (n+1) output is the same as the channel (n) output. + * - 1 - The channel (n+1) output is the complement of the channel (n) output. + */ +//@{ +#define BP_FTM_COMBINE_COMP3 (25U) //!< Bit position for FTM_COMBINE_COMP3. +#define BM_FTM_COMBINE_COMP3 (0x02000000U) //!< Bit mask for FTM_COMBINE_COMP3. +#define BS_FTM_COMBINE_COMP3 (1U) //!< Bit field size in bits for FTM_COMBINE_COMP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_COMP3 field. +#define BR_FTM_COMBINE_COMP3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP3)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_COMP3. +#define BF_FTM_COMBINE_COMP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_COMP3), uint32_t) & BM_FTM_COMBINE_COMP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the COMP3 field to a new value. +#define BW_FTM_COMBINE_COMP3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP3) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DECAPEN3[26] (RW) + * + * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit + * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in + * Dual Edge Capture mode according to #ModeSel1Table. This field applies only + * when FTMEN = 1. This field is write protected. It can be written only when + * MODE[WPDIS] = 1. + * + * Values: + * - 0 - The Dual Edge Capture mode in this pair of channels is disabled. + * - 1 - The Dual Edge Capture mode in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_DECAPEN3 (26U) //!< Bit position for FTM_COMBINE_DECAPEN3. +#define BM_FTM_COMBINE_DECAPEN3 (0x04000000U) //!< Bit mask for FTM_COMBINE_DECAPEN3. +#define BS_FTM_COMBINE_DECAPEN3 (1U) //!< Bit field size in bits for FTM_COMBINE_DECAPEN3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DECAPEN3 field. +#define BR_FTM_COMBINE_DECAPEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN3)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DECAPEN3. +#define BF_FTM_COMBINE_DECAPEN3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DECAPEN3), uint32_t) & BM_FTM_COMBINE_DECAPEN3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DECAPEN3 field to a new value. +#define BW_FTM_COMBINE_DECAPEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN3) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DECAP3[27] (RW) + * + * Enables the capture of the FTM counter value according to the channel (n) + * input event and the configuration of the dual edge capture bits. This field + * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by + * hardware if dual edge capture - one-shot mode is selected and when the capture + * of channel (n+1) event is made. + * + * Values: + * - 0 - The dual edge captures are inactive. + * - 1 - The dual edge captures are active. + */ +//@{ +#define BP_FTM_COMBINE_DECAP3 (27U) //!< Bit position for FTM_COMBINE_DECAP3. +#define BM_FTM_COMBINE_DECAP3 (0x08000000U) //!< Bit mask for FTM_COMBINE_DECAP3. +#define BS_FTM_COMBINE_DECAP3 (1U) //!< Bit field size in bits for FTM_COMBINE_DECAP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DECAP3 field. +#define BR_FTM_COMBINE_DECAP3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP3)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DECAP3. +#define BF_FTM_COMBINE_DECAP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DECAP3), uint32_t) & BM_FTM_COMBINE_DECAP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DECAP3 field to a new value. +#define BW_FTM_COMBINE_DECAP3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP3) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field DTEN3[28] (RW) + * + * Enables the deadtime insertion in the channels (n) and (n+1). This field is + * write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The deadtime insertion in this pair of channels is disabled. + * - 1 - The deadtime insertion in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_DTEN3 (28U) //!< Bit position for FTM_COMBINE_DTEN3. +#define BM_FTM_COMBINE_DTEN3 (0x10000000U) //!< Bit mask for FTM_COMBINE_DTEN3. +#define BS_FTM_COMBINE_DTEN3 (1U) //!< Bit field size in bits for FTM_COMBINE_DTEN3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_DTEN3 field. +#define BR_FTM_COMBINE_DTEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN3)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_DTEN3. +#define BF_FTM_COMBINE_DTEN3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_DTEN3), uint32_t) & BM_FTM_COMBINE_DTEN3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DTEN3 field to a new value. +#define BW_FTM_COMBINE_DTEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN3) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field SYNCEN3[29] (RW) + * + * Enables PWM synchronization of registers C(n)V and C(n+1)V. + * + * Values: + * - 0 - The PWM synchronization in this pair of channels is disabled. + * - 1 - The PWM synchronization in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_SYNCEN3 (29U) //!< Bit position for FTM_COMBINE_SYNCEN3. +#define BM_FTM_COMBINE_SYNCEN3 (0x20000000U) //!< Bit mask for FTM_COMBINE_SYNCEN3. +#define BS_FTM_COMBINE_SYNCEN3 (1U) //!< Bit field size in bits for FTM_COMBINE_SYNCEN3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_SYNCEN3 field. +#define BR_FTM_COMBINE_SYNCEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN3)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_SYNCEN3. +#define BF_FTM_COMBINE_SYNCEN3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_SYNCEN3), uint32_t) & BM_FTM_COMBINE_SYNCEN3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SYNCEN3 field to a new value. +#define BW_FTM_COMBINE_SYNCEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN3) = (v)) +#endif +//@} + +/*! + * @name Register FTM_COMBINE, field FAULTEN3[30] (RW) + * + * Enables the fault control in channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault control in this pair of channels is disabled. + * - 1 - The fault control in this pair of channels is enabled. + */ +//@{ +#define BP_FTM_COMBINE_FAULTEN3 (30U) //!< Bit position for FTM_COMBINE_FAULTEN3. +#define BM_FTM_COMBINE_FAULTEN3 (0x40000000U) //!< Bit mask for FTM_COMBINE_FAULTEN3. +#define BS_FTM_COMBINE_FAULTEN3 (1U) //!< Bit field size in bits for FTM_COMBINE_FAULTEN3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_COMBINE_FAULTEN3 field. +#define BR_FTM_COMBINE_FAULTEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN3)) +#endif + +//! @brief Format value for bitfield FTM_COMBINE_FAULTEN3. +#define BF_FTM_COMBINE_FAULTEN3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_COMBINE_FAULTEN3), uint32_t) & BM_FTM_COMBINE_FAULTEN3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULTEN3 field to a new value. +#define BW_FTM_COMBINE_FAULTEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN3) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_DEADTIME - Deadtime Insertion Control +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_DEADTIME - Deadtime Insertion Control (RW) + * + * Reset value: 0x00000000U + * + * This register selects the deadtime prescaler factor and deadtime value. All + * FTM channels use this clock prescaler and this deadtime value for the deadtime + * insertion. + */ +typedef union _hw_ftm_deadtime +{ + uint32_t U; + struct _hw_ftm_deadtime_bitfields + { + uint32_t DTVAL : 6; //!< [5:0] Deadtime Value + uint32_t DTPS : 2; //!< [7:6] Deadtime Prescaler Value + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_deadtime_t; +#endif + +/*! + * @name Constants and macros for entire FTM_DEADTIME register + */ +//@{ +#define HW_FTM_DEADTIME_ADDR(x) (REGS_FTM_BASE(x) + 0x68U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_DEADTIME(x) (*(__IO hw_ftm_deadtime_t *) HW_FTM_DEADTIME_ADDR(x)) +#define HW_FTM_DEADTIME_RD(x) (HW_FTM_DEADTIME(x).U) +#define HW_FTM_DEADTIME_WR(x, v) (HW_FTM_DEADTIME(x).U = (v)) +#define HW_FTM_DEADTIME_SET(x, v) (HW_FTM_DEADTIME_WR(x, HW_FTM_DEADTIME_RD(x) | (v))) +#define HW_FTM_DEADTIME_CLR(x, v) (HW_FTM_DEADTIME_WR(x, HW_FTM_DEADTIME_RD(x) & ~(v))) +#define HW_FTM_DEADTIME_TOG(x, v) (HW_FTM_DEADTIME_WR(x, HW_FTM_DEADTIME_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_DEADTIME bitfields + */ + +/*! + * @name Register FTM_DEADTIME, field DTVAL[5:0] (RW) + * + * Selects the deadtime insertion value for the deadtime counter. The deadtime + * counter is clocked by a scaled version of the system clock. See the description + * of DTPS. Deadtime insert value = (DTPS * DTVAL). DTVAL selects the number of + * deadtime counts inserted as follows: When DTVAL is 0, no counts are inserted. + * When DTVAL is 1, 1 count is inserted. When DTVAL is 2, 2 counts are inserted. + * This pattern continues up to a possible 63 counts. This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + */ +//@{ +#define BP_FTM_DEADTIME_DTVAL (0U) //!< Bit position for FTM_DEADTIME_DTVAL. +#define BM_FTM_DEADTIME_DTVAL (0x0000003FU) //!< Bit mask for FTM_DEADTIME_DTVAL. +#define BS_FTM_DEADTIME_DTVAL (6U) //!< Bit field size in bits for FTM_DEADTIME_DTVAL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_DEADTIME_DTVAL field. +#define BR_FTM_DEADTIME_DTVAL(x) (HW_FTM_DEADTIME(x).B.DTVAL) +#endif + +//! @brief Format value for bitfield FTM_DEADTIME_DTVAL. +#define BF_FTM_DEADTIME_DTVAL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_DEADTIME_DTVAL), uint32_t) & BM_FTM_DEADTIME_DTVAL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DTVAL field to a new value. +#define BW_FTM_DEADTIME_DTVAL(x, v) (HW_FTM_DEADTIME_WR(x, (HW_FTM_DEADTIME_RD(x) & ~BM_FTM_DEADTIME_DTVAL) | BF_FTM_DEADTIME_DTVAL(v))) +#endif +//@} + +/*! + * @name Register FTM_DEADTIME, field DTPS[7:6] (RW) + * + * Selects the division factor of the system clock. This prescaled clock is used + * by the deadtime counter. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0x - Divide the system clock by 1. + * - 10 - Divide the system clock by 4. + * - 11 - Divide the system clock by 16. + */ +//@{ +#define BP_FTM_DEADTIME_DTPS (6U) //!< Bit position for FTM_DEADTIME_DTPS. +#define BM_FTM_DEADTIME_DTPS (0x000000C0U) //!< Bit mask for FTM_DEADTIME_DTPS. +#define BS_FTM_DEADTIME_DTPS (2U) //!< Bit field size in bits for FTM_DEADTIME_DTPS. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_DEADTIME_DTPS field. +#define BR_FTM_DEADTIME_DTPS(x) (HW_FTM_DEADTIME(x).B.DTPS) +#endif + +//! @brief Format value for bitfield FTM_DEADTIME_DTPS. +#define BF_FTM_DEADTIME_DTPS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_DEADTIME_DTPS), uint32_t) & BM_FTM_DEADTIME_DTPS) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DTPS field to a new value. +#define BW_FTM_DEADTIME_DTPS(x, v) (HW_FTM_DEADTIME_WR(x, (HW_FTM_DEADTIME_RD(x) & ~BM_FTM_DEADTIME_DTPS) | BF_FTM_DEADTIME_DTPS(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_EXTTRIG - FTM External Trigger +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_EXTTRIG - FTM External Trigger (RW) + * + * Reset value: 0x00000000U + * + * This register: Indicates when a channel trigger was generated Enables the + * generation of a trigger when the FTM counter is equal to its initial value + * Selects which channels are used in the generation of the channel triggers Several + * channels can be selected to generate multiple triggers in one PWM period. + * Channels 6 and 7 are not used to generate channel triggers. + */ +typedef union _hw_ftm_exttrig +{ + uint32_t U; + struct _hw_ftm_exttrig_bitfields + { + uint32_t CH2TRIG : 1; //!< [0] Channel 2 Trigger Enable + uint32_t CH3TRIG : 1; //!< [1] Channel 3 Trigger Enable + uint32_t CH4TRIG : 1; //!< [2] Channel 4 Trigger Enable + uint32_t CH5TRIG : 1; //!< [3] Channel 5 Trigger Enable + uint32_t CH0TRIG : 1; //!< [4] Channel 0 Trigger Enable + uint32_t CH1TRIG : 1; //!< [5] Channel 1 Trigger Enable + uint32_t INITTRIGEN : 1; //!< [6] Initialization Trigger Enable + uint32_t TRIGF : 1; //!< [7] Channel Trigger Flag + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_exttrig_t; +#endif + +/*! + * @name Constants and macros for entire FTM_EXTTRIG register + */ +//@{ +#define HW_FTM_EXTTRIG_ADDR(x) (REGS_FTM_BASE(x) + 0x6CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_EXTTRIG(x) (*(__IO hw_ftm_exttrig_t *) HW_FTM_EXTTRIG_ADDR(x)) +#define HW_FTM_EXTTRIG_RD(x) (HW_FTM_EXTTRIG(x).U) +#define HW_FTM_EXTTRIG_WR(x, v) (HW_FTM_EXTTRIG(x).U = (v)) +#define HW_FTM_EXTTRIG_SET(x, v) (HW_FTM_EXTTRIG_WR(x, HW_FTM_EXTTRIG_RD(x) | (v))) +#define HW_FTM_EXTTRIG_CLR(x, v) (HW_FTM_EXTTRIG_WR(x, HW_FTM_EXTTRIG_RD(x) & ~(v))) +#define HW_FTM_EXTTRIG_TOG(x, v) (HW_FTM_EXTTRIG_WR(x, HW_FTM_EXTTRIG_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_EXTTRIG bitfields + */ + +/*! + * @name Register FTM_EXTTRIG, field CH2TRIG[0] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +//@{ +#define BP_FTM_EXTTRIG_CH2TRIG (0U) //!< Bit position for FTM_EXTTRIG_CH2TRIG. +#define BM_FTM_EXTTRIG_CH2TRIG (0x00000001U) //!< Bit mask for FTM_EXTTRIG_CH2TRIG. +#define BS_FTM_EXTTRIG_CH2TRIG (1U) //!< Bit field size in bits for FTM_EXTTRIG_CH2TRIG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_EXTTRIG_CH2TRIG field. +#define BR_FTM_EXTTRIG_CH2TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH2TRIG)) +#endif + +//! @brief Format value for bitfield FTM_EXTTRIG_CH2TRIG. +#define BF_FTM_EXTTRIG_CH2TRIG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_EXTTRIG_CH2TRIG), uint32_t) & BM_FTM_EXTTRIG_CH2TRIG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH2TRIG field to a new value. +#define BW_FTM_EXTTRIG_CH2TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH2TRIG) = (v)) +#endif +//@} + +/*! + * @name Register FTM_EXTTRIG, field CH3TRIG[1] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +//@{ +#define BP_FTM_EXTTRIG_CH3TRIG (1U) //!< Bit position for FTM_EXTTRIG_CH3TRIG. +#define BM_FTM_EXTTRIG_CH3TRIG (0x00000002U) //!< Bit mask for FTM_EXTTRIG_CH3TRIG. +#define BS_FTM_EXTTRIG_CH3TRIG (1U) //!< Bit field size in bits for FTM_EXTTRIG_CH3TRIG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_EXTTRIG_CH3TRIG field. +#define BR_FTM_EXTTRIG_CH3TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH3TRIG)) +#endif + +//! @brief Format value for bitfield FTM_EXTTRIG_CH3TRIG. +#define BF_FTM_EXTTRIG_CH3TRIG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_EXTTRIG_CH3TRIG), uint32_t) & BM_FTM_EXTTRIG_CH3TRIG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH3TRIG field to a new value. +#define BW_FTM_EXTTRIG_CH3TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH3TRIG) = (v)) +#endif +//@} + +/*! + * @name Register FTM_EXTTRIG, field CH4TRIG[2] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +//@{ +#define BP_FTM_EXTTRIG_CH4TRIG (2U) //!< Bit position for FTM_EXTTRIG_CH4TRIG. +#define BM_FTM_EXTTRIG_CH4TRIG (0x00000004U) //!< Bit mask for FTM_EXTTRIG_CH4TRIG. +#define BS_FTM_EXTTRIG_CH4TRIG (1U) //!< Bit field size in bits for FTM_EXTTRIG_CH4TRIG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_EXTTRIG_CH4TRIG field. +#define BR_FTM_EXTTRIG_CH4TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH4TRIG)) +#endif + +//! @brief Format value for bitfield FTM_EXTTRIG_CH4TRIG. +#define BF_FTM_EXTTRIG_CH4TRIG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_EXTTRIG_CH4TRIG), uint32_t) & BM_FTM_EXTTRIG_CH4TRIG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH4TRIG field to a new value. +#define BW_FTM_EXTTRIG_CH4TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH4TRIG) = (v)) +#endif +//@} + +/*! + * @name Register FTM_EXTTRIG, field CH5TRIG[3] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +//@{ +#define BP_FTM_EXTTRIG_CH5TRIG (3U) //!< Bit position for FTM_EXTTRIG_CH5TRIG. +#define BM_FTM_EXTTRIG_CH5TRIG (0x00000008U) //!< Bit mask for FTM_EXTTRIG_CH5TRIG. +#define BS_FTM_EXTTRIG_CH5TRIG (1U) //!< Bit field size in bits for FTM_EXTTRIG_CH5TRIG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_EXTTRIG_CH5TRIG field. +#define BR_FTM_EXTTRIG_CH5TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH5TRIG)) +#endif + +//! @brief Format value for bitfield FTM_EXTTRIG_CH5TRIG. +#define BF_FTM_EXTTRIG_CH5TRIG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_EXTTRIG_CH5TRIG), uint32_t) & BM_FTM_EXTTRIG_CH5TRIG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH5TRIG field to a new value. +#define BW_FTM_EXTTRIG_CH5TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH5TRIG) = (v)) +#endif +//@} + +/*! + * @name Register FTM_EXTTRIG, field CH0TRIG[4] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +//@{ +#define BP_FTM_EXTTRIG_CH0TRIG (4U) //!