mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pcd.c
- Revision:
- 226:b062af740e40
- Parent:
- 106:ced8cbb51063
--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pcd.c Wed Jun 11 09:30:07 2014 +0100 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pcd.c Wed Jun 11 09:45:09 2014 +0100 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f4xx_hal_pcd.c * @author MCD Application Team - * @version V1.0.0 - * @date 18-February-2014 + * @version V1.1.0RC2 + * @date 14-May-2014 * @brief PCD HAL module driver. * This file provides firmware functions to manage the following * functionalities of the USB Peripheral Controller: @@ -597,7 +597,7 @@ } /** * @brief Setup stage callback - * @param hpcd: ppp handle + * @param hpcd: PCD handle * @retval None */ __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) @@ -694,7 +694,7 @@ /** * @brief Disconnection event callbacks - * @param hpcd: ppp handle + * @param hpcd: PCD handle * @retval None */ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) @@ -726,8 +726,6 @@ /** * @brief Send an amount of data in blocking mode * @param hpcd: PCD handle - * @param pData: pointer to data buffer - * @param Size: amount of data to be sent * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) @@ -741,8 +739,6 @@ /** * @brief Send an amount of data in blocking mode * @param hpcd: PCD handle - * @param pData: pointer to data buffer - * @param Size: amount of data to be sent * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) @@ -1025,7 +1021,7 @@ /** * @brief Update FIFO configuration * @param hpcd: PCD handle - * @retval status + * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) { @@ -1069,7 +1065,7 @@ /** * @brief Update FIFO configuration * @param hpcd: PCD handle - * @retval status + * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) { @@ -1083,7 +1079,7 @@ /** * @brief HAL_PCD_ActiveRemoteWakeup : active remote wakeup signalling * @param hpcd: PCD handle - * @retval status + * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd) { @@ -1100,7 +1096,7 @@ /** * @brief HAL_PCD_DeActiveRemoteWakeup : de-active remote wakeup signalling * @param hpcd: PCD handle - * @retval status + * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd) { @@ -1122,7 +1118,7 @@ ##### Peripheral State functions ##### =============================================================================== [..] - This subsection permit to get in run-time the status of the peripheral + This subsection permits to get in run-time the status of the peripheral and the data flow. @endverbatim @@ -1131,7 +1127,7 @@ /** * @brief Return the PCD state - * @param hpcd : PCD handle + * @param hpcd: PCD handle * @retval HAL state */ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) @@ -1146,7 +1142,7 @@ * @brief DCD_WriteEmptyTxFifo * check FIFO for the next packet to be loaded * @param hpcd: PCD handle - * @retval status + * @retval HAL status */ static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) {