< Bit position for FTM_EXTTRIG_CH0TRIG. +#define BM_FTM_EXTTRIG_CH0TRIG (0x00000010U) //!< Bit mask for FTM_EXTTRIG_CH0TRIG. +#define BS_FTM_EXTTRIG_CH0TRIG (1U) //!< Bit field size in bits for FTM_EXTTRIG_CH0TRIG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_EXTTRIG_CH0TRIG field. +#define BR_FTM_EXTTRIG_CH0TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH0TRIG)) +#endif + +//! @brief Format value for bitfield FTM_EXTTRIG_CH0TRIG. +#define BF_FTM_EXTTRIG_CH0TRIG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_EXTTRIG_CH0TRIG), uint32_t) & BM_FTM_EXTTRIG_CH0TRIG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH0TRIG field to a new value. +#define BW_FTM_EXTTRIG_CH0TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH0TRIG) = (v)) +#endif +//@} + +/*! + * @name Register FTM_EXTTRIG, field CH1TRIG[5] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +//@{ +#define BP_FTM_EXTTRIG_CH1TRIG (5U) //!< Bit position for FTM_EXTTRIG_CH1TRIG. +#define BM_FTM_EXTTRIG_CH1TRIG (0x00000020U) //!< Bit mask for FTM_EXTTRIG_CH1TRIG. +#define BS_FTM_EXTTRIG_CH1TRIG (1U) //!< Bit field size in bits for FTM_EXTTRIG_CH1TRIG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_EXTTRIG_CH1TRIG field. +#define BR_FTM_EXTTRIG_CH1TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH1TRIG)) +#endif + +//! @brief Format value for bitfield FTM_EXTTRIG_CH1TRIG. +#define BF_FTM_EXTTRIG_CH1TRIG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_EXTTRIG_CH1TRIG), uint32_t) & BM_FTM_EXTTRIG_CH1TRIG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH1TRIG field to a new value. +#define BW_FTM_EXTTRIG_CH1TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH1TRIG) = (v)) +#endif +//@} + +/*! + * @name Register FTM_EXTTRIG, field INITTRIGEN[6] (RW) + * + * Enables the generation of the trigger when the FTM counter is equal to the + * CNTIN register. + * + * Values: + * - 0 - The generation of initialization trigger is disabled. + * - 1 - The generation of initialization trigger is enabled. + */ +//@{ +#define BP_FTM_EXTTRIG_INITTRIGEN (6U) //!< Bit position for FTM_EXTTRIG_INITTRIGEN. +#define BM_FTM_EXTTRIG_INITTRIGEN (0x00000040U) //!< Bit mask for FTM_EXTTRIG_INITTRIGEN. +#define BS_FTM_EXTTRIG_INITTRIGEN (1U) //!< Bit field size in bits for FTM_EXTTRIG_INITTRIGEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_EXTTRIG_INITTRIGEN field. +#define BR_FTM_EXTTRIG_INITTRIGEN(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_INITTRIGEN)) +#endif + +//! @brief Format value for bitfield FTM_EXTTRIG_INITTRIGEN. +#define BF_FTM_EXTTRIG_INITTRIGEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_EXTTRIG_INITTRIGEN), uint32_t) & BM_FTM_EXTTRIG_INITTRIGEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the INITTRIGEN field to a new value. +#define BW_FTM_EXTTRIG_INITTRIGEN(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_INITTRIGEN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_EXTTRIG, field TRIGF[7] (ROWZ) + * + * Set by hardware when a channel trigger is generated. Clear TRIGF by reading + * EXTTRIG while TRIGF is set and then writing a 0 to TRIGF. Writing a 1 to TRIGF + * has no effect. If another channel trigger is generated before the clearing + * sequence is completed, the sequence is reset so TRIGF remains set after the clear + * sequence is completed for the earlier TRIGF. + * + * Values: + * - 0 - No channel trigger was generated. + * - 1 - A channel trigger was generated. + */ +//@{ +#define BP_FTM_EXTTRIG_TRIGF (7U) //!< Bit position for FTM_EXTTRIG_TRIGF. +#define BM_FTM_EXTTRIG_TRIGF (0x00000080U) //!< Bit mask for FTM_EXTTRIG_TRIGF. +#define BS_FTM_EXTTRIG_TRIGF (1U) //!< Bit field size in bits for FTM_EXTTRIG_TRIGF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_EXTTRIG_TRIGF field. +#define BR_FTM_EXTTRIG_TRIGF(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_TRIGF)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_POL - Channels Polarity +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_POL - Channels Polarity (RW) + * + * Reset value: 0x00000000U + * + * This register defines the output polarity of the FTM channels. The safe value + * that is driven in a channel output when the fault control is enabled and a + * fault condition is detected is the inactive state of the channel. That is, the + * safe value of a channel is the value of its POL bit. + */ +typedef union _hw_ftm_pol +{ + uint32_t U; + struct _hw_ftm_pol_bitfields + { + uint32_t POL0 : 1; //!< [0] Channel 0 Polarity + uint32_t POL1 : 1; //!< [1] Channel 1 Polarity + uint32_t POL2 : 1; //!< [2] Channel 2 Polarity + uint32_t POL3 : 1; //!< [3] Channel 3 Polarity + uint32_t POL4 : 1; //!< [4] Channel 4 Polarity + uint32_t POL5 : 1; //!< [5] Channel 5 Polarity + uint32_t POL6 : 1; //!< [6] Channel 6 Polarity + uint32_t POL7 : 1; //!< [7] Channel 7 Polarity + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_pol_t; +#endif + +/*! + * @name Constants and macros for entire FTM_POL register + */ +//@{ +#define HW_FTM_POL_ADDR(x) (REGS_FTM_BASE(x) + 0x70U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_POL(x) (*(__IO hw_ftm_pol_t *) HW_FTM_POL_ADDR(x)) +#define HW_FTM_POL_RD(x) (HW_FTM_POL(x).U) +#define HW_FTM_POL_WR(x, v) (HW_FTM_POL(x).U = (v)) +#define HW_FTM_POL_SET(x, v) (HW_FTM_POL_WR(x, HW_FTM_POL_RD(x) | (v))) +#define HW_FTM_POL_CLR(x, v) (HW_FTM_POL_WR(x, HW_FTM_POL_RD(x) & ~(v))) +#define HW_FTM_POL_TOG(x, v) (HW_FTM_POL_WR(x, HW_FTM_POL_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_POL bitfields + */ + +/*! + * @name Register FTM_POL, field POL0[0] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +//@{ +#define BP_FTM_POL_POL0 (0U) //!< Bit position for FTM_POL_POL0. +#define BM_FTM_POL_POL0 (0x00000001U) //!< Bit mask for FTM_POL_POL0. +#define BS_FTM_POL_POL0 (1U) //!< Bit field size in bits for FTM_POL_POL0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_POL_POL0 field. +#define BR_FTM_POL_POL0(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL0)) +#endif + +//! @brief Format value for bitfield FTM_POL_POL0. +#define BF_FTM_POL_POL0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_POL_POL0), uint32_t) & BM_FTM_POL_POL0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the POL0 field to a new value. +#define BW_FTM_POL_POL0(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL0) = (v)) +#endif +//@} + +/*! + * @name Register FTM_POL, field POL1[1] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +//@{ +#define BP_FTM_POL_POL1 (1U) //!< Bit position for FTM_POL_POL1. +#define BM_FTM_POL_POL1 (0x00000002U) //!< Bit mask for FTM_POL_POL1. +#define BS_FTM_POL_POL1 (1U) //!< Bit field size in bits for FTM_POL_POL1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_POL_POL1 field. +#define BR_FTM_POL_POL1(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL1)) +#endif + +//! @brief Format value for bitfield FTM_POL_POL1. +#define BF_FTM_POL_POL1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_POL_POL1), uint32_t) & BM_FTM_POL_POL1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the POL1 field to a new value. +#define BW_FTM_POL_POL1(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL1) = (v)) +#endif +//@} + +/*! + * @name Register FTM_POL, field POL2[2] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +//@{ +#define BP_FTM_POL_POL2 (2U) //!< Bit position for FTM_POL_POL2. +#define BM_FTM_POL_POL2 (0x00000004U) //!< Bit mask for FTM_POL_POL2. +#define BS_FTM_POL_POL2 (1U) //!< Bit field size in bits for FTM_POL_POL2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_POL_POL2 field. +#define BR_FTM_POL_POL2(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL2)) +#endif + +//! @brief Format value for bitfield FTM_POL_POL2. +#define BF_FTM_POL_POL2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_POL_POL2), uint32_t) & BM_FTM_POL_POL2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the POL2 field to a new value. +#define BW_FTM_POL_POL2(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL2) = (v)) +#endif +//@} + +/*! + * @name Register FTM_POL, field POL3[3] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +//@{ +#define BP_FTM_POL_POL3 (3U) //!< Bit position for FTM_POL_POL3. +#define BM_FTM_POL_POL3 (0x00000008U) //!< Bit mask for FTM_POL_POL3. +#define BS_FTM_POL_POL3 (1U) //!< Bit field size in bits for FTM_POL_POL3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_POL_POL3 field. +#define BR_FTM_POL_POL3(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL3)) +#endif + +//! @brief Format value for bitfield FTM_POL_POL3. +#define BF_FTM_POL_POL3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_POL_POL3), uint32_t) & BM_FTM_POL_POL3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the POL3 field to a new value. +#define BW_FTM_POL_POL3(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL3) = (v)) +#endif +//@} + +/*! + * @name Register FTM_POL, field POL4[4] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +//@{ +#define BP_FTM_POL_POL4 (4U) //!< Bit position for FTM_POL_POL4. +#define BM_FTM_POL_POL4 (0x00000010U) //!< Bit mask for FTM_POL_POL4. +#define BS_FTM_POL_POL4 (1U) //!< Bit field size in bits for FTM_POL_POL4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_POL_POL4 field. +#define BR_FTM_POL_POL4(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL4)) +#endif + +//! @brief Format value for bitfield FTM_POL_POL4. +#define BF_FTM_POL_POL4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_POL_POL4), uint32_t) & BM_FTM_POL_POL4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the POL4 field to a new value. +#define BW_FTM_POL_POL4(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL4) = (v)) +#endif +//@} + +/*! + * @name Register FTM_POL, field POL5[5] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +//@{ +#define BP_FTM_POL_POL5 (5U) //!< Bit position for FTM_POL_POL5. +#define BM_FTM_POL_POL5 (0x00000020U) //!< Bit mask for FTM_POL_POL5. +#define BS_FTM_POL_POL5 (1U) //!< Bit field size in bits for FTM_POL_POL5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_POL_POL5 field. +#define BR_FTM_POL_POL5(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL5)) +#endif + +//! @brief Format value for bitfield FTM_POL_POL5. +#define BF_FTM_POL_POL5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_POL_POL5), uint32_t) & BM_FTM_POL_POL5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the POL5 field to a new value. +#define BW_FTM_POL_POL5(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL5) = (v)) +#endif +//@} + +/*! + * @name Register FTM_POL, field POL6[6] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +//@{ +#define BP_FTM_POL_POL6 (6U) //!< Bit position for FTM_POL_POL6. +#define BM_FTM_POL_POL6 (0x00000040U) //!< Bit mask for FTM_POL_POL6. +#define BS_FTM_POL_POL6 (1U) //!< Bit field size in bits for FTM_POL_POL6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_POL_POL6 field. +#define BR_FTM_POL_POL6(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL6)) +#endif + +//! @brief Format value for bitfield FTM_POL_POL6. +#define BF_FTM_POL_POL6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_POL_POL6), uint32_t) & BM_FTM_POL_POL6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the POL6 field to a new value. +#define BW_FTM_POL_POL6(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL6) = (v)) +#endif +//@} + +/*! + * @name Register FTM_POL, field POL7[7] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +//@{ +#define BP_FTM_POL_POL7 (7U) //!< Bit position for FTM_POL_POL7. +#define BM_FTM_POL_POL7 (0x00000080U) //!< Bit mask for FTM_POL_POL7. +#define BS_FTM_POL_POL7 (1U) //!< Bit field size in bits for FTM_POL_POL7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_POL_POL7 field. +#define BR_FTM_POL_POL7(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL7)) +#endif + +//! @brief Format value for bitfield FTM_POL_POL7. +#define BF_FTM_POL_POL7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_POL_POL7), uint32_t) & BM_FTM_POL_POL7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the POL7 field to a new value. +#define BW_FTM_POL_POL7(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL7) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_FMS - Fault Mode Status +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_FMS - Fault Mode Status (RW) + * + * Reset value: 0x00000000U + * + * This register contains the fault detection flags, write protection enable + * bit, and the logic OR of the enabled fault inputs. + */ +typedef union _hw_ftm_fms +{ + uint32_t U; + struct _hw_ftm_fms_bitfields + { + uint32_t FAULTF0 : 1; //!< [0] Fault Detection Flag 0 + uint32_t FAULTF1 : 1; //!< [1] Fault Detection Flag 1 + uint32_t FAULTF2 : 1; //!< [2] Fault Detection Flag 2 + uint32_t FAULTF3 : 1; //!< [3] Fault Detection Flag 3 + uint32_t RESERVED0 : 1; //!< [4] + uint32_t FAULTIN : 1; //!< [5] Fault Inputs + uint32_t WPEN : 1; //!< [6] Write Protection Enable + uint32_t FAULTF : 1; //!< [7] Fault Detection Flag + uint32_t RESERVED1 : 24; //!< [31:8] + } B; +} hw_ftm_fms_t; +#endif + +/*! + * @name Constants and macros for entire FTM_FMS register + */ +//@{ +#define HW_FTM_FMS_ADDR(x) (REGS_FTM_BASE(x) + 0x74U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_FMS(x) (*(__IO hw_ftm_fms_t *) HW_FTM_FMS_ADDR(x)) +#define HW_FTM_FMS_RD(x) (HW_FTM_FMS(x).U) +#define HW_FTM_FMS_WR(x, v) (HW_FTM_FMS(x).U = (v)) +#define HW_FTM_FMS_SET(x, v) (HW_FTM_FMS_WR(x, HW_FTM_FMS_RD(x) | (v))) +#define HW_FTM_FMS_CLR(x, v) (HW_FTM_FMS_WR(x, HW_FTM_FMS_RD(x) & ~(v))) +#define HW_FTM_FMS_TOG(x, v) (HW_FTM_FMS_WR(x, HW_FTM_FMS_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_FMS bitfields + */ + +/*! + * @name Register FTM_FMS, field FAULTF0[0] (ROWZ) + * + * Set by hardware when fault control is enabled, the corresponding fault input + * is enabled and a fault condition is detected at the fault input. Clear FAULTF0 + * by reading the FMS register while FAULTF0 is set and then writing a 0 to + * FAULTF0 while there is no existing fault condition at the corresponding fault + * input. Writing a 1 to FAULTF0 has no effect. FAULTF0 bit is also cleared when + * FAULTF bit is cleared. If another fault condition is detected at the corresponding + * fault input before the clearing sequence is completed, the sequence is reset + * so FAULTF0 remains set after the clearing sequence is completed for the + * earlier fault condition. + * + * Values: + * - 0 - No fault condition was detected at the fault input. + * - 1 - A fault condition was detected at the fault input. + */ +//@{ +#define BP_FTM_FMS_FAULTF0 (0U) //!< Bit position for FTM_FMS_FAULTF0. +#define BM_FTM_FMS_FAULTF0 (0x00000001U) //!< Bit mask for FTM_FMS_FAULTF0. +#define BS_FTM_FMS_FAULTF0 (1U) //!< Bit field size in bits for FTM_FMS_FAULTF0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FMS_FAULTF0 field. +#define BR_FTM_FMS_FAULTF0(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF0)) +#endif +//@} + +/*! + * @name Register FTM_FMS, field FAULTF1[1] (ROWZ) + * + * Set by hardware when fault control is enabled, the corresponding fault input + * is enabled and a fault condition is detected at the fault input. Clear FAULTF1 + * by reading the FMS register while FAULTF1 is set and then writing a 0 to + * FAULTF1 while there is no existing fault condition at the corresponding fault + * input. Writing a 1 to FAULTF1 has no effect. FAULTF1 bit is also cleared when + * FAULTF bit is cleared. If another fault condition is detected at the corresponding + * fault input before the clearing sequence is completed, the sequence is reset + * so FAULTF1 remains set after the clearing sequence is completed for the + * earlier fault condition. + * + * Values: + * - 0 - No fault condition was detected at the fault input. + * - 1 - A fault condition was detected at the fault input. + */ +//@{ +#define BP_FTM_FMS_FAULTF1 (1U) //!< Bit position for FTM_FMS_FAULTF1. +#define BM_FTM_FMS_FAULTF1 (0x00000002U) //!< Bit mask for FTM_FMS_FAULTF1. +#define BS_FTM_FMS_FAULTF1 (1U) //!< Bit field size in bits for FTM_FMS_FAULTF1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FMS_FAULTF1 field. +#define BR_FTM_FMS_FAULTF1(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF1)) +#endif +//@} + +/*! + * @name Register FTM_FMS, field FAULTF2[2] (ROWZ) + * + * Set by hardware when fault control is enabled, the corresponding fault input + * is enabled and a fault condition is detected at the fault input. Clear FAULTF2 + * by reading the FMS register while FAULTF2 is set and then writing a 0 to + * FAULTF2 while there is no existing fault condition at the corresponding fault + * input. Writing a 1 to FAULTF2 has no effect. FAULTF2 bit is also cleared when + * FAULTF bit is cleared. If another fault condition is detected at the corresponding + * fault input before the clearing sequence is completed, the sequence is reset + * so FAULTF2 remains set after the clearing sequence is completed for the + * earlier fault condition. + * + * Values: + * - 0 - No fault condition was detected at the fault input. + * - 1 - A fault condition was detected at the fault input. + */ +//@{ +#define BP_FTM_FMS_FAULTF2 (2U) //!< Bit position for FTM_FMS_FAULTF2. +#define BM_FTM_FMS_FAULTF2 (0x00000004U) //!< Bit mask for FTM_FMS_FAULTF2. +#define BS_FTM_FMS_FAULTF2 (1U) //!< Bit field size in bits for FTM_FMS_FAULTF2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FMS_FAULTF2 field. +#define BR_FTM_FMS_FAULTF2(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF2)) +#endif +//@} + +/*! + * @name Register FTM_FMS, field FAULTF3[3] (ROWZ) + * + * Set by hardware when fault control is enabled, the corresponding fault input + * is enabled and a fault condition is detected at the fault input. Clear FAULTF3 + * by reading the FMS register while FAULTF3 is set and then writing a 0 to + * FAULTF3 while there is no existing fault condition at the corresponding fault + * input. Writing a 1 to FAULTF3 has no effect. FAULTF3 bit is also cleared when + * FAULTF bit is cleared. If another fault condition is detected at the corresponding + * fault input before the clearing sequence is completed, the sequence is reset + * so FAULTF3 remains set after the clearing sequence is completed for the + * earlier fault condition. + * + * Values: + * - 0 - No fault condition was detected at the fault input. + * - 1 - A fault condition was detected at the fault input. + */ +//@{ +#define BP_FTM_FMS_FAULTF3 (3U) //!< Bit position for FTM_FMS_FAULTF3. +#define BM_FTM_FMS_FAULTF3 (0x00000008U) //!< Bit mask for FTM_FMS_FAULTF3. +#define BS_FTM_FMS_FAULTF3 (1U) //!< Bit field size in bits for FTM_FMS_FAULTF3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FMS_FAULTF3 field. +#define BR_FTM_FMS_FAULTF3(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF3)) +#endif +//@} + +/*! + * @name Register FTM_FMS, field FAULTIN[5] (RO) + * + * Represents the logic OR of the enabled fault inputs after their filter (if + * their filter is enabled) when fault control is enabled. + * + * Values: + * - 0 - The logic OR of the enabled fault inputs is 0. + * - 1 - The logic OR of the enabled fault inputs is 1. + */ +//@{ +#define BP_FTM_FMS_FAULTIN (5U) //!< Bit position for FTM_FMS_FAULTIN. +#define BM_FTM_FMS_FAULTIN (0x00000020U) //!< Bit mask for FTM_FMS_FAULTIN. +#define BS_FTM_FMS_FAULTIN (1U) //!< Bit field size in bits for FTM_FMS_FAULTIN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FMS_FAULTIN field. +#define BR_FTM_FMS_FAULTIN(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTIN)) +#endif +//@} + +/*! + * @name Register FTM_FMS, field WPEN[6] (RW) + * + * The WPEN bit is the negation of the WPDIS bit. WPEN is set when 1 is written + * to it. WPEN is cleared when WPEN bit is read as a 1 and then 1 is written to + * WPDIS. Writing 0 to WPEN has no effect. + * + * Values: + * - 0 - Write protection is disabled. Write protected bits can be written. + * - 1 - Write protection is enabled. Write protected bits cannot be written. + */ +//@{ +#define BP_FTM_FMS_WPEN (6U) //!< Bit position for FTM_FMS_WPEN. +#define BM_FTM_FMS_WPEN (0x00000040U) //!< Bit mask for FTM_FMS_WPEN. +#define BS_FTM_FMS_WPEN (1U) //!< Bit field size in bits for FTM_FMS_WPEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FMS_WPEN field. +#define BR_FTM_FMS_WPEN(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_WPEN)) +#endif + +//! @brief Format value for bitfield FTM_FMS_WPEN. +#define BF_FTM_FMS_WPEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FMS_WPEN), uint32_t) & BM_FTM_FMS_WPEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WPEN field to a new value. +#define BW_FTM_FMS_WPEN(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_WPEN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FMS, field FAULTF[7] (ROWZ) + * + * Represents the logic OR of the individual FAULTFj bits where j = 3, 2, 1, 0. + * Clear FAULTF by reading the FMS register while FAULTF is set and then writing + * a 0 to FAULTF while there is no existing fault condition at the enabled fault + * inputs. Writing a 1 to FAULTF has no effect. If another fault condition is + * detected in an enabled fault input before the clearing sequence is completed, the + * sequence is reset so FAULTF remains set after the clearing sequence is + * completed for the earlier fault condition. FAULTF is also cleared when FAULTFj bits + * are cleared individually. + * + * Values: + * - 0 - No fault condition was detected. + * - 1 - A fault condition was detected. + */ +//@{ +#define BP_FTM_FMS_FAULTF (7U) //!< Bit position for FTM_FMS_FAULTF. +#define BM_FTM_FMS_FAULTF (0x00000080U) //!< Bit mask for FTM_FMS_FAULTF. +#define BS_FTM_FMS_FAULTF (1U) //!< Bit field size in bits for FTM_FMS_FAULTF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FMS_FAULTF field. +#define BR_FTM_FMS_FAULTF(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_FILTER - Input Capture Filter Control +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_FILTER - Input Capture Filter Control (RW) + * + * Reset value: 0x00000000U + * + * This register selects the filter value for the inputs of channels. Channels + * 4, 5, 6 and 7 do not have an input filter. Writing to the FILTER register has + * immediate effect and must be done only when the channels 0, 1, 2, and 3 are not + * in input modes. Failure to do this could result in a missing valid signal. + */ +typedef union _hw_ftm_filter +{ + uint32_t U; + struct _hw_ftm_filter_bitfields + { + uint32_t CH0FVAL : 4; //!< [3:0] Channel 0 Input Filter + uint32_t CH1FVAL : 4; //!< [7:4] Channel 1 Input Filter + uint32_t CH2FVAL : 4; //!< [11:8] Channel 2 Input Filter + uint32_t CH3FVAL : 4; //!< [15:12] Channel 3 Input Filter + uint32_t RESERVED0 : 16; //!< [31:16] + } B; +} hw_ftm_filter_t; +#endif + +/*! + * @name Constants and macros for entire FTM_FILTER register + */ +//@{ +#define HW_FTM_FILTER_ADDR(x) (REGS_FTM_BASE(x) + 0x78U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_FILTER(x) (*(__IO hw_ftm_filter_t *) HW_FTM_FILTER_ADDR(x)) +#define HW_FTM_FILTER_RD(x) (HW_FTM_FILTER(x).U) +#define HW_FTM_FILTER_WR(x, v) (HW_FTM_FILTER(x).U = (v)) +#define HW_FTM_FILTER_SET(x, v) (HW_FTM_FILTER_WR(x, HW_FTM_FILTER_RD(x) | (v))) +#define HW_FTM_FILTER_CLR(x, v) (HW_FTM_FILTER_WR(x, HW_FTM_FILTER_RD(x) & ~(v))) +#define HW_FTM_FILTER_TOG(x, v) (HW_FTM_FILTER_WR(x, HW_FTM_FILTER_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_FILTER bitfields + */ + +/*! + * @name Register FTM_FILTER, field CH0FVAL[3:0] (RW) + * + * Selects the filter value for the channel input. The filter is disabled when + * the value is zero. + */ +//@{ +#define BP_FTM_FILTER_CH0FVAL (0U) //!< Bit position for FTM_FILTER_CH0FVAL. +#define BM_FTM_FILTER_CH0FVAL (0x0000000FU) //!< Bit mask for FTM_FILTER_CH0FVAL. +#define BS_FTM_FILTER_CH0FVAL (4U) //!< Bit field size in bits for FTM_FILTER_CH0FVAL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FILTER_CH0FVAL field. +#define BR_FTM_FILTER_CH0FVAL(x) (HW_FTM_FILTER(x).B.CH0FVAL) +#endif + +//! @brief Format value for bitfield FTM_FILTER_CH0FVAL. +#define BF_FTM_FILTER_CH0FVAL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FILTER_CH0FVAL), uint32_t) & BM_FTM_FILTER_CH0FVAL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH0FVAL field to a new value. +#define BW_FTM_FILTER_CH0FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH0FVAL) | BF_FTM_FILTER_CH0FVAL(v))) +#endif +//@} + +/*! + * @name Register FTM_FILTER, field CH1FVAL[7:4] (RW) + * + * Selects the filter value for the channel input. The filter is disabled when + * the value is zero. + */ +//@{ +#define BP_FTM_FILTER_CH1FVAL (4U) //!< Bit position for FTM_FILTER_CH1FVAL. +#define BM_FTM_FILTER_CH1FVAL (0x000000F0U) //!< Bit mask for FTM_FILTER_CH1FVAL. +#define BS_FTM_FILTER_CH1FVAL (4U) //!< Bit field size in bits for FTM_FILTER_CH1FVAL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FILTER_CH1FVAL field. +#define BR_FTM_FILTER_CH1FVAL(x) (HW_FTM_FILTER(x).B.CH1FVAL) +#endif + +//! @brief Format value for bitfield FTM_FILTER_CH1FVAL. +#define BF_FTM_FILTER_CH1FVAL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FILTER_CH1FVAL), uint32_t) & BM_FTM_FILTER_CH1FVAL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH1FVAL field to a new value. +#define BW_FTM_FILTER_CH1FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH1FVAL) | BF_FTM_FILTER_CH1FVAL(v))) +#endif +//@} + +/*! + * @name Register FTM_FILTER, field CH2FVAL[11:8] (RW) + * + * Selects the filter value for the channel input. The filter is disabled when + * the value is zero. + */ +//@{ +#define BP_FTM_FILTER_CH2FVAL (8U) //!< Bit position for FTM_FILTER_CH2FVAL. +#define BM_FTM_FILTER_CH2FVAL (0x00000F00U) //!< Bit mask for FTM_FILTER_CH2FVAL. +#define BS_FTM_FILTER_CH2FVAL (4U) //!< Bit field size in bits for FTM_FILTER_CH2FVAL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FILTER_CH2FVAL field. +#define BR_FTM_FILTER_CH2FVAL(x) (HW_FTM_FILTER(x).B.CH2FVAL) +#endif + +//! @brief Format value for bitfield FTM_FILTER_CH2FVAL. +#define BF_FTM_FILTER_CH2FVAL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FILTER_CH2FVAL), uint32_t) & BM_FTM_FILTER_CH2FVAL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH2FVAL field to a new value. +#define BW_FTM_FILTER_CH2FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH2FVAL) | BF_FTM_FILTER_CH2FVAL(v))) +#endif +//@} + +/*! + * @name Register FTM_FILTER, field CH3FVAL[15:12] (RW) + * + * Selects the filter value for the channel input. The filter is disabled when + * the value is zero. + */ +//@{ +#define BP_FTM_FILTER_CH3FVAL (12U) //!< Bit position for FTM_FILTER_CH3FVAL. +#define BM_FTM_FILTER_CH3FVAL (0x0000F000U) //!< Bit mask for FTM_FILTER_CH3FVAL. +#define BS_FTM_FILTER_CH3FVAL (4U) //!< Bit field size in bits for FTM_FILTER_CH3FVAL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FILTER_CH3FVAL field. +#define BR_FTM_FILTER_CH3FVAL(x) (HW_FTM_FILTER(x).B.CH3FVAL) +#endif + +//! @brief Format value for bitfield FTM_FILTER_CH3FVAL. +#define BF_FTM_FILTER_CH3FVAL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FILTER_CH3FVAL), uint32_t) & BM_FTM_FILTER_CH3FVAL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH3FVAL field to a new value. +#define BW_FTM_FILTER_CH3FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH3FVAL) | BF_FTM_FILTER_CH3FVAL(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_FLTCTRL - Fault Control +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_FLTCTRL - Fault Control (RW) + * + * Reset value: 0x00000000U + * + * This register selects the filter value for the fault inputs, enables the + * fault inputs and the fault inputs filter. + */ +typedef union _hw_ftm_fltctrl +{ + uint32_t U; + struct _hw_ftm_fltctrl_bitfields + { + uint32_t FAULT0EN : 1; //!< [0] Fault Input 0 Enable + uint32_t FAULT1EN : 1; //!< [1] Fault Input 1 Enable + uint32_t FAULT2EN : 1; //!< [2] Fault Input 2 Enable + uint32_t FAULT3EN : 1; //!< [3] Fault Input 3 Enable + uint32_t FFLTR0EN : 1; //!< [4] Fault Input 0 Filter Enable + uint32_t FFLTR1EN : 1; //!< [5] Fault Input 1 Filter Enable + uint32_t FFLTR2EN : 1; //!< [6] Fault Input 2 Filter Enable + uint32_t FFLTR3EN : 1; //!< [7] Fault Input 3 Filter Enable + uint32_t FFVAL : 4; //!< [11:8] Fault Input Filter + uint32_t RESERVED0 : 20; //!< [31:12] + } B; +} hw_ftm_fltctrl_t; +#endif + +/*! + * @name Constants and macros for entire FTM_FLTCTRL register + */ +//@{ +#define HW_FTM_FLTCTRL_ADDR(x) (REGS_FTM_BASE(x) + 0x7CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_FLTCTRL(x) (*(__IO hw_ftm_fltctrl_t *) HW_FTM_FLTCTRL_ADDR(x)) +#define HW_FTM_FLTCTRL_RD(x) (HW_FTM_FLTCTRL(x).U) +#define HW_FTM_FLTCTRL_WR(x, v) (HW_FTM_FLTCTRL(x).U = (v)) +#define HW_FTM_FLTCTRL_SET(x, v) (HW_FTM_FLTCTRL_WR(x, HW_FTM_FLTCTRL_RD(x) | (v))) +#define HW_FTM_FLTCTRL_CLR(x, v) (HW_FTM_FLTCTRL_WR(x, HW_FTM_FLTCTRL_RD(x) & ~(v))) +#define HW_FTM_FLTCTRL_TOG(x, v) (HW_FTM_FLTCTRL_WR(x, HW_FTM_FLTCTRL_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_FLTCTRL bitfields + */ + +/*! + * @name Register FTM_FLTCTRL, field FAULT0EN[0] (RW) + * + * Enables the fault input. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input is disabled. + * - 1 - Fault input is enabled. + */ +//@{ +#define BP_FTM_FLTCTRL_FAULT0EN (0U) //!< Bit position for FTM_FLTCTRL_FAULT0EN. +#define BM_FTM_FLTCTRL_FAULT0EN (0x00000001U) //!< Bit mask for FTM_FLTCTRL_FAULT0EN. +#define BS_FTM_FLTCTRL_FAULT0EN (1U) //!< Bit field size in bits for FTM_FLTCTRL_FAULT0EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTCTRL_FAULT0EN field. +#define BR_FTM_FLTCTRL_FAULT0EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT0EN)) +#endif + +//! @brief Format value for bitfield FTM_FLTCTRL_FAULT0EN. +#define BF_FTM_FLTCTRL_FAULT0EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTCTRL_FAULT0EN), uint32_t) & BM_FTM_FLTCTRL_FAULT0EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULT0EN field to a new value. +#define BW_FTM_FLTCTRL_FAULT0EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT0EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTCTRL, field FAULT1EN[1] (RW) + * + * Enables the fault input. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input is disabled. + * - 1 - Fault input is enabled. + */ +//@{ +#define BP_FTM_FLTCTRL_FAULT1EN (1U) //!< Bit position for FTM_FLTCTRL_FAULT1EN. +#define BM_FTM_FLTCTRL_FAULT1EN (0x00000002U) //!< Bit mask for FTM_FLTCTRL_FAULT1EN. +#define BS_FTM_FLTCTRL_FAULT1EN (1U) //!< Bit field size in bits for FTM_FLTCTRL_FAULT1EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTCTRL_FAULT1EN field. +#define BR_FTM_FLTCTRL_FAULT1EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT1EN)) +#endif + +//! @brief Format value for bitfield FTM_FLTCTRL_FAULT1EN. +#define BF_FTM_FLTCTRL_FAULT1EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTCTRL_FAULT1EN), uint32_t) & BM_FTM_FLTCTRL_FAULT1EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULT1EN field to a new value. +#define BW_FTM_FLTCTRL_FAULT1EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT1EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTCTRL, field FAULT2EN[2] (RW) + * + * Enables the fault input. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input is disabled. + * - 1 - Fault input is enabled. + */ +//@{ +#define BP_FTM_FLTCTRL_FAULT2EN (2U) //!< Bit position for FTM_FLTCTRL_FAULT2EN. +#define BM_FTM_FLTCTRL_FAULT2EN (0x00000004U) //!< Bit mask for FTM_FLTCTRL_FAULT2EN. +#define BS_FTM_FLTCTRL_FAULT2EN (1U) //!< Bit field size in bits for FTM_FLTCTRL_FAULT2EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTCTRL_FAULT2EN field. +#define BR_FTM_FLTCTRL_FAULT2EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT2EN)) +#endif + +//! @brief Format value for bitfield FTM_FLTCTRL_FAULT2EN. +#define BF_FTM_FLTCTRL_FAULT2EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTCTRL_FAULT2EN), uint32_t) & BM_FTM_FLTCTRL_FAULT2EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULT2EN field to a new value. +#define BW_FTM_FLTCTRL_FAULT2EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT2EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTCTRL, field FAULT3EN[3] (RW) + * + * Enables the fault input. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input is disabled. + * - 1 - Fault input is enabled. + */ +//@{ +#define BP_FTM_FLTCTRL_FAULT3EN (3U) //!< Bit position for FTM_FLTCTRL_FAULT3EN. +#define BM_FTM_FLTCTRL_FAULT3EN (0x00000008U) //!< Bit mask for FTM_FLTCTRL_FAULT3EN. +#define BS_FTM_FLTCTRL_FAULT3EN (1U) //!< Bit field size in bits for FTM_FLTCTRL_FAULT3EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTCTRL_FAULT3EN field. +#define BR_FTM_FLTCTRL_FAULT3EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT3EN)) +#endif + +//! @brief Format value for bitfield FTM_FLTCTRL_FAULT3EN. +#define BF_FTM_FLTCTRL_FAULT3EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTCTRL_FAULT3EN), uint32_t) & BM_FTM_FLTCTRL_FAULT3EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FAULT3EN field to a new value. +#define BW_FTM_FLTCTRL_FAULT3EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT3EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTCTRL, field FFLTR0EN[4] (RW) + * + * Enables the filter for the fault input. This field is write protected. It can + * be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input filter is disabled. + * - 1 - Fault input filter is enabled. + */ +//@{ +#define BP_FTM_FLTCTRL_FFLTR0EN (4U) //!< Bit position for FTM_FLTCTRL_FFLTR0EN. +#define BM_FTM_FLTCTRL_FFLTR0EN (0x00000010U) //!< Bit mask for FTM_FLTCTRL_FFLTR0EN. +#define BS_FTM_FLTCTRL_FFLTR0EN (1U) //!< Bit field size in bits for FTM_FLTCTRL_FFLTR0EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTCTRL_FFLTR0EN field. +#define BR_FTM_FLTCTRL_FFLTR0EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR0EN)) +#endif + +//! @brief Format value for bitfield FTM_FLTCTRL_FFLTR0EN. +#define BF_FTM_FLTCTRL_FFLTR0EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTCTRL_FFLTR0EN), uint32_t) & BM_FTM_FLTCTRL_FFLTR0EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FFLTR0EN field to a new value. +#define BW_FTM_FLTCTRL_FFLTR0EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR0EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTCTRL, field FFLTR1EN[5] (RW) + * + * Enables the filter for the fault input. This field is write protected. It can + * be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input filter is disabled. + * - 1 - Fault input filter is enabled. + */ +//@{ +#define BP_FTM_FLTCTRL_FFLTR1EN (5U) //!< Bit position for FTM_FLTCTRL_FFLTR1EN. +#define BM_FTM_FLTCTRL_FFLTR1EN (0x00000020U) //!< Bit mask for FTM_FLTCTRL_FFLTR1EN. +#define BS_FTM_FLTCTRL_FFLTR1EN (1U) //!< Bit field size in bits for FTM_FLTCTRL_FFLTR1EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTCTRL_FFLTR1EN field. +#define BR_FTM_FLTCTRL_FFLTR1EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR1EN)) +#endif + +//! @brief Format value for bitfield FTM_FLTCTRL_FFLTR1EN. +#define BF_FTM_FLTCTRL_FFLTR1EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTCTRL_FFLTR1EN), uint32_t) & BM_FTM_FLTCTRL_FFLTR1EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FFLTR1EN field to a new value. +#define BW_FTM_FLTCTRL_FFLTR1EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR1EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTCTRL, field FFLTR2EN[6] (RW) + * + * Enables the filter for the fault input. This field is write protected. It can + * be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input filter is disabled. + * - 1 - Fault input filter is enabled. + */ +//@{ +#define BP_FTM_FLTCTRL_FFLTR2EN (6U) //!< Bit position for FTM_FLTCTRL_FFLTR2EN. +#define BM_FTM_FLTCTRL_FFLTR2EN (0x00000040U) //!< Bit mask for FTM_FLTCTRL_FFLTR2EN. +#define BS_FTM_FLTCTRL_FFLTR2EN (1U) //!< Bit field size in bits for FTM_FLTCTRL_FFLTR2EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTCTRL_FFLTR2EN field. +#define BR_FTM_FLTCTRL_FFLTR2EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR2EN)) +#endif + +//! @brief Format value for bitfield FTM_FLTCTRL_FFLTR2EN. +#define BF_FTM_FLTCTRL_FFLTR2EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTCTRL_FFLTR2EN), uint32_t) & BM_FTM_FLTCTRL_FFLTR2EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FFLTR2EN field to a new value. +#define BW_FTM_FLTCTRL_FFLTR2EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR2EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTCTRL, field FFLTR3EN[7] (RW) + * + * Enables the filter for the fault input. This field is write protected. It can + * be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input filter is disabled. + * - 1 - Fault input filter is enabled. + */ +//@{ +#define BP_FTM_FLTCTRL_FFLTR3EN (7U) //!< Bit position for FTM_FLTCTRL_FFLTR3EN. +#define BM_FTM_FLTCTRL_FFLTR3EN (0x00000080U) //!< Bit mask for FTM_FLTCTRL_FFLTR3EN. +#define BS_FTM_FLTCTRL_FFLTR3EN (1U) //!< Bit field size in bits for FTM_FLTCTRL_FFLTR3EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTCTRL_FFLTR3EN field. +#define BR_FTM_FLTCTRL_FFLTR3EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR3EN)) +#endif + +//! @brief Format value for bitfield FTM_FLTCTRL_FFLTR3EN. +#define BF_FTM_FLTCTRL_FFLTR3EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTCTRL_FFLTR3EN), uint32_t) & BM_FTM_FLTCTRL_FFLTR3EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FFLTR3EN field to a new value. +#define BW_FTM_FLTCTRL_FFLTR3EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR3EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTCTRL, field FFVAL[11:8] (RW) + * + * Selects the filter value for the fault inputs. The fault filter is disabled + * when the value is zero. Writing to this field has immediate effect and must be + * done only when the fault control or all fault inputs are disabled. Failure to + * do this could result in a missing fault detection. + */ +//@{ +#define BP_FTM_FLTCTRL_FFVAL (8U) //!< Bit position for FTM_FLTCTRL_FFVAL. +#define BM_FTM_FLTCTRL_FFVAL (0x00000F00U) //!< Bit mask for FTM_FLTCTRL_FFVAL. +#define BS_FTM_FLTCTRL_FFVAL (4U) //!< Bit field size in bits for FTM_FLTCTRL_FFVAL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTCTRL_FFVAL field. +#define BR_FTM_FLTCTRL_FFVAL(x) (HW_FTM_FLTCTRL(x).B.FFVAL) +#endif + +//! @brief Format value for bitfield FTM_FLTCTRL_FFVAL. +#define BF_FTM_FLTCTRL_FFVAL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTCTRL_FFVAL), uint32_t) & BM_FTM_FLTCTRL_FFVAL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FFVAL field to a new value. +#define BW_FTM_FLTCTRL_FFVAL(x, v) (HW_FTM_FLTCTRL_WR(x, (HW_FTM_FLTCTRL_RD(x) & ~BM_FTM_FLTCTRL_FFVAL) | BF_FTM_FLTCTRL_FFVAL(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_QDCTRL - Quadrature Decoder Control And Status +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_QDCTRL - Quadrature Decoder Control And Status (RW) + * + * Reset value: 0x00000000U + * + * This register has the control and status bits for the Quadrature Decoder mode. + */ +typedef union _hw_ftm_qdctrl +{ + uint32_t U; + struct _hw_ftm_qdctrl_bitfields + { + uint32_t QUADEN : 1; //!< [0] Quadrature Decoder Mode Enable + uint32_t TOFDIR : 1; //!< [1] Timer Overflow Direction In Quadrature + //! Decoder Mode + uint32_t QUADIR : 1; //!< [2] FTM Counter Direction In Quadrature + //! Decoder Mode + uint32_t QUADMODE : 1; //!< [3] Quadrature Decoder Mode + uint32_t PHBPOL : 1; //!< [4] Phase B Input Polarity + uint32_t PHAPOL : 1; //!< [5] Phase A Input Polarity + uint32_t PHBFLTREN : 1; //!< [6] Phase B Input Filter Enable + uint32_t PHAFLTREN : 1; //!< [7] Phase A Input Filter Enable + uint32_t RESERVED0 : 24; //!< [31:8] + } B; +} hw_ftm_qdctrl_t; +#endif + +/*! + * @name Constants and macros for entire FTM_QDCTRL register + */ +//@{ +#define HW_FTM_QDCTRL_ADDR(x) (REGS_FTM_BASE(x) + 0x80U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_QDCTRL(x) (*(__IO hw_ftm_qdctrl_t *) HW_FTM_QDCTRL_ADDR(x)) +#define HW_FTM_QDCTRL_RD(x) (HW_FTM_QDCTRL(x).U) +#define HW_FTM_QDCTRL_WR(x, v) (HW_FTM_QDCTRL(x).U = (v)) +#define HW_FTM_QDCTRL_SET(x, v) (HW_FTM_QDCTRL_WR(x, HW_FTM_QDCTRL_RD(x) | (v))) +#define HW_FTM_QDCTRL_CLR(x, v) (HW_FTM_QDCTRL_WR(x, HW_FTM_QDCTRL_RD(x) & ~(v))) +#define HW_FTM_QDCTRL_TOG(x, v) (HW_FTM_QDCTRL_WR(x, HW_FTM_QDCTRL_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_QDCTRL bitfields + */ + +/*! + * @name Register FTM_QDCTRL, field QUADEN[0] (RW) + * + * Enables the Quadrature Decoder mode. In this mode, the phase A and B input + * signals control the FTM counter direction. The Quadrature Decoder mode has + * precedence over the other modes. See #ModeSel1Table. This field is write protected. + * It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Quadrature Decoder mode is disabled. + * - 1 - Quadrature Decoder mode is enabled. + */ +//@{ +#define BP_FTM_QDCTRL_QUADEN (0U) //!< Bit position for FTM_QDCTRL_QUADEN. +#define BM_FTM_QDCTRL_QUADEN (0x00000001U) //!< Bit mask for FTM_QDCTRL_QUADEN. +#define BS_FTM_QDCTRL_QUADEN (1U) //!< Bit field size in bits for FTM_QDCTRL_QUADEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_QDCTRL_QUADEN field. +#define BR_FTM_QDCTRL_QUADEN(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADEN)) +#endif + +//! @brief Format value for bitfield FTM_QDCTRL_QUADEN. +#define BF_FTM_QDCTRL_QUADEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_QDCTRL_QUADEN), uint32_t) & BM_FTM_QDCTRL_QUADEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the QUADEN field to a new value. +#define BW_FTM_QDCTRL_QUADEN(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADEN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_QDCTRL, field TOFDIR[1] (RO) + * + * Indicates if the TOF bit was set on the top or the bottom of counting. + * + * Values: + * - 0 - TOF bit was set on the bottom of counting. There was an FTM counter + * decrement and FTM counter changes from its minimum value (CNTIN register) to + * its maximum value (MOD register). + * - 1 - TOF bit was set on the top of counting. There was an FTM counter + * increment and FTM counter changes from its maximum value (MOD register) to its + * minimum value (CNTIN register). + */ +//@{ +#define BP_FTM_QDCTRL_TOFDIR (1U) //!< Bit position for FTM_QDCTRL_TOFDIR. +#define BM_FTM_QDCTRL_TOFDIR (0x00000002U) //!< Bit mask for FTM_QDCTRL_TOFDIR. +#define BS_FTM_QDCTRL_TOFDIR (1U) //!< Bit field size in bits for FTM_QDCTRL_TOFDIR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_QDCTRL_TOFDIR field. +#define BR_FTM_QDCTRL_TOFDIR(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_TOFDIR)) +#endif +//@} + +/*! + * @name Register FTM_QDCTRL, field QUADIR[2] (RO) + * + * Indicates the counting direction. + * + * Values: + * - 0 - Counting direction is decreasing (FTM counter decrement). + * - 1 - Counting direction is increasing (FTM counter increment). + */ +//@{ +#define BP_FTM_QDCTRL_QUADIR (2U) //!< Bit position for FTM_QDCTRL_QUADIR. +#define BM_FTM_QDCTRL_QUADIR (0x00000004U) //!< Bit mask for FTM_QDCTRL_QUADIR. +#define BS_FTM_QDCTRL_QUADIR (1U) //!< Bit field size in bits for FTM_QDCTRL_QUADIR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_QDCTRL_QUADIR field. +#define BR_FTM_QDCTRL_QUADIR(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADIR)) +#endif +//@} + +/*! + * @name Register FTM_QDCTRL, field QUADMODE[3] (RW) + * + * Selects the encoding mode used in the Quadrature Decoder mode. + * + * Values: + * - 0 - Phase A and phase B encoding mode. + * - 1 - Count and direction encoding mode. + */ +//@{ +#define BP_FTM_QDCTRL_QUADMODE (3U) //!< Bit position for FTM_QDCTRL_QUADMODE. +#define BM_FTM_QDCTRL_QUADMODE (0x00000008U) //!< Bit mask for FTM_QDCTRL_QUADMODE. +#define BS_FTM_QDCTRL_QUADMODE (1U) //!< Bit field size in bits for FTM_QDCTRL_QUADMODE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_QDCTRL_QUADMODE field. +#define BR_FTM_QDCTRL_QUADMODE(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADMODE)) +#endif + +//! @brief Format value for bitfield FTM_QDCTRL_QUADMODE. +#define BF_FTM_QDCTRL_QUADMODE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_QDCTRL_QUADMODE), uint32_t) & BM_FTM_QDCTRL_QUADMODE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the QUADMODE field to a new value. +#define BW_FTM_QDCTRL_QUADMODE(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADMODE) = (v)) +#endif +//@} + +/*! + * @name Register FTM_QDCTRL, field PHBPOL[4] (RW) + * + * Selects the polarity for the quadrature decoder phase B input. + * + * Values: + * - 0 - Normal polarity. Phase B input signal is not inverted before + * identifying the rising and falling edges of this signal. + * - 1 - Inverted polarity. Phase B input signal is inverted before identifying + * the rising and falling edges of this signal. + */ +//@{ +#define BP_FTM_QDCTRL_PHBPOL (4U) //!< Bit position for FTM_QDCTRL_PHBPOL. +#define BM_FTM_QDCTRL_PHBPOL (0x00000010U) //!< Bit mask for FTM_QDCTRL_PHBPOL. +#define BS_FTM_QDCTRL_PHBPOL (1U) //!< Bit field size in bits for FTM_QDCTRL_PHBPOL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_QDCTRL_PHBPOL field. +#define BR_FTM_QDCTRL_PHBPOL(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBPOL)) +#endif + +//! @brief Format value for bitfield FTM_QDCTRL_PHBPOL. +#define BF_FTM_QDCTRL_PHBPOL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_QDCTRL_PHBPOL), uint32_t) & BM_FTM_QDCTRL_PHBPOL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PHBPOL field to a new value. +#define BW_FTM_QDCTRL_PHBPOL(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBPOL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_QDCTRL, field PHAPOL[5] (RW) + * + * Selects the polarity for the quadrature decoder phase A input. + * + * Values: + * - 0 - Normal polarity. Phase A input signal is not inverted before + * identifying the rising and falling edges of this signal. + * - 1 - Inverted polarity. Phase A input signal is inverted before identifying + * the rising and falling edges of this signal. + */ +//@{ +#define BP_FTM_QDCTRL_PHAPOL (5U) //!< Bit position for FTM_QDCTRL_PHAPOL. +#define BM_FTM_QDCTRL_PHAPOL (0x00000020U) //!< Bit mask for FTM_QDCTRL_PHAPOL. +#define BS_FTM_QDCTRL_PHAPOL (1U) //!< Bit field size in bits for FTM_QDCTRL_PHAPOL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_QDCTRL_PHAPOL field. +#define BR_FTM_QDCTRL_PHAPOL(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAPOL)) +#endif + +//! @brief Format value for bitfield FTM_QDCTRL_PHAPOL. +#define BF_FTM_QDCTRL_PHAPOL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_QDCTRL_PHAPOL), uint32_t) & BM_FTM_QDCTRL_PHAPOL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PHAPOL field to a new value. +#define BW_FTM_QDCTRL_PHAPOL(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAPOL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_QDCTRL, field PHBFLTREN[6] (RW) + * + * Enables the filter for the quadrature decoder phase B input. The filter value + * for the phase B input is defined by the CH1FVAL field of FILTER. The phase B + * filter is also disabled when CH1FVAL is zero. + * + * Values: + * - 0 - Phase B input filter is disabled. + * - 1 - Phase B input filter is enabled. + */ +//@{ +#define BP_FTM_QDCTRL_PHBFLTREN (6U) //!< Bit position for FTM_QDCTRL_PHBFLTREN. +#define BM_FTM_QDCTRL_PHBFLTREN (0x00000040U) //!< Bit mask for FTM_QDCTRL_PHBFLTREN. +#define BS_FTM_QDCTRL_PHBFLTREN (1U) //!< Bit field size in bits for FTM_QDCTRL_PHBFLTREN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_QDCTRL_PHBFLTREN field. +#define BR_FTM_QDCTRL_PHBFLTREN(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBFLTREN)) +#endif + +//! @brief Format value for bitfield FTM_QDCTRL_PHBFLTREN. +#define BF_FTM_QDCTRL_PHBFLTREN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_QDCTRL_PHBFLTREN), uint32_t) & BM_FTM_QDCTRL_PHBFLTREN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PHBFLTREN field to a new value. +#define BW_FTM_QDCTRL_PHBFLTREN(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBFLTREN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_QDCTRL, field PHAFLTREN[7] (RW) + * + * Enables the filter for the quadrature decoder phase A input. The filter value + * for the phase A input is defined by the CH0FVAL field of FILTER. The phase A + * filter is also disabled when CH0FVAL is zero. + * + * Values: + * - 0 - Phase A input filter is disabled. + * - 1 - Phase A input filter is enabled. + */ +//@{ +#define BP_FTM_QDCTRL_PHAFLTREN (7U) //!< Bit position for FTM_QDCTRL_PHAFLTREN. +#define BM_FTM_QDCTRL_PHAFLTREN (0x00000080U) //!< Bit mask for FTM_QDCTRL_PHAFLTREN. +#define BS_FTM_QDCTRL_PHAFLTREN (1U) //!< Bit field size in bits for FTM_QDCTRL_PHAFLTREN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_QDCTRL_PHAFLTREN field. +#define BR_FTM_QDCTRL_PHAFLTREN(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAFLTREN)) +#endif + +//! @brief Format value for bitfield FTM_QDCTRL_PHAFLTREN. +#define BF_FTM_QDCTRL_PHAFLTREN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_QDCTRL_PHAFLTREN), uint32_t) & BM_FTM_QDCTRL_PHAFLTREN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PHAFLTREN field to a new value. +#define BW_FTM_QDCTRL_PHAFLTREN(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAFLTREN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_CONF - Configuration +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_CONF - Configuration (RW) + * + * Reset value: 0x00000000U + * + * This register selects the number of times that the FTM counter overflow + * should occur before the TOF bit to be set, the FTM behavior in BDM modes, the use + * of an external global time base, and the global time base signal generation. + */ +typedef union _hw_ftm_conf +{ + uint32_t U; + struct _hw_ftm_conf_bitfields + { + uint32_t NUMTOF : 5; //!< [4:0] TOF Frequency + uint32_t RESERVED0 : 1; //!< [5] + uint32_t BDMMODE : 2; //!< [7:6] BDM Mode + uint32_t RESERVED1 : 1; //!< [8] + uint32_t GTBEEN : 1; //!< [9] Global Time Base Enable + uint32_t GTBEOUT : 1; //!< [10] Global Time Base Output + uint32_t RESERVED2 : 21; //!< [31:11] + } B; +} hw_ftm_conf_t; +#endif + +/*! + * @name Constants and macros for entire FTM_CONF register + */ +//@{ +#define HW_FTM_CONF_ADDR(x) (REGS_FTM_BASE(x) + 0x84U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_CONF(x) (*(__IO hw_ftm_conf_t *) HW_FTM_CONF_ADDR(x)) +#define HW_FTM_CONF_RD(x) (HW_FTM_CONF(x).U) +#define HW_FTM_CONF_WR(x, v) (HW_FTM_CONF(x).U = (v)) +#define HW_FTM_CONF_SET(x, v) (HW_FTM_CONF_WR(x, HW_FTM_CONF_RD(x) | (v))) +#define HW_FTM_CONF_CLR(x, v) (HW_FTM_CONF_WR(x, HW_FTM_CONF_RD(x) & ~(v))) +#define HW_FTM_CONF_TOG(x, v) (HW_FTM_CONF_WR(x, HW_FTM_CONF_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_CONF bitfields + */ + +/*! + * @name Register FTM_CONF, field NUMTOF[4:0] (RW) + * + * Selects the ratio between the number of counter overflows to the number of + * times the TOF bit is set. NUMTOF = 0: The TOF bit is set for each counter + * overflow. NUMTOF = 1: The TOF bit is set for the first counter overflow but not for + * the next overflow. NUMTOF = 2: The TOF bit is set for the first counter + * overflow but not for the next 2 overflows. NUMTOF = 3: The TOF bit is set for the + * first counter overflow but not for the next 3 overflows. This pattern continues + * up to a maximum of 31. + */ +//@{ +#define BP_FTM_CONF_NUMTOF (0U) //!< Bit position for FTM_CONF_NUMTOF. +#define BM_FTM_CONF_NUMTOF (0x0000001FU) //!< Bit mask for FTM_CONF_NUMTOF. +#define BS_FTM_CONF_NUMTOF (5U) //!< Bit field size in bits for FTM_CONF_NUMTOF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CONF_NUMTOF field. +#define BR_FTM_CONF_NUMTOF(x) (HW_FTM_CONF(x).B.NUMTOF) +#endif + +//! @brief Format value for bitfield FTM_CONF_NUMTOF. +#define BF_FTM_CONF_NUMTOF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CONF_NUMTOF), uint32_t) & BM_FTM_CONF_NUMTOF) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the NUMTOF field to a new value. +#define BW_FTM_CONF_NUMTOF(x, v) (HW_FTM_CONF_WR(x, (HW_FTM_CONF_RD(x) & ~BM_FTM_CONF_NUMTOF) | BF_FTM_CONF_NUMTOF(v))) +#endif +//@} + +/*! + * @name Register FTM_CONF, field BDMMODE[7:6] (RW) + * + * Selects the FTM behavior in BDM mode. See BDM mode. + */ +//@{ +#define BP_FTM_CONF_BDMMODE (6U) //!< Bit position for FTM_CONF_BDMMODE. +#define BM_FTM_CONF_BDMMODE (0x000000C0U) //!< Bit mask for FTM_CONF_BDMMODE. +#define BS_FTM_CONF_BDMMODE (2U) //!< Bit field size in bits for FTM_CONF_BDMMODE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CONF_BDMMODE field. +#define BR_FTM_CONF_BDMMODE(x) (HW_FTM_CONF(x).B.BDMMODE) +#endif + +//! @brief Format value for bitfield FTM_CONF_BDMMODE. +#define BF_FTM_CONF_BDMMODE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CONF_BDMMODE), uint32_t) & BM_FTM_CONF_BDMMODE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BDMMODE field to a new value. +#define BW_FTM_CONF_BDMMODE(x, v) (HW_FTM_CONF_WR(x, (HW_FTM_CONF_RD(x) & ~BM_FTM_CONF_BDMMODE) | BF_FTM_CONF_BDMMODE(v))) +#endif +//@} + +/*! + * @name Register FTM_CONF, field GTBEEN[9] (RW) + * + * Configures the FTM to use an external global time base signal that is + * generated by another FTM. + * + * Values: + * - 0 - Use of an external global time base is disabled. + * - 1 - Use of an external global time base is enabled. + */ +//@{ +#define BP_FTM_CONF_GTBEEN (9U) //!< Bit position for FTM_CONF_GTBEEN. +#define BM_FTM_CONF_GTBEEN (0x00000200U) //!< Bit mask for FTM_CONF_GTBEEN. +#define BS_FTM_CONF_GTBEEN (1U) //!< Bit field size in bits for FTM_CONF_GTBEEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CONF_GTBEEN field. +#define BR_FTM_CONF_GTBEEN(x) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEEN)) +#endif + +//! @brief Format value for bitfield FTM_CONF_GTBEEN. +#define BF_FTM_CONF_GTBEEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CONF_GTBEEN), uint32_t) & BM_FTM_CONF_GTBEEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the GTBEEN field to a new value. +#define BW_FTM_CONF_GTBEEN(x, v) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEEN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_CONF, field GTBEOUT[10] (RW) + * + * Enables the global time base signal generation to other FTMs. + * + * Values: + * - 0 - A global time base signal generation is disabled. + * - 1 - A global time base signal generation is enabled. + */ +//@{ +#define BP_FTM_CONF_GTBEOUT (10U) //!< Bit position for FTM_CONF_GTBEOUT. +#define BM_FTM_CONF_GTBEOUT (0x00000400U) //!< Bit mask for FTM_CONF_GTBEOUT. +#define BS_FTM_CONF_GTBEOUT (1U) //!< Bit field size in bits for FTM_CONF_GTBEOUT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_CONF_GTBEOUT field. +#define BR_FTM_CONF_GTBEOUT(x) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEOUT)) +#endif + +//! @brief Format value for bitfield FTM_CONF_GTBEOUT. +#define BF_FTM_CONF_GTBEOUT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_CONF_GTBEOUT), uint32_t) & BM_FTM_CONF_GTBEOUT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the GTBEOUT field to a new value. +#define BW_FTM_CONF_GTBEOUT(x, v) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEOUT) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_FLTPOL - FTM Fault Input Polarity +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_FLTPOL - FTM Fault Input Polarity (RW) + * + * Reset value: 0x00000000U + * + * This register defines the fault inputs polarity. + */ +typedef union _hw_ftm_fltpol +{ + uint32_t U; + struct _hw_ftm_fltpol_bitfields + { + uint32_t FLT0POL : 1; //!< [0] Fault Input 0 Polarity + uint32_t FLT1POL : 1; //!< [1] Fault Input 1 Polarity + uint32_t FLT2POL : 1; //!< [2] Fault Input 2 Polarity + uint32_t FLT3POL : 1; //!< [3] Fault Input 3 Polarity + uint32_t RESERVED0 : 28; //!< [31:4] + } B; +} hw_ftm_fltpol_t; +#endif + +/*! + * @name Constants and macros for entire FTM_FLTPOL register + */ +//@{ +#define HW_FTM_FLTPOL_ADDR(x) (REGS_FTM_BASE(x) + 0x88U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_FLTPOL(x) (*(__IO hw_ftm_fltpol_t *) HW_FTM_FLTPOL_ADDR(x)) +#define HW_FTM_FLTPOL_RD(x) (HW_FTM_FLTPOL(x).U) +#define HW_FTM_FLTPOL_WR(x, v) (HW_FTM_FLTPOL(x).U = (v)) +#define HW_FTM_FLTPOL_SET(x, v) (HW_FTM_FLTPOL_WR(x, HW_FTM_FLTPOL_RD(x) | (v))) +#define HW_FTM_FLTPOL_CLR(x, v) (HW_FTM_FLTPOL_WR(x, HW_FTM_FLTPOL_RD(x) & ~(v))) +#define HW_FTM_FLTPOL_TOG(x, v) (HW_FTM_FLTPOL_WR(x, HW_FTM_FLTPOL_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_FLTPOL bitfields + */ + +/*! + * @name Register FTM_FLTPOL, field FLT0POL[0] (RW) + * + * Defines the polarity of the fault input. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault input polarity is active high. A 1 at the fault input + * indicates a fault. + * - 1 - The fault input polarity is active low. A 0 at the fault input + * indicates a fault. + */ +//@{ +#define BP_FTM_FLTPOL_FLT0POL (0U) //!< Bit position for FTM_FLTPOL_FLT0POL. +#define BM_FTM_FLTPOL_FLT0POL (0x00000001U) //!< Bit mask for FTM_FLTPOL_FLT0POL. +#define BS_FTM_FLTPOL_FLT0POL (1U) //!< Bit field size in bits for FTM_FLTPOL_FLT0POL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTPOL_FLT0POL field. +#define BR_FTM_FLTPOL_FLT0POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT0POL)) +#endif + +//! @brief Format value for bitfield FTM_FLTPOL_FLT0POL. +#define BF_FTM_FLTPOL_FLT0POL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTPOL_FLT0POL), uint32_t) & BM_FTM_FLTPOL_FLT0POL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FLT0POL field to a new value. +#define BW_FTM_FLTPOL_FLT0POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT0POL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTPOL, field FLT1POL[1] (RW) + * + * Defines the polarity of the fault input. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault input polarity is active high. A 1 at the fault input + * indicates a fault. + * - 1 - The fault input polarity is active low. A 0 at the fault input + * indicates a fault. + */ +//@{ +#define BP_FTM_FLTPOL_FLT1POL (1U) //!< Bit position for FTM_FLTPOL_FLT1POL. +#define BM_FTM_FLTPOL_FLT1POL (0x00000002U) //!< Bit mask for FTM_FLTPOL_FLT1POL. +#define BS_FTM_FLTPOL_FLT1POL (1U) //!< Bit field size in bits for FTM_FLTPOL_FLT1POL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTPOL_FLT1POL field. +#define BR_FTM_FLTPOL_FLT1POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT1POL)) +#endif + +//! @brief Format value for bitfield FTM_FLTPOL_FLT1POL. +#define BF_FTM_FLTPOL_FLT1POL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTPOL_FLT1POL), uint32_t) & BM_FTM_FLTPOL_FLT1POL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FLT1POL field to a new value. +#define BW_FTM_FLTPOL_FLT1POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT1POL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTPOL, field FLT2POL[2] (RW) + * + * Defines the polarity of the fault input. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault input polarity is active high. A 1 at the fault input + * indicates a fault. + * - 1 - The fault input polarity is active low. A 0 at the fault input + * indicates a fault. + */ +//@{ +#define BP_FTM_FLTPOL_FLT2POL (2U) //!< Bit position for FTM_FLTPOL_FLT2POL. +#define BM_FTM_FLTPOL_FLT2POL (0x00000004U) //!< Bit mask for FTM_FLTPOL_FLT2POL. +#define BS_FTM_FLTPOL_FLT2POL (1U) //!< Bit field size in bits for FTM_FLTPOL_FLT2POL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTPOL_FLT2POL field. +#define BR_FTM_FLTPOL_FLT2POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT2POL)) +#endif + +//! @brief Format value for bitfield FTM_FLTPOL_FLT2POL. +#define BF_FTM_FLTPOL_FLT2POL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTPOL_FLT2POL), uint32_t) & BM_FTM_FLTPOL_FLT2POL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FLT2POL field to a new value. +#define BW_FTM_FLTPOL_FLT2POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT2POL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_FLTPOL, field FLT3POL[3] (RW) + * + * Defines the polarity of the fault input. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault input polarity is active high. A 1 at the fault input + * indicates a fault. + * - 1 - The fault input polarity is active low. A 0 at the fault input + * indicates a fault. + */ +//@{ +#define BP_FTM_FLTPOL_FLT3POL (3U) //!< Bit position for FTM_FLTPOL_FLT3POL. +#define BM_FTM_FLTPOL_FLT3POL (0x00000008U) //!< Bit mask for FTM_FLTPOL_FLT3POL. +#define BS_FTM_FLTPOL_FLT3POL (1U) //!< Bit field size in bits for FTM_FLTPOL_FLT3POL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_FLTPOL_FLT3POL field. +#define BR_FTM_FLTPOL_FLT3POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT3POL)) +#endif + +//! @brief Format value for bitfield FTM_FLTPOL_FLT3POL. +#define BF_FTM_FLTPOL_FLT3POL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_FLTPOL_FLT3POL), uint32_t) & BM_FTM_FLTPOL_FLT3POL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FLT3POL field to a new value. +#define BW_FTM_FLTPOL_FLT3POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT3POL) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_SYNCONF - Synchronization Configuration +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_SYNCONF - Synchronization Configuration (RW) + * + * Reset value: 0x00000000U + * + * This register selects the PWM synchronization configuration, SWOCTRL, INVCTRL + * and CNTIN registers synchronization, if FTM clears the TRIGj bit, where j = + * 0, 1, 2, when the hardware trigger j is detected. + */ +typedef union _hw_ftm_synconf +{ + uint32_t U; + struct _hw_ftm_synconf_bitfields + { + uint32_t HWTRIGMODE : 1; //!< [0] Hardware Trigger Mode + uint32_t RESERVED0 : 1; //!< [1] + uint32_t CNTINC : 1; //!< [2] CNTIN Register Synchronization + uint32_t RESERVED1 : 1; //!< [3] + uint32_t INVC : 1; //!< [4] INVCTRL Register Synchronization + uint32_t SWOC : 1; //!< [5] SWOCTRL Register Synchronization + uint32_t RESERVED2 : 1; //!< [6] + uint32_t SYNCMODE : 1; //!< [7] Synchronization Mode + uint32_t SWRSTCNT : 1; //!< [8] + uint32_t SWWRBUF : 1; //!< [9] + uint32_t SWOM : 1; //!< [10] + uint32_t SWINVC : 1; //!< [11] + uint32_t SWSOC : 1; //!< [12] + uint32_t RESERVED3 : 3; //!< [15:13] + uint32_t HWRSTCNT : 1; //!< [16] + uint32_t HWWRBUF : 1; //!< [17] + uint32_t HWOM : 1; //!< [18] + uint32_t HWINVC : 1; //!< [19] + uint32_t HWSOC : 1; //!< [20] + uint32_t RESERVED4 : 11; //!< [31:21] + } B; +} hw_ftm_synconf_t; +#endif + +/*! + * @name Constants and macros for entire FTM_SYNCONF register + */ +//@{ +#define HW_FTM_SYNCONF_ADDR(x) (REGS_FTM_BASE(x) + 0x8CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_SYNCONF(x) (*(__IO hw_ftm_synconf_t *) HW_FTM_SYNCONF_ADDR(x)) +#define HW_FTM_SYNCONF_RD(x) (HW_FTM_SYNCONF(x).U) +#define HW_FTM_SYNCONF_WR(x, v) (HW_FTM_SYNCONF(x).U = (v)) +#define HW_FTM_SYNCONF_SET(x, v) (HW_FTM_SYNCONF_WR(x, HW_FTM_SYNCONF_RD(x) | (v))) +#define HW_FTM_SYNCONF_CLR(x, v) (HW_FTM_SYNCONF_WR(x, HW_FTM_SYNCONF_RD(x) & ~(v))) +#define HW_FTM_SYNCONF_TOG(x, v) (HW_FTM_SYNCONF_WR(x, HW_FTM_SYNCONF_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_SYNCONF bitfields + */ + +/*! + * @name Register FTM_SYNCONF, field HWTRIGMODE[0] (RW) + * + * Values: + * - 0 - FTM clears the TRIGj bit when the hardware trigger j is detected, where + * j = 0, 1,2. + * - 1 - FTM does not clear the TRIGj bit when the hardware trigger j is + * detected, where j = 0, 1,2. + */ +//@{ +#define BP_FTM_SYNCONF_HWTRIGMODE (0U) //!< Bit position for FTM_SYNCONF_HWTRIGMODE. +#define BM_FTM_SYNCONF_HWTRIGMODE (0x00000001U) //!< Bit mask for FTM_SYNCONF_HWTRIGMODE. +#define BS_FTM_SYNCONF_HWTRIGMODE (1U) //!< Bit field size in bits for FTM_SYNCONF_HWTRIGMODE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_HWTRIGMODE field. +#define BR_FTM_SYNCONF_HWTRIGMODE(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWTRIGMODE)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_HWTRIGMODE. +#define BF_FTM_SYNCONF_HWTRIGMODE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_HWTRIGMODE), uint32_t) & BM_FTM_SYNCONF_HWTRIGMODE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the HWTRIGMODE field to a new value. +#define BW_FTM_SYNCONF_HWTRIGMODE(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWTRIGMODE) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field CNTINC[2] (RW) + * + * Values: + * - 0 - CNTIN register is updated with its buffer value at all rising edges of + * system clock. + * - 1 - CNTIN register is updated with its buffer value by the PWM + * synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_CNTINC (2U) //!< Bit position for FTM_SYNCONF_CNTINC. +#define BM_FTM_SYNCONF_CNTINC (0x00000004U) //!< Bit mask for FTM_SYNCONF_CNTINC. +#define BS_FTM_SYNCONF_CNTINC (1U) //!< Bit field size in bits for FTM_SYNCONF_CNTINC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_CNTINC field. +#define BR_FTM_SYNCONF_CNTINC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_CNTINC)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_CNTINC. +#define BF_FTM_SYNCONF_CNTINC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_CNTINC), uint32_t) & BM_FTM_SYNCONF_CNTINC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CNTINC field to a new value. +#define BW_FTM_SYNCONF_CNTINC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_CNTINC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field INVC[4] (RW) + * + * Values: + * - 0 - INVCTRL register is updated with its buffer value at all rising edges + * of system clock. + * - 1 - INVCTRL register is updated with its buffer value by the PWM + * synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_INVC (4U) //!< Bit position for FTM_SYNCONF_INVC. +#define BM_FTM_SYNCONF_INVC (0x00000010U) //!< Bit mask for FTM_SYNCONF_INVC. +#define BS_FTM_SYNCONF_INVC (1U) //!< Bit field size in bits for FTM_SYNCONF_INVC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_INVC field. +#define BR_FTM_SYNCONF_INVC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_INVC)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_INVC. +#define BF_FTM_SYNCONF_INVC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_INVC), uint32_t) & BM_FTM_SYNCONF_INVC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the INVC field to a new value. +#define BW_FTM_SYNCONF_INVC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_INVC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field SWOC[5] (RW) + * + * Values: + * - 0 - SWOCTRL register is updated with its buffer value at all rising edges + * of system clock. + * - 1 - SWOCTRL register is updated with its buffer value by the PWM + * synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_SWOC (5U) //!< Bit position for FTM_SYNCONF_SWOC. +#define BM_FTM_SYNCONF_SWOC (0x00000020U) //!< Bit mask for FTM_SYNCONF_SWOC. +#define BS_FTM_SYNCONF_SWOC (1U) //!< Bit field size in bits for FTM_SYNCONF_SWOC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_SWOC field. +#define BR_FTM_SYNCONF_SWOC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOC)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_SWOC. +#define BF_FTM_SYNCONF_SWOC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_SWOC), uint32_t) & BM_FTM_SYNCONF_SWOC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SWOC field to a new value. +#define BW_FTM_SYNCONF_SWOC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field SYNCMODE[7] (RW) + * + * Selects the PWM Synchronization mode. + * + * Values: + * - 0 - Legacy PWM synchronization is selected. + * - 1 - Enhanced PWM synchronization is selected. + */ +//@{ +#define BP_FTM_SYNCONF_SYNCMODE (7U) //!< Bit position for FTM_SYNCONF_SYNCMODE. +#define BM_FTM_SYNCONF_SYNCMODE (0x00000080U) //!< Bit mask for FTM_SYNCONF_SYNCMODE. +#define BS_FTM_SYNCONF_SYNCMODE (1U) //!< Bit field size in bits for FTM_SYNCONF_SYNCMODE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_SYNCMODE field. +#define BR_FTM_SYNCONF_SYNCMODE(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SYNCMODE)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_SYNCMODE. +#define BF_FTM_SYNCONF_SYNCMODE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_SYNCMODE), uint32_t) & BM_FTM_SYNCONF_SYNCMODE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SYNCMODE field to a new value. +#define BW_FTM_SYNCONF_SYNCMODE(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SYNCMODE) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field SWRSTCNT[8] (RW) + * + * FTM counter synchronization is activated by the software trigger. + * + * Values: + * - 0 - The software trigger does not activate the FTM counter synchronization. + * - 1 - The software trigger activates the FTM counter synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_SWRSTCNT (8U) //!< Bit position for FTM_SYNCONF_SWRSTCNT. +#define BM_FTM_SYNCONF_SWRSTCNT (0x00000100U) //!< Bit mask for FTM_SYNCONF_SWRSTCNT. +#define BS_FTM_SYNCONF_SWRSTCNT (1U) //!< Bit field size in bits for FTM_SYNCONF_SWRSTCNT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_SWRSTCNT field. +#define BR_FTM_SYNCONF_SWRSTCNT(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWRSTCNT)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_SWRSTCNT. +#define BF_FTM_SYNCONF_SWRSTCNT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_SWRSTCNT), uint32_t) & BM_FTM_SYNCONF_SWRSTCNT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SWRSTCNT field to a new value. +#define BW_FTM_SYNCONF_SWRSTCNT(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWRSTCNT) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field SWWRBUF[9] (RW) + * + * MOD, CNTIN, and CV registers synchronization is activated by the software + * trigger. + * + * Values: + * - 0 - The software trigger does not activate MOD, CNTIN, and CV registers + * synchronization. + * - 1 - The software trigger activates MOD, CNTIN, and CV registers + * synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_SWWRBUF (9U) //!< Bit position for FTM_SYNCONF_SWWRBUF. +#define BM_FTM_SYNCONF_SWWRBUF (0x00000200U) //!< Bit mask for FTM_SYNCONF_SWWRBUF. +#define BS_FTM_SYNCONF_SWWRBUF (1U) //!< Bit field size in bits for FTM_SYNCONF_SWWRBUF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_SWWRBUF field. +#define BR_FTM_SYNCONF_SWWRBUF(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWWRBUF)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_SWWRBUF. +#define BF_FTM_SYNCONF_SWWRBUF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_SWWRBUF), uint32_t) & BM_FTM_SYNCONF_SWWRBUF) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SWWRBUF field to a new value. +#define BW_FTM_SYNCONF_SWWRBUF(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWWRBUF) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field SWOM[10] (RW) + * + * Output mask synchronization is activated by the software trigger. + * + * Values: + * - 0 - The software trigger does not activate the OUTMASK register + * synchronization. + * - 1 - The software trigger activates the OUTMASK register synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_SWOM (10U) //!< Bit position for FTM_SYNCONF_SWOM. +#define BM_FTM_SYNCONF_SWOM (0x00000400U) //!< Bit mask for FTM_SYNCONF_SWOM. +#define BS_FTM_SYNCONF_SWOM (1U) //!< Bit field size in bits for FTM_SYNCONF_SWOM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_SWOM field. +#define BR_FTM_SYNCONF_SWOM(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOM)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_SWOM. +#define BF_FTM_SYNCONF_SWOM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_SWOM), uint32_t) & BM_FTM_SYNCONF_SWOM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SWOM field to a new value. +#define BW_FTM_SYNCONF_SWOM(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field SWINVC[11] (RW) + * + * Inverting control synchronization is activated by the software trigger. + * + * Values: + * - 0 - The software trigger does not activate the INVCTRL register + * synchronization. + * - 1 - The software trigger activates the INVCTRL register synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_SWINVC (11U) //!< Bit position for FTM_SYNCONF_SWINVC. +#define BM_FTM_SYNCONF_SWINVC (0x00000800U) //!< Bit mask for FTM_SYNCONF_SWINVC. +#define BS_FTM_SYNCONF_SWINVC (1U) //!< Bit field size in bits for FTM_SYNCONF_SWINVC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_SWINVC field. +#define BR_FTM_SYNCONF_SWINVC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWINVC)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_SWINVC. +#define BF_FTM_SYNCONF_SWINVC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_SWINVC), uint32_t) & BM_FTM_SYNCONF_SWINVC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SWINVC field to a new value. +#define BW_FTM_SYNCONF_SWINVC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWINVC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field SWSOC[12] (RW) + * + * Software output control synchronization is activated by the software trigger. + * + * Values: + * - 0 - The software trigger does not activate the SWOCTRL register + * synchronization. + * - 1 - The software trigger activates the SWOCTRL register synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_SWSOC (12U) //!< Bit position for FTM_SYNCONF_SWSOC. +#define BM_FTM_SYNCONF_SWSOC (0x00001000U) //!< Bit mask for FTM_SYNCONF_SWSOC. +#define BS_FTM_SYNCONF_SWSOC (1U) //!< Bit field size in bits for FTM_SYNCONF_SWSOC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_SWSOC field. +#define BR_FTM_SYNCONF_SWSOC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWSOC)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_SWSOC. +#define BF_FTM_SYNCONF_SWSOC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_SWSOC), uint32_t) & BM_FTM_SYNCONF_SWSOC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SWSOC field to a new value. +#define BW_FTM_SYNCONF_SWSOC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWSOC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field HWRSTCNT[16] (RW) + * + * FTM counter synchronization is activated by a hardware trigger. + * + * Values: + * - 0 - A hardware trigger does not activate the FTM counter synchronization. + * - 1 - A hardware trigger activates the FTM counter synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_HWRSTCNT (16U) //!< Bit position for FTM_SYNCONF_HWRSTCNT. +#define BM_FTM_SYNCONF_HWRSTCNT (0x00010000U) //!< Bit mask for FTM_SYNCONF_HWRSTCNT. +#define BS_FTM_SYNCONF_HWRSTCNT (1U) //!< Bit field size in bits for FTM_SYNCONF_HWRSTCNT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_HWRSTCNT field. +#define BR_FTM_SYNCONF_HWRSTCNT(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWRSTCNT)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_HWRSTCNT. +#define BF_FTM_SYNCONF_HWRSTCNT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_HWRSTCNT), uint32_t) & BM_FTM_SYNCONF_HWRSTCNT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the HWRSTCNT field to a new value. +#define BW_FTM_SYNCONF_HWRSTCNT(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWRSTCNT) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field HWWRBUF[17] (RW) + * + * MOD, CNTIN, and CV registers synchronization is activated by a hardware + * trigger. + * + * Values: + * - 0 - A hardware trigger does not activate MOD, CNTIN, and CV registers + * synchronization. + * - 1 - A hardware trigger activates MOD, CNTIN, and CV registers + * synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_HWWRBUF (17U) //!< Bit position for FTM_SYNCONF_HWWRBUF. +#define BM_FTM_SYNCONF_HWWRBUF (0x00020000U) //!< Bit mask for FTM_SYNCONF_HWWRBUF. +#define BS_FTM_SYNCONF_HWWRBUF (1U) //!< Bit field size in bits for FTM_SYNCONF_HWWRBUF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_HWWRBUF field. +#define BR_FTM_SYNCONF_HWWRBUF(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWWRBUF)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_HWWRBUF. +#define BF_FTM_SYNCONF_HWWRBUF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_HWWRBUF), uint32_t) & BM_FTM_SYNCONF_HWWRBUF) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the HWWRBUF field to a new value. +#define BW_FTM_SYNCONF_HWWRBUF(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWWRBUF) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field HWOM[18] (RW) + * + * Output mask synchronization is activated by a hardware trigger. + * + * Values: + * - 0 - A hardware trigger does not activate the OUTMASK register + * synchronization. + * - 1 - A hardware trigger activates the OUTMASK register synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_HWOM (18U) //!< Bit position for FTM_SYNCONF_HWOM. +#define BM_FTM_SYNCONF_HWOM (0x00040000U) //!< Bit mask for FTM_SYNCONF_HWOM. +#define BS_FTM_SYNCONF_HWOM (1U) //!< Bit field size in bits for FTM_SYNCONF_HWOM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_HWOM field. +#define BR_FTM_SYNCONF_HWOM(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWOM)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_HWOM. +#define BF_FTM_SYNCONF_HWOM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_HWOM), uint32_t) & BM_FTM_SYNCONF_HWOM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the HWOM field to a new value. +#define BW_FTM_SYNCONF_HWOM(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWOM) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field HWINVC[19] (RW) + * + * Inverting control synchronization is activated by a hardware trigger. + * + * Values: + * - 0 - A hardware trigger does not activate the INVCTRL register + * synchronization. + * - 1 - A hardware trigger activates the INVCTRL register synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_HWINVC (19U) //!< Bit position for FTM_SYNCONF_HWINVC. +#define BM_FTM_SYNCONF_HWINVC (0x00080000U) //!< Bit mask for FTM_SYNCONF_HWINVC. +#define BS_FTM_SYNCONF_HWINVC (1U) //!< Bit field size in bits for FTM_SYNCONF_HWINVC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_HWINVC field. +#define BR_FTM_SYNCONF_HWINVC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWINVC)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_HWINVC. +#define BF_FTM_SYNCONF_HWINVC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_HWINVC), uint32_t) & BM_FTM_SYNCONF_HWINVC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the HWINVC field to a new value. +#define BW_FTM_SYNCONF_HWINVC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWINVC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SYNCONF, field HWSOC[20] (RW) + * + * Software output control synchronization is activated by a hardware trigger. + * + * Values: + * - 0 - A hardware trigger does not activate the SWOCTRL register + * synchronization. + * - 1 - A hardware trigger activates the SWOCTRL register synchronization. + */ +//@{ +#define BP_FTM_SYNCONF_HWSOC (20U) //!< Bit position for FTM_SYNCONF_HWSOC. +#define BM_FTM_SYNCONF_HWSOC (0x00100000U) //!< Bit mask for FTM_SYNCONF_HWSOC. +#define BS_FTM_SYNCONF_HWSOC (1U) //!< Bit field size in bits for FTM_SYNCONF_HWSOC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SYNCONF_HWSOC field. +#define BR_FTM_SYNCONF_HWSOC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWSOC)) +#endif + +//! @brief Format value for bitfield FTM_SYNCONF_HWSOC. +#define BF_FTM_SYNCONF_HWSOC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SYNCONF_HWSOC), uint32_t) & BM_FTM_SYNCONF_HWSOC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the HWSOC field to a new value. +#define BW_FTM_SYNCONF_HWSOC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWSOC) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_INVCTRL - FTM Inverting Control +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_INVCTRL - FTM Inverting Control (RW) + * + * Reset value: 0x00000000U + * + * This register controls when the channel (n) output becomes the channel (n+1) + * output, and channel (n+1) output becomes the channel (n) output. Each INVmEN + * bit enables the inverting operation for the corresponding pair channels m. This + * register has a write buffer. The INVmEN bit is updated by the INVCTRL + * register synchronization. + */ +typedef union _hw_ftm_invctrl +{ + uint32_t U; + struct _hw_ftm_invctrl_bitfields + { + uint32_t INV0EN : 1; //!< [0] Pair Channels 0 Inverting Enable + uint32_t INV1EN : 1; //!< [1] Pair Channels 1 Inverting Enable + uint32_t INV2EN : 1; //!< [2] Pair Channels 2 Inverting Enable + uint32_t INV3EN : 1; //!< [3] Pair Channels 3 Inverting Enable + uint32_t RESERVED0 : 28; //!< [31:4] + } B; +} hw_ftm_invctrl_t; +#endif + +/*! + * @name Constants and macros for entire FTM_INVCTRL register + */ +//@{ +#define HW_FTM_INVCTRL_ADDR(x) (REGS_FTM_BASE(x) + 0x90U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_INVCTRL(x) (*(__IO hw_ftm_invctrl_t *) HW_FTM_INVCTRL_ADDR(x)) +#define HW_FTM_INVCTRL_RD(x) (HW_FTM_INVCTRL(x).U) +#define HW_FTM_INVCTRL_WR(x, v) (HW_FTM_INVCTRL(x).U = (v)) +#define HW_FTM_INVCTRL_SET(x, v) (HW_FTM_INVCTRL_WR(x, HW_FTM_INVCTRL_RD(x) | (v))) +#define HW_FTM_INVCTRL_CLR(x, v) (HW_FTM_INVCTRL_WR(x, HW_FTM_INVCTRL_RD(x) & ~(v))) +#define HW_FTM_INVCTRL_TOG(x, v) (HW_FTM_INVCTRL_WR(x, HW_FTM_INVCTRL_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_INVCTRL bitfields + */ + +/*! + * @name Register FTM_INVCTRL, field INV0EN[0] (RW) + * + * Values: + * - 0 - Inverting is disabled. + * - 1 - Inverting is enabled. + */ +//@{ +#define BP_FTM_INVCTRL_INV0EN (0U) //!< Bit position for FTM_INVCTRL_INV0EN. +#define BM_FTM_INVCTRL_INV0EN (0x00000001U) //!< Bit mask for FTM_INVCTRL_INV0EN. +#define BS_FTM_INVCTRL_INV0EN (1U) //!< Bit field size in bits for FTM_INVCTRL_INV0EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_INVCTRL_INV0EN field. +#define BR_FTM_INVCTRL_INV0EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV0EN)) +#endif + +//! @brief Format value for bitfield FTM_INVCTRL_INV0EN. +#define BF_FTM_INVCTRL_INV0EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_INVCTRL_INV0EN), uint32_t) & BM_FTM_INVCTRL_INV0EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the INV0EN field to a new value. +#define BW_FTM_INVCTRL_INV0EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV0EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_INVCTRL, field INV1EN[1] (RW) + * + * Values: + * - 0 - Inverting is disabled. + * - 1 - Inverting is enabled. + */ +//@{ +#define BP_FTM_INVCTRL_INV1EN (1U) //!< Bit position for FTM_INVCTRL_INV1EN. +#define BM_FTM_INVCTRL_INV1EN (0x00000002U) //!< Bit mask for FTM_INVCTRL_INV1EN. +#define BS_FTM_INVCTRL_INV1EN (1U) //!< Bit field size in bits for FTM_INVCTRL_INV1EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_INVCTRL_INV1EN field. +#define BR_FTM_INVCTRL_INV1EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV1EN)) +#endif + +//! @brief Format value for bitfield FTM_INVCTRL_INV1EN. +#define BF_FTM_INVCTRL_INV1EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_INVCTRL_INV1EN), uint32_t) & BM_FTM_INVCTRL_INV1EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the INV1EN field to a new value. +#define BW_FTM_INVCTRL_INV1EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV1EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_INVCTRL, field INV2EN[2] (RW) + * + * Values: + * - 0 - Inverting is disabled. + * - 1 - Inverting is enabled. + */ +//@{ +#define BP_FTM_INVCTRL_INV2EN (2U) //!< Bit position for FTM_INVCTRL_INV2EN. +#define BM_FTM_INVCTRL_INV2EN (0x00000004U) //!< Bit mask for FTM_INVCTRL_INV2EN. +#define BS_FTM_INVCTRL_INV2EN (1U) //!< Bit field size in bits for FTM_INVCTRL_INV2EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_INVCTRL_INV2EN field. +#define BR_FTM_INVCTRL_INV2EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV2EN)) +#endif + +//! @brief Format value for bitfield FTM_INVCTRL_INV2EN. +#define BF_FTM_INVCTRL_INV2EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_INVCTRL_INV2EN), uint32_t) & BM_FTM_INVCTRL_INV2EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the INV2EN field to a new value. +#define BW_FTM_INVCTRL_INV2EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV2EN) = (v)) +#endif +//@} + +/*! + * @name Register FTM_INVCTRL, field INV3EN[3] (RW) + * + * Values: + * - 0 - Inverting is disabled. + * - 1 - Inverting is enabled. + */ +//@{ +#define BP_FTM_INVCTRL_INV3EN (3U) //!< Bit position for FTM_INVCTRL_INV3EN. +#define BM_FTM_INVCTRL_INV3EN (0x00000008U) //!< Bit mask for FTM_INVCTRL_INV3EN. +#define BS_FTM_INVCTRL_INV3EN (1U) //!< Bit field size in bits for FTM_INVCTRL_INV3EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_INVCTRL_INV3EN field. +#define BR_FTM_INVCTRL_INV3EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV3EN)) +#endif + +//! @brief Format value for bitfield FTM_INVCTRL_INV3EN. +#define BF_FTM_INVCTRL_INV3EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_INVCTRL_INV3EN), uint32_t) & BM_FTM_INVCTRL_INV3EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the INV3EN field to a new value. +#define BW_FTM_INVCTRL_INV3EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV3EN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_SWOCTRL - FTM Software Output Control +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_SWOCTRL - FTM Software Output Control (RW) + * + * Reset value: 0x00000000U + * + * This register enables software control of channel (n) output and defines the + * value forced to the channel (n) output: The CHnOC bits enable the control of + * the corresponding channel (n) output by software. The CHnOCV bits select the + * value that is forced at the corresponding channel (n) output. This register has + * a write buffer. The fields are updated by the SWOCTRL register synchronization. + */ +typedef union _hw_ftm_swoctrl +{ + uint32_t U; + struct _hw_ftm_swoctrl_bitfields + { + uint32_t CH0OC : 1; //!< [0] Channel 0 Software Output Control Enable + uint32_t CH1OC : 1; //!< [1] Channel 1 Software Output Control Enable + uint32_t CH2OC : 1; //!< [2] Channel 2 Software Output Control Enable + uint32_t CH3OC : 1; //!< [3] Channel 3 Software Output Control Enable + uint32_t CH4OC : 1; //!< [4] Channel 4 Software Output Control Enable + uint32_t CH5OC : 1; //!< [5] Channel 5 Software Output Control Enable + uint32_t CH6OC : 1; //!< [6] Channel 6 Software Output Control Enable + uint32_t CH7OC : 1; //!< [7] Channel 7 Software Output Control Enable + uint32_t CH0OCV : 1; //!< [8] Channel 0 Software Output Control Value + uint32_t CH1OCV : 1; //!< [9] Channel 1 Software Output Control Value + uint32_t CH2OCV : 1; //!< [10] Channel 2 Software Output Control Value + uint32_t CH3OCV : 1; //!< [11] Channel 3 Software Output Control Value + uint32_t CH4OCV : 1; //!< [12] Channel 4 Software Output Control Value + uint32_t CH5OCV : 1; //!< [13] Channel 5 Software Output Control Value + uint32_t CH6OCV : 1; //!< [14] Channel 6 Software Output Control Value + uint32_t CH7OCV : 1; //!< [15] Channel 7 Software Output Control Value + uint32_t RESERVED0 : 16; //!< [31:16] + } B; +} hw_ftm_swoctrl_t; +#endif + +/*! + * @name Constants and macros for entire FTM_SWOCTRL register + */ +//@{ +#define HW_FTM_SWOCTRL_ADDR(x) (REGS_FTM_BASE(x) + 0x94U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_SWOCTRL(x) (*(__IO hw_ftm_swoctrl_t *) HW_FTM_SWOCTRL_ADDR(x)) +#define HW_FTM_SWOCTRL_RD(x) (HW_FTM_SWOCTRL(x).U) +#define HW_FTM_SWOCTRL_WR(x, v) (HW_FTM_SWOCTRL(x).U = (v)) +#define HW_FTM_SWOCTRL_SET(x, v) (HW_FTM_SWOCTRL_WR(x, HW_FTM_SWOCTRL_RD(x) | (v))) +#define HW_FTM_SWOCTRL_CLR(x, v) (HW_FTM_SWOCTRL_WR(x, HW_FTM_SWOCTRL_RD(x) & ~(v))) +#define HW_FTM_SWOCTRL_TOG(x, v) (HW_FTM_SWOCTRL_WR(x, HW_FTM_SWOCTRL_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_SWOCTRL bitfields + */ + +/*! + * @name Register FTM_SWOCTRL, field CH0OC[0] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +//@{ +#define BP_FTM_SWOCTRL_CH0OC (0U) //!< Bit position for FTM_SWOCTRL_CH0OC. +#define BM_FTM_SWOCTRL_CH0OC (0x00000001U) //!< Bit mask for FTM_SWOCTRL_CH0OC. +#define BS_FTM_SWOCTRL_CH0OC (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH0OC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH0OC field. +#define BR_FTM_SWOCTRL_CH0OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OC)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH0OC. +#define BF_FTM_SWOCTRL_CH0OC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH0OC), uint32_t) & BM_FTM_SWOCTRL_CH0OC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH0OC field to a new value. +#define BW_FTM_SWOCTRL_CH0OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH1OC[1] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +//@{ +#define BP_FTM_SWOCTRL_CH1OC (1U) //!< Bit position for FTM_SWOCTRL_CH1OC. +#define BM_FTM_SWOCTRL_CH1OC (0x00000002U) //!< Bit mask for FTM_SWOCTRL_CH1OC. +#define BS_FTM_SWOCTRL_CH1OC (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH1OC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH1OC field. +#define BR_FTM_SWOCTRL_CH1OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OC)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH1OC. +#define BF_FTM_SWOCTRL_CH1OC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH1OC), uint32_t) & BM_FTM_SWOCTRL_CH1OC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH1OC field to a new value. +#define BW_FTM_SWOCTRL_CH1OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH2OC[2] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +//@{ +#define BP_FTM_SWOCTRL_CH2OC (2U) //!< Bit position for FTM_SWOCTRL_CH2OC. +#define BM_FTM_SWOCTRL_CH2OC (0x00000004U) //!< Bit mask for FTM_SWOCTRL_CH2OC. +#define BS_FTM_SWOCTRL_CH2OC (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH2OC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH2OC field. +#define BR_FTM_SWOCTRL_CH2OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OC)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH2OC. +#define BF_FTM_SWOCTRL_CH2OC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH2OC), uint32_t) & BM_FTM_SWOCTRL_CH2OC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH2OC field to a new value. +#define BW_FTM_SWOCTRL_CH2OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH3OC[3] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +//@{ +#define BP_FTM_SWOCTRL_CH3OC (3U) //!< Bit position for FTM_SWOCTRL_CH3OC. +#define BM_FTM_SWOCTRL_CH3OC (0x00000008U) //!< Bit mask for FTM_SWOCTRL_CH3OC. +#define BS_FTM_SWOCTRL_CH3OC (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH3OC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH3OC field. +#define BR_FTM_SWOCTRL_CH3OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OC)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH3OC. +#define BF_FTM_SWOCTRL_CH3OC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH3OC), uint32_t) & BM_FTM_SWOCTRL_CH3OC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH3OC field to a new value. +#define BW_FTM_SWOCTRL_CH3OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH4OC[4] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +//@{ +#define BP_FTM_SWOCTRL_CH4OC (4U) //!< Bit position for FTM_SWOCTRL_CH4OC. +#define BM_FTM_SWOCTRL_CH4OC (0x00000010U) //!< Bit mask for FTM_SWOCTRL_CH4OC. +#define BS_FTM_SWOCTRL_CH4OC (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH4OC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH4OC field. +#define BR_FTM_SWOCTRL_CH4OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OC)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH4OC. +#define BF_FTM_SWOCTRL_CH4OC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH4OC), uint32_t) & BM_FTM_SWOCTRL_CH4OC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH4OC field to a new value. +#define BW_FTM_SWOCTRL_CH4OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH5OC[5] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +//@{ +#define BP_FTM_SWOCTRL_CH5OC (5U) //!< Bit position for FTM_SWOCTRL_CH5OC. +#define BM_FTM_SWOCTRL_CH5OC (0x00000020U) //!< Bit mask for FTM_SWOCTRL_CH5OC. +#define BS_FTM_SWOCTRL_CH5OC (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH5OC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH5OC field. +#define BR_FTM_SWOCTRL_CH5OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OC)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH5OC. +#define BF_FTM_SWOCTRL_CH5OC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH5OC), uint32_t) & BM_FTM_SWOCTRL_CH5OC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH5OC field to a new value. +#define BW_FTM_SWOCTRL_CH5OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH6OC[6] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +//@{ +#define BP_FTM_SWOCTRL_CH6OC (6U) //!< Bit position for FTM_SWOCTRL_CH6OC. +#define BM_FTM_SWOCTRL_CH6OC (0x00000040U) //!< Bit mask for FTM_SWOCTRL_CH6OC. +#define BS_FTM_SWOCTRL_CH6OC (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH6OC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH6OC field. +#define BR_FTM_SWOCTRL_CH6OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OC)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH6OC. +#define BF_FTM_SWOCTRL_CH6OC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH6OC), uint32_t) & BM_FTM_SWOCTRL_CH6OC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH6OC field to a new value. +#define BW_FTM_SWOCTRL_CH6OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH7OC[7] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +//@{ +#define BP_FTM_SWOCTRL_CH7OC (7U) //!< Bit position for FTM_SWOCTRL_CH7OC. +#define BM_FTM_SWOCTRL_CH7OC (0x00000080U) //!< Bit mask for FTM_SWOCTRL_CH7OC. +#define BS_FTM_SWOCTRL_CH7OC (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH7OC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH7OC field. +#define BR_FTM_SWOCTRL_CH7OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OC)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH7OC. +#define BF_FTM_SWOCTRL_CH7OC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH7OC), uint32_t) & BM_FTM_SWOCTRL_CH7OC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH7OC field to a new value. +#define BW_FTM_SWOCTRL_CH7OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OC) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH0OCV[8] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +//@{ +#define BP_FTM_SWOCTRL_CH0OCV (8U) //!< Bit position for FTM_SWOCTRL_CH0OCV. +#define BM_FTM_SWOCTRL_CH0OCV (0x00000100U) //!< Bit mask for FTM_SWOCTRL_CH0OCV. +#define BS_FTM_SWOCTRL_CH0OCV (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH0OCV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH0OCV field. +#define BR_FTM_SWOCTRL_CH0OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OCV)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH0OCV. +#define BF_FTM_SWOCTRL_CH0OCV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH0OCV), uint32_t) & BM_FTM_SWOCTRL_CH0OCV) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH0OCV field to a new value. +#define BW_FTM_SWOCTRL_CH0OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OCV) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH1OCV[9] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +//@{ +#define BP_FTM_SWOCTRL_CH1OCV (9U) //!< Bit position for FTM_SWOCTRL_CH1OCV. +#define BM_FTM_SWOCTRL_CH1OCV (0x00000200U) //!< Bit mask for FTM_SWOCTRL_CH1OCV. +#define BS_FTM_SWOCTRL_CH1OCV (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH1OCV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH1OCV field. +#define BR_FTM_SWOCTRL_CH1OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OCV)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH1OCV. +#define BF_FTM_SWOCTRL_CH1OCV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH1OCV), uint32_t) & BM_FTM_SWOCTRL_CH1OCV) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH1OCV field to a new value. +#define BW_FTM_SWOCTRL_CH1OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OCV) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH2OCV[10] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +//@{ +#define BP_FTM_SWOCTRL_CH2OCV (10U) //!< Bit position for FTM_SWOCTRL_CH2OCV. +#define BM_FTM_SWOCTRL_CH2OCV (0x00000400U) //!< Bit mask for FTM_SWOCTRL_CH2OCV. +#define BS_FTM_SWOCTRL_CH2OCV (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH2OCV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH2OCV field. +#define BR_FTM_SWOCTRL_CH2OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OCV)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH2OCV. +#define BF_FTM_SWOCTRL_CH2OCV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH2OCV), uint32_t) & BM_FTM_SWOCTRL_CH2OCV) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH2OCV field to a new value. +#define BW_FTM_SWOCTRL_CH2OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OCV) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH3OCV[11] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +//@{ +#define BP_FTM_SWOCTRL_CH3OCV (11U) //!< Bit position for FTM_SWOCTRL_CH3OCV. +#define BM_FTM_SWOCTRL_CH3OCV (0x00000800U) //!< Bit mask for FTM_SWOCTRL_CH3OCV. +#define BS_FTM_SWOCTRL_CH3OCV (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH3OCV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH3OCV field. +#define BR_FTM_SWOCTRL_CH3OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OCV)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH3OCV. +#define BF_FTM_SWOCTRL_CH3OCV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH3OCV), uint32_t) & BM_FTM_SWOCTRL_CH3OCV) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH3OCV field to a new value. +#define BW_FTM_SWOCTRL_CH3OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OCV) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH4OCV[12] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +//@{ +#define BP_FTM_SWOCTRL_CH4OCV (12U) //!< Bit position for FTM_SWOCTRL_CH4OCV. +#define BM_FTM_SWOCTRL_CH4OCV (0x00001000U) //!< Bit mask for FTM_SWOCTRL_CH4OCV. +#define BS_FTM_SWOCTRL_CH4OCV (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH4OCV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH4OCV field. +#define BR_FTM_SWOCTRL_CH4OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OCV)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH4OCV. +#define BF_FTM_SWOCTRL_CH4OCV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH4OCV), uint32_t) & BM_FTM_SWOCTRL_CH4OCV) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH4OCV field to a new value. +#define BW_FTM_SWOCTRL_CH4OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OCV) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH5OCV[13] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +//@{ +#define BP_FTM_SWOCTRL_CH5OCV (13U) //!< Bit position for FTM_SWOCTRL_CH5OCV. +#define BM_FTM_SWOCTRL_CH5OCV (0x00002000U) //!< Bit mask for FTM_SWOCTRL_CH5OCV. +#define BS_FTM_SWOCTRL_CH5OCV (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH5OCV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH5OCV field. +#define BR_FTM_SWOCTRL_CH5OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OCV)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH5OCV. +#define BF_FTM_SWOCTRL_CH5OCV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH5OCV), uint32_t) & BM_FTM_SWOCTRL_CH5OCV) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH5OCV field to a new value. +#define BW_FTM_SWOCTRL_CH5OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OCV) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH6OCV[14] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +//@{ +#define BP_FTM_SWOCTRL_CH6OCV (14U) //!< Bit position for FTM_SWOCTRL_CH6OCV. +#define BM_FTM_SWOCTRL_CH6OCV (0x00004000U) //!< Bit mask for FTM_SWOCTRL_CH6OCV. +#define BS_FTM_SWOCTRL_CH6OCV (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH6OCV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH6OCV field. +#define BR_FTM_SWOCTRL_CH6OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OCV)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH6OCV. +#define BF_FTM_SWOCTRL_CH6OCV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH6OCV), uint32_t) & BM_FTM_SWOCTRL_CH6OCV) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH6OCV field to a new value. +#define BW_FTM_SWOCTRL_CH6OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OCV) = (v)) +#endif +//@} + +/*! + * @name Register FTM_SWOCTRL, field CH7OCV[15] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +//@{ +#define BP_FTM_SWOCTRL_CH7OCV (15U) //!< Bit position for FTM_SWOCTRL_CH7OCV. +#define BM_FTM_SWOCTRL_CH7OCV (0x00008000U) //!< Bit mask for FTM_SWOCTRL_CH7OCV. +#define BS_FTM_SWOCTRL_CH7OCV (1U) //!< Bit field size in bits for FTM_SWOCTRL_CH7OCV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_SWOCTRL_CH7OCV field. +#define BR_FTM_SWOCTRL_CH7OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OCV)) +#endif + +//! @brief Format value for bitfield FTM_SWOCTRL_CH7OCV. +#define BF_FTM_SWOCTRL_CH7OCV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_SWOCTRL_CH7OCV), uint32_t) & BM_FTM_SWOCTRL_CH7OCV) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH7OCV field to a new value. +#define BW_FTM_SWOCTRL_CH7OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OCV) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_FTM_PWMLOAD - FTM PWM Load +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_FTM_PWMLOAD - FTM PWM Load (RW) + * + * Reset value: 0x00000000U + * + * Enables the loading of the MOD, CNTIN, C(n)V, and C(n+1)V registers with the + * values of their write buffers when the FTM counter changes from the MOD + * register value to its next value or when a channel (j) match occurs. A match occurs + * for the channel (j) when FTM counter = C(j)V. + */ +typedef union _hw_ftm_pwmload +{ + uint32_t U; + struct _hw_ftm_pwmload_bitfields + { + uint32_t CH0SEL : 1; //!< [0] Channel 0 Select + uint32_t CH1SEL : 1; //!< [1] Channel 1 Select + uint32_t CH2SEL : 1; //!< [2] Channel 2 Select + uint32_t CH3SEL : 1; //!< [3] Channel 3 Select + uint32_t CH4SEL : 1; //!< [4] Channel 4 Select + uint32_t CH5SEL : 1; //!< [5] Channel 5 Select + uint32_t CH6SEL : 1; //!< [6] Channel 6 Select + uint32_t CH7SEL : 1; //!< [7] Channel 7 Select + uint32_t RESERVED0 : 1; //!< [8] + uint32_t LDOK : 1; //!< [9] Load Enable + uint32_t RESERVED1 : 22; //!< [31:10] + } B; +} hw_ftm_pwmload_t; +#endif + +/*! + * @name Constants and macros for entire FTM_PWMLOAD register + */ +//@{ +#define HW_FTM_PWMLOAD_ADDR(x) (REGS_FTM_BASE(x) + 0x98U) + +#ifndef __LANGUAGE_ASM__ +#define HW_FTM_PWMLOAD(x) (*(__IO hw_ftm_pwmload_t *) HW_FTM_PWMLOAD_ADDR(x)) +#define HW_FTM_PWMLOAD_RD(x) (HW_FTM_PWMLOAD(x).U) +#define HW_FTM_PWMLOAD_WR(x, v) (HW_FTM_PWMLOAD(x).U = (v)) +#define HW_FTM_PWMLOAD_SET(x, v) (HW_FTM_PWMLOAD_WR(x, HW_FTM_PWMLOAD_RD(x) | (v))) +#define HW_FTM_PWMLOAD_CLR(x, v) (HW_FTM_PWMLOAD_WR(x, HW_FTM_PWMLOAD_RD(x) & ~(v))) +#define HW_FTM_PWMLOAD_TOG(x, v) (HW_FTM_PWMLOAD_WR(x, HW_FTM_PWMLOAD_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual FTM_PWMLOAD bitfields + */ + +/*! + * @name Register FTM_PWMLOAD, field CH0SEL[0] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +//@{ +#define BP_FTM_PWMLOAD_CH0SEL (0U) //!< Bit position for FTM_PWMLOAD_CH0SEL. +#define BM_FTM_PWMLOAD_CH0SEL (0x00000001U) //!< Bit mask for FTM_PWMLOAD_CH0SEL. +#define BS_FTM_PWMLOAD_CH0SEL (1U) //!< Bit field size in bits for FTM_PWMLOAD_CH0SEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_PWMLOAD_CH0SEL field. +#define BR_FTM_PWMLOAD_CH0SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH0SEL)) +#endif + +//! @brief Format value for bitfield FTM_PWMLOAD_CH0SEL. +#define BF_FTM_PWMLOAD_CH0SEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_PWMLOAD_CH0SEL), uint32_t) & BM_FTM_PWMLOAD_CH0SEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH0SEL field to a new value. +#define BW_FTM_PWMLOAD_CH0SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH0SEL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_PWMLOAD, field CH1SEL[1] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +//@{ +#define BP_FTM_PWMLOAD_CH1SEL (1U) //!< Bit position for FTM_PWMLOAD_CH1SEL. +#define BM_FTM_PWMLOAD_CH1SEL (0x00000002U) //!< Bit mask for FTM_PWMLOAD_CH1SEL. +#define BS_FTM_PWMLOAD_CH1SEL (1U) //!< Bit field size in bits for FTM_PWMLOAD_CH1SEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_PWMLOAD_CH1SEL field. +#define BR_FTM_PWMLOAD_CH1SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH1SEL)) +#endif + +//! @brief Format value for bitfield FTM_PWMLOAD_CH1SEL. +#define BF_FTM_PWMLOAD_CH1SEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_PWMLOAD_CH1SEL), uint32_t) & BM_FTM_PWMLOAD_CH1SEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH1SEL field to a new value. +#define BW_FTM_PWMLOAD_CH1SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH1SEL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_PWMLOAD, field CH2SEL[2] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +//@{ +#define BP_FTM_PWMLOAD_CH2SEL (2U) //!< Bit position for FTM_PWMLOAD_CH2SEL. +#define BM_FTM_PWMLOAD_CH2SEL (0x00000004U) //!< Bit mask for FTM_PWMLOAD_CH2SEL. +#define BS_FTM_PWMLOAD_CH2SEL (1U) //!< Bit field size in bits for FTM_PWMLOAD_CH2SEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_PWMLOAD_CH2SEL field. +#define BR_FTM_PWMLOAD_CH2SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH2SEL)) +#endif + +//! @brief Format value for bitfield FTM_PWMLOAD_CH2SEL. +#define BF_FTM_PWMLOAD_CH2SEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_PWMLOAD_CH2SEL), uint32_t) & BM_FTM_PWMLOAD_CH2SEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH2SEL field to a new value. +#define BW_FTM_PWMLOAD_CH2SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH2SEL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_PWMLOAD, field CH3SEL[3] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +//@{ +#define BP_FTM_PWMLOAD_CH3SEL (3U) //!< Bit position for FTM_PWMLOAD_CH3SEL. +#define BM_FTM_PWMLOAD_CH3SEL (0x00000008U) //!< Bit mask for FTM_PWMLOAD_CH3SEL. +#define BS_FTM_PWMLOAD_CH3SEL (1U) //!< Bit field size in bits for FTM_PWMLOAD_CH3SEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_PWMLOAD_CH3SEL field. +#define BR_FTM_PWMLOAD_CH3SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH3SEL)) +#endif + +//! @brief Format value for bitfield FTM_PWMLOAD_CH3SEL. +#define BF_FTM_PWMLOAD_CH3SEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_PWMLOAD_CH3SEL), uint32_t) & BM_FTM_PWMLOAD_CH3SEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH3SEL field to a new value. +#define BW_FTM_PWMLOAD_CH3SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH3SEL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_PWMLOAD, field CH4SEL[4] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +//@{ +#define BP_FTM_PWMLOAD_CH4SEL (4U) //!< Bit position for FTM_PWMLOAD_CH4SEL. +#define BM_FTM_PWMLOAD_CH4SEL (0x00000010U) //!< Bit mask for FTM_PWMLOAD_CH4SEL. +#define BS_FTM_PWMLOAD_CH4SEL (1U) //!< Bit field size in bits for FTM_PWMLOAD_CH4SEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_PWMLOAD_CH4SEL field. +#define BR_FTM_PWMLOAD_CH4SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH4SEL)) +#endif + +//! @brief Format value for bitfield FTM_PWMLOAD_CH4SEL. +#define BF_FTM_PWMLOAD_CH4SEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_PWMLOAD_CH4SEL), uint32_t) & BM_FTM_PWMLOAD_CH4SEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH4SEL field to a new value. +#define BW_FTM_PWMLOAD_CH4SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH4SEL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_PWMLOAD, field CH5SEL[5] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +//@{ +#define BP_FTM_PWMLOAD_CH5SEL (5U) //!< Bit position for FTM_PWMLOAD_CH5SEL. +#define BM_FTM_PWMLOAD_CH5SEL (0x00000020U) //!< Bit mask for FTM_PWMLOAD_CH5SEL. +#define BS_FTM_PWMLOAD_CH5SEL (1U) //!< Bit field size in bits for FTM_PWMLOAD_CH5SEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_PWMLOAD_CH5SEL field. +#define BR_FTM_PWMLOAD_CH5SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH5SEL)) +#endif + +//! @brief Format value for bitfield FTM_PWMLOAD_CH5SEL. +#define BF_FTM_PWMLOAD_CH5SEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_PWMLOAD_CH5SEL), uint32_t) & BM_FTM_PWMLOAD_CH5SEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH5SEL field to a new value. +#define BW_FTM_PWMLOAD_CH5SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH5SEL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_PWMLOAD, field CH6SEL[6] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +//@{ +#define BP_FTM_PWMLOAD_CH6SEL (6U) //!< Bit position for FTM_PWMLOAD_CH6SEL. +#define BM_FTM_PWMLOAD_CH6SEL (0x00000040U) //!< Bit mask for FTM_PWMLOAD_CH6SEL. +#define BS_FTM_PWMLOAD_CH6SEL (1U) //!< Bit field size in bits for FTM_PWMLOAD_CH6SEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_PWMLOAD_CH6SEL field. +#define BR_FTM_PWMLOAD_CH6SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH6SEL)) +#endif + +//! @brief Format value for bitfield FTM_PWMLOAD_CH6SEL. +#define BF_FTM_PWMLOAD_CH6SEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_PWMLOAD_CH6SEL), uint32_t) & BM_FTM_PWMLOAD_CH6SEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH6SEL field to a new value. +#define BW_FTM_PWMLOAD_CH6SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH6SEL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_PWMLOAD, field CH7SEL[7] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +//@{ +#define BP_FTM_PWMLOAD_CH7SEL (7U) //!< Bit position for FTM_PWMLOAD_CH7SEL. +#define BM_FTM_PWMLOAD_CH7SEL (0x00000080U) //!< Bit mask for FTM_PWMLOAD_CH7SEL. +#define BS_FTM_PWMLOAD_CH7SEL (1U) //!< Bit field size in bits for FTM_PWMLOAD_CH7SEL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_PWMLOAD_CH7SEL field. +#define BR_FTM_PWMLOAD_CH7SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH7SEL)) +#endif + +//! @brief Format value for bitfield FTM_PWMLOAD_CH7SEL. +#define BF_FTM_PWMLOAD_CH7SEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_PWMLOAD_CH7SEL), uint32_t) & BM_FTM_PWMLOAD_CH7SEL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CH7SEL field to a new value. +#define BW_FTM_PWMLOAD_CH7SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH7SEL) = (v)) +#endif +//@} + +/*! + * @name Register FTM_PWMLOAD, field LDOK[9] (RW) + * + * Enables the loading of the MOD, CNTIN, and CV registers with the values of + * their write buffers. + * + * Values: + * - 0 - Loading updated values is disabled. + * - 1 - Loading updated values is enabled. + */ +//@{ +#define BP_FTM_PWMLOAD_LDOK (9U) //!< Bit position for FTM_PWMLOAD_LDOK. +#define BM_FTM_PWMLOAD_LDOK (0x00000200U) //!< Bit mask for FTM_PWMLOAD_LDOK. +#define BS_FTM_PWMLOAD_LDOK (1U) //!< Bit field size in bits for FTM_PWMLOAD_LDOK. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the FTM_PWMLOAD_LDOK field. +#define BR_FTM_PWMLOAD_LDOK(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_LDOK)) +#endif + +//! @brief Format value for bitfield FTM_PWMLOAD_LDOK. +#define BF_FTM_PWMLOAD_LDOK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_FTM_PWMLOAD_LDOK), uint32_t) & BM_FTM_PWMLOAD_LDOK) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the LDOK field to a new value. +#define BW_FTM_PWMLOAD_LDOK(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_LDOK) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// hw_ftm_t - module struct +//------------------------------------------------------------------------------------------- +/*! + * @brief All FTM module registers. + */ +#ifndef __LANGUAGE_ASM__ +#pragma pack(1) +typedef struct _hw_ftm +{ + __IO hw_ftm_sc_t SC; //!< [0x0] Status And Control + __IO hw_ftm_cnt_t CNT; //!< [0x4] Counter + __IO hw_ftm_mod_t MOD; //!< [0x8] Modulo + struct { + __IO hw_ftm_cnsc_t CnSC; //!< [0xC] Channel (n) Status And Control + __IO hw_ftm_cnv_t CnV; //!< [0x10] Channel (n) Value + } CONTROLS[8]; + __IO hw_ftm_cntin_t CNTIN; //!< [0x4C] Counter Initial Value + __IO hw_ftm_status_t STATUS; //!< [0x50] Capture And Compare Status + __IO hw_ftm_mode_t MODE; //!< [0x54] Features Mode Selection + __IO hw_ftm_sync_t SYNC; //!< [0x58] Synchronization + __IO hw_ftm_outinit_t OUTINIT; //!< [0x5C] Initial State For Channels Output + __IO hw_ftm_outmask_t OUTMASK; //!< [0x60] Output Mask + __IO hw_ftm_combine_t COMBINE; //!< [0x64] Function For Linked Channels + __IO hw_ftm_deadtime_t DEADTIME; //!< [0x68] Deadtime Insertion Control + __IO hw_ftm_exttrig_t EXTTRIG; //!< [0x6C] FTM External Trigger + __IO hw_ftm_pol_t POL; //!< [0x70] Channels Polarity + __IO hw_ftm_fms_t FMS; //!< [0x74] Fault Mode Status + __IO hw_ftm_filter_t FILTER; //!< [0x78] Input Capture Filter Control + __IO hw_ftm_fltctrl_t FLTCTRL; //!< [0x7C] Fault Control + __IO hw_ftm_qdctrl_t QDCTRL; //!< [0x80] Quadrature Decoder Control And Status + __IO hw_ftm_conf_t CONF; //!< [0x84] Configuration + __IO hw_ftm_fltpol_t FLTPOL; //!< [0x88] FTM Fault Input Polarity + __IO hw_ftm_synconf_t SYNCONF; //!< [0x8C] Synchronization Configuration + __IO hw_ftm_invctrl_t INVCTRL; //!< [0x90] FTM Inverting Control + __IO hw_ftm_swoctrl_t SWOCTRL; //!< [0x94] FTM Software Output Control + __IO hw_ftm_pwmload_t PWMLOAD; //!< [0x98] FTM PWM Load +} hw_ftm_t; +#pragma pack() + +//! @brief Macro to access all FTM registers. +//! @param x FTM instance number. +//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, +//! use the '&' operator, like <code>&HW_FTM(0)</code>. +#define HW_FTM(x) (*(hw_ftm_t *) REGS_FTM_BASE(x)) +#endif + +#endif // __HW_FTM_REGISTERS_H__ +// v22/130726/0.9 +// EOF